346 lines
		
	
	
		
			8.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			346 lines
		
	
	
		
			8.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Freescale QUICC Engine USB Host Controller Driver
 | 
						|
 *
 | 
						|
 * Copyright (c) Freescale Semicondutor, Inc. 2006.
 | 
						|
 *               Shlomi Gridish <gridish@freescale.com>
 | 
						|
 *               Jerry Huang <Chang-Ming.Huang@freescale.com>
 | 
						|
 * Copyright (c) Logic Product Development, Inc. 2007
 | 
						|
 *               Peter Barada <peterb@logicpd.com>
 | 
						|
 * Copyright (c) MontaVista Software, Inc. 2008.
 | 
						|
 *               Anton Vorontsov <avorontsov@ru.mvista.com>
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute  it and/or modify it
 | 
						|
 * under  the terms of  the GNU General  Public License as published by the
 | 
						|
 * Free Software Foundation;  either version 2 of the  License, or (at your
 | 
						|
 * option) any later version.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/types.h>
 | 
						|
#include <linux/spinlock.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/errno.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/usb.h>
 | 
						|
#include <linux/gpio.h>
 | 
						|
#include <asm/qe.h>
 | 
						|
#include "../core/hcd.h"
 | 
						|
#include "fhci.h"
 | 
						|
 | 
						|
/* virtual root hub specific descriptor */
 | 
						|
static u8 root_hub_des[] = {
 | 
						|
	0x09, /* blength */
 | 
						|
	0x29, /* bDescriptorType;hub-descriptor */
 | 
						|
	0x01, /* bNbrPorts */
 | 
						|
	0x00, /* wHubCharacteristics */
 | 
						|
	0x00,
 | 
						|
	0x01, /* bPwrOn2pwrGood;2ms */
 | 
						|
	0x00, /* bHubContrCurrent;0mA */
 | 
						|
	0x00, /* DeviceRemoveable */
 | 
						|
	0xff, /* PortPwrCtrlMask */
 | 
						|
};
 | 
						|
 | 
						|
static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
 | 
						|
{
 | 
						|
	int gpio = fhci->gpios[gpio_nr];
 | 
						|
	bool alow = fhci->alow_gpios[gpio_nr];
 | 
						|
 | 
						|
	if (!gpio_is_valid(gpio))
 | 
						|
		return;
 | 
						|
 | 
						|
	gpio_set_value(gpio, on ^ alow);
 | 
						|
	mdelay(5);
 | 
						|
}
 | 
						|
 | 
						|
void fhci_config_transceiver(struct fhci_hcd *fhci,
 | 
						|
			     enum fhci_port_status status)
 | 
						|
{
 | 
						|
	fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
 | 
						|
 | 
						|
	switch (status) {
 | 
						|
	case FHCI_PORT_POWER_OFF:
 | 
						|
		fhci_gpio_set_value(fhci, GPIO_POWER, false);
 | 
						|
		break;
 | 
						|
	case FHCI_PORT_DISABLED:
 | 
						|
	case FHCI_PORT_WAITING:
 | 
						|
		fhci_gpio_set_value(fhci, GPIO_POWER, true);
 | 
						|
		break;
 | 
						|
	case FHCI_PORT_LOW:
 | 
						|
		fhci_gpio_set_value(fhci, GPIO_SPEED, false);
 | 
						|
		break;
 | 
						|
	case FHCI_PORT_FULL:
 | 
						|
		fhci_gpio_set_value(fhci, GPIO_SPEED, true);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		WARN_ON(1);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
 | 
						|
}
 | 
						|
 | 
						|
/* disable the USB port by clearing the EN bit in the USBMOD register */
 | 
						|
void fhci_port_disable(struct fhci_hcd *fhci)
 | 
						|
{
 | 
						|
	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
 | 
						|
	enum fhci_port_status port_status;
 | 
						|
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	fhci_stop_sof_timer(fhci);
 | 
						|
 | 
						|
	fhci_flush_all_transmissions(usb);
 | 
						|
 | 
						|
	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
 | 
						|
	port_status = usb->port_status;
 | 
						|
	usb->port_status = FHCI_PORT_DISABLED;
 | 
						|
 | 
						|
	/* Enable IDLE since we want to know if something comes along */
 | 
						|
	usb->saved_msk |= USB_E_IDLE_MASK;
 | 
						|
	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
 | 
						|
 | 
						|
	/* check if during the disconnection process attached new device */
 | 
						|
	if (port_status == FHCI_PORT_WAITING)
 | 
						|
		fhci_device_connected_interrupt(fhci);
 | 
						|
	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
 | 
						|
	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
 | 
						|
	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
}
 | 
						|
 | 
						|
/* enable the USB port by setting the EN bit in the USBMOD register */
 | 
						|
void fhci_port_enable(void *lld)
 | 
						|
{
 | 
						|
	struct fhci_usb *usb = (struct fhci_usb *)lld;
 | 
						|
	struct fhci_hcd *fhci = usb->fhci;
 | 
						|
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	fhci_config_transceiver(fhci, usb->port_status);
 | 
						|
 | 
						|
	if ((usb->port_status != FHCI_PORT_FULL) &&
 | 
						|
			(usb->port_status != FHCI_PORT_LOW))
 | 
						|
		fhci_start_sof_timer(fhci);
 | 
						|
 | 
						|
	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
 | 
						|
	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
}
 | 
						|
 | 
						|
void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
 | 
						|
{
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
 | 
						|
	gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
 | 
						|
	gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
 | 
						|
 | 
						|
	mdelay(5);
 | 
						|
 | 
						|
	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
 | 
						|
	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
 | 
						|
	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
}
 | 
						|
 | 
						|
/* generate the RESET condition on the bus */
 | 
						|
void fhci_port_reset(void *lld)
 | 
						|
{
 | 
						|
	struct fhci_usb *usb = (struct fhci_usb *)lld;
 | 
						|
	struct fhci_hcd *fhci = usb->fhci;
 | 
						|
	u8 mode;
 | 
						|
	u16 mask;
 | 
						|
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	fhci_stop_sof_timer(fhci);
 | 
						|
	/* disable the USB controller */
 | 
						|
	mode = in_8(&fhci->regs->usb_mod);
 | 
						|
	out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
 | 
						|
 | 
						|
	/* disable idle interrupts */
 | 
						|
	mask = in_be16(&fhci->regs->usb_mask);
 | 
						|
	out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
 | 
						|
 | 
						|
	fhci_io_port_generate_reset(fhci);
 | 
						|
 | 
						|
	/* enable interrupt on this endpoint */
 | 
						|
	out_be16(&fhci->regs->usb_mask, mask);
 | 
						|
 | 
						|
	/* enable the USB controller */
 | 
						|
	mode = in_8(&fhci->regs->usb_mod);
 | 
						|
	out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
 | 
						|
	fhci_start_sof_timer(fhci);
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
}
 | 
						|
 | 
						|
int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 | 
						|
{
 | 
						|
	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
 | 
						|
	int ret = 0;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	spin_lock_irqsave(&fhci->lock, flags);
 | 
						|
 | 
						|
	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
 | 
						|
			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
 | 
						|
			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
 | 
						|
		*buf = 1 << 1;
 | 
						|
		ret = 1;
 | 
						|
		fhci_dbg(fhci, "-- %s\n", __func__);
 | 
						|
	}
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&fhci->lock, flags);
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 | 
						|
			    u16 wIndex, char *buf, u16 wLength)
 | 
						|
{
 | 
						|
	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
 | 
						|
	int retval = 0;
 | 
						|
	int len = 0;
 | 
						|
	struct usb_hub_status *hub_status;
 | 
						|
	struct usb_port_status *port_status;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&fhci->lock, flags);
 | 
						|
 | 
						|
	fhci_dbg(fhci, "-> %s\n", __func__);
 | 
						|
 | 
						|
	switch (typeReq) {
 | 
						|
	case ClearHubFeature:
 | 
						|
		switch (wValue) {
 | 
						|
		case C_HUB_LOCAL_POWER:
 | 
						|
		case C_HUB_OVER_CURRENT:
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			goto error;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case ClearPortFeature:
 | 
						|
		fhci->vroot_hub->feature &= (1 << wValue);
 | 
						|
 | 
						|
		switch (wValue) {
 | 
						|
		case USB_PORT_FEAT_ENABLE:
 | 
						|
			fhci->vroot_hub->port.wPortStatus &=
 | 
						|
			    ~USB_PORT_STAT_ENABLE;
 | 
						|
			fhci_port_disable(fhci);
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_C_ENABLE:
 | 
						|
			fhci->vroot_hub->port.wPortChange &=
 | 
						|
			    ~USB_PORT_STAT_C_ENABLE;
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_SUSPEND:
 | 
						|
			fhci->vroot_hub->port.wPortStatus &=
 | 
						|
			    ~USB_PORT_STAT_SUSPEND;
 | 
						|
			fhci_stop_sof_timer(fhci);
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_C_SUSPEND:
 | 
						|
			fhci->vroot_hub->port.wPortChange &=
 | 
						|
			    ~USB_PORT_STAT_C_SUSPEND;
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_POWER:
 | 
						|
			fhci->vroot_hub->port.wPortStatus &=
 | 
						|
			    ~USB_PORT_STAT_POWER;
 | 
						|
			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_C_CONNECTION:
 | 
						|
			fhci->vroot_hub->port.wPortChange &=
 | 
						|
			    ~USB_PORT_STAT_C_CONNECTION;
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_C_OVER_CURRENT:
 | 
						|
			fhci->vroot_hub->port.wPortChange &=
 | 
						|
			    ~USB_PORT_STAT_C_OVERCURRENT;
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_C_RESET:
 | 
						|
			fhci->vroot_hub->port.wPortChange &=
 | 
						|
			    ~USB_PORT_STAT_C_RESET;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			goto error;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case GetHubDescriptor:
 | 
						|
		memcpy(buf, root_hub_des, sizeof(root_hub_des));
 | 
						|
		buf[3] = 0x11; /* per-port power, no ovrcrnt */
 | 
						|
		len = (buf[0] < wLength) ? buf[0] : wLength;
 | 
						|
		break;
 | 
						|
	case GetHubStatus:
 | 
						|
		hub_status = (struct usb_hub_status *)buf;
 | 
						|
		hub_status->wHubStatus =
 | 
						|
		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
 | 
						|
		hub_status->wHubChange =
 | 
						|
		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
 | 
						|
		len = 4;
 | 
						|
		break;
 | 
						|
	case GetPortStatus:
 | 
						|
		port_status = (struct usb_port_status *)buf;
 | 
						|
		port_status->wPortStatus =
 | 
						|
		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
 | 
						|
		port_status->wPortChange =
 | 
						|
		    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
 | 
						|
		len = 4;
 | 
						|
		break;
 | 
						|
	case SetHubFeature:
 | 
						|
		switch (wValue) {
 | 
						|
		case C_HUB_OVER_CURRENT:
 | 
						|
		case C_HUB_LOCAL_POWER:
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			goto error;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case SetPortFeature:
 | 
						|
		fhci->vroot_hub->feature |= (1 << wValue);
 | 
						|
 | 
						|
		switch (wValue) {
 | 
						|
		case USB_PORT_FEAT_ENABLE:
 | 
						|
			fhci->vroot_hub->port.wPortStatus |=
 | 
						|
			    USB_PORT_STAT_ENABLE;
 | 
						|
			fhci_port_enable(fhci->usb_lld);
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_SUSPEND:
 | 
						|
			fhci->vroot_hub->port.wPortStatus |=
 | 
						|
			    USB_PORT_STAT_SUSPEND;
 | 
						|
			fhci_stop_sof_timer(fhci);
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_RESET:
 | 
						|
			fhci->vroot_hub->port.wPortStatus |=
 | 
						|
			    USB_PORT_STAT_RESET;
 | 
						|
			fhci_port_reset(fhci->usb_lld);
 | 
						|
			fhci->vroot_hub->port.wPortStatus |=
 | 
						|
			    USB_PORT_STAT_ENABLE;
 | 
						|
			fhci->vroot_hub->port.wPortStatus &=
 | 
						|
			    ~USB_PORT_STAT_RESET;
 | 
						|
			break;
 | 
						|
		case USB_PORT_FEAT_POWER:
 | 
						|
			fhci->vroot_hub->port.wPortStatus |=
 | 
						|
			    USB_PORT_STAT_POWER;
 | 
						|
			fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			goto error;
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
error:
 | 
						|
		retval = -EPIPE;
 | 
						|
	}
 | 
						|
 | 
						|
	fhci_dbg(fhci, "<- %s\n", __func__);
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&fhci->lock, flags);
 | 
						|
 | 
						|
	return retval;
 | 
						|
}
 |