xCAT/xcat-core
2
0
Fork 0
mirror of https://github.com/xcat2/xcat-core.git synced 2025-05-21 19:22:05 +00:00
Code Issues Releases Wiki Activity

Merge branch 'master' into rhels8-tmp

Browse Source
This commit is contained in:
GONG Jie 2019-02-26 16:53:49 +08:00
commit 4ee60e49f9
97 changed files with 4314 additions and 783 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
docs/source/guides/admin-guides/manage_clusters/common/deployment/cfg_partition.rst
View File

@ -2,7 +2,6 @@
By default, xCAT will install the operating system on the first disk and with default partitions layout in the node. However, you may choose to customize the disk partitioning during the install process and define a specific disk layout. You can do this in one of two ways: '**partition definition file**' or '**partition definition script**'.
**Notes**
.. note:: ``partition definition file`` can be used for RedHat, SLES, and Ubuntu. Because disk configuraiton for Ubuntu is different from RedHat, there may be some special sections required for Ubuntu.
.. warning:: ``partition definition script`` has only been tested on RedHat and Ubuntu, use at your own risk for SLES.

25
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_install.rst
View File

@ -1,9 +1,7 @@
Synchronizing Files during the installation process
----------------------------------------------------
---------------------------------------------------
The policy table must have the entry to allow syncfiles postscript to access the Management Node. Make sure this entry is in your table:
``tabdump policy`` ::
The **policy** table must have the entry to allow **syncfiles** postscript to access the Management Node. Make sure this entry is in your **policy** table: ::
#priority,name,host,commands,noderange,parameters,time,rule,comments,disable
.
@ -15,23 +13,21 @@ The policy table must have the entry to allow syncfiles postscript to access the
Hierarchy and Service Nodes
~~~~~~~~~~~~~~~~~~~~~~~~~~~
If using Service nodes to manage you nodes, you should make sure that the service nodes have been synchronized with the latest files from the Management Node before installing. If you have a group of compute nodes (compute) that are going to be installed that are serviced by SN1, then run the following before the install to sync the current files to SN1. Note: the noderange is the compute node names, updatenode will figure out which service nodes need updating.
If using Service nodes to manage you nodes, you should make sure that the service nodes have been synchronized with the latest files from the Management Node before installing. If you have a group of compute nodes **compute** that are going to be installed that are serviced by SN1, then run the following before the install to sync the current files to SN1.::
``updatenode compute -f``
updatenode compute -f
.. note:: ``updatenode`` will figure out which service nodes need updating.
Diskful installation
~~~~~~~~~~~~~~~~~~~~
The 'syncfiles' postscript is in the defaults section of the postscripts table. To enable the syn files postscript to sync files to the nodes during install the user need to do the following:
The **syncfiles** postscript is in the defaults section of the **postscripts** table. To enable the **syncfiles** postscript to sync files to the nodes during install the user need to do the following:
* Create the synclist file with the entries indicating which files should be synced. (refer to :ref:`The_Format_of_synclist_file_label` )
* Put the synclist into the proper location for the node type (refer to :ref:`the_localtion_of_synclist_file_for_updatenode_label`)
Make sure your postscripts table has the syncfiles postscript listed
``tabdump postscripts`` ::
Make sure your **postscripts** table has the syncfiles postscript listed::
#node,postscripts,postbootscripts,comments,disable
"xcatdefaults","syslog,remoteshell,syncfiles","otherpkgs",,
@ -39,9 +35,8 @@ Make sure your postscripts table has the syncfiles postscript listed
Diskless Installation
~~~~~~~~~~~~~~~~~~~~~
The diskless boot is similar with the diskful installation for the synchronizing files operation, except that the packimage commands will sync files to the root directories of image during the creating image process.
The diskless boot is similar with the diskful installation for the synchronizing files operation, except that the ``packimage`` command will sync files to the root directories of image during the creating image process.
Creating the synclist file as the steps in Diskful installation section, then the synced files will be synced to the os image during the packimage and mkdsklsnode commands running.
Creating the synclist file as the steps in Diskful installation section, then the synced files will be synced to the os image during the ``packimage`` and ``mkdsklsnode`` commands running.
Also the files will always be re-synced during the booting up of the diskless node.

20
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_overview.rst
View File

@ -1,24 +1,26 @@
Overview
--------
Synchronizing (sync) files to the nodes is a feature of xCAT used to distribute specific files from the management node to the new-deploying or deployed nodes.
Synchronizing (sync) files to the nodes is a feature of xCAT used to distribute specific files from the management node to the newly-deploying or deployed nodes.
This function is supported for diskful or RAMdisk-based diskless nodes. Generally, the specific files are usually the system configuration files for the nodes in the **/etc/directory**, like **/etc/hosts**, **/etc/resolve.conf**; it also could be the application programs configuration files for the nodes. The advantages of this function are: it can parallel sync files to the nodes or nodegroup for the installed nodes; it can automatically sync files to the newly-installing node after the installation. Additionally, this feature also supports the flexible format to define the synced files in a configuration file, called **'synclist'**.
This function is supported for diskful or RAMdisk-based diskless nodes. Generally, the specific files are usually the system configuration files for the nodes in the **/etc** directory, like **/etc/hosts**, **/etc/resolve.conf**; it also could be the application programs configuration files for the nodes. The advantages of this function are: it can parallel sync files to the nodes or nodegroup for the installed nodes; it can automatically sync files to the newly-installing node after the installation. Additionally, this feature also supports the flexible format to define the files to be synced in a configuration file, called "synclist".
The synclist file can be a common one for a group of nodes using the same profile or osimage, or can be the special one for a particular node. Since the location of the synclist file will be used to find the synclist file, the common synclist should be put in a given location for Linux nodes or specified by the osimage.
The synclist file can be a common one for a group of nodes using the same profile or osimage, or can be the unique for each particular node. Since the location of the synclist file will be used to find the synclist file, the common synclist should be put in a given location for Linux nodes or specified by the osimage.
``xdcp`` command supplies the basic Syncing File function. If the **'-F synclist'** option is specified in the ``xdcp`` command, it syncs files configured in the synclist to the nodes. If the **'-i PATH'** option is specified with **'-F synclist'**, it syncs files to the root image located in the PATH directory. (**Note: the '-i PATH' option is only supported for Linux nodes**)
``xdcp`` command supplies the basic Syncing File function. If the **-F synclist** option is specified in the ``xdcp`` command, it syncs files configured in the synclist to the nodes. If the **-i <install image path>** option is specified with **-F synclist**, it syncs files to the root image located in the <install image path> directory.
``xdcp`` supports hierarchy where service nodes are used. If a node is serviced by a service node, ``xdcp`` will sync the files to the service node first, then sync the files from service node to the compute node. The files are place in an intermediate directory on the service node defined by the SNsyncfiledir attribute in the site table. The default is **/var/xcat/syncfiles**.
.. note:: The **-i <install image path>** option is only supported for Linux nodes
``xdcp`` supports hierarchy where service nodes are used. If a node is serviced by a service node, ``xdcp`` will sync the files to the service node first, then sync the files from service node to the compute node. The files are placed in an intermediate directory on the service node defined by the **SNsyncfiledir** attribute in the **site** table. The default is **/var/xcat/syncfiles**.
Since ``updatenode -F`` calls the ``xdcp`` to handle the Syncing File function, the ``updatenode -F`` also supports the hierarchy.
For a new-installing nodes, the Syncing File action will be triggered when performing the postscripts for the nodes. A special postscript named **'syncfiles'** is used to initiate the Syncing File process.
For a new-installing nodes, the Syncing File action will be triggered when running the postscripts for the nodes. A special postscript named **syncfiles** is used to initiate the Syncing File process.
The postscript **'syncfiles'** is located in the **/install/postscripts/**. When running, it sends a message to the xcatd on the management node or service node, then the xcatd figures out the corresponding synclist file for the node and calls the ``xdcp`` command to sync files in the synclist to the node.
The postscript **syncfiles** is located in the **/install/postscripts/**. When running, it sends a message to the **xcatd** on the management node or service node, then the **xcatd** figures out the corresponding synclist file for the node and calls the ``xdcp`` command to sync files in the synclist to the node.
**If installing nodes in a hierarchical configuration, you must sync the Service Nodes first to make sure they are updated. The compute nodes will be sync'd from their service nodes. You can use the** ``updatenode <computenodes> -f`` **command to sync all the service nodes for range of compute nodes provided.**
If installing nodes in a hierarchical configuration, you must sync the service nodes first to make sure they are updated. The compute nodes will be synced from their service nodes. You can use the ``updatenode <computenodes> -f`` command to sync all the service nodes for range of compute nodes provided.
For an installed nodes, the Syncing File action happens when performing the ``updatenode -F`` or ``xdcp -F synclist`` command to update a nodes. If performing the ``updatenode -F``, it figures out the location of the synclist files for all the nodes and classify the nodes which using same synclist file and then calls the ``xdcp -F synclist`` to sync files to the nodes.
For an installed nodes, the Syncing File action happens when performing the ``updatenode -F`` or ``xdcp -F synclist`` command to update a nodes. While performing the ``updatenode -F``, it figures out the location of the synclist files for all the nodes and groups the nodes which will be using the same synclist file and then calls the ``xdcp -F synclist`` to sync files to the nodes.

15
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_periodically.rst
View File

@ -1,24 +1,15 @@
Run the Syncing File action periodically
-----------------------------------------
----------------------------------------
If the admins want to run the Syncing File action automatically or periodically, the ``xdcp -F``, ``xdcp -i -F`` and ``updatenode -F`` commands can be used in the script, crontab or FAM directly.
For example:
Use the cron daemon to sync files in the **/install/custom/<inst_type>/<distro>/<profile>.<os>.synclist** to the nodegroup 'compute' every 10 minutes by the xdcp command by adding this to crontab. : ::
Use the **cron** daemon to sync files in the **/install/custom/<inst_type>/<distro>/<profile>.<os>.synclist** to the nodegroup **compute** every 10 minutes with the **xdcp** command by adding this to **crontab**. : ::
*/10 * * * * root /opt/xcat/bin/xdcp compute -F /install/custom/<inst_type>/<distro>/<profile>.<distro>.synclist
Use the cron daemon to sync files for the nodegroup 'compute' every 10 minutes by updatenode command. ::
Use the **cron** daemon to sync files for the nodegroup **compute** every 10 minutes with ``updatenode`` command. ::
*/10 * * * * root /opt/xcat/bin/updatenode compute -F
** Related To do**
Add reference

41
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_synclist_file.rst
View File

@ -33,15 +33,15 @@ sync file **/etc/file2** to the file **/etc/file3** on the node (with different
/etc/file2 -> /etc/file3
sync file **/etc/file4** to the file **/etc/tmp/file5** on the node( different file name and directory). The directory will be automatically created for you. ::
sync file **/etc/file4** to the file **/etc/tmp/file5** on the node (different file name and directory). The directory will be automatically created for you. ::
/etc/file4 -> /etc/tmp/file5
sync the multiple files **/etc/file1**, **/etc/file2**, **/etc/file3**, ... to the directory **/tmp/etc** (**/tmp/etc** must be a directory when multiple files are synced at one time). If the directory does not exist, **xdcp** will create it. ::
sync the multiple files **/etc/file1**, **/etc/file2**, **/etc/file3**, ... to the directory **/tmp/etc** (**/tmp/etc** must be a directory when multiple files are synced at one time). If the directory does not exist, it will be created. ::
/etc/file1 /etc/file2 /etc/file3 -> /tmp/etc
sync file **/etc/file2** to the file /etc/file2 on the node ::
sync file **/etc/file2** to the file **/etc/file2** on the node ::
/etc/file2 -> /etc/
@ -49,7 +49,7 @@ sync all files in **/home/mikev** to directory **/home/mikev** on the node ::
/home/mikev/* -> /home/mikev/
Note: Don't try to sync files to the read only directory on the target node.
.. note:: Don't try to sync files to the read only directory on the target node.
An example of synclist file
~~~~~~~~~~~~~~~~~~~~~~~~~~~
@ -59,7 +59,7 @@ Sync the file **/etc/common_hosts** to the two places on the target node: put on
/etc/common_hosts -> /etc/hosts
/etc/common_hosts -> /tmp/etc/hosts
Sync files in the directory **/tmp/prog1** to the directory **/prog1** on the target node, and the postfix **'.tmpl'** needs to be removed on the target node. (directory **/tmp/prog1/** contains two files: **conf1.tmpl** and **conf2.tmpl**) Following configuration entries should be added ::
Sync files in the directory **/tmp/prog1** to the directory **/prog1** on the target node, and the postfix **.tmpl** needs to be removed on the target node. (directory **/tmp/prog1/** contains two files: **conf1.tmpl** and **conf2.tmpl**) Following configuration entries should be added ::
/tmp/prog1/conf1.tmpl -> /prog1/conf1
/tmp/prog1/conf2.tmpl -> /prog1/conf2
@ -78,7 +78,7 @@ Sample synclist file ::
/tmp/* -> /tmp/
/etc/testfile -> /etc/
If the above syncfile is used by the **updatenode/xdcp** commands, or used in a node installation process, the following files will exist on the target node with the following contents. ::
If the above syncfile is used by the ``updatenode``/``xdcp`` commands, or used in a node installation process, the following files will exist on the target node with the following contents. ::
/etc/hosts(It has the same content with /etc/common_hosts on the MN)
/tmp/etc/hosts(It has the same content with /etc/common_hosts on the MN)
@ -104,29 +104,24 @@ The noderange can have several formats. Following examples show that **/etc/host
/etc/hosts -> (group1) /etc/hosts # The /etc/hosts file is synced to nodes in group1
/etc/hosts -> (group1,group2) /etc/hosts # The /etc/hosts file is synced to nodes in group1 and group2
postscript support
~~~~~~~~~~~~~~~~~~
Putting the filename.post in the **rsyncfile** to ``rsync`` to the node is required for hierarchical clusters. It is optional for non-hierarchical cluster.
Advanced synclist file features
'''''''''''''''''''''''''''''''
**EXECUTE**
The **EXECUTE** clause is used to list all the postscripts you would like to run after the files are sync'd, only if the file is updated. The files in this list must be added to the list of files to rsync. If noderange is used in the synclistfor the file listed in the **EXECUTE** clause, the script will only be exectuted on the nodes in that noderange.
The **EXECUTE** clause is used to list all the postsync scripts (<filename>.post) you would like to run after the files are synced, only if the file <filename> is updated. For hierarchical clusters, the postsync files in this list must also be added to the list of files to sync. It is optional for non-hierarchical clusters. If noderange is used in the synclist for the file listed in the **EXECUTE** clause, the postsync script will only be executed on the nodes in that noderange. The **EXECUTE** clause is not supported oif ``-r /usr/bin/scp`` option is used with ``xdcp`` or ``updatenode`` command.
**EXECUTEALWAYS**
The **EXECUTEALWAYS** clause is used to list all the postscripts you would like to run after the files are sync'd, whether or not any file is actually updated. The files in this list must be added to the list of files to rsync. If noderange is used in the synclist for the file listed in the **EXECUTEALWAYS** clause, the script will only be exectuted on the nodes in that noderange.
The **EXECUTEALWAYS** clause is used to list all the postsync scripts you would like to run after the files are synced, whether or not any file is actually updated. The files in this list must be added to the list of files to sync. If noderange is used in the synclist for the file listed in the **EXECUTEALWAYS** clause, the script will only be exectuted on the nodes in that noderange.
.. note:: The path to the file to EXECUTE or EXECUTEALWAYS, is the location of the file on the MN.
For example, your rsyncfile may look like this.::
For example, your syncfile may look like this.::
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post (required for hierarchical clusters)
/tmp/share/file3 -> /tmp/file3
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post (required for hierarchical clusters)
/tmp/myscript1 -> /tmp/myscript1
/tmp/myscript2 -> /tmp/myscript2
@ -138,7 +133,7 @@ For example, your rsyncfile may look like this.::
/tmp/myscript1
/tmp/myscript2
If **/tmp/file2** is updated on the node in **/tmp/file2**, then **/tmp/file2**.post is automatically run on that node. If **/tmp/file3** is updated on the node in **/tmp/filex**, then **/tmp/file3**.post is automatically run on that node.
If **/tmp/file2** is updated on the node in **/tmp/file2**, then **/tmp/file2.post** is automatically executed on that node. If **/tmp/file3** is updated on the node in **/tmp/filex**, then **/tmp/file3.post** is automatically executed on that node.
**APPEND**
@ -163,11 +158,11 @@ For example, your synclist file may look like this: ::
When you use the **APPEND** clause, the source file to the left of the arrow is appended to the file to the right of the arrow. In this example, **/etc/myappenddir/appendfile** is appended to **/etc/mysetup/setup** file, which must already exist on the node. The **/opt/xcat/share/xcat/scripts/xdcpappend.sh** is used to accomplish this.
The script creates a backup of the original file on the node in the directory defined by the site table `nodesyncfiledir` attribute, which is **/var/xcat/node/syncfiles** by default. To update the original file when using the function, you need to rsync a new original file to the node, removed the old original from the **/var/xcat/node/syncfiles/org** directory. If you want to cleanup all the files for the append function on the node, you can use ``xdsh -c`` flag. See man page for ``xdsh``.
The script creates a backup of the original file on the node in the directory defined by the **site** table **nodesyncfiledir** attribute, which is **/var/xcat/node/syncfiles** by default. To update the original file when using the function, you need to sync a new original file to the node, removed the old original from the **/var/xcat/node/syncfiles/org** directory. If you want to cleanup all the files for the append function on the node, you can use ``xdsh -c`` command. See man page for ``xdsh``.
**MERGE** (supported on Linux only).
The **MERGE** clause is used to append the contents of the input file to either the **/etc/passwd**, **/etc/shadow** or **/etc/group** files. They are the only supported files. You must not put the **/etc/passwd**, **/etc/shadow**, **/etc/group** files in an **APPEND** clause if using a **MERGE** clause. For these three files you should use the **MERGE** clause. The **APPEND** will add the information to the end of the file. The **MERGE** will add or replace the information and insure that there are no duplicate entries in these files.
The **MERGE** clause is used to append the contents of the input file to either the **/etc/passwd**, **/etc/shadow** or **/etc/group** files. They are the only supported files. You must not put the **/etc/passwd**, **/etc/shadow**, **/etc/group** files in an **APPEND** clause if using a **MERGE** clause. For these three files you should use the **MERGE** clause. The **APPEND** will add the information to the end of the file. The **MERGE** will add or replace the information and ensure that there are no duplicate entries in these files.
For example, your synclist file may look like this ::
@ -187,7 +182,7 @@ For example, your synclist file may look like this ::
/etc/mydir/mergeshadow -> /etc/shadow
/etc/mydir/mergegroup -> /etc/group
When you use the **MERGE** clause, the source file to the left of the arrow is merged into the file to the right of the arrow. It will replace any common userid's found in those files and add new userids. The **/opt/xcat/share/xcat/scripts/xdcpmerge.sh** is used to accomplish this.
When you use the **MERGE** clause, the source file to the left of the arrow is merged into the file to the right of the arrow. It will replace any common userids found in those files and add new userids. The **/opt/xcat/share/xcat/scripts/xdcpmerge.sh** is used to accomplish this.
.. note:: no order of execution may be assumed by the order of **EXECUTE, EXECUTEALWAYS, APPEND and MERGE** clauses in the synclist file.
@ -198,7 +193,7 @@ The location of synclist file for updatenode and install process
In the installation process or **updatenode** process, xCAT needs to figure out the location of the synclist file automatically, so the synclist should be put into the specified place with the proper name.
If the provisioning method for the node is an osimage name, then the path to the synclist will be read from the osimage definition `synclists` attribute. You can display this information by running the following command, supplying your osimage name. ::
If the provisioning method for the node is an osimage name, then the path to the synclist will be read from the osimage definition **synclists** attribute. You can display this information by running the following command, supplying your osimage name. ::
lsdef -t osimage -l <os>-<arch>-netboot-compute
@ -216,7 +211,7 @@ If the provisioning method for the node is an osimage name, then the path to the
rootimgdir=/install/netboot/<os>/<arch>/compute
**synclists=/install/custom/netboot/compute.synclist**
You can set the `synclist` path using the following command ::
You can set the synclist path using the following command ::
chdef -t osimage -o <os>-<arch>-netboot-compute synclists="/install/custom/netboot/compute.synclist
@ -229,11 +224,11 @@ If the provisioning method for the node is `install`, or `netboot` then the path
<profile>, <os> and <arch> are what you set for the node
For example:
The location of synclist file for the diskful installation of RedHat 7.5 with 'compute' as the profile ::
The location of synclist file for the diskful installation of RedHat 7.5 with **compute** as the profile ::
/install/custom/install/rh/compute.rhels7.5.synclist
The location of synclist file for the diskless netboot of SLES 12.3 with 'service' as the profile ::
The location of synclist file for the diskless netboot of SLES 12.3 with **service** as the profile ::
/install/custom/netboot/sles/service.sles12.3.synclist

8
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_updatenode.rst
View File

@ -1,7 +1,7 @@
Run the Syncing File action in the updatenode process
------------------------------------------------------
-----------------------------------------------------
If run ``updatenode`` command with -F option, it syncs files which configured in the synclist to the nodes. ``updatenode`` does not sync images, use ``xdcp -i -F`` option to sync images.
Running ``updatenode`` command with **-F** option, will sync files configured in the synclist file to the nodes. ``updatenode`` does not sync images, use ``xdcp -i -F`` command to sync images.
``updatenode`` can be used to sync files to to diskful or diskless nodes. ``updatenode`` cannot be used to sync files to statelite nodes.
@ -9,7 +9,7 @@ Steps to make the Syncing File working in the ``updatenode -F`` command:
#. Create the synclist file with the entries indicating which files should be synced. (refer to :ref:`The_Format_of_synclist_file_label`)
#. Put the synclist into the proper location (refer to :ref:`the_localtion_of_synclist_file_for_updatenode_label`).
#. Run the ``updatenode node -F`` command to initiate the Syncing File action.
#. Run the ``updatenode <noderange> -F`` command to initiate the Syncing File action.
Note: Since Syncing File action can be initiated by the ``updatenode -F`` flag, the ``updatenode -P`` does NOT support to re-run the **'syncfiles'** postscript, even if you specify the **'syncfiles'** postscript in the ``updatenode`` command line or set the **'syncfiles'** in the **postscripts.postscripts** attribute.
.. note:: Since Syncing File action can be initiated by the ``updatenode -F``, the ``updatenode -P`` does NOT support to re-run the **syncfiles** postscript, even if you specify the **syncfiles** postscript on the ``updatenode`` command line or set the **syncfiles** in the **postscripts.postscripts** attribute.

23
docs/source/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_xdcp.rst
View File

@ -1,30 +1,31 @@
Run xdcp command to perform Syncing File action
------------------------------------------------
``xdcp`` command supplies three options **'-F' , -s, and '-i'** to support the Syncing File function.
``xdcp`` command supplies three options **-F** , **-s**, and **-i** to support the Syncing File function.
* -F|--File rsync input file
* -F|--File <synclist input file>
Specifies the full path to the synclist file that will be used to build the ``rsync`` command
Specifies the full path to the synclist file
* -s
* -s
Specifies to rsync to the service nodes only for the input compute noderange.
Specifies to sync to the service nodes only for the input compute noderange.
* -i|--rootimg install image for Linux
* -i | --rootimg <install image for Linux>
Specifies the full path to the install image on the local node. By default, if the -F option is specified, the **'rsync'** command is used to perform the syncing file function. For the ``rsync`` in ``xdcp``, only the ***ssh** remote shell is supported for ``rsync``. ``xdcp`` uses the **'-Lpotz'** as the default flags to call the rsync command. More flags for rsync command can be specified by adding **'-o'** flag to the call to ``xdcp``.
Specifies the full path to the install image on the local node.
For example: ::
By default, if the **-F** option is specified, the ``rsync`` command is used to perform the syncing file function. Only the **ssh** remote shell is supported for ``rsync``. ``xdcp`` uses the **-Lpotz** as the default flags to call the ``rsync`` command. More flags for ``rsync`` command can be specified by adding **-o** flag to the call to ``xdcp``.
For example you can use ``xdcp`` **-F** option to sync files which are listed in the **/install/custom/commonsyncfiles/<profile>.synclist** file to the node group named **compute**. If the node group **compute** is serviced by servicenodes, then the files will be automatically staged to the correct service nodes, and then synced to the compute nodes from those service nodes. The files will be stored in **/var/xcat/syncfiles** directory on the service nodes by default, or in the directory indicated in the **site.SNsyncfiledir** attribute. See **-s** option below. ::
Using xdcp '-F' option to sync files which are listed in the /install/custom/commonsyncfiles/<profile>.synclist directory to the node group named 'compute'. If the node group compute is serviced by servicenodes, then the files will be automatically staged to the correct service nodes, and then synced to the compute nodes from those service nodes. The files will be stored in /var/xcat/syncfiles directory on the service nodes by default, or in the directory indicated in the site.SNsyncfiledir attribute. See -s option below.
xdcp compute -F /install/custom/commonsynfiles/<profile>.synclist
For Linux nodes, using **xdcp '-i'** option with **'-F'** to sync files created in the **/install/custom/<inst_type>/<os><profile>.synclist** to the osimage in the directory **/install/<inst_type>/<os>/<arch>/<profile>/rootimg**: ::
For Linux nodes, you can use ``xdcp`` command **-i** option with **-F** to sync files specified in the **/install/custom/<inst_type>/<os><profile>.synclist** file to the osimage in the directory **/install/<inst_type>/<os>/<arch>/<profile>/rootimg**: ::
xdcp -i /install/<inst_type>/<os>/<arch>/<profile>/rootimg -F /install/custom/<inst_type>/<os>/<profile>.synclist
Using the **xdcp '-s'** option to sync the files only to the service nodes for the node group named 'compute'. The files will be placed in the default **/var/xcat/syncfiles** directory or in the directory as indicated in the **site.SNsyncfiledir** attribute. If you want the files synched to the same directory on the service node that they come from on the Management Node, set **site.SNsyncfiledir=/**. This can be setup before a node install, to have the files available to be synced during the install: ::
You can use the ``xdcp`` **-s** option to sync the files only to the service nodes for the node group named **compute**. The files will be placed in the default **/var/xcat/syncfiles** directory or in the directory as indicated in the **site.SNsyncfiledir** attribute. If you want the files synched to the same directory on the service node that they come from on the Management Node, set **site.SNsyncfiledir=/** attribute. This can be setup before a node install, to have the files available to be synced during the install: ::
xdcp compute -s -F /install/custom/<inst_type>/<os>/<profile>.synclist

6
docs/source/guides/admin-guides/references/man1/lsdef.1.rst
View File

@ -22,12 +22,12 @@ SYNOPSIS
\ **lsdef**\ [\ **-h | -**\ **-help**\ ] [\ **-t**\ \ *object-types*\ ] [\ **-i**\ \ *attr-list*\ ]
\ **lsdef**\ [\ **-V | -**\ **-verbose**\ ] [\ **-a | -**\ **-all**\ ] [\ **-S**\ ]
[\ **-t**\ \ *object-types*\ ] [\ **-o**\ \ *object-names*\ ] [\ **-z | -**\ **-stanza**\ ] [\ [\ **-i**\ \ *attr-list*\] | [\ **-l | -**\ **-long**\ ] | [\ **-s | -**\ **-short**\ ]]
[\ **-t**\ \ *object-types*\ ] [\ **-o**\ \ *object-names*\ ] [\ **-z | -**\ **-stanza**\ ] [\ **-i**\ \ *attr-list*\ | [\ **-l | -**\ **-long**\ ] | [\ **-s | -**\ **-short**\ ]]
[\ **-c | -**\ **-compress**\ ] [\ **-**\ **-osimage**\ ] [\ **-**\ **-nics**\ ] [[\ **-w**\ \ *attr*\ ==\ *val*\ ]
[\ **-w**\ \ *attr*\ =~\ *val*\ ] ...] [\ *noderange*\ ]
\ **lsdef**\ [\ **-a | -**\ **-all**\ ] [\ **-t**\ \ *object-types*\ ] [\ **-z | -**\ **-stanza**\ ]
[\ [\ **-i**\ \ *attr-list*\] | [\ **-l | -**\ **-long**\ ] | [\ **-s | -**\ **-short**\ ]] [\ **-**\ **-template**\ [\ *template-object-name*\ ]]
[\ **-i**\ \ *attr-list*\ | [\ **-l | -**\ **-long**\ ] | [\ **-s | -**\ **-short**\ ]] [\ **-**\ **-template**\ [\ *template-object-name*\ ]]
***********
@ -155,7 +155,7 @@ OPTIONS
\ **-z|-**\ **-stanza**\
Display output in stanza format. See the "xcatstanzafile" man page for details on using xCAT stanza files.
Display output in stanza format. See the "xcatstanzafile" man page for details on using xCAT stanza files. And default is to list complete object definition, use \ **-i**\ to specify the attribute scope.

52
docs/source/guides/admin-guides/references/man1/updatenode.1.rst
View File

@ -19,7 +19,7 @@ SYNOPSIS
********
\ **updatenode**\ \ *noderange*\ [\ **-V | -**\ **-verbose**\ ] [\ **-F | -**\ **-sync**\ ] [\ **-f | -**\ **-snsync**\ ] [\ **-r | -**\ **-node-rcp**\ [\ *full_path_to_remote_copy_command*\ ]] [\ **-S | -**\ **-sw**\ ] [\ **-l**\ \ *userID*\ ] [\ **-P | -**\ **-scripts**\ [\ *script1,script2...*\ ]] [\ **-s | -**\ **-sn**\ ] [\ **-A | -**\ **-updateallsw**\ ] [\ **-c | -**\ **-cmdlineonly**\ ] [\ **-d**\ \ *alt_source_dir*\ ] [\ **-**\ **-fanout**\ =\ *fanout_value*\ ] [\ **-t**\ \ *timeout*\ } [\ *attr=val*\ [\ *attr=val...*\ ]] [\ **-n | -**\ **-noverify**\ ]
\ **updatenode**\ \ *noderange*\ [\ **-V | -**\ **-verbose**\ ] [\ **-F | -**\ **-sync**\ ] [\ **-f | -**\ **-snsync**\ ] [\ **-r | -**\ **-node-rcp**\ [\ *node_remote_copy_command*\ ]] [\ **-S | -**\ **-sw**\ ] [\ **-l**\ \ *userID*\ ] [\ **-P | -**\ **-scripts**\ [\ *script1,script2...*\ ]] [\ **-s | -**\ **-sn**\ ] [\ **-A | -**\ **-updateallsw**\ ] [\ **-c | -**\ **-cmdlineonly**\ ] [\ **-d**\ \ *alt_source_dir*\ ] [\ **-**\ **-fanout**\ =\ *fanout_value*\ ] [\ **-t**\ \ *timeout*\ } [\ *attr=val*\ [\ *attr=val...*\ ]] [\ **-n | -**\ **-noverify**\ ]
\ **updatenode**\ \ **noderange**\ [\ **-k | -**\ **-security**\ ] [\ **-t**\ \ *timeout*\ ]
@ -37,7 +37,7 @@ DESCRIPTION
***********
The updatenode command is run on the xCAT management node and can be used
The \ **updatenode**\ command is run on the xCAT management node and can be used
to perform the following node updates:
@ -58,9 +58,9 @@ Update the ca and credentials for the service nodes.
The default behavior when no options are input to updatenode will be to run
The default behavior when no options are input to \ **updatenode**\ will be to run
the following options \ **-S**\ , \ **-P**\ and \ **-F**\ options in this order.
If you wish to limit updatenode to specific
If you wish to limit \ **updatenode**\ to specific
actions you can use combinations of the \ **-S**\ , \ **-P**\ , and \ **-F**\ flags.
For example, If you just want to synchronize configuration file you could
@ -74,7 +74,7 @@ The flag \ **-f**\ (\ **-**\ **-snsync**\ ) can NOT be used together with \ **-
Note: In a large cluster environment the updating of nodes in an ad hoc
manner can quickly get out of hand, leaving the system administrator with
a very confusing environment to deal with. The updatenode command is
a very confusing environment to deal with. The \ **updatenode**\ command is
designed to encourage users to handle cluster updates in a manner that
is recorded and easily repeatable.
@ -93,14 +93,14 @@ The basic process for distributing and synchronizing nodes is:
\* Run the updatenode command to update the nodes.
\* Run the \ **updatenode**\ command to update the nodes.
Files may be distributed and synchronized for both diskless and
diskful nodes. Syncing files to NFS-based statelite nodes is not supported.
More information on using the synchronization file function is in the following doc: Using_Updatenode.
More information on using the synchronization file function is in the following document: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_updatenode.html>
Create the synclist file
------------------------
@ -111,9 +111,7 @@ where the files should be synced to. In the synclist file, each
line is an entry which describes the location of the source files
and the destination location for the files on the target node.
For more information on creating your synclist files and where to put them, read:
Sync-ing_Config_Files_to_Nodes
For more information on creating your synclist files and where to put them, read here: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_synclist_file.html>
Run updatenode to synchronize the files
@ -382,12 +380,12 @@ OPTIONS
\ **-F|-**\ **-sync**\
Specifies that file synchronization should be
performed on the nodes. rsync/scp and ssh must
performed on the nodes. \ **rsync/scp**\ and \ **ssh**\ must
be installed and configured on the nodes.
The function is not supported for NFS-based statelite installations.
For NFS-based statelite installations to sync files, you should use the
read-only option for files/directories listed in
litefile table with source location specified in the litetree table.
\ **litefile**\ table with source location specified in the \ **litetree**\ table.
@ -396,33 +394,33 @@ OPTIONS
Specifies that file synchronization should be
performed to the service nodes that service the
nodes in the noderange. This updates the service
nodes with the data to sync to the nodes. rsync/scp and ssh must
nodes with the data to sync to the nodes. \ **rsync/scp**\ and \ **ssh**\ must
be installed and configured on the service nodes.
For hierarchy, this optionally can be done before syncing the files
to the nodes with the -F flag. If the -f flag is not used, then
the -F flag will sync the servicenodes before the nodes automatically.
to the nodes with the \ **-F**\ flag. If the \ **-f**\ flag is not used, then
the \ **-F**\ flag will sync the service nodes before the nodes automatically.
When installing nodes in a hierarchical cluster, this flag should be
used to sync the service nodes before the install, since the files will
be sync'd from the service node by the syncfiles postscript during the
be synced from the service node by the \ **syncfiles**\ postscript during the
install.
The function is not supported for NFS-based statelite installations.
For statelite installations to sync files, you should use the
read-only option for files/directories listed in
litefile table with source location specified in the litetree table.
\ **litefile**\ table with source location specified in the \ **litetree**\ table.
[\ **-r | -**\ **-node-rcp**\ [\ *full_path_to_remote_copy_command*\ ]]
[\ **-r | -**\ **-node-rcp**\ [\ *node_remote_copy_command*\ ]]
Specifies the full path of the remote copy command used for syncing files to node targets, such as "/usr/bin/rsync" or "/usr/bin/scp". If not specified, rsync will be used by default.
Specifies the full path of the remote copy command used for syncing files to node targets, such as \ **/usr/bin/rsync**\ or \ **/usr/bin/scp**\ . If not specified, \ **rsync**\ will be used by default.
Notice: The synclist for "-r /usr/bin/scp" has some differences with "-r /usr/bin/rsync":
Note: The synclist processing for \ **-r /usr/bin/scp**\ has some differences with \ **-r /usr/bin/rsync**\ :
1) the \`\`EXECUTE\`\` clause is not supported in "-r /usr/bin/scp"
1) the \ **EXECUTE**\ clause in synclist file is not supported with \ **-r /usr/bin/scp**\ flag
2) if the destination directory specified in synclist is an existing file on target node, "updatenode -r /usr/bin/scp" will fail with \`\`scp: <destination directory>: Not a directory\`\`
2) if the destination directory specified in synclist file is an existing file on target node, \ **updatenode -r /usr/bin/scp**\ will fail with "scp: <destination directory>: Not a directory"
3) if the destination file specified in synclist is an existing directory on target node, "updatenode -r /usr/bin/scp" will fail with \`\`scp: <destination file>: Is a directory\`\`
3) if the destination file specified in synclist file is an existing directory on target node, \ **updatenode -r /usr/bin/scp**\ will fail with "scp: <destination file>: Is a directory"
@ -461,8 +459,8 @@ OPTIONS
\ **-P|-**\ **-scripts**\
Specifies that postscripts and postbootscripts should be run on the nodes.
updatenode -P syncfiles is not supported. The syncfiles postscript can only
be run during install. You should use updatenode <noderange> -F instead.
File sync with \ **updatenode -P syncfiles**\ is not supported. The \ **syncfiles**\ postscript can only
be run during install. You should use \ **updatenode -F**\ instead.
@ -546,14 +544,14 @@ EXAMPLES
3. Running updatenode -P with the syncfiles postscript is not supported. You should use updatenode -F instead.
3. Running \ **updatenode -P**\ with the \ **syncfiles**\ postscript is not supported. You should use \ **updatenode -F**\ instead.
Do not run:
.. code-block:: perl
updatenode clstrno1 -P syncfiles
updatenode clstrn01 -P syncfiles
Run:

325
docs/source/guides/admin-guides/references/man1/xdcp.1.rst
View File

@ -11,7 +11,7 @@ xdcp.1
************
\ **xdcp**\ - Concurrently copies files to or from multiple nodes. In addition, provides an option to use rsync to update the files on the nodes, or to an installation image on the local node.
\ **xdcp**\ - Concurrently copies files to or from multiple nodes. In addition, provides an option to use \ **rsync**\ to update the files on the managed nodes, or to an installation image on the local node.
****************
@ -19,13 +19,13 @@ xdcp.1
****************
\ **xdcp**\ \ *noderange*\ [[\ **-B**\ | \ **-**\ **-bypass**\ ] [\ **-f**\ \ *fanout*\ ] [\ **-L**\ ] [\ **-l**\ \ *userID*\ ] [\ **-o**\ \ *node_options*\ ] [\ **-p**\ ] [\ **-P**\ ] [\ **-r**\ \ *node_remote_shell*\ ] [\ **-R**\ ] [\ **-t**\ \ *timeout*\ ] [\ **-T**\ ] [\ **-v**\ ] [\ **-q**\ ] [\ **-X**\ \ *env_list*\ ] \ *sourcefile.... targetpath*\
\ **xdcp**\ \ *noderange*\ [[\ **-B**\ | \ **-**\ **-bypass**\ ] [\ **-f**\ \ *fanout*\ ] [\ **-L**\ ] [\ **-l**\ \ *userID*\ ] [\ **-o**\ \ *node_options*\ ] [\ **-p**\ ] [\ **-P**\ ] [\ **-r**\ \ *node remote copy command] [\ \*\*-R\*\*\ ] [\ \*\*-t\*\*\ \ \*timeout\*\ ] [\ \*\*-T\*\*\ ] [\ \*\*-v\*\*\ ] [\ \*\*-q\*\*\ ] [\ \*\*-X\*\*\ \ \*env_list\*\ ] \ \*sourcefile.... targetpath\*\ *\
\ **xdcp**\ \ *noderange*\ [\ **-F**\ \ *rsync input file*\ ]
\ **xdcp**\ \ *noderange*\ [\ **-F**\ Irsynclist input file>] [\ **-r**\ \ *node remote copy command*\ ]
\ **xdcp**\ \ *computenoderange*\ [\ **-s**\ \ **-F**\ \ *rsync input file*\ ]
\ **xdcp**\ \ *computenoderange*\ [\ **-s**\ \ **-F**\ \ *synclist input file*\ ] [\ **-r**\ \ *node remote copy command*\ ]
\ **xdcp**\ [\ **-i**\ \ *path to install image*\ ] [\ **-F**\ \ *rsync input file*\ ]
\ **xdcp**\ [\ **-i**\ \ *install image*\ ] [\ **-F**\ \ *synclist input file*\ ] [\ **-r**\ \ *node remote copy command*\ ]
\ **xdcp**\ [\ **-h**\ | \ **-V**\ | \ **-q**\ ]
@ -36,33 +36,32 @@ xdcp.1
The \ **xdcp**\ command concurrently copies files to or from remote target
nodes. The command issues a remote copy command for each node or device specified. When files are pulled from a target, they are placed into the target_path with the name of the
remote node or device appended to the copied source_file name. The
/usr/bin/rcp command is the model for syntax and security.
If using hierarchy, then xdcp runs on the service node that is servicing the compute node. The file will first be copied to the path defined in the site table, SNsyncfiledir attribute, or the default path /var/xcat/syncfiles on the service node, if the attribute is not defined. The -P flag will not automatically copy
nodes. The command issues a remote copy command for each node or device specified. When files are pulled from a target, they are placed into the \ *targetpath*\ with the name of the
remote node or device appended to the copied \ *sourcefile*\ name. The
\ **/usr/bin/rcp**\ command is the model for syntax and security.
If using hierarchy, then \ **xdcp**\ runs on the service node that is servicing the compute node. The file will first be copied to the path defined in the site table, \ **SNsyncfiledir**\ attribute, or the default path \ **/var/xcat/syncfiles**\ on the service node, if the attribute is not defined. The \ **-P**\ flag will not automatically copy
the files from the compute node to the Management node, hierarchically. There
is a two step process, see \ **-P**\ flag.
If the Management Node is target node, it must be defined in the xCAT database with nodetype=mn. When the \ **xdcp**\ command runs the Management Node as the target, it does not use remote commands but uses the local OS copy (\ **cp**\ ) command.
If the Management Node is target node, it must be defined in the xCAT database with \ **nodetype=mn**\ . When the \ **xdcp**\ command runs with the Management Node as the target, it does not use remote commands but uses the local OS copy (\ **cp**\ ) command.
\ **REMOTE**\ \ **USER**\ :
A user_ID can be specified for the remote copy command. Remote user
specification is identical for the \ **xdcp**\ and \ **xdsh**\ commands. See the \ **xdsh**\
command for more information.
A user_ID can be specified for the remote copy command. Remote user
specification is identical for the \ **xdcp**\ and \ **xdsh**\ commands.
See the \ **xdsh**\ command for more information.
\ **REMOTE**\ \ **COMMAND**\ \ **COPY**\ :
The \ **xdcp**\ command uses a configurable remote copy command to execute
remote copies on remote targets. Support is explicitly provided for
Remote Shell rcp command, the OpenSSH scp command and the
/usr/bin/rsync command.
Remote Shell \ **rcp**\ command, the OpenSSH \ **scp**\ command and the
\ **/usr/bin/rsync**\ command.
For node targets, the remote copy command is determined by the follow-
ing order of precedence:
For node targets, the remote copy command is determined by the following order of precedence:
1. The \ **-r**\ flag.
2. The \ **/usr/bin/scp**\ command.
2. The \ **/usr/bin/rsync**\ command.
\ **COMMAND**\ \ **EXECUTIONS**\ :
@ -75,10 +74,10 @@ appropriate.
A timeout value for remote copy command execution can be specified with
the \ **-t**\ flag or DSH_TIMEOUT environment variable. If any remote target
does not respond within the timeout value, the xdcp command displays an
does not respond within the timeout value, the \ **xdcp**\ command displays an
error message and exits.
The \ **-T**\ flag provides diagnostic trace information for dcp command execution. Default settings and the actual remote copy commands that are executed to the remote targets are displayed.
The \ **-T**\ flag provides diagnostic trace information for \ **xdcp**\ command execution. Default settings and the actual remote copy commands that are executed to the remote targets are displayed.
The \ **xdcp**\ command can be executed silently using the \ **-Q**\ flag; no target
standard output or standard error is displayed.
@ -94,170 +93,45 @@ standard output or standard error is displayed.
Specifies the complete path for the file to be copied to or
from the target. Multiple files can be specified. When used
with the -R flag, only a single directory can be specified.
When used with the -P flag, only a single file can be specified.
with the \ **-R**\ flag, only a single directory can be specified.
When used with the \ **-P**\ flag, only a single file can be specified.
\ *targetpath*\
If one source_file file, then it specifies the file to copy the source_file
file to on the target. If multiple source_file files, it specifies
the directory to copy the source_file files to on the target.
If the -P flag is specified, the target_path is the local host location
If one source file, then it specifies the file to copy the source
file to on the target. If multiple source files, it specifies
the directory to copy the source files to on the target.
If the \ **-P**\ flag is specified, the \ *targetpath*\ is the local host location
for the copied files. The remote file directory structure is recreated
under target_path and the remote target name is appended
to the copied source_file name in the target_path directory.
Note: the targetpath directory must exist.
under \ *targetpath*\ and the remote target name is appended
to the copied \ *sourcefile*\ name in the \ *targetpath*\ directory.
Note: the \ *targetpath*\ directory must exist.
\ **-B | -**\ **-bypass**\
Runs in bypass mode, use if the xcatd daemon is hung.
Runs in bypass mode, use if the \ **xcatd**\ daemon is not responding.
\ **-f | -**\ **-fanout**\ \ *fanout_value*\
Specifies a fanout value for the maximum number of concur-
rently executing remote shell processes. Serial execution
Specifies a fanout value for the maximum number of concurrently executing remote shell processes. Serial execution
can be specified by indicating a fanout value of \ **1**\ .
If \ **-f**\ is not specified, a default fanout value of \ **64**\ is used.
\ **-F | -**\ **-File**\ \ *rsync input file*\
\ **-F | -**\ **-File**\ \ *synclist input file*\
Specifies the path to the file that will be used to
build the \ **rsync**\ command.
The format of the input file is as follows, each line contains:
The format of the input file is described here: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_synclist_file.html>
.. code-block:: perl
<path to source file1> <path to source file2> ... -> < path to destination file/directory>
or
.. code-block:: perl
<path to source file> -> <path to destination file>
or
.. code-block:: perl
<path to source file> -> <path to destination directory ( must end in /)>
For example:
.. code-block:: perl
/etc/password /etc/hosts -> /etc
/tmp/file2 -> /tmp/file2
/tmp/file2 -> /tmp/
/tmp/filex -> /tmp/source/filey
/etc/* -> /etc/
\ **Running postscripts after files are sync'd to the nodes**\ :
After you define the files to rsync, you can add an \ **EXECUTE:**\ clause in the synclist file. The \ **EXECUTE:**\ clause will list all the postscripts that you would like to run after the files are sync'd to the node.
The postscript file must be of the form \ **filename.post**\ , where the <filename>
is the <filename> is the from <filename>, reside in the same
directory as \ **filename**\ , and be executable.
If the file \ **filename**\ is rsync'd to the node, then the \ **filename.post**\
will automatically be run on the node.
If the file \ **filename**\ is not updated on the node, the \ **filename.post**\ will not be run.
Putting the \ **filename.post**\ in the file list to rsync to the node is required
for hierarchical clusters. It is optional for non-hierarchical clusters.
Another option is the \ **EXECUTEALWAYS:**\ clause in the synclist file. The \ **EXECUTEALWAYS:**\ will list all the postscripts that you would like to run after the files are sync'd to the nodes. These scripts will run whether or not any files are sync'd to the nodes. The scripts have no special format, but must contain the fully qualified path.
The scripts must be also added to the file list to rsync to the node for hierarchical clusters. It is optional for non-hierarchical clusters.
For example, your rsynclist file may look like this:
.. code-block:: perl
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
If /tmp/file2 and /tmp/file3 update /tmp/file2 and /tmp/filex on the node, then the postscripts /tmp/file2.post and /tmp/file3.post are automatically run on
the node. /tmp/myscript will always be run on the node.
Another option is the \ **APPEND:**\ clause in the synclist file. The \ **APPEND:**\ clause is used to append the contents of the input file to an existing file on the node. The file to append \ **must**\ already exist on the node and not be part of the synclist that contains the \ **APPEND:**\ clause.
For example, your rsynclist file may look like this:
.. code-block:: perl
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
APPEND:
/etc/myappenddir/appendfile -> /etc/mysetup/setup
/etc/myappenddir/appendfile2 -> /etc/mysetup/setup2
When you use the append script, the file (left) of the arrow is appended to the file right of the arrow. In this example, /etc/myappenddir/appendfile is appended to /etc/mysetup/setup file, which must already exist on the node. The /opt/xcat/share/xcat/scripts/xdcpappend.sh is used to accomplish this.
Another option is the \ **MERGE:**\ clause in the synclist file. The \ **MERGE:**\ clause is used to append the contents of the input file to /etc/passwd, /etc/group, or /etc/shadow on a Linux node. It is only supported for those files and only on Linux. You must not use both the APPEND and MERGE funcion for these three files. The processing could end up not creating the file you desire. The MERGE function is the preferred method, because APPEND only adds to the file. MERGE will add to the file but also insure there are no duplicate entries.
For example, your rsynclist file may look like this:
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
APPEND:
/custom/mypasswd -> /etc/passwd
/custom/mygroups -> /etc/group
/custom/myshadow -> /etc/shadow
Note: no order can be assumed by the order that the EXECUTE,EXECUTEALWAYS and APPEND clause fall in the synclist file.
For more information on syncing files to node, read Sync-ing_Config_Files_to_Nodes
On Linux rsync always uses ssh remoteshell. On AIX, ssh or rsh is used depending on the site.useSSHonAIX attribute.
On Linux \ **rsync**\ always uses ssh remoteshell. On AIX, \ **ssh**\ or \ **rsh**\ is used depending on the \ **site.useSSHonAIX**\ table attribute.
@ -269,7 +143,7 @@ standard output or standard error is displayed.
\ **-i | -**\ **-rootimg**\ \ *install image*\
Specifies the path to the install image on the local Linux node.
Specifies the path to the install image on the local Linux node.
@ -277,7 +151,7 @@ standard output or standard error is displayed.
Specifies options to pass to the remote shell command for
node targets. The options must be specified within double
quotation marks ("") to distinguish them from \ **xdsh**\ options.
quotation marks ("") to distinguish them from \ **xdcp**\ options.
@ -291,14 +165,14 @@ standard output or standard error is displayed.
\ **-P | -**\ **-pull**\
Pulls (copies) the files from the targets and places them in
the target_path directory on the local host. The target_path
the \ *targetpath*\ directory on the local host. The \ *targetpath*\
must be a directory. Files pulled from remote machines have
._target appended to the file name to distinguish between
them. When the \ **-P**\ flag is used with the \ **-R**\ flag, ._target is
\ **._target**\ appended to the file name to distinguish between
them. When the \ **-P**\ flag is used with the \ **-R**\ flag, \ **._target**\ is
appended to the directory. Only one file per invocation of the
xdcp pull command can be pulled from the specified targets.
Hierarchy is not automatically support yet. You must first pull
the file to the Service Node and then pull the file to the Management
\ **xdcp**\ pull command can be pulled from the specified targets.
In hierarchy, you must first pull
the file to the service node and then pull the file to the management
node.
@ -313,10 +187,17 @@ standard output or standard error is displayed.
\ **-r | -**\ **-node-rcp**\ \ *node_remote_copy*\
\ **-r | -**\ **-node-rcp**\ \ *node remote copy command*\
Specifies the full path of the remote copy command used
for remote command execution on node targets.
Specifies the full path of the remote copy command used for syncing files to node targets, such as \ **/usr/bin/rsync**\ or \ **/usr/bin/scp**\ . If not specified, \ **rsync**\ will be used by default.
Note: The synclist processing for \ **-r /usr/bin/scp**\ has some differences with \ **-r /usr/bin/rsync**\ :
1) the \ **EXECUTE**\ clause in synclist file is not supported with \ **-r /usr/bin/scp**\ flag
2) if the destination directory specified in synclist file is an existing file on target node, \ **xdcp -r /usr/bin/scp**\ will fail with "scp: <destination directory>: Not a directory"
3) if the destination file specified in synclist file is an existing directory on target node, \ **xdcp -r /usr/bin/scp**\ will fail with "scp: <destination file>: Is a directory"
@ -325,8 +206,7 @@ standard output or standard error is displayed.
Recursively copies files from a local directory to the remote
targets, or when specified with the \ **-P**\ flag, recursively pulls
(copies) files from a remote directory to the local host. A
single source directory can be specified using the source_file
parameter.
single source directory can be specified using the \ *sourcefile*\ parameter.
@ -334,8 +214,8 @@ standard output or standard error is displayed.
Will only sync the files listed in the synclist (\ **-F**\ ), to the service
nodes for the input compute node list. The files will be placed in the
directory defined by the site.SNsyncfiledir attribute, or the default
/var/xcat/syncfiles directory.
directory defined by the \ **site.SNsyncfiledir**\ table attribute, or the default
\ **/var/xcat/syncfiles**\ directory.
@ -447,9 +327,8 @@ standard output or standard error is displayed.
\ **DSH_TIMEOUT**\
Specifies the time, in seconds, to wait for output from
each remote target. This variable is overridden by the \ **-t**\
flag.
Specifies the time, in seconds, to wait for output from
each remote target. This variable is overridden by the \ **-t**\ flag.
@ -463,13 +342,12 @@ Exit values for each remote copy command execution are displayed in
messages from the xdcp command, if the remote copy command exit value is
non-zero. A non-zero return code from a remote copy command indicates
that an error was encountered during the remote copy. If a remote copy
command encounters an error, execution of the remote copy on that tar-
get is bypassed.
command encounters an error, execution of the remote copy on that target is bypassed.
The xdcp command exit code is 0, if the xdcp command executed without
The \ **xdcp**\ command exit code is 0, if the \ **xdcp**\ command executed without
errors and all remote copy commands finished with exit codes of 0. If
internal xdcp errors occur or the remote copy commands do not complete
successfully, the xdcp command exit value is greater than 0.
internal \ **xdcp**\ errors occur or the remote copy commands do not complete
successfully, the \ **xdcp**\ command exit value is greater than 0.
****************
@ -530,7 +408,7 @@ host as /var/log._target, enter:
3. To copy /localnode/smallfile and /tmp/bigfile to /tmp on node1
3. To copy /localnode/smallfile and /tmp/bigfile to B/tmp on node1
using rsync and input -t flag to rsync, enter:
@ -587,15 +465,23 @@ from the local host to node1 in the cluster, enter:
8. To rsync the /etc/hosts file to your compute nodes:
Create a rsync file /tmp/myrsync, with this line:
First create a syncfile /tmp/myrsync, with this line:
.. code-block:: perl
/etc/hosts -> /etc/hosts
/etc/hosts -> /etc/hosts
or
/etc/hosts -> /etc/ (last / is required)
Run:
.. code-block:: perl
/etc/hosts -> /etc/ (last / is required)
Then run:
.. code-block:: perl
@ -607,11 +493,15 @@ from the local host to node1 in the cluster, enter:
9. To rsync all the files in /home/mikev to the compute nodes:
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/home/mikev/\* -> /home/mikev/ (last / is required)
Run:
.. code-block:: perl
/home/mikev/* -> /home/mikev/ (last / is required)
Then run:
.. code-block:: perl
@ -621,18 +511,25 @@ from the local host to node1 in the cluster, enter:
10. To rsync to the compute nodes, using service nodes, the command will first
rsync the files to the /var/xcat/syncfiles directory on the service nodes and then rsync the files from that directory to the compute nodes. The /var/xcat/syncfiles default directory on the service nodes, can be changed by putting a directory value in the site table SNsyncfiledir attribute.
10. To rsync to the compute nodes, using service nodes:
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
.. code-block:: perl
/etc/hosts /etc/passwd -> /etc
/etc/hosts /etc/passwd -> /etc
or
/etc/hosts /etc/passwd -> /etc/
Run:
.. code-block:: perl
/etc/hosts /etc/passwd -> /etc/
Then run:
.. code-block:: perl
@ -640,18 +537,20 @@ rsync the files to the /var/xcat/syncfiles directory on the service nodes and t
xdcp compute -F /tmp/myrsync
to update the Compute Nodes
11. To rsync to the service nodes in preparation for rsyncing the compute nodes
during an install from the service node.
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/etc/hosts /etc/passwd -> /etc
Run:
.. code-block:: perl
/etc/hosts /etc/passwd -> /etc
Then run:
.. code-block:: perl
@ -659,19 +558,21 @@ during an install from the service node.
xdcp compute -s -F /tmp/myrsync
to sync the service node for compute
12. To rsync the /etc/file1 and file2 to your compute nodes and rename to filex and filey:
Create a rsync file /tmp/myrsync, with these line:
First create a rsync file /tmp/myrsync, with these line:
/etc/file1 -> /etc/filex
/etc/file2 -> /etc/filey
.. code-block:: perl
Run:
/etc/file1 -> /etc/filex
/etc/file2 -> /etc/filey
Then run:
.. code-block:: perl
@ -685,11 +586,15 @@ during an install from the service node.
13. To rsync files in the Linux image at /install/netboot/fedora9/x86_64/compute/rootimg on the MN:
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/etc/hosts /etc/passwd -> /etc
Run:
.. code-block:: perl
/etc/hosts /etc/passwd -> /etc
Then run:
.. code-block:: perl

7
docs/source/guides/admin-guides/references/man5/site.5.rst
View File

@ -135,6 +135,11 @@ site Attributes:
service nodes will ignore this value and always be configured to forward
to the management node.
dnsforwardmode: (first or only or no). This is to set forward value in named.conf options section.
"first": causes DNS requests to be forwarded before an attempt is made to resolve them via the root name servers.
"only": all requests are forwarded and none sent to the root name servers.
"no": no request will be forwarded. This is the default value if not specified.
emptyzonesenable: (yes or no). This is to set empty-zones-enable value in named.conf options section.
master: The hostname of the xCAT management node, as known by the nodes.
@ -401,7 +406,7 @@ site Attributes:
dbtracelevel: The trace level for the database access log. To activate this setting, please.
restart xcatd or send HUP signal to the 'xcatd: DB Access' process, Like: .
ps -ef | grep 'xcatd: DB Access' | grep -v grep | awk '{print $2}' | xargs kill -HUP
pkill -f -HUP 'xcatd: DB Access'
Currrent support values:
0: disable the trace log for db
1: trace the calls of database subroutines

10
perl-xCAT/xCAT/DSHCLI.pm
View File

@ -5936,6 +5936,11 @@ sub run_rsync_postscripts
# return from rsync is tmp/file1 not /tmp/file1
substr($tmppostfile, 0, 1) = "";
# now remove .post from the postscript file for the compare
# with the returned file name
my($tp,$post) = split(/\.post/,$tmppostfile);
$tmppostfile = $tp;
foreach my $line (@rsync_output) {
my ($hostname, $ps) = split(/: /, $line);
chomp $ps;
@ -5948,7 +5953,10 @@ sub run_rsync_postscripts
}
next;
}
if ($tmppostfile eq $ps) {
#the $postsfile <file>.post will be run if:
# the <file> is updated, or
if ($ps eq $tmppostfile ) {
# build xdsh queue
# build host and all scripts to execute

6
perl-xCAT/xCAT/Schema.pm
View File

@ -1059,6 +1059,10 @@ passed as argument rather than by table value',
" requests it does not know to these servers. Note that the DNS servers on the\n" .
" service nodes will ignore this value and always be configured to forward \n" .
" to the management node.\n\n" .
" dnsforwardmode: (first or only or no). This is to set forward value in named.conf options section. \n" .
" \"first\": causes DNS requests to be forwarded before an attempt is made to resolve them via the root name servers. \n" .
" \"only\": all requests are forwarded and none sent to the root name servers.\n".
" \"no\": no request will be forwarded. This is the default value if not specified. \n\n" .
" emptyzonesenable: (yes or no). This is to set empty-zones-enable value in named.conf options section. \n\n" .
" master: The hostname of the xCAT management node, as known by the nodes.\n\n" .
" nameservers: A comma delimited list of DNS servers that each node in the cluster should\n" .
@ -1262,7 +1266,7 @@ passed as argument rather than by table value',
" delimiter, to specify delimiter for those columns as format of 'column:delimiter'.\n\n" .
" dbtracelevel: The trace level for the database access log. To activate this setting, please. \n".
" restart xcatd or send HUP signal to the 'xcatd: DB Access' process, Like: .\n".
" ps -ef | grep 'xcatd: DB Access' | grep -v grep | awk '{print \$2}' | xargs kill -HUP \n".
" pkill -f -HUP 'xcatd: DB Access' \n".
" Currrent support values: \n" .
" 0: disable the trace log for db \n" .
" 1: trace the calls of database subroutines \n" .

38
xCAT-client/pods/man1/updatenode.1.pod
View File

@ -18,7 +18,7 @@ B<updatenode> [B<-h>|B<--help>] [B<-v>|B<--version>]
=head1 DESCRIPTION
The updatenode command is run on the xCAT management node and can be used
The B<updatenode> command is run on the xCAT management node and can be used
to perform the following node updates:
=over 3
@ -38,9 +38,9 @@ Update the ca and credentials for the service nodes.
=back
The default behavior when no options are input to updatenode will be to run
The default behavior when no options are input to B<updatenode> will be to run
the following options B<-S>, B<-P> and B<-F> options in this order.
If you wish to limit updatenode to specific
If you wish to limit B<updatenode> to specific
actions you can use combinations of the B<-S>, B<-P>, and B<-F> flags.
For example, If you just want to synchronize configuration file you could
@ -55,7 +55,7 @@ The flag B<-f> (B<--snsync>) can NOT be used together with B<-S>, B<-P>, and B<-
Note: In a large cluster environment the updating of nodes in an ad hoc
manner can quickly get out of hand, leaving the system administrator with
a very confusing environment to deal with. The updatenode command is
a very confusing environment to deal with. The B<updatenode> command is
designed to encourage users to handle cluster updates in a manner that
is recorded and easily repeatable.
@ -72,14 +72,14 @@ Create a synclist file.
Indicate the location of the synclist file.
=item *
Run the updatenode command to update the nodes.
Run the B<updatenode> command to update the nodes.
=back
Files may be distributed and synchronized for both diskless and
diskful nodes. Syncing files to NFS-based statelite nodes is not supported.
More information on using the synchronization file function is in the following doc: Using_Updatenode.
More information on using the synchronization file function is in the following document: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_updatenode.html>
=head3 Create the synclist file
@ -88,9 +88,7 @@ where the files should be synced to. In the synclist file, each
line is an entry which describes the location of the source files
and the destination location for the files on the target node.
For more information on creating your synclist files and where to put them, read:
Sync-ing_Config_Files_to_Nodes
For more information on creating your synclist files and where to put them, read here: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_synclist_file.html>
=head3 Run updatenode to synchronize the files
@ -289,12 +287,12 @@ Used to specify a source directory other than the standard lpp_source directory
=item B<-F|--sync>
Specifies that file synchronization should be
performed on the nodes. rsync/scp and ssh must
performed on the nodes. B<rsync/scp> and B<ssh> must
be installed and configured on the nodes.
The function is not supported for NFS-based statelite installations.
For NFS-based statelite installations to sync files, you should use the
read-only option for files/directories listed in
litefile table with source location specified in the litetree table.
B<litefile> table with source location specified in the B<litetree> table.
=item B<-f|--snsync>
@ -302,19 +300,19 @@ litefile table with source location specified in the litetree table.
Specifies that file synchronization should be
performed to the service nodes that service the
nodes in the noderange. This updates the service
nodes with the data to sync to the nodes. rsync/scp and ssh must
nodes with the data to sync to the nodes. B<rsync/scp> and B<ssh> must
be installed and configured on the service nodes.
For hierarchy, this optionally can be done before syncing the files
to the nodes with the -F flag. If the -f flag is not used, then
the -F flag will sync the servicenodes before the nodes automatically.
to the nodes with the B<-F> flag. If the B<-f> flag is not used, then
the B<-F> flag will sync the service nodes before the nodes automatically.
When installing nodes in a hierarchical cluster, this flag should be
used to sync the service nodes before the install, since the files will
be sync'd from the service node by the syncfiles postscript during the
be synced from the service node by the B<syncfiles> postscript during the
install.
The function is not supported for NFS-based statelite installations.
For statelite installations to sync files, you should use the
read-only option for files/directories listed in
litefile table with source location specified in the litetree table.
B<litefile> table with source location specified in the B<litetree> table.
=item [B<-r>|B<--node-rcp> [I<full_path_to_remote_copy_command>]]
@ -359,8 +357,8 @@ See the document Granting_Users_xCAT_privileges for required xcat/sudo setup.
=item B<-P|--scripts>
Specifies that postscripts and postbootscripts should be run on the nodes.
updatenode -P syncfiles is not supported. The syncfiles postscript can only
be run during install. You should use updatenode <noderange> -F instead.
File sync with B<updatenode -P syncfiles> is not supported. The B<syncfiles> postscript can only
be run during install. You should use B<updatenode -F> instead.
=item B<-S|--sw>
@ -417,11 +415,11 @@ To run postscripts,postbootscripts and file synchronization only on the node "cl
updatenode clstrn01 -F -P
=item 3.
Running updatenode -P with the syncfiles postscript is not supported. You should use updatenode -F instead.
Running B<updatenode -P> with the B<syncfiles> postscript is not supported. You should use B<updatenode -F> instead.
Do not run:
updatenode clstrno1 -P syncfiles
updatenode clstrn01 -P syncfiles
Run:

248
xCAT-client/pods/man1/xdcp.1.pod
View File

@ -1,6 +1,6 @@
=head1 B<NAME>
B<xdcp> - Concurrently copies files to or from multiple nodes. In addition, provides an option to use rsync to update the files on the nodes, or to an installation image on the local node.
B<xdcp> - Concurrently copies files to or from multiple nodes. In addition, provides an option to use B<rsync> to update the files on the managed nodes, or to an installation image on the local node.
=head1 B<SYNOPSIS>
@ -11,7 +11,7 @@ B<xdcp> I<noderange> [B<-F> I<rsync input file>]
B<xdcp> I<computenoderange> [B<-s> B<-F> I<rsync input file>]
B<xdcp> [B<-i> I<path to install image>] [B<-F> I<rsync input file>]
B<xdcp> [B<-i> I<install image>] [B<-F> I<rsync input file>]
B<xdcp> [B<-h> | B<-V> | B<-q>]
@ -20,29 +20,28 @@ B<xdcp> [B<-h> | B<-V> | B<-q>]
=head1 B<DESCRIPTION>
The B<xdcp> command concurrently copies files to or from remote target
nodes. The command issues a remote copy command for each node or device specified. When files are pulled from a target, they are placed into the target_path with the name of the
remote node or device appended to the copied source_file name. The
/usr/bin/rcp command is the model for syntax and security.
If using hierarchy, then xdcp runs on the service node that is servicing the compute node. The file will first be copied to the path defined in the site table, SNsyncfiledir attribute, or the default path /var/xcat/syncfiles on the service node, if the attribute is not defined. The -P flag will not automatically copy
nodes. The command issues a remote copy command for each node or device specified. When files are pulled from a target, they are placed into the I<targetpath> with the name of the
remote node or device appended to the copied I<sourcefile> name. The
B</usr/bin/rcp> command is the model for syntax and security.
If using hierarchy, then B<xdcp> runs on the service node that is servicing the compute node. The file will first be copied to the path defined in the site table, B<SNsyncfiledir> attribute, or the default path B</var/xcat/syncfiles> on the service node, if the attribute is not defined. The B<-P> flag will not automatically copy
the files from the compute node to the Management node, hierarchically. There
is a two step process, see B<-P> flag.
If the Management Node is target node, it must be defined in the xCAT database with nodetype=mn. When the B<xdcp> command runs the Management Node as the target, it does not use remote commands but uses the local OS copy (B<cp>) command.
If the Management Node is target node, it must be defined in the xCAT database with B<nodetype=mn>. When the B<xdcp> command runs with the Management Node as the target, it does not use remote commands but uses the local OS copy (B<cp>) command.
B<REMOTE> B<USER>:
A user_ID can be specified for the remote copy command. Remote user
specification is identical for the B<xdcp> and B<xdsh> commands. See the B<xdsh>
command for more information.
A user_ID can be specified for the remote copy command. Remote user
specification is identical for the B<xdcp> and B<xdsh> commands.
See the B<xdsh> command for more information.
B<REMOTE> B<COMMAND> B<COPY>:
The B<xdcp> command uses a configurable remote copy command to execute
remote copies on remote targets. Support is explicitly provided for
Remote Shell rcp command, the OpenSSH scp command and the
/usr/bin/rsync command.
Remote Shell B<rcp> command, the OpenSSH B<scp> command and the
B</usr/bin/rsync> command.
For node targets, the remote copy command is determined by the follow-
ing order of precedence:
For node targets, the remote copy command is determined by the following order of precedence:
1. The B<-r> flag.
@ -60,10 +59,10 @@ appropriate.
A timeout value for remote copy command execution can be specified with
the B<-t> flag or DSH_TIMEOUT environment variable. If any remote target
does not respond within the timeout value, the xdcp command displays an
does not respond within the timeout value, the B<xdcp> command displays an
error message and exits.
The B<-T> flag provides diagnostic trace information for dcp command execution. Default settings and the actual remote copy commands that are executed to the remote targets are displayed.
The B<-T> flag provides diagnostic trace information for B<xdcp> command execution. Default settings and the actual remote copy commands that are executed to the remote targets are displayed.
The B<xdcp> command can be executed silently using the B<-Q> flag; no target
standard output or standard error is displayed.
@ -76,28 +75,27 @@ standard output or standard error is displayed.
Specifies the complete path for the file to be copied to or
from the target. Multiple files can be specified. When used
with the -R flag, only a single directory can be specified.
When used with the -P flag, only a single file can be specified.
with the B<-R> flag, only a single directory can be specified.
When used with the B<-P> flag, only a single file can be specified.
=item I<targetpath>
If one source_file file, then it specifies the file to copy the source_file
file to on the target. If multiple source_file files, it specifies
the directory to copy the source_file files to on the target.
If the -P flag is specified, the target_path is the local host location
If one source file, then it specifies the file to copy the source
file to on the target. If multiple source files, it specifies
the directory to copy the source files to on the target.
If the B<-P> flag is specified, the I<targetpath> is the local host location
for the copied files. The remote file directory structure is recreated
under target_path and the remote target name is appended
to the copied source_file name in the target_path directory.
Note: the targetpath directory must exist.
under I<targetpath> and the remote target name is appended
to the copied I<sourcefile> name in the I<targetpath> directory.
Note: the I<targetpath> directory must exist.
=item B<-B>|B<--bypass>
Runs in bypass mode, use if the xcatd daemon is hung.
Runs in bypass mode, use if the B<xcatd> daemon is not responding.
=item B<-f>|B<--fanout> I<fanout_value>
Specifies a fanout value for the maximum number of concur-
rently executing remote shell processes. Serial execution
Specifies a fanout value for the maximum number of concurrently executing remote shell processes. Serial execution
can be specified by indicating a fanout value of B<1>.
If B<-f> is not specified, a default fanout value of B<64> is used.
@ -105,110 +103,9 @@ If B<-f> is not specified, a default fanout value of B<64> is used.
Specifies the path to the file that will be used to
build the B<rsync> command.
The format of the input file is as follows, each line contains:
The format of the input file is described here: <https://xcat-docs.readthedocs.io/en/stable/guides/admin-guides/manage_clusters/common/deployment/syncfile/syncfile_synclist_file.html>
<path to source file1> <path to source file2> ... -> < path to destination file/directory>
or
<path to source file> -> <path to destination file>
or
<path to source file> -> <path to destination directory ( must end in /)>
For example:
/etc/password /etc/hosts -> /etc
/tmp/file2 -> /tmp/file2
/tmp/file2 -> /tmp/
/tmp/filex -> /tmp/source/filey
/etc/* -> /etc/
B<Running postscripts after files are sync'd to the nodes>:
After you define the files to rsync, you can add an B<EXECUTE:> clause in the synclist file. The B<EXECUTE:> clause will list all the postscripts that you would like to run after the files are sync'd to the node.
The postscript file must be of the form B<filename.post>, where the <filename>
is the <filename> is the from <filename>, reside in the same
directory as B<filename>, and be executable.
If the file B<filename> is rsync'd to the node, then the B<filename.post>
will automatically be run on the node.
If the file B<filename> is not updated on the node, the B<filename.post> will not be run.
Putting the B<filename.post> in the file list to rsync to the node is required
for hierarchical clusters. It is optional for non-hierarchical clusters.
Another option is the B<EXECUTEALWAYS:> clause in the synclist file. The B<EXECUTEALWAYS:> will list all the postscripts that you would like to run after the files are sync'd to the nodes. These scripts will run whether or not any files are sync'd to the nodes. The scripts have no special format, but must contain the fully qualified path.
The scripts must be also added to the file list to rsync to the node for hierarchical clusters. It is optional for non-hierarchical clusters.
For example, your rsynclist file may look like this:
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
If /tmp/file2 and /tmp/file3 update /tmp/file2 and /tmp/filex on the node, then the postscripts /tmp/file2.post and /tmp/file3.post are automatically run on
the node. /tmp/myscript will always be run on the node.
Another option is the B<APPEND:> clause in the synclist file. The B<APPEND:> clause is used to append the contents of the input file to an existing file on the node. The file to append B<must> already exist on the node and not be part of the synclist that contains the B<APPEND:> clause.
For example, your rsynclist file may look like this:
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
APPEND:
/etc/myappenddir/appendfile -> /etc/mysetup/setup
/etc/myappenddir/appendfile2 -> /etc/mysetup/setup2
When you use the append script, the file (left) of the arrow is appended to the file right of the arrow. In this example, /etc/myappenddir/appendfile is appended to /etc/mysetup/setup file, which must already exist on the node. The /opt/xcat/share/xcat/scripts/xdcpappend.sh is used to accomplish this.
Another option is the B<MERGE:> clause in the synclist file. The B<MERGE:> clause is used to append the contents of the input file to /etc/passwd, /etc/group, or /etc/shadow on a Linux node. It is only supported for those files and only on Linux. You must not use both the APPEND and MERGE funcion for these three files. The processing could end up not creating the file you desire. The MERGE function is the preferred method, because APPEND only adds to the file. MERGE will add to the file but also insure there are no duplicate entries.
For example, your rsynclist file may look like this:
/tmp/share/file2 -> /tmp/file2
/tmp/share/file2.post -> /tmp/file2.post
/tmp/share/file3 -> /tmp/filex
/tmp/share/file3.post -> /tmp/file3.post
/tmp/myscript -> /tmp/myscript
# the below are postscripts
EXECUTE:
/tmp/share/file2.post
/tmp/share/file3.post
EXECUTEALWAYS:
/tmp/myscript
APPEND:
/custom/mypasswd -> /etc/passwd
/custom/mygroups -> /etc/group
/custom/myshadow -> /etc/shadow
Note: no order can be assumed by the order that the EXECUTE,EXECUTEALWAYS and APPEND clause fall in the synclist file.
For more information on syncing files to node, read Sync-ing_Config_Files_to_Nodes
On Linux rsync always uses ssh remoteshell. On AIX, ssh or rsh is used depending on the site.useSSHonAIX attribute.
On Linux B<rsync> always uses ssh remoteshell. On AIX, B<ssh> or B<rsh> is used depending on the B<site.useSSHonAIX> table attribute.
=item B<-h>|B<--help>
@ -218,15 +115,14 @@ Displays usage information.
=item B<-i>|B<--rootimg> I<install image>
Specifies the path to the install image on the local Linux node.
Specifies the path to the install image on the local Linux node.
=item B<-o>|B<--node-options> I<node_options>
Specifies options to pass to the remote shell command for
node targets. The options must be specified within double
quotation marks ("") to distinguish them from B<xdsh> options.
quotation marks ("") to distinguish them from B<xdcp> options.
=item B<-p>|B<--preserve>
@ -236,14 +132,14 @@ the configured remote copy command.
=item B<-P>|B<--pull>
Pulls (copies) the files from the targets and places them in
the target_path directory on the local host. The target_path
the I<targetpath> directory on the local host. The I<targetpath>
must be a directory. Files pulled from remote machines have
._target appended to the file name to distinguish between
them. When the B<-P> flag is used with the B<-R> flag, ._target is
B<._target> appended to the file name to distinguish between
them. When the B<-P> flag is used with the B<-R> flag, B<._target> is
appended to the directory. Only one file per invocation of the
xdcp pull command can be pulled from the specified targets.
Hierarchy is not automatically support yet. You must first pull
the file to the Service Node and then pull the file to the Management
B<xdcp> pull command can be pulled from the specified targets.
In hierarchy, you must first pull
the file to the service node and then pull the file to the management
node.
=item B<-q>|B<--show-config>
@ -266,16 +162,15 @@ for remote command execution on node targets.
Recursively copies files from a local directory to the remote
targets, or when specified with the B<-P> flag, recursively pulls
(copies) files from a remote directory to the local host. A
single source directory can be specified using the source_file
parameter.
single source directory can be specified using the I<sourcefile> parameter.
=item B<-s> I<synch service nodes>
Will only sync the files listed in the synclist (B<-F>), to the service
nodes for the input compute node list. The files will be placed in the
directory defined by the site.SNsyncfiledir attribute, or the default
/var/xcat/syncfiles directory.
directory defined by the B<site.SNsyncfiledir> table attribute, or the default
B</var/xcat/syncfiles> directory.
=item B<-t>|B<--timeout> I<timeout>
@ -361,9 +256,8 @@ variable is overridden by the B<-S> flag.
=item B<DSH_TIMEOUT>
Specifies the time, in seconds, to wait for output from
each remote target. This variable is overridden by the B<-t>
flag.
Specifies the time, in seconds, to wait for output from
each remote target. This variable is overridden by the B<-t> flag.
=back
@ -374,13 +268,12 @@ Exit values for each remote copy command execution are displayed in
messages from the xdcp command, if the remote copy command exit value is
non-zero. A non-zero return code from a remote copy command indicates
that an error was encountered during the remote copy. If a remote copy
command encounters an error, execution of the remote copy on that tar-
get is bypassed.
command encounters an error, execution of the remote copy on that target is bypassed.
The xdcp command exit code is 0, if the xdcp command executed without
The B<xdcp> command exit code is 0, if the B<xdcp> command executed without
errors and all remote copy commands finished with exit codes of 0. If
internal xdcp errors occur or the remote copy commands do not complete
successfully, the xdcp command exit value is greater than 0.
internal B<xdcp> errors occur or the remote copy commands do not complete
successfully, the B<xdcp> command exit value is greater than 0.
@ -424,7 +317,7 @@ host as /var/log._target, enter:
xdcp NodeGroup1 -f 12 -RP /var/log/testlogdir /var/log
=item 3.
To copy /localnode/smallfile and /tmp/bigfile to /tmp on node1
To copy /localnode/smallfile and /tmp/bigfile to B/tmp on node1
using rsync and input -t flag to rsync, enter:
xdcp node1 -r /usr/bin/rsync -o "-t" /localnode/smallfile /tmp/bigfile /tmp
@ -456,72 +349,67 @@ To copy the /etc/hosts file from node1 and node2 to the
=item 8.
To rsync the /etc/hosts file to your compute nodes:
Create a rsync file /tmp/myrsync, with this line:
First create a syncfile /tmp/myrsync, with this line:
/etc/hosts -> /etc/hosts
/etc/hosts -> /etc/hosts
or
/etc/hosts -> /etc/ (last / is required)
/etc/hosts -> /etc/ (last / is required)
Run:
Then run:
xdcp compute -F /tmp/myrsync
=item 9.
To rsync all the files in /home/mikev to the compute nodes:
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/home/mikev/* -> /home/mikev/ (last / is required)
/home/mikev/* -> /home/mikev/ (last / is required)
Run:
Then run:
xdcp compute -F /tmp/myrsync
=item 10.
To rsync to the compute nodes, using service nodes, the command will first
rsync the files to the /var/xcat/syncfiles directory on the service nodes and then rsync the files from that directory to the compute nodes. The /var/xcat/syncfiles default directory on the service nodes, can be changed by putting a directory value in the site table SNsyncfiledir attribute.
To rsync to the compute nodes, using service nodes:
First create a rsync file /tmp/myrsync, with this line:
Create a rsync file /tmp/myrsync, with this line:
/etc/hosts /etc/passwd -> /etc
/etc/hosts /etc/passwd -> /etc
or
/etc/hosts /etc/passwd -> /etc/
/etc/hosts /etc/passwd -> /etc/
Run:
Then run:
xdcp compute -F /tmp/myrsync
to update the Compute Nodes
=item 11.
To rsync to the service nodes in preparation for rsyncing the compute nodes
during an install from the service node.
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/etc/hosts /etc/passwd -> /etc
/etc/hosts /etc/passwd -> /etc
Run:
Then run:
xdcp compute -s -F /tmp/myrsync
to sync the service node for compute
=item 12.
To rsync the /etc/file1 and file2 to your compute nodes and rename to filex and filey:
Create a rsync file /tmp/myrsync, with these line:
First create a rsync file /tmp/myrsync, with these line:
/etc/file1 -> /etc/filex
/etc/file1 -> /etc/filex
/etc/file2 -> /etc/filey
/etc/file2 -> /etc/filey
Run:
Then run:
xdcp compute -F /tmp/myrsync
@ -530,11 +418,11 @@ to update the Compute Nodes
=item 13.
To rsync files in the Linux image at /install/netboot/fedora9/x86_64/compute/rootimg on the MN:
Create a rsync file /tmp/myrsync, with this line:
First create a rsync file /tmp/myrsync, with this line:
/etc/hosts /etc/passwd -> /etc
/etc/hosts /etc/passwd -> /etc
Run:
Then run:
xdcp -i /install/netboot/fedora9/x86_64/compute/rootimg -F /tmp/myrsync

55
xCAT-openbmc-py/lib/python/agent/hwctl/redfish_client.py
View File

@ -32,10 +32,6 @@ POWER_RESET_TYPE = {
'on' : 'ForceOn',
}
manager_reset_string = '#Manager.Reset'
system_reset_string = '#ComputerSystem.Reset'
reset_type_string = 'ResetType@Redfish.AllowableValues'
BOOTSOURCE_SET_STATE = {
"cd" : "Cd",
"def" : "None",
@ -55,6 +51,11 @@ BOOTSOURCE_GET_STATE = {
"Pxe" : "Network",
}
manager_reset_string = '#Manager.Reset'
system_reset_string = '#ComputerSystem.Reset'
reset_type_string = 'ResetType@Redfish.AllowableValues'
reset_action_string = '@Redfish.ActionInfo'
class RedfishRest(object):
headers = {'Content-Type': 'application/json'}
@ -101,7 +102,7 @@ class RedfishRest(object):
if data:
if cmd == 'login':
data = data.replace('"Password": "%s"' % self.password, '"Password": "xxxxxx"')
data = '-d \'%s\'' % data
data = '-d \'%s\'' % data
msg += '%s %s -v' % (url, data)
else:
msg += url
@ -156,7 +157,7 @@ class RedfishRest(object):
if 'Name' in data:
self._print_record_log('%s %s' % (code, data['Name']), cmd)
elif 'error' in data:
self._print_record_log('%s %s' % (code, data['error']['Message']), cmd)
self._print_record_log('%s %s' % (code, data['error']['message']), cmd)
return data
def login(self):
@ -170,7 +171,7 @@ class RedfishRest(object):
try:
return data['Members']
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
def get_bmc_state(self):
@ -180,7 +181,7 @@ class RedfishRest(object):
try:
return data['PowerState']
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
def get_chassis_power_state(self):
@ -190,7 +191,7 @@ class RedfishRest(object):
try:
return data['PowerState']
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
def get_systems_power_state(self):
@ -200,18 +201,24 @@ class RedfishRest(object):
try:
return data['PowerState']
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
def _get_bmc_actions(self):
members = self._get_members(MANAGER_URL)
target_url = members[0]['@odata.id']
data = self.request('GET', target_url, cmd='get_bmc_actions')
try:
actions = data['Actions'][manager_reset_string][reset_type_string]
target_url = data['Actions'][manager_reset_string]['target']
actions_dict = data['Actions'][manager_reset_string]
target_url = actions_dict['target']
if reset_action_string in actions_dict:
action_info = self.request('GET', actions_dict[reset_action_string], cmd='get_bmc_actions')
actions = action_info['Parameters'][0]['AllowableValues']
else:
actions = actions_dict[reset_type_string]
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
return (target_url, actions)
@ -219,7 +226,7 @@ class RedfishRest(object):
target_url, actions = self._get_bmc_actions()
if BMC_RESET_TYPE not in actions:
raise SelfClientException('Unsupported option: %s' % BMC_RESET_TYPE)
raise SelfClientException('Unsupported option: %s' % BMC_RESET_TYPE, 403)
data = { "ResetType": BMC_RESET_TYPE }
return self.request('POST', target_url, payload=data, cmd='set_bmc_state')
@ -229,11 +236,17 @@ class RedfishRest(object):
members = self._get_members(SYSTEMS_URL)
target_url = members[0]['@odata.id']
data = self.request('GET', target_url, cmd='get_power_actions')
try:
actions = data['Actions'][system_reset_string][reset_type_string]
target_url = data['Actions'][system_reset_string]['target']
actions_dict = data['Actions'][system_reset_string]
target_url = actions_dict['target']
if reset_action_string in actions_dict:
action_info = self.request('GET', actions_dict[reset_action_string], cmd='get_power_actions')
actions = action_info['Parameters'][0]['AllowableValues']
else:
actions = actions_dict[reset_type_string]
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
return (target_url, actions)
@ -241,7 +254,7 @@ class RedfishRest(object):
target_url, actions = self._get_power_actions()
if POWER_RESET_TYPE[state] not in actions:
raise SelfClientException('Unsupported option: %s' % state)
raise SelfClientException('Unsupported option: %s' % state, 403)
data = { "ResetType": POWER_RESET_TYPE[state] }
return self.request('POST', target_url, payload=data, cmd='set_power_state')
@ -258,7 +271,7 @@ class RedfishRest(object):
bootsource = data['Boot']['BootSourceOverrideTarget']
return BOOTSOURCE_GET_STATE.get(bootsource, bootsource)
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
def _get_boot_actions(self):
@ -268,7 +281,7 @@ class RedfishRest(object):
try:
actions = data['Boot']['BootSourceOverrideTarget@Redfish.AllowableValues']
except KeyError as e:
raise SelfServerException('Get KeyError %s' % e.message)
raise SelfServerException('Get KeyError %s' % e.args)
return (target_url, actions)
@ -277,7 +290,7 @@ class RedfishRest(object):
target_url, actions = self._get_boot_actions()
target_data = BOOTSOURCE_SET_STATE[state]
if target_data not in actions:
raise SelfClientException('Unsupported option: %s' % state)
raise SelfClientException('Unsupported option: %s' % state, 403)
boot_enable = 'Once'
if persistant:

0
xCAT-openbmc-py/lib/python/agent/tests/__init__.py Normal file
View File

0
xCAT-openbmc-py/lib/python/agent/tests/unit/__init__.py Normal file
View File

19
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/bmc_action_rsp.json Normal file
View File

@ -0,0 +1,19 @@
{
"@odata.context": "/redfish/v1/$metadata#ActionInfo.ActionInfo",
"@odata.type": "#ActionInfo.v1_1_0.ActionInfo",
"@odata.id": "/redfish/v1/Managers/BMC/ResetActionInfo",
"Id": "ResetActionInfo",
"Name": "Reset Action Info",
"Parameters": [
{
"Name": "ResetType",
"Required": true,
"DataType": "String",
"AllowableValues": [
"ForceRestart",
"GracefulRestart"
]
}
],
"Oem": {}
}

45
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/chassis_rsp.json Normal file
View File

@ -0,0 +1,45 @@
{
"@odata.context": "/redfish/v1/$metadata#Chassis.Chassis",
"@odata.type": "#Chassis.v1_8_0.Chassis",
"@odata.id": "/redfish/v1/Chassis/Chassis0",
"Id": "Chassis0",
"Name": "OpenPOWER System Chassis",
"ChassisType": "RackMount",
"Manufacturer": "IBM",
"Model": "SYSTEM",
"SerialNumber": "C829UAE15A10564",
"PartNumber": "9006-22P",
"AssetTag": "",
"PowerState": "On",
"IndicatorLED": "Off",
"Status": {
"State": "Enabled",
"Health": "OK"
},
"PhysicalSecurity": {
"IntrusionSensorNumber": 226,
"IntrusionSensor": "HardwareIntrusion",
"IntrusionSensorReArm": "Manual"
},
"Thermal": {
"@odata.id": "/redfish/v1/Chassis/Chassis0/Thermal"
},
"Power": {
"@odata.id": "/redfish/v1/Chassis/Chassis0/Power"
},
"Assembly": {
"@odata.id": "/redfish/v1/Chassis/Chassis0/Assembly"
},
"Links": {
"ComputerSystems": [
{
"@odata.id": "/redfish/v1/Systems/Computer"
}
],
"ManagedBy": [
{
"@odata.id": "/redfish/v1/Managers/BMC"
}
]
}
}

18
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/login_no_auth_rsp.json Normal file
View File

@ -0,0 +1,18 @@
{
"error": {
"code": "Base.1.4.0.GeneralError",
"message": "A general error has occurred. See Resolution for information on how to resolve the error.",
"@Message.ExtendedInfo": [
{
"MessageId": "Base.1.4.0.ResourceAtUriUnauthorized",
"Severity": "Critical",
"Resolution": "Ensure that the appropriate access is provided for the service in order for it to access the URI.",
"Message": "While accessing the resource at /redfish/v1/SessionService/Sessions, the service received an authorization error unauthorized.",
"MessageArgs": [
"/redfish/v1/SessionService/Sessions",
"unauthorized"
]
}
]
}
}

10
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/login_rsp.json Normal file
View File

@ -0,0 +1,10 @@
{
"@odata.type": "#Session.v1_1_1.Session",
"UserName": "ADMIN",
"Description": "Manager User Session",
"@odata.id": "/redfish/v1/SessionService/Sessions/a6cbc1e29e9cd559",
"@odata.context": "/redfish/v1/$metadata#Session.Session",
"Oem": {},
"Id": "a6cbc1e29e9cd559",
"Name": "User Session"
}

90
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/manager_rsp.json Normal file
View File

@ -0,0 +1,90 @@
{
"@odata.context": "/redfish/v1/$metadata#Manager.Manager",
"@odata.type": "#Manager.v1_5_0.Manager",
"@odata.id": "/redfish/v1/Managers/BMC",
"Id": "BMC",
"Description": "Aspeed BMC",
"Name": "Manager",
"ManagerType": "BMC",
"UUID": "00000000-0000-0000-0000-000000000",
"Model": "P9DSU 9006-22P",
"DateTime": "2019-01-22T06:22:55+00:00",
"DateTimeLocalOffset": "+00:00",
"FirmwareVersion": "2.04",
"Status": {
"State": "Enabled",
"Health": "OK"
},
"PowerState": "On",
"SerialConsole": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 1,
"ConnectTypesSupported": [
"IPMI"
]
},
"CommandShell": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 0,
"ConnectTypesSupported": [
"SSH"
]
},
"GraphicalConsole": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 4,
"ConnectTypesSupported": [
"KVMIP"
]
},
"EthernetInterfaces": {
"@odata.id": "/redfish/v1/Managers/BMC/EthernetInterfaces"
},
"SerialInterfaces": {
"@odata.id": "/redfish/v1/Managers/BMC/SerialInterfaces"
},
"NetworkProtocol": {
"@odata.id": "/redfish/v1/Managers/BMC/NetworkProtocol"
},
"LogServices": {
"@odata.id": "/redfish/v1/Managers/BMC/LogServices"
},
"VirtualMedia": {
"@odata.id": "/redfish/v1/Managers/BMC/VirtualMedia"
},
"Links": {
"ManagerForServers": [
{
"@odata.id": "/redfish/v1/Systems/Computer"
}
],
"ManagerForChassis": [
{
"@odata.id": "/redfish/v1/Chassis/Chassis0"
}
],
"ManagerInChassis": {
"@odata.id": "/redfish/v1/Chassis/Chassis0"
}
},
"Actions": {
"#Manager.Reset": {
"target": "/redfish/v1/Managers/BMC/Actions/Manager.Reset",
"@Redfish.ActionInfo": "/redfish/v1/Managers/BMC/ResetActionInfo"
}
},
"Oem": {
"Supermicro": {
"@odata.type": "#SMCManager.v1_0_1.SMCManager",
"FanMode": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/FanMode"
},
"MouseMode": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/MouseMode"
},
"SMTP": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/SMTP"
}
}
}
}

93
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/manager_rsp_v123.json Normal file
View File

@ -0,0 +1,93 @@
{
"@odata.context": "/redfish/v1/$metadata#Manager.Manager",
"@odata.type": "#Manager.v1_5_0.Manager",
"@odata.id": "/redfish/v1/Managers/BMC",
"Id": "BMC",
"Description": "Aspeed BMC",
"Name": "Manager",
"ManagerType": "BMC",
"UUID": "006126AB-B608-E911-8000-0CC47AD55B4E",
"Model": "P9DSU 9006-22P",
"DateTime": "2019-01-22T06:22:55+00:00",
"DateTimeLocalOffset": "+00:00",
"FirmwareVersion": "2.04",
"Status": {
"State": "Enabled",
"Health": "OK"
},
"PowerState": "On",
"SerialConsole": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 1,
"ConnectTypesSupported": [
"IPMI"
]
},
"CommandShell": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 0,
"ConnectTypesSupported": [
"SSH"
]
},
"GraphicalConsole": {
"ServiceEnabled": true,
"MaxConcurrentSessions": 4,
"ConnectTypesSupported": [
"KVMIP"
]
},
"EthernetInterfaces": {
"@odata.id": "/redfish/v1/Managers/BMC/EthernetInterfaces"
},
"SerialInterfaces": {
"@odata.id": "/redfish/v1/Managers/BMC/SerialInterfaces"
},
"NetworkProtocol": {
"@odata.id": "/redfish/v1/Managers/BMC/NetworkProtocol"
},
"LogServices": {
"@odata.id": "/redfish/v1/Managers/BMC/LogServices"
},
"VirtualMedia": {
"@odata.id": "/redfish/v1/Managers/BMC/VirtualMedia"
},
"Links": {
"ManagerForServers": [
{
"@odata.id": "/redfish/v1/Systems/Computer"
}
],
"ManagerForChassis": [
{
"@odata.id": "/redfish/v1/Chassis/Planar"
}
],
"ManagerInChassis": {
"@odata.id": "/redfish/v1/Chassis/Planar"
}
},
"Actions": {
"#Manager.Reset": {
"target": "/redfish/v1/Managers/BMC/Actions/Manager.Reset",
"ResetType@Redfish.AllowableValues": [
"ForceRestart",
"GracefulRestart"
]
}
},
"Oem": {
"Supermicro": {
"@odata.type": "#SMCManager.v1_0_1.SMCManager",
"FanMode": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/FanMode"
},
"MouseMode": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/MouseMode"
},
"SMTP": {
"@odata.id": "/redfish/v1/Managers/BMC/Oem/Supermicro/SMTP"
}
}
}
}

42
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/redfish_v1_rsp.json Normal file
View File

@ -0,0 +1,42 @@
{
"@odata.context": "/redfish/v1/$metadata#ServiceRoot.ServiceRoot",
"@odata.type": "#ServiceRoot.v1_4_0.ServiceRoot",
"@odata.id": "/redfish/v1",
"Id": "v1",
"Name": "Root Service",
"RedfishVersion": "1.6.0",
"UUID": "00000000-0000-0000-0000-0CC47AD55B4E",
"SessionService": {
"@odata.id": "/redfish/v1/SessionService"
},
"AccountService": {
"@odata.id": "/redfish/v1/AccountService"
},
"Registries": {
"@odata.id": "/redfish/v1/Registries"
},
"JsonSchemas": {
"@odata.id": "/redfish/v1/JsonSchemas"
},
"Chassis": {
"@odata.id": "/redfish/v1/Chassis"
},
"Managers": {
"@odata.id": "/redfish/v1/Managers"
},
"Systems": {
"@odata.id": "/redfish/v1/Systems"
},
"UpdateService": {
"@odata.id": "/redfish/v1/UpdateService"
},
"EventService": {
"@odata.id": "/redfish/v1/EventService"
},
"Links": {
"Sessions": {
"@odata.id": "/redfish/v1/SessionService/Sessions"
}
},
"Oem": {}
}

23
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/system_action_rsp.json Normal file
View File

@ -0,0 +1,23 @@
{
"@odata.context": "/redfish/v1/$metadata#ActionInfo.ActionInfo",
"@odata.type": "#ActionInfo.v1_1_0.ActionInfo",
"@odata.id": "/redfish/v1/Systems/Computer/ResetActionInfo",
"Id": "ResetActionInfo",
"Name": "Reset Action Info",
"Parameters": [
{
"Name": "ResetType",
"Required": true,
"DataType": "String",
"AllowableValues": [
"On",
"ForceOff",
"GracefulShutdown",
"GracefulRestart",
"ForceRestart",
"ForceOn"
]
}
],
"Oem": {}
}

79
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/systems_rsp.json Normal file
View File

@ -0,0 +1,79 @@
{
"@odata.context": "/redfish/v1/$metadata#ComputerSystem.ComputerSystem",
"@odata.type": "#ComputerSystem.v1_5_0.ComputerSystem",
"@odata.id": "/redfish/v1/Systems/Computer",
"Id": "Computer",
"Name": "OpenPOWER Computer System",
"Description": "OpenPOWER Computer System",
"Status": {
"State": "Enabled",
"Health": "Critical"
},
"SerialNumber": "C829UAE15A10564",
"PartNumber": "9006-22P",
"Manufacturer": "IBM",
"Model": "SYSTEM",
"SystemType": "Physical",
"BiosVersion": "2.04 20190118",
"UUID": "00000000-0000-0000-0000-0000000000",
"ProcessorSummary": {
"Count": 2,
"Model": "POWER CPU",
"Status": {
"State": "Enabled",
"Health": "OK"
}
},
"IndicatorLED": "Off",
"PowerState": "On",
"Boot": {
"BootSourceOverrideMode": "Legacy",
"BootSourceOverrideEnabled": "Once",
"BootSourceOverrideTarget": "None",
"BootSourceOverrideTarget@Redfish.AllowableValues": [
"None",
"Pxe",
"Hdd",
"Diags",
"Cd",
"BiosSetup",
"Usb",
"Floppy"
]
},
"HostWatchdogTimer": {
"FunctionEnabled": true,
"WarningAction": "None",
"WarningAction@Redfish.AllowableValues": [
"None"
],
"TimeoutAction": "None",
"TimeoutAction@Redfish.AllowableValues": [
"None",
"ResetSystem",
"PowerDown",
"PowerCycle"
],
"Status": {
"State": "StandbyOffline"
}
},
"Links": {
"Chassis": [
{
"@odata.id": "/redfish/v1/Chassis/chassis0"
}
],
"ManagedBy": [
{
"@odata.id": "/redfish/v1/Managers/BMC"
}
]
},
"Actions": {
"#ComputerSystem.Reset": {
"target": "/redfish/v1/Systems/Computer/Actions/ComputerSystem.Reset",
"@Redfish.ActionInfo": "/redfish/v1/Systems/Computer/ResetActionInfo"
}
}
}

86
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/systems_rsp_v123.json Normal file
View File

@ -0,0 +1,86 @@
{
"@odata.context": "/redfish/v1/$metadata#ComputerSystem.ComputerSystem",
"@odata.type": "#ComputerSystem.v1_5_0.ComputerSystem",
"@odata.id": "/redfish/v1/Systems/Computer",
"Id": "Computer",
"Name": "OpenPOWER Computer System",
"Description": "OpenPOWER Computer System",
"Status": {
"State": "Enabled",
"Health": "Critical"
},
"SerialNumber": "C829UAE15A10564",
"PartNumber": "9006-22P",
"Manufacturer": "IBM",
"Model": "SYSTEM",
"SystemType": "Physical",
"BiosVersion": "2.04 20190118",
"UUID": "00000000-0000-0000-0000-0000000000",
"ProcessorSummary": {
"Count": 2,
"Model": "POWER CPU",
"Status": {
"State": "Enabled",
"Health": "OK"
}
},
"IndicatorLED": "Off",
"PowerState": "On",
"Boot": {
"BootSourceOverrideMode": "Legacy",
"BootSourceOverrideEnabled": "Once",
"BootSourceOverrideTarget": "None",
"BootSourceOverrideTarget@Redfish.AllowableValues": [
"None",
"Pxe",
"Hdd",
"Diags",
"Cd",
"BiosSetup",
"Usb",
"Floppy"
]
},
"HostWatchdogTimer": {
"FunctionEnabled": true,
"WarningAction": "None",
"WarningAction@Redfish.AllowableValues": [
"None"
],
"TimeoutAction": "None",
"TimeoutAction@Redfish.AllowableValues": [
"None",
"ResetSystem",
"PowerDown",
"PowerCycle"
],
"Status": {
"State": "StandbyOffline"
}
},
"Links": {
"Chassis": [
{
"@odata.id": "/redfish/v1/Chassis/chassis0"
}
],
"ManagedBy": [
{
"@odata.id": "/redfish/v1/Managers/BMC"
}
]
},
"Actions": {
"#ComputerSystem.Reset": {
"target": "/redfish/v1/Systems/Computer/Actions/ComputerSystem.Reset",
"ResetType@Redfish.AllowableValues": [
"On",
"ForceOff",
"GracefulShutdown",
"GracefulRestart",
"ForceRestart",
"ForceOn"
]
}
}
}

7
xCAT-openbmc-py/lib/python/agent/tests/unit/json_data/with_error_rsp.json Normal file
View File

@ -0,0 +1,7 @@
{
"error":
{
"message": "Successfully Completed Request",
"code": "Base.1.4.0.Success"
}
}

0
xCAT-openbmc-py/lib/python/agent/tests/unit/test_hwctl/__init__.py Normal file
View File

375
xCAT-openbmc-py/lib/python/agent/tests/unit/test_hwctl/test_redfish_client.py Normal file
View File

@ -0,0 +1,375 @@
#!/usr/bin/env python
###############################################################################
# IBM(c) 2018 EPL license http://www.eclipse.org/legal/epl-v10.html
###############################################################################
# -*- coding: utf-8 -*-
#
import pytest
import mock
import json
import os
import logging
import time
import requests
from hwctl import redfish_client as rf
from common.utils import Messager
from common.exceptions import SelfClientException, SelfServerException
DATA_DIR = os.path.dirname(os.path.realpath(__file__)) + '/../json_data'
logging.basicConfig(level=logging.DEBUG)
REDFISH_URL = '/redfish/v1'
class TestRedfishClient(object):
nodeinfo_dict = {'bmc': 'testbmc', 'bmcip': '10.0.0.1', 'username': 'username', 'password': 'password'}
log = logging.getLogger('TestRedfishClient')
rf_rest = rf.RedfishRest(name='testnode', nodeinfo=nodeinfo_dict, messager=Messager(),
debugmode=True, verbose=False)
headers = {'Content-Type': 'application/json'}
with open("%s/redfish_v1_rsp.json" % DATA_DIR,'r') as load_f:
rf_v1 = json.load(load_f)
chassis_url = rf_v1['Chassis']['@odata.id']
manager_url = rf_v1['Managers']['@odata.id']
systems_url = rf_v1['Systems']['@odata.id']
session_url = rf_v1['Links']['Sessions']['@odata.id']
def test__init__(self):
assert self.rf_rest.name == 'testnode'
assert self.rf_rest.bmc == 'testbmc'
assert self.rf_rest.bmcip == '10.0.0.1'
assert self.rf_rest.username == 'username'
assert self.rf_rest.password == 'password'
assert isinstance(self.rf_rest.messager, Messager)
assert self.rf_rest.verbose == True
assert self.rf_rest.root_url == 'https://10.0.0.1'
def test__print_record_log(self):
self.rf_rest._print_record_log("test__print_record_log", "test")
assert self.rf_rest.messager.info
assert time.asctime
def test__print_error_log(self):
self.rf_rest._print_record_log("test__print_error_log", "test")
assert self.rf_rest._print_record_log
def test__log_request(self):
self.rf_rest._print_record_log = mock.Mock(return_value=True)
login_data = json.dumps({ "UserName": self.rf_rest.username, "Password": self.rf_rest.password })
msg_data = login_data.replace('"Password": "%s"' % self.rf_rest.password, '"Password": "xxxxxx"')
test_data = json.dumps({ "Test": True })
login_msg = 'curl -k -X POST -H "Content-Type: application/json" https://10.0.0.1%s -d \'%s\' -v' % (self.session_url, msg_data)
test_data_msg = 'curl -k -X POST -H "Content-Type: application/json" -H "X-Auth-Token: xxxxxx" https://10.0.0.1/redfish/v1/Managers -d \'%s\' -v' % test_data
get_msg = 'curl -k -X GET -H "Content-Type: application/json" -H "X-Auth-Token: xxxxxx" https://10.0.0.1/redfish/v1/Managers'
assert self.rf_rest._log_request('POST', self.rf_rest.root_url + self.session_url, self.headers, data=login_data, cmd='login') == login_msg
assert self.rf_rest._log_request('POST', self.rf_rest.root_url + self.manager_url, self.headers, data=test_data, cmd='test__log_request') == test_data_msg
assert self.rf_rest._log_request('GET', self.rf_rest.root_url + self.manager_url, self.headers, cmd='test__log_request') == get_msg
def test_handle_response_not_ok(self):
test_rsp = requests.Response()
test_rsp.status_code = 401
with open("%s/login_no_auth_rsp.json" % DATA_DIR,'r') as load_f:
test_rsp._content = json.dumps(json.load(load_f))
with pytest.raises(SelfClientException) as excinfo:
data = self.rf_rest.handle_response(test_rsp, cmd='test_handle_response_not_ok')
assert excinfo.type == SelfClientException
assert 'the service received an authorization error unauthorized' in str(excinfo.value)
def test_handle_response_no_auth(self):
test_rsp = requests.Response()
test_rsp.status_code = 201
test_rsp.headers = {}
with open("%s/login_rsp.json" % DATA_DIR,'r') as load_f:
test_rsp._content = json.dumps(json.load(load_f))
with pytest.raises(SelfServerException) as excinfo:
data = self.rf_rest.handle_response(test_rsp, cmd='login')
assert excinfo.type == SelfServerException
assert 'Login Failed: Did not get Session Token from response' in str(excinfo.value)
def test_handle_response_name(self):
test_rsp = requests.Response()
test_rsp.status_code = 200
test_rsp.headers = {'X-Auth-Token': 'abcdefghijklmn'}
with open("%s/login_rsp.json" % DATA_DIR,'r') as load_f:
file_data = json.load(load_f)
test_rsp._content = json.dumps(file_data)
data = self.rf_rest.handle_response(test_rsp, cmd='get_information')
assert data == file_data
def test_handle_response_error(self):
test_rsp = requests.Response()
test_rsp.status_code = 200
test_rsp.headers = {'X-Auth-Token': 'abcdefghijklmn'}
with open("%s/with_error_rsp.json" % DATA_DIR,'r') as load_f:
file_data = json.load(load_f)
test_rsp._content = json.dumps(file_data)
data = self.rf_rest.handle_response(test_rsp, cmd='get_information')
assert data == file_data
def test_request_login_connect_failed(self):
login_data = { "UserName": self.rf_rest.username, "Password": self.rf_rest.password }
self.rf_rest.session.request = mock.Mock(side_effect=SelfServerException('Login to BMC failed: Can\'t connect to'))
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.request('POST', self.session_url, headers=self.headers, payload=login_data, cmd='login')
assert excinfo.type == SelfServerException
assert 'Login to BMC failed: Can\'t connect to' in str(excinfo.value)
def test_request_connect_failed(self):
self.rf_rest.session.request = mock.Mock(side_effect=SelfServerException('BMC did not respond. Validate BMC configuration and retry the command.'))
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.request('GET', self.manager_url, headers=self.headers)
assert excinfo.type == SelfServerException
assert 'BMC did not respond. Validate BMC configuration and retry the command.' in str(excinfo.value)
def test_request_value_error(self):
self.rf_rest.session.request = mock.Mock(return_value='Mock return value for value error')
self.rf_rest.handle_response = mock.Mock(side_effect=ValueError())
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.request('GET', self.manager_url, headers=self.headers)
assert excinfo.type == SelfServerException
assert 'Received wrong format response:' in str(excinfo.value)
def test_request_login_success(self):
login_data = json.dumps({ "UserName": self.rf_rest.username, "Password": self.rf_rest.password })
with open("%s/login_rsp.json" % DATA_DIR,'r') as load_f:
response = json.load(load_f)
self.rf_rest.session.request = mock.Mock(return_value=None)
self.rf_rest.handle_response = mock.Mock(return_value=response)
data = self.rf_rest.request('POST', self.session_url, headers=self.headers, payload=login_data, cmd='login')
assert self.rf_rest.session.request
assert data == response
def test_login_success(self):
with open("%s/login_rsp.json" % DATA_DIR,'r') as load_f:
login_rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=login_rsp)
assert self.rf_rest.login() == None
def test_login_not_respond(self):
self.rf_rest.request = mock.Mock(side_effect=SelfServerException('BMC did not respond. Validate BMC configuration and retry the command.'))
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.login()
assert excinfo.type == SelfServerException
assert 'BMC did not respond. Validate BMC configuration and retry the command.' in str(excinfo.value)
def test_login_value_error(self):
self.rf_rest.request = mock.Mock(side_effect=SelfServerException('Received wrong format response: xxxxxx'))
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.login()
assert excinfo.type == SelfServerException
assert 'Received wrong format response:' in str(excinfo.value)
def test__get_members(self):
resp_data = {"Members": [ {"@odata.id": self.manager_url + "/BMC"} ] }
self.rf_rest.request = mock.Mock(return_value=resp_data)
members = self.rf_rest._get_members(self.manager_url)
assert members == [ {"@odata.id": self.manager_url + "/BMC"} ]
def test__get_members_keyerror(self):
self.rf_rest.request = mock.Mock(return_value={"key": "value"})
with pytest.raises(SelfServerException) as excinfo:
members = self.rf_rest._get_members(self.manager_url)
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_get_bmc_state(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.manager_url + "/BMC"} ])
with open("%s/manager_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_bmc_state() == "On"
def test_get_bmc_state_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.manager_url + "/BMC"} ])
self.rf_rest.request = mock.Mock(return_value={"powerState": "Off"})
with pytest.raises(SelfServerException) as excinfo:
resp_data = self.rf_rest.get_bmc_state()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_get_chassis_power_state(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.chassis_url + '/MotherBoard'} ])
with open("%s/chassis_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_chassis_power_state() == 'On'
def test_get_chassis_power_state_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.chassis_url + '/MotherBoard'} ])
self.rf_rest.request = mock.Mock(return_value={"Powerstate": "On"})
with pytest.raises(SelfServerException) as excinfo:
resp_data = self.rf_rest.get_chassis_power_state()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_get_systems_power_state(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_systems_power_state() == 'On'
def test_get_systems_power_state_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
self.rf_rest.request = mock.Mock(return_value={"powerstate": "On"})
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.get_systems_power_state()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test__get_bmc_actions(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.manager_url + '/BMC'} ])
with open("%s/manager_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
with open("%s/bmc_action_rsp.json" % DATA_DIR,'r') as load_f:
actioninfo = json.load(load_f)
self.rf_rest.request = mock.Mock(side_effect=[rsp, actioninfo])
reset_string = '#Manager.Reset'
assert self.rf_rest._get_bmc_actions() == (rsp['Actions'][reset_string]['target'], actioninfo['Parameters'][0]['AllowableValues'])
def test__get_bmc_actions_v123(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.manager_url + '/BMC'} ])
with open("%s/manager_rsp_v123.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
reset_string = '#Manager.Reset'
assert self.rf_rest._get_bmc_actions() == (rsp['Actions'][reset_string]['target'], rsp['Actions'][reset_string]['ResetType@Redfish.AllowableValues'])
def test__get_bmc_actions_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.manager_url + '/BMC'} ])
with open("%s/manager_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest._get_bmc_actions()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_reboot_bmc(self):
with open("%s/manager_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest._get_bmc_actions = mock.Mock(return_value=(rsp['Actions']['#Manager.Reset']['target'], ['ForceRestart']))
self.rf_rest.request = mock.Mock(return_value=None)
assert self.rf_rest.reboot_bmc() == None
assert self.rf_rest.request
def test_reboot_bmc_unsupported(self):
self.rf_rest._get_bmc_actions = mock.Mock(return_value=(self.manager_url + '/BMC/Reset', ['forcerestart']))
with pytest.raises(SelfClientException) as excinfo:
self.rf_rest.reboot_bmc()
assert excinfo.type == SelfClientException
assert 'Unsupported option:' in str(excinfo.value)
def test__get_power_actions(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
with open("%s/system_action_rsp.json" % DATA_DIR,'r') as load_f:
actioninfo = json.load(load_f)
self.rf_rest.request = mock.Mock(side_effect=[rsp, actioninfo])
reset_string = '#ComputerSystem.Reset'
assert self.rf_rest._get_power_actions() == (rsp['Actions'][reset_string]['target'], actioninfo['Parameters'][0]['AllowableValues'])
def test__get_power_actions_v123(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp_v123.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
reset_string = '#ComputerSystem.Reset'
assert self.rf_rest._get_power_actions() == (rsp['Actions'][reset_string]['target'], rsp['Actions'][reset_string]['ResetType@Redfish.AllowableValues'])
def test__get_power_actions_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest._get_power_actions()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_set_power_state(self):
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
with open("%s/system_action_rsp.json" % DATA_DIR,'r') as load_f:
actioninfo = json.load(load_f)
reset_string = '#ComputerSystem.Reset'
self.rf_rest._get_power_actions = mock.Mock(return_value=(rsp['Actions'][reset_string]['target'], actioninfo['Parameters'][0]['AllowableValues']))
self.rf_rest.request = mock.Mock(return_value=None)
assert self.rf_rest.set_power_state('on') == None
assert self.rf_rest.request
def test_set_power_state_unsupported(self):
self.rf_rest._get_power_actions = mock.Mock(return_value=(self.systems_url + '/Computer/Reset', ['ForceRestart', 'ForceOff']))
with pytest.raises(SelfClientException) as excinfo:
self.rf_rest.set_power_state('on')
assert excinfo.type == SelfClientException
assert 'Unsupported option:' in str(excinfo.value)
def test_get_boot_state(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_boot_state() == "boot override inactive"
rsp['Boot']['BootSourceOverrideTarget'] = 'Pxe'
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_boot_state() == 'Network'
rsp['Boot']['BootSourceOverrideEnabled'] = 'Disabled'
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest.get_boot_state() == "boot override inactive"
def test_get_boot_state_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
del rsp['Boot']['BootSourceOverrideEnabled']
self.rf_rest.request = mock.Mock(return_value=rsp)
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest.get_boot_state()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test__get_boot_actions(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest.request = mock.Mock(return_value=rsp)
assert self.rf_rest._get_boot_actions() == (self.systems_url + '/Computer', rsp['Boot']['BootSourceOverrideTarget@Redfish.AllowableValues'])
def test__get_boot_actions_keyerror(self):
self.rf_rest._get_members = mock.Mock(return_value=[ {"@odata.id": self.systems_url + '/Computer'} ])
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
del rsp['Boot']['BootSourceOverrideTarget@Redfish.AllowableValues']
self.rf_rest.request = mock.Mock(return_value=rsp)
with pytest.raises(SelfServerException) as excinfo:
self.rf_rest._get_boot_actions()
assert excinfo.type == SelfServerException
assert 'Get KeyError' in str(excinfo.value)
def test_set_boot_state(self):
with open("%s/systems_rsp.json" % DATA_DIR,'r') as load_f:
rsp = json.load(load_f)
self.rf_rest._get_boot_actions = mock.Mock(return_value=(self.systems_url + '/Computer', rsp['Boot']['BootSourceOverrideTarget@Redfish.AllowableValues']))
self.rf_rest.request = mock.Mock(return_value=None)
assert self.rf_rest.set_boot_state(False, 'def') == None
assert self.rf_rest.request
assert self.rf_rest.set_boot_state(True, 'cd') == None
assert self.rf_rest.request
def test_set_boot_state_unsupported(self):
allow_values = ['cd','def']
self.rf_rest._get_boot_actions = mock.Mock(return_value=(self.systems_url + '/Computer', allow_values))
with pytest.raises(SelfClientException) as excinfo:
self.rf_rest.set_boot_state(False, 'hd')
assert excinfo.type == SelfClientException
assert 'Unsupported option:' in str(excinfo.value)
def test_init_no_bmcip():
nodeinfo_dict = {'bmc': 'testbmc', 'username': 'username', 'password': 'password'}
rf_rest_new = rf.RedfishRest(name='testnode', nodeinfo=nodeinfo_dict, messager=Messager(),
debugmode=True, verbose=False)
assert rf_rest_new.bmcip == 'testnode'

29
xCAT-server/lib/xcat/plugins/ddns.pm
View File

@ -785,7 +785,7 @@ sub process_request {
"Update Named Conf dir $ctx->{dbdir} $ctx->{zonesdir}";
xCAT::MsgUtils->message("I", $rsp, $callback);
}
$ctx->{forwardmode} = get_forwardmode();
update_namedconf($ctx, $slave);
unless ($slave)
@ -935,6 +935,27 @@ sub get_zonesdir {
return "$ZonesDir";
}
sub get_forwardmode {
my $forwardmode;
my @entries = xCAT::TableUtils->get_site_attribute("dnsforwardmode");
my $site_entry = $entries[0];
if (defined($site_entry)) {
if ($site_entry =~ /^only$|^first$/) {
$forwardmode = $site_entry;
} elsif ($site_entry =~ /^no$/) {
$forwardmode = ""
}else {
my $rsp = {};
$rsp->{data}->[0] = "forward mode $site_entry is not supported, supported value: only, first, no.";
xCAT::MsgUtils->message("S", "forward mode $site_entry is not supported, supported value: only, first, no.");
xCAT::MsgUtils->message("W", $rsp, $callback);
return;
}
}
return "$forwardmode";
}
sub get_conf {
my $conf = "/etc/named.conf";
@ -1114,6 +1135,8 @@ sub update_namedconf {
push @newnamed, "\t\t" . $_ . ";\n";
}
push @newnamed, "\t};\n";
} elsif ($ctx->{forwardmode} and $line =~ /forward/) {
push @newnamed, "\tforward " . $ctx->{forwardmode} . ";\n";
} elsif ($ctx->{empty_zones_enable} and $line =~ /empty-zones-enable/) {
push @newnamed, "\tempty-zones-enable " . $ctx->{empty_zones_enable} . ";\n";
} elsif ($ctx->{slaves} and $line =~ /allow-transfer \{/) {
@ -1255,6 +1278,10 @@ sub update_namedconf {
push @newnamed, "\t};\n";
}
if ($ctx->{forwardmode}){
push @newnamed, "\tforward " . $ctx->{forwardmode} . ";\n";
}
if ($ctx->{empty_zones_enable}){
push @newnamed, "\tempty-zones-enable " . $ctx->{empty_zones_enable} . ";\n";
}

6
xCAT-server/lib/xcat/plugins/dhcp.pm
View File

@ -610,7 +610,7 @@ sub addnode
$hname = $node;
} #Default to hostname equal to nodename
unless ($mac) { next; } #Skip corrupt format
if ($mac !~ /^[0-9a-fA-F]{2}(-[0-9a-fA-F]{2}){5}$|^[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}$/)
if ($mac !~ /^[0-9a-fA-F]{2}(-[0-9a-fA-F]{2}){5,7}$|^[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5,7}$/)
{
$callback->(
{
@ -764,6 +764,10 @@ sub addnode
$hostname = $1 . "-hf" . $count;
}
}
} elsif (length($mac) == 23) { # 8 bytes of mac address
# Currently the only thing that has 8 bytes is an infiniband
# or infiniband like device, which is type 32 (0x20).
$hardwaretype = 32;
}
#syslog("local4|err", "Setting $node ($hname|$ip) to " . $mac);

12
xCAT-server/lib/xcat/plugins/sles.pm
View File

@ -937,14 +937,12 @@ sub mkinstall
# trim the "/" in /install/sles11.3/x86_64/
$pkgdir =~ s/\/$//;
if ($pkgdir =~ /^($installroot\/$os\/$arch)$/) {
if ( -d "$pkgdir/2") {
$srcdirs[0] = "$pkgdir/1,$pkgdir/2";
}else{
$srcdirs[0] = "$pkgdir/1";
}
$tmppkgdir = join(",", @srcdirs);
if ( -d "$pkgdir/2") {
$srcdirs[0] = "$pkgdir/1,$pkgdir/2";
}else{
$srcdirs[0] = "$pkgdir/1";
}
$tmppkgdir = join(",", @srcdirs);
#Call the Template class to do substitution to produce a kickstart file in the autoinst dir
my $tmperr;

8
xCAT-server/xCAT-wsapi/xcatws-test.py
View File

@ -77,20 +77,20 @@ except Exception as e:
#
# Send a request to get all nodes, passing in user and password
#
all_nodes = requests.get(get_all_nodes + "?userName=" + username + "&userPW=" + password, verify=False)
response = requests.get(get_all_nodes + "?userName=" + username + "&userPW=" + password, verify=False)
# Display returned data
print "List of all nodes extracted with userid and password:"
print all_nodes.content
print response.text
#
# Send a request to get all nodes, passing in a token
#
user_data = {'userName': username,'userPW': password}
token = requests.post(get_token, verify=False, headers={'Content-Type': 'application/json'}, data=json.dumps(user_data))
all_nodes = requests.get(get_all_nodes, verify=False, headers={'X-Auth-Token': token.json()['token']['id']})
response = requests.get(get_all_nodes, verify=False, headers={'X-Auth-Token': token.json()['token']['id']})
# Display returned data
print "List of all nodes extracted with authentication token:"
print all_nodes.content
print response.text
sys.exit(0)

1
xCAT-test/autotest/bundle/rhels7.4_ppc64le.bundle
View File

@ -311,7 +311,6 @@ makentp_v
makentp_h
nodeset_check_warninginfo
runcmdinstaller_h
runcmdinstaller_command
get_xcat_postscripts_loginfo
updatenode_postscripts_loginfo
bmcdiscover_h

303
xCAT-test/autotest/bundle/rhels_ppc_daily.bundle Normal file
View File

@ -0,0 +1,303 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
updatenode_P_script1
updatenode_P_script1_script2
updatenode_P_script2
updatenode_diskful_syncfiles
updatenode_diskful_syncfiles_P_script1
updatenode_diskful_syncfiles_dir
updatenode_diskful_syncfiles_failing
updatenode_diskful_syncfiles_multi_files
updatenode_diskful_syncfiles_rename
updatenode_f_incompatible_flags
updatenode_h
updatenode_k_incompatible_flags
updatenode_postscripts_loginfo
updatenode_script3
updatenode_syncfile_APPEND
updatenode_syncfile_EXECUTE
updatenode_syncfile_EXECUTEALWAYS
updatenode_syncfile_MERGE
updatenode_v
updatenode_without_flag
updatenode_without_options
xdcp_nonroot_user
xdcp_src_dst
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_i_linux
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
assign_certain_command_permission
chdef_dynamic_group
chdef_group
chdef_group_p
chdef_m
chdef_multiple_keys
chdef_n
chdef_nicips
chdef_null
chdef_p
chdef_site_check
chdef_t_network
chdef_t_node
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
getmacs_d
getmacs_f_D
getmacs_noderange
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_h
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_d
makehosts_h
makehosts_help
makehosts_l
makehosts_n
makehosts_n_noderange
makehosts_null
makeknownhosts_node_d
makentp_h
makentp_v
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_rhels73
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderange_10-20
noderange_XCAT_NODE_PREFIX
noderange_XCAT_NODE_SUFFIX
noderange_exclusion
noderange_group1-group3
noderange_group_intersection
noderange_individual_grp
noderange_individual_node
noderange_node01-node10
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_errorcommand
nodeset_grub2
nodeset_noderange
nodeset_yaboot
nodeset_stat
nodestat_err_node
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_all
rinv_bus
rinv_config
rinv_firm
rinv_model
rinv_serial
rinv_noderange_err
rmdef_null
rmdef_t_err
rpower_boot
rpower_err_noderange
rpower_noderange
rpower_noderange_nodeps
rpower_off
rpower_on
rpower_stat
rscan_noderange
rscan_w
rscan_x
rscan_x_w
rscan_z
rscan_z_w
run_command_with_XCATBYPASS
runcmdinstaller_h
rvitals_all
rvitals_lcds
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_p_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

71
xCAT-test/autotest/bundle/rhels_ppc_weekly.bundle Normal file
View File

@ -0,0 +1,71 @@
#INCLUDE:rhels_ppc_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
addkit_v
addkit_h
addkit_kit
addkit_i
addkit_multikit
addkit_p
addkitcomp_v
addkitcomp_h
addkitcomp_i
addkitcomp_f
buildkit_v
buildkit_h
buildkit_create
buildkit_create_l
buildkit_cleanrepo_all
buildkit_buildtar
chkkitcomp_v
chkkitcomp_h
chkkitcomp_V
lskit_v
lskit_h
lskit_F
lskit_K
lskit_R
lskit_C
lskitcomp_v
lskitcomp_h
lskitcomp_C
lskitcomp_S
lskitdeployparam_v
lskitdeployparam_h
lskitdeployparam_no_param
lskitdeployparam_k_1
lskitdeployparam_c_1
rmkit_v
rmkit_h
rmkit_t_no
rmkit_t_yes
rmkit_f
rmkit_V
rmkitcomp_v
rmkitcomp_h
bmcdiscover_h
bmcdiscover_nmap_range
bmcdiscover_v
bmcdiscover_range_w
bmcdiscover_range_z
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
confignetwork_static_installnic
get_xcat_postscripts_loginfo
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
rmimage_diskless
rpower_reset
runcmdinstaller_command
redhat_migration1
redhat_migration2

305
xCAT-test/autotest/bundle/rhels_ppcle_daily.bundle Normal file
View File

@ -0,0 +1,305 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
updatenode_P_script1
updatenode_P_script1_script2
updatenode_P_script2
updatenode_diskful_syncfiles
updatenode_diskful_syncfiles_P_script1
updatenode_diskful_syncfiles_dir
updatenode_diskful_syncfiles_failing
updatenode_diskful_syncfiles_multi_files
updatenode_diskful_syncfiles_rename
updatenode_f_incompatible_flags
updatenode_h
updatenode_k_incompatible_flags
updatenode_postscripts_loginfo
updatenode_script3
updatenode_syncfile_APPEND
updatenode_syncfile_EXECUTE
updatenode_syncfile_EXECUTEALWAYS
updatenode_syncfile_MERGE
updatenode_v
updatenode_without_flag
updatenode_without_options
xdcp_nonroot_user
xdcp_src_dst
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_i_linux
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
assign_certain_command_permission
chdef_dynamic_group
chdef_group
chdef_group_p
chdef_m
chdef_multiple_keys
chdef_n
chdef_nicips
chdef_null
chdef_p
chdef_site_check
chdef_t_network
chdef_t_node
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_2eth_bridge_br0
confignetwork_2eth_bridge_br22_br33
confignetwork__bridge_false
confignetwork_bond_eth2_eth3
confignetwork_bond_false
confignetwork_disable_set_to_1
confignetwork_disable_set_to_yes
confignetwork_installnic_2eth_bridge_br22_br33
confignetwork_niccustomscripts
confignetwork_s_installnic_secondarynic_updatenode
confignetwork_secondarynic_nicaliases_updatenode
confignetwork_secondarynic_nicextraparams_updatenode
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_secondarynic_thirdnic_multiplevalue_updatenode
confignetwork_secondarynic_updatenode
confignetwork_vlan_bond
confignetwork_vlan_eth0
confignetwork_vlan_false
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_h
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_d
makehosts_h
makehosts_help
makehosts_l
makehosts_n
makehosts_n_noderange
makehosts_null
makeknownhosts_node_d
makentp_h
makentp_v
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_rhels73
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderange_10-20
noderange_XCAT_NODE_PREFIX
noderange_XCAT_NODE_SUFFIX
noderange_exclusion
noderange_group1-group3
noderange_group_intersection
noderange_individual_grp
noderange_individual_node
noderange_node01-node10
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_disjointdhcps_petitboot
nodeset_errorcommand
nodeset_grub2
nodeset_noderange
nodeset_petitboot
nodeset_shell_incorrectmasterip
nodeset_stat
nodestat_err_node
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_noderange_err
rmdef_null
rmdef_t_err
rpower_boot
rpower_err_noderange
rpower_noderange
rpower_noderange_nodeps
rpower_off
rpower_on
rpower_stat
run_command_with_XCATBYPASS
runcmdinstaller_h
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_p_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

74
xCAT-test/autotest/bundle/rhels_ppcle_weekly.bundle Normal file
View File

@ -0,0 +1,74 @@
#INCLUDE:rhels_ppcle_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
addkit_v
addkit_h
addkit_kit
addkit_i
addkit_multikit
addkit_p
addkitcomp_v
addkitcomp_h
addkitcomp_i
addkitcomp_f
buildkit_v
buildkit_h
buildkit_create
buildkit_create_l
buildkit_cleanrepo_all
buildkit_buildtar
chkkitcomp_v
chkkitcomp_h
chkkitcomp_V
lskit_v
lskit_h
lskit_F
lskit_K
lskit_R
lskit_C
lskitcomp_v
lskitcomp_h
lskitcomp_C
lskitcomp_S
lskitdeployparam_v
lskitdeployparam_h
lskitdeployparam_no_param
lskitdeployparam_k_1
lskitdeployparam_c_1
rmkit_v
rmkit_h
rmkit_t_no
rmkit_t_yes
rmkit_f
rmkit_V
rmkitcomp_v
rmkitcomp_h
bmcdiscover_h
bmcdiscover_nmap_range
bmcdiscover_v
bmcdiscover_range_w
bmcdiscover_range_z
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
confignetwork_static_installnic
get_xcat_postscripts_loginfo
nodeset_cmdline
nodeset_runimg
nodeset_shell
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
rmimage_diskless
rpower_reset
runcmdinstaller_command
redhat_migration1
redhat_migration2

304
xCAT-test/autotest/bundle/rhels_x86_daily.bundle Normal file
View File

@ -0,0 +1,304 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
updatenode_P_script1
updatenode_P_script1_script2
updatenode_P_script2
updatenode_diskful_syncfiles
updatenode_diskful_syncfiles_P_script1
updatenode_diskful_syncfiles_dir
updatenode_diskful_syncfiles_failing
updatenode_diskful_syncfiles_multi_files
updatenode_diskful_syncfiles_rename
updatenode_f_incompatible_flags
updatenode_h
updatenode_k_incompatible_flags
updatenode_postscripts_loginfo
updatenode_script3
updatenode_syncfile_APPEND
updatenode_syncfile_EXECUTE
updatenode_syncfile_EXECUTEALWAYS
updatenode_syncfile_MERGE
updatenode_v
updatenode_without_flag
updatenode_without_options
xdcp_nonroot_user
xdcp_src_dst
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_i_linux
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
assign_certain_command_permission
chdef_dynamic_group
chdef_group
chdef_group_p
chdef_m
chdef_multiple_keys
chdef_n
chdef_nicips
chdef_null
chdef_p
chdef_site_check
chdef_t_network
chdef_t_node
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_2eth_bridge_br0
confignetwork_2eth_bridge_br22_br33
confignetwork__bridge_false
confignetwork_bond_eth2_eth3
confignetwork_bond_false
confignetwork_disable_set_to_1
confignetwork_disable_set_to_yes
confignetwork_installnic_2eth_bridge_br22_br33
confignetwork_niccustomscripts
confignetwork_s_installnic_secondarynic_updatenode
confignetwork_secondarynic_nicaliases_updatenode
confignetwork_secondarynic_nicextraparams_updatenode
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_secondarynic_thirdnic_multiplevalue_updatenode
confignetwork_secondarynic_updatenode
confignetwork_vlan_bond
confignetwork_vlan_eth0
confignetwork_vlan_false
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_h
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_d
makehosts_h
makehosts_help
makehosts_l
makehosts_n
makehosts_n_noderange
makehosts_null
makeknownhosts_node_d
makentp_h
makentp_v
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_rhels73
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderange_10-20
noderange_XCAT_NODE_PREFIX
noderange_XCAT_NODE_SUFFIX
noderange_exclusion
noderange_group1-group3
noderange_group_intersection
noderange_individual_grp
noderange_individual_node
noderange_node01-node10
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_errorcommand
nodeset_xnba
nodeset_noderange
nodeset_shell_incorrectmasterip
nodeset_stat
nodestat_err_node
nodestat_noderange
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_noderange_err
rmdef_null
rmdef_t_err
rpower_boot
rpower_err_noderange
rpower_noderange
rpower_noderange_nodeps
rpower_off
rpower_on
rpower_stat
run_command_with_XCATBYPASS
runcmdinstaller_h
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_p_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

74
xCAT-test/autotest/bundle/rhels_x86_weekly.bundle Normal file
View File

@ -0,0 +1,74 @@
#INCLUDE:rhels_x86_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
addkit_v
addkit_h
addkit_kit
addkit_i
addkit_multikit
addkit_p
addkitcomp_v
addkitcomp_h
addkitcomp_i
addkitcomp_f
buildkit_v
buildkit_h
buildkit_create
buildkit_create_l
buildkit_cleanrepo_all
buildkit_buildtar
chkkitcomp_v
chkkitcomp_h
chkkitcomp_V
lskit_v
lskit_h
lskit_F
lskit_K
lskit_R
lskit_C
lskitcomp_v
lskitcomp_h
lskitcomp_C
lskitcomp_S
lskitdeployparam_v
lskitdeployparam_h
lskitdeployparam_no_param
lskitdeployparam_k_1
lskitdeployparam_c_1
rmkit_v
rmkit_h
rmkit_t_no
rmkit_t_yes
rmkit_f
rmkit_V
rmkitcomp_v
rmkitcomp_h
bmcdiscover_h
bmcdiscover_nmap_range
bmcdiscover_v
bmcdiscover_range_w
bmcdiscover_range_z
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
confignetwork_static_installnic
get_xcat_postscripts_loginfo
nodeset_cmdline
nodeset_runimg
nodeset_shell
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
rmimage_diskless
rpower_reset
runcmdinstaller_command
redhat_migration1
redhat_migration2

282
xCAT-test/autotest/bundle/sles_ppc_daily.bundle Normal file
View File

@ -0,0 +1,282 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
xdcp_nonroot_user
xdcp_src_dst
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
chdef_dynamic_group
chdef_group
chdef_group_p
chdef_m
chdef_multiple_keys
chdef_n
chdef_nicips
chdef_null
chdef_p
chdef_site_check
chdef_t_network
chdef_t_node
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_static_installnic
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
getmacs_d
getmacs_f_D
getmacs_noderange
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_h
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_d
makehosts_h
makehosts_help
makehosts_l
makehosts_n
makehosts_n_noderange
makehosts_null
makeknownhosts_node_d
makentp_h
makentp_v
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderange_10-20
noderange_XCAT_NODE_PREFIX
noderange_XCAT_NODE_SUFFIX
noderange_exclusion
noderange_group1-group3
noderange_group_intersection
noderange_individual_grp
noderange_individual_node
noderange_node01-node10
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_errorcommand
nodeset_grub2
nodeset_noderange
nodeset_stat
nodeset_yaboot
nodestat_err_node
nodestat_usage
packimage_h
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_all
rinv_bus
rinv_config
rinv_firm
rinv_model
rinv_noderange_err
rinv_serial
rmdef_null
rmdef_t_err
rmimage_diskless
rpower_boot
rpower_err_noderange
rpower_noderange
rpower_noderange_nodeps
rpower_off
rpower_on
rpower_reset
rpower_stat
rscan_noderange
rscan_w
rscan_x
rscan_x_w
rscan_z
rscan_z_w
rvitals_all
rvitals_lcds
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_p_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
updatenode_diskful_syncfiles_failing
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

14
xCAT-test/autotest/bundle/sles_ppc_weekly.bundle Normal file
View File

@ -0,0 +1,14 @@
#INCLUDE:sles_ppc_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_xz
packimage_m_tar_c_gzip
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
sles_migration1
sles_migration2

250
xCAT-test/autotest/bundle/sles_ppcle_daily.bundle Normal file
View File

@ -0,0 +1,250 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
assign_certain_command_permission
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
xdcp_nonroot_user
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_i_linux
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
chdef_nicips
chdef_null
chdef_site_check
chdef_t_o_error
chdef_z
chtab_d
chtab_err_symble
chtab_err_table
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_disable_set_to_1
confignetwork_disable_set_to_yes
confignetwork_niccustomscripts
confignetwork_s_installnic_secondarynic_updatenode
confignetwork_secondarynic_nicaliases_updatenode
confignetwork_secondarynic_nicextraparams_updatenode
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_secondarynic_thirdnic_multiplevalue_updatenode
confignetwork_secondarynic_updatenode
confignetwork_static_installnic
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_h
makehosts_help
makehosts_n
makehosts_n_noderange
makeknownhosts_node_d
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_disjointdhcps_petitboot
nodeset_errorcommand
nodeset_noderange
nodeset_shell_incorrectmasterip
nodeset_stat
nodeset_grub2
nodeset_petitboot
nodestat_err_node
nodestat_noderange
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_noderange_err
rmdef_null
rmdef_t_err
rmimage_diskless
rpower_err_noderange
run_command_with_XCATBYPASS
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
updatenode_diskful_syncfiles_failing
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

21
xCAT-test/autotest/bundle/sles_ppcle_weekly.bundle Normal file
View File

@ -0,0 +1,21 @@
#INCLUDE:sles_ppcle_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_pigz
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_pigz
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
nodeset_cmdline
nodeset_runimg
nodeset_shell
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
sles_migration1
sles_migration2

248
xCAT-test/autotest/bundle/sles_x86_daily.bundle Normal file
View File

@ -0,0 +1,248 @@
SN_setup_case
reg_linux_diskless_installation_hierarchy
reg_linux_diskfull_installation_hierarchy
assign_certain_command_permission
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
xdcp_nonroot_user
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_i_linux
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t
chdef_nicips
chdef_null
chdef_site_check
chdef_t_o_error
chdef_z
chtab_d
chtab_err_symble
chtab_err_table
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_disable_set_to_1
confignetwork_disable_set_to_yes
confignetwork_niccustomscripts
confignetwork_s_installnic_secondarynic_updatenode
confignetwork_secondarynic_nicaliases_updatenode
confignetwork_secondarynic_nicextraparams_updatenode
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_secondarynic_thirdnic_multiplevalue_updatenode
confignetwork_secondarynic_updatenode
confignetwork_static_installnic
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lslite_h
lslite_i
lslite_noderange
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a
makedhcp_a_d
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns
makedns_d_node
makedns_n
makedns_n_noderange
makehost_n_r
makehosts_h
makehosts_help
makehosts_n
makehosts_n_noderange
makeknownhosts_node_d
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_check_warninginfo
nodeset_errorcommand
nodeset_noderange
nodeset_shell_incorrectmasterip
nodeset_stat
nodeset_xnba
nodestat_err_node
nodestat_noderange
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rinv_noderange_err
rmdef_null
rmdef_t_err
rmimage_diskless
rpower_err_noderange
run_command_with_XCATBYPASS
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
updatenode_diskful_syncfiles_failing
xcatconfig_c
xcatconfig_u_check_xcatsslversion_rhels_sles
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab

21
xCAT-test/autotest/bundle/sles_x86_weekly.bundle Normal file
View File

@ -0,0 +1,21 @@
#INCLUDE:sles_x86_daily.bundle#
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_pigz
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_pigz
packimage_m_tar_c_xz
packimage_o_p_a_m
reg_linux_statelite_installation_hierarchy_by_nfs
reg_linux_statelite_installation_hierarchy_by_ramdisk
nodeset_cmdline
nodeset_runimg
nodeset_shell
reg_linux_diskfull_installation_flat
reg_linux_diskless_installation_flat
reg_linux_statelite_installation_flat
sles_migration1
sles_migration2

229
xCAT-test/autotest/bundle/ubuntu_ppcle_daily.bundle Normal file
View File

@ -0,0 +1,229 @@
reg_linux_diskless_installation_flat
reg_linux_diskfull_installation_flat
assign_certain_command_permission
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
chdef_nicips
chdef_null
chdef_site_check
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_static_installnic
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a_ubuntu
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns_d_node
makedns_n_noderange
makedns_ubuntu_n
makehost_n_r
makehosts_h
makehosts_help
makehosts_n
makehosts_n_noderange
makeknownhosts_node_d
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_errorcommand
nodeset_check_warninginfo
nodeset_grub2
nodeset_noderange
nodeset_petitboot
nodeset_shell_incorrectmasterip
nodeset_stat
nodestat_err_node
nodestat_usage
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rmdef_null
rmdef_t_err
rpower_err_noderange
run_command_with_XCATBYPASS
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
updatenode_diskful_syncfiles_failing
xcatconfig_c
xcatconfig_u_check_xcatsslversion_ubuntu
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab
xdcp_nonroot_user
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t

16
xCAT-test/autotest/bundle/ubuntu_ppcle_weekly.bundle Normal file
View File

@ -0,0 +1,16 @@
#INCLUDE:ubuntu_ppcle_daily.bundle#
nodeset_cmdline
nodeset_runimg
nodeset_shell
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_pigz
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_pigz
packimage_m_tar_c_xz
packimage_o_p_a_m
rmimage_diskless
ubuntu_migration2_p8le

229
xCAT-test/autotest/bundle/ubuntu_x86_daily.bundle Normal file
View File

@ -0,0 +1,229 @@
reg_linux_diskless_installation_flat
reg_linux_diskfull_installation_flat
assign_certain_command_permission
bmcdiscover_help
bmcdiscover_q
bmcdiscover_version
chdef_nicips
chdef_null
chdef_site_check
chdef_t_o_error
chdef_z
chtab_d
chtab_h
chtab_modify_key
chtab_modify_node
chtab_null
chtab_v
confignetwork_secondarynic_nicips_updatenode_false
confignetwork_secondarynic_nicnetworks_updatenode_false
confignetwork_secondarynic_nictype_updatenode_false
confignetwork_static_installnic
copycds_a
copycds_a_err
copycds_iso
copycds_n
copycds_n_a
copycds_n_err
disable_root_permission_in_policy_table
dumpxCATdb_a_p_nullskiptables
dumpxCATdb_a_p_nullskiptables_V
dumpxCATdb_a_p_skiptables
dumpxCATdb_h
dumpxCATdb_p_V
dumpxCATdb_p_nullskiptables
dumpxCATdb_p_nullskiptables_V
dumpxCATdb_p_skiptables
dumpxCATdb_v
encrypted_passwd_md5_diskfull
encrypted_passwd_openssl_diskfull
encrypted_passwd_sha256_diskfull
encrypted_passwd_sha512_diskfull
gettab_H
gettab_err
gettab_h
gettab_key_table
lsdef_a
lsdef_null
lsdef_t
lsdef_t_err
lsdef_t_i_o
lsdef_t_o_l
lsdef_t_o_l_z
lsdef_t_w
lsxcatd_a
lsxcatd_d
lsxcatd_h
lsxcatd_null
makeconservercf_d
makeconservercf_noderange
makeconservercf_null
makedhcp_a_ubuntu
makedhcp_d
makedhcp_n
makedhcp_remote_network
makedns_d_node
makedns_n_noderange
makedns_ubuntu_n
makehost_n_r
makehosts_h
makehosts_help
makehosts_n
makehosts_n_noderange
makeknownhosts_node_d
mkdef_null
mkdef_regex_bmc
mkdef_regex_ip
mkdef_regex_kvm
mkdef_regex_nicsip
mkdef_t_o_error
mkdef_z
nodeadd_err_symbol
nodeadd_h
nodeadd_noderange
nodeadd_noderange_nodetype
nodeadd_null
nodeadd_v
nodech_delete
nodech_error_node
nodech_error_table
nodech_h
nodech_noderanage_table_at
nodech_noderange_shortname_groups
nodech_noderange_shortname_mgt
nodech_noderange_shortname_tags
nodech_noderange_table
nodech_noderange_table_arrow
nodech_noderange_table_comma
nodech_noderange_table_equal
nodech_noderange_table_include
nodech_noderange_table_unequal
nodech_noderange_table_uninclude
nodech_v
nodegrpch_err
nodegrpch_groups
nodegrpch_h
nodegrpch_v
nodels_H
nodels_S
nodels_b
nodels_err_noderange
nodels_err_symbol
nodels_h
nodels_noderange
nodels_noderange_shortname_groups
nodels_noderange_shortname_mgt
nodels_noderange_shortname_tags
nodels_noderange_table
nodels_noderange_table_equal
nodels_noderange_table_unequal
nodels_noderange_table_uninclude
nodels_noderange_tablecolumn
nodels_null
nodels_table_include
nodels_tablevalue
nodels_tablevalue_tablecolumn
nodels_v
noderm_err_node
noderm_h
noderm_noderange
noderm_null
nodeset_errorcommand
nodeset_check_warninginfo
nodeset_noderange
nodeset_xnba
nodeset_shell_incorrectmasterip
nodeset_stat
nodestat_err_node
nodestat_usage
nodestat_noderange
packimage_h
packimage_v
pping_h
pping_invalidnode
pping_node
pping_v
prsync_dir_node
prsync_file_node
prsync_h
prsync_v
psh_h
psh_i
psh_l
psh_node_cmd_linux
psh_v
regnotif_err
regnotif_h
regnotif_null
regnotif_o
regnotif_v
restorexCAT_h
restorexCATdb_a_p_V
restorexCATdb_p_V
restorexCATdb_v
restorexCATdb_wrongpath
rmdef_null
rmdef_t_err
rpower_err_noderange
run_command_with_XCATBYPASS
rvitals_noderange_err
tabdump_d
tabdump_d_nodehm
tabdump_f_d
tabdump_h
tabdump_help
tabdump_table
tabdump_v
tabdump_w_equal
tabdump_w_ge
tabdump_w_gt
tabdump_w_le
tabdump_w_lt
tabdump_w_match
tabdump_w_ne
tabdump_w_notmatch
tabgrep_err
tabgrep_h
tabgrep_node
tabgrep_null
tabprune_V_a_eventlog
tabprune_V_n_auditlog
tabprune_a_eventlog
tabprune_h
tabprune_i_auditlog
tabprune_v
tabrestore_err
tabrestore_h
tabrestore_null
tabrestore_table
unregnotif_f
unregnotif_h
unregnotif_null
unregnotif_v
updatenode_diskful_syncfiles_failing
xcatconfig_c
xcatconfig_u_check_xcatsslversion_ubuntu
xcatd_restart
xcatd_start
xcatd_stop
xcatstanzafile_attribute
xcatstanzafile_colon
xcatstanzafile_defaultvalue
xcatstanzafile_multattr
xcatstanzafile_normal
xcatstanzafile_objtype
xcatstanzafile_specificvalue
xcatstanzafile_tab
xdcp_nonroot_user
xdsh_E
xdsh_Q_command
xdsh_T
xdsh_V
xdsh_c_cn
xdsh_e_filename
xdsh_h
xdsh_o
xdsh_permission_denied
xdsh_q
xdsh_regular_command
xdsh_t

16
xCAT-test/autotest/bundle/ubuntu_x86_weekly.bundle Normal file
View File

@ -0,0 +1,16 @@
#INCLUDE:ubuntu_x86_daily.bundle#
nodeset_cmdline
nodeset_runimg
nodeset_shell
packimage_imagename
packimage_m_cpio_c_gzip
packimage_m_cpio_c_pigz
packimage_m_cpio_c_xz
packimage_m_invalid_archive_method
packimage_m_invalid_compress_method
packimage_m_tar_c_gzip
packimage_m_tar_c_pigz
packimage_m_tar_c_xz
packimage_o_p_a_m
rmimage_diskless
ubuntu_migration2_vm

2
xCAT-test/autotest/testcase/chtab/cases0
View File

@ -79,7 +79,7 @@ description:chtab with error table
label:mn_only,ci_test,db
cmd:chtab error=error site.comment=error
check:rc!=0
check:output=~no such column|column \"error\" does not exist
check:output=~no such column|column \"error\" does not exist|Unknown column \'error\'
end

69
xCAT-test/autotest/testcase/commoncmd/retry_install.sh Executable file
View File

@ -0,0 +1,69 @@
#!/bin/bash
declare -i installsuccess=0
declare -i a=0
declare -i tryreinstall=1
node=$1
osimage=$2
if [ $# -eq 3 ];
then
times=$3+1
echo "Try to retry rinstall $3 times ......"
else
times=6
echo "Try to retry rinstall 5 times ......"
fi
for (( tryreinstall = 1 ; tryreinstall < $times ; ++tryreinstall ))
do
echo "Try to install $node on the $tryreinstall time..."
echo "rinstall $node osimage=$osimage"
rinstall $node osimage=$osimage
if [ $? != 0 ];then
echo "rinstall failed, double check xcat command rinstall to see if it is a bug..."
exit 1
fi
#sleep while for installation.
sleep 360
while [ ! `lsdef -l $node|grep status|grep booted` ]
do
sleep 10
echo "The status is not booted..."
a=++a
if [ $a -gt 400 ];then
a=0
break
fi
done
lsdef -l $node|grep status|grep booted
tobooted=$?
echo "The tobooted is $tobooted"
ping -c 2 $node
pingable=$?
echo "The pingable is $pingable"
xdsh $node date
canruncmd=$?
echo "The canruncmd is $canruncmd"
if [[ $canruncmd -eq 0 && $tobooted -eq 0 && $pingable -eq 0 ]];then
echo "The provision succeed on the $tryreinstall time....."
installsuccess=1
break
fi
done
if [ $installsuccess -eq 1 ];then
echo "The provision succeed......"
exit 0
else
echo "The provision failed......"
exit 1
fi

6
xCAT-test/autotest/testcase/confignetwork/cases0
View File

@ -22,7 +22,7 @@ cmd:copycds $$ISO
check:rc==0
cmd:chdef $$CN postscripts="confignetwork -s"
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 20;((a++));if [ $a -gt 300 ];then break;fi done
@ -70,7 +70,7 @@ cmd:genimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-comput
check:rc==0
cmd:packimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:sleep 180
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
@ -123,7 +123,7 @@ cmd:genimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-comput
check:rc==0
cmd:packimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:sleep 180
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done

28
xCAT-test/autotest/testcase/go_xcat/case0
View File

@ -18,9 +18,9 @@ check:rc==0
cmd:xdsh $$CN "cd /xcat-core; ./mklocalrepo.sh"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:if grep SUSE /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/zypp/repos.d/xCAT-core.repo -y install"; elif grep "Red Hat" /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/yum.repos.d/xCAT-core.repo -y install"; elif grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/apt/sources.list.d/xcat-core.list -y install";else echo "Sorry,this is not supported os"; fi
@ -57,9 +57,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; tar -jxf /xcat-core.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-core=/xcat-core -y install"
@ -96,9 +96,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; bunzip2 /xcat-core.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-core=/xcat-core.tar -y install"
@ -135,9 +135,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/xcat-dep*.tar.bz2 /xcat-dep.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-core=/xcat-core.tar.bz2 --xcat-dep=/xcat-dep.tar.bz2 -y install"
@ -182,9 +182,9 @@ check:rc==0
cmd:xdsh $$CN "cd /xcat-core; ./mklocalrepo.sh"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:if grep SUSE /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/zypp/repos.d/xCAT-core.repo --xcat-dep=/etc/zypp/repos.d/xCAT-dep.repo -y install"; elif grep "Red Hat" /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/yum.repos.d/xCAT-core.repo --xcat-dep=/etc/yum.repos.d/xCAT-dep.repo -y install"; elif grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=/etc/apt/sources.list.d/xcat-core.list --xcat-dep=/etc/apt/sources.list.d/xcat-dep.list -y install"; else echo "Sorry,this is not supported os"; fi
@ -225,9 +225,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; tar -jxf /xcat-core.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-core=/xcat-core --xcat-dep=/xcat-dep -y install"
@ -262,9 +262,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/xcat-dep*.tar.bz2 /xcat-dep.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-core=/xcat-core.tar.bz2 --xcat-dep=/xcat-dep.tar.bz2 -y install"

16
xCAT-test/autotest/testcase/go_xcat/case1
View File

@ -13,9 +13,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --yes install"
@ -48,9 +48,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:migration_version=`echo $$MIGRATION2_VERSION |cut -d "." -f -2`; xdsh $$CN "cd /; ./go-xcat -x $migration_version -y install"
@ -90,9 +90,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:xdsh $$CN "cd /; ./go-xcat --xcat-version=devel -y install"
@ -125,9 +125,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:migration_version=`echo $$MIGRATION2_VERSION |cut -d "." -f -2`; xdsh $$CN "cd /; ./go-xcat --xcat-version=$migration_version -y install"

16
xCAT-test/autotest/testcase/go_xcat/case2
View File

@ -43,9 +43,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/repos/apt/$$BRANCH/core-snap/";else xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/repos/yum/$$BRANCH/core-snap/ -y install"; fi
@ -79,9 +79,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/xcat-core/devel/Ubuntu/core-snap/core-debs-snap.tar.bz2";else xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/xcat-core/devel/Linux/core-snap/core-rpms-snap.tar.bz2 -y install"; fi
@ -147,9 +147,9 @@ cmd:xdsh $$CN "cd /; scp -r $$MN:/opt/xcat/share/xcat/tools/go-xcat ./"
check:rc==0
cmd:dir="__GETNODEATTR($$CN,os)__"; if grep SUSE /etc/*release;then os=`echo $dir |cut -c 1-6` && xdsh $$CN "cd /xcat-dep/$os/__GETNODEATTR($$CN,arch)__/; ./mklocalrepo.sh" ; elif grep "Red Hat" /etc/*release;then os=`echo $dir |cut -c 1-2` && xdsh $$CN "cd /xcat-dep/$os`echo __GETNODEATTR($$CN,os)__ | cut -c6`/__GETNODEATTR($$CN,arch)__/; ./mklocalrepo.sh"; elif grep Ubuntu /etc/*release;then xdsh $$CN "cd /xcat-dep; ./mklocalrepo.sh"; else echo "Sorry,this is not supported os"; fi
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/repos/apt/devel/core-snap/ --xcat-dep=http://xcat.org/files/xcat/repos/apt/xcat-dep/ -y install"; else xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/repos/yum/devel/core-snap/ --xcat-dep=http://xcat.org/files/xcat/repos/yum/xcat-dep/ -y install"; fi
@ -183,9 +183,9 @@ check:rc==0
cmd:cp /xcat-dep-*.tar.bz2 /install/
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:xdsh $$CN "rm -rf /tmp/go-xcat.log"
cmd:dep=`ls /install/xcat-dep-*.tar.bz2`;if grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/xcat-core/devel/Ubuntu/core-snap/core-debs-snap.tar.bz2 --xcat-dep=http://$$MN/$dep -y install"; else xdsh $$CN "cd /; ./go-xcat --xcat-core=http://xcat.org/files/xcat/xcat-core/devel/Linux/core-snap/core-rpms-snap.tar.bz2 --xcat-dep=http://$$MN/$dep -y install"; fi

4
xCAT-test/autotest/testcase/go_xcat/case4
View File

@ -16,9 +16,9 @@ check:rc==0
cmd:xdsh $$CN "cd /; scp -r $$MN:/xcat-dep*.tar.bz2 /xcat-dep.tar.bz2"
check:rc==0
cmd:if grep Ubuntu /etc/*release;then code=`lsb_release -sc` && xdsh $$CN "scp -r $$MN:/opt/xcat/share/xcat/tools/autotest/testcase/go_xcat/$code-__GETNODEATTR($$CN,arch)__.sources.list /etc/apt/sources.list"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "scp -r $$MN:/etc/hosts /etc/hosts" && xdsh $$CN "scp -r $$MN:/etc/resolv.conf /etc/resolv.conf" && xdsh $$CN "wget -O - http://xcat.org/files/xcat/repos/apt/apt.key | apt-key add -"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "apt-get clean && apt-get update"; fi
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "rm -rf /var/lib/apt/lists/* && apt-get clean && apt-get update"; fi
check:rc==0
cmd:if grep Ubuntu /etc/*release;then xdsh $$CN "cd /; ./go-xcat --xcat-core=$$UBUNTU_MIGRATION2_CORE --xcat-dep=$$UBUNTU_MIGRATION2_DEP -y install";else xdsh $$CN "cd /; ./go-xcat -x $$MIGRATION1_VERSION -y install";fi
check:rc==0

7
xCAT-test/autotest/testcase/installation/SN_diskless_setup_case
View File

@ -84,7 +84,7 @@ cmd:rm -rf /tmp/mountoutput
cmd:packimage __GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-netboot-service
check:rc==0
cmd:rinstall $$SN osimage=__GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-netboot-service
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$SN __GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-netboot-service
check:rc==0
check:output=~Provision node\(s\)\: $$SN
@ -107,6 +107,11 @@ check:output=~\d\d:\d\d:\d\d
cmd:xdsh $$SN mount
check:rc==0
check:output=~on / type tmpfs
cmd:xdsh $$SN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$SN
check:output=~IMAGENAME='__GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-netboot-service'
check:output=~IMAGEUUID='\w+-\w+-\w+-\w+-\w+'
cmd:xdsh $$SN rpm -qa|grep "xCAT-openbmc-py"
check:rc==0
check:output=~xCAT-openbmc-py-\d

6
xCAT-test/autotest/testcase/installation/SN_setup_case
View File

@ -57,7 +57,7 @@ check:rc==0
#cmd:chdef -t osimage __GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-install-service pkgdir="/install/__GETNODEATTR($$SN,os)__/__GETNODEATTR($$SN,arch)__"
#check:rc==0
cmd:rinstall $$SN osimage=__GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-install-service
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$SN __GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-install-service
check:rc==0
check:output=~Provision node\(s\)\: $$SN
@ -91,6 +91,10 @@ check:output=~/install on /install
cmd:xdsh $$SN "mount"
check:rc==0
check:output=~/tftpboot on /tftpboot
cmd:xdsh $$SN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$SN
check:output=~IMAGENAME=__GETNODEATTR($$SN,os)__-__GETNODEATTR($$SN,arch)__-install-service
cmd:xdsh $$SN "cat /var/log/xcat/xcat.log"
cmd:if [[ "__GETNODEATTR($$SN,arch)__" =~ "x86_64" ]]; then if [[ "__GETNODEATTR($$SN,os)__" =~ "sles" ]];then xdsh $$SN "zypper -n install perl-Sys-Virt"; elif [[ "__GETNODEATTR($$SN,os)__" =~ "rh" ]];then xdsh $$SN "yum install -y perl-Sys-Virt";fi;fi
check:rc==0

11
xCAT-test/autotest/testcase/installation/reg_linux_diskfull_installation_flat
View File

@ -7,7 +7,8 @@ cmd:df -T
cmd:if ping -c 1 $$SN > /dev/null;then rpower $$SN off > /dev/null;fi
cmd:MINIISO=NUll;if [[ "__GETNODEATTR($$CN,os)__" =~ "ubuntu" ]] && [[ "__GETNODEATTR($$CN,arch)__" =~ "ppc64" ]];then mkdir /tmp/iso; mount -o loop $$MINIISO /tmp/iso ; mkdir -p /install/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/install/netboot; cp /tmp/iso/install/initrd.gz /install/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/install/netboot;umount /tmp/iso; rmdir /tmp/iso; fi
check:rc==0
cmd: if lsdef service > /dev/null 2>&1; then chdef service -m groups=service;fi
check:rc==0
cmd:chdef -t node -o $$CN servicenode= monserver=$$MN nfsserver=$$MN tftpserver=$$MN xcatmaster=$$MN
check:rc==0
cmd:makedns -n
@ -41,12 +42,10 @@ cmd:if ! ([[ "__GETNODEATTR($$CN,os)__" = "sles12.1" ]] || [[ "__GETNODEATTR($$C
check:rc==0
cmd:lsdef -l $$CN
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 20;((a++));if [ $a -gt 300 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
check:output=~64 bytes from $$CN
@ -58,6 +57,10 @@ check:rc==0
check:output=~\d\d:\d\d:\d\d
cmd:xdsh $$CN mount
check:rc==0
cmd:xdsh $$CN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$CN
check:output=~IMAGENAME=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:sleep 120
#comment for further discussion
#cmd:if ! ([[ "__GETNODEATTR($$CN,os)__" = "sles12.1" ]] || [[ "__GETNODEATTR($$CN,os)__" =~ "ubuntu" && "__GETNODEATTR($$CN,arch)__" = "x86_64" ]]) ;then xdsh $$CN service ntpd status;fi

9
xCAT-test/autotest/testcase/installation/reg_linux_diskfull_installation_hierarchy
View File

@ -42,7 +42,7 @@ cmd:nodeset $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-ins
check:rc==0
cmd:updatenode $$CN -f
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
@ -53,8 +53,6 @@ cmd:if [[ "__GETNODEATTR($$CN,arch)__" =~ "ppc" ]]; then sleep 120;elif [[ "__GE
#check:rc==0
#check:output!~booted
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 60;((a++));if [ $a -gt 50 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
check:output=~64 bytes from $$CN
@ -66,6 +64,11 @@ check:rc==0
check:output=~\d\d:\d\d:\d\d
cmd:xdsh $$CN mount
check:rc==0
cmd:xdsh $$CN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$CN
check:output=~IMAGENAME=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:output=~SERVICEGROUP=$$SN
cmd:xdsh $$CN "cat /var/log/xcat/xcat.log"
cmd:xdsh $$CN "cat /test.synclist"
check:rc==0

11
xCAT-test/autotest/testcase/installation/reg_linux_diskless_installation_flat
View File

@ -4,6 +4,8 @@ label:flat_cn_diskless,provision
#stop:yes
cmd:fdisk -l
cmd:df -T
cmd: if lsdef service > /dev/null 2>&1; then chdef service -m groups=service;fi
check:rc==0
cmd:chdef -t node -o $$CN servicenode= monserver=$$MN nfsserver=$$MN tftpserver=$$MN xcatmaster=$$MN
check:rc==0
@ -43,13 +45,11 @@ cmd:rm -rf /tmp/mountoutput
cmd:packimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
@ -63,6 +63,11 @@ check:output=~\d\d:\d\d:\d\d
cmd:xdsh $$CN mount
check:rc==0
check:output=~on / type tmpfs
cmd:xdsh $$CN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$CN
check:output=~IMAGENAME='__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute'
check:output=~IMAGEUUID='\w+-\w+-\w+-\w+-\w+'
cmd:sleep 120
cmd:ping $$CN -c 3
check:rc==0

10
xCAT-test/autotest/testcase/installation/reg_linux_diskless_installation_hierarchy
View File

@ -49,13 +49,11 @@ check:rc==0
cmd:updatenode $$CN -f
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:xdsh $$SN "if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi"
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
@ -69,6 +67,12 @@ check:output=~\d\d:\d\d:\d\d
cmd:xdsh $$CN mount
check:rc==0
check:output=~on / type tmpfs
cmd:xdsh $$CN cat /opt/xcat/xcatinfo
check:rc==0
check:output=~NODE=$$CN
check:output=~IMAGENAME='__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute'
check:output=~IMAGEUUID='\w+-\w+-\w+-\w+-\w+'
check:output=~SERVICEGROUP=$$SN
cmd:xdsh $$CN "cat /var/log/xcat/xcat.log"
cmd:rootimgdir=`lsdef -t osimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute|grep rootimgdir|awk -F'=' '{print $2}'`; if [ -d $rootimgdir.regbak ]; then rm -rf $rootimgdir; mv $rootimgdir.regbak $rootimgdir; fi
check:rc==0

14
xCAT-test/autotest/testcase/installation/reg_linux_statelite_installation_flat
View File

@ -4,7 +4,8 @@ label:others,provision,statelite
#stop:yes
cmd:fdisk -l
cmd:df -T
cmd: if lsdef service > /dev/null 2>&1; then chdef service -m groups=service;fi
check:rc==0
cmd:chdef -t node -o $$CN servicenode= monserver=$$MN nfsserver=$$MN tftpserver=$$MN xcatmaster=$$MN
check:rc==0
@ -50,19 +51,18 @@ check:rc==0
cmd:rootimgdir=`lsdef -t osimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute|grep rootimgdir|awk -F'=' '{print $2}'`; if [ -d $rootimgdir ]; then mv $rootimgdir $rootimgdir.regbak;fi
check:rc==0
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute rootfstype=nfs
check:rc==0
cmd:genimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
cmd:liteimg __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
check:output=~64 bytes from $$CN
@ -93,13 +93,11 @@ check:rc==0
cmd:liteimg __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0

4
xCAT-test/autotest/testcase/installation/reg_linux_statelite_installation_hierarchy_by_nfs
View File

@ -75,13 +75,11 @@ check:rc==0
cmd:prsync /install $$SN:/
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:xdsh $$SN "if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi"
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0

4
xCAT-test/autotest/testcase/installation/reg_linux_statelite_installation_hierarchy_by_ramdisk
View File

@ -69,13 +69,11 @@ cmd:prsync /install $$SN:/
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-statelite-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:xdsh $$SN "if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi"
cmd:sleep 300
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 60 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0

2
xCAT-test/autotest/testcase/installation/ubuntu_full_installation_vm_docker
View File

@ -21,7 +21,7 @@ cmd:if [[ "__GETNODEATTR($$CN,os)__" =~ "ubuntu14.04" ]];then ver=`cat /etc/*-re
check:rc==0
cmd: chdef $$CN -p postbootscripts="setupdockerhost mynet0=$$MYNET0VALUE@$$DOCKERHOSIP:$$NICNAME"
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-dockerhost
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-dockerhost
check:rc==0
check:output=~Provision node\(s\)\: $$CN

2
xCAT-test/autotest/testcase/lsdef/cases0
View File

@ -214,6 +214,7 @@ end
start:lsdef_nics
description:lsdef --nics
label:mn_only,ci_test,db
cmd:lsdef testnode1;if [ $? -eq 0 ]; then lsdef -l testnode1 -z >/tmp/testnode1.standa ; rmdef testnode1;fi
cmd:mkdef -t node -o testnode1 groups=all mgt=ipmi nicips.eth0=1.1.1.1
check:rc==0
cmd:lsdef testnode1 --nics
@ -223,6 +224,7 @@ cmd:rmdef testnode1
check:rc==0
cmd:lsdef testnode1
check:output=~Could not find
cmd:if [ -e /tmp/testnode1.standa ]; then cat /tmp/testnode1.standa | mkdef -z; rm -rf /tmp/testnode1.standa; fi
end
start:lsdef_template

3
xCAT-test/autotest/testcase/makedhcp/cases0
View File

@ -194,6 +194,7 @@ end
start:makedhcp_remote_network
descriptiion:This case is to test when there is mgtifname='!remote!<nicname>', makedhcp could work correctly and create entrys in dhcp lease file.
os:linux
stop:yes
label:mn_only,dhcp
cmd:mkdef -t network -o testnetwork net=100.100.100.0 mask=255.255.255.0 mgtifname='!remote!eth0' gateway=100.100.100.1
check:rc==0
@ -213,7 +214,7 @@ cmd:if [ -f /var/lib/dhcpd/dhcpd.leases ]; then a="/var/lib/dhcpd/dhcpd.leases";
cmd:makedhcp testnode
check:rc==0
cmd:if [ -f /var/lib/dhcpd/dhcpd.leases ]; then a="/var/lib/dhcpd/dhcpd.leases"; elif [ -f /var/lib/dhcp/db/dhcpd.leases ]; then a="/var/lib/dhcp/db/dhcpd.leases"; elif [ -f "/var/lib/dhcp/dhcpd.leases" ]; then a="/var/lib/dhcp/dhcpd.leases";fi; ls -l $a; cat $a
cmd:makedhcp -q testnode
cmd:a=2;while true; do [ $a -eq 64 ] && exit 1;output=$(makedhcp -q testnode);[ $? -ne 0 ] && exit 1;echo $output|grep testnode 2>/dev/null && exit 0;a=$[$a*2]; makedhcp testnode; sleep $a;done
check:rc==0
check:output=~testnode: ip-address = 100.100.100.2
cmd:makedhcp -d testnode

100
xCAT-test/autotest/testcase/makehosts/cases0
View File

@ -141,6 +141,7 @@ start:makehost_n_r
label:mn_only,dns,wait_fix
descriptions:modify makehosts testcases according to special node name eg:s01 and s01r* . for issue #2717 and #2683
cmd:cp -f /etc/hosts /etc/hosts.xcatbakautotest
cmd:sed -i '/s01/d' /etc/hosts
cmd:cat /etc/hosts
cmd:lsdef s01;if [ $? -eq 0 ]; then lsdef -l s01 -z >/tmp/s01.standa ;rmdef s01;fi
check:rc==0
@ -149,56 +150,65 @@ check:rc==0
cmd:nodeadd s01 groups=service; chdef s01 ip=70.2.0.254;nodeadd s01r1b01 groups=compute; chdef s01r1b01 ip=80.2.0.254
check:rc==0
cmd:lsdef -l s01,s01r1b01
cmd:makehosts
cmd:makehosts
check:rc==0
cmd:cat /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && (grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0;
else
echo "Do not find s01 and s01r1b01 in $file, sleep $[i*2] seconds and try again"
sleep $[i*2]
fi
done
exit 1
if (! grep "s01" $file 2>&1); then
echo "makehosts failed, try XCATBYPASS=YES makehosts again"
XCATBYPASS=YES makehosts
if (! grep "s01" $file 2>&1); then
echo "XCATBYPASS=YES makehosts failed either"
exit 1
fi
fi
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && (grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0
else
exit 1
fi
check:rc==0
cmd:cp -f /etc/hosts.xcatbakautotest /etc/hosts
cmd:makehosts s01
cmd:sed -i '/s01/d' /etc/hosts
cmd:makehosts s01
check:rc==0
cmd:cat /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && ( ! grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0;
else
echo "sleep $[i*2] seconds and try again"
sleep $[i*2]
if (! grep "s01 " $file 2>&1); then
echo "makehosts s01 failed, try XCATBYPASS=YES makehosts s01 again"
XCATBYPASS=YES makehosts s01
if (! grep "s01 " $file 2>&1); then
echo "XCATBYPASS=YES makehosts s01 failed either"
exit 1
fi
done
exit 1
fi
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && ( ! grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0;
else
exit 1
fi
check:rc==0
cmd:cp -f /etc/hosts.xcatbakautotest /etc/hosts
cmd:makehosts service
cmd:sed -i '/s01/d' /etc/hosts
cmd:makehosts service
check:rc==0
cmd:cat /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && (! grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0;
else
echo "sleep $[i*2] seconds and try again"
sleep $[i*2]
fi
done
exit 1
if (! grep "s01 " $file 2>&1); then
echo "makehosts service failed, try XCATBYPASS=YES makehosts service again"
XCATBYPASS=YES makehosts service
if (! grep "s01 " $file 2>&1); then
echo "XCATBYPASS=YES makehosts service failed either"
exit 1
fi
fi
if (grep "70.2.0.254 s01" $file >/dev/null 2>&1) && (! grep "80.2.0.254 s01r1b01" $file >/dev/null 2>&1); then
exit 0;
else
exit 1
fi
check:rc==0
cmd:makehosts -d s01
check:rc==0
cmd:cat /etc/hosts
cmd:grep "s01" /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do
@ -211,13 +221,14 @@ for i in {1..5}; do
done
exit 1
check:rc==0
cmd:cp -f /etc/hosts.xcatbakautotest /etc/hosts
cmd:makehosts
cmd:sed -i '/s01/d' /etc/hosts
cmd:domain=$(lsdef -t site -i domain -c |awk -F'=' '{print $2}'); echo "70.2.0.254 s01 s01.$domain" >> /etc/hosts; echo "80.2.0.254 s01r1b01 s01r1b01.$domain" >> /etc/hosts
check:rc==0
cmd:cat /etc/hosts
cmd:makehosts -d service
cmd:grep "s01" /etc/hosts
check:rc==0
cmd:cat /etc/hosts
cmd:makehosts -d service
check:rc==0
cmd:grep "s01" /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do
@ -230,13 +241,14 @@ for i in {1..5}; do
done
exit 1
check:rc==0
cmd:cp -f /etc/hosts.xcatbakautotest /etc/hosts
cmd:makehosts
cmd:sed -i '/s01/d' /etc/hosts
cmd:domain=$(lsdef -t site -i domain -c |awk -F'=' '{print $2}'); echo "70.2.0.254 s01 s01.$domain" >> /etc/hosts; echo "80.2.0.254 s01r1b01 s01r1b01.$domain" >> /etc/hosts
check:rc==0
cmd:grep "s01" /etc/hosts
check:rc==0
cmd:cat /etc/hosts
cmd:makehosts -d s01r1b01
check:rc==0
cmd:cat /etc/hosts
cmd:grep "s01" /etc/hosts
cmd:#!/bin/bash
file="/etc/hosts"
for i in {1..5}; do

4
xCAT-test/autotest/testcase/migration/redhat_migration
View File

@ -32,7 +32,7 @@ cmd:if cat /etc/*release |grep SUSE >/dev/null;then cat /var/lib/dhcp/db/dhcpd.l
check:output=~$$CN
cmd:copycds $$ISO
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600
@ -140,7 +140,7 @@ cmd:if cat /etc/*release |grep SUSE >/dev/null;then cat /var/lib/dhcp/db/dhcpd.l
check:output=~$$CN
cmd:copycds $$ISO
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600

4
xCAT-test/autotest/testcase/migration/sles_migration
View File

@ -31,7 +31,7 @@ cmd:if cat /etc/*release |grep SUSE >/dev/null;then cat /var/lib/dhcp/db/dhcpd.l
check:output=~$$CN
cmd:copycds $$ISO
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600
@ -152,7 +152,7 @@ cmd:if cat /etc/*release |grep SUSE >/dev/null;then cat /var/lib/dhcp/db/dhcpd.l
check:output=~$$CN
cmd:copycds $$ISO
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600

2
xCAT-test/autotest/testcase/migration/ubuntu_migration1_p8le
View File

@ -17,7 +17,7 @@ cmd:makeconservercf $$CN
check:rc==0
cmd:cat /etc/conserver.cf | grep $$CN
check:output=~$$CN
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600

2
xCAT-test/autotest/testcase/migration/ubuntu_migration1_vm
View File

@ -16,7 +16,7 @@ cmd:makeconservercf $$CN
check:rc==0
cmd:cat /etc/conserver.cf | grep $$CN
check:output=~$$CN
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600

2
xCAT-test/autotest/testcase/migration/ubuntu_migration2_p8le
View File

@ -17,7 +17,7 @@ cmd:makeconservercf $$CN
check:rc==0
cmd:cat /etc/conserver.cf | grep $$CN
check:output=~$$CN
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 300

2
xCAT-test/autotest/testcase/migration/ubuntu_migration2_vm
View File

@ -16,7 +16,7 @@ cmd:makeconservercf $$CN
check:rc==0
cmd:cat /etc/conserver.cf | grep $$CN
check:output=~$$CN
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:sleep 600

33
xCAT-test/autotest/testcase/nodeset/cases2 Normal file
View File

@ -0,0 +1,33 @@
start:nodeset_prescripts
description:This case is to run test for prescripts actions. This test case should be tested on an provisioned compute node.
os:Linux
label:others
cmd:dir="/install/prescripts/";if [ ! -e "${dir}" ];then mkdir -p $dir; fi
cmd:echo "echo all" >> /install/prescripts/test_prescripts_all.sh;chmod a+x /install/prescripts/test_prescripts_all.sh
check:rc==0
cmd:echo "echo boot" >> /install/prescripts/test_prescripts_boot.sh;chmod a+x /install/prescripts/test_prescripts_boot.sh
check:rc==0
cmd:echo "echo osimage" >> /install/prescripts/test_prescripts_osimage.sh;chmod a+x /install/prescripts/test_prescripts_osimage.sh
check:rc==0
cmd:pre=`lsdef -l $$CN |grep prescripts-begin|awk -F= '{print $2}'`;echo $pre >> /tmp/prescriptssave;chdef $$CN prescripts-begin="test_prescripts_all.sh|boot:test_prescripts_boot.sh|osimage:test_prescripts_osimage.sh"
check:rc==0
cmd:nodeset $$CN install
check:output=~Running begin script test_prescripts_all.sh for nodes $$CN
check:output!=~test_prescripts_boot.sh
check:output!=~test_prescripts_osimage.sh
cmd:nodeset $$CN boot
check:rc==0
check:output=~Running begin script test_prescripts_all.sh for nodes $$CN
check:output=~Running begin script test_prescripts_boot.sh for nodes $$CN
check:output!=~test_prescripts_osimage.sh
cmd:nodeset $$CN osimage
check:rc==0
check:output=~Running begin script test_prescripts_all.sh for nodes $$CN
check:output=~Running begin script test_prescripts_osimage.sh for nodes $$CN
check:output!=~test_prescripts_boot.sh
cmd:rm -rf /install/prescripts/test_prescripts_all.sh /install/prescripts/test_prescripts_boot.sh /install/prescripts/test_prescripts_osimage.sh
cmd:pre=`cat /tmp/prescriptssave`;chdef $$CN prescripts-begin=$pre
check:rc==0
cmd:rm -rf /tmp/prescriptssave
end

44
xCAT-test/autotest/testcase/packimg/cases0
View File

@ -72,9 +72,7 @@ check:output=~archive method:cpio
check:output=~compress method:gzip
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz
check:rc==0
cmd:nodeset $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:if [[ "__GETNODEATTR($$CN,arch)__" = "ppc64" ]]; then rnetboot $$CN;else rpower $$CN boot; fi
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
cmd:ping $$CN -c 3
@ -118,9 +116,7 @@ check:output=~archive method:cpio
check:output=~compress method:pigz
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz
check:rc==0
cmd:nodeset $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:if [[ "__GETNODEATTR($$CN,arch)__" = "ppc64" ]]; then rnetboot $$CN;else rpower $$CN boot; fi
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
cmd:ping $$CN -c 3
@ -160,9 +156,7 @@ check:output=~archive method:cpio
check:output=~compress method:xz
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.xz
check:rc==0
cmd:nodeset $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:if [[ "__GETNODEATTR($$CN,arch)__" = "ppc64" ]]; then rnetboot $$CN;else rpower $$CN boot; fi
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
cmd:ping $$CN -c 3
@ -206,7 +200,7 @@ check:output=~archive method:tar
check:output=~compress method:pigz
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.tar.gz
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
@ -257,7 +251,7 @@ check:output=~archive method:tar
check:output=~compress method:gzip
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.tar.gz
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
@ -308,7 +302,7 @@ check:output=~archive method:tar
check:output=~compress method:xz
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.tar.xz
check:rc==0
cmd:rinstall $$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/commoncmd/retry_install.sh $$CN __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
check:output=~Provision node\(s\)\: $$CN
cmd:a=0;while ! `lsdef -l $$CN|grep status|grep booted >/dev/null`; do sleep 10;((a++));if [ $a -gt 150 ];then break;fi done
@ -376,3 +370,29 @@ cmd:rm -rf /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/
cmd:mv -f /rootimg.bak /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg
end
start:packimage_uuid
os:Linux
description:this case is to verfy bug 3542,ensure that CSM required info is not removed from /opt/xcat/xcatinfo.
label:others,packaging
cmd:lsdef -z $$CN >> /tmp/node.stanza
cmd:ls /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg;if [ $? -eq 0 ];then mv -f /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg /rootimg.bak;fi
cmd:ls /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz;if [ $? -eq 0 ];then mv -f /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz /rootimg.cpio.gz.bak;fi
cmd:copycds $$ISO
cmd:genimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:packimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:cp /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg/opt/xcat/xcatinfo /tmp/uuid
cmd:packimage __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-netboot-compute
check:rc==0
cmd:uuid=`cat /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg/opt/xcat/xcatinfo |grep UUID|awk -F= '{print $2}'`;grep $uuid /tmp/uuid
check:rc!=0
cmd:ls -l /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz
check:rc==0
cmd:rm -rf /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz
cmd:mv -f /rootimg.cpio.gz.bak /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg.cpio.gz
cmd:rm -rf /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg
cmd:mv -f /rootimg.bak /install/netboot/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/compute/rootimg
cmd:if [ -e /tmp/node.stanza ]; then rmdef $$CN; cat /tmp/node.stanza | mkdef -z; rm -rf /tmp/node.stanza; fi
end

25
xCAT-test/autotest/testcase/rflash/rflash_openbmc.0
View File

@ -524,3 +524,28 @@ check:rc != 0
check:output =~~$$CN\s*:\s*(\[.*?\]: )?Error: Deleting currently active BMC firmware is not supported
end
start:rflash_d_relative_path
description:this case is to check if -d support relative directory path. This case is for issue 4511.
os:Linux
hcp:openbmc
label:cn_bmc_ready,hctrl_openbmc
cmd:lsdef testnode;if [ $? -eq 0 ]; then lsdef -l testnode -z >/tmp/testnode.standa ; rmdef testnode;fi
cmd:mkdef -t node -o testnode groups=all arch=ppc64le bmc=testnode-bmc bmcvlantag=11 cons=openbmc mgt=openbmc
check:rc == 0
cmd:dir="/tmp/rflashdir";if [ -e "${dir}" ];then mv ${dir} ${dir}".bak"; fi
cmd:mkdir -p /tmp/rflashdir;touch /tmp/rflashdir/witherspoon.pnor.squashfs.tar
cmd:cd /tmp;rflash testnode ./rflashdir -d
check:rc != 0
check:output =~Error:\s*\[.*?\]:\s*No BMC tar file found in ./rflashdir
check:output =~Error:\s*\[.*?\]:\s*No Host tar file found in ./rflashdir
check:output =~testnode\s*:\s*Error:\s*Unable to resolved ip address for bmc:\s*testnode-bmc
cmd:dir="/tmp/rflashnotexist/";if [ -e "${dir}" ];then mv ${dir} ${dir}".bak"; fi
cmd:cd /tmp;rflash testnode ./rflashnotexist -d
check:rc != 0
check:output =~testnode\s*:\s*Error:\s*Invalid option specified with -d:\s*./rflashnotexist
cmd:dir="/tmp/rflashnotexist"; if [ -d ${dir}".bak" ];then mv ${dir}".bak" $dir; fi
cmd:dir="/tmp/rflashdir"; if [ -d ${dir}".bak" ];then mv ${dir}".bak" $dir; fi
cmd:rmdef -t node -o testnode
check:rc == 0
cmd:if [ -e /tmp/testnode.standa ]; then cat /tmp/testnode.standa | mkdef -z; rm -rf /tmp/testnode.standa; fi
end

4
xCAT-test/autotest/testcase/rmdef/cases0
View File

@ -88,6 +88,8 @@ end
start:rmdef_dynamic_group
description:rmdef to remove dynamic node group
label:mn_only,ci_test,db
cmd:lsdef testnode1;if [ $? -eq 0 ]; then lsdef -l testnode1 -z >/tmp/testnode1.standa ; rmdef testnode1;fi
cmd:lsdef testnode2;if [ $? -eq 0 ]; then lsdef -l testnode2 -z >/tmp/testnode2.standa ; rmdef testnode2;fi
cmd:mkdef -t node -o testnode1-testnode2 mgt=hmc cons=hmc groups=all,systemp
check:rc==0
cmd:mkdef -t group -o dyngrp -d -w mgt==hmc -w cons==hmc -w groups==all,systemp
@ -105,6 +107,8 @@ cmd:rmdef -t group -o dyngrp
check:rc==0
cmd:lsdef -t group -o dyngrp
check:output=~Could not find an object named 'dyngrp' of type 'group'.
cmd:if [ -e /tmp/testnode1.standa ]; then cat /tmp/testnode1.standa | mkdef -z; rm -rf /tmp/testnode1.standa; fi
cmd:if [ -e /tmp/testnode2.standa ]; then cat /tmp/testnode2.standa | mkdef -z; rm -rf /tmp/testnode2.standa; fi
end
#start:rmdef_f_all

152
xCAT-test/autotest/testcase/updatenode/cases0
View File

@ -166,23 +166,33 @@ end
start:updatenode_syncfile_EXECUTE
label:others,updatenode
cmd:echo "echo hello > /tmp/test" > /tmp/file.post
cmd:mkdir -p /tmp/updatenode_syncfile_EXECUTE/
check:rc==0
cmd:chmod a+x /tmp/file.post
cmd:echo "/tmp/file.post -> /tmp/file.post" > /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "EXECUTE:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=/install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:touch /tmp/updatenode_syncfile_EXECUTE/file
check:rc==0
cmd:echo "echo hello > /tmp/test" > /tmp/updatenode_syncfile_EXECUTE/file.post
check:rc==0
cmd:chmod a+x /tmp/updatenode_syncfile_EXECUTE/file.post
cmd:echo "/tmp/updatenode_syncfile_EXECUTE/file -> /tmp/file" > /tmp/updatenode_syncfile_EXECUTE/synclist
cmd:echo "EXECUTE:" >> /tmp/updatenode_syncfile_EXECUTE/synclist
cmd:echo "/tmp/updatenode_syncfile_EXECUTE/file.post" >> /tmp/updatenode_syncfile_EXECUTE/synclist
cmd:chdef -t osimage -o __GETNODEATTR($$CN,provmethod)__ synclists=/tmp/updatenode_syncfile_EXECUTE/synclist
check:rc==0
cmd:updatenode $$CN -F
check:rc==0
cmd:xdsh $$CN "cat /tmp/test"
check:rc==0
check:output=~hello
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=
cmd:xdsh $$CN "rm -rf /tmp/test"
cmd:updatenode $$CN -F
check:rc==0
cmd:rm -rf /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:xdsh $$CN "cat /tmp/test"
check:rc!=0
check:output=~No such file or directory
cmd:xdsh $$CN "rm -rf /tmp/test"
cmd:chdef -t osimage -o __GETNODEATTR($$CN,provmethod)__ synclists=
check:rc==0
cmd:rm -rf /tmp/updatenode_syncfile_EXECUTE/
end
start:updatenode_syncfile_EXECUTEALWAYS
@ -525,3 +535,129 @@ cmd:chtab key=xcatdebugmode site.value=0
check:rc==0
end
start:updatenode_syncfile_EXECUTE_EXECUTEALWAYS_noderange
label:others,updatenode
description:this teast case is to verify pr #5834. This test case should be executed on mn with hierarchy environment, with 2 comput nodes.In this case, $$CN and $$C2 are the 2 compute nodes.
cmd:xdsh $$CN,$$C2 rm /tmp/file.post1 /tmp/file.post2
cmd:xdsh $$CN,$$C2 rm /tmp/test1 /tmp/test2
cmd:echo "echo hello1 >> /tmp/test1" > /tmp/file.post1
check:rc==0
cmd:echo "echo hello2 >> /tmp/test2" > /tmp/file.post2
check:rc==0
cmd:chmod a+x /tmp/file.post1 /tmp/file.post2
cmd:mkdir -p /install/custom/install/__GETNODEATTR($$CN,os)__
cmd:echo "/tmp/file.post1 -> ($$CN) /tmp/file.post1" > /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post2 -> ($$C2) /tmp/file.post2" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "EXECUTE:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post1" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "EXECUTEALWAYS:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post2" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=/install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
check:rc==0
cmd:updatenode $$CN -F
check:output=~File synchronization has completed
check:rc==0
cmd:xdsh $$CN "cat /tmp/test1"
check:rc==0
check:output=~hello1
cmd:xdsh $$CN "rm -rf /tmp/test1"
check:rc==0
cmd:updatenode $$CN -F
check:output=~File synchronization has completed
check:rc==0
cmd:xdsh $$CN "cat /tmp/test1"
check:rc!=0
cmd:updatenode $$C2 -F
check:output=~File synchronization has completed
check:rc==0
cmd:xdsh $$C2 ls /tmp/file.post2
check:rc==0
cmd:xdsh $$C2 "cat /tmp/test2"
check:rc==0
check:output=~hello2
cmd:xdsh $$C2 "rm -rf /tmp/test2"
check:rc==0
cmd:updatenode $$C2 -F
check:output=~File synchronization has completed
check:rc==0
cmd:xdsh $$C2 ls /tmp/file.post2
check:rc==0
cmd:xdsh $$C2 "cat /tmp/test2"
check:rc==0
check:output=~hello2
cmd:xdsh $$C2 rm -rf /tmp/file.post2 /tmp/test2
cmd:rm -rf /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post1 -> ($$CN) /tmp/file.post1" > /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post1 -> ($$C2) /tmp/file.post1" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "EXECUTE:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post1" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "EXECUTEALWAYS:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:echo "/tmp/file.post2" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=/install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
check:rc==0
cmd:updatenode $$C2 -F
check:output=~File synchronization has completed
check:rc==0
cmd:xdsh $$C2 ls /tmp/file.post2
check:rc!=0
cmd:xdsh $$C2 "cat /tmp/test2"
check:rc!=0
check:output!=~hello2
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=
check:rc==0
cmd:rm -rf /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.synclist
check:rc==0
end
start:updatenode_syncfile_EXECUTEALWAYS_src_dst_diff
label:others,updatenode
description:this teast case is to verify pr #5888.
cmd:lsdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute -z >> /tmp/myimage.stanza
cmd:xdsh $$CN rm /tmp/h /tmp/script.sh /root/script2.sh /tmp/script2.sh /tmp/script3.sh
cmd:xdsh $$CN rm /tmp/test /tmp/test2 /root/test3 /root/test1
cmd:echo "echo hello >> /tmp/test" > /tmp/script.sh
check:rc==0
cmd:echo "echo hello2 >> /tmp/test2" > /tmp/script2.sh
check:rc==0
cmd:echo "echo hello3 >> /tmp/test3" > /root/script3.sh
check:rc==0
cmd:echo "echo hello1 >> /tmp/test1" > /root/script1.sh
check:rc==0
cmd:chmod a+x /tmp/script.sh /tmp/script2.sh /root/script3.sh /root/script1.sh
cmd:mkdir -p /install/custom/install/__GETNODEATTR($$CN,os)__
cmd:echo "/etc/hosts -> ($$CN) /tmp/h" > /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/tmp/script.sh -> ($$CN) /tmp/script.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/root/script1.sh -> ($$CN) /root/script2.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/tmp/script2.sh -> ($$CN) /tmp/script2.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/root/script3.sh -> ($$CN) /tmp/script3.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "EXECUTEALWAYS:" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/tmp/script.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/tmp/script2.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/root/script3.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:echo "/root/script1.sh" >> /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
cmd:chdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute synclists=/install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
check:rc==0
cmd:updatenode $$CN -F
check:output=~File synchronization has completed for nodes:\s*"$$CN"\s*
check:rc==0
cmd:xdsh $$CN ls /tmp/h
check:rc==0
cmd:xdsh $$CN ls /tmp/test
check:rc==0
cmd:xdsh $$CN ls /tmp/test2
check:rc==0
cmd:xdsh $$CN ls /tmp/test3
check:rc==0
cmd:xdsh $$CN ls /tmp/test1
check:rc==0
cmd:if [ -e /tmp/myimage.stanza ]; then rmdef -t osimage -o __GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute; cat /tmp/myimage.stanza | mkdef -z; rm -rf /tmp/myimage.stanza; fi
check:rc==0
cmd:rm -rf /install/custom/install/__GETNODEATTR($$CN,os)__/compute.$$OS.srcdstdiff.synclist
check:rc==0
end

7
xCAT-test/autotest/testcase/xcat_inventory/cases.osimage
View File

@ -1040,6 +1040,8 @@ cmd:dir="/opt/inventory/site/osimage";if [ -e "${dir}" ];then mv ${dir} ${dir}".
cmd:xcat-inventory export -t osimage -o test_myimage1,test_myimage2 --format json -d /opt/inventory/site/osimage
check:rc==0
check:output=~The osimage objects has been exported to directory /opt/inventory/site/osimage
cmd: ls -R /opt/inventory/site/osimage
check: output =~ site
cmd:otherpkglist=`lsdef -t osimage -o test_myimage1 |grep otherpkglist|awk -F= '{print $2}'`;diff -y $otherpkglist /opt/inventory/site/osimage/test_myimage1$otherpkglist
check:rc==0
cmd:synclists=`lsdef -t osimage -o test_myimage1 |grep synclists|awk -F= '{print $2}'`;diff -y $synclists /opt/inventory/site/osimage/test_myimage1$synclists
@ -1071,8 +1073,9 @@ check:rc==0
cmd: rmdef -t osimage -o test_myimage1,test_myimage2
check:rc==0
cmd:rm -rf /tmp/otherpkglist /tmp/synclists /tmp/postinstall /tmp/exlist /tmp/partitionfile /tmp/pkglist /tmp/template
cmd: tree /opt/inventory/site
cmd:xcat-inventory import -t osimage -o test_myimage1,test_myimage2 -d /opt/inventory/site
cmd: ls -R /opt/inventory/site
check: output =~ site
cmd:xcat-inventory import -t osimage -o test_myimage1,test_myimage2 -d /opt/inventory/site/osimage
check:rc==0
check:output=~The object test_myimage1 has been imported
check:output=~The object test_myimage2 has been imported

1
xCAT-test/autotest/testcase/xcat_inventory/templates/cluster_invdir/osimage/test_myimage/definition.json
View File

@ -18,4 +18,3 @@
},
"schema_version": "1.0"
}
#Version 2.14.1 (git commit ac941fd2501e8a581bfcc4c79b9301f6ec37ab93, built Mon May 21 06:15:46 EDT 2018)

1
xCAT-test/autotest/testcase/xcat_inventory/templates/cluster_invdir/osimage/test_myimage2/definition.json
View File

@ -18,4 +18,3 @@
},
"schema_version": "1.0"
}
#Version 2.14.1 (git commit ac941fd2501e8a581bfcc4c79b9301f6ec37ab93, built Mon May 21 06:15:46 EDT 2018)

1
xCAT-test/autotest/testcase/xcat_inventory/templates/environment/test.environments.osimage.update.json
View File

@ -50,4 +50,3 @@
},
"schema_version": "1.0"
}
#Version 2.14.4 (git commit 722709b61e63feb7f6d3ee787afa8113eefbe27e, built Wed Sep 26 06:17:57 EDT 2018)

1
xCAT-test/autotest/testcase/xcat_inventory/templates/osimage.json
View File

@ -37,4 +37,3 @@
},
"schema_version": "2.0"
}
#Version 2.14.5 (git commit e9d8db94e349c383a6686ecfd853536abe7a8c2b, built Wed Nov 21 06:17:14 EST 2018)

8
xCAT-test/autotest/testcase/xcat_inventory/templates/testcluster_backend/cluster.yaml
View File

@ -1,3 +1,11 @@
osdistro:
ubuntu17.10-ppc64el:
arch: ppc64el
basename: ubuntu
dirpaths: /install/ubuntu17.10/ppc64el
majorversion: '17'
minorversion: '10'
type: Linux
network:
prov:
basic_attr:

7
xCAT-test/autotest/testcase/xcatconfig/case0
View File

@ -94,7 +94,6 @@ cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
end
start:xcatconfig_c
description:To regenerate cretials
label:mn_only
@ -117,7 +116,11 @@ check:rc!=0
#step4:restore test environment
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
cmd:mv -f /etc/xcat/cabak /etc/xcat/ca ;mv -f /etc/xcat/certbak /etc/xcat/cert
cmd:rm -rf /etc/xcat/cabak /etc/xcat/certbak
check:rc==0
cmd:if lsdef service > /dev/null 2>&1; then updatenode service -P servicenode;makeconservercf;fi
check:rc==0
cmd:if lsdef service > /dev/null 2>&1; then rpower $$CN stat;fi
check:rc==0
end

24
xCAT-test/autotest/testcase/xcatd/case0
View File

@ -104,9 +104,11 @@ check:rc==0
cmd:service xcatd stop
check:rc==0
cmd:sleep 3
cmd:ps aux|tee /tmp/run_command_with_XCATBYPASS.log
cmd:awk '{print $11}' /tmp/run_command_with_XCATBYPASS.log|grep -E ^xcatd
check:rc!=0
cmd:rm -rf /tmp/run_command_with_XCATBYPASS.log
cmd:service xcatd status
check:output=~xcatd service|xcatd.service
check:output=~xcatd service is not running|inactive \(dead\)
cmd:tabdump site
check:rc!=0
cmd:XCATBYPASS=YES tabdump site
@ -160,4 +162,20 @@ cmd:chtab name=root policy.commands= policy.rule=allow
check:rc==0
end
start:reload_xcatd_with_XCATBYPASS
description:with XCATBYPASS=YES, there is no error when restart xcatd deamon. This case is add test case for issue 2727 : run xCAT in "XCATBYPASS" mode and simply reload xCAT to check if there is any errors.
label:mn_only,ci_test,xcatd
cmd:service xcatd status
check:rc==0
check:output=~xcatd service|xcatd.service
check:output=~xcatd service is running|active \(running\)
cmd:XCATBYPASS=YES lsxcatd -a
check:rc==0
check:output!=~Error|ERROR
cmd:XCATBYPASS=YES service xcatd status
check:rc==0
check:output!=~Error|ERROR
cmd:XCATBYPASS=YES service xcatd restart
check:rc==0
check:output!=~Error|ERROR
end

11
xCAT-test/autotest/testcase/xdcp/cases1
View File

@ -1,10 +1,12 @@
start:xdcp_nonroot_user
label:cn_os_ready,parallel_cmds
cmd:useradd -m xyzzy
cmd:lsdef -t site -z clustersite > /tmp/site.stanza
cmd:chdef -t site SNsyncfiledir=/tmp
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $servicenode "useradd -m xyzzy";useradd -m xyzzy;else useradd -m xyzzy;fi
check:rc==0
cmd:bash -c "( cd ~root && tar cf - .xcat .ssh ) | ( cd ~xyzzy && tar xf - )"
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $servicenode "bash -c \"( cd ~root && tar cf - .xcat .ssh ) | ( cd ~xyzzy && tar xf - )\"";bash -c "( cd ~root && tar cf - .xcat .ssh ) | ( cd ~xyzzy && tar xf - )";else bash -c "( cd ~root && tar cf - .xcat .ssh ) | ( cd ~xyzzy && tar xf - )";fi
check:rc==0
cmd:chown -R xyzzy ~xyzzy/.xcat ~xyzzy/.ssh
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $servicenode "chown -R xyzzy ~xyzzy/.xcat ~xyzzy/.ssh";chown -R xyzzy ~xyzzy/.xcat ~xyzzy/.ssh;else chown -R xyzzy ~xyzzy/.xcat ~xyzzy/.ssh;fi
check:rc==0
cmd:xdsh $$CN "useradd -m xyzzy"
check:rc==0
@ -18,6 +20,7 @@ cmd:xdsh $$CN "stat -c '%U' /tmp/sysctl.conf"
check:output=~xyzzy
cmd:xdsh $$CN "userdel xyzzy"
check:rc==0
cmd:userdel xyzzy
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $servicenode "userdel xyzzy";userdel xyzzy;else userdel xyzzy;fi
check:rc==0
cmd:if [ -e /tmp/site.standa ]; then cat /tmp/site.standa | mkdef -z -f; rm -rf /tmp/site.standa; fi
end

2
xCAT-test/autotest/testcase/xdsh/cases0
View File

@ -13,7 +13,7 @@ end
start:xdsh_regular_command
label:cn_os_ready,parallel_cmds
cmd:XCATBYPASS=1 xdsh $$CN "ps -ef"
cmd:xdsh $$CN "ps -ef"
check:rc==0
check:output=~$$CN:\s+UID\s+PID\s+PPID\s+C\s+STIME\s+TTY\s+TIME\s+CMD
end

4
xCAT-test/autotest/testcase/xdsh/cases1
View File

@ -3,10 +3,10 @@ description: Test the exit code when command xdsh failed
label:cn_os_ready,parallel_cmds
cmd:xdsh $$CN date
check:rc==0
cmd:mv /root/.ssh/id_rsa /root/.ssh/id_rsa.backup
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $$SN mv /root/.ssh/id_rsa /root/.ssh/id_rsa.backup;else mv /root/.ssh/id_rsa /root/.ssh/id_rsa.backup;fi
check:rc==0
cmd:xdsh $$CN date
check:rc!=0
cmd:mv /root/.ssh/id_rsa.backup /root/.ssh/id_rsa
cmd:servicenode=`lsdef $$CN |grep servicenode |awk -F= '{print $2}'`; if [ -n "$servicenode" ]; then xdsh $$SN mv /root/.ssh/id_rsa.backup /root/.ssh/id_rsa;else mv /root/.ssh/id_rsa.backup /root/.ssh/id_rsa;fi
check:rc==0
end

70
xCAT/postscripts/configeth
View File

@ -23,6 +23,15 @@ if [ -z "$UPDATENODE" ] || [ $UPDATENODE -ne 1 ] ; then
reboot_nic_bool=0
fi
fi
########################################################################
# networkmanager_active=0: use network.service
# networkmanager_active=1: use NetworkManager
########################################################################
networkmanager_active=0
checkservicestatus NetworkManager > /dev/null
if [ $? -eq 0 ]; then
networkmanager_active=1
fi
function configipv4(){
str_if_name=$1
str_v4ip=$2
@ -115,22 +124,29 @@ function configipv4(){
echo " vlan-raw-device ${parent_device}" >> $str_conf_file
fi
else
str_prefix=$(v4mask2prefix $str_v4mask)
# Write the info to the ifcfg file for redhat
con_name=""
str_conf_file=""
if [ $num_v4num -eq 0 ];then
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_if_name}"
echo "DEVICE=${str_if_name}" > $str_conf_file
else
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_if_name}:${num_v4num}"
echo "DEVICE=${str_if_name}:${num_v4num}" > $str_conf_file
if [ $num_v4num -ne 0 ]; then
str_if_name=${str_if_name}:${num_v4num}
fi
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_if_name}"
if [ $networkmanager_active -eq 1 ]; then
con_name=$(nmcli dev show ${str_if_name}|grep CONNECTION|awk -F: '{print $2}'|sed 's/^[ \t]*$//g')
if [ "$con_name" == "--" ] ; then
nmcli con add type ethernet con-name ${str_if_name} ifname ${str_if_name} ipv4.method manual ipv4.addresses ${str_v4ip}/${str_prefix}
else
nmcli con mod "${con_name}" ipv4.method manual ipv4.addresses ${str_v4ip}/${str_prefix}
fi
else
echo "DEVICE=${str_if_name}" > $str_conf_file
echo "BOOTPROTO=none" >> $str_conf_file
echo "NM_CONTROLLED=no" >> $str_conf_file
echo "IPADDR=${str_v4ip}" >> $str_conf_file
echo "NETMASK=${str_v4mask}" >> $str_conf_file
echo "ONBOOT=yes" >> $str_conf_file
fi
echo "BOOTPROTO=static" >> $str_conf_file
echo "NM_CONTROLLED=no" >> $str_conf_file
echo "IPADDR=${str_v4ip}" >> $str_conf_file
echo "NETMASK=${str_v4mask}" >> $str_conf_file
echo "ONBOOT=yes" >> $str_conf_file
if [ "$str_nic_mtu" != "$str_default_token" ]; then
echo "MTU=${str_nic_mtu}" >> $str_conf_file
fi
@ -519,7 +535,6 @@ elif [ "$1" = "-s" ];then
log_info "configeth on $NODE: config install nic, can not find information from dhcp lease file, return."
exit 1
fi
str_inst_net=$(v4calcnet $str_inst_ip $str_inst_mask)
num_index=1
while [ $num_index -le $NETWORKS_LINES ];do
@ -604,13 +619,25 @@ elif [ "$1" = "-s" ];then
hostname $NODE
echo $NODE > /etc/HOSTNAME
else
#write ifcfg-* file for redhat
con_name=""
str_inst_prefix=$(v4mask2prefix ${str_inst_mask})
str_conf_file="/etc/sysconfig/network-scripts/ifcfg-${str_inst_nic}"
echo "DEVICE=${str_inst_nic}" > $str_conf_file
echo "IPADDR=${str_inst_ip}" >> $str_conf_file
echo "NETMASK=${str_inst_mask}" >> $str_conf_file
echo "BOOTPROTO=static" >> $str_conf_file
echo "ONBOOT=yes" >> $str_conf_file
echo "HWADDR=${str_inst_mac}" >> $str_conf_file
if [ $networkmanager_active -eq 1 ]; then
con_name=$(nmcli dev show ${str_if_name}|grep CONNECTION|awk -F: '{print $2}'|sed 's/^[ \t]*$//g')
if [ "$con_name" == "--" ] ; then
nmcli con add type ethernet con-name ${str_inst_nic} ifname ${str_inst_nic} ipv4.method manual ipv4.addresses ${str_inst_ip}/${str_inst_prefix}
else
nmcli con mod "System ${str_inst_nic}" ipv4.method manual ipv4.addresses ${str_inst_ip}/${str_inst_prefix}
fi
else
echo "DEVICE=${str_inst_nic}" > $str_conf_file
echo "IPADDR=${str_inst_ip}" >> $str_conf_file
echo "NETMASK=${str_inst_mask}" >> $str_conf_file
echo "BOOTPROTO=none" >> $str_conf_file
echo "ONBOOT=yes" >> $str_conf_file
echo "HWADDR=${str_inst_mac}" >> $str_conf_file
fi
if [ -n "${str_inst_mtu}" ];then
echo "MTU=${str_inst_mtu}" >> $str_conf_file
fi
@ -647,7 +674,7 @@ elif [ "$1" = "-s" ];then
fi
fi
if [ "$UPDATENODE" = "1" ] || grep "REBOOT=TRUE" /opt/xcat/xcatinfo >/dev/null 2>&1; then
if [ "$UPDATENODE" = "1" ] || [ "$NODESETSTATE" = "netboot" ] || [ "$NODESETSTATE" = "statelite" ] || grep "REBOOT=TRUE" /opt/xcat/xcatinfo >/dev/null 2>&1; then
if [ "$str_os_type" = "debian" ];then
ifdown --force $str_inst_nic
else
@ -893,7 +920,6 @@ else
bool_modify_flag=0
str_nic_status='down'
str_his_file=${str_cfg_dir}xcat_history_important
str_history=`ip addr show dev $str_nic_name | grep inet | grep -iv dynamic | grep -iv link | grep $str_nic_name | awk '{print $2}'`
old_ifs=$IFS
IFS=$'\n'

40
xCAT/postscripts/enablesnmp
View File

@ -18,10 +18,7 @@ fi
#get snmp attribute
#NOTE: the length of SNMP Password has to be min=8
xCATSettingsSTART="xCAT settings START"
xCATSettingsEND="xCAT settings END"
xCATSettingsOID="xCAT customized"
xCATSettingsInfo="Entries between the START and END lines will be replaced each time by running enablesnmp"
xCATSettingsOID="xCAT setting"
snmpversion=$SNMPVERSION
snmpuser=$SNMPUSER
snmppwd=$SNMPPASSWD
@ -36,21 +33,8 @@ if [ $? -eq 0 ]; then
cp ${snmp_conf}.cumulus $snmp_conf
fi
grep "$xCATSettingsSTART" $snmp_conf 2>&1 1> /dev/null
if [ $? -eq 0 ]; then
#remove the previous snmp rule generated by xCAT
sed -i "/$xCATSettingsSTART/,/$xCATSettingsEND/ d" $snmp_conf
else
sed -i "/^\s*agentAddress/s/^/#/" $snmp_conf
sed -i '/agentAddress udp\:161\,udp6\:\[\:\:1\]\:161/s/^#//' $snmp_conf
sed -i "/view\s*systemonly\s*included\s*.1.3.6.1.2.1.17/s/^#//" $snmp_conf
sed -i "/pass_persist\s*.1.3.6.1.2.1.17\s*\/usr\/share\/snmp\/bridge_pp.py/s/^#//" $snmp_conf
fi
# Mark the start of xCAT section
echo "# $xCATSettingsSTART" >> $snmp_conf
echo "# $xCATSettingsInfo" >> $snmp_conf
# config snmpd to all the listening address
net add snmp-server listening-address all
if [[ "$snmpversion" =~ "3" ]]; then
#set up snmp version 3
@ -58,21 +42,17 @@ if [[ "$snmpversion" =~ "3" ]]; then
len=${#snmppwd}
if [ $len -lt 8 ]; then
echo "SNMP v3 specification requires password to have a minimum of 8 characters"
echo "# $xCATSettingsEND" >> $snmp_conf
exit -1
fi
snmpauth=`echo $snmpauth | tr '[a-z]' '[A-Z]'`
snmpauth=`echo $snmpauth | awk '{print tolower($0)}'`
if [ -n "$snmppriv" ]; then
snmppriv=`echo $snmppriv | tr '[a-z]' '[A-Z]'`
echo "createUser $snmpuser $snmpauth $snmppwd $snmppriv $snmppwd" >> $snmp_conf
echo "rwuser $snmpuser" >> $snmp_conf
snmppriv=`echo $snmppriv | awk '{print tolower($0)}'`
net add snmp-server username $snmpuser auth-$snmpauth $snmppwd encrypt-$snmppriv $snmppwd
else
echo "createUser $snmpuser $snmpauth $snmppwd" >> $snmp_conf
echo "rouser $snmpuser" >> $snmp_conf
net add snmp-server username $snmpuser auth-$snmpauth $snmppwd
fi
else
echo "Please define user/password/auth for SNMP v3 specification"
echo "# $xCATSettingsEND" >> $snmp_conf
exit -1
fi
elif [ -n "$snmppwd" ]; then
@ -81,10 +61,8 @@ elif [ -n "$snmpc" ]; then
community=$snmpc
fi
echo "rocommunity $community default" >> $snmp_conf
echo "rocommunity $community default -V systemonly" >> $snmp_conf
echo "# $xCATSettingsEND" >> $snmp_conf
net add snmp-server readonly-community $community access any
net commit
#create snmpd restart conf file
mkdir -p /etc/systemd/system/snmpd.service.d

42
xCAT/postscripts/xcatdsklspost
View File

@ -83,26 +83,6 @@ echolog()
}
update_VPD()
{
if [ -f /usr/sbin/vpdupdate ]; then
vpdupdate
#logger -t xCAT -p local4.info "xcatdsklspost: updating VPD database"
echolog "info" "updating VPD database"
fi
}
# Run updatevpd only when necessary
if [ -f /usr/sbin/lsvpd ]; then
/usr/sbin/lsvpd | grep -i -E 'cpu|processor' 2>&1 1>/dev/null
if [ "$?" = "1" ]; then
update_VPD
fi
fi
download_postscripts()
{
server=$1
@ -304,6 +284,28 @@ else
3|6) MODE=$1;;
esac
fi
update_VPD()
{
if [ -f /usr/sbin/vpdupdate ]; then
echolog "info" "updating VPD database"
vpdupdate
#logger -t xCAT -p local4.info "xcatdsklspost: updating VPD database"
else
echolog "warning" "/usr/sbin/vpdupdate is not available, please check and do VPD update later"
fi
}
if [ $NODE_DEPLOYMENT -eq 1 ] || [ "$MODE" = "4" ] || [ "$MODE" = "6" ]; then
# Run updatevpd only when necessary
if [ -f /usr/sbin/lsvpd ]; then
/usr/sbin/lsvpd | grep -i -E 'cpu|processor' 2>&1 1>/dev/null
if [ "$?" = "1" ]; then
update_VPD
fi
fi
fi
if [ $NODE_DEPLOYMENT -ne 1 ] && [ $MODE -ne 4 ] ; then
echolog "info" "=============updatenode starting===================="
fi