Fix problem where tc grants always were sent to the last peer to send traffic

Fix issue where TC requests would be remembered not at all and then forever
Fix output to have a newline in packet
2013-04-08 13:35:17 -04:00 · 2013-04-08 10:33:50 -04:00 · 2013-04-08 14:29:46 +00:00 · 2013-04-08 14:29:46 +00:00 · 2013-04-08 14:29:46 +00:00 · 2013-04-08 08:38:15 +00:00
2056 changed files with 52584 additions and 143585 deletions
@@ -1 +1 @@
-2.8.4
+2.9
@@ -0,0 +1,241 @@
+#!/bin/sh
+# Update GSA Ubuntu Repositories or create a local repository
+#
+# Author: Leonardo Tonetto (tonetto@linux.vnet.ibm.com)
+# Revisor: Arif Ali (aali@ocf.co.uk)
+#
+# After running this script, add the following line to
+# /etc/apt/sources.list for local repository
+# deb file://<core_repo_path>/xcat-core/ maverick main
+# deb file://<dep_repo_path>/xcat-dep/ maverick main
+# 
+
+# For the purpose of getting the distribution name
+
+# Supported distributions
+dists="squeeze"
+
+a_flag=            # automatic flag - only update if repo was updated
+c_flag=            # xcat-core (trunk-delvel) path
+d_flag=            # xcat-dep (trunk) path
+local_flag=        # build the repository localy
+
+while getopts 'c:d:u:p:l:a' OPTION
+do
+    case $OPTION in
+	c)    c_flag=1
+	        xcat_core_path="$OPTARG"
+	        ;;
+	d)    d_flag=1
+	        xcat_dep_path="$OPTARG"
+	        ;;
+	l)    local_flag=1
+	        local_repo_path="$OPTARG"
+	        ;;
+	a)    a_flag=1
+	        ;;
+
+	?) printf "Usage: %s -c <core_trunk_path> [-d <dep_trunk_path>] -l <local-repo_path> [-a]\n" $(basename $0) >&2
+	    echo "-a        Automatic: update only if there's any update on repo"
+	    exit 2
+	    ;;
+    esac
+done
+shift $(($OPTIND - 1))
+
+if [ -z "$c_flag" -a -z "$d_flag" ]
+then
+    printf "Usage: %s -c <core_trunk_path> [-d <dep_trunk_path>] { -l <local-repo_path> | [-u <gsa_id> -p <gsa_passwd>] } [-a]\n" $(basename $0) >&2
+    echo "-a        Automatic: update only if there's any update on repo"
+    exit 2
+fi
+if [ ! -d $xcat_core_path ]
+then
+    printf "%s: No such directory\n" "$xcat_core_path" >&2
+    exit 2
+fi
+
+if [ "$d_flag" ]
+then
+    if [ ! -d $xcat_dep_path ]
+    then
+	printf "%s: No such directory\n" "$xcat_dep_path" >&2
+	exit 2
+    fi
+fi
+
+if [ "$local_flag" ]
+then
+    repo_xcat_core_path=$local_repo_path"/xcat-core"
+    repo_xcat_dep_path=$local_repo_path"/xcat-dep"
+else
+    printf "Usage: %s -c <core_trunk_path> [-d <dep_trunk_path>] -l <local-repo_path> [-a]\n" $(basename $0) >&2
+    echo "-a        Automatic: update only if there's any update on repo"
+    exit 2
+fi
+
+if [ "$a_flag" ]
+then
+    touch svcupdate.trace
+    SVCUP='svcupdate.trace'
+    svn update $xcat_core_path 1> $SVCUP 2>&1
+    if ! grep 'Tree is up to date' $SVCUP
+    then
+	update_core=1
+    else
+	update_core=
+    fi
+    rm -f $SVCUP
+else
+    update_core=1
+fi
+if [ "$c_flag" -a "$update_core" ]
+then
+    echo "###############################"
+    echo "# Building xcat-core packages #"
+    echo "###############################"
+
+    CMD_PATH=`pwd`
+    cd $xcat_core_path
+    ./build-debs-all "snap" "Nightly_Builds"
+
+    echo "#################################"
+    echo "# Creating xcat-core repository #"
+    echo "#################################"
+
+    if [ -d $repo_xcat_core_path ]; then
+    	rm -rf $repo_xcat_core_path
+    fi
+    mkdir -p $repo_xcat_core_path/conf
+
+    find . -iname '*.deb' -exec mv {} $repo_xcat_core_path \;
+
+    rm -rf debs/
+    cd $CMD_PATH
+
+    rm -rf $repo_xcat_core_path/conf/distributions
+
+    for dist in $dists; do
+       cat << __EOF__ >> $repo_xcat_core_path/conf/distributions
+Origin: xCAT internal repository
+Label: xcat-core bazaar repository
+Codename: $dist
+Architectures: amd64 
+Components: main
+Description: Repository automatically genereted conf 
+
+__EOF__
+     done
+
+    cat << __EOF__ > $repo_xcat_core_path/conf/options
+verbose
+basedir .
+__EOF__
+
+    for dist in $dists; do
+      for file in `ls $repo_xcat_core_path/*.deb`; do
+	reprepro -b $repo_xcat_core_path includedeb $dist $file;
+      done
+    done
+
+    mv $xcat_core_path/latest_version $repo_xcat_core_path/xcat-core_latest-build
+
+    cat << '__EOF__' > $repo_xcat_core_path/mklocalrepo.sh
+codename=`lsb_release -a 2>null | grep Codename | awk '{print $2}'`
+cd `dirname $0`
+echo deb file://"`pwd`" $codename main > /etc/apt/sources.list.d/xcat-core.list
+__EOF__
+
+    chmod 775 $repo_xcat_core_path/mklocalrepo.sh
+    rm -rf $repo_xcat_core_path/*.deb
+
+    if [ -z "$local_flag" ]
+    then
+	echo "###############################"
+	echo "# Updating GSA xcat-core repo #"
+	echo "###############################"
+	lftp -e "mirror -R --delete-first $repo_xcat_core_path /projects/i/ipl-xcat/ubuntu/; exit;" -u $gsa_id,$gsa_passwd -p 22 sftp://ausgsa.ibm.com
+    fi   ### if [ -z "$local_flag" ]
+fi    ### if [ "$a_flag" ]
+
+if [ "$a_flag" -a "$d_flag" ]
+then
+    touch svcupdate.trace
+    SVCUP='svcupdate.trace'
+    svn update $xcat_dep_path 1> $SVCUP 2>&1
+    if ! grep 'Tree is up to date' $SVCUP
+    then
+	update_dep=1
+    else
+	update_dep=
+    fi
+    rm -f $SVCUP
+else
+    update_dep=1
+fi
+if [ "$d_flag" -a "$update_dep" ]
+then
+    echo "##############################"
+    echo "# Building xcat-dep packages #"
+    echo "##############################"
+
+    CMD_PATH=`pwd`
+    cd $xcat_dep_path
+    ./build-debs-all "snap" "Nightly_Builds"
+
+    echo "################################"
+    echo "# Creating xcat-dep repository #"
+    echo "################################"
+    rm -rf $repo_xcat_dep_path
+    mkdir -p $repo_xcat_dep_path/conf
+    find $xcat_dep_path -iname '*.deb' -exec cp {} $repo_xcat_dep_path \;
+
+    rm -rf $repo_xcat_core_path/conf/distributions
+
+    for dist in $dists; do
+    cat << __EOF__ >> $repo_xcat_dep_path/conf/distributions
+Origin: xCAT internal repository
+Label: xcat-dep bazaar repository
+Codename: $dist
+Architectures: i386 amd64 
+Components: main
+Description: Repository automatically genereted conf 
+
+__EOF__
+done
+
+    cat << __EOF__ > $repo_xcat_dep_path/conf/options
+verbose
+basedir .
+__EOF__
+
+    for dist in $dists; do
+      for file in `ls $repo_xcat_dep_path/*.deb`; do
+	reprepro -b $repo_xcat_dep_path includedeb $dist $file;
+      done
+    done
+
+    cat << '__EOF__' > $repo_xcat_dep_path/mklocalrepo.sh
+codename=`lsb_release -a 2>null | grep Codename | awk '{print $2}'`
+cd `dirname $0`
+echo deb file://"`pwd`" $codename main > /etc/apt/sources.list.d/xcat-dep.list
+__EOF__
+
+    chmod 775 $repo_xcat_dep_path/mklocalrepo.sh
+    rm -rf $repo_xcat_dep_path/*.deb
+
+    if [ -z "$local_flag" ]
+    then
+	echo "##############################"
+	echo "# Updating GSA xcat-dep repo #"
+	echo "##############################"
+	lftp -e "mirror -R --delete-first $repo_xcat_dep_path /projects/i/ipl-xcat/ubuntu/; exit;" -u $gsa_id,$gsa_passwd -p 22 sftp://ausgsa.ibm.com
+    fi   ### if [ -z "$local_flag" ]
+fi   ### if [ "$d_flag" -a "$a_flag"]
+
+if [ -z "$local_flag" ]                 # delete the temp repo after upload is done
+then
+    rm -rf ./gsa-repo_temp
+fi
+
+exit 0
@@ -41,19 +41,8 @@ printusage()
 # For the purpose of getting the distribution name
 . /etc/lsb-release

-# Process cmd line variable assignments, assigning each attr=val pair to a variable of same name
-for i in $*; do
-        echo $i | grep '='
-        if [ $? != 0 ];then
-            continue
-        fi
-        # upper case the variable name
-        varstring=`echo "$i"|cut -d '=' -f 1|tr '[a-z]' '[A-Z]'`=`echo "$i"|cut -d '=' -f 2`
-        export $varstring
-done
-
 # Supported distributions
-dists="maverick natty oneiric precise saucy"
+dists="maverick natty oneiric precise"

 c_flag=            # xcat-core (trunk-delvel) path
 d_flag=            # xcat-dep (trunk) path
@@ -86,7 +75,7 @@ if [ "$c_flag" -a "$d_flag" ];then
    exit 2
 fi

-uploader="ligc"
+uploader="bp-sawyers"
 # Find where this script is located to set some build variables
 old_pwd=`pwd`
 cd `dirname $0`
@@ -102,6 +91,14 @@ local_dep_repo_path="$curdir/../../../xcat-dep/xcat-dep"
 sf_repo_url="https://sourceforge.net/projects/xcat/files/ubuntu"
 sf_dir="/home/frs/project/x/xc/xcat"

+if [ "$PROMOTE" = 1 ]; then
+    upload_dir="xcat-core"
+    tar_name="xcat-core-$ver.tar.bz2"
+else
+    upload_dir="core-snap"
+    tar_name="core-debs-snap.tar.bz2"
+fi
+
 #use flock to only one person build at the same time
 # Get a lock, so can not do 2 builds at once
 exec 8>/var/lock/xcatbld.lock
@@ -131,111 +128,69 @@ then
        REL=`basename $t`
    fi

+    #get the version
+    echo "svn --quiet update Version"
+    svn --quiet up Version
    ver=`cat Version`
-    if [ "$PROMOTE" != 1 ]; then
-        code_change=0
-        update_log=''
-        #get the version
-        if [ "$REL" = "xcat-core" ];then
-            git_flag=1
-            REL=`git rev-parse --abbrev-ref HEAD`
-            if [ "$REL" = "master" ]; then
-                REL="devel"
-            fi
-            if [ -z "$GITUP" ];then
-                update_log=../coregitup
-                echo "git pull > $update_log"
-                git pull > $update_log
-            else
-                update_log=$GITUP
-            fi
+    short_ver=`cat Version|cut -d. -f 1,2`
+    short_short_ver=`cat Version|cut -d. -f 1`

-            if ! grep -q  'Already up-to-date' $update_log; then
-                code_change=1
-            fi
-        else
-            git_flag=0
-            if [ -z "$SVNUP" ];	then
-                update_log=../coresvnup
-                echo "svn up > $update_log"
-                svn up > $update_log
-            else
-                update_log=$SVNUP
-            fi
+    #TODO: define the core path and tarball name
+    tarball_name="core-debs-snap.tar.bz2"

-            if ! grep -q 'At revision' $update_log;then
-                code_change=1
-            fi
-        fi
-        ver=`cat Version`
-        short_ver=`cat Version|cut -d. -f 1,2`
-        short_short_ver=`cat Version|cut -d. -f 1`
+    #update the code from svn
+    svn_up_log="../coresvnup"
+    echo "svn update > $svn_up_log"
+    svn update > $svn_up_log

-        package_dir_name=debs$REL
-        #TODO: define the core path and tarball name
-        tarball_name="core-debs-snap.tar.bz2"
+    #makesure the code change status
+    code_change=0
+    if ! grep -q 'At revision' $svn_up_log;then
+        code_change=1
+    fi

-        if [ $code_change == 0 -a "$UP" != 1 -a "$BUILDALL" != 1 ]; then
-            echo "Nothing new detected"
-            exit 0
-        fi
+    if [ $code_change == 0 -a "$UP" != 1 -a "$BUILDALL" != 1 ]; then
+        echo "Nothing new detected"
+        exit 0
+    fi
+    echo "###############################"
+    echo "# Building xcat-core packages #"
+    echo "###############################"

-        echo "###############################"
-        echo "# Building xcat-core packages #"
-        echo "###############################"
-
-        #the package type:  local | snap | alpha
-        #the build introduce stirng
-        pkg_type="snap"
-        build_string="Snap_Build"
-        cur_date=`date +%Y%m%d`
-        pkg_version="${short_ver}-${pkg_type}${cur_date}"
+    #the package type:  local | snap | alpha
+    #the build introduce stirng
+    pkg_type="snap"
+    build_string="Snap_Build"
+    cur_date=`date +%Y%m%d`
+    pkg_version="${short_ver}-${pkg_type}${cur_date}"
    
-        if [ ! -d ../../$package_dir_name ];then
-            mkdir -p "../../$package_dir_name"
-        fi
-        packages="xCAT-client xCAT-genesis-scripts perl-xCAT xCAT-server xCAT-UI xCAT xCATsn xCAT-test xCAT-OpenStack xCAT-OpenStack-baremetal"
-
-        for file in `echo $packages`
-        do
-            file_low=`echo $file | tr '[A-Z]' '[a-z]'`
-            if grep -q $file $update_log || [ "$BUILDALL" == 1 -o "$file" = "perl-xCAT" ]; then
-                rm -f ../../$package_dir_name/${file_low}_*.deb
-                #only for genesis package
-                rm -f ../../$package_dir_name/${file_low}-amd64_*.deb
-                cd $file
-                dch -v $pkg_version -b -c debian/changelog $build_string
-                dpkg-buildpackage -uc -us
-                rc=$?
-                if [ $rc -gt 0 ]; then
-                    echo "Error: $file build package failed exit code $rc"
-                fi
-                cd -
-                find $file -maxdepth 3 -type d -name "${file_low}*" | grep debian | xargs rm -rf
-                find $file -maxdepth 3 -type f -name "files" | grep debian | xargs rm -rf
-                mv ${file_low}* ../../$package_dir_name/
-            fi
-        done
-
-        find ../../$package_dir_name/* ! -name *.deb | xargs rm -f
-    else
-        if [ "$REL" = "xcat-core" ];then
-            git_flag=1
-            REL=`git rev-parse --abbrev-ref HEAD`
-            if [ "$REL" = "master" ]; then
-                REL="devel"
-            fi
-        fi
-        package_dir_name=debs$REL
+    if [ ! -d ../../debs ];then
+        mkdir -p "../../debs"
    fi
+    packages="xCAT-client xCAT-genesis-scripts perl-xCAT xCAT-server xCAT-UI xCAT xCATsn xCAT-test"

-    if [ "$PROMOTE" = 1 ]; then
-        upload_dir="xcat-core"
-        tar_name="xcat-core-$ver.tar.bz2"
-    else
-        upload_dir="core-snap"
-        tar_name="core-debs-snap.tar.bz2"
-    fi
+    for file in `echo $packages`
+    do
+        file_low=`echo $file | tr '[A-Z]' '[a-z]'`
+        if grep -q $file $svn_up_log || [ "$BUILDALL" == 1 ]; then
+            rm -f ../../debs/${file_low}_*.deb
+            #only for genesis package
+            rm -f ../../debs/${file_low}-amd64_*.deb
+            cd $file
+            dch -v $pkg_version -b -c debian/changelog $build_string
+            dpkg-buildpackage -uc -us
+            rc=$?
+            if [ $rc -gt 0 ]; then
+                echo "Error: $file build package failed exit code $rc"
+            fi
+            cd -
+            find $file -maxdepth 3 -type d -name "${file_low}*" | grep debian | xargs rm -rf
+            find $file -maxdepth 3 -type f -name "files" | grep debian | xargs rm -rf
+            mv ${file_low}* ../../debs/
+        fi
+    done
+
+    find ../../debs/* ! -name *.deb | xargs rm -f

    echo "#################################"
    echo "# Creating xcat-core repository #"
@@ -254,7 +209,7 @@ then
 Origin: xCAT internal repository
 Label: xcat-core bazaar repository
 Codename: $dist
-Architectures: amd64 
+Architectures: amd64 i386 
 Components: main
 Description: Repository automatically genereted conf 
 SignWith: yes
@@ -270,16 +225,16 @@ __EOF__

    #import the deb packages into the repo
    for dist in $dists; do
-      for file in `ls ../$package_dir_name/*.deb`; do
+      for file in `ls ../debs/*.deb`; do
 	reprepro -b ./ includedeb $dist $file;
      done
    done

    #create the mklocalrepo script
-    cat << '__EOF__' > mklocalrepo.sh
+    cat << __EOF__ > mklocalrepo.sh
 . /etc/lsb-release
 cd `dirname $0`
-echo deb [arch=amd64] file://"`pwd`" $DISTRIB_CODENAME main > /etc/apt/sources.list.d/xcat-core.list
+echo deb file://"`pwd`" $DISTRIB_CODENAME main > /etc/apt/sources.list.d/xcat-core.list
 __EOF__

    chmod 775 mklocalrepo.sh
@@ -292,12 +247,12 @@ __EOF__
        groupadd xcat
    fi     

-    chgrp -R root xcat-core
+    chgrp -R xcat xcat-core
    chmod -R g+w xcat-core

    #build the tar ball
    tar -hjcf $tar_name xcat-core
-    chgrp root $tar_name
+    chgrp xcat $tar_name
    chmod g+w $tar_name

    if [ ! -e core-snap ]; then
@@ -305,7 +260,7 @@ __EOF__
    fi

    # Decide whether to upload or not
-    if [ -n "$UP" ] && [ "$UP" == 0 ]; then
+    if [ "$UP" != 1 ]; then
        echo "No need to upload"
        cd $old_pwd
        exit 0
@@ -320,13 +275,8 @@ __EOF__
    fi

    #upload the tar ball
-    #for the GA build, upload to https://sourceforge.net/projects/xcat/files/xcat/<version>.x_Ubuntu/
-    #for other scenario, upload to https://sourceforge.net/projects/xcat/files/ubuntu/<version>
    if [ "$PROMOTE" = 1 -a "$REL" != "devel" -a "$PREGA" != 1 ]; then
-        i=0
-        echo "Uploading $tar_name to ${sf_dir}/xcat/${REL}.x_Ubuntu/ ..."
-        while [ $((i+=1)) -le 5 ] && ! rsync -v $tar_name ${uploader},xcat@web.sourceforge.net:${sf_dir}/xcat/${REL}.x_Ubuntu/
-        do : ; done
+        echo "";
    else
        i=0
        echo "Uploading $tar_name to ${sf_dir}/ubuntu/${REL}/ ..."
@@ -357,7 +307,7 @@ then
 Origin: xCAT internal repository
 Label: xcat-dep bazaar repository
 Codename: $dist
-Architectures: amd64 
+Architectures: i386 amd64 
 Components: main
 Description: Repository automatically genereted conf 
 SignWith: yes
@@ -380,7 +330,7 @@ __EOF__
    cat << '__EOF__' > mklocalrepo.sh
 . /etc/lsb-release
 cd `dirname $0`
-echo deb [arch=amd64] file://"`pwd`" $DISTRIB_CODENAME main > /etc/apt/sources.list.d/xcat-dep.list
+echo deb file://"`pwd`" $DISTRIB_CODENAME main > /etc/apt/sources.list.d/xcat-dep.list
 __EOF__

    chmod 775 mklocalrepo.sh
@@ -392,16 +342,16 @@ __EOF__
        groupadd xcat
    fi

-    chgrp -R root xcat-dep
+    chgrp -R xcat xcat-dep
    chmod -R g+w xcat-dep

    #create the tar ball
    dep_tar_name=xcat-dep-ubuntu.tar.bz
    tar -hjcf $dep_tar_name xcat-dep
-    chgrp root $dep_tar_name
+    chgrp xcat $dep_tar_name
    chmod g+w $dep_tar_name

-    if [ -n "$UP" ] && [ "$UP" == 0 ];then
+    if [ "$UP" != 1 ];then
        echo "No need to upload the dep packages"
        cd $old_pwd
        exit 0
@@ -413,10 +363,6 @@ __EOF__
    while [ $((i+=1)) -le 5 ] && ! rsync -urLv --delete xcat-dep ${uploader},xcat@web.sourceforge.net:${sf_dir}/ubuntu/
         do : ; done
    #upload the tarball
-    i=0
-    echo "Uploading $dep_tar_name to ${sf_dir}/xcat-dep/2.x_Ubuntu/ ..."
-    while [ $((i+=1)) -le 5 ] && ! rsync -v $dep_tar_name ${uploader},xcat@web.sourceforge.net:${sf_dir}/xcat-dep/2.x_Ubuntu/
-    do : ; done
    cd $old_pwd
 fi
 exit 0
@@ -19,7 +19,6 @@
 #    directories that are needed.

 # Usage:  buildcore.sh [attr=value attr=value ...]
-#       Before running buildcore.sh, you must change the local git repo to the branch you want built, using: git checkout <branch>
 #		PROMOTE=1 - if the attribute "PROMOTE" is specified, means an official dot release.  This does not
 #					actually build xcat, just uploads the most recent snap build to https://sourceforge.net/projects/xcat/files/xcat/ .
 #					If not specified, a snap build is assumed, which uploads to https://sourceforge.net/projects/xcat/files/yum/
@@ -32,7 +31,7 @@
 #		BUILDALL=1 - build all rpms, whether they changed or not.  Should be used for snap builds that are in prep for a release.
 # 		UP=0 or UP=1 - override the default upload behavior 
 # 		SVNUP=<filename> - control which rpms get built by specifying a coresvnup file
-# 		GITUP=<filename> - control which rpms get built by specifying a coregitup file
+#       FRSYUM=0 - put the yum repo and snap builds in the old project web area instead of the FRS area.
 #		EMBED=<embedded-environment> - the environment for which a minimal version of xcat should be built, e.g. zvm or flex
 #		VERBOSE=1 - to see lots of verbose output

@@ -41,13 +40,11 @@ UPLOADUSER=bp-sawyers
 FRS=/home/frs/project/x/xc/xcat

 # These are the rpms that should be built for each kind of xcat build
-ALLBUILD="perl-xCAT xCAT-client xCAT-server xCAT-IBMhpc xCAT-rmc xCAT-UI xCAT-test xCAT-buildkit xCAT xCATsn xCAT-genesis-scripts xCAT-OpenStack xCAT-SoftLayer xCAT-OpenStack-baremetal"
+ALLBUILD="perl-xCAT xCAT-client xCAT-server xCAT-IBMhpc xCAT-rmc xCAT-UI xCAT-test xCAT-buildkit xCAT xCATsn xCAT-genesis-scripts"
 ZVMBUILD="perl-xCAT xCAT-server xCAT-UI"
 ZVMLINK="xCAT-client xCAT xCATsn"
-# xCAT has PCM specific configuration - conserver-xcat, syslinux-xcat
-# xCAT-server has PCM specific configuration - RESTAPI(perl-JSON) 
-PCMBUILD="xCAT xCAT-server"
-PCMLINK="perl-xCAT xCAT-client xCAT-buildkit xCAT-genesis-scripts-x86_64"
+PCMBUILD="xCAT"
+PCMLINK="perl-xCAT xCAT-client xCAT-server xCAT-buildkit xCAT-genesis-scripts-x86_64"
 # Note: for FSM, the FlexCAT rpm is built separately from gsa/git
 FSMBUILD="perl-xCAT xCAT-client xCAT-server"
 FSMLINK=""
@@ -87,24 +84,15 @@ if [ "$OSNAME" != "AIX" ]; then
 	export HOME=/root		# This is so rpm and gpg will know home, even in sudo
 fi

-# for the git case, query the current branch and set REL (changing master to devel if necessary)
-function setbranch {
-	#git checkout $BRANCH
-	#REL=`git rev-parse --abbrev-ref HEAD`
-	REL=`git name-rev --name-only HEAD`
-	if [ "$REL" = "master" ]; then
-		REL="devel"
-	fi
-}
-
-if [ "$REL" = "xcat-core" ]; then			# using git
-	GIT=1
-	setbranch			# this changes the REL variable
+# this is needed only when we are transitioning the yum over to frs
+if [ "$FRSYUM" != 0 ]; then
+	YUMDIR=$FRS
+	YUMREPOURL="https://sourceforge.net/projects/xcat/files/yum"
+else
+	YUMDIR=htdocs
+	YUMREPOURL="http://xcat.sourceforge.net/yum"
 fi

-YUMDIR=$FRS
-YUMREPOURL="https://sourceforge.net/projects/xcat/files/yum"
-
 # Set variables based on which type of build we are doing
 if [ -n "$EMBED" ]; then
 	EMBEDDIR="/$EMBED"
@@ -128,38 +116,38 @@ else
 fi

 XCATCORE="xcat-core"		# core-snap is a sym link to xcat-core
-
-if [ "$GIT" = "1" ]; then			# using git - need to include REL in the path where we put the built rpms
-	DESTDIR=../../$REL$EMBEDDIR/$XCATCORE
+echo "svn --quiet up Version"
+svn --quiet up Version
+VER=`cat Version`
+SHORTVER=`cat Version|cut -d. -f 1,2`
+SHORTSHORTVER=`cat Version|cut -d. -f 1`
+if [ "$PROMOTE" = 1 ]; then
+	CORE="xcat-core"
+	if [ "$OSNAME" = "AIX" ]; then
+		TARNAME=core-aix-$VER.tar.gz
+	else
+		TARNAME=xcat-core-$VER.tar.bz2
+	fi
 else
-	DESTDIR=../..$EMBEDDIR/$XCATCORE
+	CORE="core-snap"
+	if [ "$OSNAME" = "AIX" ]; then
+		TARNAME=core-aix-snap.tar.gz
+	else
+		TARNAME=core-rpms-snap.tar.bz2
+	fi
 fi
+DESTDIR=../..$EMBEDDIR/$XCATCORE
 SRCD=core-snap-srpms

 # currently aix builds ppc rpms, but someday it should build noarch
 if [ "$OSNAME" = "AIX" ]; then
 	NOARCH=ppc
-	SYSGRP=system
 else
 	NOARCH=noarch
-	SYSGRP=root
 fi

-function setversionvars {
-	VER=`cat Version`
-	SHORTVER=`cat Version|cut -d. -f 1,2`
-	SHORTSHORTVER=`cat Version|cut -d. -f 1`
-}
-

 if [ "$PROMOTE" != 1 ]; then      # very long if statement to not do builds if we are promoting
-# we are doing a snap build
-CORE="core-snap"
-if [ "$OSNAME" = "AIX" ]; then
-	TARNAME=core-aix-snap.tar.gz
-else
-	TARNAME=core-rpms-snap.tar.bz2
-fi
 mkdir -p $DESTDIR
 SRCDIR=$DESTDIR/../$SRCD
 mkdir -p $SRCDIR
@@ -180,37 +168,16 @@ else
 	#echo "source=$source"
 fi

-# If they have not given us a premade update file, do an svn update or git pull and capture the results
-SOMETHINGCHANGED=0
-if [ "$GIT" = "1" ]; then			# using git
-	if [ -z "$GITUP" ]; then
-		GITUP=../coregitup
-		echo "git pull > $GITUP"
-		git pull > $GITUP
-		if [[ $? != 0 ]]; then
-			# do not continue so we do not build with old files
-			echo "The 'git pull' command failed.  Exiting the build."
-			exit 3
-		fi
-	fi
-	if ! $GREP 'Already up-to-date' $GITUP; then
-		SOMETHINGCHANGED=1
-	fi
-else		# using svn
-	GIT=0
-	if [ -z "$SVNUP" ]; then
-		SVNUP=../coresvnup
-		echo "svn up > $SVNUP"
-		svn up > $SVNUP
-	fi
-	if ! $GREP 'At revision' $SVNUP; then
-		SOMETHINGCHANGED=1
-	fi
-	# copy the SVNUP variable to GITUP so the rest of the script doesnt have to worry whether we did svn or git
-	GITUP=$SVNUP
+# If they have not given us a premade update file, do an svn update and capture the results
+if [ -z "$SVNUP" ]; then
+	SVNUP=../coresvnup
+	echo "svn up > $SVNUP"
+	svn up > $SVNUP
+fi
+SOMETHINGCHANGED=0
+if ! $GREP 'At revision' $SVNUP; then
+	SOMETHINGCHANGED=1
 fi
-
-setversionvars

 # Function for making the noarch rpms
 function maker {
@@ -227,7 +194,7 @@ function maker {
 }

 # If anything has changed, we should always rebuild perl-xCAT
-if [ $SOMETHINGCHANGED == 1 -o "$BUILDALL" == 1 ]; then		# Use to be:  $GREP perl-xCAT $GITUP; then
+if [ $SOMETHINGCHANGED == 1 -o "$BUILDALL" == 1 ]; then		# Use to be:  $GREP perl-xCAT $SVNUP; then
 	if [[ " $EMBEDBUILD " = *\ perl-xCAT\ * ]]; then
 		UPLOAD=1
 		maker perl-xCAT
@@ -239,12 +206,11 @@ if [ "$OSNAME" = "AIX" ]; then
 fi

 # Build the rest of the noarch rpms
-for rpmname in xCAT-client xCAT-server xCAT-IBMhpc xCAT-rmc xCAT-UI xCAT-test xCAT-buildkit xCAT-SoftLayer; do
+for rpmname in xCAT-client xCAT-server xCAT-IBMhpc xCAT-rmc xCAT-UI xCAT-test xCAT-buildkit; do
 	#if [ "$EMBED" = "zvm" -a "$rpmname" != "xCAT-server" -a "$rpmname" != "xCAT-UI" ]; then continue; fi		# for zvm embedded env only need to build server and UI
 	if [[ " $EMBEDBUILD " != *\ $rpmname\ * ]]; then continue; fi
 	if [ "$OSNAME" = "AIX" -a "$rpmname" = "xCAT-buildkit" ]; then continue; fi		# do not build xCAT-buildkit on aix
-	if [ "$OSNAME" = "AIX" -a "$rpmname" = "xCAT-SoftLayer" ]; then continue; fi		# do not build xCAT-SoftLayer on aix
-	if $GREP $rpmname $GITUP || [ "$BUILDALL" == 1 ]; then
+	if $GREP $rpmname $SVNUP || [ "$BUILDALL" == 1 ]; then
 		UPLOAD=1
 		maker $rpmname
 	fi
@@ -259,7 +225,7 @@ done
 # The mknb cmd combines them at install time.
 if [ "$OSNAME" != "AIX" ]; then
 	if [[ " $EMBEDBUILD " = *\ xCAT-genesis-scripts\ * ]]; then
-		if $GREP xCAT-genesis-scripts $GITUP || [ "$BUILDALL" == 1 ]; then
+		if $GREP xCAT-genesis-scripts $SVNUP || [ "$BUILDALL" == 1 ]; then
 			UPLOAD=1
 			ORIGFAILEDRPMS="$FAILEDRPMS"
 			./makerpm xCAT-genesis-scripts x86_64 "$EMBED"
@@ -275,19 +241,17 @@ if [ "$OSNAME" != "AIX" ]; then
 fi

 # Build the xCAT and xCATsn rpms for all platforms
-for rpmname in xCAT xCATsn xCAT-OpenStack xCAT-OpenStack-baremetal; do
+for rpmname in xCAT xCATsn; do
 	#if [ "$EMBED" = "zvm" ]; then break; fi
 	if [[ " $EMBEDBUILD " != *\ $rpmname\ * ]]; then continue; fi
-	if [ $SOMETHINGCHANGED == 1 -o "$BUILDALL" == 1 ]; then		# used to be:  if $GREP -E "^[UAD] +$rpmname/" $GITUP; then
+	if [ $SOMETHINGCHANGED == 1 -o "$BUILDALL" == 1 ]; then		# used to be:  if $GREP -E "^[UAD] +$rpmname/" $SVNUP; then
 		UPLOAD=1
 		ORIGFAILEDRPMS="$FAILEDRPMS"
 		if [ "$OSNAME" = "AIX" ]; then
-			if [ "$rpmname" = "xCAT-OpenStack" ] || [ "$rpmname" = "xCAT-OpenStack-baremetal" ]; then continue; fi 		# do not bld openstack on aix
 			./makerpm $rpmname "$EMBED"
 			if [ $? -ne 0 ]; then FAILEDRPMS="$FAILEDRPMS $rpmname"; fi
 		else
-			for arch in x86_64 ppc64 s390x; do
-				if [ "$rpmname" = "xCAT-OpenStack" -a "$arch" != "x86_64" ] || [ "$rpmname" = "xCAT-OpenStack-baremetal" -a "$arch" != "x86_64" ] ; then continue; fi 		# only bld openstack for x86_64 for now
+			for arch in x86_64 i386 ppc64 s390x; do
 				./makerpm $rpmname $arch "$EMBED"
 				if [ $? -ne 0 ]; then FAILEDRPMS="$FAILEDRPMS $rpmname-$arch"; fi
 			done
@@ -358,10 +322,10 @@ if [ "$OSNAME" != "AIX" ]; then
 		echo '%_gpg_name Jarrod Johnson' >> $MACROS
 	fi
 	echo "Signing RPMs..."
-	build-utils/rpmsign.exp `find $DESTDIR -type f -name '*.rpm'` | grep -v -E '(already contains identical signature|was already signed|rpm --quiet --resign|WARNING: standard input reopened)'
-	build-utils/rpmsign.exp $SRCDIR/*rpm | grep -v -E '(already contains identical signature|was already signed|rpm --quiet --resign|WARNING: standard input reopened)'
-	createrepo --checksum sha $DESTDIR			# specifying checksum so the repo will work on rhel5
-	createrepo --checksum sha $SRCDIR
+	build-utils/rpmsign.exp `find $DESTDIR -type f -name '*.rpm'` | grep -v -E '(was already signed|rpm --quiet --resign|WARNING: standard input reopened)'
+	build-utils/rpmsign.exp $SRCDIR/*rpm | grep -v -E '(was already signed|rpm --quiet --resign|WARNING: standard input reopened)'
+	createrepo $DESTDIR
+	createrepo $SRCDIR
 	rm -f $SRCDIR/repodata/repomd.xml.asc
 	rm -f $DESTDIR/repodata/repomd.xml.asc
 	gpg -a --detach-sign $DESTDIR/repodata/repomd.xml
@@ -374,26 +338,23 @@ if [ "$OSNAME" != "AIX" ]; then
 	fi
 fi

-# set group and permissions correctly on the built rpms
+# make everything have a group of xcat, so anyone can manage them once they get on SF
 if [ "$OSNAME" = "AIX" ]; then
+	if ! lsgroup xcat >/dev/null 2>&1; then
+		mkgroup xcat
+	fi
 	chmod +x $DESTDIR/instxcat
-fi
-chgrp -R $SYSGRP $DESTDIR
-chmod -R g+w $DESTDIR
-chgrp -R $SYSGRP $SRCDIR
-chmod -R g+w $SRCDIR
-
-else		# end of very long if-not-promote
-	# we are only promoting (not building)
-	setversionvars
-	setbranch
-	CORE="xcat-core"
-	if [ "$OSNAME" = "AIX" ]; then
-		TARNAME=core-aix-$VER.tar.gz
-	else
-		TARNAME=xcat-core-$VER.tar.bz2
+else	# linux
+	if ! $GREP xcat /etc/group; then
+		groupadd xcat
 	fi
 fi
+chgrp -R xcat $DESTDIR
+chmod -R g+w $DESTDIR
+chgrp -R xcat $SRCDIR
+chmod -R g+w $SRCDIR
+
+fi		# end of very long if-not-promote

 cd $DESTDIR

@@ -433,17 +394,14 @@ else
 	verboseflag=""
 fi
 echo "Creating $TARNAME ..."
-if [[ -e $TARNAME ]]; then
-	mkdir -p previous
-	mv -f $TARNAME previous
-fi
 if [ "$OSNAME" = "AIX" ]; then
 	tar $verboseflag -hcf ${TARNAME%.gz} $XCATCORE
+	rm -f $TARNAME
 	gzip ${TARNAME%.gz}
 else
 	tar $verboseflag -hjcf $TARNAME $XCATCORE
 fi
-chgrp $SYSGRP $TARNAME
+chgrp xcat $TARNAME
 chmod g+w $TARNAME

 # Decide whether to upload or not
@@ -498,8 +456,6 @@ if [ "$OSNAME" != "AIX" -a "$REL" = "devel" -a "$PROMOTE" != 1 -a -z "$EMBED" ];
 	rpm2cpio ../$XCATCORE/perl-xCAT-*.$NOARCH.rpm | cpio -id '*.html'
 	rpm2cpio ../$XCATCORE/xCAT-test-*.$NOARCH.rpm | cpio -id '*.html'
 	rpm2cpio ../$XCATCORE/xCAT-buildkit-*.$NOARCH.rpm | cpio -id '*.html'
-	rpm2cpio ../$XCATCORE/xCAT-OpenStack-*.x86_64.rpm | cpio -id '*.html'
-	rpm2cpio ../$XCATCORE/xCAT-SoftLayer-*.$NOARCH.rpm | cpio -id '*.html'
 	i=0
 	while [ $((i+=1)) -le 5 ] && ! rsync $verboseflag -r opt/xcat/share/doc/man1 opt/xcat/share/doc/man3 opt/xcat/share/doc/man5 opt/xcat/share/doc/man7 opt/xcat/share/doc/man8 $UPLOADUSER,xcat@web.sourceforge.net:htdocs/
 	do : ; done
@@ -97,15 +97,15 @@ if [ "$OSNAME" != "AIX" ]; then

 	# Sign the rpms that are not already signed.  The "standard input reopened" warnings are normal.
 	echo "Signing RPMs..."
-	$XCATCOREDIR/build-utils/rpmsign.exp `find . -type f -name '*.rpm'` | grep -v -E '(already contains identical signature|was already signed|rpm --quiet --resign|WARNING: standard input reopened)'
+	$XCATCOREDIR/build-utils/rpmsign.exp `find . -type f -name '*.rpm'` | grep -v -E '(was already signed|rpm --quiet --resign|WARNING: standard input reopened)'

 	# Create the repodata dirs
 	echo "Creating repodata directories..."
 	for i in `find -mindepth 2 -maxdepth 2 -type d `; do
 		if [ -n "$VERBOSEMODE" ]; then
-			createrepo --checksum sha $i            # specifying checksum so the repo will work on rhel5
+			createrepo $i
 		else
-			createrepo --checksum sha $i >/dev/null
+			createrepo $i >/dev/null
 		fi
 		rm -f $i/repodata/repomd.xml.asc
 		gpg -a --detach-sign $i/repodata/repomd.xml
@@ -149,13 +149,6 @@ cd $OSVER
 # The only interdependency between the dep rpms so far is that net-snmp requires bash, and
 # pyodbc requires unixODBC.  (The bash dependency is taken care of automatically because it
 # comes earlier in the alphabet.)
-
-# first run /usr/sbin/updtvpkg to make sure any installp software is
-# registered with RPM.
-echo "Running updtvpkg. This could take a few minutes."
-/usr/sbin/updtvpkg
-echo "updtvpkg has completed."
-
 rpm -Uvh unixODBC*
 for i in `ls *.rpm|grep -v -E '^tcl-|^tk-|^expect-|^unixODBC-|^xCAT-UI-deps|^perl-DBD-DB2Lite'`; do
 	if [ "$i" == "perl-Net-DNS-0.66-1.aix5.3.ppc.rpm" ]; then
@@ -190,13 +183,18 @@ EOF
 	chmod +x instoss
 fi

-# Get the permissions and group correct
+# Get the permissions correct.  Have to have all dirs/files with a group of xcat
+# and have them writeable by group, so any member of the xcat can build.
 if [ "$OSNAME" == "AIX" ]; then
-	SYSGRP=system
+	if ! lsgroup xcat >/dev/null 2>&1; then
+		mkgroup xcat
+	fi
 else
-	SYSGRP=root
+	if ! $GREP xcat /etc/group; then
+		groupadd xcat
+	fi
 fi
-chgrp -R $SYSGRP *
+chgrp -R xcat *
 chmod -R g+w *

 # Build the tarball
@@ -1,160 +0,0 @@
-#######################################################################
-#build script for local usage
-#used for Linux/AIX/Ubuntu
-#
-###########################################################################
-
-
-OSNAME=$(uname)
-NAMEALL=$(uname -a)
-
-for i in $*; do
-        # upper case the variable name
-        varstring=`echo "$i"|cut -d '=' -f 1|tr '[a-z]' '[A-Z]'`=`echo "$i"|cut -d '=' -f 2`
-        export $varstring
-done
-
-if [ -z "$CURDIR" ]; then
-   echo "get current directory!"
-   CURDIR=$(pwd)
-fi
-
-echo "CURDIR is $CURDIR"
-echo "OSNAME is $OSNAME!"
-echo "NAMEALL is $NAMEALL"
-
-grep -i 'SUSE' /etc/issue
-if [ $? -eq 0 ]; then
-   echo "This is a SUSE system!"
-   OS="SUSE";
-fi
-
-
-ls $CURDIR/makerpm
-
-if [ $? -gt 0 ]; then
-                echo "Error:no repo exist, exit 1."
-                exit 1 
-fi
-
-# Get a lock, so can not do 2 builds at once
-exec 8>/var/lock/xcatbld.lock
-if ! flock -n 8; then
-    echo "Can't get lock /var/lock/xcatbld.lock.  Someone else must be doing a build right now.  Exiting...."
-    exit 1
-fi
-
-#delete old package if there is
-rm -rf $CURDIR/build/
-cd $CURDIR
-
-echo "==============================================="
-echo $NAMEALL |  egrep "Ubuntu"
-
-#Check if it is an Ubuntu system
-if [ $? -eq 0 ]; then
-
-echo "This is an Ubuntu system"
-     pkg_type="snap"
-     build_string="Snap_Build"
-     cur_date=`date +%Y%m%d`
-     short_ver=`cat Version|cut -d. -f 1,2`
-     pkg_version="${short_ver}-${pkg_type}${cur_date}"
-
-     mkdir -p $CURDIR/build
-
- for rpmname in xCAT-client xCAT-genesis-scripts perl-xCAT xCAT-server xCAT xCATsn xCAT-test; do
-     rpmname_low=`echo $rpmname | tr '[A-Z]' '[a-z]'`
-     echo "============================================"
-     echo "$rpmname_low"
-     cd $rpmname
-     dch -v $pkg_version -b -c debian/changelog $build_string
-     dpkg-buildpackage -uc -us
-     rc=$?
-     if [ $rc -gt 0 ]; then
-                  echo "Error: $rpmname build package failed exit code $rc"
-     fi
-     cd -
-     mv ${rpmname_low}* $CURDIR/build
- 
- done 
-     #delete all files except  .deb file
-     find $CURDIR/build/* ! -name *.deb | xargs rm -f
-
-else
-#This is not an Ubuntu system
-echo "This is an $OSNAME system"
-
-     if [ "$OS" = "SUSE" ]; then
-         rm -rf /usr/src/packages/RPMS/noarch/*
-         rm -rf /usr/src/packages/RPMS/x86_64/*
-         rm -rf /usr/src/packages/RPMS/ppc64/*
-     else
-         rm -rf /root/rpmbuild/RPMS/noarch/*
-         rm -rf /root/rpmbuild/RPMS/x86_64/*
-         rm -rf /root/rpmbuild/RPMS/ppc64/*
-     fi
-
-     mkdir -p $CURDIR/build/
-  
-   #always build perl-xCAT
-   $CURDIR/makerpm  perl-xCAT  
- 
-
-   # Build the rest of the noarch rpms
-   for rpmname in xCAT-client xCAT-server xCAT-IBMhpc xCAT-rmc xCAT-test xCAT-buildkit; do
-        if [ "$OSNAME" = "AIX" -a "$rpmname" = "xCAT-buildkit" ]; then continue; fi     
-        $CURDIR/makerpm $rpmname
-   done
-  
-  #build xCAT-genesis-scripts if it is x86_64 platform
-  ARCH=$(uname -p)
-  if [ "$ARCH" = "x64_64" ]; then 
-       $CURDIR/makerpm xCAT-genesis-scripts x86_64  
-  fi
-
-  
-  # Build the xCAT and xCATsn rpms for all platforms
-  for rpmname in xCAT xCATsn; do
-                if [ "$OSNAME" = "AIX" ]; then
-                        $CURDIR/makerpm $rpmname
-                        if [ $? -ne 0 ]; then FAILEDRPMS="$FAILEDRPMS $rpmname"; fi 
-                else
-                        for arch in x86_64 ppc64 s390x; do
-                                $CURDIR/makerpm $rpmname $arch
-                                if [ $? -ne 0 ]; then FAILEDRPMS="$FAILEDRPMS $rpmname-$arch"; fi
-                        done
-                fi
-  done
-
-  if [ "$OS" = "SUSE" ]; then
-      cp /usr/src/packages/RPMS/noarch/* $CURDIR/build/
-      cp /usr/src/packages/RPMS/x86_64/* $CURDIR/build/
-      cp /usr/src/packages/RPMS/ppc64/* $CURDIR/build/ 
-  else
-      cp /root/rpmbuild/RPMS/noarch/* $CURDIR/build/
-      cp /root/rpmbuild/RPMS/x86_64/* $CURDIR/build/
-      cp /root/rpmbuild/RPMS/ppc64/* $CURDIR/build/
-  fi
-
-  #begin to create repo for redhat platform
-
-   grep -i 'Red' /etc/issue;
-   if [ "$OSNAME" != "AIX" -a $? -eq 0 ]; then
-        cat >$CURDIR/build/xCAT-core.repo << EOF
-[xcat-2-core]
-name=xCAT 2 Core packages
-baseurl=file://$CURDIR/build
-enabled=1
-gpgcheck=0
-EOF
-
-  cp $CURDIR/build/xCAT-core.repo /etc/yum.repos.d/
-  else
-     rm -f /etc/zypp/repos.d/xCAT-core.repo
-     zypper ar file://$CURDIR/build xCAT-core
-  fi
-   
-fi
-
-
@@ -10,6 +10,9 @@
        <packagereq type="required">xCAT-server</packagereq>
        <packagereq type="required">xCAT-client</packagereq>
        <packagereq type="required">perl-xCAT</packagereq>
+        <packagereq type="required">xCAT-nbroot-core-x86_64</packagereq>
+        <packagereq type="required">xCAT-nbroot-core-x86</packagereq>
+        <packagereq type="optional">xCAT-nbroot-core-ppc64</packagereq>
    </packagelist>
 </group>
 </comps>
@@ -32,7 +32,7 @@ function makenoarch {



-# Make one of the following rpms: xCAT, xCATsn, xCAT-buildkit, xCAT-OpenStack
+# Make one of the following rpms: xCAT, xCATsn, xCAT-buildkit
 function makexcat {
 	if [ "$OSNAME" != "AIX" -a "$1" != "xCAT-buildkit" -a -z "$2" ]; then
 		echo 'Usage: makerpm <RPMname> <arch> [<embedded-system>]'
@@ -53,7 +53,6 @@ function makexcat {
 			tar -X /tmp/xcat-excludes -cf $RPMROOT/SOURCES/templates.tar templates
 			gzip -f $RPMROOT/SOURCES/templates.tar
 			cp xcat.conf $RPMROOT/SOURCES
-			cp xcat.conf.apach24 $RPMROOT/SOURCES
 			cp xCATMN $RPMROOT/SOURCES
 		else	# xCATsn
 			tar -X /tmp/xcat-excludes -cf $RPMROOT/SOURCES/license.tar LICENSE.html
@@ -76,9 +75,7 @@ function makexcat {
 			tar --exclude .svn --exclude upflag -czf $RPMROOT/SOURCES/postscripts.tar.gz  postscripts LICENSE.html
 			tar --exclude .svn -czf $RPMROOT/SOURCES/prescripts.tar.gz  prescripts
 			tar --exclude .svn -czf $RPMROOT/SOURCES/templates.tar.gz templates
-			tar --exclude .svn -czf $RPMROOT/SOURCES/winpostscripts.tar.gz winpostscripts
 			cp xcat.conf $RPMROOT/SOURCES
-			cp xcat.conf.apach24 $RPMROOT/SOURCES
 			cp xCATMN $RPMROOT/SOURCES
 			cd - >/dev/null
 		elif [ "$RPMNAME" = "xCATsn" ]; then
@@ -91,8 +88,6 @@ function makexcat {
 			ARCH="noarch"
 			TARGET=""
 			tar --exclude .svn --exclude xCAT-buildkit.spec -czf $RPMROOT/SOURCES/$RPMNAME-$VER.tar.gz $RPMNAME
-		elif [ "$RPMNAME" = "xCAT-OpenStack" ]; then
-			tar --exclude .svn --exclude xCAT-OpenStack.spec -czf $RPMROOT/SOURCES/$RPMNAME-$VER.tar.gz $RPMNAME
 		else	# do not recognize rpm
 			echo "Unrecognized rpm: $RPMNAME"
 			exit 2
@@ -206,7 +201,7 @@ else	# linux
 fi


-if [ "$1" = "xCAT" -o "$1" = "xCATsn" -o "$1" = "xCAT-buildkit" -o "$1" = "xCAT-OpenStack" ]; then
+if [ "$1" = "xCAT" -o "$1" = "xCATsn" -o "$1" = "xCAT-buildkit" ]; then
 	exportEmbed $3
 	makexcat $1 $2
 elif [ "$1" = "xCAT-nbroot" -o "$1" = "xCAT-nbroot-core" ]; then
@@ -262,12 +262,6 @@ expression B<($1-1)%14+1> will evaluate to B<6>.

 See http://www.perl.com/doc/manual/html/pod/perlre.html for information on perl regular expressions.

-=head2 Easy Regular Expressions 
-
-As of xCAT 2.8.1, you can use a modified version of the regular expression support described in the previous section. You do not need to enter the node information (1st part of the expression), it will be derived from the input nodename. You only need to supply the 2nd part of the expression to determine the value to give the attribute. For examples, see 
-
-https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Listing_and_Modifying_the_Database#Easy_Regular_expressions
-
 =head1 OBJECT DEFINITIONS

 Because it can get confusing what attributes need to go in what tables, the xCAT database can also
@@ -1,7 +1,7 @@
 Source: perl-xcat
 Section: libs
 Priority: extra
-Maintainer: xCAT <xcat-user@lists.sourceforge.net>
+Maintainer: Arif Ali <aali@ocf.co.uk>
 Build-Depends: debhelper (>= 5), libsoap-lite-perl, libdbi-perl
 Standards-Version: 3.7.2

@@ -14,6 +14,7 @@ export DH_COMPAT=5

 build:
 	dh_testdir
+	./modifyUtils `cat ../Version` `svn info | grep Revision | cut -d" " -f 2`
 	./db2man

 clean:
@@ -48,7 +49,6 @@ binary-arch: build install
 	chmod 644 `pwd`/debian/perl-xcat/opt/xcat/share/doc/man5/*
 	chmod 644 `pwd`/debian/perl-xcat/opt/xcat/share/man/man7/*
 	chmod 644 `pwd`/debian/perl-xcat/opt/xcat/share/doc/man7/*
-	./modifyUtils `cat ../Version` `svn info | grep Revision | cut -d" " -f 2`
 #	dh_installmenu
 #	dh_installdebconf	
 #	dh_installlogrotate
@@ -3,25 +3,32 @@

 if [ -z "$2" ]
 	then
-	echo "modifyUtils:  Error:  must specify the xCAT version as an argument" >&2
+	echo "modifyUtils:  Error:  must specify the xCAT version and svn revision number as arguments" >&2
 	exit
 fi

 VER=$1
-GITREF="git commit $2, "
+SVNREF="svn r$2, "
+
+#SVNINFO=`svn info 2>/dev/null|grep Revision`
+#/bin/echo -e $SVNINFO
+#if [ $? -ne 0 -a -f .svninfo ]; then
+#    SVNINFO=`cat .svninfo 2>/dev/null|grep Revision`
+#fi
+#if [ $? -eq 0 ]
+#	then
+#		SVNREF="svn r"`echo $SVNINFO|awk '{print $2}'`", "
+#	else
+#		SVNREF=""
+#	fi

 BUILDDATE=`date`
-#echo ". '(built $BUILDDATE)'"
+#echo ". '(${SVNREF}built $BUILDDATE)'"

 if [ "$(uname)" = "AIX" ]
 then
-	sed -e s/"#XCATVERSIONSUBHERE"/". '$VER'"/ -e s/"#XCATSVNBUILDSUBHERE"/". ' (${GITREF}built $BUILDDATE)'"/ xCAT/Version.pm >xCAT/Version.pm.new
+	sed -e s/"#XCATVERSIONSUBHERE"/". '$VER'"/ -e s/"#XCATSVNBUILDSUBHERE"/". ' (${SVNREF}built $BUILDDATE)'"/ xCAT/Version.pm >xCAT/Version.pm.new
 	mv xCAT/Version.pm.new xCAT/Version.pm
 else
-        if [ -f "/etc/debian_version" ];then
-            FILENAME="debian/perl-xcat/opt/xcat/lib/perl/xCAT/Version.pm"
-        else
-            FILENAME="xCAT/Version.pm"
-        fi
-	sed -i -e s/"#XCATVERSIONSUBHERE"/". '$VER'"/ -e s/"#XCATSVNBUILDSUBHERE"/". ' (${GITREF}built $BUILDDATE)'"/ $FILENAME
+	sed -i -e s/"#XCATVERSIONSUBHERE"/". '$VER'"/ -e s/"#XCATSVNBUILDSUBHERE"/". ' (${SVNREF}built $BUILDDATE)'"/ xCAT/Version.pm
 fi
@@ -23,10 +23,9 @@ Provides: perl-xCAT = %{epoch}:%{version}
 Provides perl xCAT libraries for core functionality.  Required for all xCAT installations.
 Includes xCAT::Table, xCAT::NodeRange, among others.

-%define gitinfo %(git log -n 1 | head -n 1 | cut -f 2 -d ' ')
-
 %define zvm %(if [ "$zvm" = "1" ];then echo 1; else echo 0; fi)
 %define fsm %(if [ "$fsm" = "1" ];then echo 1; else echo 0; fi)
+%define svninfo %(svn info | grep Revision | awk '{print $2}')

 %prep
 %setup -q -n perl-xCAT
@@ -38,7 +37,7 @@ Includes xCAT::Table, xCAT::NodeRange, among others.
 %if %fsm
 %else
 # Modify the Version() function in xCAT/Utils.pm to automatically have the correct version
-./modifyUtils %{version} %{gitinfo}
+./modifyUtils %{version} %{svninfo}

 # Build the pod version of the man pages for each DB table.  It puts them in the man5 and man7 subdirs.
 # Then convert the pods to man pages and html pages.
@@ -191,12 +191,7 @@ sub updateUserInfo {
        {
            for my $record (@diff)
            {
-                # skip to add ROOT relative records into MERGE file
-                if ($record =~ /^root/)
-                {
-                    next;
-                }
-                print $fp "$record\n";
+               print $fp "$record\n";
            }
        }
        close ($fp);
@@ -235,13 +230,24 @@ sub setCFMSynclistFile {
    # get the cfmdir and synclists attributes
    my $osimage_t = xCAT::Table->new('osimage');
    my $records = $osimage_t->getAttribs({imagename=>$img}, 'cfmdir', 'synclists');
-    if (defined ($records->{'cfmdir'}))
+    if ($records)
    {
-        $cfmdir = $records->{'cfmdir'};
-        if (defined ($records->{'synclists'})) {$synclists = $records->{'synclists'}}
+        if ($records->{'cfmdir'}) {$cfmdir = $records->{'cfmdir'}}
+        if ($records->{'synclists'}) {$synclists = $records->{'synclists'}}
    } else {
-        # no cfmdir defined, return directly
-        return 0;
+        if ($::VERBOSE)
+        {
+            my $rsp = {};
+            $rsp->{data}->[0] = "There are no records for cfmdir and synclists attribute in the osimage:$img. There is nothing to process.";
+            xCAT::MsgUtils->message("I", $rsp, $::CALLBACK);
+        }
+        return;
+    }
+
+    # no cfmdir defined, return directly
+    if (!$cfmdir)
+    {
+        return;
    }

    my $found = 0;
@@ -363,8 +369,7 @@ sub updateCFMSynclistFile {

            # recursively list the files under cfm directory 
            my @files = ();
-
-            find ( { wanted => sub { push @files, $File::Find::name if -f }, follow => 1 }, $cfmdir);
+            find ( sub { push @files, $File::Find::name if (! -d) }, $cfmdir);
            if (!@files) # not files under cfm directory, skip to next loop 
            {
                next;
@@ -179,28 +179,11 @@ if (ref($request) eq 'HASH') { # the request is an array, not pure XML
  if ($ENV{XCATHOST}) {
    $xcathost=$ENV{XCATHOST};
  }
-  my %connargs=();
-  if ($xcathost =~ s/%([^\]|:]*)//) {
-      $connargs{PeerScope} = $1;
-  }
-  $connargs{PeerAddr} = $xcathost;
-  $connargs{Timeout} = 15;
-  if ($connargs{PeerScope} and $connargs{PeerScope} =~ /[a-zA-Z]/) { #non-numeric, need to translate...
-	my @ipdata = `ip link`;
-	@ipdata = grep(/[^@]$connargs{PeerScope}(:|@)/,@ipdata);
-	if (scalar(@ipdata) != 1) {
-		print STDERR "Unable to identify scope ".$connargs{PeerScope}."\n";
-		exit(1);
-	}
-	$connargs{PeerScope} = $ipdata[0];
-	$connargs{PeerScope} =~ s/:.*//;
-   }
-		
-	
  my $pclient;
  if ($inet6support) {
     $pclient = IO::Socket::INET6->new(
-	%connargs,
+    PeerAddr => $xcathost,
+    Timeout => 15,
    );
  } else {
     $pclient = IO::Socket::INET->new(
@@ -223,7 +206,6 @@ if (ref($request) eq 'HASH') { # the request is an array, not pure XML
    SSL_key_file => $keyfile,
    SSL_cert_file => $certfile,
    SSL_ca_file => $cafile,
-    SSL_verify_mode => SSL_VERIFY_PEER,
    SSL_use_cert => 1,
    Timeout => 0,
   );
@@ -232,16 +214,6 @@ if (ref($request) eq 'HASH') { # the request is an array, not pure XML
 		 Timeout => 0,
 		);
  }
-  unless ($client) {
-     print "Unable to open socket connection to xcatd daemon on $xcathost.\n";
-     print "Verify that the xcatd daemon is running and that your SSL setup is correct.\n";
-     if ($@ =~ /SSL Timeout/) {
-        die "Connection failure: SSL Timeout or incorrect certificates in ~/.xcat";
-     } else {
-        die "Connection failure: $@"
-     }
-  }
-
  my $msg;
  if (ref($request) eq 'HASH') { # the request is an array, not pure XML
    $msg=XMLout($request,RootName=>'xcatrequest',NoAttr=>1,KeyAttr=>[]);
@@ -313,7 +285,6 @@ if (ref($request) eq 'HASH') { # the request is an array, not pure XML
  $massresponse="";
  unless ($cleanexit) {
     print STDERR "ERROR/WARNING: communication with the xCAT server seems to have been ended prematurely\n";
-     $xCAT::Client::EXITCODE = 1;
  }

 sub validateXML {
@@ -626,10 +597,7 @@ sub plugin_command {
        no strict  "refs";
 #       eval { #REMOVEEVALFORDEBUG
 #       if ($dispatch_requests) {
-        # backup the original req and recover it after the a run
-        my $org_req = {%$req};
-        dispatch_request($req,$callback,$modname);
-        $req = {%$org_req};
+                dispatch_request($req,$callback,$modname);
 #       } else {
 #          $SIG{CHLD}='DEFAULT';
 #          ${"xCAT_plugin::".$modname."::"}{process_request}->($req,$callback,\&do_request);
@@ -57,7 +57,7 @@ sub getObjectsOfType

    # The database may be changed between getObjectsOfType calls
    # do not use cache %::saveObjList  if --nocache is specified
-    if ($::saveObjList{$type} && !$::opt_nc)
+    if ($::saveObjList{$type} && !$::opt_c)
    {
        @objlist = @{$::saveObjList{$type}};
    }
@@ -200,8 +200,7 @@ sub getobjattrs
            # list of object names
            foreach my $table (keys %tableattrs) {
                # open the table
-                # with autocommit => 0, it does not work on Ubuntu running mysql
-                my $thistable = xCAT::Table->new($table, -create => 1, -autocommit => 1);
+                my $thistable = xCAT::Table->new($table, -create => 1, -autocommit => 0);
                if (!$thistable) {
                    my $rsp;
                    $rsp->{data}->[0] = "Could not open the \'$table\' table.";
@@ -607,7 +606,7 @@ sub getDBtable

 	# save this table info - in case this subr gets called multiple times
    # --nocache flag specifies not to use cahe
-    if (grep(/^$table$/, @::foundTableList) && !$::opt_nc)
+    if (grep(/^$table$/, @::foundTableList) && !$::opt_c)
    {

        # already have this
@@ -618,7 +617,7 @@ sub getDBtable
    {

    	# need to get info from DB
-    	my $thistable = xCAT::Table->new($table, -create => 1);
+    	my $thistable = xCAT::Table->new($table, -create => 1, -autocommit => 0);
    	if (!$thistable)
    	{
        	return undef;
@@ -1680,14 +1679,7 @@ sub readFileInput

            $look_for_colon = 0;    # ok - we have a colon

-            # Remove any trailing whitespace
-            $l =~ s/\s*$//;
-
-            # IPv6 network names could be something like fd59::/64
-            # Use all the characters before the last ":" as the object name
-            # .* means greedy regular expression
-            $l =~ /^(.*):(.*?)$/;
-            ($objectname, $junk2) = ($1, $2);
+            ($objectname, $junk2) = split(/:/, $l);

            # if $junk2 is defined or there's an = 
            if ($junk2 || grep(/=/, $objectname))
@@ -2007,14 +1999,7 @@ sub getNetwkInfo
                                        my @nodes = ("$node");
                                        my $sn = xCAT::ServiceNodeUtils->get_ServiceNode(\@nodes,"xcat","Node");
                                        my $snkey = (keys %{$sn})[0];
-                                        my $gw = xCAT::NetworkUtils->getipaddr($snkey);
-                                        # two possible cases when this code is run:
-                                        # 1. flat cluster: ip forwarding is not enabled on MN
-                                        # 2. hw ctrl in hierarchy cluster, in which HCP SN is not set
-                                        # in either case, MN itself should not be the gateway
-                                         if (xCAT::NetworkUtils->thishostisnot($gw)) {
-                                             $nethash{$node}{'gateway'} = $gw;
-                                         }
+                                        $nethash{$node}{'gateway'} = xCAT::NetworkUtils->getipaddr($snkey);
                                    }
                                
                                }
@@ -2747,7 +2732,7 @@ sub collapsenicsattr()
        # e.g nicips.eth0
        # do not need to handle nic attributes without the postfix .ethx,
        # it will be overwritten by the attributes with the postfix .ethx,
-        if ($nodeattr =~ /^(nic\w+)\.(.*)$/)
+        if ($nodeattr =~ /^(nic\w+)\.(\w+)$/)
        {       
           if ($1 && $2)
           {       
@@ -598,7 +598,7 @@ sub _execute_dsh
                }
                else
                {
-                    # HERE: This is where the output shows up
+                    # LKV: This is where the output shows up
                    #print STDOUT @{$output_buffers{$user_target}};
                    #print STDERR @{$error_buffers{$user_target}};
                    chomp(@{$output_buffers{$user_target}});
@@ -1019,19 +1019,11 @@ sub fork_fanout_dsh
            }
        }
    }
-    # save the original exports,  we are going to add the unique node name below
-    my $firstpass=0;
+
    while (@$targets_waiting
           && (keys(%$targets_active) < $$options{'fanout'}))
    {
        my $user_target       = shift @$targets_waiting;
-        # now add export NODE=nodename to the pre-command, if not a device;
-        my $exportnode;
-        if (($$options{'devicetype'})) {
-            $exportnode="";
-        } else{
-         $exportnode="export NODE=$user_target; ";
-        }
        my $target_properties = $$resolved_targets{$user_target};
        my @commands;
        my $localShell        =
@@ -1045,9 +1037,9 @@ sub fork_fanout_dsh
            $$options{'post-command'} = "";
            $dsh_cmd_background = 1;
        }
+
        if ($$options{'environment'})
        {
-          if ($firstpass ==0) {   # do the servicenode stuff only once
            # if we are on a servicenode need to get the environment file
            # from the SNsyncfiledir, not local
            if (xCAT::Utils->isServiceNode()) {
@@ -1070,17 +1062,14 @@ sub fork_fanout_dsh
               $rsp->{error}->[0] = "File $$options{'environment'} does not exist";
               xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
            }
-            $firstpass=1;
-           }
-           # build the xdsh command
-           push @dsh_command,
-              "$exportnode$$options{'pre-command'} . $$options{'environment'} ; $$options{'command'}$$options{'post-command'}";
+            push @dsh_command,
+              "$$options{'pre-command'} . $$options{'environment'} ; $$options{'command'}$$options{'post-command'}";
        }

        else
        {
            push @dsh_command,
-              "$exportnode$$options{'pre-command'}$$options{'command'}$$options{'post-command'}";
+              "$$options{'pre-command'}$$options{'command'}$$options{'post-command'}";
        }

        if ($$target_properties{'localhost'})
@@ -1148,7 +1137,7 @@ sub fork_fanout_dsh
            #eval "require RemoteShell::$rsh_extension";
            eval "require xCAT::$rsh_extension";

-            $rsh_config{'command'} = "$exportnode$$options{'pre-command'}";
+            $rsh_config{'command'} = "$$options{'pre-command'}";
            my $tmp_env_file;
            # for the -E flag here we build and copy the -E env variable
            # file to the nodes
@@ -2349,14 +2338,10 @@ sub config_dsh
 	    }
 	}
 	else
-
 	{
-          # if not Mellanox, it does not need a config file
-          if (!($$options{'devicetype'}  =~ /Mellanox/i)) {
            my $rsp = {};
-            $rsp->{error}->[0] = "The config file: $devicepath is missing";
-             xCAT::MsgUtils->message('E', $rsp, $::CALLBACK);
-          }
+            $rsp->{error}->[0] = "EMsgMISSING_DEV_CFG";
+            xCAT::MsgUtils->message('E', $rsp, $::CALLBACK);
 	}
    }

@@ -3241,17 +3226,7 @@ sub bld_resolve_nodes_hash

    # find out if we have an MN in the list, local cp and sh will be used
    # not remote shell
-    # find out the names for the Management Node
-    my @MNnodeinfo   = xCAT::NetworkUtils->determinehostname;
-    my $mname   = pop @MNnodeinfo;                  # hostname
-    my $cmd="hostname";
-    my $localhostname = xCAT::Utils->runcmd($cmd,0);
-    if ($::RUNCMD_RC != 0)
-    {
-       my $rsp = {};
-       $rsp->{info}->[0] = "Command: $cmd failed. Continuing...";
-       xCAT::MsgUtils->message("I", $rsp, $::CALLBACK);
-    } 
+    my $mname = xCAT::Utils->noderangecontainsMn(@target_list);
    foreach my $target (@target_list)
    {

@@ -3260,9 +3235,11 @@ sub bld_resolve_nodes_hash
        my $localhost;
        my $user;
        my $context = "XCAT";
-        # check to see if this node is the Management Node we are on,  can run local commands (sh,cp)
-        if (($mname eq $target) || ($localhostname eq $target)){
+        # check to see if this node is the Management Node
+        if ($mname) {
+          if ($mname eq $target) {
            $localhost=$target;
+          }
        }
        my %properties = (
                          'hostname'   => $hostname,
@@ -3997,7 +3974,8 @@ sub parse_and_run_dsh
    {
        $options{'user'} = $ENV{'DSH_TO_USERID'};
    }
-    if ((!(defined($nodes))) && (!(defined($options{'rootimg'}))))
+
+    if ((!(defined(@$nodes))) && (!(defined($options{'rootimg'}))))
    {    #  no nodes and not -i option, error
        my $rsp = ();
        $rsp->{error}->[0] = "Unless using -i option,  noderange is required.";
@@ -4036,7 +4014,7 @@ sub parse_and_run_dsh
        {    # from sinv, discard this name
            undef @$nodes;
        }
-        if (@$nodes)
+        if (defined(@$nodes))
        {
            my $rsp = {};
            $rsp->{error}->[0] =
@@ -4090,12 +4068,11 @@ sub parse_and_run_dsh
        # check if any node in the noderange is the Management Node and exit 
        # with error, if the Management Node is in the Database and in the
        # noderange
-        my @mname = xCAT::Utils->noderangecontainsMn(@nodelist); 
-        if (@mname) {  # MN in the nodelist
-            my $nodes=join(',', @mname);
+        my $mname = xCAT::Utils->noderangecontainsMn(@nodelist); 
+        if ($mname) {  # MN in the nodelist
            my $rsp = {};
            $rsp->{error}->[0] =
-              "You must not run -K option against the Management Node:$nodes.";
+              "You must not run -K option against the Management Node:$mname.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
            return;
        } 
@@ -4197,7 +4174,7 @@ sub parse_and_run_dsh
        #
        # setup ssh keys on the nodes or ib switch
        #
-        my $rc      = xCAT::TableUtils->setupSSH($options{'nodes'},$options{'timeout'});
+        my $rc      = xCAT::TableUtils->setupSSH($options{'nodes'});
        my @results = "return code = $rc";
        return (@results);
    }
@@ -4408,7 +4385,7 @@ sub parse_and_run_dcp
            return;
        }
    }
-    if ((!(defined($nodes))) && (!(defined($options{'rootimg'}))))
+    if ((!(defined(@$nodes))) && (!(defined($options{'rootimg'}))))
    {    #  no nodes and not -i option, error
        my $rsp = {};
        $rsp->{error}->[0] = "Unless using -i option,  noderange is required.";
@@ -4505,7 +4482,7 @@ sub parse_and_run_dcp
    #
    # build list of nodes
    my @nodelist;
-    if (@$nodes)
+    if (defined(@$nodes))
    {    # there are nodes
        @nodelist = @$nodes;
        $options{'nodes'} = join(',', @nodelist);
@@ -4709,42 +4686,21 @@ sub parse_and_run_dcp
    my $ranpostscripts;
    my $ranappendscripts;
    my $ranmergescripts;
-
-    # if we were called with runxcmd, like by updatenode
-    # need to save the runxcmd buffer 
-    # $::xcmd_outref
-    my $save_xcmd_outref;
-    if ($::xcmd_outref) { # this means we were called with runxcmd
-     $save_xcmd_outref = $::xcmd_outref;
-    }
-
    if ((@::postscripts) && ($::SYNCSN == 0)) {
-       @results2 = &run_rsync_postscripts(\@results,$synfiledir,\%options); 
+       @results2 = &run_rsync_postscripts(\@results,$synfiledir); 
       $ranpostscripts=1;
    }
    if ((@::alwayspostscripts) && ($::SYNCSN == 0)) {
-       @results3 = &run_always_rsync_postscripts(\@nodelist,$synfiledir,\%options); 
+       @results3 = &run_always_rsync_postscripts(\@nodelist,$synfiledir); 
    }
    if (($::appendscript) && ($::SYNCSN == 0)) {
-       @results4 = &bld_and_run_append(\@nodelist,\@results,$synfiledir,$nodesyncfiledir,\%options); 
+       @results4 = &bld_and_run_append(\@nodelist,\@results,$synfiledir,$nodesyncfiledir); 
       $ranappendscripts=1;
    }
    if (($::mergescript) && ($::SYNCSN == 0)) {
-       @results5 = &bld_and_run_merge(\@nodelist,\@results,$synfiledir,$nodesyncfiledir,\%options); 
+       @results5 = &bld_and_run_merge(\@nodelist,\@results,$synfiledir,$nodesyncfiledir); 
       $ranmergescripts=1;
    }
-    # restore the runxcmd buffer
-    if ($save_xcmd_outref) { # this means we were called with runxcmd
-     $::xcmd_outref = $save_xcmd_outref;
-    }
-    # TODO, will we ever need to merge
-    # if we ran a postscript and we were run
-    # using runxcmd, and there was previous output in the 
-    # runxcmd buffer and we have output from the postscript
-    # then we have to merge the outputs
-    #if (($ranaps == 1) && ($save_xcmd_outref) && ($::xcmd_outref) ) {
-    #  &mergeoutput($save_xcmd_outref);
-    #}
    my @newresults;
    if (@results2) {
      @newresults = (@results2);
@@ -4759,14 +4715,9 @@ sub parse_and_run_dcp
      @newresults = (@newresults,@results3,@results4,@results5);
    }
    if (@newresults) {
-      if ($save_xcmd_outref) { # this means we were called with runxcmd
-        foreach my $line (@newresults) {
-         push @$::xcmd_outref,$line;
-        }
-      }
      return (@newresults);
    } else {
-      # don't report other results for postscripts,appendscripts,mergescripts because
+      # don't report results for postscripts,appendscripts,mergescripts because
      # you get all the rsync returned lines
      if (($ranpostscripts == 0 ) && ($ranappendscripts == 0) 
         && ($ranmergescripts == 0)) { 
@@ -4975,8 +4926,7 @@ sub parse_rsync_input_file_on_MN
    $::process_line = 0;
    my $destfileisdir;
    my $clause=0;
-    my $addmergescript =0;
-    my $addappendscript =0;
+    
    open(INPUTFILE, "< $input_file") || die "File $input_file does not exist\n";
    while (my $line = <INPUTFILE>)
    {
@@ -5017,16 +4967,12 @@ sub parse_rsync_input_file_on_MN
                  # this triggers the running of the appendscript
                  $::appendscript ="/opt/xcat/share/xcat/scripts/xdcpappend.sh";
                }
-
                # add the append script to the sync
-                if ($addappendscript == 0) {  # only add once
-                  my  $appscript ="/opt/xcat/share/xcat/scripts/xdcpappend.sh";
-                  my $appendscriptline = "$appscript -> $appscript"; 
-                  $syncappendscript=1;  # syncing the xdcpappend.sh script
-                   &build_append_rsync($appendscriptline,$nodes, $options, $input_file,$rsyncSN, $syncdir,$nodesyncfiledir,$onServiceNode,$syncappendscript);
-                   $addappendscript=1;
-                 } 
-               }  # end APPEND clause
+                my  $appscript ="/opt/xcat/share/xcat/scripts/xdcpappend.sh";
+                my $appendscriptline = "$appscript -> $appscript"; 
+                $syncappendscript=1;  # syncing the xdcpappend.sh script
+                 &build_append_rsync($appendscriptline,$nodes, $options, $input_file,$rsyncSN, $syncdir,$nodesyncfiledir,$onServiceNode,$syncappendscript);
+               }
               if ($clause =~ /MERGE:/) {
                 # location of the base merge script
                 # for MERGE we have to sync the mergescript and the
@@ -5038,16 +4984,12 @@ sub parse_rsync_input_file_on_MN
                  # this triggers the running of the mergescript
                  $::mergescript ="/opt/xcat/share/xcat/scripts/xdcpmerge.sh";
                }
-                
                # add the merge script to the sync
-                if ($addmergescript == 0) {  # only add once
-                  my  $mergescript ="/opt/xcat/share/xcat/scripts/xdcpmerge.sh";
-                  my $mergescriptline = "$mergescript -> $mergescript"; 
-                  $syncmergescript=1;  # syncing the xdcpmerge.sh script
-                  &build_merge_rsync($mergescriptline,$nodes, $options, $input_file,$rsyncSN, $syncdir,$nodesyncfiledir,$onServiceNode,$syncmergescript);
-                  $addmergescript=1;
-                }
-               }  # end MERGE clause
+                my  $mergescript ="/opt/xcat/share/xcat/scripts/xdcpmerge.sh";
+                my $mergescriptline = "$mergescript -> $mergescript"; 
+                $syncmergescript=1;  # syncing the xdcpmerge.sh script
+                 &build_merge_rsync($mergescriptline,$nodes, $options, $input_file,$rsyncSN, $syncdir,$nodesyncfiledir,$onServiceNode,$syncmergescript);
+               }
           
           }
         } else {  # not processing EXECUTE, EXECUTEALWAYS or APPEND
@@ -5211,7 +5153,6 @@ sub build_append_rsync
              push @::appendlines,$line;
            }
            my $src_file  = $1; # append file left of arror
-            my $orig_src_file  = $1; # append file left of arror
            # it will be sync'd to $nodesyncfiledir/$append_file
            my $dest_file = $nodesyncfiledir;
            $dest_file .= $src_file;  
@@ -5240,7 +5181,7 @@ sub build_append_rsync
                    # to pick up files from /var/xcat/syncfiles...
                    if ($onServiceNode == 1) {
                      my $newsrcfile = $syncdir;    # add SN syndir on front
-                      $newsrcfile .= $orig_src_file;
+                      $newsrcfile .= $src_file;
                      $src_file=$newsrcfile;
                    }
                    # destination file name
@@ -5323,8 +5264,7 @@ sub build_merge_rsync
            if ($syncmergescript == 0) { # don't add the xdcpmerge.sh line 
              push @::mergelines,$line;
            }
-            my $src_file  = $1; # merge file left of arrow
-            my $orig_src_file = $1;
+            my $src_file  = $1; # merge file left of arror
            # it will be sync'd to $nodesyncfiledir/$merge_file
            my $dest_file = $nodesyncfiledir;
            $dest_file .= $src_file;  
@@ -5353,7 +5293,7 @@ sub build_merge_rsync
                    # to pick up files from /var/xcat/syncfiles...
                    if ($onServiceNode == 1) {
                      my $newsrcfile = $syncdir;    # add SN syndir on front
-                      $newsrcfile .= $orig_src_file; 
+                      $newsrcfile .= $src_file;
                      $src_file=$newsrcfile;
                    }
                    # destination file name
@@ -5652,7 +5592,7 @@ sub parse_rsync_input_file_on_SN

 sub run_rsync_postscripts 
 {
-    my ($rsyncoutput,$syncdir,$options) = @_;
+    my ($rsyncoutput,$syncdir) = @_;
    my @rsync_output   = @$rsyncoutput;
    my @newoutput= (); 
    my $dshparms; 
@@ -5695,26 +5635,27 @@ sub run_rsync_postscripts
    # now if we have postscripts to run, run xdsh
    my $out;

+    # if we were called with runxcmd, like by updatenode
+    # need to save the runxcmd buffer 
+    # $::xcmd_outref
+    my $save_xcmd_outref;
+    if ($::xcmd_outref) { # this means we were called with runxcmd
+     $save_xcmd_outref = $::xcmd_outref;
+    }
    # my $ranaps=0;   # did we run a postscript

    foreach  my $ps ( keys %{$$dshparms{'postscripts'}}) {
        my @nodes;
        push (@nodes, @{$$dshparms{'postscripts'}{$ps}}); 
-        my @args=();
-        if ($$options{'nodestatus'}) {
-          push @args,"--nodestatus" ;
-        }
-        push @args,"-e";
        # if on the service node need to add the $syncdir directory 
        # to the path
        if (xCAT::Utils->isServiceNode()) {
         my $tmpp=$syncdir . $ps;
         $ps=$tmpp;
        }
-        push @args,$ps;
-        $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
+         $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
                                    node    => \@nodes,
-                                    arg     => \@args, 
+                                    arg     => [ "-e", $ps ]
                             }, $::SUBREQ, 0,1);
        foreach my $r (@$out){
                push(@newoutput, $r);
@@ -5722,6 +5663,18 @@ sub run_rsync_postscripts
        }
        #     $ranaps=1;
    }
+    # restore the runxcmd buffer
+    if ($save_xcmd_outref) { # this means we were called with runxcmd
+     $::xcmd_outref = $save_xcmd_outref;
+    }
+    # TODO, will we ever need to merge
+    # if we ran a postscript and we were run
+    # using runxcmd, and there was previous output in the 
+    # runxcmd buffer and we have output from the postscript
+    # then we have to merge the outputs
+    #if (($ranaps == 1) && ($save_xcmd_outref) && ($::xcmd_outref) ) {
+    #  &mergeoutput($save_xcmd_outref);
+    #}
    return @newoutput;
 }
 #-------------------------------------------------------------------------------
@@ -5759,7 +5712,7 @@ sub run_rsync_postscripts

 sub bld_and_run_append
 {
-    my ($hostnames,$rsyncoutput,$syncdir,$nodesyncfiledir,$options) = @_;
+    my ($hostnames,$rsyncoutput,$syncdir,$nodesyncfiledir) = @_;
    my @hosts   = @$hostnames;
    my @rsync_output   = @$rsyncoutput;
    my @newoutput= (); 
@@ -5809,10 +5762,8 @@ sub bld_and_run_append
            # that were rsyn'd to at least one node
            if ($tmpappendfile eq $ps) { 
               my $parm="$appendfile:$filetoappend ";
-               # check to see if the parameter is already in the list
-               if (!($::xdcpappendparms =~ /$parm/)) {
-                  $::xdcpappendparms .= $parm;
-               }
+
+               $::xdcpappendparms .= $parm;
               $processappend=1;

            }
@@ -5833,16 +5784,10 @@ sub bld_and_run_append
       foreach  my $ps ( keys %{$$dshparms{'appendscripts'}}) {
         my @nodes;
         push (@nodes, @{$$dshparms{'appendscripts'}{$ps}}); 
-         my @args=();
-         if ($$options{'nodestatus'}) {
-           push @args,"--nodestatus" ;
-         }
-         push @args,$ps;
-         push @args,$::xdcpappendparms;
         
         $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
                                    node    => \@nodes,
-                                    arg     => \@args, 
+                                    arg     => [ $ps , $::xdcpappendparms ]
                             }, $::SUBREQ, 0,1);
         foreach my $r (@$out){
                push(@newoutput, $r);
@@ -5889,7 +5834,7 @@ sub bld_and_run_append

 sub bld_and_run_merge
 {
-    my ($hostnames,$rsyncoutput,$syncdir,$nodesyncfiledir,$options) = @_;
+    my ($hostnames,$rsyncoutput,$syncdir,$nodesyncfiledir) = @_;
    my @hosts   = @$hostnames;
    my @rsync_output   = @$rsyncoutput;
    my @newoutput= (); 
@@ -5948,10 +5893,8 @@ sub bld_and_run_merge
            # that were rsyn'd to at least one node
            if ($tmpmergefile eq $ps) { 
               my $parm="$mergefile:$filetomerge ";
-               # check to see if the parameter is already in the list
-               if (!($::xdcpmergeparms =~ /$parm/)) {
-                 $::xdcpmergeparms .= $parm;
-               }
+
+               $::xdcpmergeparms .= $parm;
               $processmerge=1;

            }
@@ -5973,17 +5916,9 @@ sub bld_and_run_merge
         my @nodes;
         push (@nodes, @{$$dshparms{'mergescripts'}{$ps}}); 
         
-         # build the argument list
-         my @args=();
-   
-         if ($$options{'nodestatus'}) {
-            push @args,"--nodestatus" ;
-         }
-         push @args, $ps;
-         push @args, $::xdcpmergeparms;
         $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
                                    node    => \@nodes,
-                                    arg     => \@args, 
+                                    arg     => [ $ps , $::xdcpmergeparms ]
                             }, $::SUBREQ, 0,1);
         foreach my $r (@$out){
                push(@newoutput, $r);
@@ -6009,7 +5944,7 @@ sub bld_and_run_merge

 sub run_always_rsync_postscripts 
 {
-    my ($hostnames,$syncdir,$options) = @_;
+    my ($hostnames,$syncdir) = @_;
    my @hosts   = @$hostnames;
    my @newoutput= (); 
    my $dshparms; 
@@ -6031,28 +5966,26 @@ sub run_always_rsync_postscripts
    # now if we have postscripts to run, run xdsh
    my $out;

-
+    # if we were called with runxcmd, like by updatenode
+    # need to save the runxcmd buffer 
+    # $::xcmd_outref
+    my $save_xcmd_outref;
+    if ($::xcmd_outref) { # this means we were called with runxcmd
+     $save_xcmd_outref = $::xcmd_outref;
+    }
    foreach  my $ps ( keys %{$$dshparms{'postscripts'}}) {
        my @nodes;
-        # build the argument list
-        my @args=();
-        if ($$options{'nodestatus'}) {
-          push @args,"--nodestatus" ;
-        }
-        push @args,"-e";
+        push (@nodes, @{$$dshparms{'postscripts'}{$ps}}); 
        # if on the service node need to add the $syncdir directory 
        # to the path
        if (xCAT::Utils->isServiceNode()) {
-         my $tmps=$syncdir . $ps;
-         push @args, $tmps;
-        } else{
-          push @args, $ps;
+         my $tmpp=$syncdir . $ps;
+         $ps=$tmpp;
        }
-        push (@nodes, @{$$dshparms{'postscripts'}{$ps}}); 
         
-        $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
+         $out=xCAT::Utils->runxcmd( { command => ['xdsh'],
                                    node    => \@nodes,
-                                    arg     => \@args, 
+                                    arg     => [ "-e", $ps ]
                             }, $::SUBREQ, 0,1);
        foreach my $r (@$out){
                push(@newoutput, $r);
@@ -6060,6 +5993,10 @@ sub run_always_rsync_postscripts
        }


+    }
+    # restore the runxcmd buffer
+    if ($save_xcmd_outref) { # this means we were called with runxcmd
+     $::xcmd_outref = $save_xcmd_outref;
    }
    return @newoutput;
 }
@@ -253,6 +253,64 @@ use strict;



+#---------------------------------------------------------------------------
+
+=head3
+        ifconfig_inet
+
+        Builds a list of all IP Addresses bound to the local host and
+        stores them in a global list
+
+        Arguments:
+        	None
+
+        Returns:
+        	None
+                
+        Globals:
+        	@local_inet
+    
+        Error:
+        	None
+    
+        Example:
+        	xCAT::DSHCore->ifconfig_inet;
+
+        Comments:
+        	Internal routine only
+
+=cut
+
+#---------------------------------------------------------------------------
+
+sub ifconfig_inet
+{
+    my @local_inet = ();
+
+    if ($^O eq 'aix')
+    {
+        my @ip_address = ();
+        my @output     = `/usr/sbin/ifconfig -a`;
+
+        foreach my $line (@output)
+        {
+            ($line =~ /inet ((\d{1,3}?\.){3}(\d){1,3})\s/o)
+              && (push @local_inet, $1);
+        }
+    }
+
+    elsif ($^O eq 'linux')
+    {
+        my @ip_address = ();
+        my @output     = `/sbin/ifconfig -a`;
+
+        foreach my $line (@output)
+        {
+            ($line =~ /inet addr:((\d{1,3}?\.){3}(\d){1,3})\s/o)
+              && (push @local_inet, $1);
+        }
+    }
+}

 #---------------------------------------------------------------------------

@@ -696,20 +754,8 @@ sub pping_hostnames
    my ($class, @hostnames) = @_;

    my $hostname_list = join ",", @hostnames;
-    # read site table, usefping attribute
-    # if set then run pping -f to use fping
-    # this fixes a broken nmap in Redhat 6.2 with ip alias (3512)
-    my $cmd="$::XCATROOT/bin/pping $hostname_list";  # default
-    my @usefping=xCAT::TableUtils->get_site_attribute("usefping");
-    if ((defined($usefping[0])) && ($usefping[0] eq "1")) {
-       $cmd = "$::XCATROOT/bin/pping -f  $hostname_list";
-    }
-    #my $rsp={};
-    #$rsp->{data}->[0] = "running command $cmd";
-    #xCAT::MsgUtils->message("I", $rsp, $::CALLBACK);
-
    my @output =
-      xCAT::Utils->runcmd($cmd, -1);
+      xCAT::Utils->runcmd("$::XCATROOT/bin/pping $hostname_list", -1);
      if ($::RUNCMD_RC !=0) {
        my $rsp={};
        $rsp->{error}->[0] = "Error from pping";
@@ -39,7 +39,7 @@ sub update_discovery_data {
    $disdata{'discoverytime'} = $currtime;

    foreach my $attr (keys %$request) {
-        if ($attr =~ /^(command|discoverymethod|_xcat|cacheonly|noderange|environment|method|discoverytime|updateswitch)/) {
+        if ($attr =~ /^(command|discoverymethod|_xcat|cacheonly|noderange|environment)/) {
            next;
        } elsif ($attr =~ /^(node|uuid|arch|cpucount|cputype|memory|mtm|serial)$/) {
            $disdata{$attr} = $request->{$attr}->[0];
@@ -67,7 +67,7 @@ sub getHcpAttribs
 	}
    }
    
-    my @ps = $tabs->{ppc}->getAllNodeAttribs(['node','parent','nodetype','hcp','id']); 
+    my @ps = $tabs->{ppc}->getAllNodeAttribs(['node','parent','nodetype','hcp']); 
    for my $entry ( @ps ) {
        my $tmp_parent = $entry->{parent};
        my $tmp_node = $entry->{node};
@@ -79,9 +79,6 @@ sub getHcpAttribs
        if (defined($tmp_node) && defined($tmp_type) && ($tmp_type eq "blade") && defined($entry->{hcp})) {
            push @{$ppchash{$tmp_node}{children}}, $entry->{hcp};
        }
-        if (defined($tmp_node) && defined($entry->{id}) && defined($tmp_parent) && defined($tmp_type) && ($tmp_type eq "lpar")) {
-            $ppchash{$tmp_parent}{mapping}{$tmp_node} = $entry->{id};
-        }

 	#if(exists($ppchash{$tmp_node})) {
 	#     if( defined($tmp_type) ) {
@@ -371,19 +368,11 @@ sub fsp_api_action {
            } elsif( $parameter !=0 && $action =~ /^(on|reset)$/ ) {
                #powerinterval for lpars power on
                $cmd = "$fsp_api -a $action -i $parameter -T $tooltype -t $type:$fsp_ip:$id:$node_name:";
-            } elsif ($action =~ /^part_set_lpar_def_state$/) {
-                $cmd = "$fsp_api -a $action -T $tooltype -s $parameter -t $type:$fsp_ip:$id:$node_name:";
-            } elsif (exists($request->{opt}->{vios})) {
-                $cmd = "$fsp_api -a $action -T $tooltype -s 1 -t $type:$fsp_ip:$id:$node_name:$parameter";
            } else {
                $cmd = "$fsp_api -a $action -T $tooltype -t $type:$fsp_ip:$id:$node_name:$parameter";
            }
        } else {
-            if (exists($request->{opt}->{vios})) {
-                $cmd = "$fsp_api -a $action -T $tooltype -s 1 -t $type:$fsp_ip:$id:$node_name:";
-            } else {
-                $cmd = "$fsp_api -a $action -T $tooltype -t $type:$fsp_ip:$id:$node_name:";
-            }
+            $cmd = "$fsp_api -a $action -T $tooltype -t $type:$fsp_ip:$id:$node_name:";
        }
    }
    xCAT::MsgUtils->verbose_message($request, "fsp_api_action cmd:$cmd.");
@@ -13,7 +13,6 @@ use xCAT::GlobalDef;
 use xCAT::Usage;
 use xCAT::NetworkUtils;
 use xCAT::FSPUtils;
-require xCAT::data::ibmhwtypes;
 #use Data::Dumper;

 ##############################################
@@ -260,8 +259,7 @@ sub format_output {
        # Strip errors for results
        #######################################
        my @val = grep( !/^#.*: ERROR /, @$values );
-        #xCAT::PPCdb::add_ppc( $hwtype, \@val );
-        $values = xCAT::PPCdb::update_lpar( $hwtype, \@val, "write");
+        xCAT::PPCdb::add_ppc( $hwtype, \@val );
    }

    ###########################################
@@ -272,8 +270,7 @@ sub format_output {
        # Strip errors for results
        #######################################
        my @val = grep( !/^#.*: ERROR /, @$values );
-        #$values = xCAT::PPCdb::update_ppc( $hwtype, \@val );
-        $values = xCAT::PPCdb::update_lpar( $hwtype, \@val );
+        $values = xCAT::PPCdb::update_ppc( $hwtype, \@val );
        if ( exists( $opt->{x} ) or exists( $opt->{z} ))
        {
            unshift @$values, "hmc";
@@ -394,7 +391,6 @@ sub format_stanza {
        #################################
        # Add each attribute
        #################################
-        my $mtm = undef;
        foreach ( @attribs ) {
            my $d = $data[$i++];

@@ -405,8 +401,7 @@ sub format_stanza {
            } elsif ( /^hwtype$/ ) {        
                $d = $globalhwtype{$type};
            } elsif ( /^groups$/ ) {
-                next;
-                #$d = "$type,all";
+                $d = "$type,all";
            } elsif ( /^mgt$/ ) {
                $d = $hwtype;
            } elsif ( /^cons$/ ) {
@@ -419,9 +414,7 @@ sub format_stanza {
            } elsif ( /^(mtm|serial)$/ ) {
                if ( $type eq "lpar" ) {
                    $d = undef;                    
-                } elsif (/^mtm$/) {
-                    $mtm = $d;
-                }  
+                }     
            } elsif (/^side$/) {
                unless ( $type =~ /^fsp|bpa$/ ) {
                    next;
@@ -429,15 +422,6 @@ sub format_stanza {
            }
            $result .= "\t$_=$d\n";
        }
-        my $tmp_groups = "$type,all";
-        if (defined($mtm)) {
-            my $tmp_pre = xCAT::data::ibmhwtypes::parse_group($mtm);
-            if (defined($tmp_pre)) {
-                $tmp_groups .= ",$tmp_pre";
-            }     
-        }
-        $result .= "\tgroups=$tmp_groups\n";
-
    }
    return( $result );
 }
@@ -480,7 +464,6 @@ sub format_xml {
        #################################
        # Add each attribute 
        #################################
-        my $mtm = undef;
        foreach ( @attribs ) {
            my $d = $data[$i++];

@@ -489,8 +472,7 @@ sub format_xml {
            } elsif ( /^hwtype$/ ) {        
                $d = $globalhwtype{$type};
            } elsif ( /^groups$/ ) {
-                next;
-                #$d = "$type,all";
+                $d = "$type,all";
            } elsif ( /^mgt$/ ) {
                $d = $hwtype;
            } elsif ( /^cons$/ ) {
@@ -502,8 +484,6 @@ sub format_xml {
            } elsif ( /^(mtm|serial)$/ ) {
                if ( $type eq "lpar" ) {
                    $d = undef;
-                } elsif (/^mtm$/) {
-                    $mtm = $d;
                }
            } elsif (/^side$/) {
                unless ( $type =~ /^fsp|bpa$/ ) {
@@ -512,15 +492,6 @@ sub format_xml {
            }
            $href->{Node}->{$_} = $d;
        }
-        my $tmp_groups = "$type,all";
-        if (defined($mtm)) {
-            my $tmp_pre = xCAT::data::ibmhwtypes::parse_group($mtm);
-            if (defined($tmp_pre)) {
-                $tmp_groups .= ",$tmp_pre";
-            }     
-        }
-        $href->{Node}->{groups}=$tmp_groups;
-
        #print Dumper($href);
        #################################
        # XML encoding
@@ -435,7 +435,7 @@ sub lcds {
    if( $type eq "lpar" ) {
        $action = "query_lcds";
    } elsif ($type eq "blade") {
-        $action = "pblade_query_lcds";
+        $action = "pblade_query_lcds";  
    } else {
        $action = "cec_query_lcds";
    } 
@@ -37,7 +37,6 @@ $::NODETYPE_MP="mp";
 $::STATUS_SYNCING="syncing";
 $::STATUS_OUT_OF_SYNC="out-of-sync";
 $::STATUS_SYNCED="synced";
-$::STATUS_FAILED="failed";


 # valid values for nodelist.status columns or other status 
@@ -56,7 +55,6 @@ $::STATUS_SHELL="shell";
 $::STATUS_DEFINED="defined";
 $::STATUS_UNKNOWN="unknown";
 $::STATUS_FAILED="failed";
-$::STATUS_BMCREADY="bmcready";
 %::VALID_STATUS_VALUES = (
 	$::STATUS_ACTIVE=>1,
 	$::STATUS_INACTIVE=>1,
@@ -73,7 +71,6 @@ $::STATUS_BMCREADY="bmcready";
 	$::STATUS_DEFINED=>1,
 	$::STATUS_UNKNOWN=>1,
        $::STATUS_FAILED=>1,
-        $::STATUS_BMCREADY=>1,

 	$::STATUS_SYNCING=>1,
 	$::STATUS_OUT_OF_SYNC=>1,
@@ -893,12 +893,12 @@ sub dolitesetup
    	}
 	}

-	if (-e $litetreetable) {
-		my $rc = xCAT::Utils->runcmd("rm $litetreetable", -1);
+	if (-e $litetreetab) {
+		my $rc = xCAT::Utils->runcmd("rm $litetreetab", -1);
 		if ($::RUNCMD_RC != 0)
    	{
        	my $rsp;
-        	push @{$rsp->{data}}, "Could not remove existing $litetreetable file.";
+        	push @{$rsp->{data}}, "Could not remove existing $litetreetab file.";
        	xCAT::MsgUtils->message("E", $rsp, $callback);
        	return 1;
    	}
@@ -1023,7 +1023,7 @@ sub dolitesetup
        $nrange = join(',',@nodel);
    }

-	@flist = xCAT::Utils->runcmd("/opt/xcat/bin/litefile $nrange", -1);
+	my @flist = xCAT::Utils->runcmd("/opt/xcat/bin/litefile $nrange", -1);
    if (scalar(@flist) > 0) {
        foreach my $l (@flist) {
 			my ($j1, $j2, $file) = split /\s+/, $l;
@@ -1132,11 +1132,7 @@ sub dolitesetup
        # $file could be full path file name or dir name
        # ex. /foo/bar/  or /etc/lppcfg
        my ($node, $option, $file) = split (/\|/, $line);
-
-		if (!$file) {
-			next;
-       	}
-
+        
        # ex. .../inst_root/foo/bar/  or .../inst_root/etc/lppcfg
        my $instrootfile = $instrootloc . $file;

@@ -1353,16 +1349,6 @@ sub dolitesetup
 					return 1;
 				}

-				# also copy $instrootloc/.statelite contents
-				$ccmd = "/usr/bin/cp -p -r $instrootloc/.statelite $SRloc";
-				$out = xCAT::Utils->runcmd("$ccmd", -1);
-				if ($::RUNCMD_RC != 0)
-				{
-					my $rsp;
-					push @{$rsp->{data}}, "Could not copy $instrootloc/.statelite to $SRloc.";
-					xCAT::MsgUtils->message("E", $rsp, $callback);
-					return 1;
-				}
 			}
 		}
 	}
@@ -827,7 +827,7 @@ sub get_mac_addr {
    $done[0] = 0;
    $cmd[0] = "\" local-mac-address\" ". $phandle . " get-package-property\r";
    $msg[0] = "Status: return code and mac-address now on stack\n";
-    $pattern[0] = "local-mac-address.*ok";#"\s*3 >";
+    $pattern[0] = "ok";#"\s*3 >";
    $newstate[0] = 1;

    # cmd(1) is a dot (.). This is a stack manipulation command that removes one
@@ -1231,8 +1231,8 @@ sub  ping_server{
    $done[2] = 0;
    $cmd[2] = "dev /packages/net\r";
    $msg[2] = "Status: selected the /packages/net node as the active package\n";
-    $pattern[2] = ".*dev.*packages.*net(.*)ok(.*)0 >(.*)";
-    #$pattern[2] = "ok";
+    #$pattern[2] = ".*dev(.*)ok(.*)0 >(.*)";
+    $pattern[2] = "ok";
    $newstate[2]= 3;

    # state 3, ping the server
@@ -1266,7 +1266,6 @@ sub  ping_server{
    # state 5, all done
    $done[5] = 1;

-
    # for ping, only need to set speed and duplex for ethernet adapters
    #
    if ( $list_type eq "ent" ) {
@@ -1324,10 +1323,8 @@ sub  ping_server{

    $timeout = 300;
    while ( $done[$state] eq 0 ) {
-
        send_command($verbose, $rconsole, $cmd[$state]);
        @result = $rconsole->expect(
-
            $timeout,
            [qr/$pattern[$state]/s=>
            sub {
@@ -1365,9 +1362,7 @@ sub  ping_server{
                }
            ],
        );
-
-       return 1 if ($rc eq 1);
-
+        return 1 if ($rc eq 1);
        if ( $state eq 1 ) {
            $adap_conn = $adap_conn_list[$j];
            $cmd[1] = "\" ethernet,$adap_speed,$adap_conn,$adap_duplex\" encode-string \" chosen-network-type\" property\r";
@@ -1854,14 +1849,6 @@ sub boot_network {
                $state = $newstate[$state];
                }
            ],
-            # For some old firmware, does not output "----"
-            [qr/BOOTP/=>
-                sub {
-                nc_msg ($verbose, $msg[$state]);
-                $rconsole->clear_accum();
-                $state = $newstate[$state];
-                }
-            ],
            [qr/]/=>
                sub {
                nc_msg($verbose, "Unexpected prompt\n");
@@ -1930,28 +1917,7 @@ sub Boot {
        #],
        [qr/BOOTP/=>      #-ex
            sub {
-                nc_msg($verbose, "# Network boot proceeding - matched BOOTP, exiting.\n");
-                $rconsole->clear_accum();
-            }
-        ],
-        # Welcome to AIX - some old firmware does not output BOOTP or ----
-        [qr/Welcome/=>      #-ex
-            sub {
-                nc_msg($verbose, "# Network boot proceeding - matched Welcome, exiting.\n");
-                $rconsole->clear_accum();
-            }
-        ],
-        # tftp file download - some old firmware does not output BOOTP or ----
-        [qr/FILE/=>      #-ex
-            sub {
-                nc_msg($verbose, "# Network boot proceeding - matched FILE.\n");
-                $rconsole->clear_accum();
-            }
-        ],
-        # some old firmware does not output BOOTP or ----
-        [qr/Elapsed/=>      #-ex
-            sub {
-                nc_msg($verbose, "# Network boot proceeding - matched Elapsed, exiting.\n");
+                nc_msg($verbose, "# Network boot proceeding, exiting.\n");
                $rconsole->clear_accum();
            }
        ],
@@ -2055,46 +2021,14 @@ sub multiple_open_dev {
                 ; \r";
    send_command($verbose, $rconsole, $command);

-    $timeout = 30;
-    $rconsole->expect(
-        $timeout,
-        [qr/new-open-dev(.*)ok/=>
-        #[qr/>/=>
-            sub {
-                nc_msg($verbose, "Status: at End of multiple_open_dev \n");
-                $rconsole->clear_accum();
-             }
-        ],
-        [qr/]/=>
-            sub {
-                nc_msg($verbose, "Unexpected prompt\n");
-                $rconsole->clear_accum();
-                $rc = 1;
-             }
-        ],
-        [timeout =>
-            sub {
-                send_user(2, "Timeout\n");
-                $rconsole->clear_accum();
-                $rc = 1;
-            }
-        ],
-        [eof =>
-            sub {
-                send_user(2, "Cannot connect to $node\n");
-                $rconsole->clear_accum();
-                $rc = 1;
-            }
-        ],
-    );
-
    $command = "patch new-open-dev open-dev net-ping \r";
    send_command($verbose, $rconsole, $command);

+    $timeout = 30;
    $rconsole->expect(
        $timeout,
-        [qr/patch new-open-dev(.*)ok/=>
-        #[qr/>/=>
+        #[qr/patch new-open-dev(.*)>/=>
+        [qr/>/=>
            sub {
                nc_msg($verbose, "Status: at End of multiple_open_dev \n");
                $rconsole->clear_accum();
@@ -2123,7 +2057,6 @@ sub multiple_open_dev {
            }
        ],
    );
-
    return $rc;
 }
 ###################################################################
@@ -2607,7 +2540,7 @@ sub lparnetbootexp
    ####################################
    nc_msg($verbose, "Connecting to the $node.\n");
    sleep 3;
-    $timeout = 10;
+    $timeout = 2;
    $rconsole->expect(
        $timeout,
        [ qr/Enter.* for help.*/i =>
@@ -2816,8 +2749,6 @@ sub lparnetbootexp
    $done = 0;
    $retry_count = 0;

-    $timeout = 10;
-
    while (!$done) {
        my @result = $rconsole->expect(
            $timeout,
@@ -2925,7 +2856,6 @@ sub lparnetbootexp
        }
    }

-
    ##############################
    # Call multiple_open_dev to
    # circumvent firmware OPEN-DEV
@@ -2960,7 +2890,6 @@ sub lparnetbootexp
            $match_pat = ".*";
        }

-
        if($colon) {
            nc_msg($verbose, "#Type:Location_Code:MAC_Address:Full_Path_Name:Ping_Result:Device_Type:Size_MB:OS:OS_Version:\n");
            $outputarrayindex++;  # start from 1, 0 is used to set as 0
@@ -3014,7 +2943,7 @@ sub lparnetbootexp
        } else {
            for( $i = 0; $i < $adapter_found; $i++) {
                if ($adap_type[$i] =~ /$match_pat/) {
-                    if (!($adap_type[$i] eq "hfi-ent")) {
+                    if ($adap_type[$i] eq "hfi-ent") {
                        $mac_address = get_mac_addr($phandle_array[$i], $rconsole, $node, $verbose);
                        $loc_code = get_adaptr_loc($phandle_array[$i], $rconsole, $node, $verbose);
                    }
@@ -3219,12 +3148,12 @@ sub lparnetbootexp
                    }
                ],
            );
-            return [1] if ($rc eq 1);
-            nc_msg($verbose, "# bootp sent over network.\n");
-            $rc = Boot($rconsole, $node, $verbose);#, @expect_out);
-            unless ($rc eq 0) {
-                nc_msg($verbose, "Can't boot here. \n");
-            }
+        return [1] if ($rc eq 1);
+        }
+        nc_msg($verbose, "# bootp sent over network.\n");
+        $rc = Boot($rconsole, $node, $verbose);#, @expect_out);
+        unless ($rc eq 0) {
+            nc_msg($verbose, "Can't boot here. \n");
        }
    }

@@ -10,7 +10,7 @@ if ($^O =~ /^aix/i) {
 }

 use strict;
-use Sys::Syslog;
+use Sys::Syslog qw (:DEFAULT setlogsock);
 use xCAT::Utils;
 #use locale;
 use Socket;
@@ -456,7 +456,8 @@ sub message

        # If they want this msg to also go to syslog, do that now
        eval {
-            openlog("xCAT", "nofatal,pid", "local4");
+            openlog("xCAT", '', 'local4');
+            setlogsock(["tcp", "unix", "stream"]);
            if ($sev eq 'SE') {
              syslog("err", $rsp);
            } else {
@@ -502,7 +503,8 @@ sub message
            {
                print $stdouterrf "Unable to open auditlog\n";
                eval {
-                    openlog("xCAT", "nofatal,pid", "local4");
+                    openlog("xCAT", '', 'local4');
+                    setlogsock(["tcp", "unix", "stream"]);
                    syslog("err", "Unable to write to auditlog");
                    closelog();
                };
@@ -519,7 +521,8 @@ sub message
        {    # error
            print $stdouterrf "Unable to open auditlog\n";
            eval {
-                openlog("xCAT", "nofatal,pid", "local4");
+                openlog("xCAT", '', 'local4');
+                setlogsock(["tcp", "unix", "stream"]);
                syslog("err", "Unable to open auditlog");
                closelog();
            };
@@ -0,0 +1,271 @@
+# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
+package xCAT::NameRange;
+require xCAT::Table;
+require Exporter;
+use strict;
+
+#Perl implementation of namerange
+#  NOTE:  This is identical to xCAT::NodeRange except that no
+#		  database access occurs, no nodes are verified, and 
+#         no nodegroups are expanded.
+#		  Made a new utility since NodeRange is used EVERYWHERE in
+#		  xCAT code and did not want to risk de-stabilizing existing code.
+our @ISA = qw(Exporter);
+our @EXPORT = qw(namerange);
+
+my $recurselevel=0;
+
+
+sub subnodes (\@@) {
+    #Subtract set of nodes from the first list
+    my $nodes = shift;
+    my $node;
+    foreach $node (@_) {
+        @$nodes = (grep(!/^$node$/,@$nodes));
+    }
+}
+
+sub expandatom {
+	my $atom = shift;
+    my @nodes= ();
+    if ($atom =~ /^\(.*\)$/) {     # handle parentheses by recursively calling namerange()
+      $atom =~ s/^\((.*)\)$/$1/;
+      $recurselevel++;
+      return namerange($atom);
+    }
+    if ($atom =~ /@/) {
+          $recurselevel++;
+          return namerange($atom);
+     }
+
+	if ($atom =~ m/^\//) { # A regular expression - not supported in namerange
+          return ($atom);
+	}
+
+	if ($atom =~ m/(.*)\[(.*)\](.*)/) { # square bracket range
+	#for the time being, we are only going to consider one [] per atom
+	#xcat 1.2 does no better
+		my @subelems = split(/([\,\-\:])/,$2);
+		my $subrange="";
+		while (my $subelem = shift @subelems) {
+			my $subop=shift @subelems;
+			$subrange=$subrange."$1$subelem$3$subop";
+		}
+		foreach (split /,/,$subrange) {
+			my @newnodes=expandatom($_);
+			@nodes=(@nodes,@newnodes);
+		}
+		return @nodes;
+	}
+
+	if ($atom =~ m/\+/) {  # process the + operator
+		$atom =~ m/^([^0-9]*)([0-9]+)([^\+]*)\+([0-9]+)/;
+		my $pref=$1;
+		my $startnum=$2;
+		my $suf=$3;
+		my $end=$4+$startnum;
+        my $endnum = sprintf("%d",$end);
+        if (length ($startnum) > length ($endnum)) {
+          $endnum = sprintf("%0".length($startnum)."d",$end);
+        }
+		foreach ("$startnum".."$endnum") {
+			my @addnodes=expandatom($pref.$_.$suf);
+			@nodes=(@nodes,@addnodes);
+		}
+		return (@nodes);
+	}
+
+    if ($atom =~ m/[-:]/) { # process the minus range operator
+      my $left;
+      my $right;
+      if ($atom =~ m/:/) {
+        ($left,$right)=split /:/,$atom;
+      } else {
+        my $count= ($atom =~ tr/-//);
+        if (($count % 2)==0) { #can't understand even numbers of - in range context
+         # we might not really be in range context
+           return  ($atom);
+        }
+        my $expr="([^-]+?".("-[^-]*"x($count/2)).")-(.*)";
+        $atom =~ m/$expr/;
+        $left=$1;
+        $right=$2;
+      }
+      if ($left eq $right) { #if they said node1-node1 for some strange reason
+		return expandatom($left);
+      }
+      my @leftarr=split(/(\d+)/,$left);
+      my @rightarr=split(/(\d+)/,$right);
+      if (scalar(@leftarr) != scalar(@rightarr)) { #Mismatch formatting..
+        # guess it's meant to be a nodename
+        return  ($atom);
+      }
+      my $prefix = "";
+      my $suffix = "";
+      foreach (0..$#leftarr) {
+        my $idx = $_;
+        if ($leftarr[$idx] =~ /^\d+$/ and $rightarr[$idx] =~ /^\d+$/) { #pure numeric component
+          if ($leftarr[$idx] ne $rightarr[$idx]) { #We have found the iterator (only supporting one for now)
+            my $prefix = join('',@leftarr[0..($idx-1)]); #Make a prefix of the pre-validated parts
+            my $luffix; #However, the remainder must still be validated to be the same
+            my $ruffix;
+            if ($idx eq $#leftarr) {
+              $luffix="";
+              $ruffix="";
+            } else {
+              $ruffix = join('',@rightarr[($idx+1)..$#rightarr]);
+              $luffix = join('',@leftarr[($idx+1)..$#leftarr]);
+            }
+            if ($luffix ne $ruffix) { #the suffixes mismatched..
+              return ($atom);
+            }
+            foreach ($leftarr[$idx]..$rightarr[$idx]) {
+              my @addnodes=expandatom($prefix.$_.$luffix);
+              @nodes=(@nodes,@addnodes);
+            }
+            return (@nodes); #the return has been built, return, exiting loop and all
+          }
+        } elsif ($leftarr[$idx] ne $rightarr[$idx]) {
+          return ($atom);
+        }
+        $prefix .= $leftarr[$idx]; #If here, it means that the pieces were the same, but more to come
+      }
+      #I cannot conceive how the code could possibly be here, but whatever it is, it must be questionable
+      return  ($atom);
+	}
+
+	return ($atom);
+}
+
+sub namerange {
+  #We for now just do left to right operations
+  my $range=shift;
+  my %nodes = ();
+  my %delnodes = ();
+  my $op = ",";
+  my @elems = split(/(,(?![^[]*?])(?![^\(]*?\)))/,$range); # commas outside of [] or ()
+  if (scalar(@elems)==1) {
+      @elems = split(/(@(?![^\(]*?\)))/,$range);  # only split on @ when no , are present (inner recursion)
+  }
+
+  while (my $atom = shift @elems) {
+    if ($atom =~ /^-/) {           # if this is an exclusion, strip off the minus, but remember it
+      $atom = substr($atom,1);
+      $op = $op."-";
+    }
+
+    if ($atom =~ /^\^(.*)$/) {    # get a list of nodes from a file
+      open(NRF,$1);
+      while (<NRF>) {
+        my $line=$_;
+        unless ($line =~ m/^[\^#]/) {
+          $line =~ m/^([^:	 ]*)/;
+          my $newrange = $1;
+          chomp($newrange);
+          $recurselevel++;
+          my @filenodes = namerange($newrange);
+          foreach (@filenodes) {
+            $nodes{$_}=1;
+          }
+        }
+      }
+      close(NRF);
+      next;
+    }
+
+    my %newset = map { $_ =>1 } expandatom($atom);    # expand the atom and make each entry in the resulting array a key in newset
+
+    if ($op =~ /@/) {       # compute the intersection of the current atom and the node list we have received before this
+      foreach (keys %nodes) {
+        unless ($newset{$_}) {
+          delete $nodes{$_};
+        }
+      }
+    } elsif ($op =~ /,-/) {        # add the nodes from this atom to the exclude list
+		foreach (keys %newset) {
+			$delnodes{$_}=1; #delay removal to end
+		}
+	} else {          # add the nodes from this atom to the total node list
+		foreach (keys %newset) {
+			$nodes{$_}=1;
+		}
+	}
+	$op = shift @elems;
+
+    }    # end of main while loop
+
+    # Now remove all the exclusion nodes
+    foreach (keys %nodes) {
+		if ($delnodes{$_}) {
+			delete $nodes{$_};
+		}
+    }
+    if ($recurselevel) {
+        $recurselevel--;
+    }
+    return sort (keys %nodes);
+
+}
+
+
+1;
+
+=head1 NAME
+
+xCAT::NameRange - Perl module for xCAT namerange expansion
+
+=head1 SYNOPSIS
+
+	use xCAT::NameRange;
+	my @nodes=namerange("storage@rack1,node[1-200],^/tmp/nodelist,node300-node400,node401+10,500-550");
+
+=head1 DESCRIPTION
+
+namerange interprets xCAT noderange formatted strings and returns a list of 
+names. The following two operations are supported on elements, and interpreted 
+left to right:
+
+  , union next element with everything to the left.
+
+  @ take intersection of element to the right with everything on the left 
+   (i.e. mask out anything to the left not belonging to what is described to 
+   the right)
+
+Each element can be a number of things:
+
+  A node name, i.e.:
+
+=item * node1
+
+A hyphenated node range (only one group of numbers may differ between the left and right hand side, and those numbers will increment in a base 10 fashion):
+
+node1-node200 node1-compute-node200-compute
+node1:node200 node1-compute:node200-compute
+
+A namerange denoted by brackets:
+
+node[1-200] node[001-200]
+
+A regular expression describing the namerange:
+
+/d(1.?.?|200)
+
+A node plus offset (this increments the first number found in nodename):
+
+node1+199
+
+And most of the above substituting groupnames.
+3C
+3C
+
+NameRange tries to be intelligent about detecting padding, so you can:
+node001-node200
+And it will increment according to the pattern.
+
+
+=head1 COPYRIGHT
+
+Copyright 2007 IBM Corp.  All rights reserved.
+
+
+=cut
@@ -19,7 +19,6 @@ use File::Path;
 use Math::BigInt;
 use Socket;
 use xCAT::GlobalDef;
-use Data::Dumper;
 use strict;
 use warnings "all";
 my $socket6support = eval { require Socket6 };
@@ -423,6 +422,11 @@ sub ishostinsubnet {
    if ($ip =~ /:/) {#ipv6
        $numbits=128;
    }
+    # IPv6 subnet with netmask postfix like /64
+    if ($subnet && ($subnet =~ /\//))
+    {
+        $subnet =~ s/\/.*$//;
+    }
    if ($mask) {
 	if ($mask =~ /\//) {
 	    $mask =~ s/^\///;
@@ -438,10 +442,6 @@ sub ishostinsubnet {
            die "ishostinsubnet must either be called with a netmask or CIDR /bits notation";
        }
    }
-    if ($subnet && ($subnet =~ /\//)) #remove CIDR suffix from subnet
-    {
-        $subnet =~ s/\/.*$//;
-    }
    $ip = getipaddr($ip,GetNumber=>1);
    $subnet = getipaddr($subnet,GetNumber=>1);
    $ip &= $mask;
@@ -697,26 +697,19 @@ sub get_nic_ip
        #      Base address:0x2600 Memory:fbfe0000-fc0000080
        #
        # eth1 ...
-        # Redhat7
-        #eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
-        # inet 10.1.0.178  netmask 255.255.0.0  broadcast 10.1.255.255
        #
        ##############################################################
        my @adapter= split /\n{2,}/, $result;
        foreach ( @adapter ) {
-            if ( !($_ =~ /LOOPBACK/ ) and
-                   $_ =~ /UP( |,|>)/ and 
-                   $_ =~ /$mode/ ) {
+            if ( !($_ =~ /LOOPBACK / ) and
+                   $_ =~ /UP / and
+                   $_ =~ /$mode / ) {
                my @ip = split /\n/;
                for my $ent ( @ip ) {
                    if ($ent =~ /^(eth\d|ib\d|hf\d)\s+/) {
                        $nic = $1;
-                    }   
-                    if ($ent =~ /^(eth\d:|ib\d:|hf\d:)\s+/) {
-                        $nic = $1;
-                    }   
-                    $ent=~ s/addr://;   # works for Redhat7 also
-                    if ( $ent =~ /^\s*inet \s*(\d+\.\d+\.\d+\.\d+)/ ) {
+                    }    
+                    if ( $ent =~ /^\s*inet addr:\s*(\d+\.\d+\.\d+\.\d+)/ ) {
                        $iphash{$nic} = $1; 
                        next;
                    }
@@ -1628,10 +1621,8 @@ sub gethost_ips
            else
            {
                my ($inet, $addr1, $Bcast, $Mask) = split(" ", $addr);
-                #@ip = split(":", $addr1);
-                #push @ipaddress, $ip[1];
-                $addr1 =~ s/.*://;
-                push @ipaddress, $addr1;
+                @ip = split(":", $addr1);
+                push @ipaddress, $ip[1];
            }
        }
        else
@@ -1991,108 +1982,6 @@ sub isIpaddr
    }
 }

-
-#-------------------------------------------------------------------------------
-=head3  getSubnetGateway 
-    Description:
-        Get gateway from the networks table of the specified net. 
-
-    Arguments:
-        net: the net, ie. the "net" field of the networks table
-    Returns:
-        Return a string, of the gateway
-        undef - Failed to get the gateway
-    Globals:
-        none
-    Error:
-        none
-    Example:
-        my $gateway = xCAT::NetworkUtils::getSubnetGateway('192.168.1.0');
-    Comments:
-        none
-
-=cut
-#-------------------------------------------------------------------------------
-sub getSubnetGateway
-{
-   my $netname=shift;
-   if( $netname =~ /xCAT::NetworkUtils/)
-   {
-      $netname=shift;
-   }
- 
-   my $gateway=undef;
-   my $nettab = xCAT::Table->new("networks");
-   unless($nettab) { die "No entry defined in networks"; }
-   my @nets = $nettab->getAllAttribs('net','gateway'); 
-   foreach(@nets)
-   {
-      if("$_->{net}" eq "$netname")
-      {
-         $gateway = $_->{gateway};
-         last;
-      }
-   }
-   
-   return $gateway; 
-} 
-
-
-#-------------------------------------------------------------------------------
-=head3  getNodeNameservers 
-    Description:
-        Get nameservers of  specified nodes. 
-        The priority: noderes.nameservers > networks.nameservers > site.nameservers
-    Arguments:
-        node: node name list
-    Returns:
-        Return a hash ref, of the $nameservers{$node}
-        undef - Failed to get the nameservers
-    Globals:
-        none
-    Error:
-        none
-    Example:
-        my $nameservers = xCAT::NetworkUtils::getNodeNameservers(\@node);
-    Comments:
-        none
-
-=cut
-#-------------------------------------------------------------------------------
-sub getNodeNameservers{
-    my $nodes=shift;
-    if( $nodes =~ /xCAT::NetworkUtils/)
-    {
-      $nodes=shift;
-    }
-    my @nodelist = @$nodes;
-    my %nodenameservers;
-    my $nrtab = xCAT::Table->new('noderes',-create=>0);
-    my %nrhash = %{$nrtab->getNodesAttribs(\@nodelist,['nameservers'])};
-    
-    my $nettab = xCAT::Table->new("networks");
-    my %nethash = xCAT::DBobjUtils->getNetwkInfo( \@nodelist );
-
-    my @nameservers = xCAT::TableUtils->get_site_attribute("nameservers");
-    my $sitenameservers=$nameservers[0];
-
-
-    foreach my $node (@nodelist){
-       if ($nrhash{$node} and $nrhash{$node}->[0] and $nrhash{$node}->[0]->{nameservers})
-       {
-           $nodenameservers{$node}=$nrhash{$node}->[0]->{nameservers};
-       }elsif($nethash{$node}{nameservers})
-       {
-           $nodenameservers{$node}=$nethash{$node}{nameservers};
-       }elsif($sitenameservers)
-       {
-           $nodenameservers{$node}=$sitenameservers;
-       }
-    }
-
-    return \%nodenameservers;
-}
-
 #-------------------------------------------------------------------------------

 =head3   getNodeNetworkCfg 
@@ -2119,23 +2008,17 @@ sub getNodeNameservers{
 sub getNodeNetworkCfg
 {
    my $node = shift;
-    if( $node =~ /xCAT::NetworkUtils/)
-    {
-       $node =shift;
-    }  
- 
+
    my $nets = xCAT::NetworkUtils::my_nets();
    my $ip   = xCAT::NetworkUtils->getipaddr($node);
    my $mask = undef;
-    my $gateway = undef;
    for my $net (keys %$nets)
    {
        my $netname;
        ($netname,$mask) = split /\//, $net;
-        $gateway=xCAT::NetworkUtils::getSubnetGateway($netname);
        last if ( xCAT::NetworkUtils::isInSameSubnet( $netname, $ip, $mask, 1));
    }
-    return ($ip, $node, $gateway, xCAT::NetworkUtils::formatNetmask($mask,1,0));
+    return ($ip, $node, undef, xCAT::NetworkUtils::formatNetmask($mask,1,0));
 }

 #-------------------------------------------------------------------------------
@@ -2313,7 +2196,6 @@ sub isValidHostname
    return 0;
 }

-
 #-------------------------------------------------------------------------------

 =head3 isValidFQDN
@@ -2372,26 +2254,6 @@ sub int_to_ip

 #-------------------------------------------------------------------------------

-=head3 getBroadcast
-      Description : Get the broadcast ips
-      Arguments   : ipstr - the IPv4 string ip.
-                    netmask - the subnet mask of network
-      Returns     : bcipint - the IPv4 string of broadcast ip.
-=cut
-
-#-------------------------------------------------------------------------------
-sub getBroadcast
-{
-    my ($class, $ipstr, $netmask) = @_;
-    my $ipint = xCAT::NetworkUtils->ip_to_int($ipstr);
-    my $maskint = xCAT::NetworkUtils->ip_to_int($netmask);
-    my $tmp = sprintf("%d", ~$maskint);
-    my $bcnum = sprintf("%d", ($ipint | $tmp) & hex('0x00000000FFFFFFFF'));
-    return xCAT::NetworkUtils->int_to_ip($bcnum);
-}
-
-#-------------------------------------------------------------------------------
-
 =head3 get_allips_in_range
      Description : Get all IPs in a IP range, return in a list.
      Arguments   : $startip - start IP address
@@ -1,6 +1,5 @@
 # IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
 package xCAT::NodeRange;
-use Text::Balanced qw/extract_bracketed/;
 require xCAT::Table;
 require Exporter;
 use strict;
@@ -149,7 +148,7 @@ sub nodesbycriteria {
 	 }
 	 if ($neednewcache) {
 	   if ($nodelist) { 
-	     #$nodelist->_clear_cache(); 
+	     $nodelist->_clear_cache(); 
 	     $nodelist->_build_cache(\@cachedcolumns);
 	   }
 	  }
@@ -181,14 +180,7 @@ sub nodesbycriteria {
   return \%critnodes;
 }

-# Expand one part of the noderange from the noderange() function.  Initially, one part means the
-# substring between commas in the noderange.  But expandatom also calls itself recursively to
-# further expand some parts.
-# Input args:
-#  - atom to expand
-#  - verify: whether or not to require that the resulting nodenames exist in the nodelist table
-#  - options: genericrange - a purely syntactical expansion of the range, not using the db at all, e.g not expanding group names
-sub expandatom {
+sub expandatom { #TODO: implement table selection as an atom (nodetype.os==rhels5.3)
 	my $atom = shift;
    if ($recurselevel > 4096) { die "NodeRange seems to be hung on evaluating $atom, recursion limit hit"; } 
    unless (scalar(@allnodeset) and (($allnodesetstamp+5) > time())) { #Build a cache of all nodes, some corner cases will perform worse, but by and large it will do better.  We could do tests to see where the breaking points are, and predict how many atoms we have to evaluate to mitigate, for now, implement the strategy that keeps performance from going completely off the rails
@@ -197,28 +189,25 @@ sub expandatom {
        @allnodeset = $nodelist->getAllAttribs('node','groups');
        %allnodehash = map { $_->{node} => 1 } @allnodeset;
    }
-	my $verify = (scalar(@_) >= 1 ? shift : 1);
-  my %options = @_;      # additional options
+	my $verify = (scalar(@_) == 1 ? shift : 1);
        my @nodes= ();
    #TODO: these env vars need to get passed by the client to xcatd
 	my $nprefix=(defined ($ENV{'XCAT_NODE_PREFIX'}) ? $ENV{'XCAT_NODE_PREFIX'} : 'node');
 	my $nsuffix=(defined ($ENV{'XCAT_NODE_SUFFIX'}) ? $ENV{'XCAT_NODE_SUFFIX'} : '');
-
-	if (not $options{genericrange} and  $allnodehash{$atom}) {		#The atom is a plain old nodename
+	if ($allnodehash{$atom}) {		#The atom is a plain old nodename
 		return ($atom);
 	}
    if ($atom =~ /^\(.*\)$/) {     # handle parentheses by recursively calling noderange()
      $atom =~ s/^\((.*)\)$/$1/;
      $recurselevel++;
-      return noderange($atom,$verify,1,%options);
+      return noderange($atom);
    }
    if ($atom =~ /@/) {
          $recurselevel++;
-          return noderange($atom,$verify,1,%options);
+          return noderange($atom);
     }

    # Try to match groups?
-    unless ($options{genericrange}) {
        unless ($grptab) {
           $grptab = xCAT::Table->new('nodegroup');
        }
@@ -280,9 +269,7 @@ sub expandatom {
        }
     }
  }
-}

-    # node selection based on db attribute values (nodetype.os==rhels5.3)
    if ($atom =~ m/[=~]/) { #TODO: this is the clunky, slow code path to acheive the goal.  It also is the easiest to write, strange coincidence.  Aggregating multiples would be nice
        my @nodes;
        foreach (@allnodeset) {
@@ -300,7 +287,7 @@ sub expandatom {
    }
 	if ($atom =~ m/^[0-9]+\z/) {    # if only numbers, then add the prefix
 		my $nodename=$nprefix.$atom.$nsuffix;
-		return expandatom($nodename,$verify,%options);
+		return expandatom($nodename,$verify);
 	}
 	my $nodelen=@nodes;
 	if ($nodelen > 0) {
@@ -308,7 +295,7 @@ sub expandatom {
 	}

 	if ($atom =~ m/^\//) { # A regular expression
-        if ($verify==0 or $options{genericrange}) { # If not in verify mode, regex makes zero possible sense
+        unless ($verify) { # If not in verify mode, regex makes zero possible sense
          return ($atom);
        }
 		#TODO: check against all groups
@@ -322,29 +309,25 @@ sub expandatom {
 	}

 	if ($atom =~ m/(.+?)\[(.+?)\](.*)/) { # square bracket range
-		# if there is more than 1 set of [], we picked off just the 1st.  If there more sets of [], we will expand
-    # the 1st set and create a new set of atom by concatenating each result in the 1st expandsion with the rest
-    # of the brackets.  Then call expandatom() recursively on each new atom.
-		my @subelems = split(/([\,\-\:])/,$2);    # $2 is the range inside the 1st set of brackets
+		# if there are more than 1 [], we picked off just the 1st.  if there is another, we will process it later
+		my @subelems = split(/([\,\-\:])/,$2);
 		my $subrange="";
-    my $subelem;
-    my $start = $1;   # the text before the 1st set of brackets
-    my $ending = $3;    # the text after the 1st set of brackets (could contain more brackets)
-    my $morebrackets = $ending =~ /\[.+?\]/;	# if there are more brackets, we have to expand just the 1st part, then add the 2nd part later
-		while (scalar @subelems) {    # this while loop turns something like a[1-3] into a1-a3 because another section of expand atom knows how to expand that
-      my $subelem = shift @subelems;
+        my $subelem;
+        my $start = $1;
+        my $ending = $3;
+        my $morebrackets = $ending =~ /\[.+?\]/;	# if there are more brackets, we have to expand just the 1st part, then add the 2nd part later
+		while (scalar @subelems) {
+            my $subelem = shift @subelems;
 			my $subop=shift @subelems;
 			$subrange=$subrange."$start$subelem" . ($morebrackets?'':$ending) . "$subop";
 		}
-		foreach (split /,/,$subrange) {   # this foreach is in case there were commas inside the brackets originally, e.g.: a[1,3,5]b[1-2]
-      # this expandatom just expands the part of the noderange that contains the 1st set of brackets
-      # e.g. if noderange is a[1-2]b[1-2] it will create newnodes of a1 and a2
-			my @newnodes=expandatom($_, ($morebrackets?0:$verify), genericrange=>($morebrackets||$options{genericrange}));
+		foreach (split /,/,$subrange) {
+			my @newnodes=expandatom($_, ($morebrackets?0:$verify));
 			if (!$morebrackets) { push @nodes,@newnodes; }
 			else {
-				# for each of the new nodes (prefixes), add the rest of the brackets and then expand recursively
+				# for each of the new nodes, add the 2nd brackets and then expand
 				foreach my $n (@newnodes) {
-					push @nodes, expandatom("$n$ending", $verify, %options);
+					push @nodes, expandatom("$n$ending", $verify);
 				}
 			}
 		}
@@ -366,7 +349,7 @@ sub expandatom {
 			$suf=$nsuffix;
 		}
 		foreach ("$startnum".."$endnum") {
-			my @addnodes=expandatom($pref.$_.$suf,$verify,%options);
+			my @addnodes=expandatom($pref.$_.$suf,$verify);
 			@nodes=(@nodes,@addnodes);
 		}
 		return (@nodes);
@@ -393,7 +376,7 @@ sub expandatom {
        $right=$2;
      }
      if ($left eq $right) { #if they said node1-node1 for some strange reason
-		return expandatom($left,$verify,%options);
+		return expandatom($left,$verify);
      }
      my @leftarr=split(/(\d+)/,$left);
      my @rightarr=split(/(\d+)/,$right);
@@ -430,7 +413,7 @@ sub expandatom {
              }
            }
            foreach ($leftarr[$idx]..$rightarr[$idx]) {
-              my @addnodes=expandatom($prefix.$_.$luffix,$verify,%options);
+              my @addnodes=expandatom($prefix.$_.$luffix,$verify);
              push @nodes,@addnodes;
            }
            return (@nodes); #the return has been built, return, exiting loop and all
@@ -478,7 +461,7 @@ sub retain_cache { #A semi private operation to be used *ONLY* in the interestin
        %allgrphash=();
    }
 }
-sub extnoderange { #An extended noderange function.  Needed by the GUI as the more straightforward function return format too simple for this.
+sub extnoderange { #An extended noderange function.  Needed as the more straightforward function return format too simple for this.
    my $range = shift;
    my $namedopts = shift;
    my $verify=1;
@@ -504,7 +487,7 @@ sub extnoderange { #An extended noderange function.  Needed by the GUI as the mo
    return $return;
 }
 sub abbreviate_noderange { 
-    #takes a list of nodes or a string and reduces it by replacing a list of nodes that make up a group with the group name itself
+    #takes a list of nodes or a string and abbreviates
    my $nodes=shift;
    my %grouphash;
    my %sizedgroups;
@@ -550,40 +533,16 @@ sub abbreviate_noderange {
    return (join ',',keys %targetelems,keys %nodesleft);
 }

-sub set_arith {
-    my $operand = shift;
-    my $op = shift;
-    my $newset = shift;
-    if ($op =~ /@/) {       # compute the intersection of the current atom and the node list we have received before this
-      foreach (keys %$operand) {
-        unless ($newset->{$_}) {
-          delete $operand->{$_};
-        }
-      }
-    } elsif ($op =~ /,-/) {        # add the nodes from this atom to the exclude list
-		foreach (keys %$newset) {
-            delete $operand->{$_}
-		}
-	} else {          # add the nodes from this atom to the total node list
-		foreach (keys %$newset) {
-			$operand->{$_}=1;
-		}
-	}
-}
-# Expand the given noderange
-# Input args:
-#  - noderange to expand
-#  - verify: whether or not to require that the resulting nodenames exist in the nodelist table
-#  - exsitenode: whether or not to honor site.excludenodes to automatically exclude those nodes from all noderanges
-#  - options: genericrange - a purely syntactical expansion of the range, not using the db at all, e.g not expanding group names
 sub noderange {
  $missingnodes=[];
  #We for now just do left to right operations
  my $range=shift;
  $range =~ s/['"]//g;
  my $verify = (scalar(@_) >= 1 ? shift : 1);
-  my $exsitenode = (scalar(@_) >= 1 ? shift : 1);   # if 1, honor site.excludenodes
-  my %options = @_;      # additional options
+
+  #excludenodes attribute in site table,
+  #these nodes should be excluded for any xCAT commands
+  my $exsitenode = (scalar(@_) >= 1 ? shift : 1);

  unless ($nodelist) { 
    $nodelist =xCAT::Table->new('nodelist',-create =>1); 
@@ -594,45 +553,20 @@ sub noderange {
  }
  my %nodes = ();
  my %delnodes = ();
-  if ($range =~ /\(/) {
-    my ($middle, $end, $start) =
-        extract_bracketed($range, '()', qr/[^()]*/);
-    unless ($middle) { die "Unbalanced parentheses in noderange" }
-    $middle = substr($middle,1,-1);
-    my $op = ",";
-    if ($start =~ m/-$/) { #subtract the parenthetical
-       $op .= "-"
-    } elsif ($start =~ m/\@$/) {
-        $op = "@"
-    }
-    $start =~ s/,-$//;
-    $start =~ s/,$//;
-    $start =~ s/\@$//;
-    %nodes = map { $_ => 1 } noderange($start,$verify,$exsitenode,%options);
-    my %innernodes = map { $_ => 1 } noderange($middle,$verify,$exsitenode,%options);
-    set_arith(\%nodes,$op,\%innernodes);
-    $range = $end;
-  }
-
  my $op = ",";
  my @elems = split(/(,(?![^[]*?])(?![^\(]*?\)))/,$range); # commas outside of [] or ()
  if (scalar(@elems)==1) {
      @elems = split(/(@(?![^\(]*?\)))/,$range);  # only split on @ when no , are present (inner recursion)
  }

-  while (defined(my $atom = shift @elems)) {
-    if ($atom eq '') { next; }
+  while (my $atom = shift @elems) {
    if ($atom eq ',') {
        next;
    }
    if ($atom =~ /^-/) {           # if this is an exclusion, strip off the minus, but remember it
      $atom = substr($atom,1);
      $op = $op."-";
-    } elsif ($atom =~ /^\@/) {           # if this is an exclusion, strip off the minus, but remember it
-      $atom = substr($atom,1);
-      $op = "@";
    }
-    if ($atom eq '') { next; }

    if ($atom =~ /^\^(.*)$/) {    # get a list of nodes from a file
      open(NRF,$1);
@@ -643,7 +577,7 @@ sub noderange {
          my $newrange = $1;
          chomp($newrange);
          $recurselevel++;
-          my @filenodes = noderange($newrange,$verify,$exsitenode,%options);
+          my @filenodes = noderange($newrange);
          foreach (@filenodes) {
            $nodes{$_}=1;
          }
@@ -653,7 +587,7 @@ sub noderange {
      next;
    }

-    my %newset = map { $_ =>1 } expandatom($atom,$verify,%options);    # expand the atom and make each entry in the resulting array a key in newset
+    my %newset = map { $_ =>1 } expandatom($atom,$verify);    # expand the atom and make each entry in the resulting array a key in newset

    if ($op =~ /@/) {       # compute the intersection of the current atom and the node list we have received before this
      foreach (keys %nodes) {
@@ -680,7 +614,7 @@ sub noderange {
        my $badnoderange = 0;
        my @badnodes = ();
 	if ($::XCATSITEVALS{excludenodes}) {
-                @badnodes = noderange($::XCATSITEVALS{excludenodes}, 1, 0, %options);
+                @badnodes = noderange($::XCATSITEVALS{excludenodes}, 1, 0);
                foreach my $bnode (@badnodes) {
                    if (!$delnodes{$bnode}) {
                        $delnodes{$bnode} = 1;
@@ -139,7 +139,7 @@ sub connect {
    my $timeout    = $req->{ppctimeout};
    my $verbose    = $req->{verbose};
    my $ssh;
-    my $expect_log = "/dev/null";
+    my $expect_log;
    my $errmsg;
 	
    if ($req->{command} eq 'rflash') {
@@ -156,7 +156,7 @@ sub connect {
    # Shell prompt regexp based on HW Type 
    ##################################################
    my %prompt = (
-        hmc => "~>\\s*\$",
+        hmc => "~> \$",
        ivm => "\\\$ \$"
    );
    ##################################################
@@ -170,7 +170,7 @@ sub connect {
    ##################################################
    if ( $verbose ) {
        close STDERR;
-        if ( !open( STDERR, '>', $expect_log )) {
+        if ( !open( STDERR, '>', \$expect_log )) {
             return( "Unable to redirect STDERR: $!" );
        }
    }
@@ -179,7 +179,7 @@ sub connect {
    ##################################################
    if ( $verbose ) {
        close STDOUT;
-        if ( !open( STDOUT, '>', $expect_log )) {
+        if ( !open( STDOUT, '>', \$expect_log )) {
             return( "Unable to redirect STDOUT: $!" );
        }
    }
@@ -490,9 +490,6 @@ sub mkhwconn
            my $ntype = $$d[4];
            if ($ntype =~ /^(cec|frame|blade)$/)
            {
-                if ($ntype eq "blade") {
-                    delete $opt->{port};
-                }
                $cnode = xCAT::DBobjUtils::getchildren($node_name, $opt->{port});
            } else {
                $cnode = $node_name;
@@ -7,7 +7,6 @@ use xCAT::GlobalDef;
 use xCAT::Utils;
 use xCAT::TableUtils;
 use xCAT::NetworkUtils;
-require xCAT::data::ibmhwtypes;

 ###########################################
 # Factory defaults
@@ -101,6 +100,7 @@ sub add_ppc {
            $parent,
            $ips,
            $mac ) = split /,/;
+         
        ###############################
        # Update nodetype table
        ###############################
@@ -168,10 +168,6 @@ sub add_ppc {
            # Update nodelist table
            ###########################
            updategroups( $name, $db{nodelist}, $type );
-            my $tmp_group = xCAT::data::ibmhwtypes::parse_group($model);
-            if (defined($tmp_group)) {
-                updategroups($name, $db{nodelist}, $tmp_group);
-            }
            if ( $type =~ /^(fsp|bpa)$/ )  {
                $db{nodelist}->setNodeAttribs( $name, {hidden => '1'});
            } else {
@@ -240,97 +236,6 @@ sub add_ppc {
    }
    return undef;
 }
-##########################################################################
-# Update lpar information in the xCAT databases
-##########################################################################
-sub update_lpar {
-    my $hwtype = shift;
-    my $values = shift;
-    my $write = shift;
-    my @tabs     = qw(ppc vpd nodehm nodelist nodetype ppcdirect hosts mac); 
-    my %db       = ();
-    my @update_list = ();
-    my @write_list = ();
-    ###################################
-    # Open database needed
-    ###################################
-    foreach ( @tabs ) {
-        $db{$_} = xCAT::Table->new( $_, -create=>1, -autocommit=>0 );
-        if ( !$db{$_} ) {
-            return( "Error opening '$_'" );
-        }
-    }
-    my @vpdlist = $db{vpd}->getAllNodeAttribs(['node','serial','mtm','side']);
-    my @ppclist = $db{ppc}->getAllNodeAttribs(['node','hcp','id',
-                                               'pprofile','parent','nodetype',
-                                               'comments', 'disable']);
-    #      'cec,cec1,,8246-L1D,100A9DA,,cec1,,cec1',
-    #      'lpar,10-0A9DA,1,8246-L1D,100A9DA,,cec1,,cec1'
-    my %ppchash = ();
-    my %vpdhash = ();
-    foreach my $ppcent (@ppclist) {
-        if ($ppcent->{id} and $ppcent->{nodetype} and $ppcent->{nodetype} eq "lpar") {
-            my $key = $ppcent->{node};
-            $ppchash{$key}{id} = $ppcent->{id};
-            $ppchash{$key}{parent} = $ppcent->{parent};
-        }
-    }
-    foreach my $vpdent (@vpdlist)
-    {
-        my $key = $vpdent->{node};
-        $vpdhash{$key}{mtm} = $vpdent->{mtm};
-        $vpdhash{$key}{serial} = $vpdent->{serial};
-    }
-    my @ppc_lpars = keys %ppchash; 
-    foreach my $value ( @$values ) {
-        my ($ttype,
-            $tname,
-            $tid,
-            $tmtm,
-            $tsn,
-            $tside,
-            $server,
-            $pprofile,
-            $parent) = split /,/, $value;
-            if ($ttype ne "lpar") {
-                push @update_list, $value;
-                next;
-            }
-            my $find_node = undef;
-            foreach my $tmp_node (@ppc_lpars) {
-                if ($ppchash{$tmp_node}{id} eq $tid) {
-                    if (exists($ppchash{$tmp_node}{parent}) and $ppchash{$tmp_node}{parent} eq $parent) {
-                        $find_node = $tmp_node;
-                        last;
-                    } elsif ($vpdhash{$tmp_node}{mtm} eq $tmtm and $vpdhash{$tmp_node}{serial} eq $tsn) {
-                        $find_node = $tmp_node;
-                        last;
-                    }
-                }
-            }
-            if (defined($find_node)) {
-                if ( update_node_attribs($hwtype, $ttype, $find_node, $tid, $tmtm, $tsn, $tside,
-                                    $server, $pprofile, $parent, "", \%db, $tname, \@ppclist))
-                {
-                    $value =~ s/^$ttype,$tname,/$ttype,$find_node,/; 
-                    push @update_list, $value;  
-                }
-            } elsif (defined($write)) {
-                push @write_list, $value;
-            }
-    }
-    if (defined($write)) {
-        &add_ppc($hwtype, \@write_list);
-        return ([@update_list,@write_list]);
-    } else {
-        foreach ( @tabs ) {
-            if ( exists( $db{$_}{commit} )) {
-               $db{$_}->commit;
-            }
-        }
-        return \@update_list;
-    }
-}

 ##########################################################################
 # Update nodes in the xCAT databases
@@ -373,6 +278,7 @@ sub update_ppc {
            $pprofile,
            $parent,
            $ips ) = split /,/, $value;
+ 
        if ( $ttype eq 'cec' )
        {
            my $hostname =  get_host($tname, "FSP", $tmtm, $tsn, "", "", $tid, "","");
@@ -423,7 +329,9 @@ sub update_ppc {
            $pprofile,
            $parent,
            $ips ) = split /,/, $value;
+         
        next if ( $type ne 'cec' );
+
        my $predefined_node = undef;
        foreach my $vpdent (@vpdlist)
        {
@@ -617,10 +525,6 @@ sub update_node_attribs
    if ( $namediff)
    {
        updategroups( $name, $db->{nodelist}, $type );
-        my $tmp_group = xCAT::data::ibmhwtypes::parse_group($model);
-        if (defined($tmp_group)) {
-            updategroups($name, $db->{nodelist}, $tmp_group);
-        }
        $db->{nodelist}->setNodeAttribs( $name, {status=>$nodelisthash->{status},
                                                 appstatus=>$nodelisthash->{appstatus},
                                                 primarysn=>$nodelisthash->{primarysn},
@@ -984,18 +888,6 @@ sub get_usr_passwd {
    } else {
        ($ent) = $passwdtab->getNodeAttribs($key, qw(username password));
    }
-    if (!$ent) {
-        if ($key eq "cec") {
-            $key = "fsp";
-        } elsif ($key eq "frame") {
-            $key = "bpa";
-        }
-        if ($user) {
-            ($ent) = $passwdtab->getAttribs({key => $key, username => $user}, qw(password cryptmethod));
-        } else {
-            ($ent) = $passwdtab->getNodeAttribs($key, qw(username password));
-        }
-    }
    if (!$ent or !$ent->{password}) {
        my $hash = $default_passwd_accounts{$key};
        if (!$hash or ($user and !defined($hash->{$user}))) {
@@ -1066,6 +958,7 @@ sub get_host {
    # get the information of existed nodes to do the migration

    read_from_table() unless (%::OLD_DATA_CACHE);
+
    foreach my $oldnode ( keys %::OLD_DATA_CACHE )
    {
        my $tmpmtm    = @{$::OLD_DATA_CACHE{$oldnode}}[0];
@@ -5,8 +5,6 @@ use strict;
 use Getopt::Long;
 use xCAT::PPCcli qw(SUCCESS EXPECT_ERROR RC_ERROR NR_ERROR);
 use xCAT::Usage;
-use xCAT::TableUtils;
-require xCAT::data::ibmhwtypes;


 ##########################################
@@ -61,7 +59,7 @@ sub parse_args {
    $Getopt::Long::ignorecase = 0;
    Getopt::Long::Configure( "bundling" );

-    if ( !GetOptions( \%opt, qw(V|verbose t) )) { 
+    if ( !GetOptions( \%opt, qw(V|verbose) )) { 
        return( usage() );
    }
    ####################################
@@ -77,9 +75,6 @@ sub parse_args {
    if ( !defined( $cmd )) {
        return(usage( "Invalid command: $ARGV[0]" ));
    }
-    if (exists($opt{t}) and $cmd ne "model") {
-        return(["Option 't' can only work with 'model'."]);
-    }
    ####################################
    # Check for an extra argument
    ####################################
@@ -416,12 +411,6 @@ sub vpd {
                #############################
                # Output value 
                #############################
-                if ($_ eq 'model' and exists($request->{opt}->{t})) {
-		            my $tmp_pre = xCAT::data::ibmhwtypes::parse_args($data->{$_});
-		            if (defined($tmp_pre))  {
-			            xCAT::TableUtils->updatenodegroups($name, $tmp_pre);
-		            }
-		        }
                my $value = "@{$prefix{$_}}[0]: $data->{$_}"; 
                push @result, [$name,$value,$Rc];   
            }
@@ -11,7 +11,7 @@ use xCAT::PPCdb;
 use xCAT::GlobalDef;
 use xCAT::Usage;
 use xCAT::NetworkUtils;
-require xCAT::data::ibmhwtypes;
+

 ##############################################
 # Globals
@@ -545,7 +545,6 @@ sub format_stanza {
        #################################
        # Add each attribute
        #################################
-        my $mtm = undef;
        foreach ( @attribs ) {
            my $d = $data[$i++];

@@ -556,8 +555,7 @@ sub format_stanza {
            } elsif ( /^hwtype$/ ) {        
                $d = $globalhwtype{$type};
            } elsif ( /^groups$/ ) {
-                next;
-                #$d = "$type,all";
+                $d = "$type,all";
            } elsif ( /^mgt$/ ) {
                $d = $hwtype;
            } elsif ( /^cons$/ ) {
@@ -570,9 +568,7 @@ sub format_stanza {
            } elsif ( /^(mtm|serial)$/ ) {
                if ( $type eq "lpar" ) {
                    $d = undef;                    
-                } elsif (/^mtm$/) {
-                    $mtm = $d;
-                }
+                }     
            } elsif (/^side$/) {
                unless ( $type =~ /^fsp|bpa$/ ) {
                    next;
@@ -580,14 +576,6 @@ sub format_stanza {
            }
            $result .= "\t$_=$d\n";
        }
-        my $tmp_groups = "$type,all";
-        if (defined($mtm)) {
-            my $tmp_pre = xCAT::data::ibmhwtypes::parse_group($mtm);
-            if (defined($tmp_pre)) {
-                $tmp_groups .= ",$tmp_pre";
-            }     
-        }
-        $result .= "\tgroups=$tmp_groups\n";
    }
    return( $result );
 }
@@ -635,7 +623,6 @@ sub format_xml {
        #################################
        # Add each attribute 
        #################################
-        my $mtm = undef; 
        foreach ( @attribs ) {
            my $d = $data[$i++];

@@ -644,8 +631,7 @@ sub format_xml {
            } elsif ( /^hwtype$/ ) {        
                $d = $globalhwtype{$type};
            } elsif ( /^groups$/ ) {
-                next;
-                #$d = "$type,all";
+                $d = "$type,all";
            } elsif ( /^mgt$/ ) {
                $d = $hwtype;
            } elsif ( /^cons$/ ) {
@@ -657,8 +643,6 @@ sub format_xml {
            } elsif ( /^(mtm|serial)$/ ) {
                if ( $type eq "lpar" ) {
                    $d = undef;
-                } elsif (/^mtm$/){
-                    $mtm = $d;
                }
            } elsif (/^side$/) {
                unless ( $type =~ /^fsp|bpa$/ ) {
@@ -667,14 +651,6 @@ sub format_xml {
            }
            $href->{Node}->{$_} = $d;
        }
-        my $tmp_groups = "$type,all";
-        if (defined($mtm)) {
-            my $tmp_pre = xCAT::data::ibmhwtypes::parse_group($mtm);
-            if (defined($tmp_pre)) {
-                $tmp_groups .= ",$tmp_pre";
-            }     
-        }
-        $href->{Node}->{groups}=$tmp_groups;
        #################################
        # XML encoding
        #################################
@@ -52,21 +52,14 @@ sub get_allocable_staticips_innet
    my $netentry = ($networkstab->getAllAttribsWhere("netname = '$netname'", 'ALL'))[0];
    my ($startip, $endip) =  split('-', $netentry->{'staticrange'});
    my $incremental = $netentry->{'staticrangeincrement'};
-    my $netmask = $netentry->{'mask'};
-    my $gateway = $netentry->{'gateway'};
    my $validipsref;
    if ($incremental and $startip and $endip){
        $validipsref = xCAT::NetworkUtils->get_allips_in_range($startip, $endip, $incremental);
    }
-    
-    my $broadcastip = xCAT::NetworkUtils->getBroadcast($startip, $netmask);
    foreach (@$validipsref){
-        #Remove ip which is broadcast ip, exclude ip, ips ended with 0, gateway ip
-        if (exists($iphash{$_}) or $_ eq $broadcastip or $_ eq $gateway 
-            or $_ =~ /^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(0)$/){
-            next;
+        if (! exists($iphash{$_})){
+            push @allocableips, $_;
        }
-        push @allocableips, $_;
    }
    return \@allocableips;
 }
@@ -265,7 +258,6 @@ sub rackformat_to_numricformat{
                    values are attributes of a specific nic, like:
                        type : nic type
                        hostnamesuffix: hostname suffix
-                        hostnameprefix: hostname prefix
                        customscript: custom script for this nic
                        network: network name for this nic
                        ip: ip address of this nic.
@@ -277,7 +269,7 @@ sub get_nodes_nic_attrs{
    my $nodes = shift;

    my $nicstab = xCAT::Table->new( 'nics');
-    my $entry = $nicstab->getNodesAttribs($nodes, ['nictypes', 'nichostnamesuffixes', 'nichostnameprefixes', 'niccustomscripts', 'nicnetworks', 'nicips']);
+    my $entry = $nicstab->getNodesAttribs($nodes, ['nictypes', 'nichostnamesuffixes', 'niccustomscripts', 'nicnetworks', 'nicips']);

    my %nicsattrs;
    my @nicattrslist;
@@ -309,20 +301,6 @@ sub get_nodes_nic_attrs{
            }
        }

-        if($entry->{$node}->[0]->{'nichostnameprefixes'}){
-
-            @nicattrslist = split(",", $entry->{$node}->[0]->{'nichostnameprefixes'});
-            foreach (@nicattrslist){
-                               my @nicattrs;
-                               if ($_  =~ /!/) {
-                                       @nicattrs = split("!", $_);
-                               } else {
-                                       @nicattrs = split(":", $_);
-                               }
-                $nicsattrs{$node}{$nicattrs[0]}{'hostnameprefix'} = $nicattrs[1];
-            }
-        }
-
        if($entry->{$node}->[0]->{'niccustomscripts'}){
            @nicattrslist = split(",", $entry->{$node}->[0]->{'niccustomscripts'});
            foreach (@nicattrslist){
@@ -565,96 +543,6 @@ sub get_allnode_singleattrib_hash

 #-------------------------------------------------------------------------------

-=head3 get_db_swtiches
-      Description : Get all records of switch config from a table, then return a string list.
-      Arguments   : $tabname - the table name.
-      Returns     : Reference of the records hash.
-=cut
-
-#-------------------------------------------------------------------------------
-sub get_db_switches
-{
-    my $class = shift;
-    my $table = xCAT::Table->new("switches");
-    my @attribs = ("switch");
-    my @entries = $table->getAllAttribs(@attribs);
-    $table->close();
-    my %allrecords;
-    foreach (@entries) 
-    {
-        if ($_->{'switch'}){
-            $allrecords{$_->{'switch'}} = 0;
-        }
-    }
-    return \%allrecords;
-}
-
-#-------------------------------------------------------------------------------
-
-=head3 get_db_swtichports
-      Description : Get all records of switch config from a table, then return a string list.
-      Arguments   : $tabname - the table name.
-      Returns     : Reference of the records hash.
-=cut
-
-#-------------------------------------------------------------------------------
-sub get_db_switchports
-{
-    my $class = shift;
-    my $table = xCAT::Table->new("switch");
-    my @attribs = ("switch", "port");
-    my @entries = $table->getAllAttribs(@attribs);
-    $table->close();
-    my %allrecords;
-    foreach (@entries) 
-    {
-        $allrecords{$_->{'switch'} . "_" . $_->{'port'}} = 0;
-    }
-    return \%allrecords;
-}
-
-#-------------------------------------------------------------------------------
-
-=head3 get_all_cecs
-      Description : Get all CEC objects name in system.
-      Arguments   : hashref: if not set, return a array ref.
-                             if set, return a hash ref.
-      Returns     : ref for CECs list.
-      Example     : 
-                    my $arrayref = xCAT::ProfiledNodeUtils->get_all_cecs();
-                    my $hashref = xCAT::ProfiledNodeUtils->get_all_cecs(1);
-=cut
-
-#-------------------------------------------------------------------------------
-sub get_all_cecs
-{
-    my $hashref = shift;
-    my %cecshash;
-    my @cecslist;
-
-    my $ppctab = xCAT::Table->new('ppc');
-    my @cecs = $ppctab->getAllAttribsWhere("nodetype = 'cec'", 'node');
-    foreach (@cecs) {
-        if($_->{'node'}) {
-            if ($hashref) {
-                $cecshash{$_->{'node'}} = 1;
-            } else {
-                push @cecslist, $_->{'node'};
-            }
-        }
-    }
-    $ppctab->close();
-
-    # Return the ref accordingly 
-    if ($hashref) {
-        return \%cecshash;
-    } else {
-        return \@cecslist;
-    }
-}
-
-#-------------------------------------------------------------------------------
-
 =head3 is_discover_started
      Description : Judge whether profiled nodes discovering is running or not.
      Arguments   : NA
@@ -748,27 +636,6 @@ sub get_imageprofile_prov_method

 #-------------------------------------------------------------------------------

-=head3 get_imageprofile_prov_osvers
-      Description : Get A node's provisioning os version and profile from its imageprofile attribute.
-      Arguments   : $imgprofilename - imageprofile name
-      Returns     : node's osversion and profile
-=cut
-
-#-------------------------------------------------------------------------------
-sub get_imageprofile_prov_osvers
-{
-
-    my $class = shift;
-    my $imgprofilename = shift;
-    my $osimgtab = xCAT::Table->new('osimage');
-    my $osimgentry = ($osimgtab->getAllAttribsWhere("imagename = '$imgprofilename'", 'ALL' ))[0];
-    my $osversion = $osimgentry->{'osvers'};
-    my $profile = $osimgentry->{'profile'};
-    return ($osversion, $profile);
-}
-
-#-------------------------------------------------------------------------------
-
 =head3 check_profile_consistent
      Description : Check if three profile consistent
      Arguments   : $imageprofile - image profile name
@@ -834,14 +701,7 @@ sub check_profile_consistent{
    my $mgt = undef;
    $mgt = $mgtentry->{'mgt'} if ($mgtentry->{'mgt'});
    $nodehmtab->close();
-
-    #Get hardwareprofile nodetype
-    my $ppctab = xCAT::Table->new('ppc');
-    my $ntentry = $ppctab->getNodeAttribs($hardwareprofile, ['nodetype']);
-    my $nodetype = undef;
-    $nodetype = $ntentry->{'nodetype'} if ($ntentry->{'nodetype'});
-    $ppctab->close(); 
- 
+    
    # Check if exists provision network
    if (not ($installnic and exists $netprofile_nicshash{$installnic}{"network"})){
        return 0, "Provisioning network not defined for network profile."
@@ -860,24 +720,17 @@ sub check_profile_consistent{
            return 0, "$nictype networkprofile must use with hardwareprofile.";
        }
    }
-       
-    # For nodetype is lpar node, not need to check the nictype as it is not required for lpar node
-    if (not $nictype and $mgt and $nodetype ne 'lpar' ) { 
-        # define hardwareprofile, not define fsp or bmc networkprofile, and the node type is not lpar
+        
+    if (not $nictype and $mgt) { 
+        # define hardwareprofile, not define fsp or bmc networkprofile
        return 0, "$profile_dict{$mgt} hardwareprofile must use with $profile_dict{$mgt} networkprofile.";
    }
    
-    if ($profile_dict{$mgt} ne $nictype and $nodetype ne 'lpar') {
-        # Networkprofile's nictype is not consistent with hadrwareprofile's mgt, and the node type is not lpar
+    if ($profile_dict{$mgt} ne $nictype) {
+        # Networkprofile's nictype is not consistent with hadrwareprofile's mgt
        return 0, "Networkprofile's nictype is not consistent with hardwareprofile's mgt.";
    }
-
-    if ($nodetype eq 'lpar' and $nictype eq 'FSP') 
-    {
-        # can not associate FSP network if the node type is lpar
-        return 0, "The node with hardware type $nodetype can not use with $nictype networkprofile.";
-    }
-        
+    
    return 1, "";
 }

@@ -1036,40 +889,6 @@ sub parse_nodeinfo_file
    return 1, "";
 }

-#-------------------------------------------------------
-
-=head3  update the table prodkey, in order to support windows
-        per node license key
-
-    Returns: $retcode.
-              $retcode = 1. update failed, the value is undef
-              $retcode = 0. save into db is OK..
-=cut
-#-------------------------------------------------------
-
-sub update_windows_prodkey
-{
-    my $class   = shift;
-    my $node    = shift;
-    my $product = shift;
-    my $key     = shift;
-    unless(defined($node) && defined($product) && defined($key))
-    {
-        return 1;
-    }
-    # please notice this db usage
-    my %keyhash;
-    my %updates;
-    $keyhash{'node'}             = $node;
-    $updates{'product'}          = $product;
-    $updates{'key'}              = $key;
-    my $tab = xCAT::Table->new('prodkey', -create=>1, -autocommit=>0);
-    $tab->setAttribs( \%keyhash,\%updates );
-    $tab->commit;
-    $tab->close; 
-    return 0;
-}
-
 #-------------------------------------------------------------------------------
 =head3 check_nicips
    Description: Check if the nicips defined in MAC file is correct
@@ -35,22 +35,21 @@ package xCAT::RemoteShellExp;
                  node.
   DSH_TO_USERID - The userid on the node where the ssh keys will be updated.
   DSH_ENABLE_SSH - Node to node root passwordless ssh will be setup.
-   DSH_ZONE_SSHKEYS  - directory containing the zones root .ssh keys 
+ 

 Usage: remoteshellexp
   [-t node list]  test ssh connection to the node 
   [-k] Generates the ssh keys needed , for the user on the MN. 
   [-s node list]  copies the ssh keys to the nodes 
-   optional $timeout = timeout value for the expect.  Usually from the xdsh -t flag
-   default timeout is 10 seconds
+
    exit 0 - good
    exit 1 - abort
    exit 2 - usage error

 Examples:
-$rc=xCAT::RemoteShellExp->remoteshellexp("k",$callback,$remoteshellcmd,$nodes,$timeout); 
-$rc=xCAT::RemoteShellExp->remoteshellexp("s",$callback,$remoteshellcmd,$nodes,$timeout); 
-$rc=xCAT::RemoteShellExp->remoteshellexp("t",$callback,$remoteshellcmd,$nodes,$timeout); 
+$rc=xCAT::RemoteShellExp->remoteshellexp("k",$callback,$remoteshellcmd); 
+$rc=xCAT::RemoteShellExp->remoteshellexp("s",$callback,$remoteshellcmd,$nodes); 
+$rc=xCAT::RemoteShellExp->remoteshellexp("t",$callback,$remoteshellcmd,$nodes); 

 =cut

@@ -71,7 +70,7 @@ use strict;
 #-----------------------------------------------------------------------------
 sub remoteshellexp 
 {
-  my ($class, $flag, $callback, $remoteshell, $nodes, $timeout) = @_;
+  my ($class, $flag, $callback, $remoteshell, $nodes) = @_;
  my $rc=0;
  $::CALLBACK = $callback;
  if (!($flag))
@@ -91,10 +90,6 @@ sub remoteshellexp
       return 2;
       
  }
-  my  $expecttimeout=10; # default
-  if (defined($timeout)) {  # value supplied
-     $expecttimeout=$timeout;
-  }

  # for -s flag must have nodes and a $to_userid password
  my $to_user_password;
@@ -144,7 +139,7 @@ sub remoteshellexp
  } else {
     $from_userid="root";
  }
-  # set User  on the node where we will send the keys 
+  # set User on the node where we will send the keys 
  # this id can be a local id as well as root 
  if ($ENV{'DSH_TO_USERID'}) {
     $to_userid=$ENV{'DSH_TO_USERID'};
@@ -154,19 +149,18 @@ sub remoteshellexp
  # set User home directory to find the ssh public key to send 
  # For non-root ids information may not be in /etc/passwd
  #  but elsewhere like LDAP 
-   
  if ($ENV{'DSH_FROM_USERID_HOME'}) {
-       $home=$ENV{'DSH_FROM_USERID_HOME'};
+     $home=$ENV{'DSH_FROM_USERID_HOME'};
  } else {
-      $home=xCAT::Utils->getHomeDir($from_userid);
+     $home=xCAT::Utils->getHomeDir($from_userid);
  }
+  
  # This indicates we will generate new ssh keys for the user,
  # if they are not already there
-  # unless using zones
-   my $key="$home/.ssh/id_rsa";
-   my $key2="$home/.ssh/id_rsa.pub";
-   # Check to see if empty
-   if (-z $key) {
+  my $key="$home/.ssh/id_rsa";
+  my $key2="$home/.ssh/id_rsa.pub";
+  # Check to see if empty
+  if (-z $key) {
         my $rsp = {};
         $rsp->{error}->[0] = 
         "The $key file is empty. Remove it and rerun the command.";
@@ -184,8 +178,9 @@ sub remoteshellexp
  } 
  if (($flag eq "k") && (!(-e $key))) 
  {
-     # updating keys and the key file does not exist 
-     $rc=xCAT::RemoteShellExp->gensshkeys($expecttimeout);
+     # if the file size of the id_rsa key is 0, tell them to remove it
+     # and run the command again
+     $rc=xCAT::RemoteShellExp->gensshkeys;
  }
  # send ssh keys to the nodes/devices, to setup passwordless ssh 
  if ($flag eq "s")
@@ -198,18 +193,15 @@ sub remoteshellexp
         return 1;
    }
    if ($ssh_setup_cmd) { # setup ssh on devices
-     $rc=xCAT::RemoteShellExp->senddeviceskeys($remoteshell,$remotecopy,$to_userid,$to_user_password,$home,$ssh_setup_cmd,$nodes, $expecttimeout);
+     $rc=xCAT::RemoteShellExp->senddeviceskeys($remoteshell,$remotecopy,$to_userid,$to_user_password,$home,$ssh_setup_cmd,$nodes);
    } else {  #setup ssh on nodes
-     if ($ENV{'DSH_ZONE_SSHKEYS'}) {   # if using zones the override the location of the keys
-        $home= $ENV{'DSH_ZONE_SSHKEYS'};
-     }  
-     $rc=xCAT::RemoteShellExp->sendnodeskeys($remoteshell,$remotecopy,$to_userid,$to_user_password,$home,$nodes, $expecttimeout);
+     $rc=xCAT::RemoteShellExp->sendnodeskeys($remoteshell,$remotecopy,$to_userid,$to_user_password,$home,$nodes);
    } 
  }
  # test ssh setup on the node
  if ($flag eq "t")
  {
-     $rc=xCAT::RemoteShellExp->testkeys($remoteshell,$to_userid,$nodes,$expecttimeout);
+     $rc=xCAT::RemoteShellExp->testkeys($remoteshell,$to_userid,$nodes);
  }
  return $rc;
 }
@@ -228,9 +220,9 @@ sub remoteshellexp
 sub gensshkeys 

 {
-    my ($class, $expecttimeout) = @_;
+    my ($class) = @_;
    my $keygen;
-    my $timeout  = $expecttimeout;    # sets Expect default timeout, 0 accepts immediately
+    my $timeout  = 10;    # sets Expect default timeout, 0 accepts immediately
    my $keygen_sent = 0;
    my $prompt1   = 'Generating public/private rsa';
    my $prompt2   = 'Enter file.*:';
@@ -355,9 +347,9 @@ sub gensshkeys
 sub testkeys 

 {
-    my ($class,$remoteshell,$to_userid,$nodes, $expecttimeout) = @_;
+    my ($class,$remoteshell,$to_userid,$nodes) = @_;
    my $testkeys;
-    my $timeout  = $expecttimeout;    # sets Expect default timeout
+    my $timeout  = 10;    # sets Expect default timeout, 0 accepts immediately
    my $testkeys_sent = 0;
    my $prompt1   = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2   = 'ssword:';
@@ -477,9 +469,9 @@ sub testkeys
 sub sendnodeskeys 

 {
-   my ($class,$remoteshell,$remotecopy,$to_userid,$to_userpassword,$home,$nodes, $expecttimeout) = @_;
+   my ($class,$remoteshell,$remotecopy,$to_userid,$to_userpassword,$home,$nodes) = @_;
    my $sendkeys;
-    my $timeout  = $expecttimeout;    # sets Expect default timeout, 0 accepts immediately
+    my $timeout  = 10;    # sets Expect default timeout, 0 accepts immediately
    my $sendkeys_sent = 0;
    my $prompt1   = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2   = 'ssword:';
@@ -498,15 +490,11 @@ sub sendnodeskeys
    #  in $HOME/.ssh/tmp/authorized_keys 
    #  copy to the node to the temp directory 
    #  scp $HOME/.ssh/tmp/authorized_keys to_userid@<node>:/tmp/$to_userid/.ssh
-    #  scp $HOME/.ssh/id_rsa.pub to_userid@<node>:/tmp/$to_userid/.ssh
-    #  Note if using zones,  the keys do not come from ~/.ssh but from the
-    #  zone table, sshkeydir attribute.  For zones the userid is always root
    #  If you are going to enable ssh to ssh between nodes, then
    #  scp $HOME/.ssh/id_rsa to that temp directory on the node
    #  copy the script $HOME/.ssh/copy.sh to the node, it will do the 
    #  the work of setting up the user's ssh keys  and clean up
    #  ssh (run)  copy.sh on the node
-    
    my @nodelist=split(/,/,$nodes);
    foreach my $node (@nodelist) {
      $sendkeys = new Expect;
@@ -614,11 +602,11 @@ sub sendnodeskeys
      my $spawncopyfiles;
      if ($ENV{'DSH_ENABLE_SSH'}) { # we will enable node to node ssh 
         $spawncopyfiles=
-        "$remotecopy $home/.ssh/id_rsa $home/.ssh/id_rsa.pub $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh "; 
+        "$remotecopy $home/.ssh/id_rsa $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh "; 
          
      } else {    # no node to node ssh ( don't send private key)
         $spawncopyfiles=
-        "$remotecopy $home/.ssh/id_rsa.pub $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh "; 
+        "$remotecopy $home/.ssh/copy.sh $home/.ssh/tmp/authorized_keys $to_userid\@$node:/tmp/$to_userid/.ssh "; 
      }
      # send copy command 
      unless ($sendkeys->spawn($spawncopyfiles))
@@ -771,7 +759,7 @@ sub sendnodeskeys

 =head3    senddeviceskeys 
 	
-      Setup the ssh keys on the switches 
+      Setup the ssh keys on the nodes 

 =cut

@@ -780,9 +768,9 @@ sub sendnodeskeys
 sub senddeviceskeys 

 {
-   my ($class,$remoteshell,$remotecopy,$to_userid,$to_userpassword,$home,$ssh_setup_cmd,$nodes, $expecttimeout) = @_;
+   my ($class,$remoteshell,$remotecopy,$to_userid,$to_userpassword,$home,$ssh_setup_cmd,$nodes) = @_;
    my $sendkeys;
-    my $timeout  = $expecttimeout;    # sets Expect default timeout, 0 accepts immediately
+    my $timeout  = 10;    # sets Expect default timeout, 0 accepts immediately
    my $sendkeys_sent = 0;
    my $prompt1   = 'Are you sure you want to continue connecting (yes/no)?';
    my $prompt2   = 'ssword:';
@@ -202,11 +202,9 @@ sub parse_and_run_sinv
    #
    my @nodelist  = ();
    my @cmdparts  = ();
-    my $devicecommand =0;
    if ($options{'devicetype'}) {  
      # must split different because devices have commands with spaces
      @cmdparts  = split(' ', $cmd,3);
-      $devicecommand =1;
    } else {
      @cmdparts  = split(' ', $cmd);
    }
@@ -505,7 +503,7 @@ sub parse_and_run_sinv
                   );

        #  write the results to the tempfile after running through xdshcoll
-        $rc = &storeresults($callback,$devicecommand);
+        $rc = &storeresults($callback);

    }
    $processflg = "node";
@@ -536,7 +534,7 @@ sub parse_and_run_sinv


    #  write the results to the tempfile after running through xdshcoll
-    $rc = &storeresults($callback,$devicecommand);
+    $rc = &storeresults($callback);

    #  Build report and write to output file
    #  if file exist and has something in it
@@ -1453,11 +1451,12 @@ sub rinvoutput
 sub storeresults
 {
    my $callback = shift;
-    my $devicecommand= shift;
+
    # open file to write results of xdsh or rinv command
    my $newtempfile = $tempfile;
    $newtempfile .= "temp";
-    unless (open(NEWTMPFILE, ">$newtempfile"))
+    open(FILE, ">$newtempfile");
+    if ($? > 0)
    {
        my $rsp = {};
        $rsp->{data}->[0] = "Could not open $newtempfile\n";
@@ -1466,9 +1465,9 @@ sub storeresults
    }
    foreach my $line (@cmdresult)
    {
-        print NEWTMPFILE $line;
+        print FILE $line;
    }
-    close NEWTMPFILE;
+    close FILE;
    my $outputfile;
    if ($processflg eq "seednode")
    {    # cmd to seednode
@@ -1480,7 +1479,8 @@ sub storeresults
    }

    # open  file to put results of xdshcoll
-    unless (open(NEWOUTFILE, ">$outputfile"))
+    open(FILE, ">$outputfile");
+    if ($? > 0)
    {
        my $rsp = {};
        $rsp->{data}->[0] = "Could not open $outputfile\n";
@@ -1489,7 +1489,8 @@ sub storeresults
    }
    my $cmd = " $::XCATROOT/sbin/xdshcoll <$newtempfile |";

-    unless (open(XCOLL, "$cmd"))
+    open(XCOLL, "$cmd");
+    if ($? > 0)
    {
        my $rsp = {};
        $rsp->{data}->[0] = "Could not call xdshcoll \n";
@@ -1502,37 +1503,18 @@ sub storeresults
    while (<XCOLL>)
    {
        $line = $_;
-        print NEWOUTFILE $line
+        print FILE $line

    }

    close(XCOLL);
-    close NEWOUTFILE;
+    close FILE;

    system("/bin/rm  $newtempfile");
-    # is device command, we get false errors from the Switch, check for  
-    # blank error output lines and remove them.  If there is nothing left
-    # then there really were no errors
-    my @newerrresult=();
-    my $processerrors =1;
-    if ($devicecommand==1) {
-        foreach my $line (@errresult)
-        {
-          my @newline =  (split(/:/, $line));
-          if ($newline[1] !~ /^\s*$/) { # Not blank, then save it 
-            push @newerrresult,$line;  
-          } 
-          
-        } 
-        my $arraysize=@newerrresult;
-        if ($arraysize < 1) {
-            $processerrors =0;
-        }
-    }

    # capture errors
    #
-    if ((@errresult) && ($processerrors ==1))
+    if (@errresult)
    {    # if errors
        my $rsp = {};
        my $i   = 0;
@@ -667,9 +667,6 @@ sub decode_spd {
        1066 => 8500,
        1333 => 10600,
        1600 => 12800,
-        1867 => 14900,
-        2133 => 17000,
-        2134 => 17000,
    );

    my %ddr3modcap = (
@@ -710,20 +707,9 @@ sub decode_spd {
    }
    $rethash->{product}->{name}=$memtypes{$spd[2]};
    if  ($spd[2] == 11) { #DDR3 spec applies
-        my $ftbdividend = $spd[9] >> 4;
-        my $ftbdivisor = $spd[9] & 0xf;
-        my $ftb = $ftbdividend/$ftbdivisor;
-        my $fineoffset = $spd[34];
-        if ($fineoffset & 0b10000000) {
-            #negative value, twos complement
-            $fineoffset = 0-(($fineoffset ^ 0xff) + 1);
-        }
-        $fineoffset = ($ftb * $fineoffset) * 10**-3;
        my $mtb = $spd[10]/$spd[11];
-        my $clock = int(2/(($mtb*$spd[12]+$fineoffset)*10**-3));
-        my $speed = $speedfromclock{$clock};
-        unless ($speed) { $speed = "UNKNOWN"; }
-        $rethash->{product}->{name}="PC3-".$speed." ($clock MT/s)";
+        my $speed = $speedfromclock{int(2/($mtb*$spd[12]*10**-3))};
+        $rethash->{product}->{name}="PC3-".$speed;
        if ($spd[8]&0b11000) {
            $rethash->{product}->{name} .= " ECC";
        }
@@ -134,7 +134,7 @@ litetree => {
 	table_desc => 'Directory hierarchy to traverse to get the initial contents of node files.  The files that are specified in the litefile table are searched for in the directories specified in this table.',        
 	descriptions => {
 		priority => 'This number controls what order the directories are searched.  Directories are searched from smallest priority number to largest.',
-        image => "The name of the image (as specified in the osimage table) that will use this directory. You can also specify an image group name that is listed in the osimage.groups attribute of some osimages. 'ALL' means use this row for all images.",
+		image => "The name of the image that will use this directory, as specified in the osimage table.  If image is not supplied, the default is 'ALL'. 'ALL' means use it for all images.",
 		directory => 'The location (hostname:path) of a directory that contains files specified in the litefile table.  Variables are allowed.  E.g: $noderes.nfsserver://xcatmasternode/install/$node/#CMD=uname-r#/',
 		mntopts => "A comma-separated list of options to use when mounting the litetree directory.  (Ex. 'soft') The default is to do a 'hard' mount.",
 		comments => 'Any user-written notes.',
@@ -148,7 +148,7 @@ litefile => {
 	required => [qw(image file)], # default type is rw nfsroot   
 	table_desc => 'The litefile table specifies the directories and files on the statelite nodes that should be readwrite, persistent, or readonly overlay.  All other files in the statelite nodes come from the readonly statelite image.',        
 	descriptions => {
-		image => "The name of the image (as specified in the osimage table) that will use these options on this dir/file. You can also specify an image group name that is listed in the osimage.groups attribute of some osimages. 'ALL' means use this row for all images.",
+		image => "The name of the image that will use these files, as specified in the osimage table. 'ALL' means use it for all images.",
 		file => "The full pathname of the file. e.g: /etc/hosts.  If the path is a directory, then it should be terminated with a '/'. ",
 		options => "Options for the file:\n\n".
            qq{ tmpfs - It is the default option if you leave the options column blank. It provides a file or directory for the node to use when booting, its permission will be the same as the original version on the server. In most cases, it is read-write; however, on the next statelite boot, the original version of the file or directory on the server will be used, it means it is non-persistent. This option can be performed on files and directories..\n\n}.
@@ -191,7 +191,7 @@ vmmaster => {
    }
 },
 vm => {
-    cols => [qw(node mgr host migrationdest storage storagemodel storagecache storageformat cfgstore memory cpus nics nicmodel bootorder clockoffset virtflags master vncport textconsole powerstate beacon datacenter cluster guestostype othersettings physlots vidmodel vidproto vidpassword comments disable)],
+    cols => [qw(node mgr host migrationdest storage storagemodel cfgstore memory cpus nics nicmodel bootorder clockoffset virtflags master vncport textconsole powerstate beacon datacenter cluster guestostype othersettings vidmodel vidproto vidpassword comments disable)],
    keys => [qw(node)],
    tablespace =>'XCATTBS32K',
    table_desc => 'Virtualization parameters',
@@ -200,7 +200,7 @@ vm => {
        'mgr' => 'The function manager for the virtual machine',
        'host' => 'The system that currently hosts the VM',
        'migrationdest' => 'A noderange representing candidate destinations for migration (i.e. similar systems, same SAN, or other criteria that xCAT can use',
-        'storage' => 'A list of storage files or devices to be used.  i.e. dir:///cluster/vm/<nodename> or nfs://<server>/path/to/folder/',
+        'storage' => 'A list of storage files or devices to be used.  i.e. /cluster/vm/<nodename> or nfs://<server>/path/to/folder/',
        'storagemodel' => 'Model of storage devices to provide to guest',
        'cfgstore' => 'Optional location for persistant storage separate of emulated hard drives for virtualization solutions that require persistant store to place configuration data',
        'memory' => 'Megabytes of memory the VM currently should be set to.',
@@ -222,17 +222,14 @@ vm => {
        'vncport' => 'Tracks the current VNC display port (currently not meant to be set',
        'textconsole' => 'Tracks the Psuedo-TTY that maps to the serial port or console of a VM',
        'powerstate' => "This flag is used by xCAT to track the last known power state of the VM.",
-        'othersettings' => "This allows specifying a semicolon delimited list of key->value pairs to include in a vmx file of VMware. For partitioning on normal power machines, this option is used to specify the hugepage and/or bsr information, the value is like:'hugepage:1,bsr=2'.",
+        'othersettings' => "This allows specifying a semicolon delimited list of key->value pairs to include in a vmx file of VMware.",
        'guestostype' => "This allows administrator to specify an identifier for OS to pass through to virtualization stack.  Normally this should be ignored as xCAT will translate from nodetype.os rather than requiring this field be used\n",
        'beacon' => "This flag is used by xCAT to track the state of the identify LED with respect to the VM.",
        'datacenter' => "Optionally specify a datacenter for the VM to exist in (only applicable to VMWare)",
        'cluster' => 'Specify to the underlying virtualization infrastructure a cluster membership for the hypervisor.',
 	'vidproto' => "Request a specific protocol for remote video access be set up.  For example, spice in KVM.",
-    'physlots' => "Specify the physical slots drc index that will assigned to the partition, the delimiter is ',', and the drc index must started with '0x'. For more details, please reference to manpage of 'lsvm'.",
 	'vidmodel' => "Model of video adapter to provide to guest.  For example, qxl in KVM",
 	'vidpassword' => "Password to use instead of temporary random tokens for VNC and SPICE access",
-    'storagecache' => "Select caching scheme to employ.  E.g. KVM understands 'none', 'writethrough' and 'writeback'",
-    'storageformat' => "Select disk format to use by default (e.g. raw versus qcow2)",
    }
 },
 hypervisor => {
@@ -267,7 +264,7 @@ virtsd => {
 },

 storage => {
-    cols => [qw(node osvolume size state storagepool hypervisor fcprange volumetag comments disable)],
+    cols => [qw(node osvolume size state storagepool fcprange volumetag comments disable)],
    keys => [qw(node)],
    table_descr => 'Node storage resources',
    descriptions => {
@@ -279,7 +276,6 @@ storage => {
        size => 'Size of the volume. Examples include: 10G, 1024M.',
        state => 'State of the volume. The valid values are: free, used, and allocated',
        storagepool => 'Name of storage pool where the volume is assigned.',
-        hypervisor => 'Name of the hypervisor where the volume is configured.',
        fcprange => 'A range of acceptable fibre channels that the volume can use. Examples include: 3B00-3C00;4B00-4C00.',
        volumetag => 'A specific tag used to identify the volume in the autoyast or kickstart template.',
        comments => 'Any user-written notes.',
@@ -538,8 +534,8 @@ nodehm => {
    table_desc => "Settings that control how each node's hardware is managed.  Typically, an additional table that is specific to the hardware type of the node contains additional info.  E.g. the ipmi, mp, and ppc tables.",
 descriptions => {
  node => 'The node name or group name.',
-  power => 'The method to use to control the power of the node. If not set, the mgt attribute will be used.  Valid values: ipmi, blade, hmc, ivm, fsp, kvm, esx, rhevm.  If "ipmi", xCAT will search for this node in the ipmi table for more info.  If "blade", xCAT will search for this node in the mp table.  If "hmc", "ivm", or "fsp", xCAT will search for this node in the ppc table.',
-  mgt => 'The method to use to do general hardware management of the node.  This attribute is used as the default if power or getmac is not set.  Valid values: ipmi, blade, hmc, ivm, fsp, bpa, kvm, esx, rhevm.  See the power attribute for more details.',
+  power => 'The method to use to control the power of the node. If not set, the mgt attribute will be used.  Valid values: ipmi, blade, hmc, ivm, fsp.  If "ipmi", xCAT will search for this node in the ipmi table for more info.  If "blade", xCAT will search for this node in the mp table.  If "hmc", "ivm", or "fsp", xCAT will search for this node in the ppc table.',
+  mgt => 'The method to use to do general hardware management of the node.  This attribute is used as the default if power or getmac is not set.  Valid values: ipmi, blade, hmc, ivm, fsp, bpa.  See the power attribute for more details.',
  cons => 'The console method. If nodehm.serialport is set, this will default to the nodehm.mgt setting, otherwise it defaults to unused.  Valid values: cyclades, mrv, or the values valid for the mgt attribute.',
  termserver => 'The hostname of the terminal server.',
  termport => 'The port number on the terminal server that this node is connected to.',
@@ -554,7 +550,7 @@ nodehm => {
 },
  },
 nodelist => {
-    cols => [qw(node groups status statustime appstatus appstatustime primarysn hidden updatestatus updatestatustime zonename comments disable)],
+    cols => [qw(node groups status statustime appstatus appstatustime primarysn hidden updatestatus updatestatustime comments disable)],
    keys => [qw(node)],
    tablespace =>'XCATTBS32K',
    table_desc => "The list of all the nodes in the cluster, including each node's current status and what groups it is in.",
@@ -567,9 +563,8 @@ nodelist => {
     appstatustime =>'The date and time when appstatus was updated.',
     primarysn => 'Not used currently. The primary servicenode, used by this node.',
     hidden => "Used to hide fsp and bpa definitions, 1 means not show them when running lsdef and nodels",
-     updatestatus => "The current node update status. Valid states are synced out-of-sync,syncing,failed.",
+     updatestatus => "The current node update status. Valid states are synced and out-of-sync.",
     updatestatustime => "The date and time when the updatestatus was updated.",
-     zonename => "The name of the zone to which the node is currently assigned. If undefined, then it is not assigned to any zone. ",
     comments => 'Any user-written notes.',
     disable => "Set to 'yes' or '1' to comment out this row.",
    },
@@ -592,14 +587,14 @@ nodepos => {
 },
  },
 noderes => {
-    cols => [qw(node servicenode netboot tftpserver tftpdir nfsserver monserver nfsdir installnic primarynic discoverynics cmdinterface xcatmaster current_osimage next_osimage nimserver routenames nameservers proxydhcp comments disable)],
+    cols => [qw(node servicenode netboot tftpserver tftpdir nfsserver monserver nfsdir installnic primarynic discoverynics cmdinterface xcatmaster current_osimage next_osimage nimserver routenames nameservers comments disable)],
    keys => [qw(node)],
    tablespace =>'XCATTBS16K',
    table_desc => 'Resources and settings to use when installing nodes.',
 descriptions => {
  node => 'The node name or group name.',
  servicenode => 'A comma separated list of node names (as known by the management node) that provides most services for this node. The first service node on the list that is accessible will be used.  The 2nd node on the list is generally considered to be the backup service node for this node when running commands like snmove.',
-  netboot => 'The type of network booting to use for this node.  Valid values:  pxe or xnba for x86* architecture, yaboot for POWER architecture, grub2 for RHEL7 on Power. Notice: yaboot is not supported from rhels7 on Power,use grub2 instead',
+  netboot => 'The type of network booting to use for this node.  Valid values:  pxe or xnba for x86* architecture, yaboot for POWER architecture.',
  tftpserver => 'The TFTP server for this node (as known by this node). If not set, it defaults to networks.tftpserver.',
  tftpdir => 'The directory that roots this nodes contents from a tftp and related perspective.  Used for NAS offload by using different mountpoints.',
  nfsserver => 'The NFS or HTTP server for this node (as known by this node).',
@@ -615,7 +610,6 @@ noderes => {
  nimserver => 'Not used for now. The NIM server for this node (as known by this node).',
  routenames => 'A comma separated list of route names that refer to rows in the routes table. These are the routes that should be defined on this node when it is deployed.',
  nameservers => 'An optional node/group specific override for name server list.  Most people want to stick to site or network defined nameserver configuration.',
-  proxydhcp => 'To specify whether the node supports proxydhcp protocol. Valid values: yes or 1, no or 0. Default value is yes.',
  comments => 'Any user-written notes.',
  disable => "Set to 'yes' or '1' to comment out this row.",
 },
@@ -682,7 +676,7 @@ osimage => {
  groups => 'A comma-delimited list of image groups of which this image is a member.  Image groups can be used in the litefile and litetree table instead of a single image name. Group names are arbitrary.',
  imagetype => 'The type of operating system image this definition represents (linux,AIX).',
  description => 'OS Image Description',
-  provmethod => 'The provisioning method for node deployment. The valid values are install, netboot,statelite,boottarget,dualboot,sysclone. If boottarget is set, you must set linuximage.boottarget to the name of the boottarget definition. It is not used by AIX.',
+  provmethod => 'The provisioning method for node deployment. The valid values are install, netboot,statelite,boottarget,dualboot. If boottarget is set, you must set linuximage.boottarget to the name of the boottarget definition. It is not used by AIX.',
  rootfstype => 'The filesystem type for the rootfs is used when the provmethod is statelite. The valid values are nfs or ramdisk. The default value is nfs',
  osdistroname => 'The name of the OS distro definition.  This attribute can be used to specify which OS distro to use, instead of using the osname,osvers,and osarch attributes.',
  osupdatename => 'A comma-separated list of OS distro updates to apply to this osimage.',
@@ -733,21 +727,6 @@ linuximage  => {
  disable => "Set to 'yes' or '1' to comment out this row.",
 },
  },
-winimage => {
- cols => [qw(imagename template installto partitionfile winpepath comments disable)],
- keys => [qw(imagename)],
- tablespace =>'XCATTBS32K',
- table_desc => 'Information about a Windows operating system image that can be used to deploy cluster nodes.',
- descriptions => {
-  imagename => 'The name of this xCAT OS image definition.',
-  template => 'The fully qualified name of the template file that is used to create the windows unattend.xml file for diskful installation.',
-  installto => 'The disk and partition that the Windows will be deployed to. The valid format is <disk>:<partition>. If not set, default value is 0:1 for bios boot mode(legacy) and 0:3 for uefi boot mode; If setting to 1, it means 1:1 for bios boot and 1:3 for uefi boot',
-  partitionfile => 'The path of partition configuration file. Since the partition configuration for bios boot mode and uefi boot mode are different, this configuration file should include two parts if customer wants to support both bios and uefi mode. If customer just wants to support one of the modes, specify one of them anyway. Example of partition configuration file: [BIOS]xxxxxxx[UEFI]yyyyyyy. To simplify the setting, you also can set installto in partitionfile with section likes [INSTALLTO]0:1',
-  winpepath => 'The path of winpe which will be used to boot this image. If the real path is /tftpboot/winboot/winpe1/, the value for winpepath should be set to winboot/winpe1',
-  comments => 'Any user-written notes.',
-  disable => "Set to 'yes' or '1' to comment out this row.",
- }
-},
 passwd => {
    cols => [qw(key username password cryptmethod authdomain comments disable)],
    keys => [qw(key username)],
@@ -769,10 +748,10 @@ policy => {
 descriptions => {
  priority => 'The priority value for this rule.  This value is used to identify this policy data object (i.e. this rule).',
  name => 'The username that is allowed to perform the commands specified by this rule.  Default is "*" (all users).',
-  host => 'The host from which users may issue the commands specified by this rule.  Default is "*" (all hosts). Only all or one host supported. ',
+  host => 'The host from which users may issue the commands specified by this rule.  Default is "*" (all hosts).',
  commands => 'The list of commands that this rule applies to.  Default is "*" (all commands).',
-  noderange => 'The Noderange that this rule applies to.  Default is "*" (all nodes). Not supported with the *def commands.',
-  parameters => 'A regular expression that matches the command parameters (everything except the noderange) that this rule applies to.  Default is "*" (all parameters). Not supported with the *def commands.',
+  noderange => 'The Noderange that this rule applies to.  Default is "*" (all nodes).',
+  parameters => 'A regular expression that matches the command parameters (everything except the noderange) that this rule applies to.  Default is "*" (all parameters).',
  time => 'Time ranges that this command may be executed in.  This is not supported.',
  rule => 'Specifies how this rule should be applied.  Valid values are: allow, accept, trusted. Allow or accept  will allow the user to run the commands. Any other value will deny the user access to the commands. Trusted means that once this client has been authenticated via the certificate, all other information that is sent (e.g. the username) is believed without question.  This authorization should only be given to the xcatd on the management node at this time.',
     comments => 'Any user-written notes.',
@@ -837,13 +816,12 @@ ppchcp => {
 },
  },
 servicenode => {
-    cols => [qw(node nameserver dhcpserver tftpserver nfsserver conserver monserver ldapserver ntpserver ftpserver nimserver ipforward dhcpinterfaces proxydhcp comments disable)],
+    cols => [qw(node nameserver dhcpserver tftpserver nfsserver conserver monserver ldapserver ntpserver ftpserver nimserver ipforward dhcpinterfaces comments disable)],
    keys => [qw(node)],
-    tablespace =>'XCATTBS16K',
    table_desc => 'List of all Service Nodes and services that will be set up on the Service Node.',
 descriptions => {
  node => 'The hostname of the service node as known by the Management Node.',
-  nameserver => 'Do we set up DNS on this service node? Valid values: 2, 1, no or 0. If 2, creates named.conf as dns slave, using the management node as dns master, and starts named. If 1, creates named.conf file with forwarding to the management node and starts named. If no or 0, it does not change the current state of the service. ',
+  nameserver => 'Do we set up DNS on this service node? Valid values:yes or 1, no or 0. If yes, creates named.conf file with forwarding to the management node and starts named. If no or 0, it does not change the current state of the service. ',
  dhcpserver => 'Do we set up DHCP on this service node? Not supported on AIX. Valid values:yes or 1, no or 0. If yes, runs makedhcp -n. If no or 0, it does not change the current state of the service. ',
  tftpserver => 'Do we set up TFTP on this service node? Not supported on AIX. Valid values:yes or 1, no or 0. If yes, configures and starts atftp. If no or 0, it does not change the current state of the service. ',
  nfsserver => 'Do we set up file services (HTTP,FTP,or NFS) on this service node? For AIX will only setup NFS, not HTTP or FTP. Valid values:yes or 1, no or 0.If no or 0, it does not change the current state of the service. ',
@@ -855,7 +833,6 @@ servicenode => {
  nimserver => 'Not used. Do we set up a NIM server on this service node? Valid values:yes or 1, no or 0. If no or 0, it does not change the current state of the service.',
  ipforward => 'Do we set up ip forwarding on this service node? Valid values:yes or 1, no or 0. If no or 0, it does not change the current state of the service.',
  dhcpinterfaces => 'The network interfaces DHCP server should listen on for the target node. This attribute can be used for management node and service nodes.  If defined, it will override the values defined in site.dhcpinterfaces. This is a comma separated list of device names. !remote! indicates a non-local network for relay DHCP. For example: !remote!,eth0,eth1',
-  proxydhcp => 'Do we set up proxydhcp service on this node? valid values: yes or 1, no or 0. If yes, the proxydhcp daemon will be enabled on this node.',

     comments => 'Any user-written notes.',
     disable => "Set to 'yes' or '1' to comment out this row.",
@@ -864,44 +841,35 @@ servicenode => {
 site => {
    cols => [qw(key value comments disable)],
    keys => [qw(key)],
-    table_desc => "Global settings for the whole cluster.  This table is different from the \nother tables in that each attribute is just named in the key column, rather \nthan having a separate column for each attribute. The following is a list of \nattributes currently used by xCAT organized into categories.\n",
+    table_desc => "Global settings for the whole cluster.  This table is different from the \nother tables in that each attribute is just named in the key column, rather \nthan having a separate column for each attribute. The following is a list of \nthe attributes currently used by xCAT.\n",
 descriptions => {
  # Do not put description text past column 88, so it displays well in a 100 char wide window.
  # ----------------------------------------------------------------------------------|----------
  key => "Attribute Name:  Description\n\n".
-   " ------------\n".
-   "AIX ATTRIBUTES\n".
-   " ------------\n".
-   " nimprime :   The name of NIM server, if not set default is the AIX MN.
-              If Linux MN, then must be set for support of mixed cluster (TBD).\n\n".
-   " useSSHonAIX:  (yes/1 or no/0). Default is yes.  The support for rsh/rcp is deprecated.\n".
-   " useNFSv4onAIX:  (yes/1 or no/0). If yes, NFSv4 will be used with NIM. If no,\n".
-   "               NFSv3 will be used with NIM. Default is no.\n\n".
-   " -----------------\n".
-   "DATABASE ATTRIBUTES\n".
-   " -----------------\n".
-   " auditskipcmds: List of commands and/or client types that will not be\n".
-   "                written to the auditlog table.\n".
+   " auditskipcmds: List of commands and/or client types that will not be written to the auditlog table.\n".
   "                'ALL' means all cmds will be skipped. If attribute is null, all\n".
   "                commands will be written.\n". 
   "                clienttype:web would skip all commands from the web client\n". 
   "                For example: tabdump,nodels,clienttype:web \n".
   "                will not log tabdump,nodels and any web client commands.\n\n".
+   " blademaxp:  The maximum number of concurrent processes for blade hardware control.\n\n".
+   " cleanupxcatpost:  (yes/1 or no/0). Set to 'yes' or '1' to clean up the /xcatpost\n".
+   "                   directory on the stateless and statelite nodes after the\n".
+   "                   postscripts are run. Default is no.\n\n".
+   " consoleondemand:  When set to 'yes', conserver connects and creates the console\n".
+   "                   output only when the user opens the console. Default is no on\n".
+   "                   Linux, yes on AIX.\n\n".
   " databaseloc:    Directory where we create the db instance directory.\n".
   "                 Default is /var/lib. Only DB2 is currently supported.\n".
   "                 Do not use the directory in the site.installloc or\n".
   "                 installdir attribute. This attribute must not be changed\n".
   "                 once db2sqlsetup script has been run and DB2 has been setup.\n\n".
-   " excludenodes:  A set of comma separated nodes and/or groups that would automatically\n".
-   "                be subtracted from any noderange, it can be used for excluding some\n".
-   "                failed nodes for any xCAT commands. See the 'noderange' manpage for\n".
-   "                details on supported formats.\n\n".
-   " nodestatus:  If set to 'n', the nodelist.status column will not be updated during\n".
-   "              the node deployment, node discovery and power operations. The default is to update.\n\n".
-   " skiptables:  Comma separated list of tables to be skipped by dumpxCATdb\n\n".
-   " -------------\n".
-   "DHCP ATTRIBUTES\n".
-   " -------------\n".
+   " db2installloc:  The location which the service nodes should mount for\n".
+   "                 the db2 code to install. Format is hostname:/path.  If hostname is\n".
+   "                 omitted, it defaults to the management node. Default is /mntdb2.\n\n".
+   " defserialflow:  The default serial flow - currently only used by the mknb command.\n\n".
+   " defserialport:  The default serial port - currently only used by mknb.\n\n".
+   " defserialspeed:  The default serial speed - currently only used by mknb.\n\n".
   " dhcpinterfaces:  The network interfaces DHCP should listen on.  If it is the same\n".
   "                  for all nodes, use a simple comma-separated list of NICs.  To\n".
   "                  specify different NICs for different nodes:\n".
@@ -914,24 +882,59 @@ site => {
   " disjointdhcps:  If set to '1', the .leases file on a service node only contains\n".
   "                 the nodes it manages. The default value is '0'.\n".
   "                 '0' value means include all the nodes in the subnet.\n\n".
-   " pruneservices:  Whether to enable service pruning when noderm is run (i.e.\n".
-   "                 removing DHCP entries when noderm is executed)\n\n".
-   " managedaddressmode: The mode of networking configuration during node provision.\n".
-   "                     If set to 'static', the network configuration will be configured \n".
-   "                     in static mode based on the node and network definition on MN.\n".
-   "                     If set to 'dhcp', the network will be configured with dhcp protocol.\n".
-   "                     The default is 'dhcp'.\n\n".
-   " ------------\n".
-   "DNS ATTRIBUTES\n".
-   " ------------\n".
   " dnshandler:  Name of plugin that handles DNS setup for makedns.\n".
   " domain:  The DNS domain name used for the cluster.\n\n".
+   " ea_primary_hmc:  The hostname of the HMC that the Integrated Switch Network\n".
+   "                  Management Event Analysis should send hardware serviceable\n".
+   "                  events to for processing and potentially sending to IBM.\n\n".
+   " ea_backup_hmc:  The hostname of the HMC that the Integrated Switch Network\n".
+   "                  Management Event Analysis should send hardware serviceable\n".
+   "                  events to if the primary HMC is down.\n\n".
+   " enableASMI:  (yes/1 or no/0). If yes, ASMI method will be used after fsp-api. If no,\n".
+   "               when fsp-api is used, ASMI method will not be used. Default is no.\n\n".
+   " excludenodes:  A set of comma separated nodes and/or groups that would automatically\n".
+   "                be subtracted from any noderange, it can be used for excluding some\n".
+   "                failed nodes for any xCAT commands. See the 'noderange' manpage for\n".
+   "                details on supported formats.\n\n".
   " forwarders:  The DNS servers at your site that can provide names outside of the\n".
   "              cluster. The makedns command will configure the DNS on the management\n".
   "              node to forward requests it does not know to these servers.\n".
   "              Note that the DNS servers on the service nodes will ignore this value\n".
   "              and always be configured to forward requests to the management node.\n\n".
+   " fsptimeout:  The timeout, in milliseconds, to use when communicating with FSPs.\n\n".
+   " genmacprefix:  When generating mac addresses automatically, use this manufacturing\n".
+   "                prefix (e.g. 00:11:aa)\n\n".
+   " genpasswords:  Automatically generate random passwords for BMCs when configuring\n".
+   "                them.\n\n".
+   " httpport:    The port number that the booting/installing nodes should contact the\n".
+   "              http server on the MN/SN on. It is your responsibility to configure\n".
+   "              the http server to listen on that port - xCAT will not do that.\n\n".
+   " installdir:  The local directory name used to hold the node deployment packages.\n\n".
+   " installloc:  The location from which the service nodes should mount the \n".
+   "              deployment packages in the format hostname:/path.  If hostname is\n".
+   "              omitted, it defaults to the management node. The path must\n".
+   "              match the path in the installdir attribute.\n\n".
+   " ipmidispatch:  Whether or not to send ipmi hw control operations to the service\n".
+   "                node of the target compute nodes. Default is 'y'.\n\n".
+   " hwctrldispatch:  Whether or not to send hw control operations to the service\n".
+   "                  node of the target nodes. Default is 'y'.(At present, this attribute\n".
+   "                  is only used for IBM Flex System)\n\n".
+   " ipmimaxp:  The max # of processes for ipmi hw ctrl. The default is 64. Currently,\n".
+   "            this is only used for HP hw control.\n\n".
+   " ipmiretries:  The # of retries to use when communicating with BMCs. Default is 3.\n\n".
+   " ipmisdrcache:  If set to 'no', then the xCAT IPMI support will not cache locally\n".
+   "                the target node's SDR cache to improve performance.\n\n".
+   " ipmitimeout:  The timeout to use when communicating with BMCs. Default is 2.\n".
+   "               This attribute is currently not used.\n\n".
+   " iscsidir:  The path to put the iscsi disks in on the mgmt node.\n\n".
   " master:  The hostname of the xCAT management node, as known by the nodes.\n\n".
+   " maxssh:  The max # of SSH connections at any one time to the hw ctrl point for PPC\n".
+   "          This parameter doesn't take effect on the rpower command.\n".
+   "          It takes effects on other PPC hardware control command\n".
+   "          getmacs/rnetboot/rbootseq and so on. Default is 8.\n\n".
+   " mnroutenames:  The name of the routes to be setup on the management node.\n".
+   "                It is a comma separated list of route names that are defined in the\n".
+   "                routes table.\n\n".
   " nameservers:  A comma delimited list of DNS servers that each node in the cluster\n".
   "               should use. This value will end up in the nameserver settings of the\n".
   "               /etc/resolv.conf on each node. It is common (but not required) to set\n".
@@ -941,41 +944,18 @@ site => {
   "               \"<xcatmaster>\" to mean the DNS server for each node should be the\n".
   "               node that is managing it (either its service node or the management\n".
   "               node).\n\n".
-   " externaldns:  To specify that external dns is used. If externaldns is set to any value\n".
-   "               then, makedns command will not start the local nameserver on xCAT MN. \n".
-   "               Default is to start the local nameserver.\n\n".
-   " dnsupdaters:  The value are \',\' separated string which will be added to the zone config\n".
-   "               section. This is an interface for user to add configuration entries to\n". 
-   "               the zone sections in named.conf.\n\n".
-   " -------------------------\n".
-   "HARDWARE CONTROL ATTRIBUTES\n".
-   " -------------------------\n".
-   " blademaxp:  The maximum number of concurrent processes for blade hardware control.\n\n".
-   " ea_primary_hmc:  The hostname of the HMC that the Integrated Switch Network\n".
-   "                  Management Event Analysis should send hardware serviceable\n".
-   "                  events to for processing and potentially sending to IBM.\n\n".
-   " ea_backup_hmc:  The hostname of the HMC that the Integrated Switch Network\n".
-   "                  Management Event Analysis should send hardware serviceable\n".
-   "                  events to if the primary HMC is down.\n\n".
-   " enableASMI:  (yes/1 or no/0). If yes, ASMI method will be used after fsp-api. If no,\n".
-   "               when fsp-api is used, ASMI method will not be used. Default is no.\n\n".
-   " fsptimeout:  The timeout, in milliseconds, to use when communicating with FSPs.\n\n".
-   " hwctrldispatch:  Whether or not to send hw control operations to the service\n".
-   "                  node of the target nodes. Default is 'y'.(At present, this attribute\n".
-   "                  is only used for IBM Flex System)\n\n".
-   " ipmidispatch:  Whether or not to send ipmi hw control operations to the service\n".
-   "                node of the target compute nodes. Default is 'y'.\n\n".
-   " ipmimaxp:  The max # of processes for ipmi hw ctrl. The default is 64. Currently,\n".
-   "            this is only used for HP hw control.\n\n".
-   " ipmiretries:  The # of retries to use when communicating with BMCs. Default is 3.\n\n".
-   " ipmisdrcache:  If set to 'no', then the xCAT IPMI support will not cache locally\n".
-   "                the target node's SDR cache to improve performance.\n\n".
-   " ipmitimeout:  The timeout to use when communicating with BMCs. Default is 2.\n".
-   "               This attribute is currently not used.\n\n".
-   " maxssh:  The max # of SSH connections at any one time to the hw ctrl point for PPC\n".
-   "          This parameter doesn't take effect on the rpower command.\n".
-   "          It takes effects on other PPC hardware control command\n".
-   "          getmacs/rnetboot/rbootseq and so on. Default is 8.\n\n".
+   " nimprime :   The name of NIM server, if not set default is the AIX MN.
+              If Linux MN, then must be set for support of mixed cluster (TBD).\n\n".
+   " nodestatus:  If set to 'n', the nodelist.status column will not be updated during\n".
+   "              the node deployment, node discovery and power operations. The default is to update.\n\n".
+   " ntpservers:  A comma delimited list of NTP servers for the cluster - often the\n".
+   "              xCAT management node.\n\n".
+   " runbootscripts:  If set to 'yes' the scripts listed in the postbootscripts\n".
+   "                  attribute in the osimage and postscripts tables will be run during\n".
+   "                  each reboot of stateful (diskful) nodes. This attribute has no\n".
+   "                  effect on stateless and statelite nodes. Please run the following\n" .
+   "                  command after you change the value of this attribute: \n".
+   "                  'updatenode <nodes> -P setuppostbootscripts'\n\n".
   " syspowerinterval:  For system p CECs, this is the number of seconds the rpower\n".
   "                 command will wait between performing the action for each CEC.\n".
   "                 For system x IPMI servers, this is the number of seconds the\n".
@@ -1002,45 +982,15 @@ site => {
   " ppctimeout:  The timeout, in milliseconds, to use when communicating with PPC hw\n".
   "              through HMC. It only takes effect on the hardware control commands\n".
   "              through HMC. Default is 0.\n\n".
-   " snmpc:  The snmp community string that xcat should use when communicating with the\n".
-   "         switches.\n\n".
-   " ---------------------------\n".
-   "INSTALL/DEPLOYMENT ATTRIBUTES\n".
-   " ---------------------------\n".
-   " cleanupxcatpost:  (yes/1 or no/0). Set to 'yes' or '1' to clean up the /xcatpost\n".
-   "                   directory on the stateless and statelite nodes after the\n".
-   "                   postscripts are run. Default is no.\n\n".
-   " db2installloc:  The location which the service nodes should mount for\n".
-   "                 the db2 code to install. Format is hostname:/path.  If hostname is\n".
-   "                 omitted, it defaults to the management node. Default is /mntdb2.\n\n".
-   " defserialflow:  The default serial flow - currently only used by the mknb command.\n\n".
-   " defserialport:  The default serial port - currently only used by mknb.\n\n".
-   " defserialspeed:  The default serial speed - currently only used by mknb.\n\n".
-   " genmacprefix:  When generating mac addresses automatically, use this manufacturing\n".
-   "                prefix (e.g. 00:11:aa)\n\n".
-   " genpasswords:  Automatically generate random passwords for BMCs when configuring\n".
-   "                them.\n\n".
-   " installdir:  The local directory name used to hold the node deployment packages.\n\n".
-   " installloc:  The location from which the service nodes should mount the \n".
-   "              deployment packages in the format hostname:/path.  If hostname is\n".
-   "              omitted, it defaults to the management node. The path must\n".
-   "              match the path in the installdir attribute.\n\n".
-   " iscsidir:  The path to put the iscsi disks in on the mgmt node.\n\n".
-   " mnroutenames:  The name of the routes to be setup on the management node.\n".
-   "                It is a comma separated list of route names that are defined in the\n".
-   "                routes table.\n\n".
-   " runbootscripts:  If set to 'yes' the scripts listed in the postbootscripts\n".
-   "                  attribute in the osimage and postscripts tables will be run during\n".
-   "                  each reboot of stateful (diskful) nodes. This attribute has no\n".
-   "                  effect on stateless and statelite nodes. Please run the following\n" .
-   "                  command after you change the value of this attribute: \n".
-   "                  'updatenode <nodes> -P setuppostbootscripts'\n\n".
-   " precreatemypostscripts: (yes/1 or no/0). Default is no. If yes, it will  \n".
+   " precreatemypostscripts: (yes/1 or no/0, only for Linux).Default is no. If yes, it will  \n".
   "              instruct xCAT at nodeset and updatenode time to query the db once for\n".
   "              all of the nodes passed into the cmd and create the mypostscript file\n".
   "              for each node, and put them in a directory of tftpdir(such as: /tftpboot)\n".
   "              If no, it will not generate the mypostscript file in the tftpdir.\n\n".
-   " setinstallnic:  Set the network configuration for installnic to be static.\n\n".
+   " pruneservices:  Whether to enable service pruning when noderm is run (i.e.\n".
+   "                 removing DHCP entries when noderm is executed)\n\n".
+   " rsh:  This is no longer used. path to remote shell command for xdsh.\n\n".
+   " rcp:  This is no longer used. path to remote copy command for xdcp.\n\n".
   " sharedtftp:  Set to 0 or no, xCAT should not assume the directory\n".
   "              in tftpdir is mounted on all on Service Nodes. Default is 1/yes.\n". 
   "              If value is set to a hostname, the directory in tftpdir\n".
@@ -1051,31 +1001,18 @@ site => {
   "               shared filesystem is being used across all service nodes.\n".
   "               'all' means that the management as well as the service nodes\n".
   "               are all using a common shared filesystem. The default is 'no'.\n".
-   " xcatconfdir:  Where xCAT config data is (default /etc/xcat).\n\n".
-   " --------------------\n".
-   "REMOTESHELL ATTRIBUTES\n".
-   " --------------------\n".
-   " nodesyncfiledir:  The directory on the node, where xdcp will rsync the files\n".
+   " skiptables:  Comma separated list of tables to be skipped by dumpxCATdb\n".
   " SNsyncfiledir:  The directory on the Service Node, where xdcp will rsync the files\n".
   "                 from the MN that will eventually be rsync'd to the compute nodes.\n\n".
-   " sshbetweennodes:  Comma separated list of groups of compute nodes to enable passwordless root \n".
+   " nodesyncfiledir:  The directory on the node, where xdcp will rsync the files\n".
+   " snmpc:  The snmp community string that xcat should use when communicating with the\n".
+   "         switches.\n\n".
+   " sshbetweennodes:  Comma separated list of groups to enable passwordless root \n".
   "                   ssh during install, or xdsh -K. Default is ALLGROUPS.\n".
-   "                   Set to NOGROUPS,if you do not wish to enabled any group of compute nodes.\n".
+   "                   Set to NOGROUPS,if you do not wish to enabled any groups.\n".
   "                   Service Nodes are not affected by this attribute\n".
   "                   they are always setup with\n".
-   "                   passwordless root access to nodes and other SN.\n".
-   "                   If using the zone table, this attribute in not used.\n\n".
-   " -----------------\n".
-   "SERVICES ATTRIBUTES\n".
-   " -----------------\n".
-   " consoleondemand:  When set to 'yes', conserver connects and creates the console\n".
-   "                   output only when the user opens the console. Default is no on\n".
-   "                   Linux, yes on AIX.\n\n".
-   " httpport:    The port number that the booting/installing nodes should contact the\n".
-   "              http server on the MN/SN on. It is your responsibility to configure\n".
-   "              the http server to listen on that port - xCAT will not do that.\n\n".
-   " ntpservers:  A comma delimited list of NTP servers for the cluster - often the\n".
-   "              xCAT management node.\n\n".
+   "                   passwordless root access to nodes and other SN.\n\n".
   " svloglocal:  if set to 1, syslog on the service node will not get forwarded to the\n".
   "              mgmt node.\n\n".
   " timezone:  (e.g. America/New_York)\n\n".
@@ -1085,48 +1022,31 @@ site => {
   " useNmapfromMN:  When set to yes, nodestat command should obtain the node status\n".
   "                 using nmap (if available) from the management node instead of the\n".
   "                 service node. This will improve the performance in a flat network.\n\n".
-   " vsftp:       Default is 'n'. If set to 'y', the xcatd on the mn will automatically\n".
-   "              bring up vsftpd.  (You must manually install vsftpd before this.\n".
-   "              This setting does not apply to the service node. For sn\n".
-   "              you need to set servicenode.ftpserver=1 if you want xcatd to\n".
-   "              bring up vsftpd.\n\n".
-   " -----------------------\n".
-   "VIRTUALIZATION ATTRIBUTES\n".
-   " -----------------------\n".
+   " useSSHonAIX:  (yes/1 or no/0). If yes, ssh/scp will be setup and used. If no,\n".
   " usexhrm:  Have xCAT run its xHRM script when booting up KVM guests to set the\n".
   "           virtual network bridge up correctly. See\n".
   "           https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_Virtualization_with_KVM#Setting_up_a_network_bridge\n\n".
+   "               rsh/rcp will be setup and used on AIX. Default is yes.\n\n".
+   " useNFSv4onAIX:  (yes/1 or no/0). If yes, NFSv4 will be used with NIM. If no,\n".
+   "               NFSv3 will be used with NIM. Default is no.\n\n".
   " vcenterautojoin:  When set to no, the VMWare plugin will not attempt to auto remove\n".
   "                   and add hypervisors while trying to perform operations.  If users\n".
   "                   or tasks outside of xCAT perform the joining this assures xCAT\n".
   "                   will not interfere.\n\n".
   " vmwarereconfigonpower:  When set to no, the VMWare plugin will make no effort to\n".
   "                         push vm.cpus/vm.memory updates from xCAT to VMWare.\n\n".
-   " persistkvmguests:  Keep the kvm definition on the kvm hypervisor when you power off\n".
-   "                    the kvm guest node. This is useful for you to manually change the \n".
-   "                    kvm xml definition file in virsh for debugging. Set anything means\n".
-   "                    enable.\n\n".
-   " --------------------\n".
-   "XCAT DAEMON ATTRIBUTES\n".
-   " --------------------\n".
-   " useflowcontrol:  (yes/1 or no/0). If yes, the postscript processing on each node\n".
-   "               contacts xcatd on the MN/SN using a lightweight UDP packet to wait\n".
-   "               until xcatd is ready to handle the requests associated with\n".
-   "               postscripts.  This prevents deploying nodes from flooding xcatd and\n".
-   "               locking out admin interactive use. This value works with the\n".
-   "               xcatmaxconnections and xcatmaxbatch attributes. Is not supported on AIX.\n".
-   "               If the value is no, nodes sleep for a random time before contacting\n".
-   "               xcatd, and retry. On a new install of xcat, this value will be set to yes.\n".
-   "               See the following document for details:\n".
-   "               https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Hints_and_Tips_for_Large_Scale_Clusters\n\n".
+   " vsftp:       Default is 'n'. If set to 'y', the xcatd on the mn will automatically\n".
+   "              bring up vsftpd.  (You must manually install vsftpd before this.\n".
+   "              This setting does not apply to the service node. For sn\n".
+   "              you need to set servicenode.ftpserver=1 if you want xcatd to\n".
+   "              bring up vsftpd.\n\n".
+   " xcatconfdir:  Where xCAT config data is (default /etc/xcat).\n\n".
   " xcatmaxconnections:  Number of concurrent xCAT protocol requests before requests\n".
   "                      begin queueing. This applies to both client command requests\n".
   "                      and node requests, e.g. to get postscripts. Default is 64.\n\n".
-   " xcatmaxbatchconnections:  Number of concurrent xCAT connections allowed from the nodes.\n".
-   "                      Value must be less than xcatmaxconnections. Default is 50.\n\n".
   " xcatdport:  The port used by the xcatd daemon for client/server communication.\n\n".
-   " xcatiport:  The port used by xcatd to receive install status updates from nodes.\n\n".
-   " xcatsslversion:  The ssl version by xcatd. Default is SSLv3.\n\n".
+   " xcatiport:  The port used by xcatd to receive install status updates from nodes.\n\n",
+   " xcatsslversion:  The ssl version by xcatd. Default is SSLv3.\n\n",
   " xcatsslciphers:  The ssl cipher by xcatd. Default is 3DES.\n\n",
  value => 'The value of the attribute specified in the "key" column.',
     comments => 'Any user-written notes.',
@@ -1206,19 +1126,6 @@ performance => {
   disable => "Set to 'yes' or '1' to comment out this row.",
 },
  },
-zone => {
-    cols => [qw(zonename sshkeydir sshbetweennodes defaultzone comments disable)],
-    keys => [qw(zonename)],
-    table_desc => 'Defines a cluster zone for nodes that share root ssh key access to each other.',
- descriptions => {
-   zonename => 'The name of the zone.',
-   sshkeydir => 'Directory containing the shared root ssh RSA keys.',
-   sshbetweennodes => 'Indicates whether passwordless ssh will be setup between the nodes of this zone. Values are yes/1 or no/0. Default is yes. ',
-   defaultzone => 'If nodes are not assigned to any other zone, they will default to this zone. If value is set to yes or 1.',
-   comments => 'Any user-provided notes.',
-   disable => "Set to 'yes' or '1' to comment out this row.",
- },
-  },

 eventlog => {
    cols => [qw(recid  eventtime eventtype monitor monnode node application component id severity  message rawdata comments disable)], 
@@ -1355,7 +1262,7 @@ firmware => {
 },

 nics => {
-        cols => [qw(node nicips  nichostnamesuffixes nichostnameprefixes nictypes niccustomscripts nicnetworks nicaliases comments disable)], 
+        cols => [qw(node nicips  nichostnamesuffixes nictypes niccustomscripts nicnetworks nicaliases comments disable)], 
        keys => [qw(node)],
        tablespace =>'XCATTBS16K',
        table_desc => 'Stores NIC details.',
@@ -1373,13 +1280,6 @@ nics => {
                            <nic1>!<ext1>|<ext2>,<nic2>!<ext1>|<ext2>,..., for example,  eth0!-eth0|-eth0-ipv6,ib0!-ib0|-ib0-ipv6. 
                        The xCAT object definition commands support to use nichostnamesuffixes.<nicname> as the sub attributes. 
                        Note:  According to DNS rules a hostname must be a text string up to 24 characters drawn from the alphabet (A-Z), digits (0-9), minus sign (-),and period (.). When you are specifying "nichostnamesuffixes" or "nicaliases" make sure the resulting hostnames will conform to this naming convention',
-            nichostnameprefixes  => 'Comma-separated list of hostname prefixes per NIC. 
-                        If only one ip address is associated with each NIC:
-                            <nic1>!<ext1>,<nic2>!<ext2>,..., for example, eth0!eth0-,ib0!ib-
-                        If multiple ip addresses are associcated with each NIC:
-                            <nic1>!<ext1>|<ext2>,<nic2>!<ext1>|<ext2>,..., for example,  eth0!eth0-|eth0-ipv6i-,ib0!ib-|ib-ipv6-. 
-                        The xCAT object definition commands support to use nichostnameprefixes.<nicname> as the sub attributes. 
-                        Note:  According to DNS rules a hostname must be a text string up to 24 characters drawn from the alphabet (A-Z), digits (0-9), minus sign (-),and period (.). When you are specifying "nichostnameprefixes" or "nicaliases" make sure the resulting hostnames will conform to this naming convention',
            nictypes => 'Comma-separated list of NIC types per NIC. <nic1>!<type1>,<nic2>!<type2>, e.g. eth0!Ethernet,ib0!Infiniband. The xCAT object definition commands support to use nictypes.<nicname> as the sub attributes.', 
            niccustomscripts => 'Comma-separated list of custom scripts per NIC.  <nic1>!<script1>,<nic2>!<script2>, e.g. eth0!configeth eth0, ib0!configib ib0. The xCAT object definition commands support to use niccustomscripts.<nicname> as the sub attribute
 .',
@@ -1475,7 +1375,7 @@ kitrepo => {
        },
 },
 kitcomponent => {
-        cols => [qw(kitcompname description kitname kitreponame basename version release serverroles kitpkgdeps prerequisite driverpacks kitcompdeps postbootscripts genimage_postinstall exlist comments disable)], 
+        cols => [qw(kitcompname description kitname kitreponame basename version release serverroles kitpkgdeps driverpacks kitcompdeps postbootscripts genimage_postinstall exlist comments disable)], 
        keys => [qw(kitcompname)],
        tablespace =>'XCATTBS16K',
        table_desc => 'This table stores all kit components added to the xCAT cluster.',
@@ -1489,7 +1389,6 @@ kitcomponent => {
            release => 'Kit Component release.',
            serverroles => 'The types of servers that this Kit Component can install on.  Valid types are: mgtnode, servicenode, compute',
            kitpkgdeps => 'Comma-separated list of packages that this kit component depends on.',
-            prerequisite => 'Prerequisite for this kit component, the prerequisite includes ospkgdeps,preinstall,preupgrade,preuninstall scripts',
            driverpacks => 'Comma-separated List of driver package names. These must be full names like: pkg1-1.0-1.x86_64.rpm.',
            kitcompdeps  => 'Comma-separated list of kit components that this kit component depends on.',
            postbootscripts  => 'Comma-separated list of postbootscripts that will run during the node boot.',
@@ -1534,62 +1433,7 @@ discoverydata => {
       disable => "Set to 'yes' or '1' to comment out this row.",
   },
 },
-cfgmgt => {
-   cols => [qw(node cfgmgr cfgserver roles comments disable)],
-   keys => [qw(node)],
-   table_desc => 'Configuration management data for nodes used by non-xCAT osimage management services to install and configure software on a node.  ',
-   descriptions => {
-       node => 'The node being managed by the cfgmgr service',
-       cfgmgr => 'The name of the configuration manager service.  Currently \'chef\' and \'puppet\' are supported services.',
-       cfgserver => 'The xCAT node name of the chef server or puppet master',
-       roles => 'The roles associated with this node as recognized by the cfgmgr for the software that is to be installed and configured.  These role names map to chef recipes or puppet manifest classes that should be used for this node.  For example, chef OpenStack cookbooks have roles such as mysql-master,keystone, glance, nova-controller, nova-conductor, cinder-all.  ',
-       comments => 'Any user-written notes.',
-       disable => "Set to 'yes' or '1' to comment out this row.",
-   },
-},
-mic => {
-    cols => [qw(node host id nodetype bridge onboot vlog powermgt comments disable)],
-    keys => [qw(node)],
-    table_desc => 'The host, slot id and configuraton of the mic (Many Integrated Core).',
-    descriptions => {
-        node => 'The node name or group name.',
-        host => 'The host node which the mic card installed on.',
-        id => 'The device id of the mic node.',
-        nodetype => 'The hardware type of the mic node. Generally, it is mic.',
-        bridge => 'The virtual bridge on the host node which the mic connected to.',
-        onboot => 'Set mic to autoboot when mpss start. Valid values: yes|no. Default is yes.',
-        vlog => 'Set the Verbose Log to console. Valid values: yes|no. Default is no.',
-        powermgt => 'Set the Power Management for mic node. This attribute is used to set the power management state that mic may get into when it is idle. Four states can be set: cpufreq, corec6, pc3 and pc6. The valid value for powermgt attribute should be [cpufreq=<on|off>]![corec6=<on|off>]![pc3=<on|off>]![pc6=<on|off>]. e.g. cpufreq=on!corec6=off!pc3=on!pc6=off. Refer to the doc of mic to get more information for power management.',
-        comments => 'Any user-provided notes.',
-        disable => "Do not use.  tabprune will not work if set to yes or 1",
-    },
-},
-hwinv => {
-    cols => [qw(node cputype cpucount memory disksize comments disable)],
-    keys => [qw(node)],
-    table_desc => 'The hardware inventory for the node.',
-    descriptions => {
-        node => 'The node name or group name.',
-        cputype => 'The cpu model name for the node.',
-        cpucount => 'The number of cpus for the node.',
-        memory => 'The size of the memory for the node in MB.',
-        disksize => 'The size of the disks for the node in GB.',
-        comments => 'Any user-provided notes.',
-        disable =>  "Set to 'yes' or '1' to comment out this row.",
-    },
-},
-token => {
-    cols => [qw(tokenid username expire comments disable)],
-    keys => [qw(tokenid)],
-    table_desc => 'The token of users for authentication.',
-    descriptions => {
-        tokenid => 'It is a UUID as an unified identify for the user.',
-        username => 'The user name.',
-        expire => 'The expire time for this token.',
-        comments => 'Any user-provided notes.',
-        disable =>  "Set to 'yes' or '1' to comment out this row.",
-    },
-},
+
 ); # end of tabspec definition


@@ -1666,9 +1510,6 @@ foreach my $tabname (keys(%xCAT::ExtTab::ext_tabspec)) {
  kitcomponent => { attrs => [], attrhash => {}, objkey => 'kitcompname' },
  rack => { attrs => [], attrhash => {}, objkey => 'rackname' },
  osdistro=> { attrs => [], attrhash => {}, objkey => 'osdistroname' },
-  osdistroupdate=> { attrs => [], attrhash => {}, objkey => 'osupdatename' },
-  zone=> { attrs => [], attrhash => {}, objkey => 'zonename' },
-  
 );


@@ -1736,11 +1577,6 @@ my @nodeattrs = (
                 tabentry => 'noderes.monserver',
                 access_tabentry => 'noderes.node=attr:node',
  },
-        {attr_name => 'supportproxydhcp',
-                 tabentry => 'noderes.proxydhcp',
-                 access_tabentry => 'noderes.node=attr:node',
-  },
-
 {attr_name => 'kernel',
                 tabentry => 'bootparams.kernel',
                 access_tabentry => 'bootparams.node=attr:node',
@@ -1809,10 +1645,6 @@ my @nodeattrs = (
 	{attr_name => 'setupipforward',
                 tabentry => 'servicenode.ipforward',
                 access_tabentry => 'servicenode.node=attr:node',
-  },
-	{attr_name => 'setupproxydhcp',
-                 tabentry => 'servicenode.proxydhcp',
-                 access_tabentry => 'servicenode.node=attr:node',
  },
 # - moserver not used yet
 #	{attr_name => 'setupmonserver',
@@ -2098,11 +1930,6 @@ my @nodeattrs = (
                 tabentry => 'mp.nodetype',
                 access_tabentry => 'mp.node=attr:node',
                }, 
- {attr_name => 'hwtype',
-                 only_if => 'mgt=ipmi',
-                 tabentry => 'mp.nodetype',
-                 access_tabentry => 'mp.node=attr:node',
-                }, 
 {attr_name => 'supernode',
                 tabentry => 'ppc.supernode',
                 access_tabentry => 'ppc.node=attr:node',
@@ -2221,7 +2048,7 @@ my @nodeattrs = (
                 tabentry => 'mp.id',
                 access_tabentry => 'mp.node=attr:node',
  },
-        {attr_name => 'slotid',
+        {attr_name => 'id',
                 only_if => 'mgt=ipmi',
                 tabentry => 'mp.id',
                 access_tabentry => 'mp.node=attr:node',
@@ -2294,10 +2121,6 @@ my @nodeattrs = (
                tabentry => 'nics.nichostnamesuffixes',
                access_tabentry => 'nics.node=attr:node',
        },
-        {attr_name => 'nichostnameprefixes',
-                tabentry => 'nics.nichostnameprefixes',
-                access_tabentry => 'nics.node=attr:node',
-        },
        {attr_name => 'nictypes',
                tabentry => 'nics.nictypes',
                access_tabentry => 'nics.node=attr:node',
@@ -2370,26 +2193,10 @@ my @nodeattrs = (
                 tabentry => 'vm.storage',
                 access_tabentry => 'vm.node=attr:node',
                },
-                {attr_name => 'vmphyslots',
-                 tabentry => 'vm.physlots',
-                 access_tabentry => 'vm.node=attr:node',
-                },
-                {attr_name => 'vmothersetting',
-                 tabentry => 'vm.othersettings',
-                 access_tabentry => 'vm.node=attr:node',
-                },
                {attr_name => 'vmstoragemodel',
                 tabentry => 'vm.storagemodel',
                 access_tabentry => 'vm.node=attr:node',
                },
-                {attr_name => 'vmstoragecache',
-                 tabentry => 'vm.storagecache',
-                 access_tabentry => 'vm.node=attr:node',
-                },
-                {attr_name => 'vmstorageformat',
-                 tabentry => 'vm.storageformat',
-                 access_tabentry => 'vm.node=attr:node',
-                },
                {attr_name => 'vmcfgstore',
                 tabentry => 'vm.cfgstore',
                 access_tabentry => 'vm.node=attr:node',
@@ -2520,79 +2327,6 @@ my @nodeattrs = (
                 tabentry => 'prescripts.end',
                 access_tabentry => 'prescripts.node=attr:node',
 			},
-#################
-# cfgmgt table  #
-#################
-        {attr_name => 'cfgmgr',
-                 tabentry => 'cfgmgt.cfgmgr',
-                 access_tabentry => 'cfgmgt.node=attr:node',
-        },
-        {attr_name => 'cfgserver',
-                 tabentry => 'cfgmgt.cfgserver',
-                 access_tabentry => 'cfgmgt.node=attr:node',
-        },
-        {attr_name => 'cfgmgtroles',
-                 tabentry => 'cfgmgt.roles',
-                 access_tabentry => 'cfgmgt.node=attr:node',
-        },
-#####################
-##   mic   table    #
-#####################
-	{attr_name => 'michost',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.host',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'micid',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.id',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'hwtype',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.nodetype',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'micbridge',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.bridge',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'miconboot',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.onboot',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'micvlog',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.vlog',
-		access_tabentry => 'mic.node=attr:node',
-	},
-	{attr_name => 'micpowermgt',
-		only_if => 'mgt=mic',
-		tabentry => 'mic.powermgt',
-		access_tabentry => 'mic.node=attr:node',
-	},
-#####################
-##   hwinv   table    #
-#####################
-	{attr_name => 'cputype',
-		tabentry => 'hwinv.cputype',
-		access_tabentry => 'hwinv.node=attr:node',
-	},
-	{attr_name => 'cpucount',
-		tabentry => 'hwinv.cpucount',
-		access_tabentry => 'hwinv.node=attr:node',
-	},
-	{attr_name => 'memory',
-		tabentry => 'hwinv.memory',
-		access_tabentry => 'hwinv.node=attr:node',
-	},
-	{attr_name => 'disksize',
-		tabentry => 'hwinv.disksize',
-		access_tabentry => 'hwinv.node=attr:node',
-	},
-	
  );	# end of @nodeattrs that applies to both nodes and groups


@@ -2642,10 +2376,6 @@ my @nodeattrs = (
 		{attr_name => 'updatestatustime',
                 tabentry => 'nodelist.updatestatustime',
                 access_tabentry => 'nodelist.node=attr:node',
-             },             
-		{attr_name => 'zonename',
-                 tabentry => 'nodelist.zonename',
-                 access_tabentry => 'nodelist.node=attr:node',
             },             
 		{attr_name => 'usercomment',
                 tabentry => 'nodelist.comments',
@@ -2851,29 +2581,6 @@ push(@{$defspec{node}->{'attrs'}}, @nodeattrs);
                 access_tabentry => 'linuximage.imagename=attr:imagename',
                 },
 ####################
-# winimage table#
-####################
- {attr_name => 'template',
-                 only_if => 'imagetype=windows',
-                 tabentry => 'winimage.template',
-                 access_tabentry => 'winimage.imagename=attr:imagename',
-                }, 
- {attr_name => 'installto',
-                 only_if => 'imagetype=windows',
-                 tabentry => 'winimage.installto',
-                 access_tabentry => 'winimage.imagename=attr:imagename',
-                },
-{attr_name => 'partitionfile',
-                 only_if => 'imagetype=windows',
-                 tabentry => 'winimage.partitionfile',
-                 access_tabentry => 'winimage.imagename=attr:imagename',
-                },
-{attr_name => 'winpepath',
-                 only_if => 'imagetype=windows',
-                 tabentry => 'winimage.winpepath',
-                 access_tabentry => 'winimage.imagename=attr:imagename',
-                },
-####################
 # nimimage table#
 ####################
 {attr_name => 'nimtype',
@@ -3100,36 +2807,6 @@ push(@{$defspec{node}->{'attrs'}}, @nodeattrs);
                 access_tabentry => 'rack.rackname=attr:rackname',
        },
   );
-####################
-#  zone table      #
-####################
-@{$defspec{zone}->{'attrs'}} = (
-        {attr_name => 'zonename',
-                tabentry => 'zone.zonename',
-                access_tabentry => 'zone.zonename=attr:zonename',
-        },
-        {attr_name => 'sshkeydir',
-                tabentry => 'zone.sshkeydir',
-                access_tabentry => 'zone.zonename=attr:zonename',
-        },
-        {attr_name => 'sshbetweennodes',
-                tabentry => 'zone.sshbetweennodes',
-                access_tabentry => 'zone.zonename=attr:zonename',
-        },
-        {attr_name => 'defaultzone',
-                tabentry => 'zone.defaultzone',
-                access_tabentry => 'zone.zonename=attr:zonename',
-        },
-        {attr_name => 'usercomment',
-                 tabentry => 'zone.comments',
-                 access_tabentry => 'zone.zonename=attr:zonename',
-        },
-   );
-#########################
-#  route data object  #
-#########################
-#     routes table    #
-#########################
 #########################
 #  route data object  #
 #########################
@@ -3456,7 +3133,7 @@ push(@{$defspec{group}->{'attrs'}}, @nodeattrs);
        access_tabentry => 'firmware.file=attr:cfgfile',
     },
     {attr_name => 'disable',
-        tabentry => 'firmware.disable',
+        tabentry => 'auditlog.disable',
        access_tabentry => 'firmware.file=attr:cfgfile',
     },
 );
@@ -3495,35 +3172,6 @@ push(@{$defspec{group}->{'attrs'}}, @nodeattrs);
        },
 );

-#############################
-#  osdistroupdate object #
-#############################
-@{$defspec{osdistroupdate}->{'attrs'}} = (
-        {attr_name => 'osupdatename',
-                tabentry => 'osdistroupdate.osupdatename',
-                access_tabentry => 'osdistroupdate.osupdatename=attr:osupdatename',
-        },
-        {attr_name => 'osdistroname',
-                tabentry => 'osdistroupdate.osdistroname',
-                access_tabentry => 'osdistroupdate.osupdatename=attr:osupdatename',
-        },
-        {attr_name => 'dirpath',
-                tabentry => 'osdistroupdate.dirpath',
-                access_tabentry => 'osdistroupdate.osupdatename=attr:osupdatename',
-        },
-        {attr_name => 'downloadtime',
-                tabentry => 'osdistroupdate.downloadtime',
-                access_tabentry => 'osdistroupdate.osupdatename=attr:osupdatename',
-        },
-	{attr_name => 'usercomment',
-               tabentry => 'osdistroupdate.comments',
-                access_tabentry => 'osdistroupdate.osupdatename=attr:osupdatename',
-        },
-);
-
-#############################
-#  kit object #
-#############################
 #############################
 #  kit object #
 #############################
@@ -3534,8 +3182,8 @@ push(@{$defspec{group}->{'attrs'}}, @nodeattrs);
                 tabentry => 'kit.kitname',
                 access_tabentry => 'kit.kitname=attr:kitname',
        },
-        {attr_name => 'basename',
-                 tabentry => 'kit.basename',
+        {attr_name => 'name',
+                 tabentry => 'kit.name',
                 access_tabentry => 'kit.kitname=attr:kitname',
        },
        {attr_name => 'description',
@@ -30,6 +30,7 @@ use strict;
  Example:
    my $retdata = xCAT::ServiceNodeUtils->readSNInfo;
 =cut
+
 #-----------------------------------------------------------------------------
 sub readSNInfo
 {
@@ -101,17 +102,13 @@ sub isServiceReq
    require xCAT::Table;
    my ($class, $servicenodename, $serviceip) = @_;

-    # get list of all services from service node table ( actually all defined attributes)
-    # read the  schema
-    my $schema = xCAT::Table->getTableSchema("servicenode");
-    my @services; #  list of only the actual service attributes from the servicenode table
-    my @servicesattrs;  # building second copy for call to getAllNodeAttribs, which modifies the array
-    foreach my $c (@{$schema->{cols}}) {
-      if (($c ne "node") && ($c ne "comments") && ($c ne "disable")) {
-       push @servicesattrs,$c;
-       push @services,$c;
-      }
-    }
+    # list of all services from service node table
+    # note this must be updated if more services added
+    my @services = (
+                    "nameserver", "dhcpserver", "tftpserver", "nfsserver",
+                    "conserver",  "monserver",  "ldapserver", "ntpserver",
+                    "ftpserver",  "ipforward"
+                    );

    my @ips = @$serviceip;    # list of service node ip addresses and names
    my $rc  = 0;
@@ -142,11 +139,10 @@ sub isServiceReq
    }

    my $servicehash;
-    
-    # read all the nodes from the table, all the service attributes
-    my @snodelist= $servicenodetab->getAllNodeAttribs(\@servicesattrs); 
-    foreach my $service (@services) # check list of services
+    # read all the nodes from the table, for each service
+    foreach my $service (@services)
    {
+        my @snodelist = $servicenodetab->getAllNodeAttribs([$service]);

        foreach $serviceip (@ips)    # check the table for this servicenode
        {
@@ -163,8 +159,6 @@ sub isServiceReq
                        if (($value eq "1") || ($value eq "YES"))
                        {
                            $servicehash->{$service} = "1";
-                        } elsif ($value eq "2") {
-                            $servicehash->{$service} = "2";
                        } else {
                            $servicehash->{$service} = "0";
                        }
@@ -244,13 +238,12 @@ sub getAllSN
    # if did not input "ALL" and there is a MN, remove it
    my @newservicenodes;
    if ((!defined($options)) || ($options ne "ALL")) {   
-       my @mname = xCAT::Utils->noderangecontainsMn(@servicenodes);
-       if (@mname) { # if there is a MN
-        foreach my $node (@servicenodes) {
-          # check to see if node in MN list
-          if (!(grep(/^$node$/, @mname))) { # if node not in the MN array
-              push @newservicenodes, $node;
-          }
+       my $mname = xCAT::Utils->noderangecontainsMn(@servicenodes);
+       if ($mname) { # if there is a MN
+        foreach my $nodes (@servicenodes) {
+           if ($mname ne ($nodes)){
+              push @newservicenodes, $nodes;
+           }
        }
        $servicenodetab->close;
        return @newservicenodes;  # return without the MN in the array
@@ -358,7 +351,7 @@ sub getSNList
    $servicenodetab->close;
    foreach my $node (@nodes)
    {
-        if  (! defined ($service) || ($service eq ""))     # want all the service nodes
+        if ($service eq "")     # want all the service nodes
        {
            push @servicenodes, $node->{node};
        }
@@ -70,7 +70,7 @@ require xCAT::NotifHandler;

 my $dbworkerpid; #The process id of the database worker
 my $dbworkersocket;
-my $dbsockpath = "/var/run/xcat/dbworker.sock.".$$;
+my $dbsockpath = "/tmp/xcat/dbworker.sock.".$$;
 my $exitdbthread;
 my $dbobjsforhandle;
 my $intendedpid;
@@ -159,7 +159,7 @@ sub init_dbworker {
        #This process is the database worker, it's job is to manage database queries to reduce required handles and to permit cross-process caching
        $0 = "xcatd: DB Access";
        use File::Path;
-        mkpath('/var/run/xcat/');
+        mkpath('/tmp/xcat/');
        use IO::Socket;
        $SIG{TERM} = $SIG{INT} = sub {
            $exitdbthread=1;
@@ -323,8 +323,6 @@ sub handle_dbc_request {
         return $opentables{$tablename}->{$autocommit}->getAllNodeAttribs(@args);
    } elsif ($functionname eq 'getAllEntries') {
         return $opentables{$tablename}->{$autocommit}->getAllEntries(@args);
-    } elsif ($functionname eq 'getMAXMINEntries') {
-         return $opentables{$tablename}->{$autocommit}->getMAXMINEntries(@args);
    } elsif ($functionname eq 'writeAllEntries') {
         return $opentables{$tablename}->{$autocommit}->writeAllEntries(@args);
    } elsif ($functionname eq 'getAllAttribsWhere') {
@@ -1605,7 +1603,7 @@ sub setAttribs
           # delimit the columns of the table
 	   my $delimitedcol = &delimitcol($col);	
           $cols = $cols . $delimitedcol . " = ?,";
-           push @bind, (($$elems{$col} eq "NULL") ? undef: $$elems{$col});
+           push @bind, (($$elems{$col} =~ /NULL/) ? undef: $$elems{$col});
        }
        chop($cols);
        my $cmd ;
@@ -1788,7 +1786,7 @@ sub setAttribsWhere
      # delimit the columns of the table
      my $delimitedcol = &delimitcol($col);	
      $cols = $cols . $delimitedcol . " = ?,";
-      push @bind, (($$elems{$col} eq "NULL") ? undef: $$elems{$col});
+      push @bind, (($$elems{$col} =~ /NULL/) ? undef: $$elems{$col});
    }
    chop($cols);
    my $cmd = "UPDATE " . $self->{tabname} . " set $cols where " . $where_clause;
@@ -2351,6 +2349,71 @@ sub getNodeAttribs

 #--------------------------------------------------------------------------

+=head3 getNodeSpecAttribs
+    Description: Retrieves the requested attributes which matching the specified options for a node
+    Arguments:
+        Noderange
+        The specified options
+        List of attributes 
+    Return:
+        Attribute hash 
+    Example:
+        my $tab = xCAT::Table->new('ppcdirect');
+        my $ent = $tab->getNodeSpecAttribs($node, {username=>'HMC'}, qw/password/); 
+    Comments:
+        The keys of the specified options can be given in the list of attributes or not, 
+        this routine will deal with them.
+=cut
+
+#--------------------------------------------------------------------------
+
+#sub getNodeSpecAttribs {
+#    my $self = shift;
+#    my $node = shift;
+#    my %options = ();
+#    my @attribs = ();
+#    my @keys = ();
+#    if (ref $_[0] eq 'HASH') {
+#        %options = %{shift()};
+#        @attribs = @_;
+#        foreach my $key (keys %options) {
+#            if (!grep(/^$key$/, @attribs)) {
+#                push @attribs, $key;
+#            }
+#        }
+#    } else {
+#        @attribs = @_;
+#    }
+#    if ((keys (%options)) == 0) {
+#        my $ent = $self->getNodeAttribs($node, \@attribs);
+#        return $ent; 
+#    } else {
+#        my $nodekey = "node";
+#        if (defined $xCAT::Schema::tabspec{$self->{tabname}}->{nodecol}) {
+#            $nodekey = $xCAT::Schema::tabspec{$self->{tabname}}->{nodecol};
+#        }
+#        $options{$nodekey} = $node;
+#        my $ent = $self->getAttribs(\%options, \@attribs);
+#        if ($ent) {
+#            return $ent;
+#        }
+#        my ($nodeghash) = $self->{nodelist}->getAttribs({node=>$node}, "groups");
+#        unless(defined($nodeghash) && defined($nodeghash->{groups})) {
+#            return undef;
+#        }
+#        my @nodegroups = split(/,/, $nodeghash->{groups});
+#        foreach my $group (@nodegroups) {
+#            $options{$nodekey} = $group;
+#            my $g_ret = $self->getAttribs(\%options, \@attribs);
+#            if ($g_ret) {
+#                return $g_ret;
+#            }
+#        }
+#    }
+#    return undef;
+#}
+#--------------------------------------------------------------------------
+
 =head3 getNodeAttribs_nosub

    Description:
@@ -2904,14 +2967,10 @@ sub getAllNodeAttribs
 		$self->{nrcache}->{$data->{$nodekey}}->{tstamp} = time();
 	    }
            @nodes = @{$self->{nrcache}->{$data->{$nodekey}}->{value}};    #expand node entry, to make groups expand
-
-            #If node not in nodelist do not add to the hash (SF 3580)
-            #unless (@nodes) { #in the event of an entry not in nodelist, use entry value verbatim
-            #    @nodes = ($data->{$nodekey});
-            #}  end SF 3580
-
+            unless (@nodes) { #in the event of an entry not in nodelist, use entry value verbatim
+                @nodes = ($data->{$nodekey});
+            }
            #my $localhash = $self->getNodesAttribs(\@nodes,$attribq); #NOTE:  This is stupid, rebuilds the cache for every entry, FIXME
-
            foreach (@nodes)
            {
                if ($donenodes{$_}) { next; }
@@ -3990,97 +4049,5 @@ sub output_table {
   print $fh "\n";
   return 0;
 }
-#--------------------------------------------------------------------------
-
-=head3 getMAXMINEntries
-
-    Description: Select the rows in  the Table which has the MAX and the row with the 
-                 Min value for the input attribute.
-                 Currently only the auditlog and evenlog are setup to have such an attribute (recid). 
-
-    Arguments:
-           Table handle
-           attribute name ( e.g. recid)
-
-    Returns:
-        HASH 
-            max=>  max value
-            min=>  min value 
-    Globals:
-
-    Error:
-
-    Example:
-
-	 my $tabh = xCAT::Table->new($table);
-         my $recs=$tabh->getMAXMINEntries("recid"); 
-
-    Comments:
-        none
-
-=cut
-
-#--------------------------------------------------------------------------------
-sub getMAXMINEntries
-{
-    my $self = shift;
-    if ($dbworkerpid) {
-        return dbc_call($self,'getMAXMINEntries',@_);
-    }
-    my $attr = shift;
-    my $rets;
-    my $query;
-    my $xcatcfg=get_xcatcfg();
-    # delimit the disable column based on the DB 
-    my $disable= &delimitcol("disable");	
-    my $qstring;
-    if ($xcatcfg =~ /^DB2:/) {  # for DB2 
-       $qstring = "SELECT MAX (\"$attr\") FROM " . $self->{tabname} . " WHERE " . $disable . " is NULL or " .  $disable . " in ('0','no','NO','No','nO')";
-    } else {
-       $qstring = "SELECT MAX($attr) FROM " . $self->{tabname} . " WHERE " . $disable . " is NULL or " .  $disable . " in ('0','no','NO','No','nO')";
-    }
-    $query = $self->{dbh}->prepare($qstring);
-
-    $query->execute();
-    while (my $data = $query->fetchrow_hashref())
-    {
-        foreach (keys %$data)
-        {
-            if ($data->{$_} =~ /^$/)
-            {
-                $rets->{"max"} = undef;
-            } else {
-                $rets->{"max"} = $data->{$_};
-
-            }
-            last;   # better only be one value for max
-            
-        }
-    }
-    $query->finish();
-    if ($xcatcfg =~ /^DB2:/) {  # for DB2 
-       $qstring = "SELECT MIN (\"$attr\") FROM " . $self->{tabname} . " WHERE " . $disable . " is NULL or " .  $disable . " in ('0','no','NO','No','nO')";
-    } else {
-    $qstring = "SELECT MIN($attr) FROM " . $self->{tabname} . " WHERE " . $disable . " is NULL or " .  $disable . " in ('0','no','NO','No','nO')";
-    }
-    $query = $self->{dbh}->prepare($qstring);
-
-    $query->execute();
-    while (my $data = $query->fetchrow_hashref())
-    {
-        foreach (keys %$data)
-        {
-            if ($data->{$_} =~ /^$/)
-            {
-                $rets->{"min"} = undef;
-            } else {
-                $rets->{"min"} = $data->{$_};
-            }
-            last;   # better be only one value  for min
-        }
-    }
-    return $rets;
-}
-
 1;

@@ -19,7 +19,6 @@ if ($^O =~ /^aix/i) {
 use lib "$::XCATROOT/lib/perl";
 use strict;
 require xCAT::Table;
-require xCAT::Zone;
 use File::Path;
 #-----------------------------------------------------------------------

@@ -258,7 +257,6 @@ sub bldnonrootSSHFiles

        Arguments:
               Array of nodes
-               Timeout for expect call (optional)
        Returns:

        Env Variables: $DSH_FROM_USERID,  $DSH_TO_USERID, $DSH_REMOTE_PASSWORD
@@ -272,7 +270,7 @@ sub bldnonrootSSHFiles
        Error:
             0=good,  1=error
        Example:
-                xCAT::TableUtils->setupSSH(@target_nodes,$expecttimeout);
+                xCAT::TableUtils->setupSSH(@target_nodes);
        Comments:
 			Does not setup known_hosts.  Assumes automatically
 			setup by SSH  ( ssh config option StrictHostKeyChecking no should
@@ -283,7 +281,7 @@ sub bldnonrootSSHFiles
 #--------------------------------------------------------------------------------
 sub setupSSH
 {
-    my ($class, $ref_nodes,$expecttimeout) = @_;
+    my ($class, $ref_nodes) = @_;
    my @nodes    = $ref_nodes;
    my @badnodes = ();
    my $n_str    = $nodes[0];
@@ -336,24 +334,23 @@ sub setupSSH

    $::REMOTE_SHELL = "/usr/bin/ssh";
    my $rsp = {};
-    

    # Get the home directory
    my $home = xCAT::Utils->getHomeDir($from_userid);
    $ENV{'DSH_FROM_USERID_HOME'} = $home;
+
    if ($from_userid eq "root")
    {
+
        # make the directory to hold keys to transfer to the nodes
        if (!-d $SSHdir)
        {
            mkpath("$SSHdir", { mode => 0755 });
        }

-        # generates new keys for root, if they do not already exist ~/.ssh
-
-        # nodes not used on this option but in there to preserve the interface
+        # generates new keys for root, if they do not already exist
        my $rc=
-          xCAT::RemoteShellExp->remoteshellexp("k",$::CALLBACK,$::REMOTE_SHELL,$n_str,$expecttimeout);
+     xCAT::RemoteShellExp->remoteshellexp("k",$::CALLBACK,$::REMOTE_SHELL);
       if ($rc != 0) {
            $rsp->{data}->[0] = "remoteshellexp failed generating keys.";
            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
@@ -375,10 +372,7 @@ else
 fi
 mkdir -p \$dest_dir
 cat /tmp/$to_userid/.ssh/authorized_keys >> \$home/.ssh/authorized_keys 2>&1
-cat /tmp/$to_userid/.ssh/id_rsa.pub >> \$home/.ssh/authorized_keys 2>&1
-rm -f \$home/.ssh/id_rsa 2>&1
 cp /tmp/$to_userid/.ssh/id_rsa  \$home/.ssh/id_rsa 2>&1
-cp /tmp/$to_userid/.ssh/id_rsa.pub  \$home/.ssh/id_rsa.pub 2>&1
 chmod 0600 \$home/.ssh/id_* 2>&1
 rm -f /tmp/$to_userid/.ssh/* 2>&1
 rmdir \"/tmp/$to_userid/.ssh\"
@@ -390,7 +384,6 @@ rmdir \"/tmp/$to_userid\" \n";
    my $auth_key2=0;
    if ($from_userid eq "root")
    {
-       # this will put the root/.ssh/id_rsa.pub key in the authorized keys file to put on the node
       my $rc = xCAT::TableUtils->cpSSHFiles($SSHdir);
       if ($rc != 0)
       {    # error
@@ -423,49 +416,53 @@ rmdir \"/tmp/$to_userid\" \n";
            xCAT::TableUtils->bldnonrootSSHFiles($from_userid);
    }

-    # send the keys 
+    # send the keys to the nodes   for root or some other id
+    #
+    # This environment variable determines whether to setup 
+    # node to node ssh
+    # The nodes must be checked against the site.sshbetweennodes attribute
    # For root user and not to devices only to nodes 
    if (($from_userid eq "root") && (!($ENV{'DEVICETYPE'}))) {
-      # Need to check if nodes are in a zone.  
-      my @zones;
-      my $tab = xCAT::Table->new("zone"); 
-      if ($tab) 
+      my $enablenodes;
+      my $disablenodes;
+      my @nodelist=  split(",", $n_str);
+      foreach my $n (@nodelist)
      {
-          # if we have zones, need to send the zone keys to each node in the zone
-          my @attribs = ("zonename");
-          @zones = $tab->getAllAttribs(@attribs);
-          $tab->close();
-      } else {
-         $rsp->{data}->[0] = "Could not open zone table.\n";
-         xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-         return 1;
-      }
-      # check for zones,  key send is different if zones defined or not
-      
-      if (@zones) {  # we have zones defined
-         my $rc = xCAT::TableUtils->sendkeysTOzones($ref_nodes,$expecttimeout);
-         if ($rc != 0)
-         {   
-                $rsp->{data}->[0] = "Error sending ssh keys to the zones.\n";
-                xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-                exit 1;
-
+         my $enablessh=xCAT::TableUtils->enablessh($n);
+         if ($enablessh == 1) {
+           $enablenodes .= $n;
+           $enablenodes .= ","; 
+         } else {
+           $disablenodes .= $n;
+           $disablenodes .= ","; 
         }
-      } else { # no zones
-      
-         #  if no zone table  defined, do it the old way , keys are in  ~/.ssh 
-         my $rc = xCAT::TableUtils->sendkeysNOzones($ref_nodes,$expecttimeout);
+
+      }
+      my $cmd;
+      if ($enablenodes) {  # node on list to setup nodetonodessh
+         chop $enablenodes;  # remove last comma
+         $ENV{'DSH_ENABLE_SSH'} = "YES";
+         my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$enablenodes);
         if ($rc != 0)
-         {   
-            $rsp->{data}->[0] = "Error sending ssh keys to the nodes.\n";
-            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
+         {
+          $rsp->{data}->[0] = "remoteshellexp failed sending keys to enablenodes.";
+          xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
+
+          }
+      }
+      if ($disablenodes) {  # node on list to setup nodetonodessh
+         chop $disablenodes;  # remove last comma
+         my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$disablenodes);
+         if ($rc != 0)
+         {
+          $rsp->{data}->[0] = "remoteshellexp failed sending keys to disablenodes.";
+          xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);

         }
      }
-
    } else { # from user is not root or it is a device , always send private key
       $ENV{'DSH_ENABLE_SSH'} = "YES";
-       my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$n_str,$expecttimeout);
+       my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$n_str);
       if ($rc != 0)
       {
           $rsp->{data}->[0] = "remoteshellexp failed sending keys.";
@@ -479,7 +476,7 @@ rmdir \"/tmp/$to_userid\" \n";
    foreach my $n (@testnodes)
    {
       my $rc=
-     xCAT::RemoteShellExp->remoteshellexp("t",$::CALLBACK,"/usr/bin/ssh",$n,$expecttimeout);
+     xCAT::RemoteShellExp->remoteshellexp("t",$::CALLBACK,"/usr/bin/ssh",$n);
        if ($rc != 0)
        {
            push @badnodes, $n;
@@ -504,235 +501,6 @@ rmdir \"/tmp/$to_userid\" \n";

 #--------------------------------------------------------------------------------

-=head3  sendkeysNOzones 
-
-        Transfers the ssh keys 
-		for the root id on the nodes no zones 
-          key from ~/.ssh   site.sshbetweennodes honored
-
-
-        Arguments:
-               Array of nodes
-               Timeout for expect call (optional)
-        Returns:
-
-        Env Variables: $DSH_FROM_USERID,  $DSH_TO_USERID, $DSH_REMOTE_PASSWORD
-          the ssh keys are transferred from the $DSH_FROM_USERID to the $DSH_TO_USERID
-          on the node(s).  The DSH_REMOTE_PASSWORD and the DSH_FROM_USERID 
-               must be obtained by
-		         the calling script or from the xdsh client
-
-        Globals:
-              $::XCATROOT  ,  $::CALLBACK
-        Error:
-             0=good,  1=error
-        Example:
-                xCAT::TableUtils->sendkeysNOzones($ref_nodes,$expecttimeout);
-        Comments:
-			Does not setup known_hosts.  Assumes automatically
-			setup by SSH  ( ssh config option StrictHostKeyChecking no should
-			   be set in the ssh config file).
-
-=cut
-
-#--------------------------------------------------------------------------------
-sub sendkeysNOzones 
-{
-      my ($class, $ref_nodes,$expecttimeout) = @_;
-      my @nodes=$ref_nodes;
-      my $enablenodes;
-      my $disablenodes;
-      my $n_str    = $nodes[0];
-      my @nodelist=  split(",", $n_str);
-      my $rsp = ();
-      foreach my $n (@nodelist)
-      {
-         my $enablessh=xCAT::TableUtils->enablessh($n);
-         if ($enablessh == 1) {
-           $enablenodes .= $n;
-           $enablenodes .= ","; 
-         } else {
-           $disablenodes .= $n;
-           $disablenodes .= ","; 
-         }
-
-      }
-      if ($enablenodes) {  # node on list to setup nodetonodessh
-         chop $enablenodes;  # remove last comma
-         $ENV{'DSH_ENABLE_SSH'} = "YES";
-         # send the keys to the nodes
-         my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$enablenodes,$expecttimeout);
-         if ($rc != 0)
-         {
-          $rsp->{data}->[0] = "remoteshellexp failed sending keys to enablenodes.";
-          xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-
-          }
-      }
-      if ($disablenodes) {  # node on list to disable nodetonodessh
-         chop $disablenodes;  # remove last comma
-         # send the keys to the nodes
-         my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",$disablenodes,$expecttimeout);
-         if ($rc != 0)
-         {
-          $rsp->{data}->[0] = "remoteshellexp failed sending keys to disablenodes.";
-          xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-
-         }
-      }
-}
-#--------------------------------------------------------------------------------
-
-=head3  sendkeysTOzones 
-
-        Transfers the ssh keys 
-		for the root id on the nodes using the zone table.
-       If in a zone, then root ssh keys for the node will be taken from the zones ssh keys not ~/.ssh
-       zones are only supported on nodes that are not a service node.
-       Also for the call to  RemoteShellExp,  we must group the nodes that are in the same zone 
-
-
-        Arguments:
-               Array of nodes
-               Timeout for expect call (optional)
-        Returns:
-
-        Env Variables: $DSH_FROM_USERID,  $DSH_TO_USERID, $DSH_REMOTE_PASSWORD
-          the ssh keys are transferred from the $DSH_FROM_USERID to the $DSH_TO_USERID
-          on the node(s).  The DSH_REMOTE_PASSWORD and the DSH_FROM_USERID 
-               must be obtained by
-		         the calling script or from the xdsh client
-
-        Globals:
-              $::XCATROOT  ,  $::CALLBACK
-        Error:
-             0=good,  1=error
-        Example:
-                xCAT::TableUtils->sendkeysTOzones($ref_nodes,$expecttimeout);
-        Comments:
-			Does not setup known_hosts.  Assumes automatically
-			setup by SSH  ( ssh config option StrictHostKeyChecking no should
-			   be set in the ssh config file).
-
-=cut
-
-#--------------------------------------------------------------------------------
-sub sendkeysTOzones 
-{
-      my ($class, $ref_nodes,$expecttimeout) = @_;
-      my @nodes=$ref_nodes;
-      my $n_str    = $nodes[0];
-      @nodes=  split(",", $n_str);
-      my $rsp = ();
-      my $cmd;
-      my $roothome = xCAT::Utils->getHomeDir("root");
-      my $zonehash =xCAT::Zone->getzoneinfo($::CALLBACK,\@nodes);
-      foreach my $zonename (keys %$zonehash) {
-        # build list of nodes
-        my $zonenodelist="";
-        foreach my $node (@{$zonehash->{$zonename}->{nodes}}) {
-          $zonenodelist .= $node;
-          $zonenodelist .= ",";
-               
-        }
-        $zonenodelist =~ s/,$//;   # remove last comma
-        # if any nodes defined for the zone
-        if ($zonenodelist) {
-          # check to see if we enable passwordless ssh between the nodes
-          if (!(defined($zonehash->{$zonename}->{sshbetweennodes}))|| 
-            (($zonehash->{$zonename}->{sshbetweennodes} =~ /^yes$/i )
-             || ($zonehash->{$zonename}->{sshbetweennodes} eq "1"))) {
- 
-             $ENV{'DSH_ENABLE_SSH'} = "YES";
-          } else { 
-             delete $ENV{'DSH_ENABLE_SSH'};  # do not enable passwordless ssh
-          }
-          # point to the ssh keys to send for this zone
-          my $keydir = $zonehash->{$zonename}->{sshkeydir} ;
-
-          # check to see if the id_rsa and id_rsa.pub key is in the directory
-          my $key="$keydir/id_rsa";
-          my $key2="$keydir/id_rsa.pub";
-          # Check to see if empty
-          if (!(-e $key)) {
-            my $rsp = {};
-             $rsp->{error}->[0] =
-            "The $key file does not exist for $zonename. Need to use chzone to regenerate the keys.";
-            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
-            return 1;
-          }
-          if (!(-e $key2)) {
-             my $rsp = {};
-             $rsp->{error}->[0] =
-             "The $key2 file does not exist for $zonename. Need to use chzone to regenerate the keys.";
-             xCAT::MsgUtils->message("E", $rsp, $::CALLBACK, 1);
-             return 1;
-
-          }
-          
-          # now put copy.sh in the zone directory from ~/.ssh
-          my $rootkeydir="$roothome/.ssh";
-          if ($rootkeydir ne $keydir) {  # the zone keydir is not the same as ~/.ssh.  
-            $cmd="cp $rootkeydir/copy.sh $keydir";
-            xCAT::Utils->runcmd($cmd, 0);
-            if ($::RUNCMD_RC != 0)
-            {
-               my $rsp = {};
-               $rsp->{error}->[0] =
-               "Could not copy copy.sh to the zone key dir";
-               xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-               return 1;
-            }
-          }
-          # Also create  $keydir/tmp and put root's id_rsa.pub (in authorized_keys) for the transfer
-          $cmd="mkdir -p $keydir/tmp";
-          xCAT::Utils->runcmd($cmd, 0);
-          if ($::RUNCMD_RC != 0)
-          {
-             my $rsp = {};
-             $rsp->{error}->[0] =
-             "Could not mkdir the zone $keydir/tmp";
-             xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-             return 1;
-          }
-          # create authorized_keys file 
-          if (xCAT::Utils->isMN()) {    # if on Management Node
-             $cmd = " cp $roothome/.ssh/id_rsa.pub $keydir/tmp/authorized_keys";
-          } else {  # SN
-             $cmd = " cp $roothome/.ssh/authorized_keys $keydir/tmp/authorized_keys";
-          }
-          xCAT::Utils->runcmd($cmd, 0);
-          if ($::RUNCMD_RC != 0)
-          {
-            $rsp->{data}->[0] = "$cmd failed.\n";
-            xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-            return (1);
-          }
-          else
-          {
-             chmod 0600, "$keydir/.ssh/tmp/authorized_keys";
-          }
-          # strip off .ssh
-          my ($newkeydir,$ssh) = (split(/\.ssh/, $keydir));
-          $ENV{'DSH_ZONE_SSHKEYS'} =$newkeydir ;
-          # send the keys to the nodes
-           my $rc=xCAT::RemoteShellExp->remoteshellexp("s",$::CALLBACK,"/usr/bin/ssh",
-           $zonenodelist,$expecttimeout);
-           if ($rc != 0)
-           {
-             $rsp = {};
-             $rsp->{data}->[0] = "remoteshellexp failed sending keys to $zonename.";
-             xCAT::MsgUtils->message("E", $rsp, $::CALLBACK);
-
-           }
-        } # end nodes in the zone
-          
-       }  # end for each zone
-
-    return (0);
-}
-#--------------------------------------------------------------------------------
-
 =head3    cpSSHFiles

           Builds authorized_keyfiles for root 
@@ -1177,9 +945,7 @@ sub getAppStatus
    my ($class, $nodes_ref, $application) = @_;
    my @nodes = @$nodes_ref;

-    # FIXME: why autocommit matters for a read-only subroutine getNodesAttribs?
-    # but could not get the appstatus without the autocommit=0
-    my $nltab = xCAT::Table->new('nodelist', -autocommit => 0);
+    my $nltab = xCAT::Table->new('nodelist');
    my $nodeappstat = $nltab->getNodesAttribs(\@nodes,['appstatus']);

    my $ret_nodeappstat;
@@ -1732,10 +1498,19 @@ sub enablessh
    my ($class, $node) = @_;
    my $enablessh=1;
    
-    if( xCAT::Utils->isSN($node) ) {
+    if( %::GLOBAL_SN_HASH ) {
+        if ($::GLOBAL_SN_HASH{$node} == 1) {
            $enablessh=1;   # service nodes always enabled
-       
+
+        } 
    } else { 
+        if (xCAT::Utils->isSN($node)) 
+        {
+            $enablessh=1;   # service nodes always enabled
+        }
+        else
+       {
+
        # if not a service node we need to check, before enabling
        my $values;
        my @vals = xCAT::TableUtils->get_site_attribute("sshbetweennodes");
@@ -1779,93 +1554,12 @@ sub enablessh
            $enablessh=1;

         }
+       }
    }
    return $enablessh;

 }

-#-------------------------------------------------------------------------------
-
-=head3  enableSSH 
-    Description:
-        The function is same as enablessh() above. Before using this function,
-        the $sn_hash for noderange, and $groups_hash for site.sshbetweennodes should be
-        got.  This is performance improvement.
-    Arguments:
-        $node  --  node name
-        $sn_hash -- if the node is one sn, key is the node name, and value is 1. 
-                    if the node is not a sn, the key isn't in this hash
-        $groups_hash -- there are two keys:
-                     1.  Each group in the value of site.sshbetweennodes could be the key
-                     2.  Each node in the groups from the value of site.sshbetweennodes , if the 
-                         value isn't ALLGROUPS or NOGROUPS.
-          
-    Returns:
-       1 = enable ssh
-       0 = do not enable ssh 
-    Globals:
-        none
-    Error:
-        none
-    Example:
-        my $enable = xCAT::TableUtils->enableSSH($node);
-    Comments:
-
-=cut
-
-#-----------------------------------------------------------------------------
-
-sub enableSSH
-{
-
-    my ($class, $node, $sn_hash, $groups_hash) = @_;
-    my $enablessh=1;
-    
-    if( defined($sn_hash) && defined($sn_hash->{node}) && $sn_hash->{$node} == 1 ) {
-            $enablessh=1;   # service nodes always enabled
-       
-    } else { 
-        # if not a service node we need to check, before enabling
-          if (keys %$groups_hash) {   # not empty
-            if  ($groups_hash->{ALLGROUPS} == 1)
-            {
-              $enablessh=1;
-            }
-            else
-            {
-                if ($groups_hash->{NOGROUPS} == 1)
-                {
-                      $enablessh=0;
-                }
-                else
-                {    # check to see if the node is a member of a group
-                    my $ismember = 0;
-                    $ismember = $groups_hash->{$node};
-
-                    if ($ismember == 1)
-                    {
-                        $enablessh=1;
-                    }
-                    else
-                    {
-                        $enablessh=0;
-                    }
-                }
-            }
-         }
-         else
-         {    # does not exist, set default
-            $enablessh=1;
-
-         }
-    }
-    return $enablessh;
-
-}
-
-
-
-

 #-----------------------------------------------------------------------------

@@ -1969,100 +1663,4 @@ sub getimagenames()
    $nodetab->close;
    return @imagenames;
 }
-#-----------------------------------------------------------------------------
-
-
-=head3 updatenodegroups
-    Update groups attribute for the specified node
-
-    Arguments:
-      node
-      tabhd: the handler of 'nodelist' table, 
-      groups: the groups attribute need to be merged.
-              Can be an array or string. 
-    Globals:
-        none
-    Error:
-    Example:
-         xCAT::TableUtils->updatenodegroups($node, $tab, $groups);
-
-=cut
-
-#-----------------------------------------------------------------------------
-
-sub updatenodegroups {
-    my ($class, $node, $tabhd, $groups) = @_;
-    if (!$groups) {
-        $groups = $tabhd;
-        $tabhd = xCAT::Table->new('nodelist');
-        unless ($tabhd)  { 
-           xCAT::MsgUtils->message("E", " Could not read the nodelist table\n");
-           return; 
-        }
-    }
-    my ($ent) = $tabhd->getNodeAttribs($node, ['groups']);
-    my @list = ();
-    if (defined($ent) and $ent->{groups}) {
-        push @list, split(/,/,$ent->{groups});
-    }   
-    if (ref($groups) eq 'ARRAY') {
-        push @list, @$groups;
-    } else {
-        push @list, split(/,/,$groups);
-    }
-    my %saw;
-    @saw{@list} = ();
-    @list = keys %saw;
-    $tabhd->setNodeAttribs($node, {groups=>join(",",@list)});
-}
-#-----------------------------------------------------------------------------
-
-
-=head3 rmnodegroups
-    remove groups from the group attribute for the specified node
-
-    Arguments:
-      node
-      tabhd: the handler of 'nodelist' table, 
-      groups: the groups that need to be removed.
-              Can be an array or string. 
-    Globals:
-        none
-    Error:
-    Example:
-         xCAT::TableUtils->rmnodegroups($node, $tab, $groups);
-
-=cut
-
-#-----------------------------------------------------------------------------
-
-sub rmnodegroups {
-    my ($class, $node, $tabhd, $groups) = @_;
-    my ($ent) = $tabhd->getNodeAttribs($node, ['groups']);
-    my @definedgroups;
-    my @removegroups;
-    my @newgroups;
-    if (defined($ent) and $ent->{groups}) {
-        push @definedgroups, split(/,/,$ent->{groups});
-    }   
-    if (ref($groups) eq 'ARRAY') {
-        push @removegroups, @$groups;
-    } else {
-        push @removegroups, split(/,/,$groups);
-    }
-    # take out any groups that match the input list of groups to remove
-    foreach my $dgrp (@definedgroups){
-       if (grep(/^$dgrp$/, @removegroups)) { # is the group to be removed
-          next;
-       } else {  # keep this group
-         push @newgroups,$dgrp;
-       } 
-    }
-    my %saw;
-    @saw{@newgroups} = ();
-    @newgroups = keys %saw;
-    
-    $tabhd->setNodeAttribs($node, {groups=>join(",",@newgroups)});
-}
-
 1;
@@ -36,13 +36,11 @@ my %usage = (
     LPAR(using Direct FSP Management) specific:
       rpower <noderange> [on|off|reset|stat|state|boot|of|sms]
     Blade(using Direct FSP Management) specific:
-       rpower <noderange> [on|onstandby|off|cycle|state|sms]
+       rpower <noderange> [on|off|cycle|state]
     Blade(using AMM) specific:
       rpower <noderange> [cycle|softoff] [-V|--verbose]
     zVM specific:
       rpower noderange [on|off|reset|stat|softoff]
-     MIC specific:
-       rpower noderange [stat|state|on|off|reset|boot]
 ",
    "rbeacon" => 
 "Usage: rbeacon <noderange> [on|off|stat] [-V|--verbose]
@@ -60,9 +58,7 @@ my %usage = (
  Blade specific:
      rvitals noderange {temp|wattage|fanspeed|leds|summary|all}
  BMC specific:
-      rvitals noderange {temp|voltage|wattage|fanspeed|power|leds|lcds|summary|all}
-  MIC specific:
-      rvitals noderange {thermal|all}",
+      rvitals noderange {temp|voltage|wattage|fanspeed|power|leds|lcds|summary|all}",
    "reventlog" => 
 "Usage: reventlog <noderange> [all [-s]|clear|<number of entries to retrieve> [-s]] [-V|--verbose]
       reventlog [-h|--help|-v|--version]",
@@ -72,24 +68,22 @@ my %usage = (
       rinv <noderange> [all|model|serial] [-V|--verbose]
       rinv [-h|--help|-v|--version]
    BMC specific:
-       rinv <noderange> [mprom|deviceid|uuid|guid|vpd [-t]|all [-t]]
+       rinv <noderange> [vpd|mprom|deviceid|uuid|guid]
    MPA specific:
-       rinv <noderange> [firm|bios|diag|mprom|sprom|mparom|mac|mtm [-t]] 
+       rinv <noderange> [firm|bios|diag|mprom|sprom|mparom|mac|mtm]
    PPC specific(with HMC):
-       rinv <noderange> [all|bus|config|serial|model|firm [-t]]
+       rinv <noderange> [bus|config|serial|model|firm|all]
    PPC specific(using Direct FSP Management):
       rinv <noderange> [firm]
       rinv <noderange> [deconfig [-x]]
    Blade specific:
-       rinv <noderange> [all|serial|mac|bios|diag|mprom|mparom|firm|mtm [-t]]
+       rinv <noderange> [mtm|serial|mac|bios|diag|mprom|mparom|firm|all]
    IBM Flex System Compute Node specific:
       rinv <noderange> [firm]
    VMware specific:
       rinv <noderange>
    zVM specific:
-       rinv noderange [all|config]
-    MIC specific:
-       rinv noderange [system|ver|board|core|gddr|all]",
+       rinv noderange [all|config]",
    "rsetboot" => 
 "Usage: rsetboot <noderange> [net|hd|cd|floppy|def|stat] [-V|--verbose]
       rsetboot [-h|--help|-v|--version]",
@@ -199,15 +193,10 @@ my %usage = (
 "Usage:
    Common:
       mkvm [-h|--help|-v|--version]
-    For PPC(with HMC) specific:
+    For PPC(with HMC):
       mkvm noderange -i id -l singlenode [-V|--verbose]
       mkvm noderange -c destcec -p profile [-V|--verbose]
       mkvm noderange --full [-V|--verbose]
-    PPC (using Direct FSP Management) specific:
-       mkvm noderange [--full]
-       mkvm noderange [vmcpus=min/req/max] [vmmemory=min/req/max]
-                      [vmphyslots=drc_index1,drc_index2...] [vmothersetting=hugepage:N,bsr:N]
-                      [vmnics=vlan1,vlan2] [vmstorage=<N|viosnode:slotid>] [--vios]
    For KVM
       mkvm noderange -m|--master mastername -s|--size disksize -f|--force
    For zVM
@@ -221,8 +210,7 @@ my %usage = (
   PPC (with HMC) specific:
       lsvm <noderange> [-a|--all]
   PPC (using Direct FSP Management) specific:
-       lsvm <noderange> [-l|--long] --p775
-       lsvm <noderange> 
+       lsvm <noderange> [-l|--long]
   zVM specific:
       lsvm noderange
       lsvm noderange --getnetworknames
@@ -237,13 +225,9 @@ my %usage = (
       chvm <noderange> [-p profile][-V|--verbose] 
       chvm <noderange> <attr>=<val> [<attr>=<val>...]
   PPC (using Direct FSP Management) specific:
-       chvm <noderange> --p775 [-p <profile>]
-       chvm <noderange> --p775 -i <id> [-m <memory_interleaving>] -r <partition_rule>
+       chvm <noderange> [-p <profile>]
       chvm <noderange> [lparname=<*|name>]
-       chvm <noderange> [vmcpus=min/req/max] [vmmemory=min/req/max]
-                        [vmphyslots=drc_index1,drc_index2...] [vmothersetting=hugepage:N,bsr:N]
-                        [vmnics=vlan1,vlan2] [vmstorage=<N|viosnode:slotid>] [--vios]
-       chvm <noderange> [del_vadapter=slotid]
+       chvm <noderange> -i <id> [-m <memory_interleaving>] -r <partition_rule>
   VMware specific:
       chvm <noderange> [-a size][-d disk][-p disk][--resize disk=size][--cpus count][--mem memory]
   zVM specific:
@@ -274,13 +258,11 @@ my %usage = (
    "rmvm" => 
 "Usage: rmvm <noderange> [--service][-V|--verbose] 
       rmvm [-h|--help|-v|--version],
-       rmvm [-p] [-f]
-       PPC (using Direct FSP Management) specific:
-       rmvm <noderange>",
+       rmvm [-p] [-f]",
    "lsslp" =>
 "Usage: lsslp [-h|--help|-v|--version]
       lsslp [<noderange>][-V|--verbose][-i ip[,ip..]][-w][-r|-x|-z][-n][-I][-s FRAME|CEC|MM|IVM|RSA|HMC|CMM|IMM2|FSP]
-             [-u] [--range IPranges][-t tries][--vpdtable][-C counts][-T timeout]",
+             [-t tries][--vpdtable][-C counts][-T timeout][--flexdiscover]",
  "rflash" =>
 "Usage: 
    rflash [ -h|--help|-v|--version]
@@ -335,31 +317,17 @@ my %usage = (
    renergy noderange [-V] { all | { [savingstatus] [dsavingstatus] [cappingstatus] [cappingmaxmin] [cappingvalue] [cappingsoftmin] [averageAC] [averageDC] [ambienttemp] [exhausttemp] [CPUspeed] [syssbpower] [sysIPLtime] [fsavingstatus] [ffoMin] [ffoVmin] [ffoTurbo] [ffoNorm] [ffovalue] } }
    renergy noderange [-V] { {savingstatus}={on | off} | {dsavingstatus}={on-norm | on-maxp | off} | {fsavingstatus}={on | off} | {ffovalue}=MHZ | {cappingstatus}={on | off} | {cappingwatt}=watt | {cappingperc}=percentage }

-    BladeCenter specific :
-      For Management Modules:
-        renergy noderange [-V] { all | pd1all | pd2all | [pd1status] [pd2status] [pd1policy] [pd2policy] [pd1powermodule1] [pd1powermodule2] [pd2powermodule1] [pd2powermodule2] [pd1avaiablepower] [pd2avaiablepower] [pd1reservedpower] [pd2reservedpower] [pd1remainpower] [pd2remainpower] [pd1inusedpower] [pd2inusedpower] [availableDC] [averageAC] [thermaloutput] [ambienttemp] [mmtemp] }
-      For a blade server nodes:
-        renergy noderange [-V] { all | [averageDC] [capability] [cappingvalue] [CPUspeed] [maxCPUspeed] [savingstatus] [dsavingstatus] }
-        renergy noderange [-V] { savingstatus={on | off} | dsavingstatus={on-norm | on-maxp | off} }
- 
-    Flex specific :
-      For Flex Management Modules:
-        renergy noderange [-V] { all | [powerstatus] [powerpolicy] [powermodule] [avaiablepower] [reservedpower] [remainpower] [inusedpower] [availableDC] [averageAC] [thermaloutput] [ambienttemp] [mmtemp] }
- 
-      For Flex node (power and x86):
-        renergy noderange [-V] { all | [averageDC] [capability] [cappingvalue] [cappingmaxmin] [cappingmax] [cappingmin] [cappingGmin] [CPUspeed] [maxCPUspeed] [savingstatus] [dsavingstatus] }
-        renergy noderange [-V] { cappingstatus={on | off} | cappingwatt=watt | cappingperc=percentage | savingstatus={on | off} | dsavingstatus={on-norm | on-maxp | off} }
- 
-    iDataPlex specific :
-      renergy noderange [-V] [ { cappingmaxmin | cappingmax | cappingmin } ] [cappingstatus] [cappingvalue] [relhistogram]
-      renergy noderange [-V] { cappingstatus={on | enable | off | disable} | {cappingwatt|cappingvalue}=watt }",
+    Blade specific :
+    renergy noderange [-V] { all | pd1all | pd2all | { [pd1status] [pd2status] [pd1policy] [pd2policy] [pd1powermodule1] [pd1powermodule2] [pd2powermodule1] [pd2powermodule2] [pd1avaiablepower] [pd2avaiablepower] [pd1reservedpower] [pd2reservedpower] [pd1remainpower] [pd2remainpower] [pd1inusedpower] [pd2inusedpower] [availableDC] [averageAC] [thermaloutput] [ambienttemp] [mmtemp] } }
+    renergy noderange [-V] { all | { [averageDC] [capability] [cappingvalue] [CPUspeed] [maxCPUspeed] [savingstatus] [dsavingstatus] } }
+    renergy noderange [-V] { {savingstatus}={on | off} | {dsavingstatus}={on-norm | on-maxp | off} }",
  "updatenode" =>
 "Usage:
-    updatenode [-h|--help|-v|--version | -g|--genmypost]
+    updatenode [-h|--help|-v|--version]
    or
-    updatenode <noderange> [-V|--verbose] [-k|--security] [-s|--sn] [-t <timeout>]
+    updatenode <noderange> [-V|--verbose] [-k|--security] [-s|--sn]
    or
-    updatenode <noderange> [-V|--verbose] [-F|--sync | -f|--snsync] [-l|--user[username]] [--fanout=[fanout value]] [-S|--sw] [-t <timeout>]
+    updatenode <noderange> [-V|--verbose] [-F|--sync | -f|--snsync] [-l|--user[username]] [--fanout=[fanout value]] [-S|--sw] 
        [-P|--scripts [script1,script2,...]] [-s|--sn] 
        [-A|--updateallsw] [-c|--cmdlineonly] [-d alt_source_dir]
        [attr=val [attr=val...]]
@@ -380,9 +348,6 @@ Options:
    [-f|--snsync] Performs File Syncing to the service nodes that service 
        the nodes in the noderange.

-    [-g|--genmypost] Will generate a new mypostscript file for the  
-        the nodes in the noderange, if site precreatemypostscripts is 1 or YES.
-
    [-l|--user] User name to run the updatenode command.  It overrides the
        current user which is the default.

@@ -396,9 +361,6 @@ Options:

    [-s|--sn] Set the server information stored on the nodes.

-    [-t|--timeout] Time out in seconds to allow the command to run. Default is no timeout,
-        except for updatenode -k which has a 10 second default timeout.
-
    [-A|--updateallsw] Install or update all software contained in the source 
        directory. (AIX only)

@@ -21,13 +21,10 @@ use File::Path;
 use Socket;
 use strict;
 use Symbol;
-my $sha1support;
-if ( -f "/etc/debian_version" ){
-    $sha1support = eval {require Digest::SHA; 1;};
-}
-else {
-    $sha1support = eval { require Digest::SHA1; 1;};
-}
+my $sha1support = eval {
+	require Digest::SHA1;
+	1;
+};
 use IPC::Open3;
 use IO::Select;
 use xCAT::GlobalDef;
@@ -179,13 +176,7 @@ sub genUUID
        return $uuid;
    } elsif ($args{url} and $sha1support) { #generate a UUIDv5 from URL
        #6ba7b810-9dad-11d1-80b4-00c04fd430c8 is the uuid for URL namespace
-        my $sum = '';
-        if ( -f "/etc/debian_version" ){
-            $sum = Digest::SHA::sha1('6ba7b810-9dad-11d1-80b4-00c04fd430c8'.$args{url});
-        }
-        else{
-            $sum = Digest::SHA1::sha1('6ba7b810-9dad-11d1-80b4-00c04fd430c8'.$args{url});
-        }
+        my $sum = Digest::SHA1::sha1('6ba7b810-9dad-11d1-80b4-00c04fd430c8'.$args{url});
        my @data = unpack("C*",$sum);
        splice @data,16;
        $data[6] = $data[6] & 0xf;
@@ -940,15 +931,18 @@ sub runcmd
    my ($class, $cmd, $exitcode, $refoutput, $stream) = @_;
    $::RUNCMD_RC = 0;
    # redirect stderr to stdout
-   
    if (!($cmd =~ /2>&1$/)) { $cmd .= ' 2>&1'; }   
-    my $hostname = `/bin/hostname`;
-    chomp $hostname;

-
-    if ($::VERBOSE)
-	 {
-      my $msg="Running command on $hostname: $cmd";
+	if ($::VERBOSE)
+	{
+		# get this systems name as known by xCAT management node
+		my $Sname = xCAT::InstUtils->myxCATname();
+		my $msg;
+		if ($Sname) {
+			$msg = "Running command on $Sname: $cmd";
+		} else {
+			$msg="Running command: $cmd";
+		}

 		if ($::CALLBACK){
 			my $rsp    = {};
@@ -957,7 +951,7 @@ sub runcmd
 		} else {
 			xCAT::MsgUtils->message("I", "$msg\n");
 		}
-	 }
+	}

    my $outref = [];
    if (!defined($stream) || (length($stream) == 0)) { # do not stream
@@ -1313,10 +1307,6 @@ sub runxcmd_output
    {
        push @$::xcmd_outref, @{$resp->{data}};
    }
-    if (defined($resp->{status}))
-    {
-        push @$::xcmd_outref, @{$resp->{status}};
-    }
    if (defined($resp->{node}))
    {
        my $node = $resp->{node}->[0];
@@ -1388,10 +1378,6 @@ sub runxcmd_output2
    {
        push  @{$::xcmd_outref_hash->{data}},  @{$resp->{data}};
    }
-    if (defined($resp->{status}))
-    {
-        push  @{$::xcmd_outref_hash->{status}},  @{$resp->{status}};
-    }
    if (defined($resp->{node}))
    {
        push  @{$::xcmd_outref_hash->{node}},  @{$resp->{node}};
@@ -3148,30 +3134,26 @@ sub noderangecontainsMn
 {
 my ($class, @noderange)=@_;
 # check if any node in the noderange is the Management Node return the
- # name
- my @mnames; # management node names in the database, members of __mgmtnode
+ # name 
+ my $mname;
 my $tab = xCAT::Table->new('nodelist');
 my @nodelist=$tab->getAllNodeAttribs(['node','groups']);
 foreach my $n (@nodelist) {
  if (defined($n->{'groups'})) {
   my @groups=split(",",$n->{'groups'});
   if ((grep (/__mgmtnode/,@groups))) {  # this is the MN
-     push @mnames,$n->{'node'};
+      $mname=$n->{'node'};
+      last;
   }
  }
 }
- my @MNs;  # management node names found the noderange
- if (@mnames) { # if any Management Node defined in the database
-   foreach my $mn (@mnames) {
-     if (grep(/^$mn$/, @noderange)) { # if  MN in the noderange
-       push @MNs, $mn;
-     }
-   }
-   if (@MNs) { # management nodes in the noderange
-       return @MNs;
+ if ($mname) {  # if Management Node defined in the database
+   if (grep(/$mname/, @noderange)) { # if MN in the noderange
+     return $mname;
+    } else {
+     return ;
   }
 }
- return;   # if no MN in the noderange, return nothing
 }

 =head3  filter_nodes
@@ -3222,11 +3204,6 @@ sub filter_nodes{
    if ($ipmitab) {
        $ipmitabhash = $ipmitab->getNodesAttribs(\@nodes,['bmc']);
    }
-    my $nodehmhash;
-    my $nodehmtab = xCAT::Table->new("nodehm");
-    if ($nodehmtab) {
-        $nodehmhash = $nodehmtab->getNodesAttribs(\@nodes,['mgt']);
-    }

    my (@mp, @ngpfsp, @ngpbmc, @commonfsp, @commonbmc, @unknow);

@@ -3236,15 +3213,6 @@ sub filter_nodes{
    # if only in 'ipmi', a common x86 node
    foreach (@nodes) {
        if (defined ($mptabhash->{$_}->[0]) && defined ($mptabhash->{$_}->[0]->{'mpa'})) {
-            if ($mptabhash->{$_}->[0]->{'mpa'} eq $_) {
-                if (defined($nodehmhash->{$_}->[0]) && defined($nodehmhash->{$_}->[0]->{'mgt'}) && 
-                    $nodehmhash->{$_}->[0]->{'mgt'} eq "blade") {
-                    push @mp, $_;
-                } else {
-                    push @unknow, $_;
-                }
-                next;
-            } 
            if (defined ($ppctabhash->{$_}->[0]) && defined ($ppctabhash->{$_}->[0]->{'hcp'})) {
              # flex power node
              push @ngpfsp, $_;
@@ -3276,21 +3244,18 @@ sub filter_nodes{
    if (@args && ($cmd eq "rspconfig")) {
        if (!(grep /^(cec_off_policy|pending_power_on_side)/, @args))  {
            push @{$mpnodes}, @ngpfsp;
+            if (grep /^(network=)/, @args) {
+                push @{$mpnodes}, @ngpbmc;
+            }    
        } else {
            push @{$fspnodes}, @ngpfsp;
        }
-        if (grep /^(network|textid)/, @args) {
-            push @{$mpnodes}, @ngpbmc;
-        } else {
-            push @{$bmcnodes}, @ngpbmc;
-        } 
    } elsif($cmd eq "getmacs") {
        if (@args && (grep /^-D$/,@args)) {
          push @{$fspnodes}, @ngpfsp;
        } else { 
          push @{$mpnodes}, @ngpfsp;
        }
-        push @{$mpnodes}, @ngpbmc;
    } elsif ($cmd eq "rvitals") {
        if (@args && (grep /^lcds$/,@args)) {
            push @{$fspnodes},@ngpfsp;
@@ -3298,11 +3263,7 @@ sub filter_nodes{
            push @{$mpnodes}, @ngpfsp;
        }
    } elsif ($cmd eq "renergy") {
-        if (grep /^(relhistogram)/, @args) {
-            push @{$bmcnodes}, @ngpbmc;
-        } else {
-            push @{$mpnodes}, @ngpbmc;
-        }
+        push @{$mpnodes}, @ngpbmc;
        push @{$mpnodes}, @ngpfsp;
    } else {
      push @{$fspnodes}, @ngpfsp;
@@ -3314,206 +3275,4 @@ sub filter_nodes{
    return 0;
 }

-#-------------------------------------------------------------------------------
-=head3   filter_nostatusupdate() 
-     
-    filter out the nodes which support provision status feedback from the status-nodes hash
-    Returns:
-       returns the filtered status-nodes hash
-    Globals:
-        none
-    Error:
-        none
-    Input:
-      the ref of status-nodes hash to filter
-    Example:
-    my $mn=xCAT::Utils->filter_nostatusupdate(\%statusnodehash);
-    Comments:
-=cut
-#-------------------------------------------------------------------------------
-sub filter_nostatusupdate{
-
-    my ($class,$inref)=@_;
-    my $nttabdata;
-    my @allnodes=();
-    #read "nodetype" table to get the "os" attribs for all the nodes with status "installing" or "netbooting" 
-    if(exists $inref->{$::STATUS_INSTALLING}){
-      push @allnodes, @{$inref->{$::STATUS_INSTALLING}};
-    }
-    if(exists $inref->{$::STATUS_NETBOOTING}){
-      push @allnodes, @{$inref->{$::STATUS_NETBOOTING}};
-    }
-
-    my $nodetypetab = xCAT::Table->new('nodetype');
-    if ($nodetypetab) {
-           $nttabdata     = $nodetypetab->getNodesAttribs(\@allnodes, ['node', 'os']);
-           $nodetypetab->close();
-    }    
-    
-    #filter out the nodes which support the node provision status feedback
-    my @nodesfiltered=();
-    if(exists $inref->{$::STATUS_INSTALLING}){
-      map{ if($nttabdata->{$_}->[0]->{os} !~ /(fedora|rh|centos|sles|ubuntu)/) {push @nodesfiltered,$_;} } @{$inref->{$::STATUS_INSTALLING}};
-      delete $inref->{$::STATUS_INSTALLING};
-      if(@nodesfiltered){
-        @{$inref->{$::STATUS_INSTALLING}}=@nodesfiltered;
-      }
-    }
-    
-    @nodesfiltered=();
-    if(exists $inref->{$::STATUS_NETBOOTING}){
-      map{ if($nttabdata->{$_}->[0]->{os} !~ /(fedora|rh|centos|sles|ubuntu)/) {push @nodesfiltered,$_;} } @{$inref->{$::STATUS_NETBOOTING}};
-      delete $inref->{$::STATUS_NETBOOTING};
-      if(@nodesfiltered){
-        @{$inref->{$::STATUS_NETBOOTING}}=@nodesfiltered;
-      }
-    }
-     
-}
-
-sub version_cmp {
-    my $ver_a = shift;
-    if ($ver_a =~ /xCAT::Utils/)
-    {
-        $ver_a = shift;
-    }
-    my $ver_b = shift;
-    my @array_a = ($ver_a =~ /([-.]|\d+|[^-.\d]+)/g);
-    my @array_b = ($ver_b =~ /([-.]|\d+|[^-.\d]+)/g);
-
-    my ($a, $b);
-    my $len_a = @array_a;
-    my $len_b = @array_b;
-    my $len = $len_a;
-    if ( $len_b < $len_a ) {
-        $len = $len_b;
-    }
-    for ( my $i = 0; $i < $len; $i++ ) {
-        $a = $array_a[$i];
-        $b = $array_b[$i];
-        if ($a eq $b) {
-            next;
-        } elsif ( $a eq '-' ) {
-            return -1;
-        } elsif ( $b eq '-') {
-            return 1;
-        } elsif ( $a eq '.' ) {
-            return -1;
-        } elsif ( $b eq '.' ) {
-            return 1;
-        } elsif ($a =~ /^\d+$/ and $b =~ /^\d+$/) {
-            if ($a =~ /^0/ || $b =~ /^0/) {
-                return ($a cmp $b);
-            } else {
-                return ($a <=> $b);
-            }
-        } else {
-            $a = uc $a;
-            $b = uc $b;
-            return ($a cmp $b);
-        }
-    }
-    return ( $len_a <=> $len_b )
-}
-
-
-#--------------------------------------------------------------------------------
-
-=head3    fullpathbin
-    returns the full path of a specified binary executable file
-    Arguments:
-      string of the bin file name
-    Returns:
-      string of the full path name of the binary executable file
-    Globals:
-        none
-    Error:
-      string of the bin file name in the argument
-    Example:
-         my $CHKCONFIG = xCAT::Utils->fullpathbin("chkconfig");
-    Comments:
-        none
-=cut
-
-#--------------------------------------------------------------------------------
-sub fullpathbin
-{
-  my $bin=shift;
-  if( $bin =~ /xCAT::Utils/)
-  {
-     $bin=shift;
-  }
-
-  my @paths= ("/bin","/usr/bin","/sbin","/usr/sbin");
-  my $fullpath=$bin;
-
-  foreach my $path (@paths)
-  {
-     if (-x $path.'/'.$bin)
-     {
-        $fullpath= $path.'/'.$bin;
-        last;
-     }
-  }
-
-  return $fullpath;
-}
-
-#--------------------------------------------------------------------------------
-
-=head3   gettimezone 
-    returns the name of the timezone defined on the Linux distro. 
-    This routine was written to replace the use of /etc/sysconfig/clock which in no
-    longer supported on future Linux releases such as RHEL7.  It is suppose to be a routine
-    that can find the timezone on any Linux OS or AIX. 
-    Arguments:
-      none 
-    Returns:
-      Name of timezone,  for example US/Eastern 
-    Globals:
-        none
-    Error:
-      None 
-    Example:
-         my $timezone = xCAT::Utils->gettimezone();
-    Comments:
-        none
-=cut
-
-#--------------------------------------------------------------------------------
-sub gettimezone 
-{
-  my ($class) = @_;
-
-  my $tz;
-  if (xCAT::Utils->isAIX()) {
-    $tz= $ENV{'TZ'};
-  } else {   # all linux 
-        my $localtime = "/etc/localtime";
-        my $zoneinfo = "/usr/share/zoneinfo";
-        my $cmd = "find $zoneinfo -type f -exec cmp -s $localtime {} \\; -print | grep -v posix | grep -v SystemV";
-        my $zone_result = xCAT::Utils->runcmd("$cmd", 0);
-        if ($::RUNCMD_RC != 0)
-        {
-           $tz="Could not determine timezone checksum"; 
-            return $tz;
-        }
-        my @zones = split /\n/, $zone_result;
-
-        $zones[0] =~ s/$zoneinfo\///;
-        if (!$zones[0]) {  # if we still did not get one, then default
-                $tz = `cat /etc/timezone`;
-                chomp $tz;
-        } else {
-             $tz=$zones[0];
-        }
-
-
-  }
-  return $tz;
-
-
-}
-
-
 1;
@@ -26,7 +26,7 @@ sub grab_table_data{ #grab table data relevent to VM guest nodes
  if ($vpdtab) {
      $cfghash->{vpd} = $vpdtab->getNodesAttribs($noderange,['uuid']);
  }
-  $cfghash->{vm} = $vmtab->getNodesAttribs($noderange,['node','host','migrationdest','cfgstore','storage','storagecache','storageformat','vidmodel','vidproto','vidpassword','storagemodel','memory','cpus','nics','nicmodel','bootorder','virtflags','datacenter','guestostype','othersettings','master']);
+  $cfghash->{vm} = $vmtab->getNodesAttribs($noderange,['node','host','migrationdest','cfgstore','storage','vidmodel','vidproto','vidpassword','storagemodel','memory','cpus','nics','nicmodel','bootorder','virtflags','datacenter','guestostype','othersettings','master']);
  my $mactab = xCAT::Table->new("mac",-create=>1);
  my $nrtab= xCAT::Table->new("noderes",-create=>1);
  $cfghash->{mac} = $mactab->getAllNodeAttribs(['mac'],1);
@@ -1,452 +0,0 @@
-#!/usr/bin/env perl
-# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
-package xCAT::Zone;
-
-BEGIN
-{
-    $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : '/opt/xcat';
-}
-
-# if AIX - make sure we include perl 5.8.2 in INC path.
-#       Needed to find perl dependencies shipped in deps tarball.
-if ($^O =~ /^aix/i) {
-	unshift(@INC, qw(/usr/opt/perl5/lib/5.8.2/aix-thread-multi /usr/opt/perl5/lib/5.8.2 /usr/opt/perl5/lib/site_perl/5.8.2/aix-thread-multi /usr/opt/perl5/lib/site_perl/5.8.2));
-}
-
-use lib "$::XCATROOT/lib/perl";
-# do not put a use or require for  xCAT::Table here. Add to each new routine
-# needing it to avoid reprocessing of user tables ( ExtTab.pm) for each command call 
-use POSIX qw(ceil);
-use File::Path;
-use Socket;
-use strict;
-use Symbol;
-use warnings "all";
-
-#--------------------------------------------------------------------------------
-
-=head1    xCAT::Zone
-
-=head2    Package Description
-
-This program module file, is a set of Zone utilities used by xCAT *zone commands.
-
-=cut
-
-
-#--------------------------------------------------------------------------------
-
-=head3    genSSHRootKeys 
-    Arguments:
-      callback for error messages 
-      directory in which to put the ssh RSA keys 
-      zonename 
-      rsa private key to use for generation ( optional)
-    Returns:
-    Error:  1 - key generation failure.
-    Example:
-     $rc =xCAT::Zone->genSSHRootKeys($callback,$keydir,$rsakey); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub genSSHRootKeys 
-{
-    my ($class, $callback, $keydir,$zonename,$rsakey) = @_;
-    
-    #
-    # create /keydir if needed
-    #
-    if (!-d $keydir)
-    {
-        my $cmd = "/bin/mkdir -m 700 -p $keydir";
-        my $output = xCAT::Utils->runcmd("$cmd", 0);
-        if ($::RUNCMD_RC != 0)
-        {
-           my $rsp = {};
-           $rsp->{error}->[0] =
-             "Could not create $keydir directory";
-           xCAT::MsgUtils->message("E", $rsp, $callback);
-           return 1;
-
-        }
-    }
-
-
-    #need to gen a new rsa key for root for the zone 
-    my $pubfile = "$keydir/id_rsa.pub";
-    my $pvtfile = "$keydir/id_rsa";
-
-    # if exists, remove the old files 
-    if (-r $pubfile)
-    {
-
-        my $cmd = "/bin/rm $keydir/id_rsa*";
-        my $output = xCAT::Utils->runcmd("$cmd", 0);
-        if ($::RUNCMD_RC != 0)
-        {
-            my $rsp = {};
-            $rsp->{error}->[0] = "Could not remove id_rsa files from $keydir directory.";
-            xCAT::MsgUtils->message("E", $rsp, $callback);
-            return 1;
-        }
-    }
-
-    # gen new RSA keys 
-    my $cmd;
-    my $output;
-    # if private key was input use it
-    if (defined ($rsakey))  {
-      $cmd="/usr/bin/ssh-keygen -y -f $rsakey > $pubfile";
-      $output = xCAT::Utils->runcmd("$cmd", 0);
-      if ($::RUNCMD_RC != 0)
-      {
-            my $rsp = {};
-            $rsp->{error}->[0] = "Could not generate $pubfile from $rsakey";
-            xCAT::MsgUtils->message("E", $rsp, $callback);
-            return 1;
-      }
-      # now copy the private key into the directory
-      $cmd="cp $rsakey  $keydir";
-      $output = xCAT::Utils->runcmd("$cmd", 0);
-      if ($::RUNCMD_RC != 0)
-      {
-            my $rsp = {};
-            $rsp->{error}->[0] = "Could not run $cmd";
-            xCAT::MsgUtils->message("E", $rsp, $callback);
-            return 1;
-      }
-    } else {  # generate all new keys
-      $cmd = "/usr/bin/ssh-keygen -t rsa -q -b 2048 -N '' -f $pvtfile";
-      $output = xCAT::Utils->runcmd("$cmd", 0);
-      if ($::RUNCMD_RC != 0)
-     {
-            my $rsp = {};
-            $rsp->{error}->[0] = "Could not generate $pubfile";
-            xCAT::MsgUtils->message("E", $rsp, $callback);
-            return 1;
-     }
-    }
-    #make sure permissions are correct
-    $cmd = "chmod 644 $pubfile;chown root $pubfile";
-    $output = xCAT::Utils->runcmd("$cmd", 0);
-    if ($::RUNCMD_RC != 0)
-    {
-            my $rsp = {};
-            $rsp->{error}->[0] = "Could set permission and owner on  $pubfile";
-            xCAT::MsgUtils->message("E", $rsp, $callback);
-            return 1;
-    }
-}
-#--------------------------------------------------------------------------------
-
-=head3    getdefaultzone 
-    Arguments:
-      None 
-    Returns:
-    Name of the current default  zone from the zone table
-    Example:
-     my $defaultzone =xCAT::Zone->getdefaultzone($callback); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub getdefaultzone 
-{
- my ($class, $callback) = @_;
- my $defaultzone;
- # read all the zone table and find the defaultzone, if it exists
- my $tab = xCAT::Table->new("zone");
- if ($tab){
-   my @zones = $tab->getAllAttribs('zonename','defaultzone');
-   foreach my $zone (@zones) {
-    # Look for the  defaultzone=yes/1 entry
-    if ((defined($zone->{defaultzone})) && 
-          (($zone->{defaultzone} =~ /^yes$/i )
-           || ($zone->{defaultzone} eq "1"))) {
-       $defaultzone = $zone->{zonename};
-    }
-    $tab->close();
-   }
- } else {
-    my $rsp = {};
-    $rsp->{error}->[0] = 
-    "Error reading the zone table. ";
-    xCAT::MsgUtils->message("E", $rsp, $callback);
-
- }
- return $defaultzone;
-}
-#--------------------------------------------------------------------------------
-
-=head3    iszonedefined 
-    Arguments:
-      zonename 
-    Returns:
-     1 if the zone is already in the zone table.
-    Example:
-     xCAT::Zone->iszonedefined($zonename); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub iszonedefined 
-{
- my ($class,$zonename) = @_;
- # checks the zone table to see if input zonename already in the table 
- my $tab = xCAT::Table->new("zone");
- $tab->close();
- my $zonehash = $tab->getAttribs({zonename => $zonename},'sshkeydir');
- if ( keys %$zonehash) {
-    return 1;
- }else{
-    return 0;
- }
-}
-#--------------------------------------------------------------------------------
-
-=head3  getzonekeydir 
-    Arguments:
-      zonename 
-    Returns:
-     path to the root ssh keys for the zone /etc/xcat/sshkeys/<zonename>/.ssh 
-     1 - zone not defined 
-    Example:
-     xCAT::Zone->getzonekeydir($zonename); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub getzonekeydir 
-{
- my ($class,$zonename) = @_;
- my $tab = xCAT::Table->new("zone");
- $tab->close();
- my $zonehash = $tab->getAttribs({zonename => $zonename},'sshkeydir');
- if ( keys %$zonehash) {
-    my $zonesshkeydir=$zonehash->{sshkeydir};
-    return $zonesshkeydir;
- }else{
-    return 1;   # this is a bad error  zone not defined
- }
-}
-#--------------------------------------------------------------------------------
-
-=head3    getmyzonename 
-    Arguments:
-       $node -one nodename      
-    Returns:
-     $zonename 
-    Example:
-     my $zonename=xCAT::Zone->getmyzonename($node); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub getmyzonename 
-{
- my ($class,$node,$callback) = @_;
- my @node;
- push @node,$node;
- my $zonename;
- my $nodelisttab = xCAT::Table->new("nodelist");
- my $nodehash = $nodelisttab->getNodesAttribs(\@node, ['zonename']); 
- $nodelisttab->close();
- if ( defined ($nodehash->{$node}->[0]->{zonename})) { # it was defined in the nodelist table
-    $zonename=$nodehash->{$node}->[0]->{zonename};
- } else {  # get the default zone
-    $zonename =xCAT::Zone->getdefaultzone($callback);
- }
-   return $zonename;
-}
-#--------------------------------------------------------------------------------
-
-=head3    enableSSHbetweennodes 
-    Arguments:
-      zonename 
-    Returns:
-     1 if the  sshbetweennodes attribute is yes/1 or undefined
-     0 if the  sshbetweennodes attribute is no/0 
-    Example:
-     xCAT::Zone->enableSSHbetweennodes($zonename); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub enableSSHbetweennodes 
-{
- my ($class,$node,$callback) = @_;
- # finds the zone of the node
- my $enablessh = 1;   # default
- my $zonename=xCAT::Zone->getmyzonename($node);
- # reads the zone table 
- my $tab = xCAT::Table->new("zone");
- $tab->close();
- # read both keys,  want to know zone is in the zone table. If sshkeydir is not there
- # it is either missing or invalid anyway
- my $zonehash = $tab->getAttribs({zonename => $zonename},'sshbetweennodes','sshkeydir');
- if (! ( keys %$zonehash)) {
-          my $rsp = {};
-          $rsp->{error}->[0] = 
-         "$node has a  zonename: $zonename that is  not define in the zone table. Remove the zonename from the node, or create the zone using mkzone. The generated mypostscript may not reflect the correct setting for  ENABLESSHBETWEENNODES";
-          xCAT::MsgUtils->message("E", $rsp, $callback);
-          return $enablessh;
- }
- my $sshbetweennodes=$zonehash->{sshbetweennodes};
- if (defined ($sshbetweennodes)) {
-   if (($sshbetweennodes  =~ /^no$/i) ||  ($sshbetweennodes eq "0")) {
-     $enablessh = 0;  
-   } else {
-     $enablessh = 1;  
-   }
- } else { # not defined default yes
-   $enablessh = 1 ;   # default
- }
- return $enablessh;
-}
-#--------------------------------------------------------------------------------
-
-=head3    usingzones 
-    Arguments:
-      none 
-    Returns:
-     1 if the zone table is not empty
-     0 if empty
-    Example:
-     xCAT::Zone->usingzones; 
-=cut
-
-#--------------------------------------------------------------------------------
-sub usingzones 
-{
- my ($class) = @_;
- # reads the zonetable 
- my $tab = xCAT::Table->new("zone");
- my  @zone = $tab->getAllAttribs('zonename');
- $tab->close();
- if (@zone) {
-    return 1;
- }else{
-    return 0;
- }
-}
-#--------------------------------------------------------------------------------
-
-=head3    getzoneinfo
-    Arguments:
-     callback
-     An array of nodes
-    Returns:
-     Hash array  by zonename point to the nodes in that zonename  and sshkeydir
-      <zonename1> -> {nodelist} -> array of nodes in the zone
-                 -> {sshkeydir} -> directory containing ssh RSA keys
-                 -> {defaultzone} ->  is it the default zone             
-    Example:
-     my %zonehash =xCAT::Zone->getzoneinfo($callback,@nodearray); 
-    Rules:
-       If the nodes nodelist.zonename attribute is a zonename, it is assigned to that zone
-       If the nodes nodelist.zonename attribute is undefined:
-          If there is a defaultzone in the zone table, the node is assigned to that zone
-          If there is no defaultzone in the zone table, the node is assigned to the ~.ssh keydir
-    $::GETZONEINFO_RC
-           0 = good return
-           1 = error occured
-=cut
-
-#--------------------------------------------------------------------------------
-sub getzoneinfo 
-{
-  my ($class, $callback,$nodes) = @_;
- $::GETZONEINFO_RC=0; 
- my $zonehash;
- my $defaultzone;
- # read all the zone table 
- my $zonetab = xCAT::Table->new("zone");
- my @zones;
- if ($zonetab){
-    @zones = $zonetab->getAllAttribs('zonename','sshkeydir','sshbetweennodes','defaultzone');
-    $zonetab->close();
-    if (@zones) {
-       foreach  my $zone (@zones) {
-          my $zonename=$zone->{zonename};
-          $zonehash->{$zonename}->{sshkeydir}= $zone->{sshkeydir};
-          $zonehash->{$zonename}->{defaultzone}= $zone->{defaultzone};
-          $zonehash->{$zonename}->{sshbetweennodes}= $zone->{sshbetweennodes};
-          # find the defaultzone
-          if ((defined($zone->{defaultzone})) &&
-          (($zone->{defaultzone} =~ /^yes$/i ) 
-              || ($zone->{defaultzone} eq "1"))) {
-              $defaultzone = $zone->{zonename};
-          }
-       }
-    }
- } else {
-    my $rsp = {};
-    $rsp->{error}->[0] = 
-    "Error reading the zone table. ";
-    xCAT::MsgUtils->message("E", $rsp, $callback);
-    $::GETZONEINFO_RC =1;
-    return;
-
- }
- my $nodelisttab = xCAT::Table->new("nodelist");
- my $nodehash = $nodelisttab->getNodesAttribs(\@$nodes, ['zonename']); 
- # for each of the nodes, look up it's zone name and assign to the zonehash
- # If the nodes nodelist.zonename attribute is a zonename, it is assigned to that zone
- # If the nodes nodelist.zonename attribute is undefined:
- #         If there is a defaultzone in the zone table, the node is assigned to that zone
- #         If there is no defaultzone error out 
- 
-
- foreach my $node (@$nodes) {
-    my $zonename;
-    $zonename=$nodehash->{$node}->[0]->{zonename};
-    if (defined($zonename)) {  # zonename explicitly defined in nodelist.zonename
-     # check to see if defined in the zone table
-     unless ( xCAT::Zone->iszonedefined($zonename)) {
-          my $rsp = {};
-          $rsp->{error}->[0] = 
-         "$node has a  zonename: $zonename that is  not define in the zone table. Remove the zonename from the node, or create the zone using mkzone.";
-          xCAT::MsgUtils->message("E", $rsp, $callback);
-          $::GETZONEINFO_RC =1;
-          return;
-      }
-      push @{$zonehash->{$zonename}->{nodes}},$node;
-    } else { # no explict zonename
-      if (defined ($defaultzone)) {  # there is a default zone in the zone table, use it
-       push @{$zonehash->{$defaultzone}->{nodes}},$node;
-      } else {  # if no default, this is an error
-          my $rsp = {};
-          $rsp->{error}->[0] = 
-         "There is no default zone defined in the zone table. There must be exactly one default zone. ";
-          xCAT::MsgUtils->message("E", $rsp, $callback);
-          $::GETZONEINFO_RC =1;
-          return;
-       
-      }   
-    }   
- }
- return $zonehash;
-}
-#--------------------------------------------------------------------------------
-
-=head3    getnodesinzone
-    Arguments:
-     callback
-     zonename 
-    Returns:
-     Array of nodes 
-    Example:
-     my @nodes =xCAT::Zone->getnodesinzone($callback,$zonename); 
-=cut
-
-#--------------------------------------------------------------------------------
-sub getnodesinzone 
-{
- my ($class, $callback,$zonename) = @_;
- my @nodes;
- my $nodelisttab = xCAT::Table->new("nodelist");
- my @nodelist=$nodelisttab->getAllAttribs('node','zonename');
- # build the array of nodes in this zone
- foreach my $nodename (@nodelist) {
-     if  ((defined($nodename->{'zonename'})) && ($nodename->{'zonename'} eq $zonename)) {
-       push @nodes,$nodename->{'node'};
-     }
- }
- return @nodes;
-}
-1;
@@ -14,10 +14,9 @@ require Exporter;

 %distnames = (
                 "1310229985.226287" => "centos6",
-                 "1323560292.885204" => "centos6.2",
-                 "1341569670.539525" => "centos6.3",#x86
-                 "1362445555.957609" => "centos6.4",#x86_64
-                 "1385726732.061157" => "centos6.5",#x86_64
+		 "1323560292.885204" => "centos6.2",
+		 "1341569670.539525" => "centos6.3",#x86
+		 "1362445555.957609" => "centos6.4",#x86_64
                 "1176234647.982657" => "centos5",
                 "1156364963.862322" => "centos4.4",
                 "1178480581.024704" => "centos4.5",
@@ -28,8 +27,6 @@ require Exporter;
                 "1237641529.260981" => "centos5.3",
                 "1272326751.405938" => "centos5.5",
                 "1330913492.861127" => "centos5.8",#x86_64
-                 "1357930415.252042" => "centos5.9",#x86_64
-                 "1381776971.473332" => "centos5.10",#x86_64
                 "1195488871.805863" => "centos4.6",
                 "1195487524.127458" => "centos4.6",
                 "1301444731.448392" => "centos5.6",
@@ -51,8 +48,6 @@ require Exporter;
                 "1328205744.315196" => "rhels5.8", #x86_64
                 "1354216429.587870" => "rhels5.9", #x86_64
                 "1354214009.518521" => "rhels5.9", #ppc64
-                 "1378846702.129847" => "rhels5.10", #x86_64
-                 "1378845049.643372" => "rhels5.10", #ppc64
                 "1285193176.460470" => "rhels6", #x86_64
                 "1285192093.430930" => "rhels6", #ppc64
                 "1305068199.328169" => "rhels6.1", #x86_64
@@ -64,14 +59,10 @@ require Exporter;
                 "1339638991.532890" => "rhels6.3", #i386
                 "1359576752.435900" => "rhels6.4", #x86_64
                 "1359576196.686790" => "rhels6.4", #ppc64
-                 "1384196515.415715" => "rhels6.5", #x86_64
-                 "1384198011.520581" => "rhels6.5", #ppc64
 		 "1285193176.593806" => "rhelhpc6", #x86_64
 		 "1305067719.718814" => "rhelhpc6.1",#x86_64				
 		 "1321545261.599847" => "rhelhpc6.2",#x86_64				
 		 "1339640148.070971" => "rhelhpc6.3",#x86_64				
-		 "1359576195.413831" => "rhelhpc6.4",#x86_64, RHEL ComputeNode
-		 "1384196516.465862" => "rhelhpc6.5",#x86_64, RHEL ComputeNode
                 "1194015916.783841" => "fedora8",
                 "1194015385.299901" => "fedora8",
                 "1210112435.291709" => "fedora9",
@@ -83,9 +74,7 @@ require Exporter;
                 "1273712675.937554" => "fedora13", #x86_64 DVD ISO
                 "1287685820.403779" => "fedora14", #x86_64 DVD ISO
                 "1305315870.828212" => "fedora15", #x86_64 DVD ISO
-                 "1372355769.065812" => "fedora19", #x86_64 DVD ISO
-                 "1372402928.663653" => "fedora19", #ppc64 DVD ISO
-                 "1386856788.124593" => "fedora20", #x86_64 DVD ISO
+
                 "1194512200.047708" => "rhas4.6",
                 "1194512327.501046" => "rhas4.6",
                 "1241464993.830723" => "rhas4.8", #x86-64
@@ -1,43 +0,0 @@
-#!/usr/bin/env perl
-# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
-
-package xCAT::data::ibmhwtypes;
-require Exporter;
-@EXPORT_OK=qw(parse_group mt2group);
-use Data::Dumper;
-my %groups2mtm = (
-    "x3250" => ["2583","4251","4252"],
-    "x3550" => ["7914","7944","7946"],
-    "x3650" => ["7915","7945"],
-    "dx360" => [],
-    "x220"  => ["7906"],
-    "x240"  => ["8737","7863"],
-    "x440"  => ["7917"],
-    "p260"  => ["7895"], #789522X, 789523X
-    "p460"  => [],       #789542X
-    "p470"  => ["7954"],
-);
-
-%mt2group = ();
-foreach my $group (keys %groups2mtm) {
-    foreach my $mtm (@{$groups2mtm{$group}}) {
-        $mt2group{$mtm} = $group;
-    }
-}
-
-sub parse_group {
-    my $mtm = shift;
-    if ($mtm =~ /xCAT::data/) {
-        $mtm = shift;
-    }
-    if ($mtm =~ /^(\w{4})/) {
-        $mt = $1;
-        if ($mt eq "7895" and $mtm =~ /789542X/i) {
-            return "p460";
-        }
-        return $mt2group{$mt};
-    }
-    return undef;
-}
-
-1;
@@ -208,7 +208,7 @@ sub getNic {
    Arguments   :   User (root or non-root)
                    Node
    Returns     : Network names
-    Example     : my $lans = xCAT::zvmCPUtils->getNetworkNames($user, $node);
+    Example     : my $lans = xCAT::zvmCPUtils->getNetworkNames($node);
    
 =cut

@@ -260,7 +260,7 @@ sub getNetworkNames {
    Arguments   :   User (root or non-root)
                    Node
    Returns     : Array of networks names
-    Example     : my @networks = xCAT::zvmCPUtils->getNetworkNamesArray($user, $node);
+    Example     : my @networks = xCAT::zvmCPUtils->getNetworkNamesArray($node);
    
 =cut

@@ -611,39 +611,25 @@ sub punch2Reader {
            
    # Punch to reader
    # VMUR located in different directories on RHEL and SLES
-    my $vmur;
-    if ( $os =~ m/sles10/i ) {
-        $vmur = "/sbin/vmur";
-    } else {
-        $vmur = "/usr/sbin/vmur";
-    }
    my $out;
-    my $done = 0;
-    
-    until ( $done ) {
-        $out = `ssh -o ConnectTimeout=5 $user\@$hcp "$sudo $vmur punch $options -u $userId -r $srcFile -N $tgtFile" 2>&1`;
-        my $rc = $? >> 8;
-        if ( $rc == 255 ) {
-            $out = "(Error) Unable to communicate with the zHCP system: $hcp";
-            $done = 1;
-        } elsif ( $out =~ m/A concurrent instance of vmur is already active/i ) {
-            # Recoverable error: retry the command after a delay
-            xCAT::zvmUtils->printSyslog( "punch2Reader() Punch in use on $hcp, retrying in 15 seconds" );
-            sleep( 15 );
-        } else {
-            # Punch appears successful -- Look for the completion string
-            my $searchStr = "created and transferred";
-            if ( !( $out =~ m/$searchStr/i ) ) {
-                chomp( $out );
-                $out = "Failed, punch info: '$out'\n";
-                xCAT::zvmUtils->printSyslog( "punch2Reader() Failed punching $srcFile to $userId from $hcp, info: '$out'" );
-            } else {
-                $out = "Done\n";
-            }
-            $done = 1;
-        }
+    if ( $os =~ m/sles10/i ) {
+        $out = `ssh -o ConnectTimeout=5 $user\@$hcp "$sudo /sbin/vmur punch $options -u $userId -r $srcFile -N $tgtFile"`;
+    } elsif ( $os =~ m/sles11/i ) {
+        $out = `ssh -o ConnectTimeout=5 $user\@$hcp "$sudo /usr/sbin/vmur punch $options -u $userId -r $srcFile -N $tgtFile"`;
+    } elsif ( $os =~ m/rhel/i ) {
+    	$out = `ssh -o ConnectTimeout=5 $user\@$hcp "$sudo /usr/sbin/vmur punch $options -u $userId -r $srcFile -N $tgtFile"`;
+    } else {
+    	$out = `ssh -o ConnectTimeout=5 $user\@$hcp "$sudo /usr/sbin/vmur punch $options -u $userId -r $srcFile -N $tgtFile"`;
    }
    
+    # If punch is successful -- Look for this string
+    my $searchStr = "created and transferred";
+    if ( !( $out =~ m/$searchStr/i ) ) {
+        $out = "Failed\n";
+    } else {
+        $out = "Done\n";
+    }
+
    return $out;
 }

@@ -6,275 +6,84 @@
 #include <stdlib.h>
 #include <errno.h>
 #include <netinet/in.h>
-#include <signal.h>
-#include <syslog.h>
-
-// the chunk size for each alloc 
-int chunknum = 200;
-int doreload = 0;
-int verbose = 0;
-char logmsg[50];
-
-// the struct to store the winpe configuration for each node
-struct nodecfg {
-    char node[50];
-    char data[150];
-};
-
-char *data = NULL; // the ptr to the array of all node config
-int nodenum = 0;
-
-// trigger the main program to reload configuration file
-void reload(int sig) {
-    doreload = 1;
-}
-// the subroutine which is used to load configuration from 
-// /var/lib/xcat/proxydhcp.cfg to *data
-void loadcfg () {
-    nodenum = 0;
-    free(data);
-    data = NULL;
-    doreload = 0;
-
-    char *dp = NULL;
-
-    FILE *fp;
-    fp = fopen("/var/lib/xcat/proxydhcp.cfg", "r");
-    if (fp) {
-        int num = chunknum;
-        int rtime = 1;
-        while (num == chunknum) {
-            // realloc the chunknum size of memory each to save memory usage
-            data = realloc(data, sizeof(struct nodecfg) * chunknum * rtime);
-            if (NULL == data) {
-                fprintf (stderr, "Cannot get enough memory.\n");
-                free (data);
-                return;
-            }
-            dp = data + sizeof(struct nodecfg) * chunknum * (rtime - 1);
-            memset(dp, 0, sizeof(struct nodecfg) * chunknum);
-            num = fread(dp, sizeof (struct nodecfg), chunknum, fp);
-            nodenum += num;
-            rtime++;
-        }
-        fclose(fp);
-    }
-}
-
-// get the path of winpe from configuration file which is stored in *data
-char *getwinpepath(char *node) {
-    int i;
-    struct nodecfg *nc = (struct nodecfg *)data;
-    for (i=0; i<nodenum;i++) {
-        if (0 == strcmp(nc->node, node)) {
-            return nc->data;
-        }
-        nc++;
-    }
-
-    return NULL;
-}
-
-    
-int main(int argc, char *argv[]) {
-    int i;
-    for(i = 0; i < argc; i++)
-    {
-        if (strcmp(argv[i], "-V") == 0) {
-            verbose = 1;
-            setlogmask(LOG_UPTO(LOG_DEBUG));
-            openlog("proxydhcp", LOG_NDELAY, LOG_LOCAL0);
-        }
-    }
-
-    // regist my pid to /var/run/xcat/proxydhcp.pid
-    int pid = getpid();
-    FILE *pidf = fopen ("/var/run/xcat/proxydhcp.pid", "w");
-    if (pidf) {
-        fprintf(pidf, "%d", pid);
-        fclose (pidf);
-    } else {
-        fprintf (stderr, "Cannot open /var/run/xcat/proxydhcp.pid\n");
-        return 1;
-    }
-
-    // load configuration at first start
-    loadcfg();
-
-    // regist signal SIGUSR1 for triggering reload configuration from outside
-    struct sigaction sigact;
-    sigact.sa_handler = &reload;
-    sigaction(SIGUSR1, &sigact, NULL);
-
-    int serverfd,port;
-    int getpktinfo = 1;
-    struct addrinfo hint, *res;
-    char cmsg[CMSG_SPACE(sizeof(struct in_pktinfo))];
-    char clientpacket[1024];
-    struct sockaddr_in clientaddr;
-    struct msghdr msg;
-    struct cmsghdr *cmsgptr;
-    struct iovec iov[1];
-    unsigned int myip, clientip;
-    char *txtptr;
-    iov[0].iov_base = clientpacket;
-    iov[0].iov_len = 1024;
-    memset(&msg,0,sizeof(msg));
-    memset(&clientaddr,0,sizeof(clientaddr));
-    msg.msg_name=&clientaddr;
-    msg.msg_namelen = sizeof(clientaddr);
-    msg.msg_iov = iov;
-    msg.msg_iovlen = 1;
-    msg.msg_control=&cmsg;
-    msg.msg_controllen = sizeof(cmsg);
-
-    char defaultwinpe[20] = "Boot/bootmgfw.efi";	
-    char bootpmagic[4] = {0x63,0x82,0x53,0x63};
-    int pktsize;
-    int doexit=0;
-    port = 4011;
-    memset(&hint,0,sizeof(hint));
-    hint.ai_family = PF_INET;  /* Would've done UNSPEC, but it doesn't work right and this is heavily v4 specific anyway */
-    hint.ai_socktype = SOCK_DGRAM;
-    hint.ai_flags = AI_PASSIVE;
-    getaddrinfo(NULL,"4011",&hint,&res);
-    serverfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
-    if (!serverfd) { fprintf(stderr,"That's odd...\n"); }
-    setsockopt(serverfd,IPPROTO_IP,IP_PKTINFO,&getpktinfo,sizeof(getpktinfo));
-    if (bind(serverfd,res->ai_addr ,res->ai_addrlen) < 0) {
-        fprintf(stderr,"Unable to bind 4011");
-        exit(1);
-    }
-
-
-    while (!doexit) {
-        // use select to wait for the 4011 request packages coming
-        fd_set fds;
-        FD_ZERO(&fds);
-        FD_SET(serverfd, &fds); 
-        struct timeval timeout;
-        timeout.tv_sec = 30;
-        timeout.tv_usec = 0;
-        
-        int rc;
-        if ((rc = select(serverfd+1,&fds,0,0, &timeout)) <= 0) {
-            if (doreload) {
-                loadcfg();
-                fprintf(stderr, "load in select\n");
-            }
-            if (verbose) {syslog(LOG_DEBUG, "reload /var/lib/xcat/proxydhcp.cfg\n");}
-            continue;
-        }
-        
-        if (doreload) {
-            loadcfg();
-            if (verbose) {syslog(LOG_DEBUG, "reload /var/lib/xcat/proxydhcp.cfg\n");}
-        }
-        
-        pktsize = recvmsg(serverfd,&msg,0);
-        if (pktsize < 320) {
-            continue;
-        }
-        if (clientpacket[0] != 1 || memcmp(clientpacket+0xec,bootpmagic,4)) {
-            continue;
-        }
-        for (cmsgptr = CMSG_FIRSTHDR(&msg); cmsgptr != NULL; cmsgptr = CMSG_NXTHDR(&msg,cmsgptr)) {
-            if (cmsgptr->cmsg_level == IPPROTO_IP && cmsgptr->cmsg_type == IP_PKTINFO) {
-                myip = ((struct in_pktinfo*)(CMSG_DATA(cmsgptr)))->ipi_addr.s_addr;
-            }
-        }
-        
-        // get the ip of dhcp client
-        clientip = 0;
-        int i;
-        for (i = 0; i< 4; i++) {
-            clientip = clientip << 8;
-            clientip += (unsigned char)clientpacket[15-i];
-        }
-        // get the winpe path
-        struct hostent *host = gethostbyaddr(&clientip, sizeof(clientip), AF_INET);
-        char *winpepath = defaultwinpe;
-        if (host) {
-            if (host->h_name) {
-                // remove the domain part from hostname
-                char *place = strstr(host->h_name, ".");
-                if (place) {
-                    *place = '\0';
-                }
-                
-                winpepath = getwinpepath(host->h_name);
-                if (winpepath == NULL) {
-                    winpepath = defaultwinpe;
-                }
-                if (verbose) {
-                    sprintf(logmsg, "Received proxydhcp request from %s\n", host->h_name);
-                    syslog(LOG_DEBUG, logmsg); 
-                }
-            }
-        } else {
-            winpepath = defaultwinpe;
-        }
-        
-        // get the Vendor class identifier
-        char *arch = NULL;
-        unsigned char *p = clientpacket + 0xf0;
-        while (*p != 0xff && p < (unsigned char *)clientpacket + pktsize) {
-            if (*p == 60) {
-                arch = p + 0x11;
-                break;
-            } else {
-                p += *(p+1) + 2;
-            }
-        }
-        
-        char winboot[50]; // the bootload of winpe
-        memset(winboot, 0, 50);
-        if (0 == memcmp(arch, "00000", 5)) {  // bios boot mode
-            strcpy(winboot, winpepath);
-            strcat(winboot, "Boot/pxeboot.0");
-        } else if (0 == memcmp(arch, "00007", 5)) {  // uefi boot mode
-            strcpy(winboot, winpepath);
-            strcat(winboot, "Boot/bootmgfw.efi");
-        }
-
-        clientpacket[0] = 2; //change to a reply
-        myip = htonl(myip); //endian neutral change
-        clientpacket[0x14] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better
-        clientpacket[0x15] = (myip>>16)&0xff;
-        clientpacket[0x16] = (myip>>8)&0xff;
-        clientpacket[0x17] = (myip)&0xff;
-        txtptr = clientpacket+0x6c;
-        strncpy(txtptr, winboot ,128); // keeping 128 in there just in case someone changes the string
-        //strncpy(txtptr,"winboot/new/Boot/bootmgfw.efi",128); // keeping 128 in there just in case someone changes the string
-        //strncpy(txtptr,"Boot/pxeboot.0",128); // keeping 128 in there just in case someone changes the string
-        clientpacket[0xf0]=0x35; //DHCP MSG type 
-        clientpacket[0xf1]=0x1; // LEN of 1
-        clientpacket[0xf2]=0x5; //DHCP ACK
-        clientpacket[0xf3]=0x36; //DHCP server identifier
-        clientpacket[0xf4]=0x4; //DHCP server identifier length
-        clientpacket[0xf5] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better
-        clientpacket[0xf6] = (myip>>16)&0xff;
-        clientpacket[0xf7] = (myip>>8)&0xff;
-        clientpacket[0xf8] = (myip)&0xff;
-        
-        char winBCD[50];
-        strcpy(winBCD, winpepath);
-        strcat(winBCD, "Boot/BCD");
-        clientpacket[0xf9] = 0xfc; // dhcp 252 'proxy', but coopeted by bootmgfw, it's actually suggesting the boot config file
-        clientpacket[0xfa] = strlen(winBCD) + 1; //length of 9
-        txtptr = clientpacket+0xfb;
-        strncpy(txtptr, winBCD, strlen(winBCD));
-        clientpacket[0xfa + strlen(winBCD) + 1] = 0;
-        clientpacket[0xfa + strlen(winBCD) + 2] = 0xff;
-        sendto(serverfd,clientpacket,pktsize,0,(struct sockaddr*)&clientaddr,sizeof(clientaddr));
-
-        if (verbose) {
-            sprintf(logmsg, "Path of bootloader:%s. Path of BCD:%s\n", winboot, winBCD);
-            syslog(LOG_DEBUG, logmsg);
-        }
-    }
-
-    if (verbose) { closelog();}
+int main() {
+	int serverfd,port;
+	int getpktinfo = 1;
+	struct addrinfo hint, *res;
+	char cmsg[CMSG_SPACE(sizeof(struct in_pktinfo))];
+	char clientpacket[1024];
+	struct sockaddr_in clientaddr;
+	struct msghdr msg;
+	struct cmsghdr *cmsgptr;
+	struct iovec iov[1];
+	unsigned int myip;
+	char *txtptr;
+	iov[0].iov_base = clientpacket;
+	iov[0].iov_len = 1024;
+	memset(&msg,0,sizeof(msg));
+	memset(&clientaddr,0,sizeof(clientaddr));
+	msg.msg_name=&clientaddr;
+	msg.msg_namelen = sizeof(clientaddr);
+	msg.msg_iov = iov;
+	msg.msg_iovlen = 1;
+	msg.msg_control=&cmsg;
+	msg.msg_controllen = sizeof(cmsg);
+	
+	
+	char bootpmagic[4] = {0x63,0x82,0x53,0x63};
+	int pktsize;
+	int doexit=0;
+	port = 4011;
+	memset(&hint,0,sizeof(hint));
+	hint.ai_family = PF_INET;  /* Would've done UNSPEC, but it doesn't work right and this is heavily v4 specific anyway */
+	hint.ai_socktype = SOCK_DGRAM;
+	hint.ai_flags = AI_PASSIVE;
+	getaddrinfo(NULL,"4011",&hint,&res);
+	serverfd = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+	if (!serverfd) { fprintf(stderr,"That's odd...\n"); }
+	setsockopt(serverfd,IPPROTO_IP,IP_PKTINFO,&getpktinfo,sizeof(getpktinfo));
+	if (bind(serverfd,res->ai_addr ,res->ai_addrlen) < 0) {
+		fprintf(stderr,"Unable to bind 4011");
+		exit(1);
+	}
+	while (!doexit) {
+		pktsize = recvmsg(serverfd,&msg,0);
+		if (pktsize < 320) {
+			continue;
+		}
+		if (clientpacket[0] != 1 || memcmp(clientpacket+0xec,bootpmagic,4)) {
+			continue;
+		}
+		for (cmsgptr = CMSG_FIRSTHDR(&msg); cmsgptr != NULL; cmsgptr = CMSG_NXTHDR(&msg,cmsgptr)) {
+			if (cmsgptr->cmsg_level == IPPROTO_IP && cmsgptr->cmsg_type == IP_PKTINFO) {
+				myip = ((struct in_pktinfo*)(CMSG_DATA(cmsgptr)))->ipi_addr.s_addr;
+			}
+		}
+		clientpacket[0] = 2; //change to a reply
+		myip = htonl(myip); //endian neutral change
+		clientpacket[0x14] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better
+		clientpacket[0x15] = (myip>>16)&0xff;
+		clientpacket[0x16] = (myip>>8)&0xff;
+		clientpacket[0x17] = (myip)&0xff;
+		txtptr = clientpacket+0x6c;
+		strncpy(txtptr,"Boot/bootmgfw.efi",128); // keeping 128 in there just in case someone changes the string
+		clientpacket[0xf0]=0x35; //DHCP MSG type 
+		clientpacket[0xf1]=0x1; // LEN of 1
+		clientpacket[0xf2]=0x5; //DHCP ACK
+		clientpacket[0xf3]=0x36; //DHCP server identifier
+		clientpacket[0xf4]=0x4; //DHCP server identifier length
+		clientpacket[0xf5] = (myip>>24)&0xff; //maybe don't need to do this, maybe assigning the whole int would be better
+		clientpacket[0xf6] = (myip>>16)&0xff;
+		clientpacket[0xf7] = (myip>>8)&0xff;
+		clientpacket[0xf8] = (myip)&0xff;
+		clientpacket[0xf9] = 0xfc; // dhcp 252 'proxy', but coopeted by bootmgfw, it's actually suggesting the boot config file
+		clientpacket[0xfa] = 9; //length of 9
+		txtptr = clientpacket+0xfb;
+		strncpy(txtptr,"Boot/BCD",8);
+		clientpacket[0x103]=0;
+		clientpacket[0x104]=0xff;
+		sendto(serverfd,clientpacket,pktsize,0,(struct sockaddr*)&clientaddr,sizeof(clientaddr));
+	}
 }


@@ -14,7 +14,7 @@
 #    postscript (stateful install) or with the otherpkgs processing of
 #    genimage (stateless/statelite install).  This script will install any
 #    gpfs update rpms that exist on the xCAT management node in the 
-#    /install/post/otherpkgs/gpfs_updates directory.
+#    /install/post/gpfs_updates directory.
 #    This is necessary because the GPFS updates can ONLY be installed
 #    after the base rpms have been installed, and the update rpms cannot
 #    exist in any rpm repositories used by xCAT otherpkgs processing
@@ -41,8 +41,8 @@ if [ $OS != "AIX" ]; then
        mkdir -p /tmp/gpfs_updates
        rm -f -R /tmp/gpfs_updates/*
        cd /tmp/gpfs_updates
-#        wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -t 10 -T 60 -nH --cut-dirs=3 ftp://$MASTER/$UPDATES_DIR/*.rpm 2> /tmp/wget.log
-        wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -t 10 -T 60 -nH --cut-dirs=4 --reject "index.html*"  --no-parent http://$MASTER$INSTALL_DIR/$UPDATES_DIR/ 2> /tmp/wget.log
+#        wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -t 10 -T 60 -nH --cut-dirs=3 ftp://$SITEMASTER/$UPDATES_DIR/*.rpm 2> /tmp/wget.log
+        wget -l inf -N -r --waitretry=10 --random-wait --retry-connrefused -t 10 -T 60 -nH --cut-dirs=4 --reject "index.html*"  --no-parent http://$SITEMASTER$INSTALL_DIR/$UPDATES_DIR/ 2> /tmp/wget.log
        if [ -n "`ls *.rpm 2> /dev/null`" ] ; then
            rpm -Uvh *.rpm
        fi
@@ -1,6 +0,0 @@
-xcat-openstack-baremetal for Debian
-----------------------------------
-
-<possible notes regarding this package - if none, delete this file>
-
- -- root <root@unknown>  Wed, 12 Mar 2014 01:47:54 -0700
@@ -1,9 +0,0 @@
-xcat-openstack-baremetal for Debian
-----------------------------------
-
-<this file describes information about the source package, see Debian policy
-manual section 4.14. You WILL either need to modify or delete this file>
-
-
-
-
@@ -1,5 +0,0 @@
-xcat-openstack-baremetal (2.8.4-1) unstable; urgency=low
-
-  * Initial release (Closes: #nnnn)  <nnnn is the bug number of your ITP>
-
- -- root <root@unknown>  Wed, 12 Mar 2014 01:47:54 -0700
@@ -1 +0,0 @@
-8
@@ -1,14 +0,0 @@
-Source: xcat-openstack-baremetal
-Section: admin
-Priority: extra
-Maintainer: xCAT <xcat-user@lists.sourceforge.net>
-Build-Depends: debhelper (>= 8.0.0)
-Standards-Version: 3.9.4
-Homepage: http://xcat.sourceforge.net/
-#Vcs-Git: git://git.debian.org/collab-maint/xcat-openstack-baremetal.git
-#Vcs-Browser: http://git.debian.org/?p=collab-maint/xcat-openstack-baremetal.git;a=summary
-
-Package: xcat-openstack-baremetal
-Architecture: all
-Depends: xCAT-client
-Description:  Executables and data of the xCAT baremetal driver for OpenStack
@@ -1,38 +0,0 @@
-Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
-Upstream-Name: xcat-openstack-baremetal
-Source: <url://example.com>
-
-Files: *
-Copyright: <years> <put author's name and email here>
-           <years> <likewise for another author>
-License: <special license>
- <Put the license of the package here indented by 1 space>
- <This follows the format of Description: lines in control file>
- .
- <Including paragraphs>
-
-# If you want to use GPL v2 or later for the /debian/* files use 
-# the following clauses, or change it to suit. Delete these two lines
-Files: debian/*
-Copyright: 2014 root <root@unknown>
-License: GPL-2+
- This package is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- .
- This package is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
- .
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>
- .
- On Debian systems, the complete text of the GNU General
- Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".
-
-# Please also look if there are files or directories which have a
-# different copyright/license attached and list them here.
-# Please avoid to pick license terms that are more restrictive than the
-# packaged work, as it may make Debian's contributions unacceptable upstream.
@@ -1,7 +0,0 @@
-opt/xcat/bin
-opt/xcat/sbin
-opt/xcat/lib/perl/xCAT_plugin
-opt/xcat/lib/python/xcat/openstack/baremetal
-opt/xcat/share/xcat/openstack/postscripts
-opt/xcat/share/man/man1
-opt/xcat/share/doc/man1
@@ -1,2 +0,0 @@
-xcat-openstack-baremetal_2.8.4-1_all.deb admin extra
-xcat-openstack-baremetal_2.8.4-1_all.deb admin extra
@@ -1,6 +0,0 @@
-lib/* opt/xcat/lib/
-share/xcat/openstack/postscripts/* opt/xcat/share/xcat/openstack/postscripts/
-share/man/man1/* opt/xcat/share/man/man1/
-share/doc/man1/*  opt/xcat/share/doc/man1/
-
-
@@ -1,43 +0,0 @@
-#!/bin/sh
-# postinst script for xcat-openstack-baremetal
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-#copy the postscripts under /installl/postscripts directory on MN only
-if [ -f "/etc/xCATMN" ]; then
-        cp /opt/xcat/share/xcat/openstack/postscripts/* /install/postscripts/
-fi
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
@@ -1,46 +0,0 @@
-#!/bin/sh
-# prerm script for xcat-openstack-baremetal
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <prerm> `remove'
-#        * <old-prerm> `upgrade' <new-version>
-#        * <new-prerm> `failed-upgrade' <old-version>
-#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
-#        * <deconfigured's-prerm> `deconfigure' `in-favour'
-#          <package-being-installed> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see http://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    #remove postscripts under /installl/postscripts directory on MN only
-    if [ -f "/etc/xCATMN" ]; then
-        for fn in /opt/xcat/share/xcat/openstack/postscripts/*
-        do
-                bn=`basename $fn`
-                rm /install/postscripts/$bn
-        done
-    fi
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0
@@ -1,44 +0,0 @@
-#!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-build:
-	pwd
-	`pwd`/xpod2man
-
-clean:
-	dh_testdir
-	dh_testroot
-	dh_clean -d
-
-install:
-	pwd
-	dh_testdir
-	dh_testroot
-	dh_installdirs
-	dh_install -X".svn"
-	chmod 444 `pwd`/debian/xcat-openstack-baremetal/opt/xcat/share/man/man1/*
-	chmod 644 `pwd`/debian/xcat-openstack-baremetal/opt/xcat/share/doc/man1/*
-	dh_link
-
-binary-indep: build install
-	pwd
-	export
-	dh_installman
-	dh_compress
-	dh_installdeb
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary-arch:
-	pwd
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
@@ -1 +0,0 @@
-1.0
@@ -1,201 +0,0 @@
-dh_installdirs
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
-dh_installdirs
-dh_install
-dh_link
-dh_installman
-dh_compress
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb
-dh_builddeb
@@ -1,4 +0,0 @@
-opt/xcat/bin/xcatclient opt/xcat/sbin/deploy_ops_bm_node
-opt/xcat/bin/xcatclient opt/xcat/sbin/cleanup_ops_bm_node
-opt/xcat/bin/xcatclient opt/xcat/bin/opsaddbmnode
-opt/xcat/bin/xcatclientnnr opt/xcat/bin/opsaddimage
@@ -1 +0,0 @@
-misc:Depends=
@@ -1,965 +0,0 @@
-# IBM(c) 2013 EPL license http://www.eclipse.org/legal/epl-v10.html
-package xCAT_plugin::openstack;
-BEGIN
-{
-    $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : '/opt/xcat';
-}
-use lib "$::XCATROOT/lib/perl";
-use xCAT::Utils;
-use xCAT::TableUtils;
-use xCAT::SvrUtils;
-use xCAT::NetworkUtils;
-use xCAT::Table;
-use Data::Dumper;
-use File::Path;
-use File::Copy;
-use Getopt::Long;
-Getopt::Long::Configure("bundling");
-Getopt::Long::Configure("pass_through");
-
-
-sub handled_commands {
-    return {
-		opsaddbmnode => "openstack",  #external command
-		opsaddimage => "openstack",   #external command
-		deploy_ops_bm_node => "openstack",   #internal command called from the baremetal driver
-		cleanup_ops_bm_node => "openstack",  #internal command called from the baremetal driver
-   }
-}
-
-sub process_request {
-	my $request = shift;
-	my $callback = shift;
-	my $doreq = shift;
-	my $command = $request->{command}->[0];
-	
-	if ($command eq "opsaddbmnode") {
-		return opsaddbmnode($request, $callback, $doreq);
-	} elsif ($command eq "opsaddimage") {
-		return opsaddimage($request, $callback, $doreq);
-	} elsif ($command eq "deploy_ops_bm_node") {
-		return deploy_ops_bm_node($request, $callback, $doreq);
-	} elsif ($command eq "cleanup_ops_bm_node") {
-		return cleanup_ops_bm_node($request, $callback, $doreq);
-	} else {
-		$callback->({error=>["Unsupported command: $command."],errorcode=>[1]});
-		return 1;
-	}
-}
-
-
-#-------------------------------------------------------------------------------
-
-=head3  opsaddbmnode
-     This function takes the xCAT nodes and register them
-     as the OpenStack baremetal nodes
-=cut
-
-#-------------------------------------------------------------------------------
-sub opsaddbmnode {
-	my $request = shift;
-	my $callback = shift;
-	my $doreq = shift;
-	
-	@ARGV = @{$request->{arg}};
-	Getopt::Long::Configure("bundling");
-	Getopt::Long::Configure("no_pass_through");
-	
-	my $help;
-	my $version;
-	my $verbose;
-	my $host;
-	
-    if(!GetOptions(
-            'h|help'      => \$help,
-            'v|version'   => \$version,
-            'V|verbose'   => \$verbose,
-            's=s'         => \$host,
-       ))
-    {
-        &opsaddbmnode_usage($callback);
-        return 1;
-    }
-    # display the usage if -h or --help is specified
-    if ($help) {
-        &opsaddbmnode_usage($callback);
-        return 0;
-    }
-    # display the version statement if -v or --verison is specified
-    if ($version)
-    {
-        my $rsp={};
-        $rsp->{data}->[0]= xCAT::Utils->Version();
-        $callback->($rsp);
-        return 0;
-    }
-	
-	if (!$request->{node}) {
-		$callback->({error=>["Please specify at least one node."],errorcode=>[1]});
-		return 1;  
-	}
-	if (!$host) {
-		$callback->({error=>["Please specify the OpenStack compute host name with -s flag."],errorcode=>[1]});
-		return 1;  
-	}
-    
-    my $nodes = $request->{node};
-
-    #get node mgt
-    my $nodehmhash;
-    my $nodehmtab = xCAT::Table->new("nodehm");
-    if ($nodehmtab) {
-        $nodehmhash = $nodehmtab->getNodesAttribs($nodes,['power', 'mgt']);
-    }
-
-    #get bmc info for the nodes
-	my $ipmitab = xCAT::Table->new("ipmi", -create => 0);
-	my $tmp_ipmi;
-	if ($ipmitab) {
-		$tmp_ipmi = $ipmitab->getNodesAttribs($nodes, ['bmc','username', 'password'], prefetchcache=>1);
-		#print Dumper($tmp_ipmi);
-	} else {
-		$callback->({error=>["Cannot open the ipmi table."],errorcode=>[1]});
-		return 1;		
-	}
-
-    #get mac for the nodes
-	my $mactab = xCAT::Table->new("mac", -create => 0);
-	my $tmp_mac;
-	if ($mactab) {
-		$tmp_mac = $mactab->getNodesAttribs($nodes, ['mac'], prefetchcache=>1);
-		#print Dumper($tmp_mac);
-	} else {
-		$callback->({error=>["Cannot open the mac table."],errorcode=>[1]});
-		return 1;		
-	}
-
-    #get cpu, memory and disk info for the nodes
-	my $hwinvtab = xCAT::Table->new("hwinv", -create => 0);
-	my $tmp_hwinv;
-	if ($hwinvtab) {
-		$tmp_hwinv = $hwinvtab->getNodesAttribs($nodes, ['cpucount', 'memory', 'disksize'], prefetchcache=>1);
-		#print Dumper($tmp_hwinv);
-	} else {
-		$callback->({error=>["Cannot open the hwinv table."],errorcode=>[1]});
-		return 1;		
-	}
-
-    #get default username and password for bmc
-    my $d_bmcuser;
-    my $d_bmcpasswd;
-	my $passtab = xCAT::Table->new('passwd');
-	if ($passtab) {
-		($tmp_passwd)=$passtab->getAttribs({'key'=>'ipmi'},'username','password');
-		if (defined($tmp_passwd)) {
-			$d_bmcuser = $tmp_passwd->{username};
-			$d_bmcpasswd = $tmp_passwd->{password};
-		}
-	}
-
-	#print "d_bmcuser=$d_bmcuser, d_bmcpasswd=$d_bmcpasswd \n";
-	foreach my $node (@$nodes) {
-        #collect the node infomation needed for each node, some info
-		my $mgt;
-		my $ref_nodehm = $nodehmhash->{$node}->[0];
-		if ($ref_nodehm) {
-			if ($ref_nodehm->{'power'}) {
-				$mgt = $ref_nodehm->{'power'};
-			} elsif ($ref_nodehm->{'mgt'}) {
-				$mgt = $ref_nodehm->{'mgt'};
-			}
-		}
-
-		my ($bmc, $bmc_user, $bmc_password, $mac, $cpu, $memory, $disk);
-		if (($mgt) && ($mgt eq 'ipmi')) { 
-			my $ref_ipmi = $tmp_ipmi->{$node}->[0]; 
-			if ($ref_ipmi) {
-				if (exists($ref_ipmi->{bmc})) {
-					$bmc = $ref_ipmi->{bmc};
-				}
-				if (exists($ref_ipmi->{username})) {
-					$bmc_user = $ref_ipmi->{username};
-					if (exists($ref_ipmi->{password})) {
-						$bmc_password = $ref_ipmi->{password};
-					} 
-				} else { #take the default if they cannot be found on ipmi table
-					if ($d_bmcuser) { $bmc_user = $d_bmcuser; }
-					if ($d_bmcpasswd) { $bmc_password = $d_bmcpasswd; }
-				}
-			}
-		} # else { # for hardware control point other than ipmi, just fake it in OpenStack.
-			#$bmc = "0.0.0.0";
-			#$bmc_user = "xCAT";
-			#$bmc_password = "xCAT";
-		#}
-
-		my $ref_mac = $tmp_mac->{$node}->[0]; 
-	    if ($ref_mac) {
-			if (exists($ref_mac->{mac})) {
-				$mac = $ref_mac->{mac};
-			}
-		}
-
-		$ref_hwinv = $tmp_hwinv->{$node}->[0]; 
-	    if ($ref_hwinv) {
-			if (exists($ref_hwinv->{cpucount})) {
-				$cpu = $ref_hwinv->{cpucount};
-			}
-			if (exists($ref_hwinv->{memory})) {
-				$memory = $ref_hwinv->{memory};
-                #TODO: what if the unit is not in MB? We need to convert it to MB
-				$memory =~ s/MB|mb//g;
-			}
-			if (exists($ref_hwinv->{disksize})) {
-				#The format of the the disk size is: sda:250GB,sdb:250GB or just 250GB
-                #We need to get the size of the first one
-				$disk = $ref_hwinv->{disksize};
-				my @a = split(',', $disk);
-				my @b = split(':', $a[0]);
-				if (@b > 1) {
-					$disk = $b[1];
-				} else {
-					$disk = $b[0];
-				}
-                #print "a=@a, b=@b\n";
-                #TODO: what if the unit is not in GB? We need to convert it to MB
-				$disk =~ s/GB|gb//g;
-			}
-		}
-
-		#some info are mendatory
-        if (!$mac) {
-			$callback->({error=>["Mac address is not defined in the mac table for node $node."],errorcode=>[1]});
-			next;
-		}
-		if (!$cpu) {
-			#default cpu count is 1
-			$cpu = 1;
-		}
-		if (!$memory) {
-			#default memory size is 1024MB=1GB
-			$memory = 1024;
-		}
-		if (!$disk) {
-			#default disk size is 1GB
-			$disk = 1;
-		}				
-		
-		if ($verbose) {
-			my $rsp;
-			push @{$rsp->{data}}, "Attributes gathered from the xCAT database:";
-			push @{$rsp->{data}}, "  bmc=$bmc";
-			push @{$rsp->{data}}, "  bmc_user=$bmc_user";
-			push @{$rsp->{data}}, "  bmc_password=$bmc_password";
-			push @{$rsp->{data}}, "  mac=$mac";
-			push @{$rsp->{data}}, "  cpu=$cpu";
-			push @{$rsp->{data}}, "  memory=$memory";
-			push @{$rsp->{data}}, "  disk=$disk";
-			xCAT::MsgUtils->message("I", $rsp, $callback);
-		}
-
-		#call OpenStack command to add the node into the OpenStack as
-        #a baremetal node.
-        my $cmd_tmp = "nova baremetal-node-create";
-		if ($bmc) {
-			#make sure it is an ip address
-			if (($bmc !~ /\d+\.\d+\.\d+\.\d+/) && ($bmc !~ /:/)) {
-				$bmc =  xCAT::NetworkUtils->getipaddr($bmc);
-			}
-			$cmd_tmp .= " --pm_address=$bmc";			
-		}
-		if ($bmc_user) {
-			$cmd_tmp .= " --pm_user=$bmc_user";
-		}
-		if ($bmc_password) {
-			$cmd_tmp .= " --pm_password=$bmc_password";
-		}
-		$cmd_tmp .= " $host $cpu $memory $disk $mac";
- 
-		my $cmd = qq~$cmd_tmp~;
-		if ($verbose) {
-			my $rsp;
-			push @{$rsp->{data}}, "The command to run on $host:";
-			push @{$rsp->{data}}, "  $cmd";
-			push @{$rsp->{data}}, "  ";
-			xCAT::MsgUtils->message("I", $rsp, $callback);
-		}
-		#print "cmd=$cmd\n";
-		my $output =
-			xCAT::InstUtils->xcmd($callback, $doreq, "xdsh", [$host], $cmd, 0);
-		if ($::RUNCMD_RC != 0) {
-			my $rsp;
-			push @{$rsp->{data}}, "OpenStack creating baremetal node $node:";
-			push @{$rsp->{data}}, "$output";
-			push @{$rsp->{data}}, "The command was: $cmd";
-			xCAT::MsgUtils->message("E", $rsp, $callback);
-		} else {
-			if (($verbose) && ($output)) {
-				my $rsp;
-				push @{$rsp->{data}}, "$output";
-				push @{$rsp->{data}}, "  ";
-				xCAT::MsgUtils->message("I", $rsp, $callback);
-			}
-		}
-
-	}
-}
-
-
-#-------------------------------------------------------------------------------
-
-=head3  opsaddimage
-     This function takes the xCAT nodes and register them
-     as the OpenStack baremetal nodes
-=cut
-
-#-------------------------------------------------------------------------------
-sub opsaddimage {
-	my $request = shift;
-	my $callback = shift;
-	my $doreq = shift;
-	
-	@ARGV = @{$request->{arg}};
-	Getopt::Long::Configure("bundling");
-	Getopt::Long::Configure("no_pass_through");
-	
-	my $help;
-	my $version;
-	my $verbose;
-	#my $cloud;
-	my $ops_img_names;
-    my $controller;
-	
-    if(!GetOptions(
-            'h|help'      => \$help,
-            'v|version'   => \$version,
-            'V|verbose'   => \$verbose,
-            'c=s'         => \$controller,
-			'n=s'         => \$ops_img_names,
-       ))
-    {
-        &opsaddimage_usage($callback);
-        return 1;
-    }
-    # display the usage if -h or --help is specified
-    if ($help) {
-        &opsaddimage_usage($callback);
-        return 0;
-    }
-    # display the version statement if -v or --verison is specified
-    if ($version)
-    {
-        my $rsp={};
-        $rsp->{data}->[0]= xCAT::Utils->Version();
-        $callback->($rsp);
-        return 0;
-    }
-	
-	if (@ARGV ==0) {
-		$callback->({error=>["Please specify an image name or a list of image names."],errorcode=>[1]});
-		return 1;  
-	}
-
-	#make sure the input cloud name is valid.
-	#if (!$cloud) {
-	#	$callback->({error=>["Please specify the name of the cloud with -c flag."],errorcode=>[1]});
-	#	return 1;  
-	#} else {
-	#	my $cloudstab = xCAT::Table->new('clouds', -create => 0);
-	#	my @et = $cloudstab->getAllAttribs('name', 'controller');
-	#	if(@et) {
-	#		foreach my $tmp_et (@et) {
-	#			if ($tmp_et->{name} eq $cloud) {
-	#				if ($tmp_et->{controller}) {
-	#					$controller = $tmp_et->{controller};
-	#					last;
-	#				} else {
-	#					$callback->({error=>["Please specify the controller in the clouds table for the cloud: $cloud."],errorcode=>[1]});
-	#					return 1;  	
-	#				}
-	#			}
-	#		}
-	#	}
-	
-	if (!$controller) {
-		$callback->({error=>["Please specify the OpenStack controller node name with -c."],errorcode=>[1]});
-		return 1;  			
-	}
-	#}
-
-	#make sure that the images from the command are valid image names
-    @images = split(',', $ARGV[0]);
-    @new_names = ();
-	if ($ops_img_names) {
-		@new_names = split(',', $ops_img_names);
-	}
-	#print "images=@images, new image names=@new_names, controller=$controller\n";
-
-	my $image_hash = {};
-    my $osimgtab = xCAT::Table->new('osimage', -create => 0);
-    my @et = $osimgtab->getAllAttribs('imagename');
-	if(@et) {
-		foreach my $tmp_et (@et) {
-			$image_hash->{$tmp_et->{imagename}}{'xCAT'} = 1;
-		}
-	}
-	my @bad_images;
-	foreach my $image (@images) {
-		if (!exists($image_hash->{$image})) {
-			push @bad_images, $image;
-		}
-	}
-	if (@bad_images > 0) {
-		$callback->({error=>["The following images cannot be found in xCAT osimage table:\n  " . join("\n  ", @bad_images) . "\n"],errorcode=>[1]});
-		return 1;  
-	}
-
-	my $index=0;
- 	foreach my $image (@images) {
-		my $new_name = shift(@new_names);
-		if (!$new_name) {
-			$new_name = $image; #the default new name is xCAT image name
-		}
-        my $cmd_tmp = "glance image-create --name $new_name --public --disk-format qcow2 --container-format bare --property xcat_image_name=\'$image\' < /tmp/$image.qcow2";
-
-		my $cmd = qq~touch /tmp/$image.qcow2;$cmd_tmp~;
-		if ($verbose) {
-			my $rsp;
-			push @{$rsp->{data}}, "The command to run on $controller:";
-			push @{$rsp->{data}}, "   $cmd";
-			push @{$rsp->{data}}, "  ";
-			xCAT::MsgUtils->message("I", $rsp, $callback);
-		}
-		my $output =
-			xCAT::InstUtils->xcmd($callback, $doreq, "xdsh", [$controller], $cmd, 0);
-		if ($::RUNCMD_RC != 0) {
-			my $rsp;
-			push @{$rsp->{data}}, "OpenStack creating image $new_name:";
-			push @{$rsp->{data}}, "$output";
-			push @{$rsp->{data}}, "The command was: $cmd";
-			xCAT::MsgUtils->message("E", $rsp, $callback);
-		} else {
-			if (($verbose) && ($output)) {
-				my $rsp;
-				push @{$rsp->{data}}, "$output";
-				push @{$rsp->{data}}, "  ";
-				xCAT::MsgUtils->message("I", $rsp, $callback);
-			}
-		}		 
-		my $cmd1 = qq~rm /tmp/$image.qcow2~;
-		if ($verbose) {
-			my $rsp;
-			push @{$rsp->{data}}, "The command to run on $controller:";
-			push @{$rsp->{data}}, "  $cmd1";
-			push @{$rsp->{data}}, "  ";
-			xCAT::MsgUtils->message("I", $rsp, $callback);
-		}
-		my $output1 =
-			xCAT::InstUtils->xcmd($callback, $doreq, "xdsh", [$controller], $cmd1, 0);
-		if (($verbose) && ($output1)) {
-			my $rsp;
-			push @{$rsp->{data}}, "$output1";
-			push @{$rsp->{data}}, "  ";
-			xCAT::MsgUtils->message("I", $rsp, $callback);
-		}
-	}
-}
-
-#-------------------------------------------------------------------------------
-
-=head3  deploy_ops_bm_node
-	This is a internel command called by OpenStack xCAT-baremetal driver. 
-	It prepares the node by adding the config_ops_bm_node postbootscript 
-	to the postscript table for the node, then call nodeset and then boot 
-	the node up.
-=cut
-
-#-------------------------------------------------------------------------------
-sub deploy_ops_bm_node {
-	my $request = shift;
-	my $callback = shift;
-	my $doreq = shift;
-	
-	@ARGV = @{$request->{arg}};
-	Getopt::Long::Configure("bundling");
-	Getopt::Long::Configure("no_pass_through");
-
-	my $node = $request->{node}->[0];
-	
-	my $help;
-	my $version;
-	my $img_name;
-    my $hostname;
-	my $fixed_ip;
-	my $netmask;
-	
-    if(!GetOptions(
-            'h|help'      => \$help,
-            'v|version'   => \$version,
-            'image=s'     => \$img_name,
-			'host=s'      => \$hostname,
-			'ip=s'        => \$fixed_ip,
-			'mask=s'      => \$netmask,
-       ))
-    {
-        &deploy_ops_bm_node_usage($callback);
-        return 1;
-    }
-    # display the usage if -h or --help is specified
-    if ($help) {
-        &deploy_ops_bm_node_usage($callback);
-        return 0;
-    }
-    # display the version statement if -v or --verison is specified
-    if ($version)
-    {
-        my $rsp={};
-        $rsp->{data}->[0]= xCAT::Utils->Version();
-        $callback->($rsp);
-        return 0;
-    }
-	#print "node=$node, image=$img_name, host=$hostname, ip=$fixed_ip, mask=$netmask\n";
-
-	#validate the image name
-    my $osimagetab = xCAT::Table->new('osimage', -create=>1);
-	my $ref = $osimagetab->getAttribs({imagename => $img_name}, 'imagename');
-	if (!$ref) {
-		$callback->({error=>["Invalid image name: $img_name."],errorcode=>[1]});
-		return 1;  
-	}
-
-	#check if the fixed ip is within the xCAT management network.
-	#get the master ip address for the node then check if the master ip and 
-	#the OpenStack fixed_ip are on the same subnet.
-	#my $same_nw = 0;
-	#my $master = xCAT::TableUtils->GetMasterNodeName($node);
-	#my $master_ip = xCAT::NetworkUtils->toIP($master);
-	#if (xCAT::NetworkUtils::isInSameSubnet($master_ip, $fixed_ip, $netmask, 0)) {
-	#	$same_nw = 1;
-	#}
-	   
-	
-	#add config_ops_bm_node to the node's postbootscript
-	my $script = "config_ops_bm_node $hostname $fixed_ip $netmask";
-	add_postscript($callback, $node, $script);
-
-    #run nodeset 
-	my $cmd = qq~osimage=$img_name~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["nodeset"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "nodeset:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}		
- 
-    #deploy the node now, supported nodehm.mgt values: ipmi, blade,fsp, hmc.
-    my $hmtab  = xCAT::Table->new('nodehm');
-	my $hment = $hmtab->getNodeAttribs($node,['mgt']);
-	if ($hment && $hment->{'mgt'}) {
-		my $mgt = $hment->{'mgt'};
-		if ($mgt eq 'ipmi') { 
-			deploy_bmc_node($callback, $doreq, $node);
-		} elsif (($mgt eq 'blade') || ($mgt eq 'fsp')) {
-			deploy_blade($callback, $doreq, $node);
-		} elsif ($mgt eq 'hmc') {
-			deploy_hmc_node($callback, $doreq, $node);
-		} else {
-			my $rsp;
-			push @{$rsp->{data}}, "Node $node: nodehm.mgt=$mgt is not supported in the OpenStack cloud.";
-			xCAT::MsgUtils->message("E", $rsp, $callback);
-			return 1;
-		}
-	} else {
-		#nodehm.mgt must setup for node 
-		my $rsp;
-		push @{$rsp->{data}}, "Node $node: nodehm.mgt cannot be empty in order to deploy.";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}
-
-}
-
-# Deploy a rack-mounted node
-sub deploy_bmc_node {
-	my $callback = shift;
-	my $doreq = shift;
-	my $node = shift;
-
-    #set boot order
-	my $cmd = qq~net~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rsetboot"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rsetboot:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-	}		
-	
-    #reboot the node
-	my $cmd = qq~boot~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rpower"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rpower:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}
-}
-
-# Deploy a blade or fsp controlled node
-sub deploy_blade {
-	my $callback = shift;
-	my $doreq = shift;
-	my $node = shift;
-
-    #set boot order
-	my $cmd = qq~net~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rbootseq"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rbootseq:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-	}		
-	
-    #reboot the node
-	my $cmd = qq~boot~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rpower"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rpower:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}	
-}
-
-# Deploy a node controlled by HMC
-sub deploy_hmc_node {
-	my $callback = shift;
-	my $doreq = shift;
-	my $node = shift;
-
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rnetboot"],
-		 node    => [$node]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rnetboot:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}	
-}
-
-
-#-------------------------------------------------------------------------------
-
-=head3  cleanup_ops_bm_node
-	This is a internel command called by OpenStack xCAT-baremetal driver.
-	It undoes all the changes made by deploy_ops_bm_node command. It removes
-	the config_ops_bmn_ode postbootscript from the postscript table for the 
-	node, removes the alias ip and then power off the node.
-=cut
-
-#-------------------------------------------------------------------------------
-sub cleanup_ops_bm_node {
-	my $request = shift;
-	my $callback = shift;
-	my $doreq = shift;
-	
-	@ARGV = @{$request->{arg}};
-	Getopt::Long::Configure("bundling");
-	Getopt::Long::Configure("no_pass_through");
-
-	my $node = $request->{node}->[0];
-	
-	my $help;
-	my $version;
- 	my $fixed_ip;
-	
-    if(!GetOptions(
-            'h|help'      => \$help,
-            'v|version'   => \$version,
-			'ip=s'        => \$fixed_ip,
-       ))
-    {
-        &cleanup_ops_bm_node_usage($callback);
-        return 1;
-    }
-    # display the usage if -h or --help is specified
-    if ($help) {
-        &cleanup_ops_bm_node_usage($callback);
-        return 0;
-    }
-    # display the version statement if -v or --verison is specified
-    if ($version)
-    {
-        my $rsp={};
-        $rsp->{data}->[0]= xCAT::Utils->Version();
-        $callback->($rsp);
-        return 0;
-    }
-	#print "node=$node, ip=$fixed_ip\n";   
-	
-	#removes the config_ops_bm_node postbootscript from the postscripts table
-	remove_postscript($callback, $node, "config_ops_bm_node");
-
-
-	#run updatenode to remove the ip alias 
-	my $cmd = qq~-P deconfig_ops_bm_node $fixed_ip~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["updatenode"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "updatenode:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-	}
-		
-    #turn the node power off
-	$ssh_ok = 0;
-	my $cmd = qq~stat~;
-	my $output = xCAT::Utils->runxcmd(
-		{command => ["rpower"],
-		 node    => [$node], 
-		 arg     => [$cmd]},
-		$doreq, -1, 1);
-
-	if ($::RUNCMD_RC != 0) {
-		my $rsp;
-		push @{$rsp->{data}}, "rpower:";
-		push @{$rsp->{data}}, "$output";
-		xCAT::MsgUtils->message("E", $rsp, $callback);
-		return 1;
-	}   else {
-		if ($output !~ /: off/) {
-			#power off the node
-			my $cmd = qq~off~;
-			my $output = xCAT::Utils->runxcmd(
-				{command => ["rpower"],
-				 node    => [$node], 
-				 arg     => [$cmd]},
-				$doreq, -1, 1);
-			if ($::RUNCMD_RC != 0) {
-				my $rsp;
-				push @{$rsp->{data}}, "rpower:";
-				push @{$rsp->{data}}, "$output";
-				xCAT::MsgUtils->message("E", $rsp, $callback);
-				return 1;
-			}		
-		}
-	}
-}
-
-#-------------------------------------------------------
-=head3  add_postscript
-
-	It adds the 'config_ops_bm_node' postbootscript to the 
-	postscript table for the given node.
-
-=cut
-#-------------------------------------------------------
-sub  add_postscript {
-    my $callback=shift;
-    my $node=shift;
-	my $script=shift;
-	#print "script=$script\n";
-
-    my $posttab=xCAT::Table->new("postscripts", -create =>1);
-	my %setup_hash;
-	my $ref = $posttab->getNodeAttribs($node,[qw(postscripts postbootscripts)]);
-	my $found=0;
-	if ($ref) {
-		if (exists($ref->{postscripts})) {
-		    my @a = split(/,/, $ref->{postscripts});
-		    if (grep(/^config_ops_bm_node/, @a)) {
-				$found = 1;
-				if (!grep(/^$script$/, @a)) {
-					#not exact match, must replace it with the new script
-					for (@a) {
-						s/^config_ops_bm_node.*$/$script/;
-					}
-					my $new_post = join(',', @a);
-					$setup_hash{$node}={postscripts=>"$new_post"};
-				}
-			}
-		}
-		
-
-		if (exists($ref->{postbootscripts})) {
-		    my $post=$ref->{postbootscripts};
-		    my @old_a=split(',', $post);
-		    if (grep(/^config_ops_bm_node/, @old_a)) {
-				if (!grep(/^$script$/, @old_a)) {
-					#not exact match, will replace it with new script
-					for (@old_a) {
-						s/^config_ops_bm_node.*$/$script/;
-					}
-					my $new_postboot = join(',', @old_a);
-					$setup_hash{$node}={postbootscripts=>"$new_postboot"};
-				}
-		    } else {
-				if (! $found) {
-					$setup_hash{$node}={postbootscripts=>"$post,$script"};
-				}
-		    }
-		} else {
-            if (! $found) {
-				$setup_hash{$node}={postbootscripts=>"$script"};
-			}
-		}
-	} else {
-		$setup_hash{$node}={postbootscripts=>"$script"};
-	}
-
-	if (keys(%setup_hash) > 0) {
-	    $posttab->setNodesAttribs(\%setup_hash);
-	}
-
-    return 0;
-}
-
-#-------------------------------------------------------
-=head3  remove_postscript
-
-	It removes the 'config_ops_bm_node' postbootscript from 
-	the postscript table for the given node.
-
-=cut
-#-------------------------------------------------------
-sub  remove_postscript {
-    my $callback=shift;
-    my $node=shift;
-	my $script=shift;
-
-    my $posttab=xCAT::Table->new("postscripts", -create =>1);
-	my %setup_hash;
-	my $ref = $posttab->getNodeAttribs($node,[qw(postscripts postbootscripts)]);
-	my $found=0;
-	if ($ref) {
-		if (exists($ref->{postscripts})) {
-		    my @old_a = split(/,/, $ref->{postscripts});
-		    my @new_a = grep(!/^$script/, @old_a);
-			if (scalar(@new_a) != scalar(@old_a)) {
-				my $new_post = join(',', @new_a);
-				$setup_hash{$node}={postscripts=>"$new_post"};
-			}
-		}
-
-		if (exists($ref->{postbootscripts})) {
-		    my @old_b = split(/,/, $ref->{postbootscripts});
-		    my @new_b = grep(!/^$script/, @old_b);
-			if (scalar(@new_b) != scalar(@old_b)) {
-				my $new_post = join(',', @new_b);
-				$setup_hash{$node}={postbootscripts=>"$new_post"};
-			}
-		}
-
-	}
-	
-	if (keys(%setup_hash) > 0) {
-	    $posttab->setNodesAttribs(\%setup_hash);
-	}
-
-    return 0;
-}
-
-
-#-------------------------------------------------------------------------------
-
-=head3  opsaddbmnode_usage
-	The usage text for opsaddbmnode command.
-=cut
-
-#-------------------------------------------------------------------------------
-sub opsaddbmnode_usage {
-    my $cb=shift;
-    my $rsp={};
-
-    $rsp->{data}->[0]= "Usage: opsaddbmnode -h";
-    $rsp->{data}->[1]= "       opsaddbmnode -v";
-    $rsp->{data}->[2]= "       opsaddbmnode <noderange> -s <service_host> [-V]";
-    $cb->($rsp);
-}
-
-
-#-------------------------------------------------------------------------------
-
-=head3  opsaddimage_usage
-	The usage text for opsaddimage command.
-=cut
-
-#-------------------------------------------------------------------------------
-sub opsaddimage_usage {
-    my $cb=shift;
-    my $rsp={};
-
-    $rsp->{data}->[0]= "Usage: opsaddimage -h";
-    $rsp->{data}->[1]= "       opsaddimage -v";
-    $rsp->{data}->[2]= "       opsaddimage <image1,image2...> [-n <new_name1,new_name2...> -c <controller> [-V]";
-    $cb->($rsp);
-}
-
-#-------------------------------------------------------------------------------
-
-=head3   deploy_ops_bm_node_usage
-	The usage text for deploy_ops_bm_node command.
-=cut
-
-#-------------------------------------------------------------------------------
-sub deploy_ops_bm_node_usage {
-    my $cb=shift;
-    my $rsp={};
-
-    $rsp->{data}->[0]= "Usage: deploy_ops_bm_node -h";
-    $rsp->{data}->[1]= "       deploy_ops_bm_node -v";
-    $rsp->{data}->[2]= "       deploy_ops_bm_node <node> --image <image_name> --host <ops_hostname> --ip <ops_fixed_ip> --mask <netmask>";
-    $cb->($rsp);
-}
-
-#-------------------------------------------------------------------------------
-
-=head3  cleanup_ops_bm_node_usage
-	The usage text cleanup_ops_bm_node command.
-=cut
-
-#-------------------------------------------------------------------------------
-sub cleanup_ops_bm_node_usage {
-    my $cb=shift;
-    my $rsp={};
-
-    $rsp->{data}->[0]= "Usage: cleanup_ops_bm_node -h";
-    $rsp->{data}->[1]= "       cleanup_ops_bm_node -v";
-    $rsp->{data}->[2]= "       cleanup_ops_bm_node <node> [--ip <ops_fixed_ip>]";
-    $cb->($rsp);
-}
-
-1;
@@ -1,17 +0,0 @@
-# Copyright (c) 2012 NTT DOCOMO, INC.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-from xcat.openstack.baremetal import driver
-
-BareMetalDriver = driver.xCATBareMetalDriver
@@ -1,256 +0,0 @@
-# vim: tabstop=4 shiftwidth=4 softtabstop=4
-# coding=utf-8
-
-"""
-A driver for Bare-metal platform.
-"""
-
-from oslo.config import cfg
-
-from nova.compute import power_state
-from nova import context as nova_context
-from nova import exception
-from nova.openstack.common import excutils
-from nova.openstack.common.gettextutils import _
-from nova.openstack.common import importutils
-from nova.openstack.common import jsonutils
-from nova.openstack.common import log as logging
-from nova.virt.baremetal import baremetal_states
-from nova.virt.baremetal import db
-from nova.virt.baremetal import driver as bm_driver
-from nova.virt.baremetal import utils as bm_utils
-from nova.virt import driver
-from nova.virt import firewall
-from nova.virt.libvirt import imagecache
-from xcat.openstack.baremetal import xcat_driver
-from xcat.openstack.baremetal import exception as xcat_exception
-from xcat.openstack.baremetal import power_states
-
-
-LOG = logging.getLogger(__name__)
-CONF = cfg.CONF
-CONF.import_opt('use_ipv6', 'nova.netconf')
-
-
-class xCATBareMetalDriver(bm_driver.BareMetalDriver):
-    """BareMetal hypervisor driver."""
-
-    def __init__(self, virtapi, read_only=False):
-        super(xCATBareMetalDriver, self).__init__(virtapi)
-        self.xcat = xcat_driver.xCAT()
-
-    def _get_xCAT_image_name(self, image_meta):
-        prop = image_meta.get('properties')
-        xcat_image_name = prop.get('xcat_image_name')
-        if xcat_image_name:
-            return xcat_image_name
-        else:
-            raise xcat_exception.xCATInvalidImageError(image=image_meta.get('name'))
-
-    def spawn(self, context, instance, image_meta, injected_files,
-              admin_password, network_info=None, block_device_info=None):
-        """
-        Create a new instance/VM/domain on the virtualization platform.
-
-        Once this successfully completes, the instance should be
-        running (power_state.RUNNING).
-
-        If this fails, any partial instance should be completely
-        cleaned up, and the virtualization platform should be in the state
-        that it was before this call began.
-
-        :param context: security context
-        :param instance: Instance object as returned by DB layer.
-                         This function should use the data there to guide
-                         the creation of the new instance.
-        :param image_meta: image object returned by nova.image.glance that
-                           defines the image from which to boot this instance
-        :param injected_files: User files to inject into instance.
-        :param admin_password: Administrator password to set in instance.
-        :param network_info:
-           :py:meth:`~nova.network.manager.NetworkManager.get_instance_nw_info`
-        :param block_device_info: Information about block devices to be
-                                  attached to the instance.
-        """
- 	    #import pdb
-	    #pdb.set_trace()
-        node_uuid = self._require_node(instance)
-        node = db.bm_node_associate_and_update(context, node_uuid,
-                    {'instance_uuid': instance['uuid'],
-                     'instance_name': instance['hostname'],
-                     'task_state': baremetal_states.BUILDING})
-
-        try:
-            self._plug_vifs(instance, network_info, context=context)
-            self._attach_block_devices(instance, block_device_info)
-            self._start_firewall(instance, network_info)
-
-            macs = self.macs_for_instance(instance)
-            nodename = self.xcat.get_xcat_node_name(macs)
-            imagename = self._get_xCAT_image_name(image_meta)
-            hostname = instance.get('hostname')
-            
-            #get the network information for the new node
-            interfaces = bm_utils.map_network_interfaces(network_info, CONF.use_ipv6)
-            if CONF.use_ipv6:
-                fixed_ip = interfaces[0].get('address_v6')
-                netmask = interfaces[0].get('netmask_v6')
-                gateway = interfaces[0].get('gateway_v6')
-            else:
-                fixed_ip = interfaces[0].get('address')
-                netmask = interfaces[0].get('netmask')
-                gateway = interfaces[0].get('gateway')
-            #convert netmask from IPAddress to unicode string
-            if netmask:
-                netmask = unicode(netmask)
-
-            #let xCAT install it
-            bm_driver._update_state(context, node, instance, baremetal_states.DEPLOYING)
-            self.xcat.deploy_node(nodename, imagename, hostname, fixed_ip, netmask, gateway)
-            bm_driver._update_state(context, node, instance, baremetal_states.ACTIVE)
-        except Exception as e: 
-            with excutils.save_and_reraise_exception():
-                LOG.error(_("Error occured while deploying instance %(instance)s "
-                            "on baremetal node %(node)s: %(error)s") %
-                          {'instance': instance['uuid'],
-                           'node': node['uuid'],
-                           'error':str(e)})
-                bm_driver._update_state(context, node, instance, baremetal_states.ERROR)
-
-    def reboot(self, context, instance, network_info, reboot_type,
-               block_device_info=None, bad_volumes_callback=None):
-        """Reboot the specified instance.
-
-        After this is called successfully, the instance's state
-        goes back to power_state.RUNNING. The virtualization
-        platform should ensure that the reboot action has completed
-        successfully even in cases in which the underlying domain/vm
-        is paused or halted/stopped.
-
-        :param instance: Instance object as returned by DB layer.
-        :param network_info:
-           :py:meth:`~nova.network.manager.NetworkManager.get_instance_nw_info`
-        :param reboot_type: Either a HARD or SOFT reboot
-        :param block_device_info: Info pertaining to attached volumes
-        :param bad_volumes_callback: Function to handle any bad volumes
-            encountered
-        """
-        try: 
-            node = bm_driver._get_baremetal_node_by_instance_uuid(instance['uuid'])
-            macs = self.macs_for_instance(instance)
-            nodename = self.xcat.get_xcat_node_name(macs)
-            self.xcat.reboot_node(nodename)
-            bm_driver._update_state(context, node, instance, baremetal_states.RUNNING)
-        except xcat_exception.xCATCommandError as e: 
-            with excutils.save_and_reraise_exception():
-                LOG.error(_("Error occured while rebooting instance %(instance)s "
-                            "on baremetal node %(node)s: %(error)s") %
-                            {'instance': instance['uuid'],
-                             'node': node['uuid'],
-                             'error':str(e)})
-                bm_driver._update_state(context, node, instance, baremetal_states.ERROR)
-
-    def destroy(self, instance, network_info, block_device_info=None,
-                context=None):
-        """Destroy (shutdown and delete) the specified instance.
-
-        If the instance is not found (for example if networking failed), this
-        function should still succeed.  It's probably a good idea to log a
-        warning in that case.
-
-        :param context: security context
-        :param instance: Instance object as returned by DB layer.
-        :param network_info:
-           :py:meth:`~nova.network.manager.NetworkManager.get_instance_nw_info`
-        :param block_device_info: Information about block devices that should
-                                  be detached from the instance.
-        :param destroy_disks: Indicates if disks should be destroyed
-        """
- 	    #import pdb
-	    #pdb.set_trace()
-        context = nova_context.get_admin_context()
-        try:
-            node = bm_driver._get_baremetal_node_by_instance_uuid(instance['uuid'])
-            
-        except exception.InstanceNotFound:
-            LOG.warning(_("Destroy function called on a non-existing instance %s")
-                        % instance['uuid'])
-            return
-
-        try:
-            macs = self.macs_for_instance(instance)
-            nodename = self.xcat.get_xcat_node_name(macs)
-            interfaces = bm_utils.map_network_interfaces(network_info, CONF.use_ipv6)
-            fixed_ip=None
-            if interfaces and interfaces[0]: 
-                if CONF.use_ipv6:
-                    fixed_ip = interfaces[0].get('address_v6')
-                else:
-                    fixed_ip = interfaces[0].get('address')
-            if fixed_ip:
-                self.xcat.cleanup_node(nodename, fixed_ip)
-            else:
-                self.xcat.cleanup_node(nodename)
-        except Exception as e:
-            #just log it and move on
-            LOG.warning(_("Destroy called with xCAT error:" + str(e)))
-
-        try:
-            self._detach_block_devices(instance, block_device_info)
-            self._stop_firewall(instance, network_info)
-            self._unplug_vifs(instance, network_info)
-            
-            bm_driver._update_state(context, node, None, baremetal_states.DELETED)
-        except Exception as e:
-            with excutils.save_and_reraise_exception():
-                LOG.error(_("Error occurred while destroying instance %s: %s") 
-                          % (instance['uuid'], str(e)))
-                bm_driver._update_state(context, node, instance,
-                                        baremetal_states.ERROR)
-
-    def power_off(self, instance, node=None):
-        """Power off the specified instance."""
-        macs = self.macs_for_instance(instance)
-        nodename = self.xcat.get_xcat_node_name(macs)
-        self.xcat.power_off_node(nodename)
-            
-
-    def power_on(self, context, instance, network_info, block_device_info=None,
-                 node=None):
-        """Power on the specified instance."""
-        macs = self.macs_for_instance(instance)
-        nodename = self.xcat.get_xcat_node_name(macs)
-        self.xcat.power_on_node(nodename)
-
-
-    def get_console_output(self, instance):
-        pass
-
-    def get_info(self, instance):
-        """Get the current status of an instance, by name (not ID!)
-
-        Returns a dict containing:
-        :state:           the running state, one of the power_state codes
-        :max_mem:         (int) the maximum memory in KBytes allowed
-        :mem:             (int) the memory in KBytes used by the domain
-        :num_cpu:         (int) the number of virtual CPUs for the domain
-        :cpu_time:        (int) the CPU time used in nanoseconds
-        """
-
-        node = bm_driver._get_baremetal_node_by_instance_uuid(instance['uuid'])
-        macs = self.macs_for_instance(instance)
-        nodename = self.xcat.get_xcat_node_name(macs)
-
-        ps = self.xcat.get_node_power_state(nodename)
-        if ps == power_states.ON:
-            pstate = power_state.RUNNING
-        elif ps == power_states.OFF:
-            pstate = power_state.SHUTDOWN
-        else:
-            pstate = power_state.NOSTATE
-
-        return {'state': pstate,
-                'max_mem': node['memory_mb'],
-                'mem': node['memory_mb'],
-                'num_cpu': node['cpus'],
-                'cpu_time': 0}
@@ -1,41 +0,0 @@
-# vim: tabstop=4 shiftwidth=4 softtabstop=4
-
-"""xCAT baremtal exceptions.
-"""
-
-import functools
-import sys
-
-from oslo.config import cfg
-import webob.exc
-
-from nova.openstack.common import excutils
-from nova.openstack.common.gettextutils import _
-from nova.openstack.common import log as logging
-from nova import safe_utils
-from nova import exception as nova_exception
-
-LOG = logging.getLogger(__name__)
-
-class xCATException(Exception):
-    errmsg = _("xCAT general exception")
-
-    def __init__(self, errmsg=None, **kwargs):
-        if not errmsg:
-            errmsg = self.errmsg
-            errmsg = errmsg % kwargs
-
-        super(xCATException, self).__init__(errmsg)
-
-class xCATCommandError(xCATException):
-    errmsg =  _("Error returned when calling xCAT command %(cmd)s"
-                " for node %(node)s:%(error)s")
-
-class xCATInvalidImageError(xCATException):
-    errmsg = _("The image %(image)s is not an xCAT image")
-
-class xCATDeploymentFailure(xCATException):    
-    errmsg = _("xCAT node deployment failed for node %(node)s:%(error)s")
-
-class xCATRebootFailure(xCATException):    
-    errmsg = _("xCAT node rebooting failed for node %(node)s:%(error)s")
@@ -1,9 +0,0 @@
-# vim: tabstop=4 shiftwidth=4 softtabstop=4
-
-"""
-Possible xCAT node power states.
-"""
-
-OFF = 'off'
-ON = 'on'
-ERROR = 'error'
@@ -1,260 +0,0 @@
-# vim: tabstop=4 shiftwidth=4 softtabstop=4
-# coding=utf-8
-
-
-"""
-Baremetal xCAT power manager.
-"""
-
-import os
-import sys
-import stat
-from oslo.config import cfg
-import datetime
-
-from nova import context as nova_context
-from nova.virt.baremetal import baremetal_states
-from nova.openstack.common.gettextutils import _
-from nova.openstack.common import log as logging
-from nova.openstack.common import loopingcall
-from nova.openstack.common import timeutils
-from nova import paths
-from nova import utils
-from xcat.openstack.baremetal import exception
-from xcat.openstack.baremetal import power_states
-
-LOG = logging.getLogger(__name__)
-
-# register configuration options
-xcat_opts = [
-    cfg.IntOpt('deploy_timeout',
-                help='Timeout for node deployment. Default: 0 second (unlimited)',
-                default=0),
-    cfg.IntOpt('reboot_timeout',
-                help='Timeout for rebooting a node. Default: 0 second (unlimited)',
-                default=0),    
-    cfg.IntOpt('deploy_checking_interval',
-                help='Checking interval for node deployment. Default: 10 seconds',
-                default=10),
-    cfg.IntOpt('reboot_checking_interval',
-                help='Checking interval for rebooting a node. Default: 5 seconds',
-                default=5),    
-   ]
-xcat_group = cfg.OptGroup(name='xcat',
-                          title='xCAT Options')
-CONF = cfg.CONF
-CONF.register_group(xcat_group)
-CONF.register_opts(xcat_opts, xcat_group)
-
-
-class xCAT(object):
-    """A driver that calls xCAT funcions"""
-
-    def __init__(self):
-        #setup the path for xCAT commands
-        #xcatroot = os.getenv('XCATROOT', '/opt/xcat/')
-        #sys.path.append("%s/bin" % xcatroot)
-        #sys.path.append("%s/sbin" % xcatroot)
-        pass
-
-    def _exec_xcat_command(self, command):
-        """Calls xCAT command."""
-        args = command.split(" ")
-        out, err = utils.execute(*args, run_as_root=True)
-        LOG.debug(_("xCAT command stdout: '%(out)s', stderr: '%(err)s'"),
-                  {'out': out, 'err': err})
-        return out, err
-
-    def get_xcat_node_name(self, macs):
-        """Get the xcat node name given mac addressed.
-
-        It uses the mac address to search for the node name in xCAT.
-        """
-        for mac in macs:
-            out, err = self._exec_xcat_command("lsdef -w mac=%s" % mac)
-            if out:
-                return out.split(" ")[0]
-        
-        errstr='No node found in xCAT with the following mac address: ' \
-            + ','.join(macs)
-        LOG.warning(errstr)
-        raise exception.xCATCommandError(errstr)
-
-        
-    def deploy_node(self, nodename, imagename, hostname, fixed_ip, netmask, gateway):
-        """
-        Install the node.
-
-        It calls xCAT command deploy_ops_bmnode which prepares the node
-        by adding the config_ops_bm_node postbootscript to the postscript
-        table for the node, then call nodeset and then boot the node up.
-        """
-        out, err = self._exec_xcat_command(
-            "deploy_ops_bm_node %(node)s --image %(image)s"
-            " --host %(host)s --ip %(ip)s --mask %(mask)s" 
-            % {'node': nodename,
-               'image': imagename,
-               'host': hostname,
-               'ip': fixed_ip,
-               'mask': netmask,
-            })
-        if err:
-            errstr = _("Error returned when calling xCAT deploy_ops_bm_node"
-                       " command for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-        self._wait_for_node_deploy(nodename)
-
-    def cleanup_node(self, nodename, fixed_ip=None):
-        """
-        Undo all the changes made to the node by deploy_node function.
-
-        It calls xCAT command cleanup_ops_bm_node which removes the
-        config_ops_bm_node postbootscript from the postscript table
-        for the node, removes the alias ip and then power the node off.
-        """
-        cmd = "cleanup_ops_bm_node %s" % nodename
-        if fixed_ip:
-            cmd += " --ip %s" % fixed_ip
-        out, err = self._exec_xcat_command(cmd)
-
-        if err:
-            errstr = _("Error returned when calling xCAT cleanup_ops_bm_node"
-                       " command for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-
-    def power_on_node(self, nodename):
-        """Power on the node."""
-        state = self.get_node_power_state(nodename)
-        if state ==  power_states.ON:
-            LOG.warning(_("Powring on node called, but the node %s "
-                          "is already on") % nodename)
-        out, err = self._exec_xcat_command("rpower %s on" % nodename)
-        if err:
-            errstr = _("Error returned when calling xCAT rpower on"
-                    " for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-        else:
-            self._wait_for_node_reboot(nodename)
-            return power_states.ON
-    
-    def power_off_node(self, nodename):
-        """Power off the node."""
-        state = self.get_node_power_state(nodename)
-        if state ==  power_states.OFF:
-            LOG.warning(_("Powring off node called, but the node %s "
-                          "is already off") % nodename)
-        out, err = self._exec_xcat_command("rpower %s off" % nodename)
-        if err:
-            errstr = _("Error returned when calling xCAT rpower off"
-                    " for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-        else:
-            return power_states.OFF
-
-    def reboot_node(self, nodename):
-        """Reboot the node."""
-        out, err = self._exec_xcat_command("rpower %s boot" % nodename)
-        if err:
-            errstr = _("Error returned when calling xCAT rpower boot"
-                    " for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-        
-        self._wait_for_node_reboot(nodename)
-        return power_states.ON
-        
-
-    def get_node_power_state(self, nodename):
-        out, err = self._exec_xcat_command("rpower %s stat" % nodename)
-        if err:
-            errstr = _("Error returned when calling xCAT rpower stat"
-                    " for node %s:%s") % (nodename, err)
-            LOG.warning(errstr)
-            raise exception.xCATCommandError(errstr)
-        else:
-            state = out.split(":")[1]
-            if state:
-                state = state.strip()
-                if state == 'on':
-                    return power_states.ON
-                elif state == 'off':
-                    return power_states.OFF
-            
-            return power_states.ERROR
-            
-    def _wait_for_node_deploy(self, nodename):
-        """Wait for xCAT node deployment to complete."""
-        locals = {'errstr':''}
-
-        def _wait_for_deploy():
-            out,err = self._exec_xcat_command("nodels %s nodelist.status" % nodename)
-            if err:
-                locals['errstr'] = _("Error returned when quering node status"
-                           " for node %s:%s") % (nodename, err)
-                LOG.warning(locals['errstr'])
-                raise loopingcall.LoopingCallDone()
-
-            if out:
-                node,status = out.split(": ")
-                status = status.strip()
-                if status == "booted":
-                    LOG.info(_("Deployment for node %s completed.")
-                             % nodename)
-                    raise loopingcall.LoopingCallDone()
-
-            if (CONF.xcat.deploy_timeout and
-                    timeutils.utcnow() > expiration):
-                locals['errstr'] = _("Timeout while waiting for"
-                           " deployment of node %s.") % nodename
-                LOG.warning(locals['errstr'])
-                raise loopingcall.LoopingCallDone()
-
-        expiration = timeutils.utcnow() + datetime.timedelta(
-                seconds=CONF.xcat.deploy_timeout)
-        timer = loopingcall.FixedIntervalLoopingCall(_wait_for_deploy)
-        # default check every 10 seconds
-        timer.start(interval=CONF.xcat.deploy_checking_interval).wait()
-
-        if locals['errstr']:
-            raise exception.xCATDeploymentFailure(locals['errstr'])
-
-
-    def _wait_for_node_reboot(self, nodename):
-        """Wait for xCAT node boot to complete."""
-        locals = {'errstr':''}
-
-        def _wait_for_reboot():
-            out,err = self._exec_xcat_command("nodestat %s" % nodename)
-            if err:
-                locals['errstr'] = _("Error returned when quering node status"
-                           " for node %s:%s") % (nodename, err)
-                LOG.warning(locals['errstr'])
-                raise loopingcall.LoopingCallDone()
-
-            if out:
-                node,status = out.split(": ")
-                status = status.strip()
-                if status == "sshd":
-                    LOG.info(_("Rebooting node %s completed.")
-                             % nodename)
-                    raise loopingcall.LoopingCallDone()
-
-            if (CONF.xcat.reboot_timeout and
-                    timeutils.utcnow() > expiration):
-                locals['errstr'] = _("Timeout while waiting for"
-                           " rebooting node %s.") % nodename
-                LOG.warning(locals['errstr'])
-                raise loopingcall.LoopingCallDone()
-
-        expiration = timeutils.utcnow() + datetime.timedelta(
-                seconds=CONF.xcat.reboot_timeout)
-        timer = loopingcall.FixedIntervalLoopingCall(_wait_for_reboot)
-        # default check every 5 seconds
-        timer.start(interval=CONF.xcat.reboot_checking_interval).wait()
-
-        if locals['errstr']:
-            raise exception.xCATRebootFailure(locals['errstr'])
@@ -1,92 +0,0 @@
-=head1 NAME
-
-B<opsaddbmnode> - It adds xCAT baremetal nodes to an OpenStack cloud.
-
-=head1 SYNOPSIS
-
-B<opsaddbmnode> I<noderange> B<-s> I<service_host> [B<-V>|B<--verbose>]
-
-B<opsaddbmnode> [B<-h>|B<--help>]
-
-B<opsaddbmnode> [B<-v>|B<--version>]
-
-=head1 DESCRIPTION
-
-The B<opsaddbmnode> command registers xCAT nodes to an OpenStack cloud. An OpenStack nova baremetal node registration command takes several node attributes:
-
-=over
-
-=item BMC ip addresss, user id and password
-
-=item Name of nova compute host which will control this baremetal node
-
-=item Number of CPUs in the node
-
-=item Memory in the node (MB)
-
-=item Local hard disk in the node (GB)
-
-=item MAC address to provision the node
-
-=back
-
-The opsaddbmnode command pulls the above baremetal node information from xCAT tables and calls "nova baremetal-node-create" to register the baremetal node with the OpenStack cloud.
-
-Please make sure the following xCAT tables are filled with correct information for the given nodes before calling this command.
-
-=over
-
-=item ipmi (for BMC ip addresss, user id and password)
-
-=item mac (for MAC address)
-
-=item hwinv (for CPU, memory and disk info.)
-
-=back
-
-=head1 Parameters
-
-I<noderage> is a comma separated node or node group names. 
-
-
-=head1 OPTIONS
-
-=over 10
-
-=item B<-s>    The node name of the OpenStack compute host that hosts the baremetal nodes. 
-
-=item B<-h|--help>     Display usage message.
-
-=item B<-v|--version>  The Command Version.
-
-=item B<-V|--verbose>  Verbose output.
-
-=back
-
-=head1 RETURN VALUE
-
-0  The command completed successfully.
-
-1  An error has occurred.
-
-=head1 EXAMPLES
-
-=over 3
-
-=item 1
-
-To register node1, node2 and node3 to OpenStack, sv1 is the compute host.
-
-   opsassbmnode node1,node2,node3 -s sv1
-
-
-=back
-
-=head1 FILES
-
-/opt/xcat/bin/opadddbmnode
-
-=head1 SEE ALSO
-
-L<opsaddimage(1)|opsaddimage.1>
-
@@ -1,67 +0,0 @@
-=head1 NAME
-
-B<opsaddimage> - It adds or removes nodes for the vlan.
-
-=head1 SYNOPSIS
-
-B<opsaddimage> I<image1,image2,...> B<-n> I<new_name1,new_name2,...> [B<-c> I<controller>] [B<-V>|B<--verbose>] 
-
-B<opsaddimage> [B<-h>|B<--help>]
-
-B<opsaddimage> [B<-v>|B<--version>]
-
-=head1 DESCRIPTION
-
-The B<opsaddimage> command adds a list of xCAT images into the OpenStack cloud. 
-
-Under the cover, it creates a fake image and registers the fake image into OpenStack with command B<glance image-create>. It sets the property in the image to indicate that this is an xCAT image and also stores the original xCAT image name in the property for further reference. 
-
-The xCAT image names can be listed using B<lsdef -t osimage> command.      
-
-=head1 Parameters
-
-I<image1,image1...> a comma separated xCAT images names. 
-
-
-=head1 OPTIONS
-
-=over 10
-
-=item B<-n>    a comma separated new image names in the OpenStack. If omitted, the default is the original xCAT image nanme.  
-
-=item B<-c>  the node name of the OpenStack controller. This node must be an xCAT managed node.
-
-=item B<-h|--help>     Display usage message.
-
-=item B<-v|--version>  The Command Version.
-
-=item B<-V|--verbose>  Verbose output.
-
-=back
-
-=head1 RETURN VALUE
-
-0  The command completed successfully.
-
-1  An error has occurred.
-
-=head1 EXAMPLES
-
-=over 3
-
-=item 1.
-
-To register xCAT image rhels6.3-x86_64-install-compute into OpenStack.
-
-  opsaddimage rhels6.3-x86_64-install-compute -c sv2
-
-=back
-
-=head1 FILES
-
-/opt/xcat/bin/opsaddimage
-
-=head1 SEE ALSO
-
-L<opsaddbmnode(1)|opsaddbmnode.1>
-
@@ -1,215 +0,0 @@
-#!/bin/sh 
-# IBM(c) 2014 EPL license http://www.eclipse.org/legal/epl-v10.html
-
-# xCAT post script for configuring the openstack baremetal node.
-# The format is:
-# config_ops_bm_node ops_hostname ops_ip ops_netmask
-
-
-get_os_type()
-{
-    #get os type
-	str_os_type=`uname | tr 'A-Z' 'a-z'`
-	str_temp=''
-	if [ "$str_os_type" = "linux" ];then
-		str_temp=`echo $OSVER | grep -E '(sles|suse)'`
-		if [ -f "/etc/debian_version" ];then
-			str_os_type="debian"
-		elif [ -f "/etc/SuSE-release" -o -n "$str_temp" ];then
-			str_os_type="sles"
-		else
-			str_os_type="redhat"
-		fi
-	else
-		str_os_type="aix"
-	fi
-	echo "$str_os_type"
-}
-
-
-setup_ip()
-{
-	str_os_type=$1
-    str_if_name=$2
-    str_v4ip=$3
-    str_v4mask=$4
-
-	ret=`ifconfig $str_if_name |grep "inet addr" 2>&1`
-    if [ $? -eq 0 ]; then
-		old_ip=`echo $ret|cut -d':' -f2 |cut -d' ' -f1`
-		old_mask=`echo $ret|cut -d':' -f4`
-		#echo "old ip = $old_ip, old mask=$old_mask"
-		if [ "$old_ip" == "$str_v4ip" -a "$old_mask" == "$str_v4mask" ]; then
-			#if nic is up and the address is the same, then donothing
-			#echo "do nothing"
-			exit 0
-		else
-			#bring down the nic and reconstruct it.
-			#echo "bring down the old nic"
-			ifconfig $str_if_name del $old_ip
-        fi
-	fi
-
-    if [ "$str_os_type" = "sles" ];then
-        str_conf_file="/etc/sysconfig/network/ifcfg-${str_if_name}"
-		if [ -f $str_conf_file ]; then
-			rm $str_conf_file
-		fi
-        echo "DEVICE=${str_if_name}" > $str_conf_file
-        echo "BOOTPROTO=static" >> $str_conf_file
-        echo "IPADDR=${str_v4ip}" >> $str_conf_file
-        echo "NETMASK=${str_v4mask}" >> $str_conf_file
-		echo "NETWORK=''" >> $str_conf_file
-        echo "STARTMODE=onboot" >> $str_conf_file
-        echo "USERCONTROL=no" >> $str_conf_file
-		ifup $str_if_name
-    #debian ubuntu
-    elif [ "$str_os_type" = "debian" ];then
-        str_conf_file="/etc/network/interfaces.d/${str_if_name}"
-		if [ -f $str_conf_file ]; then
-			rm $str_conf_file
-		fi
-        echo "auto ${str_if_name}" > $str_conf_file
-        echo "iface ${str_if_name} inet static" >> $str_conf_file
-        echo "  address ${str_v4ip}" >> $str_conf_file
-        echo "  netmask ${str_v4mask}" >> $str_conf_file
-		ifconfig $str_if_name up
-    else
-        # Write the info to the ifcfg file for redhat
-        str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_if_name}"
-		if [ -f $str_conf_file ]; then
-			rm $str_conf_file
-		fi
-        echo "DEVICE=${str_if_name}" > $str_conf_file
-        echo "BOOTPROTO=static" >> $str_conf_file
-        echo "NM_CONTROLLED=no" >> $str_conf_file
-        echo "IPADDR=${str_v4ip}" >> $str_conf_file
-        echo "NETMASK=${str_v4mask}" >> $str_conf_file
-        echo "ONBOOT=yes" >> $str_conf_file
-		ifup $str_if_name
-    fi
-}
-
-#change hostname permanently
-change_host_name()
-{
-    str_os_type=$1
-    str_hostname=$2
-
-    hostname $str_hostname
-
-    if [ "$str_os_type" = "sles" ];then
-        echo "Persistently changing the hostname not implemented yet."
-    #debian ubuntu
-    elif [ "$str_os_type" = "debian" ];then
-        conf_file="/etc/hostname"
-        echo "$str_hostname" > $conf_file
-    else
-        conf_file="/etc/sysconfig/network"
-        if [ ! -f $conf_file ]; then
-            touch $conf_file
-        fi
-        grep 'HOSTNAME' $conf_file 2>&1 > /dev/null
-        if [ $? -eq 0 ]; then
-            sed -i "s/HOSTNAME=.*/HOSTNAME=$str_hostname/" $conf_file
-        else
-            echo "HOSTNAME=$str_hostname" >> $conf_file
-        fi
-    fi
-    
-}
-
-str_os_type=$(get_os_type)
-echo "os_type=$str_os_type"
-if [ "$str_os_type" = "aix" ]; then
-	logger -t xcat "config_ops_bm_node dose not support AIX."
-	echo "config_ops_bm_node dose not support AIX."
-	exit 0
-fi
-
-#change the hostname
-if [[ -n "$1" ]]; then
-    change_host_name $str_os_type $1
-fi
-
-#Add the openstack ip to the node
-if [[ -n $2 ]]; then
-    ops_ip=$2
-	
-	if [[ -z $3 ]]; then
-        logger -t xcat "config_ops_bm_node: Please specify the netmask."
-		echo "config_ops_bm_node: Please specify the netmask."
-		exit 1
-	else
-		ops_mask=$3
-	fi
-
-	#figure out the install nic
-    if [[ -n $MACADDRESS ]]; then
-        pos=0
-        #mac has the following format: 01:02:03:04:05:0E!node5|01:02:03:05:0F!node6-eth1
-        for x in `echo "$MACADDRESS" | tr "|" "\n"`
-        do
-            node=""
-            mac=""
-            pos=$((pos+1))
-            i=`expr index $x !`
-            if [[ $i -gt 0 ]]; then
-                node=`echo ${x##*!}`
-                mac_tmp=`echo ${x%%!*}`
-            else
-                mac_tmp=$x
-            fi
-			
-            if [[ $pos -eq 1 ]]; then
-                mac1=$mac_tmp
-            fi
-			
-            if [[ "$PRIMARYNIC" = "$mac_tmp" ]]; then
-                mac=$mac_tmp
-                break
-            fi
-
-            if [[ -z "$PRIMARYNIC" ]] || [[ "$PRIMARYNIC" = "mac" ]]; then
-                if [[ -z $node ]] || [[ "$node" = "$NODE" ]]; then
-                    mac=$mac_tmp
-                    break
-                fi
-            fi
-        done
-
-        if [[ -z $mac ]]; then
-            if [[ -z "$PRIMARYNIC" ]] || [[ "$PRIMARYNIC" = "mac" ]]; then
-                mac=$mac1 #if nothing mathes, take the first mac
-            else
-                nic=$PRIMARYNIC #or the primary nic itself is the nic
-            fi
-        fi
-    else
-        logger -t xcat "config_ops_bm_node: no mac addresses are defined in the mac table for the node $NODE"
-        echo "config_ops_bm_node: no mac addresses are defined in the mac table for the node $NODE"
-        index=$((index+1))
-        continue
-    fi
-	echo "mac=$mac"
-    
-    #find the nic that has the mac
-    if [[ -z $nic ]];  then
-        #go to each nic to match the mac address
-        ret=`ifconfig |grep -i $mac 2>&1`;
-        if [ $? -eq 0 ]; then
-           nic=`echo $ret |head -n1|cut -d' ' -f 1`
-        else
-            logger -t xcat "config_ops_bm_node: The mac address for the network for $NODE is not defined."
-            echo "config_ops_bm_node: The mac address for the network for $NODE is not defined."
-        fi
-    fi
-    echo "nic=$nic"
-
-	#now setup the ip alias
-    setup_ip $str_os_type $nic:0 $ops_ip $ops_mask 
-fi
-
-
-
-
@@ -1,94 +0,0 @@
-#!/bin/sh 
-# IBM(c) 2014 EPL license http://www.eclipse.org/legal/epl-v10.html
-
-# xCAT post script for deconfiguring the openstack baremetal node.
-# The format is:
-# deconfig_ops_bm_node ops_ip
-
-
-get_os_type()
-{
-    #get os type
-	str_os_type=`uname | tr 'A-Z' 'a-z'`
-	str_temp=''
-	if [ "$str_os_type" = "linux" ];then
-		str_temp=`echo $OSVER | grep -E '(sles|suse)'`
-		if [ -f "/etc/debian_version" ];then
-			str_os_type="debian"
-		elif [ -f "/etc/SuSE-release" -o -n "$str_temp" ];then
-			str_os_type="sles"
-		else
-			str_os_type="redhat"
-		fi
-	else
-		str_os_type="aix"
-	fi
-	echo "$str_os_type"
-}
-
-#change hostname permanently
-change_host_name()
-{
-    str_os_type=$1
-    str_hostname=$2
-
-    hostname $str_hostname
-
-    if [ "$str_os_type" = "sles" ];then
-        echo "Persistently changing the hostname not implemented yet."
-    #debian ubuntu
-    elif [ "$str_os_type" = "debian" ];then
-        conf_file="/etc/hostname"
-        echo "$str_hostname" > $conf_file
-    else
-        conf_file="/etc/sysconfig/network"
-        if [ ! -f $conf_file ]; then
-            touch $conf_file
-        fi
-        grep 'HOSTNAME' $conf_file 2>&1 > /dev/null
-        if [ $? -eq 0 ]; then
-            sed -i "s/HOSTNAME=.*/HOSTNAME=$str_hostname/" $conf_file
-        else
-            echo "HOSTNAME=$str_hostname" >> $conf_file
-        fi
-    fi
-}
-
-
-str_os_type=$(get_os_type)
-echo "os_type=$str_os_type"
-
-if [ $str_os_type == "aix" ]; then
-	logger -t xcat "deconfig_ops_bm_node dose not support AIX."
-	echo "deconfig_ops_bm_node dose not support AIX."
-	exit 0
-fi
-
-#change the hostname
-#hostname $NODE
-change_host_name $str_os_type $NODE
-
-#remove the openstack ip from the node
-if [[ -n $1 ]]; then
-    ops_ip=$1
-	nic=$(ip addr | grep $ops_ip | awk '{print $NF}')	
-	echo "nic=$nic, ops_ip=$ops_ip"
-
-	ifconfig $nic del $ops_ip
- 
-	#delete the configuration file
-    if [ "$str_os_type" = "sles" ]; then
-        str_conf_file="/etc/sysconfig/network/ifcfg-$nic"
-    elif [ "$str_os_type" = "debian" ]; then  #debian ubuntu
-        str_conf_file="/etc/network/interfaces.d/$nic"
-    else #redhat
-        str_conf_file="/etc/sysconfig/network-scripts/ifcfg-$nic"
-    fi
-	if [ -f $str_conf_file ]; then
-		rm $str_conf_file
-	fi
-fi
-
-
-
-
@@ -1,102 +0,0 @@
-Summary: Executables and data of the xCAT baremetal driver for OpenStack
-Name: xCAT-OpenStack-baremetal
-Version: %(cat Version)
-Release: snap%(date +"%Y%m%d%H%M")
-Epoch: 4
-License: IBM
-Group: Applications/System
-Source: xCAT-OpenStack-baremetal-%{version}.tar.gz
-Packager: IBM Corp.
-Vendor: IBM Corp.
-Distribution: %{?_distribution:%{_distribution}}%{!?_distribution:%{_vendor}}
-Prefix: /opt/xcat
-BuildRoot: /var/tmp/%{name}-%{version}-%{release}-root
-
-%ifos linux
-BuildArch: noarch
-%endif
-
-
-Provides: xCAT-OpenStack-baremetal = %{epoch}:%{version}
-
-Requires: xCAT-client
-
-%description
-xCAT-OpenStack-baremetal provides the baremetal driver for OpenStack.
-
-%prep
-%setup -q -n xCAT-OpenStack-baremetal
-%build
-
-# Convert pods to man pages and html pages
-./xpod2man
-
-%install
-# The install phase puts all of the files in the paths they should be in when the rpm is
-# installed on a system.  The RPM_BUILD_ROOT is a simulated root file system and usually
-# has a value like: /var/tmp/xCAT-OpenStack-baremetal-2.0-snap200802270932-root
-rm -rf $RPM_BUILD_ROOT
-
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/bin
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/sbin
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/lib/python/xcat/openstack/baremetal
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/xcat/openstack/postscripts
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/man/man1
-mkdir -p $RPM_BUILD_ROOT/%{prefix}/share/doc/man1
-
-
-set +x
-
-cp -R lib/* $RPM_BUILD_ROOT/%{prefix}/lib
-cp share/xcat/openstack/postscripts/* $RPM_BUILD_ROOT/%{prefix}/share/xcat/openstack/postscripts
-
-
-# These were built dynamically in the build phase
-cp share/man/man1/* $RPM_BUILD_ROOT/%{prefix}/share/man/man1
-chmod 444 $RPM_BUILD_ROOT/%{prefix}/share/man/man1/*
-
-# These were built dynamically during the build phase
-cp share/doc/man1/* $RPM_BUILD_ROOT/%{prefix}/share/doc/man1
-chmod 644 $RPM_BUILD_ROOT/%{prefix}/share/doc/man1/*
-
-# These links get made in the RPM_BUILD_ROOT/prefix area
-ln -sf ../bin/xcatclient $RPM_BUILD_ROOT/%{prefix}/sbin/deploy_ops_bm_node
-ln -sf ../bin/xcatclient $RPM_BUILD_ROOT/%{prefix}/sbin/cleanup_ops_bm_node
-ln -sf ../bin/xcatclient $RPM_BUILD_ROOT/%{prefix}/bin/opsaddbmnode
-ln -sf ../bin/xcatclientnnr $RPM_BUILD_ROOT/%{prefix}/bin/opsaddimage
-
-set -x
-
-
-%clean
-# This step does not happen until *after* the %files packaging below
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-#%doc LICENSE.html
-# Just package everything that has been copied into RPM_BUILD_ROOT
-%{prefix}
-
-
-%changelog
-
-%post
-#copy the postscripts under /installl/postscripts directory on MN only
-if [ -f "/etc/xCATMN" ]; then
-	cp $RPM_INSTALL_PREFIX0/share/xcat/openstack/postscripts/* /install/postscripts/
-fi
-
-%preun
-#remove postscripts under /installl/postscripts directory on MN only
-if [ -f "/etc/xCATMN" ]; then
-	for fn in $RPM_INSTALL_PREFIX0/share/xcat/openstack/postscripts/*
-	do
-		bn=`basename $fn`
-		rm /install/postscripts/$bn
-	done
-fi
-exit 0
-
-
@@ -1,214 +0,0 @@
-#!/usr/bin/perl
-# IBM(c) 2007 EPL license http://www.eclipse.org/legal/epl-v10.html
-
-# First builds the xCAT summary man page from Synopsis of each man page.
-# Then converts all of the pod man pages into html (including links to each other)
-
-# We assume that this script is run in the xCAT-vlan-2.0 dir, so everything is
-# done relative to that.
-
-use strict;
-#use lib '.';
-use Pod::Man;
-use Pod::Html;
-
-my $poddir = 'pods';
-my $mandir = 'share/man';
-my $htmldir = 'share/doc';
-my $cachedir = '/tmp';
-
-my @pods = getPodList($poddir);
-#foreach (@pods) { print "$_\n"; } exit;
-
-# Build the cmd overview page.
-#writesummarypage("$poddir/man1/xcat.1.pod", @pods);
-
-# Build the man page for each pod.
-#mkdir($mandir) or die "Error: could not create $mandir.\n";
-print "Converting PODs to man pages...\n";
-foreach my $podfile (@pods) {
-    my $manfile = $podfile;
-    $manfile =~ s/^$poddir/$mandir/;      # change the beginning of the path
-    $manfile =~ s/\.pod$//;			# change the ending
-    my $mdir = $manfile;
-    $mdir =~ s|/[^/]*$||;			# get rid of the basename part
-	if (system("mkdir -p $mdir")) { die "Error: could not create $mdir.\n"; }
-	my ($section) = $podfile =~ /\.(\d+)\.pod$/;
-    convertpod2man($podfile, $manfile, $section);
-}
-
-my @dummyPods = createDummyPods($poddir, \@pods);
-
-# Build the html page for each pod.
-#mkdir($htmldir) or die "Error: could not create $htmldir.\n";
-print "Converting PODs to HTML pages...\n";
-# have to clear the cache, because old entries can cause a problem
-unlink("$cachedir/pod2htmd.tmp", "$cachedir/pod2htmi.tmp");
-foreach my $podfile (@pods) {
-    my $htmlfile = $podfile;
-    $htmlfile =~ s/^$poddir/$htmldir/;      # change the beginning of the path
-    $htmlfile =~ s/\.pod$/\.html/;			# change the ending
-    my $hdir = $htmlfile;
-    $hdir =~ s|/[^/]*$||;			# get rid of the basename part
-	if (system("mkdir -p $hdir")) { die "Error: could not create $hdir.\n"; }
-    #print "$podfile, $htmlfile, $poddir, $htmldir\n";
-    convertpod2html($podfile, $htmlfile, $poddir, $htmldir);
-}
-
-# Remove the dummy pods
-unlink @dummyPods;
-rmdir "$poddir/man7";
-
-exit;
-
-
-# To enable linking between the cmd man pages and the db man pages, need to:
-#	grep thru the cmd pods searching for references (L<>) to any section 5 man page
-#	if that pod does not exist, create an empty one that will satisfy pod2html
-#	keep track of all dummy pods created, so they can be removed later
-sub createDummyPods {
-	my ($poddir, $pods) = @_;
-	my $cmd = "grep -r -E 'L<.+\\([57]\\)\\|.+\\.[57]>' " . $poddir;
-	#print "Running cmd: ", $cmd, "\n";
-	my @lines = `$cmd`;
-	if ($?) { print "Error running:  $cmd\n"; print join('', @lines); }
-	#my @lines;
-	#system($cmd);
-	my @dummyPods;
-	foreach my $l (@lines) {
-		#print "$l\n";
-		my @matches = $l =~ /L<([^\(]+)\(([57])\)\|\1\.[57]>/g;		# get all the matches in the line
-		# The above line should create the array with every other entry being the man page name
-		# and every other entry is the section # (5 or 7)
-		my $cmd;
-		while ($cmd=shift @matches) {
-			#foreach my $m (@matches) {
-			my $section = shift @matches;
-			my $filename = "$poddir/man$section/$cmd.$section.pod";
-			#print "$filename\n";
-			if (!(grep /^$filename$/, @$pods) && !(grep /^$filename$/, @dummyPods)) { push @dummyPods, $filename; }
-		}
-	}
-	
-	
-	# Create these empty files
-	print "Creating empty linked-to files: ", join(', ', @dummyPods), "\n";
-	mkdir "$poddir/man7";
-	foreach my $d (@dummyPods) {
-		if (!open(TMP, ">>$d")) { warn "Could not create dummy pod file $d ($!)\n"; }
-		else { close TMP; }
-	}
-	
-	return @dummyPods;
-}
-
-# Recursively get the list of pod man page files.
-sub getPodList {
-	my $poddir = shift;
-	my @files;
-
-	# 1st get toplevel dir listing
-	opendir(DIR, $poddir) or die "Error: could not read $poddir.\n";
-	my @topdir = grep !/^\./, readdir(DIR);		# /
-	close(DIR);
-
-	# Now go thru each subdir (these are man1, man3, etc.)
-	foreach my $mandir (@topdir) {
-		opendir(DIR, "$poddir/$mandir") or die "Error: could not read $poddir/$mandir.\n";
-		my @dir = grep !/^\./, readdir(DIR);		# /
-		close(DIR);
-		foreach my $file (@dir) {
-			push @files, "$poddir/$mandir/$file";
-		}
-	}
-	return sort @files;
-}
-
-
-# Create the xcat man page that gives a summary description of each xcat cmd.
-# Not used.
-sub writesummarypage {
-	my $file = shift;       # relative path file name of the man page
-	# the rest of @_ contains the pod files that describe each cmd
-
-	open(FILE, ">$file") or die "Error: could not open $file for writing.\n";
-
-	print FILE <<'EOS1';
-=head1 NAME
-
-B<xcat> - extreme Cluster Administration Tool.
-
-=head1 DESCRIPTION
-
-Extreme Cluster Administration Toolkit (xCAT). xCAT is a scalable distributed computing management
-and provisioning tool that provides a unified interface for hardware control, discovery, and
-OS diskful/diskfree deployment.
-
-
-=head1 XCAT DATABASE
-
-All of the cluster configuration information is in the xCAT database.  See L<xcatdb(5)|xcatdb.5> for
-descriptions of every table in the database.
-
-=head1 XCAT COMMANDS
-
-What follows is a short description of each xCAT command.  To get more information about a particular
-command, see its man page.  Note that the commands are listed in alphabetical order B<within each section>,
-i.e. all the commands in section 1, then the commands in section 3, etc.
-
-=over 12
-EOS1
-
-# extract the summary for each cmd from its man page
-foreach my $manpage (@_) {
-	my ($sectionnum) = $manpage =~ /\.(\d+)\.pod$/;
-	# Suck in the whole file, then we will parse it.
-	open(MANPAGE, "$manpage") or die "Error: could not open $manpage for reading.\n";
-	my @contents = <MANPAGE>;
-	my $wholemanpage = join('', @contents);
-	close(MANPAGE);
-	# This regex matches: optional space, =head1, space, title, space, cmd, space, description, newline
-	my ($cmd, $description) = $wholemanpage =~ /^\s*=head1\s+\S+\s+(\S+)\s+(.+?)\n/si;
-	if (!defined($cmd)) { print "Warning: $manpage is not in a recognized structure.  It will be ignored.\n"; next; }
-	if (!defined($description)) { print "Warning: $manpage does not have a description for $cmd.  It will be ignored.\n"; next; }
-	$cmd =~ s/^.<(.+)>$/$1/;		# if the cmd name has pod formatting around it, strip it off
-	$description =~ s/^-\s*//;		# if the description has a leading hypen, strip it off
-	print FILE "\n=item L<$cmd($sectionnum)|$cmd.$sectionnum>\n\n".$description."\n";
-}
-
-# Artificially add the xcattest cmd, because the xCAT-test rpm will add this
-print FILE "\n=item L<xcattest(1)|xcattest.1>\n\nRun automated xCAT test cases.\n";
-
-	print FILE <<"EOS3";
-
-=back
-EOS3
-
-	close FILE;
-}
-
-
-# Create the html page for one pod.
-sub convertpod2html {
-	my ($podfile, $htmlfile, $poddir, $htmldir) = @_;
-
-	#TODO: use --css=<stylesheet> and --title=<pagetitle> to make the pages look better
-	pod2html($podfile,
-			"--outfile=$htmlfile",
-			"--podpath=man1",
-			"--podroot=$poddir",
-			"--htmldir=$htmldir",
-			"--recurse",
-			"--cachedir=$cachedir",
-			);
-
-}
-
-
-# Create the man page for one pod.
-sub convertpod2man {
-	my ($podfile, $manfile, $section) = @_;
-
-	my $parser = Pod::Man->new(section => $section);
-    $parser->parse_from_file($podfile, $manfile);
-}
@@ -1,326 +0,0 @@
-<html xmlns:o="urn:schemas-microsoft-com:office:office"
-xmlns:w="urn:schemas-microsoft-com:office:word"
-xmlns="http://www.w3.org/TR/REC-html40">
-
-<head>
-<meta http-equiv=Content-Type content="text/html; charset=windows-1252">
-<meta name=ProgId content=Word.Document>
-<meta name=Generator content="Microsoft Word 9">
-<meta name=Originator content="Microsoft Word 9">
-<title>Eclipse Public License - Version 1.0</title>
-<!--[if gte mso 9]><xml>
- <o:DocumentProperties>
-  <o:Revision>2</o:Revision>
-  <o:TotalTime>3</o:TotalTime>
-  <o:Created>2004-03-05T23:03:00Z</o:Created>
-  <o:LastSaved>2004-03-05T23:03:00Z</o:LastSaved>
-  <o:Pages>4</o:Pages>
-  <o:Words>1626</o:Words>
-  <o:Characters>9270</o:Characters>
-   <o:Lines>77</o:Lines>
-  <o:Paragraphs>18</o:Paragraphs>
-  <o:CharactersWithSpaces>11384</o:CharactersWithSpaces>
-  <o:Version>9.4402</o:Version>
- </o:DocumentProperties>
-</xml><![endif]--><!--[if gte mso 9]><xml>
- <w:WordDocument>
-  <w:TrackRevisions/>
- </w:WordDocument>
-</xml><![endif]-->
-<style>
-<!--
- /* Font Definitions */
-@font-face
-	{font-family:Tahoma;
-	panose-1:2 11 6 4 3 5 4 4 2 4;
-	mso-font-charset:0;
-	mso-generic-font-family:swiss;
-	mso-font-pitch:variable;
-	mso-font-signature:553679495 -2147483648 8 0 66047 0;}
- /* Style Definitions */
-p.MsoNormal, li.MsoNormal, div.MsoNormal
-	{mso-style-parent:"";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:12.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";}
-p
-	{margin-right:0in;
-	mso-margin-top-alt:auto;
-	mso-margin-bottom-alt:auto;
-	margin-left:0in;
-	mso-pagination:widow-orphan;
-	font-size:12.0pt;
-	font-family:"Times New Roman";
-	mso-fareast-font-family:"Times New Roman";}
-p.BalloonText, li.BalloonText, div.BalloonText
-	{mso-style-name:"Balloon Text";
-	margin:0in;
-	margin-bottom:.0001pt;
-	mso-pagination:widow-orphan;
-	font-size:8.0pt;
-	font-family:Tahoma;
-	mso-fareast-font-family:"Times New Roman";}
-@page Section1
-	{size:8.5in 11.0in;
-	margin:1.0in 1.25in 1.0in 1.25in;
-	mso-header-margin:.5in;
-	mso-footer-margin:.5in;
-	mso-paper-source:0;}
-div.Section1
-	{page:Section1;}
-->
-</style>
-</head>
-
-<body lang=EN-US style='tab-interval:.5in'>
-
-<div class=Section1>
-
-<p align=center style='text-align:center'><b>Eclipse Public License - v 1.0</b>
-</p>
-
-<p><span style='font-size:10.0pt'>THE ACCOMPANYING PROGRAM IS PROVIDED UNDER
-THE TERMS OF THIS ECLIPSE PUBLIC LICENSE (&quot;AGREEMENT&quot;). ANY USE,
-REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE
-OF THIS AGREEMENT.</span> </p>
-
-<p><b><span style='font-size:10.0pt'>1. DEFINITIONS</span></b> </p>
-
-<p><span style='font-size:10.0pt'>&quot;Contribution&quot; means:</span> </p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>a)
-in the case of the initial Contributor, the initial code and documentation
-distributed under this Agreement, and<br clear=left>
-b) in the case of each subsequent Contributor:</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>i)
-changes to the Program, and</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>ii)
-additions to the Program;</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>where
-such changes and/or additions to the Program originate from and are distributed
-by that particular Contributor. A Contribution 'originates' from a Contributor
-if it was added to the Program by such Contributor itself or anyone acting on
-such Contributor's behalf. Contributions do not include additions to the
-Program which: (i) are separate modules of software distributed in conjunction
-with the Program under their own license agreement, and (ii) are not derivative
-works of the Program. </span></p>
-
-<p><span style='font-size:10.0pt'>&quot;Contributor&quot; means any person or
-entity that distributes the Program.</span> </p>
-
-<p><span style='font-size:10.0pt'>&quot;Licensed Patents &quot; mean patent
-claims licensable by a Contributor which are necessarily infringed by the use
-or sale of its Contribution alone or when combined with the Program. </span></p>
-
-<p><span style='font-size:10.0pt'>&quot;Program&quot; means the Contributions
-distributed in accordance with this Agreement.</span> </p>
-
-<p><span style='font-size:10.0pt'>&quot;Recipient&quot; means anyone who
-receives the Program under this Agreement, including all Contributors.</span> </p>
-
-<p><b><span style='font-size:10.0pt'>2. GRANT OF RIGHTS</span></b> </p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>a)
-Subject to the terms of this Agreement, each Contributor hereby grants Recipient
-a non-exclusive, worldwide, royalty-free copyright license to<span
-style='color:red'> </span>reproduce, prepare derivative works of, publicly
-display, publicly perform, distribute and sublicense the Contribution of such
-Contributor, if any, and such derivative works, in source code and object code
-form.</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>b)
-Subject to the terms of this Agreement, each Contributor hereby grants
-Recipient a non-exclusive, worldwide,<span style='color:green'> </span>royalty-free
-patent license under Licensed Patents to make, use, sell, offer to sell, import
-and otherwise transfer the Contribution of such Contributor, if any, in source
-code and object code form. This patent license shall apply to the combination
-of the Contribution and the Program if, at the time the Contribution is added
-by the Contributor, such addition of the Contribution causes such combination
-to be covered by the Licensed Patents. The patent license shall not apply to
-any other combinations which include the Contribution. No hardware per se is
-licensed hereunder. </span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>c)
-Recipient understands that although each Contributor grants the licenses to its
-Contributions set forth herein, no assurances are provided by any Contributor
-that the Program does not infringe the patent or other intellectual property
-rights of any other entity. Each Contributor disclaims any liability to Recipient
-for claims brought by any other entity based on infringement of intellectual
-property rights or otherwise. As a condition to exercising the rights and
-licenses granted hereunder, each Recipient hereby assumes sole responsibility
-to secure any other intellectual property rights needed, if any. For example,
-if a third party patent license is required to allow Recipient to distribute
-the Program, it is Recipient's responsibility to acquire that license before
-distributing the Program.</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>d)
-Each Contributor represents that to its knowledge it has sufficient copyright
-rights in its Contribution, if any, to grant the copyright license set forth in
-this Agreement. </span></p>
-
-<p><b><span style='font-size:10.0pt'>3. REQUIREMENTS</span></b> </p>
-
-<p><span style='font-size:10.0pt'>A Contributor may choose to distribute the
-Program in object code form under its own license agreement, provided that:</span>
-</p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>a)
-it complies with the terms and conditions of this Agreement; and</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>b)
-its license agreement:</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>i)
-effectively disclaims on behalf of all Contributors all warranties and
-conditions, express and implied, including warranties or conditions of title
-and non-infringement, and implied warranties or conditions of merchantability
-and fitness for a particular purpose; </span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>ii)
-effectively excludes on behalf of all Contributors all liability for damages,
-including direct, indirect, special, incidental and consequential damages, such
-as lost profits; </span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>iii)
-states that any provisions which differ from this Agreement are offered by that
-Contributor alone and not by any other party; and</span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>iv)
-states that source code for the Program is available from such Contributor, and
-informs licensees how to obtain it in a reasonable manner on or through a
-medium customarily used for software exchange.<span style='color:blue'> </span></span></p>
-
-<p><span style='font-size:10.0pt'>When the Program is made available in source
-code form:</span> </p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>a)
-it must be made available under this Agreement; and </span></p>
-
-<p class=MsoNormal style='margin-left:.5in'><span style='font-size:10.0pt'>b) a
-copy of this Agreement must be included with each copy of the Program. </span></p>
-
-<p><span style='font-size:10.0pt'>Contributors may not remove or alter any
-copyright notices contained within the Program. </span></p>
-
-<p><span style='font-size:10.0pt'>Each Contributor must identify itself as the
-originator of its Contribution, if any, in a manner that reasonably allows
-subsequent Recipients to identify the originator of the Contribution. </span></p>
-
-<p><b><span style='font-size:10.0pt'>4. COMMERCIAL DISTRIBUTION</span></b> </p>
-
-<p><span style='font-size:10.0pt'>Commercial distributors of software may
-accept certain responsibilities with respect to end users, business partners
-and the like. While this license is intended to facilitate the commercial use
-of the Program, the Contributor who includes the Program in a commercial
-product offering should do so in a manner which does not create potential
-liability for other Contributors. Therefore, if a Contributor includes the
-Program in a commercial product offering, such Contributor (&quot;Commercial
-Contributor&quot;) hereby agrees to defend and indemnify every other
-Contributor (&quot;Indemnified Contributor&quot;) against any losses, damages and
-costs (collectively &quot;Losses&quot;) arising from claims, lawsuits and other
-legal actions brought by a third party against the Indemnified Contributor to
-the extent caused by the acts or omissions of such Commercial Contributor in
-connection with its distribution of the Program in a commercial product
-offering. The obligations in this section do not apply to any claims or Losses
-relating to any actual or alleged intellectual property infringement. In order
-to qualify, an Indemnified Contributor must: a) promptly notify the Commercial
-Contributor in writing of such claim, and b) allow the Commercial Contributor
-to control, and cooperate with the Commercial Contributor in, the defense and
-any related settlement negotiations. The Indemnified Contributor may participate
-in any such claim at its own expense.</span> </p>
-
-<p><span style='font-size:10.0pt'>For example, a Contributor might include the
-Program in a commercial product offering, Product X. That Contributor is then a
-Commercial Contributor. If that Commercial Contributor then makes performance
-claims, or offers warranties related to Product X, those performance claims and
-warranties are such Commercial Contributor's responsibility alone. Under this
-section, the Commercial Contributor would have to defend claims against the
-other Contributors related to those performance claims and warranties, and if a
-court requires any other Contributor to pay any damages as a result, the
-Commercial Contributor must pay those damages.</span> </p>
-
-<p><b><span style='font-size:10.0pt'>5. NO WARRANTY</span></b> </p>
-
-<p><span style='font-size:10.0pt'>EXCEPT AS EXPRESSLY SET FORTH IN THIS
-AGREEMENT, THE PROGRAM IS PROVIDED ON AN &quot;AS IS&quot; BASIS, WITHOUT
-WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING,
-WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely
-responsible for determining the appropriateness of using and distributing the
-Program and assumes all risks associated with its exercise of rights under this
-Agreement , including but not limited to the risks and costs of program errors,
-compliance with applicable laws, damage to or loss of data, programs or
-equipment, and unavailability or interruption of operations. </span></p>
-
-<p><b><span style='font-size:10.0pt'>6. DISCLAIMER OF LIABILITY</span></b> </p>
-
-<p><span style='font-size:10.0pt'>EXCEPT AS EXPRESSLY SET FORTH IN THIS
-AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY
-OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF
-THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF
-THE POSSIBILITY OF SUCH DAMAGES.</span> </p>
-
-<p><b><span style='font-size:10.0pt'>7. GENERAL</span></b> </p>
-
-<p><span style='font-size:10.0pt'>If any provision of this Agreement is invalid
-or unenforceable under applicable law, it shall not affect the validity or
-enforceability of the remainder of the terms of this Agreement, and without
-further action by the parties hereto, such provision shall be reformed to the
-minimum extent necessary to make such provision valid and enforceable.</span> </p>
-
-<p><span style='font-size:10.0pt'>If Recipient institutes patent litigation
-against any entity (including a cross-claim or counterclaim in a lawsuit)
-alleging that the Program itself (excluding combinations of the Program with
-other software or hardware) infringes such Recipient's patent(s), then such
-Recipient's rights granted under Section 2(b) shall terminate as of the date
-such litigation is filed. </span></p>
-
-<p><span style='font-size:10.0pt'>All Recipient's rights under this Agreement
-shall terminate if it fails to comply with any of the material terms or
-conditions of this Agreement and does not cure such failure in a reasonable
-period of time after becoming aware of such noncompliance. If all Recipient's
-rights under this Agreement terminate, Recipient agrees to cease use and
-distribution of the Program as soon as reasonably practicable. However,
-Recipient's obligations under this Agreement and any licenses granted by
-Recipient relating to the Program shall continue and survive. </span></p>
-
-<p><span style='font-size:10.0pt'>Everyone is permitted to copy and distribute
-copies of this Agreement, but in order to avoid inconsistency the Agreement is
-copyrighted and may only be modified in the following manner. The Agreement
-Steward reserves the right to publish new versions (including revisions) of
-this Agreement from time to time. No one other than the Agreement Steward has
-the right to modify this Agreement. The Eclipse Foundation is the initial
-Agreement Steward. The Eclipse Foundation may assign the responsibility to
-serve as the Agreement Steward to a suitable separate entity. Each new version
-of the Agreement will be given a distinguishing version number. The Program
-(including Contributions) may always be distributed subject to the version of
-the Agreement under which it was received. In addition, after a new version of
-the Agreement is published, Contributor may elect to distribute the Program
-(including its Contributions) under the new version. Except as expressly stated
-in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to
-the intellectual property of any Contributor under this Agreement, whether
-expressly, by implication, estoppel or otherwise. All rights in the Program not
-expressly granted under this Agreement are reserved.</span> </p>
-
-<p><span style='font-size:10.0pt'>This Agreement is governed by the laws of the
-State of New York and the intellectual property laws of the United States of
-America. No party to this Agreement will bring a legal action under this
-Agreement more than one year after the cause of action arose. Each party waives
-its rights to a jury trial in any resulting litigation.</span> </p>
-
-<p class=MsoNormal><![if !supportEmptyParas]>&nbsp;<![endif]><o:p></o:p></p>
-
-</div>
-
-</body>
-
-</html>
@@ -1,15 +0,0 @@
-AllCops:
-  Excludes:
-    - test/**
-    - vendor/**
-
-AlignParameters:
-  Enabled: false
-Encoding:
-  Enabled: false
-HashSyntax:
-  Enabled: false
-LineLength:
-  Enabled: false
-MethodLength:
-  Max: 30
@@ -1,9 +0,0 @@
-rvm:
-  - 1.9.3
-  - 2.0.0
-before_script:
-  - bundle exec berks install
-script:
-  - bundle exec foodcritic -f any . --tags ~FC007 --tags ~FC015 --tags ~FC023
-  # - bundle exec rspec --color --format progress
-  - bundle exec rubocop
@@ -1,7 +0,0 @@
-site :opscode
-metadata
-
-group :integration do
-  cookbook 'apt', '~> 2.0'
-  cookbook 'yum', '~> 2.0'
-end
@@ -1,198 +0,0 @@
-apache2 Cookbook Changelog
-==========================
-This file is used to list changes made in each version of the apache2 cookbook.
-
-v1.8.4
------
-### Bug
- **[COOK-3769](https://tickets.opscode.com/browse/COOK-3769)** - Fix a critical bug where the `apache_module` could not enable modules
-
-
-v1.8.2
------
-### Bug
- **[COOK-3766](https://tickets.opscode.com/browse/COOK-3766)** - Fix an issue where the `mod_ssl` recipe fails due to a missing attribute
-
-
-v1.8.0
------
-### Bug
- **[COOK-3680](https://tickets.opscode.com/browse/COOK-3680)** - Update template paths
- **[COOK-3570](https://tickets.opscode.com/browse/COOK-3570)** - Apache cookbook breaks on RHEL / CentOS 6
- **[COOK-2944](https://tickets.opscode.com/browse/COOK-2944)** - Fix foodcritic failures
- **[COOK-2893](https://tickets.opscode.com/browse/COOK-2893)** - Improve mod_auth_openid recipe with guards and idempotency
- **[COOK-2758](https://tickets.opscode.com/browse/COOK-2758)** - Fix use of non-existent attribute
-
-### New Feature
- **[COOK-3665](https://tickets.opscode.com/browse/COOK-3665)** - Add recipe for mod_userdir
- **[COOK-3646](https://tickets.opscode.com/browse/COOK-3646)** - Add recipe for mod_cloudflare
- **[COOK-3213](https://tickets.opscode.com/browse/COOK-3213)** - Add recipe for mod_info
-
-### Improvement
- **[COOK-3656](https://tickets.opscode.com/browse/COOK-3656)** - Parameterize apache2 binary
- **[COOK-3562](https://tickets.opscode.com/browse/COOK-3562)** - Allow mod_proxy settings to be configured as attributes
- **[COOK-3326](https://tickets.opscode.com/browse/COOK-3326)** - Fix default_test to use ServerTokens attribute
- **[COOK-2635](https://tickets.opscode.com/browse/COOK-2635)** - Add support for SVG mime types
- **[COOK-2598](https://tickets.opscode.com/browse/COOK-2598)** - FastCGI Module only works on Debian-based platforms
- **[COOK-1984](https://tickets.opscode.com/browse/COOK-1984)** - Add option to configure the address apache listens to
-
-
-v1.7.0
------
-### Improvement
-
- [COOK-3073]: make access.log location configurable per-platform
- [COOK-3074]: don't hardcode the error.log location in the default site config
- [COOK-3268]: don't hardcode DocumentRoot and cgi-bin locations in `default_site`
-
-### New Feature
-
- [COOK-3184]: Add `mod_filter` recipe to Apache2-cookbook
- [COOK-3236]: Add `mod_action` recipe to Apache2-cookbook
-
-v1.6.6
------
-1.6.4 had a missed step in the automated release, long live 1.6.6.
-
-### Bug
-
- [COOK-3018]: apache2_module does duplicate delayed restart of apache2 service when conf = true
- [COOK-3027]: Default site enable true, then false, does not disable default site
- [COOK-3109]: fix apache lib_dir arch attribute regexp
-
-v1.6.2
------
- [COOK-2535] - `mod_auth_openid` requires libtool to run autogen.sh
- [COOK-2667] - Typo in usage documentation
- [COOK-2461] - `apache2::mod_auth_openid` fails on some ubuntu systems
- [COOK-2720] - Apache2 minitest helper function `ran_recipe` is not portable
-
-v1.6.0
------
- [COOK-2372] - apache2 mpm_worker: add ServerLimit attribute (default to 16)
-
-v1.5.0
------
-The `mod_auth_openid` attributes are changed. The upstream maintainer deprecated the older release versions, and the source repository has releases available at specific SHA1SUM references. The new attribute, `node['apache']['mod_auth_openid']['ref']` is used to set this.
-
- [COOK-2198] - `apache::mod_auth_openid` compiles from source, but does not install make on debian/ubuntu
- [COOK-2224] - version conflict between cucumber and other gems
- [COOK-2248] - `apache2::mod_php5` uses `not_if` "which php" without ensuring package 'which' is installed
- [COOK-2269] - Set allow list for mod_status incase external monitor scripts need
- [COOK-2276] - cookbook apache2 documentation regarding listening ports doesn't match default attributes
- [COOK-2296] - `mod_auth_openid` doesn't have tags/releases for the version I need for features and fixes
- [COOK-2323] - Add Oracle linux support
-
-v1.4.2
------
- [COOK-1721] - fix logrotate recipe
-
-v1.4.0
------
- [COOK-1456] - iptables enhancements
- [COOK-1473] - apache2 does not disable default site when setting "`default_site_enabled`" back to false
- [COOK-1824] - the apache2 cookbook needs to specify which binary is used on rhel platform
- [COOK-1916] - Download location wrong for apache2 `mod_auth_openid` >= 0.7
- [COOK-1917] - Improve `mod_auth_openid` recipe to handle module upgrade more gracefully
- [COOK-2029] - apache2 restarts on every run on RHEL and friends, generate-module-list on every run.
- [COOK-2036] - apache2: Cookbook style
-
-v1.3.2
------
- [COOK-1804] - fix `web_app` definition parameter so site can be disabled.
-
-v1.3.0
------
- [COOK-1738] - Better configuration for `mod_include` and some overrides in `web_app` definition
- [COOK-1470] - Change SSL Ciphers to Mitigate BEAST attack
-
-v1.2.0
------
- [COOK-692] - delete package conf.d files in module recipes, for EL
- [COOK-1693] - Foodcritic finding for unnecessary string interpolation
- [COOK-1757] - platform_family and better style / usage practices
-
-v1.1.16
-------
-re-releasing as .16 due to error on tag 1.1.14
-
- [COOK-1466] - add `mod_auth_cas` recipe
- [COOK-1609] - apache2 changes ports.conf twice per run when using apache2::mod_ssl
-
-v1.1.12
-------
- [COOK-1436] - restore apache2 web_app definition
- [COOK-1356] - allow ExtendedStatus via attribute
- [COOK-1403] - add mod_fastcgi recipe
-
-v1.1.10
-------
- [COOK-1315] - allow the default site to not be enabled
- [COOK-1328] - cookbook tests (minitest, cucumber)
-
-v1.1.8
------
- Some platforms with minimal installations that don't have perl won't have a `node['languages']['perl']` attribute, so remove the conditional and rely on the power of idempotence in the package resource.
- [COOK-1214] - address foodcritic warnings
- [COOK-1180] - add `mod_logio` and fix `mod_proxy`
-
-v1.1.6
------
-FreeBSD users: This release requires the `freebsd` cookbook. See README.md.
-
- [COOK-1025] - freebsd support in mod_php5 recipe
-
-v1.1.4
------
- [COOK-1100] - support amazon linux
-
-v1.1.2
------
- [COOK-996] - apache2::mod_php5 can cause PHP and module API mismatches
- [COOK-1083] - return string for v_f_p and use correct value for default
-
-v1.1.0
------
- [COOK-861] - Add `mod_perl` and apreq2
- [COOK-941] - fix `mod_auth_openid` on FreeBSD
- [COOK-1021] - add a commented-out LoadModule directive to keep apxs happy
- [COOK-1022] - consistency for icondir attribute
- [COOK-1023] - fix platform test for attributes
- [COOK-1024] - fix a2enmod script so it runs cleanly on !bash
- [COOK-1026] - fix `error_log` location on FreeBSD
-
-v1.0.8
------
- COOK-548 - directory resource doesn't have backup parameter
-
-v1.0.6
------
- COOK-915 - update to `mod_auth_openid` version 0.6, see __Recipes/mod_auth_openid__ below.
- COOK-548 - Add support for FreeBSD.
-
-v1.0.4
------
- COOK-859 - don't hardcode module paths
-
-v1.0.2
------
- Tickets resolved in this release: COOK-788, COOK-782, COOK-780
-
-v1.0.0
------
- Red Hat family support is greatly improved, all recipes except `god_monitor` converge.
- Recipe `mod_auth_openid` now works on RHEL family distros
- Recipe `mod_php5` will now remove config from package on RHEL family so it doesn't conflict with the cookbook's.
- Added `php5.conf.erb` template for `mod_php5` recipe.
- Create the run state directory for `mod_fcgid` to prevent a startup error on RHEL version 6.
- New attribute `node['apache']['lib_dir']` to handle lib vs lib64 on RHEL family distributions.
- New attribute `node['apache']['group']`.
- Scientific Linux support added.
- Use a file resource instead of the generate-module-list executed perl script on RHEL family.
- "default" site can now be disabled.
- web_app now has an "enable" parameter.
- Support for dav_fs apache module.
- Tickets resolved in this release: COOK-754, COOK-753, COOK-665, COOK-624, COOK-579, COOK-519, COOK-518
- Fix node references in template for a2dissite
- Use proper user and group attributes on files and templates.
- Replace the anemic README.rdoc with this new and improved superpowered README.md :).
@@ -1,257 +0,0 @@
-# Contributing to Opscode Cookbooks
-
-We are glad you want to contribute to Opscode Cookbooks! The first
-step is the desire to improve the project.
-
-You can find the answers to additional frequently asked questions
-[on the wiki](http://wiki.opscode.com/display/chef/How+to+Contribute).
-
-You can find additional information about
-[contributing to cookbooks](http://wiki.opscode.com/display/chef/How+to+Contribute+to+Opscode+Cookbooks)
-on the wiki as well.
-
-## Quick-contribute
-
-* Create an account on our [bug tracker](http://tickets.opscode.com)
-* Sign our contributor agreement (CLA)
-[ online](https://secure.echosign.com/public/hostedForm?formid=PJIF5694K6L)
-(keep reading if you're contributing on behalf of your employer)
-* Create a ticket for your change on the
-  [bug tracker](http://tickets.opscode.com)
-* Link to your patch as a rebased git branch or pull request from the
-  ticket
-* Resolve the ticket as fixed
-
-We regularly review contributions and will get back to you if we have
-any suggestions or concerns.
-
-## The Apache License and the CLA/CCLA
-
-Licensing is very important to open source projects, it helps ensure
-the software continues to be available under the terms that the author
-desired. Chef uses the Apache 2.0 license to strike a balance between
-open contribution and allowing you to use the software however you
-would like to.
-
-The license tells you what rights you have that are provided by the
-copyright holder. It is important that the contributor fully
-understands what rights they are licensing and agrees to them.
-Sometimes the copyright holder isn't the contributor, most often when
-the contributor is doing work for a company.
-
-To make a good faith effort to ensure these criteria are met, Opscode
-requires a Contributor License Agreement (CLA) or a Corporate
-Contributor License Agreement (CCLA) for all contributions. This is
-without exception due to some matters not being related to copyright
-and to avoid having to continually check with our lawyers about small
-patches.
-
-It only takes a few minutes to complete a CLA, and you retain the
-copyright to your contribution.
-
-You can complete our contributor agreement (CLA)
-[ online](https://secure.echosign.com/public/hostedForm?formid=PJIF5694K6L).
-If you're contributing on behalf of your employer, have your employer
-fill out our
-[Corporate CLA](https://secure.echosign.com/public/hostedForm?formid=PIE6C7AX856)
-instead.
-
-## Ticket Tracker (JIRA)
-
-The [ticket tracker](http://tickets.opscode.com) is the most important
-documentation for the code base. It provides significant historical
-information, such as:
-
-* Which release a bug fix is included in
-* Discussion regarding the design and merits of features
-* Error output to aid in finding similar bugs
-
-Each ticket should aim to fix one bug or add one feature.
-
-## Using git
-
-You can get a quick copy of the repository for this cookbook by
-running `git clone
-git://github.com/opscode-coobkooks/COOKBOOKNAME.git`.
-
-For collaboration purposes, it is best if you create a Github account
-and fork the repository to your own account. Once you do this you will
-be able to push your changes to your Github repository for others to
-see and use.
-
-If you have another repository in your GitHub account named the same
-as the cookbook, we suggest you suffix the repository with -cookbook.
-
-### Branches and Commits
-
-You should submit your patch as a git branch named after the ticket,
-such as COOK-1337. This is called a _topic branch_ and allows users to
-associate a branch of code with the ticket.
-
-It is a best practice to have your commit message have a _summary
-line_ that includes the ticket number, followed by an empty line and
-then a brief description of the commit. This also helps other
-contributors understand the purpose of changes to the code.
-
-    [COOK-1757] - platform_family and style
-
-    * use platform_family for platform checking
-    * update notifies syntax to "resource_type[resource_name]" instead of
-      resources() lookup
-    * COOK-692 - delete config files dropped off by packages in conf.d
-    * dropped debian 4 support because all other platforms have the same
-      values, and it is older than "old stable" debian release
-
-Remember that not all users use Chef in the same way or on the same
-operating systems as you, so it is helpful to be clear about your use
-case and change so they can understand it even when it doesn't apply
-to them.
-
-### Github and Pull Requests
-
-All of Opscode's open source cookbook projects are available on
-[Github](http://www.github.com/opscode-cookbooks).
-
-We don't require you to use Github, and we will even take patch diffs
-attached to tickets on the tracker. However Github has a lot of
-convenient features, such as being able to see a diff of changes
-between a pull request and the main repository quickly without
-downloading the branch.
-
-If you do choose to use a pull request, please provide a link to the
-pull request from the ticket __and__ a link to the ticket from the
-pull request. Because pull requests only have two states, open and
-closed, we can't easily filter pull requests that are waiting for a
-reply from the author for various reasons.
-
-### More information
-
-Additional help with git is available on the
-[Working with Git](http://wiki.opscode.com/display/chef/Working+with+Git)
-wiki page.
-
-## Functional and Unit Tests
-
-This cookbook is set up to run tests under
-[Opscode's test-kitchen](https://github.com/opscode/test-kitchen). It
-uses minitest-chef to run integration tests after the node has been
-converged to verify that the state of the node.
-
-Test kitchen should run completely without exception using the default
-[baseboxes provided by Opscode](https://github.com/opscode/bento).
-Because Test Kitchen creates VirtualBox machines and runs through
-every configuration in the Kitchenfile, it may take some time for
-these tests to complete.
-
-If your changes are only for a specific recipe, run only its
-configuration with Test Kitchen. If you are adding a new recipe, or
-other functionality such as a LWRP or definition, please add
-appropriate tests and ensure they run with Test Kitchen.
-
-If any don't pass, investigate them before submitting your patch.
-
-Any new feature should have unit tests included with the patch with
-good code coverage to help protect it from future changes. Similarly,
-patches that fix a bug or regression should have a _regression test_.
-Simply put, this is a test that would fail without your patch but
-passes with it. The goal is to ensure this bug doesn't regress in the
-future. Consider a regular expression that doesn't match a certain
-pattern that it should, so you provide a patch and a test to ensure
-that the part of the code that uses this regular expression works as
-expected. Later another contributor may modify this regular expression
-in a way that breaks your use cases. The test you wrote will fail,
-signalling to them to research your ticket and use case and accounting
-for it.
-
-If you need help writing tests, please ask on the Chef Developer's
-mailing list, or the #chef-hacking IRC channel.
-
-## Code Review
-
-Opscode regularly reviews code contributions and provides suggestions
-for improvement in the code itself or the implementation.
-
-We find contributions by searching the ticket tracker for _resolved_
-tickets with a status of _fixed_. If we have feedback we will reopen
-the ticket and you should resolve it again when you've made the
-changes or have a response to our feedback. When we believe the patch
-is ready to be merged, we will tag the _Code Reviewed_ field with
-_Reviewed_.
-
-Depending on the project, these tickets are then merged within a week
-or two, depending on the current release cycle.
-
-## Release Cycle
-
-The versioning for Opscode Cookbook projects is X.Y.Z.
-
-* X is a major release, which may not be fully compatible with prior
-  major releases
-* Y is a minor release, which adds both new features and bug fixes
-* Z is a patch release, which adds just bug fixes
-
-A released version of a cookbook will end in an even number, e.g.
-"1.2.4" or "0.8.0". When development for the next version of the
-cookbook begins, the "Z" patch number is incremented to the next odd
-number, however the next release of the cookbook may be a major or
-minor incrementing version.
-
-Releases of Opscode's cookbooks are usually announced on the Chef user
-mailing list. Releases of several cookbooks may be batched together
-and announced on the [Opscode Blog](http://www.opscode.com/blog).
-
-## Working with the community
-
-These resources will help you learn more about Chef and connect to
-other members of the Chef community:
-
-* [chef](http://lists.opscode.com/sympa/info/chef) and
-  [chef-dev](http://lists.opscode.com/sympa/info/chef-dev) mailing
-  lists
-* #chef and #chef-hacking IRC channels on irc.freenode.net
-* [Community Cookbook site](http://community.opscode.com)
-* [Chef wiki](http://wiki.opscode.com/display/chef)
-* Opscode Chef [product page](http://www.opscode.com/chef)
-
-
-## Cookbook Contribution Do's and Don't's
-
-Please do include tests for your contribution. If you need help, ask
-on the
-[chef-dev mailing list](http://lists.opscode.com/sympa/info/chef-dev)
-or the
-[#chef-hacking IRC channel](http://community.opscode.com/chat/chef-hacking).
-Not all platforms that a cookbook supports may be supported by Test
-Kitchen. Please provide evidence of testing your contribution if it
-isn't trivial so we don't have to duplicate effort in testing. Chef
-10.14+ "doc" formatted output is sufficient.
-
-Please do indicate new platform (families) or platform versions in the
-commit message, and update the relevant ticket.
-
-If a contribution adds new platforms or platform versions, indicate
-such in the body of the commit message(s), and update the relevant
-COOK ticket. When writing commit messages, it is helpful for others if
-you indicate the COOK ticket. For example:
-
-    git commit -m '[COOK-1041] - Updated pool resource to correctly
-    delete.'
-
-Please do use [foodcritic](http://acrmp.github.com/foodcritic) to
-lint-check the cookbook. Except FC007, it should pass all correctness
-rules. FC007 is okay as long as the dependent cookbooks are *required*
-for the default behavior of the cookbook, such as to support an
-uncommon platform, secondary recipe, etc.
-
-Please do ensure that your changes do not break or modify behavior for
-other platforms supported by the cookbook. For example if your changes
-are for Debian, make sure that they do not break on CentOS.
-
-Please do not modify the version number in the metadata.rb, Opscode
-will select the appropriate version based on the release cycle
-information above.
-
-Please do not update the CHANGELOG.md for a new version. Not all
-changes to a cookbook may be merged and released in the same versions.
-Opscode will update the CHANGELOG.md when releasing a new version of
-the cookbook.
@@ -1,23 +0,0 @@
-# source "https://rubygems.org"
-
-# gem 'cucumber', '~> 1.2.0'
-# gem 'httparty', '~> 0.8.3'
-# gem 'minitest', '~> 3.0.0'
-# gem 'nokogiri', '~> 1.5.0'
-
-# group :kitchen  do
-#   gem 'test-kitchen', '< 1.0'
-# end
-
-
-source 'https://rubygems.org'
-
-gem 'berkshelf',  '~> 2.0'
-gem 'chefspec',   '~> 2.0'
-gem 'foodcritic', '~> 3.0'
-gem 'rubocop',    '~> 0.12'
-
-group :integration do
-  gem 'test-kitchen',    '~> 1.0.0.beta'
-  gem 'kitchen-vagrant', '~> 0.11'
-end
@@ -1,201 +0,0 @@
-                              Apache License
-                        Version 2.0, January 2004
-                     http://www.apache.org/licenses/
-
-TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-1. Definitions.
-
-   "License" shall mean the terms and conditions for use, reproduction,
-   and distribution as defined by Sections 1 through 9 of this document.
-
-   "Licensor" shall mean the copyright owner or entity authorized by
-   the copyright owner that is granting the License.
-
-   "Legal Entity" shall mean the union of the acting entity and all
-   other entities that control, are controlled by, or are under common
-   control with that entity. For the purposes of this definition,
-   "control" means (i) the power, direct or indirect, to cause the
-   direction or management of such entity, whether by contract or
-   otherwise, or (ii) ownership of fifty percent (50%) or more of the
-   outstanding shares, or (iii) beneficial ownership of such entity.
-
-   "You" (or "Your") shall mean an individual or Legal Entity
-   exercising permissions granted by this License.
-
-   "Source" form shall mean the preferred form for making modifications,
-   including but not limited to software source code, documentation
-   source, and configuration files.
-
-   "Object" form shall mean any form resulting from mechanical
-   transformation or translation of a Source form, including but
-   not limited to compiled object code, generated documentation,
-   and conversions to other media types.
-
-   "Work" shall mean the work of authorship, whether in Source or
-   Object form, made available under the License, as indicated by a
-   copyright notice that is included in or attached to the work
-   (an example is provided in the Appendix below).
-
-   "Derivative Works" shall mean any work, whether in Source or Object
-   form, that is based on (or derived from) the Work and for which the
-   editorial revisions, annotations, elaborations, or other modifications
-   represent, as a whole, an original work of authorship. For the purposes
-   of this License, Derivative Works shall not include works that remain
-   separable from, or merely link (or bind by name) to the interfaces of,
-   the Work and Derivative Works thereof.
-
-   "Contribution" shall mean any work of authorship, including
-   the original version of the Work and any modifications or additions
-   to that Work or Derivative Works thereof, that is intentionally
-   submitted to Licensor for inclusion in the Work by the copyright owner
-   or by an individual or Legal Entity authorized to submit on behalf of
-   the copyright owner. For the purposes of this definition, "submitted"
-   means any form of electronic, verbal, or written communication sent
-   to the Licensor or its representatives, including but not limited to
-   communication on electronic mailing lists, source code control systems,
-   and issue tracking systems that are managed by, or on behalf of, the
-   Licensor for the purpose of discussing and improving the Work, but
-   excluding communication that is conspicuously marked or otherwise
-   designated in writing by the copyright owner as "Not a Contribution."
-
-   "Contributor" shall mean Licensor and any individual or Legal Entity
-   on behalf of whom a Contribution has been received by Licensor and
-   subsequently incorporated within the Work.
-
-2. Grant of Copyright License. Subject to the terms and conditions of
-   this License, each Contributor hereby grants to You a perpetual,
-   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-   copyright license to reproduce, prepare Derivative Works of,
-   publicly display, publicly perform, sublicense, and distribute the
-   Work and such Derivative Works in Source or Object form.
-
-3. Grant of Patent License. Subject to the terms and conditions of
-   this License, each Contributor hereby grants to You a perpetual,
-   worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-   (except as stated in this section) patent license to make, have made,
-   use, offer to sell, sell, import, and otherwise transfer the Work,
-   where such license applies only to those patent claims licensable
-   by such Contributor that are necessarily infringed by their
-   Contribution(s) alone or by combination of their Contribution(s)
-   with the Work to which such Contribution(s) was submitted. If You
-   institute patent litigation against any entity (including a
-   cross-claim or counterclaim in a lawsuit) alleging that the Work
-   or a Contribution incorporated within the Work constitutes direct
-   or contributory patent infringement, then any patent licenses
-   granted to You under this License for that Work shall terminate
-   as of the date such litigation is filed.
-
-4. Redistribution. You may reproduce and distribute copies of the
-   Work or Derivative Works thereof in any medium, with or without
-   modifications, and in Source or Object form, provided that You
-   meet the following conditions:
-
-   (a) You must give any other recipients of the Work or
-       Derivative Works a copy of this License; and
-
-   (b) You must cause any modified files to carry prominent notices
-       stating that You changed the files; and
-
-   (c) You must retain, in the Source form of any Derivative Works
-       that You distribute, all copyright, patent, trademark, and
-       attribution notices from the Source form of the Work,
-       excluding those notices that do not pertain to any part of
-       the Derivative Works; and
-
-   (d) If the Work includes a "NOTICE" text file as part of its
-       distribution, then any Derivative Works that You distribute must
-       include a readable copy of the attribution notices contained
-       within such NOTICE file, excluding those notices that do not
-       pertain to any part of the Derivative Works, in at least one
-       of the following places: within a NOTICE text file distributed
-       as part of the Derivative Works; within the Source form or
-       documentation, if provided along with the Derivative Works; or,
-       within a display generated by the Derivative Works, if and
-       wherever such third-party notices normally appear. The contents
-       of the NOTICE file are for informational purposes only and
-       do not modify the License. You may add Your own attribution
-       notices within Derivative Works that You distribute, alongside
-       or as an addendum to the NOTICE text from the Work, provided
-       that such additional attribution notices cannot be construed
-       as modifying the License.
-
-   You may add Your own copyright statement to Your modifications and
-   may provide additional or different license terms and conditions
-   for use, reproduction, or distribution of Your modifications, or
-   for any such Derivative Works as a whole, provided Your use,
-   reproduction, and distribution of the Work otherwise complies with
-   the conditions stated in this License.
-
-5. Submission of Contributions. Unless You explicitly state otherwise,
-   any Contribution intentionally submitted for inclusion in the Work
-   by You to the Licensor shall be under the terms and conditions of
-   this License, without any additional terms or conditions.
-   Notwithstanding the above, nothing herein shall supersede or modify
-   the terms of any separate license agreement you may have executed
-   with Licensor regarding such Contributions.
-
-6. Trademarks. This License does not grant permission to use the trade
-   names, trademarks, service marks, or product names of the Licensor,
-   except as required for reasonable and customary use in describing the
-   origin of the Work and reproducing the content of the NOTICE file.
-
-7. Disclaimer of Warranty. Unless required by applicable law or
-   agreed to in writing, Licensor provides the Work (and each
-   Contributor provides its Contributions) on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-   implied, including, without limitation, any warranties or conditions
-   of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-   PARTICULAR PURPOSE. You are solely responsible for determining the
-   appropriateness of using or redistributing the Work and assume any
-   risks associated with Your exercise of permissions under this License.
-
-8. Limitation of Liability. In no event and under no legal theory,
-   whether in tort (including negligence), contract, or otherwise,
-   unless required by applicable law (such as deliberate and grossly
-   negligent acts) or agreed to in writing, shall any Contributor be
-   liable to You for damages, including any direct, indirect, special,
-   incidental, or consequential damages of any character arising as a
-   result of this License or out of the use or inability to use the
-   Work (including but not limited to damages for loss of goodwill,
-   work stoppage, computer failure or malfunction, or any and all
-   other commercial damages or losses), even if such Contributor
-   has been advised of the possibility of such damages.
-
-9. Accepting Warranty or Additional Liability. While redistributing
-   the Work or Derivative Works thereof, You may choose to offer,
-   and charge a fee for, acceptance of support, warranty, indemnity,
-   or other liability obligations and/or rights consistent with this
-   License. However, in accepting such obligations, You may act only
-   on Your own behalf and on Your sole responsibility, not on behalf
-   of any other Contributor, and only if You agree to indemnify,
-   defend, and hold each Contributor harmless for any liability
-   incurred by, or claims asserted against, such Contributor by reason
-   of your accepting any such warranty or additional liability.
-
-END OF TERMS AND CONDITIONS
-
-APPENDIX: How to apply the Apache License to your work.
-
-   To apply the Apache License to your work, attach the following
-   boilerplate notice, with the fields enclosed by brackets "[]"
-   replaced with your own identifying information. (Don't include
-   the brackets!)  The text should be enclosed in the appropriate
-   comment syntax for the file format. We also recommend that a
-   file or class name and description of purpose be included on the
-   same "printed page" as the copyright notice for easier
-   identification within third-party archives.
-
-Copyright [yyyy] [name of copyright owner]
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
@@ -1,586 +0,0 @@
-apache2 Cookbook
-================
-[![Build Status](https://secure.travis-ci.org/opscode-cookbooks/apache2.png?branch=master)](http://travis-ci.org/opscode-cookbooks/apache2)
-
-
-This cookbook provides a complete Debian/Ubuntu style Apache HTTPD
-configuration. Non-Debian based distributions such as Red Hat/CentOS,
-ArchLinux and others supported by this cookbook will have a
-configuration that mimics Debian/Ubuntu style as it is easier to
-manage with Chef.
-
-Debian-style Apache configuration uses scripts to manage modules and
-sites (vhosts). The scripts are:
-
-* a2ensite
-* a2dissite
-* a2enmod
-* a2dismod
-
-This cookbook ships with templates of these scripts for non
-Debian/Ubuntu platforms. The scripts are used in the __Definitions__
-below.
-
-Requirements
-============
-
-## Ohai and Chef:
-
-* Ohai: 0.6.12+
-* Chef: 0.10.10+
-
-As of v1.2.0, this cookbook makes use of `node['platform_family']` to
-simplify platform selection logic. This attribute was introduced in
-Ohai v0.6.12. The recipe methods were introduced in Chef v0.10.10. If
-you must run an older version of Chef or Ohai, use [version 1.1.16 of
-this cookbook](http://community.opscode.com/cookbooks/apache2/versions/1_1_16/downloads).
-
-## Cookbooks:
-
-This cookbook doesn't have direct dependencies on other cookbooks, as
-none are needed for the default recipe or the general use cases.
-
-Depending on your OS configuration and security policy, you may need
-additional recipes or cookbooks for this cookbook's recipes to
-converge on the node. In particular, the following Operating System
-settings may affect the behavior of this cookbook:
-
-* apt cache outdated
-* SELinux enabled
-* IPtables
-* Compile tools
-* 3rd party repositories
-
-On Ubuntu/Debian, use Opscode's `apt` cookbook to ensure the package
-cache is updated so Chef can install packages, or consider putting
-apt-get in your bootstrap process or
-[knife bootstrap template](http://wiki.opscode.com/display/chef/Knife+Bootstrap).
-
-On RHEL, SELinux is enabled by default. The `selinux` cookbook
-contains a `permissive` recipe that can be used to set SELinux to
-"Permissive" state. Otherwise, additional recipes need to be created
-by the user to address SELinux permissions.
-
-The easiest but **certainly not ideal way** to deal with IPtables is
-to flush all rules. Opscode does provide an `iptables` cookbook but is
-migrating from the approach used there to a more robust solution
-utilizing a general "firewall" LWRP that would have an "iptables"
-provider. Alternately, you can use ufw, with Opscode's `ufw` and
-`firewall` cookbooks to set up rules. See those cookbooks' READMEs for
-documentation.
-
-Build/compile tools may not be installed on the system by default.
-Some recipes (e.g., `apache2::mod_auth_openid`) build the module from
-source. Use Opscode's `build-essential` cookbook to get essential
-build packages installed.
-
-On ArchLinux, if you are using the `apache2::mod_auth_openid` recipe,
-you also need the `pacman` cookbook for the `pacman_aur` LWRP. Put
-`recipe[pacman]` on the node's expanded run list (on the node or in a
-role). This is not an explicit dependency because it is only required
-for this single recipe and platform; the pacman default recipe
-performs `pacman -Sy` to keep pacman's package cache updated.
-
-The `apache2::god_monitor` recipe uses a definition from the `god`
-cookbook. Include `recipe[god]` in the node's expanded run list to
-ensure that the cookbook is available to the node, and to set up `god`.
-
-## Platforms:
-
-The following platforms and versions are tested and supported using
-Opscode's [test-kitchen](http://github.com/opscode/test-kitchen).
-
-* Ubuntu 10.04, 12.04
-* CentOS 5.8, 6.3
-
-The following platform families are supported in the code, and are
-assumed to work based on the successful testing on Ubuntu and CentOS.
-
-* Debian
-* Red Hat (rhel)
-* Fedora
-* Amazon Linux
-
-The following platforms are also supported in the code, have been
-tested manually but are not tested under test-kitchen.
-
-* SUSE/OpenSUSE
-* ArchLinux
-* FreeBSD
-
-### Notes for RHEL Family:
-
-On Red Hat Enterprise Linux and derivatives, the EPEL repository may
-be necessary to install packages used in certain recipes. The
-`apache2::default` recipe, however, does not require any additional
-repositories. Opscode's `yum` cookbook contains a recipe to add the
-EPEL repository. See __Examples__ for more information.
-
-### Notes for FreeBSD:
-
-The `apache2::mod_php5` recipe depends on the `freebsd` cookbook,
-which it uses to set the correct options for compiling the `php5` port
-from sources. You need to ensure the `freebsd` is in the expanded run
-list, or this recipe will fail. We don't set an explicit dependency
-because we feel the `freebsd` cookbook is something users would want
-on their nodes, and due to the generality of this cookbook we don't
-want additional specific dependencies.
-
-Tests
-=====
-
-This cookbook in the
-[source repository](https://github.com/opscode-cookbooks/apache2)
-contains minitest and cucumber tests. This is an initial proof of
-concept that will be fleshed out with more supporting infrastructure
-at a future time.
-
-Please see the CONTRIBUTING file for information on how to add tests
-for your contributions.
-
-Attributes
-==========
-
-This cookbook uses many attributes, broken up into a few different
-kinds.
-
-Platform specific
-----------------
-
-In order to support the broadest number of platforms, several
-attributes are determined based on the node's platform. See the
-attributes/default.rb file for default values in the case statement at
-the top of the file.
-
-* `node['apache']['dir']` - Location for the Apache configuration
-* `node['apache']['log_dir']` - Location for Apache logs
-* `node['apache']['error_log']` - Location for the default error log
-* `node['apache']['access_log']` - Location for the default access log
-* `node['apache']['user']` - User Apache runs as
-* `node['apache']['group']` - Group Apache runs as
-* `node['apache']['binary']` - Apache httpd server daemon
-* `node['apache']['icondir']` - Location for icons
-* `node['apache']['cache_dir']` - Location for cached files used by Apache itself or recipes
-* `node['apache']['pid_file']` - Location of the PID file for Apache httpd
-* `node['apache']['lib_dir']` - Location for shared libraries
-* `node['apache']['default_site_enabled']` - Default site enabled. Default is false.
-* `node['apache']['ext_status']` - if true, enables ExtendedStatus for `mod_status`
-
-General settings
----------------
-
-These are general settings used in recipes and templates. Default
-values are noted.
-
-* `node['apache']['listen_addresses']` - Addresses that httpd should listen on. Default is any ("*").
-* `node['apache']['listen_ports']` - Ports that httpd should listen on. Default is port 80.
-* `node['apache']['contact']` - Value for ServerAdmin directive. Default "ops@example.com".
-* `node['apache']['timeout']` - Value for the Timeout directive. Default is 300.
-* `node['apache']['keepalive']` - Value for the KeepAlive directive. Default is On.
-* `node['apache']['keepaliverequests']` - Value for MaxKeepAliveRequests. Default is 100.
-* `node['apache']['keepalivetimeout']` - Value for the KeepAliveTimeout directive. Default is 5.
-* `node['apache']['default_modules']` - Array of module names. Can take "mod_FOO" or "FOO" as names, where FOO is the apache module, e.g. "`mod_status`" or "`status`".
-
-The modules listed in `default_modules` will be included as recipes in `recipe[apache::default]`.
-
-Prefork attributes
------------------
-
-Prefork attributes are used for tuning the Apache HTTPD prefork MPM
-configuration.
-
-* `node['apache']['prefork']['startservers']` - initial number of server processes to start. Default is 16.
-* `node['apache']['prefork']['minspareservers']` - minimum number of spare server processes. Default 16.
-* `node['apache']['prefork']['maxspareservers']` - maximum number of spare server processes. Default 32.
-* `node['apache']['prefork']['serverlimit']` - upper limit on configurable server processes. Default 400.
-* `node['apache']['prefork']['maxclients']` - Maximum number of simultaneous connections.
-* `node['apache']['prefork']['maxrequestsperchild']` - Maximum number of request a child process will handle. Default 10000.
-
-Worker attributes
-----------------
-
-Worker attributes are used for tuning the Apache HTTPD worker MPM
-configuration.
-
-* `node['apache']['worker']['startservers']` - Initial number of server processes to start. Default 4
-* `node['apache']['worker']['serverlimit']` - upper limit on configurable server processes. Default 16.
-* `node['apache']['worker']['maxclients']` - Maximum number of simultaneous connections. Default 1024.
-* `node['apache']['worker']['minsparethreads']` - Minimum number of spare worker threads. Default 64
-* `node['apache']['worker']['maxsparethreads']` - Maximum number of spare worker threads. Default 192.
-* `node['apache']['worker']['maxrequestsperchild']` - Maximum number of requests a child process will handle.
-
-mod\_auth\_openid attributes
----------------------------
-
-The following attributes are in the `attributes/mod_auth_openid.rb`
-file. Like all Chef attributes files, they are loaded as well, but
-they're logistically unrelated to the others, being specific to the
-`mod_auth_openid` recipe.
-
-* `node['apache']['mod_auth_openid']['checksum']` - sha256sum of the tarball containing the source.
-* `node['apache']['mod_auth_openid']['ref']` - Any sha, tag, or branch found from https://github.com/bmuller/mod_auth_openid
-* `node['apache']['mod_auth_openid']['cache_dir']` - the cache directory is where the sqlite3 database is stored. It is separate so it can be managed as a directory resource.
-* `node['apache']['mod_auth_openid']['dblocation']` - filename of the sqlite3 database used for directive `AuthOpenIDDBLocation`, stored in the `cache_dir` by default.
-* `node['apache']['mod_auth_openid']['configure_flags']` - optional array of configure flags passed to the `./configure` step in the compilation of the module.
-
-mod\_ssl attributes
-------------------
-
-* `node['apache']['mod_ssl']['cipher_suite']` - sets the
-  SSLCiphersuite value to the specified string. The default is
-  considered "sane" but you may need to change it for your local
-  security policy, e.g. if you have PCI-DSS requirements. Additional
-  commentary on the
-  [original pull request](https://github.com/opscode-cookbooks/apache2/pull/15#commitcomment-1605406).
-
-Recipes
-=======
-
-Most of the recipes in the cookbook are for enabling Apache modules.
-Where additional configuration or behavior is used, it is documented
-below in more detail.
-
-The following recipes merely enable the specified module: `mod_alias`,
-`mod_basic`, `mod_digest`, `mod_authn_file`, `mod_authnz_ldap`,
-`mod_authz_default`, `mod_authz_groupfile`, `mod_authz_host`,
-`mod_authz_user`, `mod_autoindex`, `mod_cgi`, `mod_dav_fs`,
-`mod_dav_svn`, `mod_deflate`, `mod_dir`, `mod_env`, `mod_expires`,
-`mod_headers`, `mod_ldap`, `mod_log_config`, `mod_mime`,
-`mod_negotiation`, `mod_proxy`, `mod_proxy_ajp`, `mod_proxy_balancer`,
-`mod_proxy_connect`, `mod_proxy_http`, `mod_python`, `mod_rewrite`,
-`mod_setenvif`, `mod_status`, `mod_wsgi`, `mod_xsendfile`.
-
-On RHEL Family distributions, certain modules ship with a config file
-with the package. The recipes here may delete those configuration
-files to ensure they don't conflict with the settings from the
-cookbook, which will use per-module configuration in
-`/etc/httpd/mods-enabled`.
-
-default
-------
-
-The default recipe does a number of things to set up Apache HTTPd. It
-also includes a number of modules based on the attribute
-`node['apache']['default_modules']` as recipes.
-
-logrotate
---------
-
-Logrotate adds a logrotate entry for your apache2 logs. This recipe
-requires the `logrotate` cookbook; ensure that `recipe[logrotate]` is
-in the node's expanded run list.
-
-mod\_auth\_cas
--------------
-
-This recipe installs the proper package and enables the `auth_cas`
-module. It can install from source or package. Package is the default,
-set the attribute `node['apache']['mod_auth_cas']['from_source']` to
-true to enable source installation. Modify the version to install by
-changing the attribute
-`node['apache']['mod_auth_cas']['source_revision']`. It is a version
-tag by default, but could be master, or another tag, or branch.
-
-The module configuration is written out with the `CASCookiePath` set,
-otherwise an error loading the module may cause Apache to not start.
-
-**Note**: This recipe does not work on EL 6 platforms unless
-epel-testing repository is enabled (outside the scope of this
-cookbook), or the package version 1.0.8.1-3.el6 or higher is otherwise
-available to the system due to this bug:
-
-https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=708550
-
-mod\_auth\_openid
-----------------
-
-**Changed via COOK-915**
-
-This recipe compiles the module from source. In addition to
-`build-essential`, some other packages are included for installation
-like the GNU C++ compiler and development headers.
-
-To use the module in your own cookbooks to authenticate systems using
-OpenIDs, specify an array of OpenIDs that are allowed to authenticate
-with the attribute `node['apache']['allowed_openids']`. Use the
-following in a vhost to protect with OpenID authentication:
-
-    AuthType OpenID require user <%= node['apache']['allowed_openids'].join(' ') %>
-    AuthOpenIDDBLocation <%= node['apache']['mod_auth_openid']['dblocation'] %>
-
-Change the DBLocation with the attribute as required; this file is in
-a different location than previous versions, see below. It should be a
-sane default for most platforms, though, see
-`attributes/mod_auth_openid.rb`.
-
-### Changes from COOK-915:
-
-* `AuthType OpenID` instead of `AuthOpenIDEnabled On`.
-* `require user` instead of `AuthOpenIDUserProgram`.
-* A bug(?) in `mod_auth_openid` causes it to segfault when attempting
-  to update the database file if the containing directory is not
-  writable by the HTTPD process owner (e.g., www-data), even if the
-  file is writable. In order to not interfere with other settings from
-  the default recipe in this cookbook, the db file is moved.
-
-mod\_fastcgi
------------
-
-Install the fastcgi package and enable the module.
-
-Only work on Debian/Ubuntu
-
-mod\_fcgid
----------
-
-Installs the fcgi package and enables the module. Requires EPEL on
-RHEL family.
-
-On RHEL family, this recipe will delete the fcgid.conf and on version
-6+, create the /var/run/httpd/mod_fcgid` directory, which prevents the
-emergency error:
-
-    [emerg] (2)No such file or directory: mod_fcgid: Can't create shared memory for size XX bytes
-
-mod\_php5
--------
-
-Simply installs the appropriate package on Debian, Ubuntu and
-ArchLinux.
-
-On Red Hat family distributions including Fedora, the php.conf that
-comes with the package is removed. On RHEL platforms less than v6, the
-`php53` package is used.
-
-mod\_ssl
--------
-
-Besides installing and enabling `mod_ssl`, this recipe will append
-port 443 to the `node['apache']['listen_ports']` attribute array and
-update the ports.conf.
-
-god\_monitor
------------
-
-Sets up a `god` monitor for Apache. External requirements are the
-`god` and `runit` cookbooks from Opscode. When using this recipe,
-include `recipe[god]` in the node's expanded run list to ensure the
-client downloads it; `god` depends on runit so that will also be
-downloaded.
-
-**Note** This recipe is not tested under test-kitchen yet and is
-  pending fix in COOK-744.
-
-Definitions
-===========
-
-The cookbook provides a few definitions. At some point in the future
-these definitions may be refactored into lightweight resources and
-providers as suggested by
-[foodcritic rule FC015](http://acrmp.github.com/foodcritic/#FC015).
-
-apache\_conf
------------
-
-Sets up configuration file for an Apache module from a template. The
-template should be in the same cookbook where the definition is used.
-This is used by the `apache_module` definition and is not often used
-directly.
-
-This will use a template resource to write the module's configuration
-file in the `mods-available` under the Apache configuration directory
-(`node['apache']['dir']`). This is a platform-dependent location. See
-__apache\_module__.
-
-### Parameters:
-
-* `name` - Name of the template. When used from the `apache_module`,
-  it will use the same name as the module.
-
-### Examples:
-
-Create `#{node['apache']['dir']}/mods-available/alias.conf`.
-
-    apache_conf "alias"
-
-apache\_module
--------------
-
-Enable or disable an Apache module in
-`#{node['apache']['dir']}/mods-available` by calling `a2enmod` or
-`a2dismod` to manage the symbolic link in
-`#{node['apache']['dir']}/mods-enabled`. If the module has a
-configuration file, a template should be created in the cookbook where
-the definition is used. See __Examples__.
-
-### Parameters:
-
-* `name` - Name of the module enabled or disabled with the `a2enmod` or `a2dismod` scripts.
-* `enable` - Default true, which uses `a2enmod` to enable the module. If false, the module will be disabled with `a2dismod`.
-* `conf` - Default false. Set to true if the module has a config file, which will use `apache_conf` for the file.
-* `filename` - specify the full name of the file, e.g.
-
-### Examples:
-
-Enable the ssl module, which also has a configuration template in `templates/default/mods/ssl.conf.erb`.
-
-    apache_module "ssl" do
-      conf true
-    end
-
-Enable the php5 module, which has a different filename than the module default:
-
-    apache_module "php5" do
-      filename "libphp5.so"
-    end
-
-Disable a module:
-
-    apache_module "disabled_module" do
-      enable false
-    end
-
-See the recipes directory for many more examples of `apache_module`.
-
-apache\_site
------------
-
-Enable or disable a VirtualHost in
-`#{node['apache']['dir']}/sites-available` by calling a2ensite or
-a2dissite to manage the symbolic link in
-`#{node['apache']['dir']}/sites-enabled`.
-
-The template for the site must be managed as a separate resource. To
-combine the template with enabling a site, see `web_app`.
-
-### Parameters:
-
-* `name` - Name of the site.
-* `enable` - Default true, which uses `a2ensite` to enable the site. If false, the site will be disabled with `a2dissite`.
-
-web\_app
--------
-
-Manage a template resource for a VirtualHost site, and enable it with
-`apache_site`. This is commonly done for managing web applications
-such as Ruby on Rails, PHP or Django, and the default behavior
-reflects that. However it is flexible.
-
-This definition includes some recipes to make sure the system is
-configured to have Apache and some sane default modules:
-
-* `apache2`
-* `apache2::mod_rewrite`
-* `apache2::mod_deflate`
-* `apache2::mod_headers`
-
-It will then configure the template (see __Parameters__ and
-__Examples__ below), and enable or disable the site per the `enable`
-parameter.
-
-### Parameters:
-
-Current parameters used by the definition:
-
-* `name` - The name of the site. The template will be written to
-  `#{node['apache']['dir']}/sites-available/#{params['name']}.conf`
-* `cookbook` - Optional. Cookbook where the source template is. If
-  this is not defined, Chef will use the named template in the
-  cookbook where the definition is used.
-* `template` - Default `web_app.conf.erb`, source template file.
-* `enable` - Default true. Passed to the `apache_site` definition.
-
-Additional parameters can be defined when the definition is called in
-a recipe, see __Examples__.
-
-### Examples:
-
-All parameters are passed into the template. You can use whatever you
-like. The apache2 cookbook comes with a `web_app.conf.erb` template as
-an example. The following parameters are used in the template:
-
-* `server_name` - ServerName directive.
-* `server_aliases` - ServerAlias directive. Must be an array of aliases.
-* `docroot` - DocumentRoot directive.
-* `application_name` - Used in RewriteLog directive. Will be set to the `name` parameter.
-* `directory_index` - Allow overriding the default DirectoryIndex setting, optional
-* `directory_options` - Override Options on the docroot, for example to add parameters like Includes or Indexes, optional.
-* `allow_override` - Modify the AllowOverride directive on the docroot to support apps that need .htaccess to modify configuration or require authentication.
-
-To use the default web_app, for example:
-
-    web_app "my_site" do
-      server_name node['hostname']
-      server_aliases [node['fqdn'], "my-site.example.com"]
-      docroot "/srv/www/my_site"
-    end
-
-The parameters specified will be used as:
-
-* `@params[:server_name]`
-* `@params[:server_aliases]`
-* `@params[:docroot]`
-
-In the template. When you write your own, the `@` is significant.
-
-For more information about Definitions and parameters, see the
-[Chef Wiki](http://wiki.opscode.com/display/chef/Definitions)
-
-Usage
-=====
-
-Using this cookbook is relatively straightforward. Add the desired
-recipes to the run list of a node, or create a role. Depending on your
-environment, you may have multiple roles that use different recipes
-from this cookbook. Adjust any attributes as desired. For example, to
-create a basic role for web servers that provide both HTTP and HTTPS:
-
-    % cat roles/webserver.rb
-    name "webserver"
-    description "Systems that serve HTTP and HTTPS"
-    run_list(
-      "recipe[apache2]",
-      "recipe[apache2::mod_ssl]"
-    )
-    default_attributes(
-      "apache" => {
-        "listen_ports" => ["80", "443"]
-      }
-    )
-
-For examples of using the definitions in your own recipes, see their
-respective sections above.
-
-License and Authors
-===================
-
-* Author:: Adam Jacob <adam@opscode.com>
-* Author:: Joshua Timberman <joshua@opscode.com>
-* Author:: Bryan McLellan <bryanm@widemile.com>
-* Author:: Dave Esposito <esposito@espolinux.corpnet.local>
-* Author:: David Abdemoulaie <github@hobodave.com>
-* Author:: Edmund Haselwanter <edmund@haselwanter.com>
-* Author:: Eric Rochester <err8n@virginia.edu>
-* Author:: Jim Browne <jbrowne@42lines.net>
-* Author:: Matthew Kent <mkent@magoazul.com>
-* Author:: Nathen Harvey <nharvey@customink.com>
-* Author:: Ringo De Smet <ringo.de.smet@amplidata.com>
-* Author:: Sean OMeara <someara@opscode.com>
-* Author:: Seth Chisamore <schisamo@opscode.com>
-* Author:: Gilles Devaux <gilles@peerpong.com>
-
-* Copyright:: 2009-2012, Opscode, Inc
-* Copyright:: 2011, Atriso
-* Copyright:: 2011, CustomInk, LLC.
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
@@ -1,53 +0,0 @@
-This cookbook uses a variety of testing components:
-
- Unit tests: [ChefSpec](https://github.com/acrmp/chefspec)
- Integration tests: [Test Kitchen](https://github.com/opscode/test-kitchen)
- Chef Style lints: [Foodcritic](https://github.com/acrmp/foodcritic)
- Ruby Style lints: [Rubocop](https://github.com/bbatsov/rubocop)
-
-
-Prerequisites
-------------
-To develop on this cookbook, you must have a sane Ruby 1.9+ environment. Given the nature of this installation process (and it's variance across multiple operating systems), we will leave this installation process to the user.
-
-You must also have `bundler` installed:
-
-    $ gem install bundler
-
-You must also have Vagrant and VirtualBox installed:
-
- [Vagrant](https://vagrantup.com)
- [VirtualBox](https://virtualbox.org)
-
-Once installed, you must install the `vagrant-berkshelf` plugin:
-
-    $ vagrant plugin install vagrant-berkshelf
-
-
-Development
-----------
-1. Clone the git repository from GitHub:
-
-        $ git clone git@github.com:opscode-cookbooks/COOKBOOK.git
-
-2. Install the dependencies using bundler:
-
-        $ bundle install
-
-3. Create a branch for your changes:
-
-        $ git checkout -b my_bug_fix
-
-4. Make any changes
-5. Write tests to support those changes. It is highly recommended you write both unit and integration tests.
-6. Run the tests:
-    - `bundle exec rspec`
-    - `bundle exec foodcritic .`
-    - `bundle exec rubocop`
-    - `bundle exec kitchen test`
-
-7. Assuming the tests pass, open a Pull Request on GitHub
-8. Open a JIRA ticket for this compontent, linking the JIRA ticket to the Pull Request and visa versa.
-9. Mark the JIRA ticket as "Fix Provided"
-
-For more information, see [Opscode's Contribution Guidelines](https://wiki.opscode.com/display/chef/How+to+Contribute).
@@ -1,177 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Attributes:: apache
-#
-# Copyright 2008-2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-default['apache']['root_group'] = 'root'
-
-# Where the various parts of apache are
-case node['platform']
-when 'redhat', 'centos', 'scientific', 'fedora', 'suse', 'amazon', 'oracle'
-  default['apache']['package']     = 'httpd'
-  default['apache']['dir']         = '/etc/httpd'
-  default['apache']['log_dir']     = '/var/log/httpd'
-  default['apache']['error_log']   = 'error.log'
-  default['apache']['access_log']  = 'access.log'
-  default['apache']['user']        = 'apache'
-  default['apache']['group']       = 'apache'
-  default['apache']['binary']      = '/usr/sbin/httpd'
-  default['apache']['docroot_dir'] = '/var/www/html'
-  default['apache']['cgibin_dir']  = '/var/www/cgi-bin'
-  default['apache']['icondir']     = '/var/www/icons'
-  default['apache']['cache_dir']   = '/var/cache/httpd'
-  default['apache']['pid_file']    = if node['platform_version'].to_f >= 6
-                                       '/var/run/httpd/httpd.pid'
-                                     else
-                                       '/var/run/httpd.pid'
-                                     end
-  default['apache']['lib_dir']     = node['kernel']['machine'] =~ /^i[36]86$/ ? '/usr/lib/httpd' : '/usr/lib64/httpd'
-  default['apache']['libexecdir']  = "#{node['apache']['lib_dir']}/modules"
-  default['apache']['default_site_enabled'] = false
-when 'debian', 'ubuntu'
-  default['apache']['package']     = 'apache2'
-  default['apache']['dir']         = '/etc/apache2'
-  default['apache']['log_dir']     = '/var/log/apache2'
-  default['apache']['error_log']   = 'error.log'
-  default['apache']['access_log']  = 'access.log'
-  default['apache']['user']        = 'www-data'
-  default['apache']['group']       = 'www-data'
-  default['apache']['binary']      = '/usr/sbin/apache2'
-  default['apache']['docroot_dir'] = '/var/www'
-  default['apache']['cgibin_dir']  = '/usr/lib/cgi-bin'
-  default['apache']['icondir']     = '/usr/share/apache2/icons'
-  default['apache']['cache_dir']   = '/var/cache/apache2'
-  default['apache']['pid_file']    = '/var/run/apache2.pid'
-  default['apache']['lib_dir']     = '/usr/lib/apache2'
-  default['apache']['libexecdir']  = "#{node['apache']['lib_dir']}/modules"
-  default['apache']['default_site_enabled'] = false
-when 'arch'
-  default['apache']['package']     = 'apache'
-  default['apache']['dir']         = '/etc/httpd'
-  default['apache']['log_dir']     = '/var/log/httpd'
-  default['apache']['error_log']   = 'error.log'
-  default['apache']['access_log']  = 'access.log'
-  default['apache']['user']        = 'http'
-  default['apache']['group']       = 'http'
-  default['apache']['binary']      = '/usr/sbin/httpd'
-  default['apache']['docroot_dir'] = '/srv/http'
-  default['apache']['cgibin_dir']  = '/usr/share/httpd/cgi-bin'
-  default['apache']['icondir']     = '/usr/share/httpd/icons'
-  default['apache']['cache_dir']   = '/var/cache/httpd'
-  default['apache']['pid_file']    = '/var/run/httpd/httpd.pid'
-  default['apache']['lib_dir']     = '/usr/lib/httpd'
-  default['apache']['libexecdir']  = "#{node['apache']['lib_dir']}/modules"
-  default['apache']['default_site_enabled'] = false
-when 'freebsd'
-  default['apache']['package']     = 'apache22'
-  default['apache']['dir']         = '/usr/local/etc/apache22'
-  default['apache']['log_dir']     = '/var/log'
-  default['apache']['error_log']   = 'httpd-error.log'
-  default['apache']['access_log']  = 'httpd-access.log'
-  default['apache']['root_group']  = 'wheel'
-  default['apache']['user']        = 'www'
-  default['apache']['group']       = 'www'
-  default['apache']['binary']      = '/usr/local/sbin/httpd'
-  default['apache']['docroot_dir'] = '/usr/local/www/apache22/data'
-  default['apache']['cgibin_dir']  = '/usr/local/www/apache22/cgi-bin'
-  default['apache']['icondir']     = '/usr/local/www/apache22/icons'
-  default['apache']['cache_dir']   = '/var/run/apache22'
-  default['apache']['pid_file']    = '/var/run/httpd.pid'
-  default['apache']['lib_dir']     = '/usr/local/libexec/apache22'
-  default['apache']['libexecdir']  = node['apache']['lib_dir']
-  default['apache']['default_site_enabled'] = false
-else
-  default['apache']['dir']         = '/etc/apache2'
-  default['apache']['log_dir']     = '/var/log/apache2'
-  default['apache']['error_log']   = 'error.log'
-  default['apache']['access_log']  = 'access.log'
-  default['apache']['user']        = 'www-data'
-  default['apache']['group']       = 'www-data'
-  default['apache']['binary']      = '/usr/sbin/apache2'
-  default['apache']['docroot_dir'] = '/var/www'
-  default['apache']['cgibin_dir']  = '/usr/lib/cgi-bin'
-  default['apache']['icondir']     = '/usr/share/apache2/icons'
-  default['apache']['cache_dir']   = '/var/cache/apache2'
-  default['apache']['pid_file']    = 'logs/httpd.pid'
-  default['apache']['lib_dir']     = '/usr/lib/apache2'
-  default['apache']['libexecdir']  = "#{node['apache']['lib_dir']}/modules"
-  default['apache']['default_site_enabled'] = false
-end
-
-###
-# These settings need the unless, since we want them to be tunable,
-# and we don't want to override the tunings.
-###
-
-# General settings
-default['apache']['listen_addresses']  = %w[*]
-default['apache']['listen_ports']      = %w[80]
-default['apache']['contact']           = 'ops@example.com'
-default['apache']['timeout']           = 300
-default['apache']['keepalive']         = 'On'
-default['apache']['keepaliverequests'] = 100
-default['apache']['keepalivetimeout']  = 5
-
-# Security
-default['apache']['servertokens']    = 'Prod'
-default['apache']['serversignature'] = 'On'
-default['apache']['traceenable']     = 'On'
-
-# mod_auth_openids
-default['apache']['allowed_openids'] = []
-
-# mod_status Allow list, space seprated list of allowed entries.
-default['apache']['status_allow_list'] = 'localhost ip6-localhost'
-
-# mod_status ExtendedStatus, set to 'true' to enable
-default['apache']['ext_status'] = false
-
-# mod_info Allow list, space seprated list of allowed entries.
-default['apache']['info_allow_list'] = 'localhost ip6-localhost'
-
-# Prefork Attributes
-default['apache']['prefork']['startservers']        = 16
-default['apache']['prefork']['minspareservers']     = 16
-default['apache']['prefork']['maxspareservers']     = 32
-default['apache']['prefork']['serverlimit']         = 400
-default['apache']['prefork']['maxclients']          = 400
-default['apache']['prefork']['maxrequestsperchild'] = 10_000
-
-# Worker Attributes
-default['apache']['worker']['startservers']        = 4
-default['apache']['worker']['serverlimit']         = 16
-default['apache']['worker']['maxclients']          = 1024
-default['apache']['worker']['minsparethreads']     = 64
-default['apache']['worker']['maxsparethreads']     = 192
-default['apache']['worker']['threadsperchild']     = 64
-default['apache']['worker']['maxrequestsperchild'] = 0
-
-# mod_proxy settings
-default['apache']['proxy']['order']      = 'deny,allow'
-default['apache']['proxy']['deny_from']  = 'all'
-default['apache']['proxy']['allow_from'] = 'none'
-
-# Default modules to enable via include_recipe
-
-default['apache']['default_modules'] = %w[
-  status alias auth_basic authn_file authz_default authz_groupfile authz_host authz_user autoindex
-  dir env mime negotiation setenvif
-]
-
-%w[log_config logio].each do |log_mod|
-  default['apache']['default_modules'] << log_mod if %w[rhel fedora suse arch freebsd].include?(node['platform_family'])
-end
@@ -1,21 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Attributes:: mod_auth_cas
-#
-# Copyright 2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-default['apache']['mod_auth_cas']['from_source']     = false
-default['apache']['mod_auth_cas']['source_revision'] = 'v1.0.8.1'
@@ -1,33 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Attributes:: mod_auth_cas
-#
-# Copyright 2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-default['apache']['mod_auth_openid']['ref']        = '95043901eab868400937642d9bc55d17e9dd069f'
-default['apache']['mod_auth_openid']['source_url'] = "https://github.com/bmuller/mod_auth_openid/archive/#{node['apache']['mod_auth_openid']['ref']}.tar.gz"
-default['apache']['mod_auth_openid']['cache_dir']  = '/var/cache/mod_auth_openid'
-default['apache']['mod_auth_openid']['dblocation'] = "#{node['apache']['mod_auth_openid']['cache_dir']}/mod_auth_openid.db"
-
-case node['platform_family']
-when 'freebsd'
-  default['apache']['mod_auth_openid']['configure_flags'] = [
-    'CPPFLAGS=-I/usr/local/include',
-    'LDFLAGS=-I/usr/local/lib -lsqlite3'
-  ]
-else
-  default['apache']['mod_auth_openid']['configure_flags'] = []
-end
@@ -1,20 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Attributes:: mod_fastcgi
-#
-# Copyright 2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-default['apache']['mod_fastcgi']['download_url'] = 'http://www.fastcgi.com/dist/mod_fastcgi-current.tar.gz'
@@ -1,20 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Attributes:: mod_ssl
-#
-# Copyright 2012-2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-default['apache']['mod_ssl']['cipher_suite'] = 'RC4-SHA:HIGH:!ADH'
@@ -1,26 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Definition:: apache_conf
-#
-# Copyright 2008-20013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-define :apache_conf do
-  template "#{node['apache']['dir']}/mods-available/#{params[:name]}.conf" do
-    source   "mods/#{params[:name]}.conf.erb"
-    mode     '0644'
-    notifies :restart, 'service[apache2]'
-  end
-end
@@ -1,51 +0,0 @@
-#
-# Cookbook Name:: apache2
-# Definition:: apache_module
-#
-# Copyright 2008-2013, Opscode, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-define :apache_module, :enable => true, :conf => false do
-  include_recipe 'apache2::default'
-
-  params[:filename]    = params[:filename] || "mod_#{params[:name]}.so"
-  params[:module_path] = params[:module_path] || "#{node['apache']['libexecdir']}/#{params[:filename]}"
-
-  apache_conf params[:name] if params[:conf]
-
-  if platform_family?('rhel', 'fedora', 'arch', 'suse', 'freebsd')
-    file "#{node['apache']['dir']}/mods-available/#{params[:name]}.load" do
-      content "LoadModule #{params[:name]}_module #{params[:module_path]}\n"
-      mode    '0644'
-    end
-  end
-
-  if params[:enable]
-    execute "a2enmod #{params[:name]}" do
-      command "/usr/sbin/a2enmod #{params[:name]}"
-      notifies :restart, 'service[apache2]'
-      not_if do
-        ::File.symlink?("#{node['apache']['dir']}/mods-enabled/#{params[:name]}.load") &&
-        (::File.exists?("#{node['apache']['dir']}/mods-available/#{params[:name]}.conf") ? ::File.symlink?("#{node['apache']['dir']}/mods-enabled/#{params[:name]}.conf") : true)
-      end
-    end
-  else
-    execute "a2dismod #{params[:name]}" do
-      command "/usr/sbin/a2dismod #{params[:name]}"
-      notifies :restart, 'service[apache2]'
-      only_if { ::File.symlink?("#{node['apache']['dir']}/mods-enabled/#{params[:name]}.load") }
-    end
-  end
-end
--- a/Show More
+++ b/Show More
@@ -1 +1 @@
 .8.4
 .9