support for RAID1 on ppc64 RHEL6 service nodes: kickstart template file service.raid1.rhel6.ppc64.tmpl

git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@9679 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd

xCAT-server/share/xcat/install/rh/service.raid1.rhel6.ppc64.tmpl

@@ -0,0 +1,145 @@
+#egan@us.ibm.com
+#
+cmdline
+
+lang en_US
+network --bootproto dhcp
+
+#
+# Where's the source?
+# nfs --server hostname.of.server or IP --dir /path/to/RH/CD/image
+#
+#nfs --server #XCATVAR:INSTALL_NFS# --dir #XCATVAR:INSTALL_SRC_DIR#
+url --url http://#TABLE:noderes:$NODE:nfsserver#/install/#TABLE:nodetype:$NODE:os#/#TABLE:nodetype:$NODE:arch#
+
+#device ethernet e100
+keyboard "us"
+
+#
+# Clear the MBR
+#
+zerombr yes
+
+#
+# Wipe out the disk
+#
+clearpart --all --initlabel
+#clearpart --linux
+key --skip
+
+#
+# Customize to fit your needs
+#
+
+#No RAID
+#/boot really significant for this sort of setup nowadays?
+#part None --fstype "PPC PReP Boot" --size 8
+#part /boot --size 50 --fstype ext4
+
+#part swap --size 1024 
+#part / --size 1 --grow --fstype ext4
+
+#RAID 0 /scr for performance
+#part / --size 1024 --ondisk sda
+#part swap --size 512 --ondisk sda
+#part /var --size 1024 --ondisk sdb
+#part swap --size 512 --ondisk sdb
+#part raid.01 --size 1 --grow --ondisk sda
+#part raid.02 --size 1 --grow --ondisk sdb
+#raid /scr --level 0 --device md0 raid.01 raid.02
+
+#Full RAID 1 Sample
+part None --fstype "PPC PReP Boot" --size 8 --ondisk sda --asprimary
+part None --fstype "PPC PReP Boot" --size=8 --ondisk sdb --asprimary
+
+
+part raid.01 --size 200 --fstype ext4 --ondisk sda
+part raid.02 --size 200 --fstype ext4 --ondisk sdb
+raid /boot --level 1 --device md0 raid.01 raid.02
+
+part raid.11 --size 1024 --ondisk sda
+part raid.12 --size 1024 --ondisk sdb
+raid swap --level 1 --device md1 raid.11 raid.12
+
+part raid.21 --size 1 --fstype ext4 --grow --ondisk sda
+part raid.22 --size 1 --fstype ext4 --grow --ondisk sdb
+raid / --level 1 --device md2 raid.21 raid.22
+
+#
+# bootloader config
+# --append <args>
+# --useLilo
+# --md5pass <crypted MD5 password for GRUB>
+#
+bootloader
+
+#
+# install or upgrade
+#
+install
+
+#
+# text mode install (default is graphical)
+#
+text
+
+#
+# firewall
+#
+firewall --disabled
+
+#
+# Select a zone
+# Add the --utc switch if your hardware clock is set to GMT
+#
+#timezone US/Hawaii
+#timezone US/Pacific
+#timezone US/Mountain
+#timezone US/Central
+#timezone US/Eastern
+timezone --utc "#TABLE:site:key=timezone:value#"
+
+#
+# Don't do X
+#
+skipx
+
+
+#
+# To generate an encrypted root password use:
+#
+# perl -e 'print crypt("blah","Xa") . "\n";'p
+# openssl passwd -apr1 -salt xxxxxxxx password
+# 
+# where "blah" is your root password.
+#
+#rootpw --iscrypted XaLGAVe1C41x2
+#rootpw XaLGAVe1C41x2 --iscrypted
+rootpw --iscrypted #CRYPT:passwd:key=system,username=root:password#
+
+#
+# NIS setup: auth --enablenis --nisdomain sensenet 
+# --nisserver neptune --useshadow --enablemd5
+#
+# OR
+auth --useshadow --enablemd5
+
+#
+# SE Linux
+#
+selinux --disabled
+
+#
+# Reboot after installation
+#
+reboot
+
+#
+#end of section
+#
+%packages
+#INCLUDE_DEFAULT_PKGLIST#
+%pre
+#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/pre.rh#
+%post
+#INCLUDE:#ENV:XCATROOT#/share/xcat/install/scripts/post.rh#

xCAT/postscripts/setbootfromdisk

@@ -24,6 +24,16 @@ if [[ $OS = "Linux" ]]; then
             fi
 
             BOOTDEVICE=`echo $BOOTENTRY | awk '{print $1}'`
+
+            #software raid, assume sda and sdb
+            if echo $BOOTDEVICE | grep "md"
+            then
+                logger -t xcat setbootfromdisk: Setting sda sdb to be the default bootup device
+                echo "setbootfromdisk: setting up sda sdb to be the default bootup device"
+                bootlist -m normal sda sdb
+                exit 0
+            fi
+
             if [[ -z $BOOTDEVICE ]]; then
                 logger -t xcat setbootfromdisk: cannot find the booting device
             else