arif/xcat-core
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

remove mediawiki path from the man pages

Browse Source
This commit is contained in:
lissav 2014-07-29 12:10:17 -04:00
parent 213d17ca74
commit c20b20c4bb
9 changed files with 21 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
xCAT-client/pods/man1/configfpc.1.pod
View File

@ -24,8 +24,8 @@ The B<configfpc> command discovers the FPCs and collects the MAC address. The MA
This process is repeated until no more FPCs are discovered.
For more information on xCAT support of NeXtScale and configfpc see:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_NeXtScale_Clusters
For more information on xCAT support of NeXtScale and configfpc see the following doc:
XCAT_NeXtScale_Clusters
=head1 OPTIONS

2
xCAT-client/pods/man1/db2sqlsetup.1.pod
View File

@ -24,7 +24,7 @@ The xcatd daemon will be stopped during migration on the MN. No xCAT commands s
The db2sqlsetup script must be run on each Service Node, after the DB2 Client code has been installed, to setup the DB2 Client (-C). There are two postscripts that are provided ( db2install and odbcsetup) that will automatically setup you Service Node as a DB2 client.
For full information on the setup of DB2, see http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_DB2_as_the_xCAT_DB.
For full information on the setup of DB2, see the following doc: Setting_Up_DB2_as_the_xCAT_DB.
When running of db2sqlsetup on the MN:
One password must be supplied for the setup, a password for the xcatdb unix id which will be used as the DB2 instance id and database name. The password will be prompted for interactively or can be input with the XCATDB2PW environment variable.

2
xCAT-client/pods/man1/geninitrd.1.pod
View File

@ -38,7 +38,7 @@ B<osupdatename> - comma separated 'osdistroupdate' object. Each 'osdistroupdate'
Linux distro update. When run geninitrd, 'kernel-*.rpm' will be searched from osdistroupdate.dirpath
to get all the rpm packages and then search the drivers from the rpm packages.
Refer to the doc: https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Using_Linux_Driver_Update_Disk
Refer to the doc: Using_Linux_Driver_Update_Disk
=back

4
xCAT-client/pods/man1/lsvm.1.pod
View File

@ -41,8 +41,8 @@ The Memory Interleaving Mode has 3 valid options:
1 - interleaved
2 - non-interleaved
More information about this part, refer to the section Using the *vm commands to define partitions in xCAT DFM in the link below.
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_Power_775_Hardware_Management
More information about this part, refer to the section Using the *vm commands to define partitions in xCAT DFM in the following doc:
XCAT_Power_775_Hardware_Management
=head2 For KVM and Vmware

6
xCAT-client/pods/man1/mysqlsetup.1.pod
View File

@ -20,7 +20,7 @@ B<mysqlsetup> {B<-L>|B<--LL>} [-V|--verbose]
=head1 DESCRIPTION
B<mysqlsetup> - Sets up the MySQL or MariaDB database (linux only for MariaDB) for xCAT to use. The mysqlsetup script is run on the Management Node as root after the MySQL code or MariaDB code has been installed. Before running the init option, the MySQL server should be stopped, if it is running. The xCAT daemon, xcatd, must be running, do not stop it. No xCAT commands should be run during the init process, because we will be migrating the xCAT database to MySQL or MariaDB and restarting the xcatd daemon as well as the MySQL daemon. For full information on all the steps that will be done, read the "Configure MySQL and Migrate xCAT Data to MySQL" sections in
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_MySQL_as_the_xCAT_DB
Setting_Up_MySQL_as_the_xCAT_DB
Two passwords must be supplied for the setup, a password for the xcatadmin id and a password for the root id in the MySQL database. These will be prompted for interactively, unless the environment variables XCATMYSQLADMIN_PW and XCATMYSQLROOT_PW are set to the passwords for the xcatadmin id and root id in the database,resp.
Note below we refer to MySQL but it works the same for MariaDB.
@ -57,13 +57,13 @@ This option runs during update, it will take all the host from the input file (p
This option sets up the ODBC /etc/../odbcinst.ini, /etc/../odbc.ini and the .odbc.ini file in roots home directory will be created and initialized to run off the xcatdb MySQL database.
See "Add ODBC Support" in
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_MySQL_as_the_xCAT_DB
Setting_Up_MySQL_as_the_xCAT_DB
=item B<-L|--LL>
Additional database configuration specifically for the LoadLeveler product.
See "Add ODBC Support" in
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_MySQL_as_the_xCAT_DB
Setting_Up_MySQL_as_the_xCAT_DB
=back

2
xCAT-client/pods/man1/pgsqlsetup.1.pod
View File

@ -40,7 +40,7 @@ The init option is used to setup an installed PostgreSQL database so that xCAT c
On AIX, it additionally setup the xcatadm unix id and the postgres id and group. For AIX, you should be using the PostgreSQL rpms available from the xCAT website. For Linux, you should use the PostgreSQL rpms shipped with the OS. You can chose the -o option, to run after the init.
To add additional nodes to access the PostgreSQL server, setup on the Management Node, edit the pg_hba.conf file.
For more documentation see:https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Setting_Up_PostgreSQL_as_the_xCAT_DB
For more documentation see the following documentation: Setting_Up_PostgreSQL_as_the_xCAT_DB
=item B<-N|--nostart>

10
xCAT-client/pods/man1/rflash.1.pod
View File

@ -60,8 +60,8 @@ If it outputs B<"Timeout waiting for prompt"> during the upgrade, please set the
In currently Direct FSP/BPA Management, our B<rflash> doesn't support B<concurrent> value of B<--activate> flag, and supports B<disruptive> and B<deferred>. The B<disruptive> option will cause any affected systems that are powered on to be powered down before installing and activating the update. So we require that the systems should be powered off before do the firmware update.
The B<deferred> option will load the new firmware into the T (temp) side, but will not activate it like the disruptive firmware. The customer will continue to run the Frames and CECs working with the P (perm) side and can wait for a maintenance window where they can activate and boot the Frame/CECs with new firmware levels. Refer to the link to get more details:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_Power_775_Hardware_Management#Perform_Deferred_Firmware_upgrades_for_frame.2FCEC_on_Power_775
The B<deferred> option will load the new firmware into the T (temp) side, but will not activate it like the disruptive firmware. The customer will continue to run the Frames and CECs working with the P (perm) side and can wait for a maintenance window where they can activate and boot the Frame/CECs with new firmware levels. Refer to the following documentation to get more details:
XCAT_Power_775_Hardware_Management#Perform_Deferred_Firmware_upgrades_for_frame.2FCEC_on_Power_775
In Direct FSP/BPA Management, there is -d <data_directory> option. The default value is /tmp. When do firmware update, rflash will put some related data from rpm packages in <data_directory> directory, so the execution of rflash will require available disk space in <data_directory> for the command to properly execute:
@ -71,12 +71,12 @@ For one GFW rpm package and one power code rpm package , if the GFW rpm package
For Power 775, the rflash command takes effect on the primary and secondary FSPs or BPAs almost in parallel.
For more details about the Firmware Update using Direct FSP/BPA Management, refer to:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_Power_775_Hardware_Management#Updating_the_BPA_and_FSP_firmware_using_xCAT_DFM
XCAT_Power_775_Hardware_Management
=head2 NeXtScale FPC specific:
The command will update firmware for NeXtScale FPC when given an FPC node and the http information needed to access the firmware. The http imformation required includes both the MN IP address as well as the directory containing the firmware. It is recommended that the firmware be downloaded and placed in the /install directory structure as the xCAT MN /install directory is configured with the correct permissions for http. Refer to the link to get more details:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_NeXtScale_Clusters#Update_the_FPC_firmware_.28optional.29
The command will update firmware for NeXtScale FPC when given an FPC node and the http information needed to access the firmware. The http imformation required includes both the MN IP address as well as the directory containing the firmware. It is recommended that the firmware be downloaded and placed in the /install directory structure as the xCAT MN /install directory is configured with the correct permissions for http. Refer to the doc to get more details:
XCAT_NeXtScale_Clusters
=head1 B<Options>

10
xCAT-client/pods/man1/updatenode.1.pod
View File

@ -89,7 +89,7 @@ Files may be distributed and synchronized for both diskless and
diskfull nodes. Syncing files to NFS-based statelite nodes is not supported.
More information on using the synchronization file function is in
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Using_Updatenode.
the following doc: Using_Updatenode.
=head3 Create the synclist file
@ -100,7 +100,7 @@ and the destination location for the files on the target node.
For more information on creating your synclist files and where to put them, read:
http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Sync-ing_Config_Files_to_Nodes
Sync-ing_Config_Files_to_Nodes
=head3 Run updatenode to synchronize the files
@ -111,7 +111,7 @@ http://sourceforge.net/apps/mediawiki/xcat/index.php?title=Sync-ing_Config_Files
=head2 To install or update software
updatenode can be use to install or update software on the nodes. See the following documentation for setting up otherpkgs:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Install_Additional_Packages
Install_Additional_Packages
To install/update the packages, run:
@ -136,9 +136,9 @@ B<For AIX systems:>
Note: The updatenode command is used to update AIX diskfull nodes only. For updating diskless AIX nodes refer to the xCAT for AIX update documentation and use the xCAT mknimimage command.
For information on updating software on AIX cluster:
For diskful installs, read:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_AIX_RTE_Diskfull_Nodes
XCAT_AIX_RTE_Diskfull_Nodes
For diskless installs, read:
https://sourceforge.net/apps/mediawiki/xcat/index.php?title=XCAT_AIX_Diskless_Nodes
XCAT_AIX_Diskless_Nodes
=head2 To run postscripts

2
xCAT-client/pods/man1/xdcp.1.pod
View File

@ -205,7 +205,7 @@ For example, your rsynclist file may look like this:
Note: no order can be assumed by the order that the EXECUTE,EXECUTEALWAYS and APPEND clause fall in the synclist file.
For more information on syncing files to node, read https://sourceforge.net/apps/mediawiki/xcat/index.php?title=Sync-ing_Config_Files_to_Nodes
For more information on syncing files to node, read Sync-ing_Config_Files_to_Nodes
On Linux rsync always uses ssh remoteshell. On AIX, ssh or rsh is used depending on the site.useSSHonAIX attribute.