Michael Brown
295e11b2b0
Add INT 13,41 (extensions installation check). LILO's MBR now uses
...
linear calls to load the MS-DOS boot sector in my test setup.
2006-05-14 23:46:28 +00:00
Michael Brown
f25731d08f
Split "iSCSI as a SCSI device" out from "iSCSI as a TCP protocol".
2006-05-14 23:29:16 +00:00
Michael Brown
29fb77b0a4
Fix a couple of minor typos.
2006-05-14 18:17:29 +00:00
Michael Brown
6e42cb95bd
Also capture INT 19 as a failure path, to allow for boot sectors that
...
don't conform to BBS (e.g. the one created by mkdosfs).
2006-05-14 14:13:55 +00:00
Michael Brown
4435667a00
Add int13_boot(), to allow booting from INT 13 emulated drives.
2006-05-14 13:44:47 +00:00
Michael Brown
b4f941b257
Specify attributes on .text16.
2006-05-14 13:39:27 +00:00
Michael Brown
eb6b8e8d70
Handle the '"%c", 0' case correctly.
2006-05-14 11:55:30 +00:00
Michael Brown
efd6281a35
Correctly handle zero-length buffers.
2006-05-14 11:18:42 +00:00
Michael Brown
25f5d114a0
Updated documentation.
...
Shaved around 100 bytes off vsprintf.o. It's now 50 bytes smaller than
the old implementation and provides much more conformant semantics,
including the ability to return the number of characters that would have
been printed to the string had the buffer been big enough. (iSCSI needs
this functionality).
2006-05-14 03:31:20 +00:00
Michael Brown
2421723a15
Rewrote printf and friends to better support standard C semantics.
2006-05-14 02:51:55 +00:00
Michael Brown
f99e7a375e
At least cope with "%llx" by reading the correct-sized va_arg from the
...
stack, even if we don't yet print it out.
At some point, vsprintf() needs to be fixed up so that it can correctly
cope with limited-sized buffers (i.e. vsnprintf), long longs, and
standard format specifiers (e.g. "%04x"). We should also remove the
special types (MAC addresses and IP addresses). This would then enable
us to use gcc's ability to type-check printf format strings.
2006-05-13 11:50:52 +00:00
Michael Brown
21493646c2
Moved to net/tcp/iscsi.c.
2006-05-13 11:45:49 +00:00
Michael Brown
5080668704
Provide access to rm_cs and rm_ds from protected-mode code.
2006-05-13 11:45:31 +00:00
Michael Brown
dc8d429ec6
Provide a global counter for the number of interrupts hooked.
2006-05-13 11:44:53 +00:00
Michael Brown
63499e9cfd
Allow re-entrancy and provide a global counter of the number of
...
interrupts hooked.
2006-05-13 11:44:11 +00:00
Michael Brown
d822b3d4cd
Define BIOS data segment in bios.h
2006-05-13 11:43:07 +00:00
Michael Brown
a27defa483
Add flag definitions.
2006-05-13 11:42:07 +00:00
Michael Brown
d2c22ec9bb
Add INT 13 emulation layer (which provides an interface to gPXE block
...
devices).
2006-05-13 11:41:36 +00:00
Michael Brown
1ad72e0e79
Add 64-bit byte-swapping operations.
2006-05-13 11:40:39 +00:00
Michael Brown
5009f8d6a2
Provide a SCSI device interface to the iSCSI protocol
2006-05-13 11:39:46 +00:00
Michael Brown
f33f01c126
Defined SCSI device interface, and added SCSI block device
...
implementation.
2006-05-13 11:37:50 +00:00
Michael Brown
8638a5e471
Defined a block device interface.
2006-05-13 11:36:30 +00:00
Michael Brown
1838b58c3f
Add drivers/block and arch/i386/interface/pcbios
2006-05-13 11:35:29 +00:00
Michael Brown
568cad0ddc
(Redoing check-in lost by SourceForge's failure.)
2006-05-13 11:30:03 +00:00
Michael Brown
8a229a16f6
(Redoing check-in lost by SourceForge's failure.)
...
Moved to net/
2006-05-13 11:24:25 +00:00
Michael Brown
847f38f4ac
(Redoing check-in lost by SourceForge's failure.)
...
Add method for hooking real-mode interrupt vectors.
2006-05-13 11:19:06 +00:00
Michael Brown
f7b963da51
(Redoing check-in lost by SourceForge's failure.)
...
Use .text16.data section with "aw" attributes, to avoid section type
conflicts when placing both code and data into .text16.
Add __from_{text16,data16}.
2006-05-13 11:11:55 +00:00
Michael Brown
97d265f8dc
(Redoing check-in lost by SourceForge's failure.)
...
Avoid optimisation errors under -fstrict-aliasing.
2006-05-13 11:10:24 +00:00
Michael Brown
10606e95b3
Added tunctl (since it is difficult to find for many distros).
2006-05-13 09:27:54 +00:00
Michael Brown
fdb983d473
Preserve the whole of %esp across prot_call(). We have to split this
...
between the low half stored in the static variable rm_sp, and the high
half stored on the prot_call() stack, because:
Just using the stack would screw up when a prot_call()ed routine
executes a real_call(); it would have no way to find the current top of
the RM stack.
Extending rm_sp to rm_esp would not be safe, because the guarantee that
rm_sp must return to the correct value by the time an external
real-mode call returns applies only to %sp, not to %esp.
2006-05-06 19:44:23 +00:00
Michael Brown
f8e087767b
Allow access to variables in .text16 as well as .data16. Chained
...
interrupt vectors, for example, will be easiest to handle if placed in
.text16.
2006-05-06 18:57:31 +00:00
Michael Brown
c10d1aa9d7
Preserve GDT across prot_call().
2006-05-06 18:52:27 +00:00
Michael Brown
dcc1b0054e
This line should not have been checked in
2006-05-04 23:22:42 +00:00
Michael Brown
832807726a
Add infrastructure to support access to .data16 (and .text16) variables
...
from protected-mode code.
Set up %ds to point to .data16 in prot_to_real, so that code specified
via REAL_EXEC() and friends can access variables in .data16.
Move most real-mode librm variables from .text16 to .data16.
2006-05-04 23:14:06 +00:00
Michael Brown
f4429533a6
Added methods for efficiently declaring and accessing variables in
...
.data16. librm will need to supply "char *data16", i.e. the virtual
address of the start of .data16.
2006-05-04 17:00:20 +00:00
Michael Brown
f8f75cef5b
BSS is now zeroed by libprefix (along with the otherwise non-zeroable
...
portions such as the stack) during the installation process.
init_fns() are called from main(). We need to think about initial
control flow some more.
2006-05-02 21:10:45 +00:00
Michael Brown
cc23057b59
Typo
2006-05-02 21:09:29 +00:00
Michael Brown
10c28a51bd
Create two easy-to-use entry points in libprefix: install and
...
install_prealloc. I *think* these will suffice for all the 16-bit
prefixes.
2006-05-02 20:51:07 +00:00
Michael Brown
9e1dd6402d
<name>_size variable is no longer needed, since we don't copy the code.
...
However, it's worth adding a .size directive so that objdump reports the
correct sizes for the code fragments.
2006-05-02 16:38:46 +00:00
Michael Brown
9fcded3d23
Towards a(nother) new real-mode infrastructure, in which we take
...
advantage of the fact that we have to have a permanently-resident block
in base memory.
2006-05-02 15:41:21 +00:00
Michael Brown
8f62b39c03
Move stack out to separate object, so that having a stack doesn't drag in
...
setup.S.
2006-05-02 14:57:48 +00:00
Michael Brown
5463169c1a
Verified as working
2006-05-02 14:04:21 +00:00
Michael Brown
d081d65d48
This should be much more elegant: we use flat real mode for the
...
highmem data, so decompress16 will be able to unpack blocks bigger
than 64kB.
2006-05-01 22:35:19 +00:00
Michael Brown
cc8821a443
Checking in because I don't want to lose this rather neat code for
...
running the decompresser in 16:16 protected mode using the real-mode
stack. However, there's an even simpler way to do it...
2006-05-01 21:26:44 +00:00
Michael Brown
2462047128
Typo
2006-04-30 18:19:39 +00:00
Michael Brown
9e1becaf8a
Merge TCP aborted(), timedout() and closed() methods into a single
...
closed() method with a reason code.
2006-04-30 16:59:45 +00:00
Michael Brown
8afb6303fb
Half-way tidy
2006-04-30 15:23:29 +00:00
Michael Brown
04b6a1e004
Make all TCP methods optional; at least FTP data is a read-only
...
connection and so legitimately ignores acked() and senddata().
2006-04-30 13:20:40 +00:00
Michael Brown
aec0e127d2
Proof-of-concept FTP implementation
2006-04-30 12:02:07 +00:00
Michael Brown
a42092d2a0
Add a temporary snprintf, so that safely-written code can at least
...
compile, even if it won't yet be safe.
2006-04-30 12:01:31 +00:00