xCAT/xcat-core
2
0
Fork 0
mirror of https://github.com/xcat2/xcat-core.git synced 2025-05-22 19:52:03 +00:00
Code Issues Releases Wiki Activity

Remove trailing spaces in file docs/source/guides/admin-guides/manage_clusters/common/deployment/raid_cfg.rst

Browse Source
This commit is contained in:
GONG Jie 2017-12-31 23:59:59 +00:00
parent 9dd56edfe3
commit 2920620e54
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
docs/source/guides/admin-guides/manage_clusters/common/deployment/raid_cfg.rst
View File

@ -14,7 +14,7 @@ xCAT provides a partition script `raid1_rh.sh <https://raw.githubusercontent.com
In most scenarios, the sample partitioning script is sufficient to create a basic RAID1 across two disks and is provided as a sample to build upon.
1. Obtain the partition script: ::
1. Obtain the partition script: ::
mkdir -p /install/custom/partition/
wget https://raw.githubusercontent.com/xcat2/xcat-extensions/master/partition/raid1_rh.sh \
@ -22,13 +22,13 @@ In most scenarios, the sample partitioning script is sufficient to create a basi
2. Associate the partition script to the osimage: ::
chdef -t osimage -o rhels7.3-ppc64le-install-compute \
chdef -t osimage -o rhels7.3-ppc64le-install-compute \
partitionfile="s:/install/custom/partition/raid1_rh.sh"
3. Provision the node: ::
rinstall cn1 osimage=rhels7.3-ppc64le-install-compute
After the diskful nodes are up and running, you can check the RAID1 settings with the following process:
``mount`` command shows the ``/dev/mdx`` devices are mounted to various file systems, the ``/dev/mdx`` indicates that the RAID is being used on this node. ::
@ -37,7 +37,7 @@ After the diskful nodes are up and running, you can check the RAID1 settings wit
...
/dev/md1 on / type xfs (rw,relatime,attr2,inode64,noquota)
/dev/md0 on /boot type xfs (rw,relatime,attr2,inode64,noquota)
/dev/md2 on /var type xfs (rw,relatime,attr2,inode64,noquota)
/dev/md2 on /var type xfs (rw,relatime,attr2,inode64,noquota)
The file ``/proc/mdstat`` includes the RAID devices status on the system, here is an example of ``/proc/mdstat`` in the non-multipath environment: ::
@ -47,20 +47,20 @@ The file ``/proc/mdstat`` includes the RAID devices status on the system, here i
1047552 blocks super 1.2 [2/2] [UU]
resync=DELAYED
bitmap: 1/1 pages [64KB], 65536KB chunk
md3 : active raid1 sdk3[0] sdj3[1]
1047552 blocks super 1.2 [2/2] [UU]
resync=DELAYED
md0 : active raid1 sdk5[0] sdj5[1]
524224 blocks super 1.0 [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk
md1 : active raid1 sdk6[0] sdj6[1]
973998080 blocks super 1.2 [2/2] [UU]
[==>..................] resync = 12.8% (125356224/973998080) finish=138.1min speed=102389K/sec
bitmap: 1/1 pages [64KB], 65536KB chunk
unused devices: <none>
On the system with multipath configuration, the ``/proc/mdstat`` looks like: ::
@ -90,7 +90,7 @@ Deploy Diskful Nodes with RAID1 Setup on SLES
xCAT provides one sample autoyast template files with the RAID1 settings ``/opt/xcat/share/xcat/install/sles/service.raid1.sles11.tmpl``. You can customize the template file and put it under ``/install/custom/install/<platform>/`` if the default one does not match your requirements.
Here is the RAID1 partitioning section in service.raid1.sles11.tmpl: ::
Here is the RAID1 partitioning section in service.raid1.sles11.tmpl: ::
<partitioning config:type="list">
<drive>