e7dbcc9575
The bmcdiscover command does not actually support -c option.
...
Removing it from the documentation
2016-05-05 20:24:29 -04:00
7c92a214cd
Use the --check option in the examples to be consistent with the usage. The -c option is still OK
2016-05-05 19:48:32 -04:00
c5faf316a9
Enable lsvm for kvm hypervisor ( #1022 )
...
* Enable lsvm for kvm hypervisor
* Remove commented line
2016-05-04 13:53:33 -04:00
28fb5b8b2c
Merge pull request #1021 from whowutwut/postgres
...
small doc clenaup - simplify install of postgres instructions, change Redhat->RedHat
2016-05-03 11:47:27 -04:00
2498055246
Changing Redhat to RedHat, Update the install for postgres to be a single
...
package with a wildcard, the other packages will get pulled in with the wild card
2016-05-03 09:24:02 -04:00
c0ee488742
Remove '-n' from pasu documentation
...
The argument is not implemented and implementing it represents
some challenges.
2016-05-02 11:46:02 -04:00
a2815940c2
Update the missed .rst file changes to the master branch
2016-04-28 09:24:11 -04:00
4d8cddfebc
Merge pull request #961 from chenglch/heirarchicalattrtable
...
Add configuration in site table to inherit attributes
2016-04-28 18:16:36 +08:00
d82e14b566
Change the usage to contain the short options for simplicity
...
- Fix the behavior so we obtain the default user/pass from the passwd table
- overwrite the default using the command line options
- only the --check requires the user and pass to be passed in
- Do not display anything or write if the user/pass is incorrect, ERROR out
2016-04-28 00:18:56 -04:00
b8f4ceaab6
Add the -u and -p option back into the man page, this is supported when doing range
...
scanning for bmcdiscover command
2016-04-25 15:43:56 -04:00
45b13721d1
Add configuration in site table to inherit attributes
...
'heirarchicalattrs' is added in site table to apply attributes
from multiple groups in order.
close-issue #115
2016-04-22 04:53:24 -04:00
dc2d93cc50
Merge pull request #936 from gurevichmark/grub2_shell
...
Fix nodeset command for shell and shutdown options and fix usage and man page
2016-04-20 11:46:55 -04:00
d1bb364ff6
Fix nodeset command for shell and shutdown options and fix nodeset usage and man page
2016-04-18 14:14:10 -04:00
000ec281f1
Added some changes to mtms section based on the review comments.
2016-04-18 10:50:17 -04:00
b7c841999e
Refactor the MTMS section again to cover the two scenarios
...
- using bmcsetup to configure BMC with dhcp assigned IP address
- using bmcsetup to configure BMC with different IP in another subnet
2016-04-15 11:30:21 -04:00
7e2c7b680d
Refactor the MTMS section again to handle the DHCP and STATIC ip address case
...
Delete the mtms_discovery.rst file since the content is in the mtms directory
2016-04-15 11:30:21 -04:00
60112243db
Fix some spelling issues and wording issues in the configuration section
2016-04-15 11:28:37 -04:00
21e7f3bfe1
Change wording based on review comments
2016-04-15 11:28:37 -04:00
f283877e84
Refactor the mtms based discovery section to try and make the
...
MTMS hardware discovery process more clear
2016-04-15 11:28:36 -04:00
bb48f7f93d
Refactored the configure_xcat section in the admin guide, moving some of the
...
basic configuration over to the install guide so that we do not need to mention
that in the guide.
- split the configure_xcat.rst file into separate files under
a configure directory so that users can go from one section to
another without being overloaded with information
2016-04-15 11:28:36 -04:00
9c72e470ff
Add in information about the management node configuration during the install of the
...
management node so that there is no need to repeat the same information in the admin
guide later on in the documentation.
2016-04-15 11:28:36 -04:00
a4615fc8ba
rmvm command man page and type fixes
2016-04-14 15:09:36 -04:00
afeffe0df1
add description of rsetboot -u/-p in Usage.pm;refine the manpage
2016-04-12 02:41:14 -04:00
73bd16638c
fix issue 882 spelling mistake while stopping docker container
2016-04-06 21:56:05 -04:00
d5dd125d1a
Merge pull request #878 from penguhyang/update_rmigrate
...
update the doc about the troubshooting of KVM
2016-03-31 23:36:14 -05:00
e5147d1711
Merge pull request #789 from penguhyang/improve_debugmode
...
make a fixed value scope for site.xcatdebugmode(0 1 2)
2016-03-31 21:20:14 -05:00
d6b3ce9d0c
Merge pull request #817 from cxhong/swdiscover
...
Find switch vendor using snmpwalk command
2016-03-31 17:37:47 +08:00
7e306deac1
update the doc about the troubshooting of KVM
2016-03-31 02:27:57 -04:00
f85540aee2
Fix typo for makeconservercf
2016-03-30 20:03:32 -04:00
8ff7c029a5
recheckin switchdiscover.1.rst after ran create_man_page.py command
2016-03-30 10:44:22 -04:00
2584be6e11
modify switchdiscover command man page
2016-03-30 10:26:34 -04:00
aee2b62c25
update the rst file to match the pod changes in pull request 850
2016-03-29 19:26:23 -04:00
ac8488dc3f
Merge pull request #696 from penguhyang/rmigrate
...
update doc about the kvm
2016-03-29 02:43:26 -05:00
fb13e598f9
improve document quality about the kvm
2016-03-29 02:46:06 -04:00
f290743258
Merge pull request #813 from zet809/modify_docker_lifecycle_mgt_doc
...
Modify mkdocker/rmdocker manpage and docker lifecycle management doc tested
2016-03-28 17:01:00 +08:00
c6d543ad42
make a fixed value scope for xcatdebugmode
2016-03-25 05:45:38 -04:00
30efac5717
Modify mkdocker/rmdocker manpage and docker lifecycle management doc
2016-03-24 22:47:40 -04:00
c743aa9592
refine the doc on dhcp in large cluster; correcta typo
2016-03-24 21:34:45 -04:00
4488c24a30
Add snmp_scan method for switchdiscover command
2016-03-24 21:22:58 -04:00
2b5e08a92f
Update the description for netboot attribute
2016-03-23 04:07:19 -04:00
307277e333
Merge pull request #704 from whowutwut/bmcdiscover
...
Clean up the usage and manpage for bmcdiscover command
2016-03-22 17:32:49 +08:00
e8f3a2b295
Merge pull request #818 from pdlun92/rflash_bmc_status
...
rflash check_bmc_status_with_ipmitool raw command
2016-03-22 10:13:36 +08:00
66b2047714
Update the rst documents missed when making POD changes
2016-03-21 15:57:02 -04:00
d21f29b5bf
Fix bmcdiscover usage after code review
...
- change the bmcpwd option to bmcpasswd
2016-03-21 15:50:36 -04:00
bbe6b6b35c
Updated relevant comments in ipmi.pm. Removed rflash_delay description from Schema.pm and documentation/man pages
2016-03-21 14:54:48 -04:00
d0656e1235
Merge pull request #804 from whowutwut/ubuntu1604
...
Changes to support installing xCAT on Ubuntu 16.04 to unblock #790
2016-03-17 11:07:46 +08:00
cd31f32060
Make a note in the Ubunut Install guide that explains the lowercase "xcat"
2016-03-16 13:50:10 -04:00
1b58fa63bc
Merge pull request #743 from penguhyang/split_post.ubuntu
...
split the post.ubuntu, upgrade the post.xcat, logging the ubuntu installation information.
2016-03-16 11:04:51 +08:00
97e29171ba
split the post.ubuntu and upgrade the post.xcat
2016-03-15 02:59:31 -04:00
582b9d68d5
Clean up the usage and manpage for bmcdiscover
...
Improve the output message for --ipsource and --check
2016-03-12 08:10:07 -05:00
