21b77c86df
modified depending on comments
2016-11-03 21:01:52 -04:00
672f1e8bd5
modified depending on comments
2016-11-03 04:21:57 -04:00
15e2a17a8b
move rsyslogd restart code from dhclient-script to doxcat
2016-11-02 01:04:21 -04:00
e3a826ef23
- Remove the USER/PASS clear text being sent back to syslog
...
- Remove the access display, doesn't look useful
2016-10-13 20:10:20 -04:00
d5205de146
Improve port change check
...
When changing the port when indicating NCSI
package, the comparison was inadequate. Improve
things by at least checking the shared/dedicated portion.
Note that it is not comparing the package id, which means
things are imperfect, though they are better than before.
However, it's not too shabby because the NIC being active
is the important part, the NCSI package change happening
later is ok, since the net config is still being put on
the correct IMM Nic.
2016-09-14 11:26:16 -04:00
bb460dc5ce
Provide a more adaptive approach to 'LOCKEDUSERS' in bmcsetup
2016-09-08 16:50:23 -04:00
18308688bf
Fix github issue #1591
2016-08-31 16:51:07 +08:00
f9d532b009
Fix issue 1638: Genesis not wait long enough time to have NICs get IP address
2016-08-05 03:02:21 -04:00
d6f0c89d43
Added block to restart rsyslogd after dhclient has been restarted. Moved restart to xCAT-genesis-scripts
2016-07-18 13:35:44 -04:00
8a4d0b9956
Fix issue 1495: Provision Dell PowerEdge M605 compute node hangs while setup BMC
2016-07-12 05:51:17 -04:00
9cfc24fbad
Fix the issue that discovery request is cut when sending to xcatd
2016-07-07 05:18:28 -04:00
482857fcfc
Merge pull request #1366 from whowutwut/dodiscover_msg
...
Fix some issues with the HW discovery script after testing on OpenPower
2016-07-05 10:34:00 +08:00
ce00394dff
- Undo some changes in doxcat that was causing problems.
...
- clean up some of the logging messages
2016-06-24 16:05:05 -04:00
1f121f11d9
Change the logger commands to print to stderr so that the SOL console
...
will record the messages
2016-06-24 16:00:31 -04:00
75bc7d91f4
refine hardware discovery framework, put mtms based hardware discovery to typemtms.pm module
2016-06-24 01:58:34 -04:00
9232e7eac1
Fix a typo in the doxcat script to grep ppc64
2016-06-23 07:45:54 -04:00
3d2605c2f2
Clean up some errors in bmcsetup script
...
- update some log messages
- do not run the mc reset cold for openPower systems
- create the 'mc info' output in a file in /tmp to reduce the number of ipmitool calls
- 300 is too large for chassis identify, change to 275
2016-06-22 15:50:25 -04:00
41b755a413
For getipmi script, change the rm to use the -f option
...
so that we avoid a warning message that the file does not exists.
Add a log label for logger messages
2016-06-22 14:21:14 -04:00
32743771ff
Clean up some of the messages in doxcat
...
- clean up some messages logged to syslog to help debugging
- Only start rsyslog and dhclient if not already started
2016-06-22 12:39:37 -04:00
3112a006d0
bmcsetup: allow to specify which port to share the BMC with
...
it would actually make sense to reverse the logic, and keep
ipmi.bmcport="0" for dedicated mode, and ipmi.bmcport="1" (or "2", "3",
"4") for shared with LOM1 (or LOM2, LOM3, LOM4) modes
2016-06-17 16:34:35 -07:00
39e8480ade
bmcsetup: remove &> bash-ism
2016-06-16 15:18:06 -07:00
195f80ee6e
bmcsetup: add support for Dell iDRAC
...
Sets the BMC NIC selection to either dedicated (ipmi.bmcport=1) or shared with failover all LOMs (ipmi.bmcport=0)
2016-06-16 15:12:54 -07:00
57478143d9
Fix variable user using issue
...
The variable (user) whose value is BMC username is reset as userid in line 365
2016-06-15 15:15:27 +08:00
650dadf406
Merge pull request #1283 from whowutwut/openpower_workaround
...
bmcsetup requires some changes to work around some issues with OpenPower BMC
2016-06-15 14:14:08 +08:00
4a03ed50dd
After the network commands are issued, pause for OpenPower case
2016-06-14 21:03:47 -04:00
761ff38a2e
Change the echo messages to logger messages
...
Add the -s option to logger to output the message to stderr
2016-06-14 19:32:03 -04:00
0dbdd8d5de
Fixed the code based on Er Tao's code review to put the status
...
check for non OpenPower based servers. OpenPower will use a different
method to check that bmc is ready
2016-06-14 11:46:04 -04:00
5860235832
The xCAT-nbroot has been replaced by xCAT-genesis
...
Removing the old files associated with nbroot/nbroot2
2016-06-10 15:45:26 -04:00
7f818a7066
Change the logging messages to reuse a single message for each IPMITOOL command
2016-06-10 15:22:30 -04:00
e8b6841eb1
Additional enhancement/cleanup for the bmcsetup scripts
...
- Move the TIMEOUT to be a global at the to of the script
- Ensure we are resetting the TRIES=0 right before using it (clean up some code format)
- Clean up the code for detecting the LAN channel, print out the detected channel
- Create a snooze function for OpenPower to sleep longer after network commands are issued
2016-06-10 13:26:31 -04:00
08e6606dca
Use a different ipmitool command for the OpenPower BMC to identify the light
2016-06-10 13:24:15 -04:00
fb93154806
Fix the formatting of this file, the indentations were incorrect
2016-06-10 13:23:35 -04:00
0f2b4be4c9
Add workaround code specific to OpenPower BMC where the BMC requires more
...
time to boot into a "ready" state after doing a cold reset
2016-06-10 11:41:44 -04:00
d1c1aad5c5
Add comments into bmcsetup to better understand the actions
...
of the ipmitool raw commands
2016-06-10 11:31:37 -04:00
2d193ad6bf
Merge pull request #1206 from xuweibj/S101003
...
Add genesis log in doxcat, dodiscovery and bmcsetup
2016-06-10 11:24:50 -04:00
547176bf58
Add genesis log in doxcat
2016-05-31 23:03:59 -04:00
d4a8bc6b6a
fix issue 1115: Don't run rspconfig after hardware discovery finished for servers Other than S822L(TLT)
2016-05-19 04:36:18 -04:00
dd6c9d0837
Have bmcsetup apply dual-byte bmcport right
...
bmcport can have a space in it. At least work somewhat
with that by removing the special IFS to allow it
2016-05-09 14:24:50 -04:00
4ca5938c4a
Fix issue 437, go to next state when exit shell
2016-04-28 03:33:34 -04:00
04dd30211f
mini refine for genesis script doxcat to have it run into bash if no NIC with IP facing xcat MN found
2016-04-15 03:56:53 -04:00
9869d148ac
Change to recognize newer Lenovo mfg id
2016-04-11 16:06:48 -04:00
322f769271
Merge pull request #891 from bybai/lsf
...
I don't have test environment now. Will merge this and add a comment in defect 445 @bybai
2016-04-07 10:53:15 +08:00
2f7b48f120
fix issue445 deleteraid/configraid enhancement
2016-04-05 03:21:29 -04:00
2dc8cf330d
Eliminate some Genesis boot errors
2016-04-04 15:21:21 -04:00
e47447bc1e
Make genesis to include bmc ip in the findme package
2016-04-01 02:15:43 -04:00
f0d96b30ca
For IBM Power 822LC and 812LC, it seems there is something wrong with
...
the firmware that causes the BMC to stop replying to ping a few seconds
after the changes are made. To work around this issue, sleep 30 before
doing the cold reset. Once the firmware is fixed, this reset is NOT
needed
2016-01-26 09:09:47 -05:00
709a6cb8ad
Fix the formatting of the bmcsetup script.
...
- replace the tabs wiht 4 spaces
- change the if statements to multiple lines to improve readability
2016-01-26 09:00:57 -05:00
c6e663d1fd
Use fifo pipe to enhance getadapter
...
Currently the getadapter implementation store the nics information
in multiple files. This implementaion will store the records in the
database and add the following changes:
1. Add taskstate table to record the getadapter request.
2. Add route_request hook in xcatd to avoid of too much process.
3. Add adapterinfo column to keep the adapter information.
4. Use fifo pipe to send/recv the adapter message and wake up the waiting process.
5. Use alarm signal to handle the timeout event.
2016-01-25 01:53:54 -05:00
c15027d4bb
Merge pull request #452 from hu-weihua/getadapters
...
Cool. Will merge it, eventually.
2015-12-15 12:44:26 +08:00
b0bf7931ac
modify depending on samveen 's comment
2015-11-27 03:02:02 -05:00
