add systemd support

xCAT-client/bin/pgsqlsetup

@@ -180,7 +180,8 @@ if ($::RUNCMD_RC != 0)
     exit(1);
 }
 # check if 9.X release not built by us is installed,  setup different
-if  (grep(/postgresql9/, @output)) {  # postgresql 9.x
+# SLES used default dir
+if  ( (grep(/postgresql9/, @output)) && ($::linuxos !~ /sles/) ){  # postgresql 9.x
  # figure out which 9.x release  and build path
  my @parseout= split(/\-/, $output[0]);
  my @ptflevel= split ("postgresql9",$parseout[0]);
@@ -986,7 +987,7 @@ sub setupxcatdb
       $cmd = "/var/lib/pgsql/bin/psql -d $::dbname -U postgres";
     } else {  # Linux
        $cmd = "$::pgcmddir/psql -d $::dbname -U postgres";
-       if ($debianflag){
+       if ( ($debianflag) || ($::linuxos =~ /sles/) ){
            $cmd = "su - postgres -c '$::pgcmddir/psql -d $::dbname -U postgres'";
        }
     }

xCAT-client/bin/rcons

@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 
 # Provide serial console access to nodes
 

xCAT-server/usr/lib/systemd/system/xcatd.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=xCAT Management Service
+After=network.target syslog.target sshd.service
+
+[Service]
+Type=forking
+EnvironmentFile=-/etc/sysconfig/xcat
+ExecStart=/opt/xcat/sbin/xcatd -p /var/run/xcatd.pid
+PIDFile=/var/run/xcatd.pid
+
+[Install]
+WantedBy=multi-user.target

xCAT-server/xCAT-server.spec

@@ -55,6 +55,16 @@ Requires: xCAT-client  >= %{epoch}:%(cat Version|cut -d. -f 1,2)
 
 Provides: xCAT-server = %{epoch}:%{version}
 
+%if 0%{!?initscripttype:1}
+# initscripttype not explicitly defined in some macro file or on commandline
+# use presence of systemd_post macro to determine the initscripttype
+%if %{?systemd_post:1}%{!?systemd_post:0}
+%global initscripttype systemd
+%else
+%global initscripttype sysv
+%endif
+%endif
+
 %description
 xCAT-server provides the core server and configuration management components of xCAT.  This package should be installed on your management server
 
@@ -128,8 +138,6 @@ chmod -h 755 $RPM_BUILD_ROOT/%{prefix}/sbin/*
 cp -h bin/* $RPM_BUILD_ROOT/%{prefix}/bin
 chmod -h 755 $RPM_BUILD_ROOT/%{prefix}/bin/*
 %endif
-#cp rc.d/* $RPM_BUILD_ROOT/%{prefix}/rc.d
-#chmod 755 $RPM_BUILD_ROOT/%{prefix}/rc.d/*
 
 cp share/xcat/ca/* $RPM_BUILD_ROOT/%{prefix}/share/xcat/ca
 chmod 644 $RPM_BUILD_ROOT/%{prefix}/share/xcat/ca/*
@@ -217,7 +225,6 @@ rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/aixinstall.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/slpdiscover.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/remoteimmsetup.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT/IMMUtils.pm
-#rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT/RShellAPI.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/bmcconfig.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/bpa.pm
 rm $RPM_BUILD_ROOT/%{prefix}/lib/perl/xCAT_plugin/esx.pm
@@ -313,9 +320,14 @@ cp lib/xcat/shfunctions $RPM_BUILD_ROOT/%{prefix}/lib
 chmod 644 $RPM_BUILD_ROOT/%{prefix}/lib/shfunctions
 %if %fsm
 %else
+%if %{initscripttype} == "systemd"
+mkdir -p $RPM_BUILD_ROOT/usr/lib/systemd/system
+cp usr/lib/systemd/system/xcatd.service $RPM_BUILD_ROOT/usr/lib/systemd/system
+%else
 mkdir -p $RPM_BUILD_ROOT/etc/init.d
 cp etc/init.d/xcatd $RPM_BUILD_ROOT/etc/init.d
 %endif
+%endif
 #TODO: the next has to me moved to postscript, to detect /etc/xcat vs /etc/opt/xcat
 mkdir -p $RPM_BUILD_ROOT/etc/xcat
 
@@ -369,7 +381,11 @@ rm -rf $RPM_BUILD_ROOT
 /etc/xcat
 %if %fsm
 %else
+%if %{initscripttype} == "systemd"
+/usr/lib/systemd/system/xcatd.service
+%else
 /etc/init.d/xcatd
+%endif
 #/etc/xcat/conf.orig/xcat-ws.conf.apache24
 #/etc/xcat/conf.orig/xcat-ws.conf.apache22
 /etc/apache2/conf.d/xcat-ws.conf
@@ -377,6 +393,9 @@ rm -rf $RPM_BUILD_ROOT
 %endif
 
 %changelog
+* Thu Jun 11 2015 - Arif Ali <aali@ocf.co.uk>
+- Add systemd support
+
 * Fri Nov 20 2007 - Jarrod Johnson <jbjohnso@us.ibm.com>
 - Changes for relocatible rpm.
 
@@ -410,6 +429,9 @@ if [ "$1" = "1" ]; then #Only if installing for the first time..
    /usr/lib/lsb/install_initd /etc/init.d/xcatd
  elif [ -x /sbin/chkconfig ]; then
    /sbin/chkconfig --add xcatd
+ elif [ -x /usr/bin/systemctl ]; then
+   /usr/bin/systemctl daemon-reload
+   /usr/bin/systemctl enable xcatd
  else
    echo "Unable to register init scripts on this system"
  fi
@@ -453,16 +475,27 @@ exit 0
 %preun
 %ifos linux
 if [ $1 == 0 ]; then  #This means only on -e
-	if [ -f "/proc/cmdline" ]; then   # prevent running it during install into chroot image
-  		/etc/init.d/xcatd stop
-  	fi
+  if [ -f "/proc/cmdline" ]; then   # prevent running it during install into chroot image
+    /etc/init.d/xcatd stop
+  fi
   if [ -x /usr/lib/lsb/remove_initd ]; then
-      /usr/lib/lsb/remove_initd /etc/init.d/xcatd
+    /usr/lib/lsb/remove_initd /etc/init.d/xcatd
   elif [ -x /sbin/chkconfig ]; then
     /sbin/chkconfig --del xcatd
+  elif [ -x /usr/bin/systemctl ]; then
+    /usr/bin/systemctl daemon-reload
+    /usr/bin/systemctl disable xcatd
   fi
   rm -f /usr/sbin/xcatd  #remove the symbolic
 
 fi
 %endif
 
+%postun
+%ifos linux
+if [ $1 == 0 ]; then  #This means only on -e
+  if [ -x /usr/bin/systemctl ]; then
+    /usr/bin/systemctl daemon-reload
+  fi
+fi
+

xCAT/postscripts/xcatinstallpost

@@ -20,7 +20,7 @@ until ip -4 --oneline addr show|grep -v 127.0.0.1 >/dev/null
 do
     sleep 2
     RETRY=$[ $RETRY + 1 ]
-    if [ $RETRY -eq 15  ];then
+    if [ $RETRY -eq 90  ];then
        logger -t xcat -p local4.err "Network not configured, please check..."
        echo `date` "xcatinstallpost: Network not configured, please check..." >> /var/log/xcat/xcat.log 
        exit 1