Most xxx_init() functions are void functions with no failure cases.
Allow pci_vpd_init() to be used in the same way. (Subsequent calls to
pci_vpd_read() etc. will fail if pci_vpd_init() fails.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Since its implementation several years ago, no driver has used a
fragment list containing more than a single fragment. Simplify the
NVO core and the drivers that use it by removing the whole concept of
the fragment list, and using a simple (address,length) pair instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow functions other than realloc() to be used to reallocate DHCP
option block data, and specify the reallocation function at the time
of calling dhcpopt_init().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The max_len field is never used, and the len field is used only by
dhcp_tx(). Remove these two fields, and perform the necessary trivial
calculation in dhcp_tx() instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Driver for Intel 82576 based virtual functions, based on Intel source
code available at:
http://sourceforge.net/projects/e1000 (igbvf-1.0.7)
Based on initial port from Eric Keller <ekeller@princeton.edu>.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For IPoIB, we currently use the hardware address (i.e. the eight-byte
GUID) as the DHCP chaddr. This works, but some PXE servers (notably
Altiris RDP) refuse to respond if the chaddr field is anything other
than six bytes in length.
We already have the notion of an Ethernet-compatible link-layer
address, which is used in the iBFT (the design of which similarly
fails to account for non-Ethernet link layers). Use this as the first
preferred alternative to the actual link-layer address when
constructing the DHCP chaddr field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PXE debugging messages have remained pretty much unaltered since
Etherboot 5.4, and are now difficult to read in comparison to most of
the rest of iPXE.
Bring the pxe_udp debug messages up to normal iPXE standards.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Enhance the information collected by the function recorder to include
the call site and entry/exit counts. This allows fnrec.pl to produce
a call tree such as:
step (from core/getkey.c:46 = 0x17e90) {
ref_increment (from core/process.c:93 = 0x73ec) { }
net_step (from core/process.c:96 = 0x73f1) {
net_poll (from net/netdevice.c:741 = 0xbce6) {
netdev_poll (from net/netdevice.c:700 = 0xbc58) { }
netdev_rx_dequeue (from net/netdevice.c:709 = 0xbc65) { }
}
}
ref_decrement (from core/process.c:96 = 0x73f9) { }
}
Note that inlined functions are reported, confusingly, as extra calls
to the *containing* function. Minimise this confusion by adding the
attribute "no_instrument_function" to all functions declared as
inline. (Static functions that have been inlined autonomously by gcc
will still be problematic, but these are far fewer in number.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Earlier versions of the PXE specification do not have the SubVendor_ID
and SubDevice_ID fields, and some NBPs may not provide space for them.
Avoid overwriting the contents of these fields, just in case.
This is similar to the problem with the BufferLimit field in
PXENV_GET_CACHED_INFO.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Changes were made to files where the licence text within the files
themselves confirms that the files are GPL version 2 or later.
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Changes were made to files where the licence text within the files
themselves confirms that the files are GPL version 2.
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the real-mode address ffff:0010 to access the linear address
0x100000, and so test whether or not the A20 gate is enabled without
requiring a switch into flat real mode (or some other addressing
mode).
This speeds up CPU mode transitions, and also avoids breaking the NBP
from IBM's Tivoli Provisioning Manager for Operating System
Deployment. This NBP makes some calls to iPXE in VM86 mode rather
than true real mode and does not correctly emulate our transition into
flat real mode.
Interestingly, Tivoli's VMM *does* allow us to switch into protected
mode (though it patches our GDT so that we execute in ring 1 rather
than ring 0). However, paging is still disabled and we have a 4GB
segment limit. Being in ring 1 does not, therefore, restrict us in
any meaningful way; this has been verified by deliberately writing
garbage over Tivoli's own GDT (at address 0x02201010) during a
nominally VM86-mode PXE API call. It's unclear precisely what
protection this VMM is supposed to be offering.
Suggested-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some network cards automatically strip the VLAN header, providing the
VLAN tag via a side channel such as a completion queue entry. These
cards need to be able to report receive completions directly against
the relevant VLAN device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
VLAN device names have the form "netX.Y", e.g. "net0.5" for VLAN 5 on
net0. This use of "." conflicts with the use of "." as the
hierarchical separator in settings block names, with the result that
VLAN device settings cannot be accessed by name.
It would be trivial to treat the VLAN device settings as being a child
of the trunk device settings, but this would cause the VLAN device
settings to be applied to the trunk device: for example, setting
"net0.5/ip" would then apply the IP address to both net0.5 and net0.
Fix by changing the VLAN device name to use "-" instead of ".": the
VLAN device "net0.5" is now "net0-5".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Pass the settings block name as a parameter to register_settings(),
rather than defining it with settings_init() (and then possibly
changing it by directly manipulating settings->name).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The && and || operators should be left-associative, since that is how
they are treated in most other languages (including C and Unix
shell). For example, in the command:
dhcp net0 && goto dhcp_ok || echo No DHCP on net0
if the "dhcp net0" fails then the "echo" should be executed.
After an "exit" or a successful "goto", further commands on the same
line should never be executed. For example:
goto somewhere && echo This should never be printed
exit 0 && echo This should never be printed
exit 1 && echo This should never be printed
An "exit" should cause the current shell or script to terminate and
return the specified exit status to its caller. For example:
chain test.ipxe && echo Success || echo Failure
[in test.ipxe]
#!ipxe
exit 0
should echo "Success".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "shell" command allows a script to enter an interactive shell,
which is potentially useful for troubleshooting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some newer versions of gcc (observed with a patched gcc 4.5.1) seem to
treat our offsetof() implementation as not being a compile-time
constant. Fix by using __builtin_offsetof() when available. (As with
the original offsetof() macro, this code is copied from the Linux
kernel's stddef.h.)
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Almost all FIP packets contain at most one instance of each
descriptor. A VLAN notification may contain multiple VLAN
descriptors. The FCoE specification does not provide any guidance
regarding prioritisation of VLANs, so we may choose to arbitrarily
choose the first listed VLAN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
VLAN headers are allowed to contain a VLAN tag of zero, indicating
that the header specifies only a priority and that the packet does not
belong to any VLAN. The easiest way to handle this is to treat VLAN 0
as being a normal VLAN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The increase in length in Fibre Channel device names causes the
"selected FCF" message to wrap beyond 80 characters. Fix by using
abbreviations where possible.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Create the Fibre Channel port only when the FCoE port has selected a
Fibre Channel Forwarder to use. This avoids the confusion of having
an FC port created for the network device on which only VLAN discovery
is performed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
