2
0
mirror of https://github.com/xcat2/xNBA.git synced 2024-11-25 02:50:17 +00:00
xCAT Network Boot Agent
Go to file
Michael Brown 9f0b7f428a [ifmgmt] Do not sleep CPU while configuring network devices
iPXE currently calls cpu_nap() while performing DHCP, in order to
reduce CPU utilisation on virtual machines.  Under mild broadcast load
(~100 packets per second), this can cause received packets to be
dropped because the receive descriptor ring is overrun before the next
18Hz timer interrupt wakes up the CPU.  The result is that DHCP is
likely to intermittently fail on networks with appreciable amounts of
broadcast (or multicast) traffic.

This behaviour was introduced in the series of commits which
generalised the "dhcp" command to the "ifconf" command.  The earlier
code (which did not handle IPv6 configuration) had no call to
cpu_nap() and so did not suffer from this problem.

Fix by removing the call to cpu_nap() in ifpoller_progress().  This
has the undesirable side effect that CPU utilisation will remain at
100% while waiting for DHCP to complete (which can take several
seconds, if we have to wait around for potential ProxyDHCP offers to
arrive).

Reported-by: Alex Davies <adavies@jumptrading.com>
Reported-by: Christoffer Stokbæk <christoffers@easyspeedy.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-06-01 19:54:23 +01:00
contrib [errdb] Strip platform error code for non-platform-generated errors 2013-04-29 15:36:32 +01:00
src [ifmgmt] Do not sleep CPU while configuring network devices 2014-06-01 19:54:23 +01:00
COPYING Initial revision 2005-05-17 16:44:57 +00:00
COPYRIGHTS [build] Rename gPXE to iPXE 2010-04-19 23:43:39 +01:00
README [doc] Re-add README file 2010-05-28 00:03:47 +01:00

iPXE README File

Quick start guide:

   cd src
   make

For any more detailed instructions, see http://ipxe.org