chenglch
64ab7dbd27
Add rflash recovery support for Supermicro based firmware
...
This commit add recover option for rflash command to upload
bmc image with tftp when the BMC is in Brick Protection state.
Example:
```
rflash <node> --recover <image>
```
implement #3873
2017-09-11 02:44:22 -04:00
zet809
6e9971968b
Merge pull request #3793 from whowutwut/openbmc_rspcfg_hostname
...
Add Support for rspconfig to set/get hostname of the BMC
2017-09-01 12:51:01 +08:00
Victor Hu
2a36f20fdd
Adding changes to the man pages regarding hostname changing in rspconfig
2017-08-29 16:29:18 -04:00
Victor Hu
3935971a22
Merge pull request #3750 from gurevichmark/openbmc_upload_and_update
...
OpenBMC PNOR upload and activate firmware image file
2017-08-29 15:42:48 -04:00
Yuan Bai
fdda051859
Merge pull request #3686 from zet809/modify_doc_for_bmcdiscover_sn
...
add usage and manpage for bmcdiscover "--sn" option
2017-08-25 16:49:35 +08:00
ertaozh
7e14a543fe
modify description of "--sn" option for "bmcdiscover" according to Baiyuan's comments
2017-08-25 04:35:48 -04:00
Mark Gurevich
f64e84e374
Merge pull request #3677 from xuweibj/I3668
...
fix issue 3668, make rsetboot node do rsetboot stat
2017-08-23 21:59:03 -04:00
XuWei
da0c0bc0bb
modified depending on comments
2017-08-23 21:26:20 -04:00
Mark Gurevich
f69f9ec2bf
OpenBMC upload and activate firmware image file
2017-08-23 12:08:51 -04:00
Mark Gurevich
c8c1fc276f
Allow -d <directory name> flag for rflash
2017-08-21 15:12:41 -04:00
Mark Gurevich
c8ee22034d
Manpage and usage improvements
2017-08-17 10:48:36 -04:00
XuWei
eb3b720a40
modify man page
2017-08-16 22:52:30 -04:00
ertaozh
e4d8442e10
add usage and manpage for bmcdiscover "--sn" option
2017-08-15 04:27:54 -04:00
Mark Gurevich
0ca911b9f3
Usage and man page update
2017-08-03 14:50:46 -04:00
Mark Gurevich
1d9909e074
Updates from review
2017-08-01 14:14:44 -04:00
khm
cb8ce84249
xCAT-client: allow pgsqlsetup(1) to accept additional pg_hba entries ( #3527 )
...
* xCAT-client: allow pgsqlsetup(1) to accept additional pg_hba.conf entries
Currently pgsqlsetup(1) only sets up the MN ip address for access via
pg_hba.conf. This change adds a -a flag to allow the user to specify
additional addresses for use in that file.
This is useful for users who already know what IP addresses will be
used by their service nodes, so they can pass them directly to the
pgsqlsetup program, without needing to edit pg_hba.conf (and avoiding
needing to restart postgresql and xcat after the edit).
* xCAT-client: fix formatting in pgsqlsetup(1)
* pgsqlsetup.1.pod: clarify default setup
* pgsqlsetup.1.pod: update usage section to reflect access flag
* pgsqlsetup.1: refresh documentation
* xCAT-client/bin/pgsqlsetup: add -a/--access to usage statement
2017-07-25 02:34:50 -05:00
Yuan Bai
f329a2efa7
Merge pull request #3512 from chenglch/getadapter
...
Make getadapter work during discovery process
2017-07-24 15:17:17 +08:00
chenglch
e8df039d42
Make getadapter work during discovery process
...
This patch redesign the original getadapter plugins. Currently,
getadapter do not work as a common command but only a chain command
works during discovery.
2017-07-20 16:03:52 +08:00
chenglch
32525fc3dc
Merge pull request #3463 from gurevichmark/rflash_supermicro
...
rflash for Supermicro Briggs and Boston nodes
2017-07-19 09:13:36 +08:00
Mark Gurevich
9963d8e626
Review fixes
2017-07-17 12:35:11 -04:00
Mark Gurevich
464ef135d5
rflash for Supermicro Briggs and Boston nodes
2017-07-14 11:21:19 -04:00
XuWei
882d47c2b5
add describe of bmcreboot
2017-07-13 20:58:58 -04:00
XuWei
d84490af02
add related docs
2017-07-12 21:09:15 -04:00
Victor Hu
fccace532c
Add option to rpower for OpenBMC to return the state of the BMC.
...
This is a feature that the openbmc management utility allows us to
obtain over the REST interfaces
2017-07-11 14:53:18 -04:00
Victor Hu
1fe34083b6
Initial commit to support rpower softoff for openbmc
2017-07-10 16:18:03 -04:00
Mark Gurevich
662dc2a6de
Copy ssh keys to BMC with rspconfig command
2017-06-29 15:55:34 -04:00
Mark Gurevich
664f63b8bf
Fix formatting and grammar for sinv man page
2017-06-26 15:19:23 -04:00
Yuan Bai
434e353a65
Merge pull request #3314 from chenglch/getadapter
...
Format the ouput of getadapter result
2017-06-26 14:21:46 +08:00
chenglch
62d5037975
Format the ouput of getadapter result
...
This patch format the result of getadapter command and update
the man page to notice that `getadapter` will boot into genesis.
Fix-issue: #3046
2017-06-23 02:32:58 -04:00
Victor Hu
c7aff42ca2
Modify the description for verbose option in rinv
2017-06-22 21:00:43 -04:00
Victor Hu
27607d7495
Add verbose option to rinv for OpenBMC supported machines
2017-06-22 20:58:20 -04:00
Mark Gurevich
3c75e9cfae
Fix man page and usage for MPA rinv command
2017-06-21 13:30:07 -04:00
zet809
54a1e38ddd
Merge pull request #3145 from whowutwut/rinv_firm
...
Enhancements to rinv code to complete development
2017-06-19 16:54:13 +08:00
Victor Hu
b888c12291
Remove mprom from the man page for rinv
2017-06-09 08:00:30 -04:00
Victor Hu
1261e7601a
Merge pull request #3222 from gurevichmark/spelling_man1
...
Spelling for man1 and some formatting fixes
2017-06-07 10:25:27 -04:00
Mark Gurevich
ae09fdfe6d
Spelling for man1 and some formatting fixes
2017-06-06 13:04:41 -04:00
Mark Gurevich
d861f68995
Sync usage, man and code for ipmi rvitals
2017-06-05 10:56:59 -04:00
Victor Hu
bf382dcd10
Sync up the spelling to use: OpenPOWER and OpenBMC
2017-06-02 15:02:02 -04:00
Victor Hu
33371667cb
Remove options that are not supported for rinv
2017-05-30 22:45:00 -04:00
Victor Hu
b8894ed38b
Following changes based on review comments
...
* Modified to display altitude instead of length
* Print an output message if there is no values returned from the BMC
2017-05-30 14:32:07 -04:00
Victor Hu
74769080c8
Based on the OpenBMC Sensor API, complete the development code
...
for the supported options based on the possible values that are
currently allowed to be returned. As more data is added, the code
should be able to handle the printing of the data automatically
2017-05-24 22:49:14 -04:00
Mark Gurevich
d30d0156e7
rinv man page fix
2017-05-16 16:07:44 -04:00
Victor Hu
3d923652c5
Merge pull request #3024 from gurevichmark/rvitals_openbmc
...
Initial pass for OpenBMC rvitals
2017-05-11 17:11:16 -04:00
Mark Gurevich
d1fa11b29e
Merge pull request #2979 from xuweibj/manrinv
...
Add docs about rinv for openbmc
2017-05-11 09:03:26 -04:00
Mark Gurevich
18dc716959
Merge pull request #2951 from xuweibj/I2948
...
Add bmc specific for rpower in usage & return if encountered error
2017-05-11 09:00:36 -04:00
Mark Gurevich
c02c9269df
Initial pass for OpenBMC rvitals
2017-05-10 14:58:20 -04:00
zet809
d5c3e5d7ea
Merge pull request #3004 from cxhong/manntp
...
Modify the man page for makentp
2017-05-10 09:42:32 +08:00
Casandra Qiu
ca2b122982
Modified as ErTao's suggestion
2017-05-09 15:42:36 -04:00
Bin Xu
8b8a82627b
The tool to get xCAT node range operation performance baseline ( #2681 ) ( #2916 )
...
* Feature #2681 , to add a script in xCAT-test to get the performance baseline for node range operation.
* adopt review comments in PR#2916:
1, add the rst file for xcatperftest (#2681 )
2, using /bin/bash as script executor
3, FILES in manpage should not be in the same line
4, minor adjustment if PERF_NOCREATE/PERF_DRYRUN is set
2017-05-09 04:49:15 -05:00
Casandra Qiu
7c562905ef
Modify the man page for makentp
2017-05-08 14:02:18 -04:00
