2604 lines
		
	
	
		
			72 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2604 lines
		
	
	
		
			72 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Management Module Support for MPT (Message Passing Technology) based
 | |
|  * controllers
 | |
|  *
 | |
|  * This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
 | |
|  * Copyright (C) 2007-2009  LSI Corporation
 | |
|  *  (mailto:DL-MPTFusionLinux@lsi.com)
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License
 | |
|  * as published by the Free Software Foundation; either version 2
 | |
|  * of the License, or (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * NO WARRANTY
 | |
|  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
 | |
|  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
 | |
|  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
 | |
|  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
 | |
|  * solely responsible for determining the appropriateness of using and
 | |
|  * distributing the Program and assumes all risks associated with its
 | |
|  * exercise of rights under this Agreement, including but not limited to
 | |
|  * the risks and costs of program errors, damage to or loss of data,
 | |
|  * programs or equipment, and unavailability or interruption of operations.
 | |
| 
 | |
|  * DISCLAIMER OF LIABILITY
 | |
|  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
 | |
|  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 | |
|  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
 | |
|  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 | |
|  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 | |
|  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
 | |
|  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
 | |
| 
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 | |
|  * USA.
 | |
|  */
 | |
| 
 | |
| #include <linux/version.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/smp_lock.h>
 | |
| #include <linux/compat.h>
 | |
| #include <linux/poll.h>
 | |
| 
 | |
| #include <linux/io.h>
 | |
| #include <linux/uaccess.h>
 | |
| 
 | |
| #include "mpt2sas_base.h"
 | |
| #include "mpt2sas_ctl.h"
 | |
| 
 | |
| static struct fasync_struct *async_queue;
 | |
| static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
 | |
| 
 | |
| static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
 | |
|     u8 *issue_reset);
 | |
| 
 | |
| /**
 | |
|  * enum block_state - blocking state
 | |
|  * @NON_BLOCKING: non blocking
 | |
|  * @BLOCKING: blocking
 | |
|  *
 | |
|  * These states are for ioctls that need to wait for a response
 | |
|  * from firmware, so they probably require sleep.
 | |
|  */
 | |
| enum block_state {
 | |
| 	NON_BLOCKING,
 | |
| 	BLOCKING,
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 | |
| /**
 | |
|  * _ctl_display_some_debug - debug routine
 | |
|  * @ioc: per adapter object
 | |
|  * @smid: system request message index
 | |
|  * @calling_function_name: string pass from calling function
 | |
|  * @mpi_reply: reply message frame
 | |
|  * Context: none.
 | |
|  *
 | |
|  * Function for displaying debug info helpfull when debugging issues
 | |
|  * in this module.
 | |
|  */
 | |
| static void
 | |
| _ctl_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
 | |
|     char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
 | |
| {
 | |
| 	Mpi2ConfigRequest_t *mpi_request;
 | |
| 	char *desc = NULL;
 | |
| 
 | |
| 	if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
 | |
| 		return;
 | |
| 
 | |
| 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 | |
| 	switch (mpi_request->Function) {
 | |
| 	case MPI2_FUNCTION_SCSI_IO_REQUEST:
 | |
| 	{
 | |
| 		Mpi2SCSIIORequest_t *scsi_request =
 | |
| 		    (Mpi2SCSIIORequest_t *)mpi_request;
 | |
| 
 | |
| 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 | |
| 		    "scsi_io, cmd(0x%02x), cdb_len(%d)",
 | |
| 		    scsi_request->CDB.CDB32[0],
 | |
| 		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
 | |
| 		desc = ioc->tmp_string;
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_SCSI_TASK_MGMT:
 | |
| 		desc = "task_mgmt";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_IOC_INIT:
 | |
| 		desc = "ioc_init";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_IOC_FACTS:
 | |
| 		desc = "ioc_facts";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_CONFIG:
 | |
| 	{
 | |
| 		Mpi2ConfigRequest_t *config_request =
 | |
| 		    (Mpi2ConfigRequest_t *)mpi_request;
 | |
| 
 | |
| 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 | |
| 		    "config, type(0x%02x), ext_type(0x%02x), number(%d)",
 | |
| 		    (config_request->Header.PageType &
 | |
| 		     MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
 | |
| 		    config_request->Header.PageNumber);
 | |
| 		desc = ioc->tmp_string;
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_PORT_FACTS:
 | |
| 		desc = "port_facts";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_PORT_ENABLE:
 | |
| 		desc = "port_enable";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_EVENT_NOTIFICATION:
 | |
| 		desc = "event_notification";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_FW_DOWNLOAD:
 | |
| 		desc = "fw_download";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_FW_UPLOAD:
 | |
| 		desc = "fw_upload";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_RAID_ACTION:
 | |
| 		desc = "raid_action";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
 | |
| 	{
 | |
| 		Mpi2SCSIIORequest_t *scsi_request =
 | |
| 		    (Mpi2SCSIIORequest_t *)mpi_request;
 | |
| 
 | |
| 		snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 | |
| 		    "raid_pass, cmd(0x%02x), cdb_len(%d)",
 | |
| 		    scsi_request->CDB.CDB32[0],
 | |
| 		    le16_to_cpu(scsi_request->IoFlags) & 0xF);
 | |
| 		desc = ioc->tmp_string;
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 | |
| 		desc = "sas_iounit_cntl";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_SATA_PASSTHROUGH:
 | |
| 		desc = "sata_pass";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_DIAG_BUFFER_POST:
 | |
| 		desc = "diag_buffer_post";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_DIAG_RELEASE:
 | |
| 		desc = "diag_release";
 | |
| 		break;
 | |
| 	case MPI2_FUNCTION_SMP_PASSTHROUGH:
 | |
| 		desc = "smp_passthrough";
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (!desc)
 | |
| 		return;
 | |
| 
 | |
| 	printk(MPT2SAS_DEBUG_FMT "%s: %s, smid(%d)\n",
 | |
| 	    ioc->name, calling_function_name, desc, smid);
 | |
| 
 | |
| 	if (!mpi_reply)
 | |
| 		return;
 | |
| 
 | |
| 	if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
 | |
| 		printk(MPT2SAS_DEBUG_FMT
 | |
| 		    "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
 | |
| 		    ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
 | |
| 		    le32_to_cpu(mpi_reply->IOCLogInfo));
 | |
| 
 | |
| 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 | |
| 	    mpi_request->Function ==
 | |
| 	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
 | |
| 		Mpi2SCSIIOReply_t *scsi_reply =
 | |
| 		    (Mpi2SCSIIOReply_t *)mpi_reply;
 | |
| 		if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
 | |
| 			printk(MPT2SAS_DEBUG_FMT
 | |
| 			    "\tscsi_state(0x%02x), scsi_status"
 | |
| 			    "(0x%02x)\n", ioc->name,
 | |
| 			    scsi_reply->SCSIState,
 | |
| 			    scsi_reply->SCSIStatus);
 | |
| 	}
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_done - ctl module completion routine
 | |
|  * @ioc: per adapter object
 | |
|  * @smid: system request message index
 | |
|  * @msix_index: MSIX table index supplied by the OS
 | |
|  * @reply: reply message frame(lower 32bit addr)
 | |
|  * Context: none.
 | |
|  *
 | |
|  * The callback handler when using ioc->ctl_cb_idx.
 | |
|  *
 | |
|  * Return 1 meaning mf should be freed from _base_interrupt
 | |
|  *        0 means the mf is freed from this function.
 | |
|  */
 | |
| u8
 | |
| mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 | |
| 	u32 reply)
 | |
| {
 | |
| 	MPI2DefaultReply_t *mpi_reply;
 | |
| 
 | |
| 	if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
 | |
| 		return 1;
 | |
| 	if (ioc->ctl_cmds.smid != smid)
 | |
| 		return 1;
 | |
| 	ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
 | |
| 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 | |
| 	if (mpi_reply) {
 | |
| 		memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 | |
| 		ioc->ctl_cmds.status |= MPT2_CMD_REPLY_VALID;
 | |
| 	}
 | |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 | |
| 	_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
 | |
| #endif
 | |
| 	ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
 | |
| 	complete(&ioc->ctl_cmds.done);
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_check_event_type - determines when an event needs logging
 | |
|  * @ioc: per adapter object
 | |
|  * @event: firmware event
 | |
|  *
 | |
|  * The bitmask in ioc->event_type[] indicates which events should be
 | |
|  * be saved in the driver event_log.  This bitmask is set by application.
 | |
|  *
 | |
|  * Returns 1 when event should be captured, or zero means no match.
 | |
|  */
 | |
| static int
 | |
| _ctl_check_event_type(struct MPT2SAS_ADAPTER *ioc, u16 event)
 | |
| {
 | |
| 	u16 i;
 | |
| 	u32 desired_event;
 | |
| 
 | |
| 	if (event >= 128 || !event || !ioc->event_log)
 | |
| 		return 0;
 | |
| 
 | |
| 	desired_event = (1 << (event % 32));
 | |
| 	if (!desired_event)
 | |
| 		desired_event = 1;
 | |
| 	i = event / 32;
 | |
| 	return desired_event & ioc->event_type[i];
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_add_to_event_log - add event
 | |
|  * @ioc: per adapter object
 | |
|  * @mpi_reply: reply message frame
 | |
|  *
 | |
|  * Return nothing.
 | |
|  */
 | |
| void
 | |
| mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
 | |
|     Mpi2EventNotificationReply_t *mpi_reply)
 | |
| {
 | |
| 	struct MPT2_IOCTL_EVENTS *event_log;
 | |
| 	u16 event;
 | |
| 	int i;
 | |
| 	u32 sz, event_data_sz;
 | |
| 	u8 send_aen = 0;
 | |
| 
 | |
| 	if (!ioc->event_log)
 | |
| 		return;
 | |
| 
 | |
| 	event = le16_to_cpu(mpi_reply->Event);
 | |
| 
 | |
| 	if (_ctl_check_event_type(ioc, event)) {
 | |
| 
 | |
| 		/* insert entry into circular event_log */
 | |
| 		i = ioc->event_context % MPT2SAS_CTL_EVENT_LOG_SIZE;
 | |
| 		event_log = ioc->event_log;
 | |
| 		event_log[i].event = event;
 | |
| 		event_log[i].context = ioc->event_context++;
 | |
| 
 | |
| 		event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
 | |
| 		sz = min_t(u32, event_data_sz, MPT2_EVENT_DATA_SIZE);
 | |
| 		memset(event_log[i].data, 0, MPT2_EVENT_DATA_SIZE);
 | |
| 		memcpy(event_log[i].data, mpi_reply->EventData, sz);
 | |
| 		send_aen = 1;
 | |
| 	}
 | |
| 
 | |
| 	/* This aen_event_read_flag flag is set until the
 | |
| 	 * application has read the event log.
 | |
| 	 * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
 | |
| 	 */
 | |
| 	if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
 | |
| 	    (send_aen && !ioc->aen_event_read_flag)) {
 | |
| 		ioc->aen_event_read_flag = 1;
 | |
| 		wake_up_interruptible(&ctl_poll_wait);
 | |
| 		if (async_queue)
 | |
| 			kill_fasync(&async_queue, SIGIO, POLL_IN);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
 | |
|  * @ioc: per adapter object
 | |
|  * @msix_index: MSIX table index supplied by the OS
 | |
|  * @reply: reply message frame(lower 32bit addr)
 | |
|  * Context: interrupt.
 | |
|  *
 | |
|  * This function merely adds a new work task into ioc->firmware_event_thread.
 | |
|  * The tasks are worked from _firmware_event_work in user context.
 | |
|  *
 | |
|  * Return 1 meaning mf should be freed from _base_interrupt
 | |
|  *        0 means the mf is freed from this function.
 | |
|  */
 | |
| u8
 | |
| mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
 | |
| 	u32 reply)
 | |
| {
 | |
| 	Mpi2EventNotificationReply_t *mpi_reply;
 | |
| 
 | |
| 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 | |
| 	mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_verify_adapter - validates ioc_number passed from application
 | |
|  * @ioc: per adapter object
 | |
|  * @iocpp: The ioc pointer is returned in this.
 | |
|  *
 | |
|  * Return (-1) means error, else ioc_number.
 | |
|  */
 | |
| static int
 | |
| _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
 | |
| {
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
 | |
| 		if (ioc->id != ioc_number)
 | |
| 			continue;
 | |
| 		*iocpp = ioc;
 | |
| 		return ioc_number;
 | |
| 	}
 | |
| 	*iocpp = NULL;
 | |
| 	return -1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_reset_handler - reset callback handler (for ctl)
 | |
|  * @ioc: per adapter object
 | |
|  * @reset_phase: phase
 | |
|  *
 | |
|  * The handler for doing any required cleanup or initialization.
 | |
|  *
 | |
|  * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
 | |
|  * MPT2_IOC_DONE_RESET
 | |
|  */
 | |
| void
 | |
| mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 | |
| {
 | |
| 	int i;
 | |
| 	u8 issue_reset;
 | |
| 
 | |
| 	switch (reset_phase) {
 | |
| 	case MPT2_IOC_PRE_RESET:
 | |
| 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
 | |
| 		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
 | |
| 			if (!(ioc->diag_buffer_status[i] &
 | |
| 			    MPT2_DIAG_BUFFER_IS_REGISTERED))
 | |
| 				continue;
 | |
| 			if ((ioc->diag_buffer_status[i] &
 | |
| 			    MPT2_DIAG_BUFFER_IS_RELEASED))
 | |
| 				continue;
 | |
| 			_ctl_send_release(ioc, i, &issue_reset);
 | |
| 		}
 | |
| 		break;
 | |
| 	case MPT2_IOC_AFTER_RESET:
 | |
| 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
 | |
| 		if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
 | |
| 			ioc->ctl_cmds.status |= MPT2_CMD_RESET;
 | |
| 			mpt2sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
 | |
| 			complete(&ioc->ctl_cmds.done);
 | |
| 		}
 | |
| 		break;
 | |
| 	case MPT2_IOC_DONE_RESET:
 | |
| 		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
 | |
| 
 | |
| 		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
 | |
| 			if (!(ioc->diag_buffer_status[i] &
 | |
| 			    MPT2_DIAG_BUFFER_IS_REGISTERED))
 | |
| 				continue;
 | |
| 			if ((ioc->diag_buffer_status[i] &
 | |
| 			    MPT2_DIAG_BUFFER_IS_RELEASED))
 | |
| 				continue;
 | |
| 			ioc->diag_buffer_status[i] |=
 | |
| 			    MPT2_DIAG_BUFFER_IS_DIAG_RESET;
 | |
| 		}
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_fasync -
 | |
|  * @fd -
 | |
|  * @filep -
 | |
|  * @mode -
 | |
|  *
 | |
|  * Called when application request fasyn callback handler.
 | |
|  */
 | |
| static int
 | |
| _ctl_fasync(int fd, struct file *filep, int mode)
 | |
| {
 | |
| 	return fasync_helper(fd, filep, mode, &async_queue);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_release -
 | |
|  * @inode -
 | |
|  * @filep -
 | |
|  *
 | |
|  * Called when application releases the fasyn callback handler.
 | |
|  */
 | |
| static int
 | |
| _ctl_release(struct inode *inode, struct file *filep)
 | |
| {
 | |
| 	return fasync_helper(-1, filep, 0, &async_queue);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_poll -
 | |
|  * @file -
 | |
|  * @wait -
 | |
|  *
 | |
|  */
 | |
| static unsigned int
 | |
| _ctl_poll(struct file *filep, poll_table *wait)
 | |
| {
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 	poll_wait(filep, &ctl_poll_wait, wait);
 | |
| 
 | |
| 	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
 | |
| 		if (ioc->aen_event_read_flag)
 | |
| 			return POLLIN | POLLRDNORM;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_set_task_mid - assign an active smid to tm request
 | |
|  * @ioc: per adapter object
 | |
|  * @karg - (struct mpt2_ioctl_command)
 | |
|  * @tm_request - pointer to mf from user space
 | |
|  *
 | |
|  * Returns 0 when an smid if found, else fail.
 | |
|  * during failure, the reply frame is filled.
 | |
|  */
 | |
| static int
 | |
| _ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
 | |
|     Mpi2SCSITaskManagementRequest_t *tm_request)
 | |
| {
 | |
| 	u8 found = 0;
 | |
| 	u16 i;
 | |
| 	u16 handle;
 | |
| 	struct scsi_cmnd *scmd;
 | |
| 	struct MPT2SAS_DEVICE *priv_data;
 | |
| 	unsigned long flags;
 | |
| 	Mpi2SCSITaskManagementReply_t *tm_reply;
 | |
| 	u32 sz;
 | |
| 	u32 lun;
 | |
| 	char *desc = NULL;
 | |
| 
 | |
| 	if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
 | |
| 		desc = "abort_task";
 | |
| 	else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
 | |
| 		desc = "query_task";
 | |
| 	else
 | |
| 		return 0;
 | |
| 
 | |
| 	lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
 | |
| 
 | |
| 	handle = le16_to_cpu(tm_request->DevHandle);
 | |
| 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 | |
| 	for (i = ioc->scsiio_depth; i && !found; i--) {
 | |
| 		scmd = ioc->scsi_lookup[i - 1].scmd;
 | |
| 		if (scmd == NULL || scmd->device == NULL ||
 | |
| 		    scmd->device->hostdata == NULL)
 | |
| 			continue;
 | |
| 		if (lun != scmd->device->lun)
 | |
| 			continue;
 | |
| 		priv_data = scmd->device->hostdata;
 | |
| 		if (priv_data->sas_target == NULL)
 | |
| 			continue;
 | |
| 		if (priv_data->sas_target->handle != handle)
 | |
| 			continue;
 | |
| 		tm_request->TaskMID = cpu_to_le16(ioc->scsi_lookup[i - 1].smid);
 | |
| 		found = 1;
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 | |
| 
 | |
| 	if (!found) {
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
 | |
| 		    desc, tm_request->DevHandle, lun));
 | |
| 		tm_reply = ioc->ctl_cmds.reply;
 | |
| 		tm_reply->DevHandle = tm_request->DevHandle;
 | |
| 		tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
 | |
| 		tm_reply->TaskType = tm_request->TaskType;
 | |
| 		tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
 | |
| 		tm_reply->VP_ID = tm_request->VP_ID;
 | |
| 		tm_reply->VF_ID = tm_request->VF_ID;
 | |
| 		sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
 | |
| 		if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
 | |
| 		    sz))
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 	    "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
 | |
| 	    desc, tm_request->DevHandle, lun, tm_request->TaskMID));
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_do_mpt_command - main handler for MPT2COMMAND opcode
 | |
|  * @ioc: per adapter object
 | |
|  * @karg - (struct mpt2_ioctl_command)
 | |
|  * @mf - pointer to mf in user space
 | |
|  * @state - NON_BLOCKING or BLOCKING
 | |
|  */
 | |
| static long
 | |
| _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
 | |
|     struct mpt2_ioctl_command karg, void __user *mf, enum block_state state)
 | |
| {
 | |
| 	MPI2RequestHeader_t *mpi_request;
 | |
| 	MPI2DefaultReply_t *mpi_reply;
 | |
| 	u32 ioc_state;
 | |
| 	u16 ioc_status;
 | |
| 	u16 smid;
 | |
| 	unsigned long timeout, timeleft;
 | |
| 	u8 issue_reset;
 | |
| 	u32 sz;
 | |
| 	void *psge;
 | |
| 	void *priv_sense = NULL;
 | |
| 	void *data_out = NULL;
 | |
| 	dma_addr_t data_out_dma;
 | |
| 	size_t data_out_sz = 0;
 | |
| 	void *data_in = NULL;
 | |
| 	dma_addr_t data_in_dma;
 | |
| 	size_t data_in_sz = 0;
 | |
| 	u32 sgl_flags;
 | |
| 	long ret;
 | |
| 	u16 wait_state_count;
 | |
| 
 | |
| 	issue_reset = 0;
 | |
| 
 | |
| 	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
 | |
| 		return -EAGAIN;
 | |
| 	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		ret = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	wait_state_count = 0;
 | |
| 	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
 | |
| 	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
 | |
| 		if (wait_state_count++ == 10) {
 | |
| 			printk(MPT2SAS_ERR_FMT
 | |
| 			    "%s: failed due to ioc not operational\n",
 | |
| 			    ioc->name, __func__);
 | |
| 			ret = -EFAULT;
 | |
| 			goto out;
 | |
| 		}
 | |
| 		ssleep(1);
 | |
| 		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
 | |
| 		printk(MPT2SAS_INFO_FMT "%s: waiting for "
 | |
| 		    "operational state(count=%d)\n", ioc->name,
 | |
| 		    __func__, wait_state_count);
 | |
| 	}
 | |
| 	if (wait_state_count)
 | |
| 		printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
 | |
| 		    ioc->name, __func__);
 | |
| 
 | |
| 	smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
 | |
| 	if (!smid) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		ret = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	ret = 0;
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
 | |
| 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 | |
| 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 | |
| 	ioc->ctl_cmds.smid = smid;
 | |
| 	data_out_sz = karg.data_out_size;
 | |
| 	data_in_sz = karg.data_in_size;
 | |
| 
 | |
| 	/* copy in request message frame from user */
 | |
| 	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,
 | |
| 		    __func__);
 | |
| 		ret = -EFAULT;
 | |
| 		mpt2sas_base_free_smid(ioc, smid);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 | |
| 	    mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
 | |
| 		if (!mpi_request->FunctionDependent1 ||
 | |
| 		    mpi_request->FunctionDependent1 >
 | |
| 		    cpu_to_le16(ioc->facts.MaxDevHandle)) {
 | |
| 			ret = -EINVAL;
 | |
| 			mpt2sas_base_free_smid(ioc, smid);
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* obtain dma-able memory for data transfer */
 | |
| 	if (data_out_sz) /* WRITE */ {
 | |
| 		data_out = pci_alloc_consistent(ioc->pdev, data_out_sz,
 | |
| 		    &data_out_dma);
 | |
| 		if (!data_out) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret = -ENOMEM;
 | |
| 			mpt2sas_base_free_smid(ioc, smid);
 | |
| 			goto out;
 | |
| 		}
 | |
| 		if (copy_from_user(data_out, karg.data_out_buf_ptr,
 | |
| 			data_out_sz)) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret =  -EFAULT;
 | |
| 			mpt2sas_base_free_smid(ioc, smid);
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (data_in_sz) /* READ */ {
 | |
| 		data_in = pci_alloc_consistent(ioc->pdev, data_in_sz,
 | |
| 		    &data_in_dma);
 | |
| 		if (!data_in) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret = -ENOMEM;
 | |
| 			mpt2sas_base_free_smid(ioc, smid);
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* add scatter gather elements */
 | |
| 	psge = (void *)mpi_request + (karg.data_sge_offset*4);
 | |
| 
 | |
| 	if (!data_out_sz && !data_in_sz) {
 | |
| 		mpt2sas_base_build_zero_len_sge(ioc, psge);
 | |
| 	} else if (data_out_sz && data_in_sz) {
 | |
| 		/* WRITE sgel first */
 | |
| 		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
 | |
| 		    MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC);
 | |
| 		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
 | |
| 		ioc->base_add_sg_single(psge, sgl_flags |
 | |
| 		    data_out_sz, data_out_dma);
 | |
| 
 | |
| 		/* incr sgel */
 | |
| 		psge += ioc->sge_size;
 | |
| 
 | |
| 		/* READ sgel last */
 | |
| 		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
 | |
| 		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
 | |
| 		    MPI2_SGE_FLAGS_END_OF_LIST);
 | |
| 		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
 | |
| 		ioc->base_add_sg_single(psge, sgl_flags |
 | |
| 		    data_in_sz, data_in_dma);
 | |
| 	} else if (data_out_sz) /* WRITE */ {
 | |
| 		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
 | |
| 		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
 | |
| 		    MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC);
 | |
| 		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
 | |
| 		ioc->base_add_sg_single(psge, sgl_flags |
 | |
| 		    data_out_sz, data_out_dma);
 | |
| 	} else if (data_in_sz) /* READ */ {
 | |
| 		sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT |
 | |
| 		    MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER |
 | |
| 		    MPI2_SGE_FLAGS_END_OF_LIST);
 | |
| 		sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
 | |
| 		ioc->base_add_sg_single(psge, sgl_flags |
 | |
| 		    data_in_sz, data_in_dma);
 | |
| 	}
 | |
| 
 | |
| 	/* send command to firmware */
 | |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 | |
| 	_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
 | |
| #endif
 | |
| 
 | |
| 	switch (mpi_request->Function) {
 | |
| 	case MPI2_FUNCTION_SCSI_IO_REQUEST:
 | |
| 	case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
 | |
| 	{
 | |
| 		Mpi2SCSIIORequest_t *scsiio_request =
 | |
| 		    (Mpi2SCSIIORequest_t *)mpi_request;
 | |
| 		scsiio_request->SenseBufferLowAddress =
 | |
| 		    (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
 | |
| 		priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid);
 | |
| 		memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE);
 | |
| 		mpt2sas_base_put_smid_scsi_io(ioc, smid,
 | |
| 		    le16_to_cpu(mpi_request->FunctionDependent1));
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_SCSI_TASK_MGMT:
 | |
| 	{
 | |
| 		Mpi2SCSITaskManagementRequest_t *tm_request =
 | |
| 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
 | |
| 
 | |
| 		if (tm_request->TaskType ==
 | |
| 		    MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
 | |
| 		    tm_request->TaskType ==
 | |
| 		    MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
 | |
| 			if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
 | |
| 				mpt2sas_base_free_smid(ioc, smid);
 | |
| 				goto out;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		mutex_lock(&ioc->tm_cmds.mutex);
 | |
| 		mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
 | |
| 		    tm_request->DevHandle));
 | |
| 		mpt2sas_base_put_smid_hi_priority(ioc, smid);
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_SMP_PASSTHROUGH:
 | |
| 	{
 | |
| 		Mpi2SmpPassthroughRequest_t *smp_request =
 | |
| 		    (Mpi2SmpPassthroughRequest_t *)mpi_request;
 | |
| 		u8 *data;
 | |
| 
 | |
| 		/* ioc determines which port to use */
 | |
| 		smp_request->PhysicalPort = 0xFF;
 | |
| 		if (smp_request->PassthroughFlags &
 | |
| 		    MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
 | |
| 			data = (u8 *)&smp_request->SGL;
 | |
| 		else
 | |
| 			data = data_out;
 | |
| 
 | |
| 		if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
 | |
| 			ioc->ioc_link_reset_in_progress = 1;
 | |
| 			ioc->ignore_loginfos = 1;
 | |
| 		}
 | |
| 		mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 | |
| 	{
 | |
| 		Mpi2SasIoUnitControlRequest_t *sasiounit_request =
 | |
| 		    (Mpi2SasIoUnitControlRequest_t *)mpi_request;
 | |
| 
 | |
| 		if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
 | |
| 		    || sasiounit_request->Operation ==
 | |
| 		    MPI2_SAS_OP_PHY_LINK_RESET) {
 | |
| 			ioc->ioc_link_reset_in_progress = 1;
 | |
| 			ioc->ignore_loginfos = 1;
 | |
| 		}
 | |
| 		mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 		break;
 | |
| 	}
 | |
| 	default:
 | |
| 		mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.timeout < MPT2_IOCTL_DEFAULT_TIMEOUT)
 | |
| 		timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
 | |
| 	else
 | |
| 		timeout = karg.timeout;
 | |
| 	init_completion(&ioc->ctl_cmds.done);
 | |
| 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 | |
| 	    timeout*HZ);
 | |
| 	if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
 | |
| 		Mpi2SCSITaskManagementRequest_t *tm_request =
 | |
| 		    (Mpi2SCSITaskManagementRequest_t *)mpi_request;
 | |
| 		mutex_unlock(&ioc->tm_cmds.mutex);
 | |
| 		mpt2sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
 | |
| 		    tm_request->DevHandle));
 | |
| 	} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
 | |
| 	    mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
 | |
| 		ioc->ioc_link_reset_in_progress) {
 | |
| 		ioc->ioc_link_reset_in_progress = 0;
 | |
| 		ioc->ignore_loginfos = 0;
 | |
| 	}
 | |
| 	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
 | |
| 		    __func__);
 | |
| 		_debug_dump_mf(mpi_request, karg.data_sge_offset);
 | |
| 		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
 | |
| 			issue_reset = 1;
 | |
| 		goto issue_host_reset;
 | |
| 	}
 | |
| 
 | |
| 	mpi_reply = ioc->ctl_cmds.reply;
 | |
| 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 | |
| 
 | |
| #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 | |
| 	if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
 | |
| 	    (ioc->logging_level & MPT_DEBUG_TM)) {
 | |
| 		Mpi2SCSITaskManagementReply_t *tm_reply =
 | |
| 		    (Mpi2SCSITaskManagementReply_t *)mpi_reply;
 | |
| 
 | |
| 		printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: "
 | |
| 		    "IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
 | |
| 		    "TerminationCount(0x%08x)\n", ioc->name,
 | |
| 		    tm_reply->IOCStatus, tm_reply->IOCLogInfo,
 | |
| 		    tm_reply->TerminationCount);
 | |
| 	}
 | |
| #endif
 | |
| 	/* copy out xdata to user */
 | |
| 	if (data_in_sz) {
 | |
| 		if (copy_to_user(karg.data_in_buf_ptr, data_in,
 | |
| 		    data_in_sz)) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret = -ENODATA;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* copy out reply message frame to user */
 | |
| 	if (karg.max_reply_bytes) {
 | |
| 		sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
 | |
| 		if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
 | |
| 		    sz)) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret = -ENODATA;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* copy out sense to user */
 | |
| 	if (karg.max_sense_bytes && (mpi_request->Function ==
 | |
| 	    MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
 | |
| 	    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
 | |
| 		sz = min_t(u32, karg.max_sense_bytes, SCSI_SENSE_BUFFERSIZE);
 | |
| 		if (copy_to_user(karg.sense_data_ptr, priv_sense, sz)) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__,
 | |
| 			    __LINE__, __func__);
 | |
| 			ret = -ENODATA;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
|  issue_host_reset:
 | |
| 	if (issue_reset) {
 | |
| 		if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 | |
| 		    mpi_request->Function ==
 | |
| 		    MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
 | |
| 			printk(MPT2SAS_INFO_FMT "issue target reset: handle "
 | |
| 			    "= (0x%04x)\n", ioc->name,
 | |
| 			    mpi_request->FunctionDependent1);
 | |
| 			mutex_lock(&ioc->tm_cmds.mutex);
 | |
| 			mpt2sas_scsih_issue_tm(ioc,
 | |
| 			    mpi_request->FunctionDependent1, 0,
 | |
| 			    MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, 10);
 | |
| 			ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
 | |
| 			mutex_unlock(&ioc->tm_cmds.mutex);
 | |
| 		} else
 | |
| 			mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 | |
| 			    FORCE_BIG_HAMMER);
 | |
| 	}
 | |
| 
 | |
|  out:
 | |
| 
 | |
| 	/* free memory associated with sg buffers */
 | |
| 	if (data_in)
 | |
| 		pci_free_consistent(ioc->pdev, data_in_sz, data_in,
 | |
| 		    data_in_dma);
 | |
| 
 | |
| 	if (data_out)
 | |
| 		pci_free_consistent(ioc->pdev, data_out_sz, data_out,
 | |
| 		    data_out_dma);
 | |
| 
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 | |
| 	mutex_unlock(&ioc->ctl_cmds.mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_getiocinfo - main handler for MPT2IOCINFO opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_getiocinfo(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_iocinfo karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	u8 revision;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	memset(&karg, 0 , sizeof(karg));
 | |
| 	karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
 | |
| 	if (ioc->pfacts)
 | |
| 		karg.port_number = ioc->pfacts[0].PortNumber;
 | |
| 	pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
 | |
| 	karg.hw_rev = revision;
 | |
| 	karg.pci_id = ioc->pdev->device;
 | |
| 	karg.subsystem_device = ioc->pdev->subsystem_device;
 | |
| 	karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
 | |
| 	karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
 | |
| 	karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
 | |
| 	karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
 | |
| 	karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
 | |
| 	karg.firmware_version = ioc->facts.FWVersion.Word;
 | |
| 	strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
 | |
| 	strcat(karg.driver_version, "-");
 | |
| 	strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
 | |
| 	karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
 | |
| 
 | |
| 	if (copy_to_user(arg, &karg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_eventquery - main handler for MPT2EVENTQUERY opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_eventquery(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_eventquery karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
 | |
| 	memcpy(karg.event_types, ioc->event_type,
 | |
| 	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
 | |
| 
 | |
| 	if (copy_to_user(arg, &karg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_eventenable - main handler for MPT2EVENTENABLE opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_eventenable(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_eventenable karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	if (ioc->event_log)
 | |
| 		return 0;
 | |
| 	memcpy(ioc->event_type, karg.event_types,
 | |
| 	    MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
 | |
| 	mpt2sas_base_validate_event_type(ioc, ioc->event_type);
 | |
| 
 | |
| 	/* initialize event_log */
 | |
| 	ioc->event_context = 0;
 | |
| 	ioc->aen_event_read_flag = 0;
 | |
| 	ioc->event_log = kcalloc(MPT2SAS_CTL_EVENT_LOG_SIZE,
 | |
| 	    sizeof(struct MPT2_IOCTL_EVENTS), GFP_KERNEL);
 | |
| 	if (!ioc->event_log) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_eventreport - main handler for MPT2EVENTREPORT opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_eventreport(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_eventreport karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	u32 number_bytes, max_events, max;
 | |
| 	struct mpt2_ioctl_eventreport __user *uarg = arg;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	number_bytes = karg.hdr.max_data_size -
 | |
| 	    sizeof(struct mpt2_ioctl_header);
 | |
| 	max_events = number_bytes/sizeof(struct MPT2_IOCTL_EVENTS);
 | |
| 	max = min_t(u32, MPT2SAS_CTL_EVENT_LOG_SIZE, max_events);
 | |
| 
 | |
| 	/* If fewer than 1 event is requested, there must have
 | |
| 	 * been some type of error.
 | |
| 	 */
 | |
| 	if (!max || !ioc->event_log)
 | |
| 		return -ENODATA;
 | |
| 
 | |
| 	number_bytes = max * sizeof(struct MPT2_IOCTL_EVENTS);
 | |
| 	if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 
 | |
| 	/* reset flag so SIGIO can restart */
 | |
| 	ioc->aen_event_read_flag = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_do_reset - main handler for MPT2HARDRESET opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_do_reset(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_diag_reset karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	int retval;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 | |
| 	    FORCE_BIG_HAMMER);
 | |
| 	printk(MPT2SAS_INFO_FMT "host reset: %s\n",
 | |
| 	    ioc->name, ((!retval) ? "SUCCESS" : "FAILED"));
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_btdh_search_sas_device - searching for sas device
 | |
|  * @ioc: per adapter object
 | |
|  * @btdh: btdh ioctl payload
 | |
|  */
 | |
| static int
 | |
| _ctl_btdh_search_sas_device(struct MPT2SAS_ADAPTER *ioc,
 | |
|     struct mpt2_ioctl_btdh_mapping *btdh)
 | |
| {
 | |
| 	struct _sas_device *sas_device;
 | |
| 	unsigned long flags;
 | |
| 	int rc = 0;
 | |
| 
 | |
| 	if (list_empty(&ioc->sas_device_list))
 | |
| 		return rc;
 | |
| 
 | |
| 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 | |
| 	list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
 | |
| 		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
 | |
| 		    btdh->handle == sas_device->handle) {
 | |
| 			btdh->bus = sas_device->channel;
 | |
| 			btdh->id = sas_device->id;
 | |
| 			rc = 1;
 | |
| 			goto out;
 | |
| 		} else if (btdh->bus == sas_device->channel && btdh->id ==
 | |
| 		    sas_device->id && btdh->handle == 0xFFFF) {
 | |
| 			btdh->handle = sas_device->handle;
 | |
| 			rc = 1;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
|  out:
 | |
| 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_btdh_search_raid_device - searching for raid device
 | |
|  * @ioc: per adapter object
 | |
|  * @btdh: btdh ioctl payload
 | |
|  */
 | |
| static int
 | |
| _ctl_btdh_search_raid_device(struct MPT2SAS_ADAPTER *ioc,
 | |
|     struct mpt2_ioctl_btdh_mapping *btdh)
 | |
| {
 | |
| 	struct _raid_device *raid_device;
 | |
| 	unsigned long flags;
 | |
| 	int rc = 0;
 | |
| 
 | |
| 	if (list_empty(&ioc->raid_device_list))
 | |
| 		return rc;
 | |
| 
 | |
| 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
 | |
| 	list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 | |
| 		if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
 | |
| 		    btdh->handle == raid_device->handle) {
 | |
| 			btdh->bus = raid_device->channel;
 | |
| 			btdh->id = raid_device->id;
 | |
| 			rc = 1;
 | |
| 			goto out;
 | |
| 		} else if (btdh->bus == raid_device->channel && btdh->id ==
 | |
| 		    raid_device->id && btdh->handle == 0xFFFF) {
 | |
| 			btdh->handle = raid_device->handle;
 | |
| 			rc = 1;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
|  out:
 | |
| 	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_btdh_mapping - main handler for MPT2BTDHMAPPING opcode
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  */
 | |
| static long
 | |
| _ctl_btdh_mapping(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_btdh_mapping karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	int rc;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	rc = _ctl_btdh_search_sas_device(ioc, &karg);
 | |
| 	if (!rc)
 | |
| 		_ctl_btdh_search_raid_device(ioc, &karg);
 | |
| 
 | |
| 	if (copy_to_user(arg, &karg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_capability - return diag buffer capability
 | |
|  * @ioc: per adapter object
 | |
|  * @buffer_type: specifies either TRACE or SNAPSHOT
 | |
|  *
 | |
|  * returns 1 when diag buffer support is enabled in firmware
 | |
|  */
 | |
| static u8
 | |
| _ctl_diag_capability(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type)
 | |
| {
 | |
| 	u8 rc = 0;
 | |
| 
 | |
| 	switch (buffer_type) {
 | |
| 	case MPI2_DIAG_BUF_TYPE_TRACE:
 | |
| 		if (ioc->facts.IOCCapabilities &
 | |
| 		    MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
 | |
| 			rc = 1;
 | |
| 		break;
 | |
| 	case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
 | |
| 		if (ioc->facts.IOCCapabilities &
 | |
| 		    MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
 | |
| 			rc = 1;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_register - application register with driver
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  * @state - NON_BLOCKING or BLOCKING
 | |
|  *
 | |
|  * This will allow the driver to setup any required buffers that will be
 | |
|  * needed by firmware to communicate with the driver.
 | |
|  */
 | |
| static long
 | |
| _ctl_diag_register(void __user *arg, enum block_state state)
 | |
| {
 | |
| 	struct mpt2_diag_register karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	int rc, i;
 | |
| 	void *request_data = NULL;
 | |
| 	dma_addr_t request_data_dma;
 | |
| 	u32 request_data_sz = 0;
 | |
| 	Mpi2DiagBufferPostRequest_t *mpi_request;
 | |
| 	Mpi2DiagBufferPostReply_t *mpi_reply;
 | |
| 	u8 buffer_type;
 | |
| 	unsigned long timeleft;
 | |
| 	u16 smid;
 | |
| 	u16 ioc_status;
 | |
| 	u8 issue_reset = 0;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	buffer_type = karg.buffer_type;
 | |
| 	if (!_ctl_diag_capability(ioc, buffer_type)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	if (ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_REGISTERED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: already has a registered "
 | |
| 		    "buffer for buffer_type(0x%02x)\n", ioc->name, __func__,
 | |
| 		    buffer_type);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.requested_buffer_size % 4)  {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
 | |
| 		    "is not 4 byte aligned\n", ioc->name, __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
 | |
| 		return -EAGAIN;
 | |
| 	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
 | |
| 	if (!smid) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	rc = 0;
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
 | |
| 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 | |
| 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 | |
| 	ioc->ctl_cmds.smid = smid;
 | |
| 
 | |
| 	request_data = ioc->diag_buffer[buffer_type];
 | |
| 	request_data_sz = karg.requested_buffer_size;
 | |
| 	ioc->unique_id[buffer_type] = karg.unique_id;
 | |
| 	ioc->diag_buffer_status[buffer_type] = 0;
 | |
| 	memcpy(ioc->product_specific[buffer_type], karg.product_specific,
 | |
| 	    MPT2_PRODUCT_SPECIFIC_DWORDS);
 | |
| 	ioc->diagnostic_flags[buffer_type] = karg.diagnostic_flags;
 | |
| 
 | |
| 	if (request_data) {
 | |
| 		request_data_dma = ioc->diag_buffer_dma[buffer_type];
 | |
| 		if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
 | |
| 			pci_free_consistent(ioc->pdev,
 | |
| 			    ioc->diag_buffer_sz[buffer_type],
 | |
| 			    request_data, request_data_dma);
 | |
| 			request_data = NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (request_data == NULL) {
 | |
| 		ioc->diag_buffer_sz[buffer_type] = 0;
 | |
| 		ioc->diag_buffer_dma[buffer_type] = 0;
 | |
| 		request_data = pci_alloc_consistent(
 | |
| 			ioc->pdev, request_data_sz, &request_data_dma);
 | |
| 		if (request_data == NULL) {
 | |
| 			printk(MPT2SAS_ERR_FMT "%s: failed allocating memory"
 | |
| 			    " for diag buffers, requested size(%d)\n",
 | |
| 			    ioc->name, __func__, request_data_sz);
 | |
| 			mpt2sas_base_free_smid(ioc, smid);
 | |
| 			return -ENOMEM;
 | |
| 		}
 | |
| 		ioc->diag_buffer[buffer_type] = request_data;
 | |
| 		ioc->diag_buffer_sz[buffer_type] = request_data_sz;
 | |
| 		ioc->diag_buffer_dma[buffer_type] = request_data_dma;
 | |
| 	}
 | |
| 
 | |
| 	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
 | |
| 	mpi_request->BufferType = karg.buffer_type;
 | |
| 	mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags);
 | |
| 	mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
 | |
| 	mpi_request->BufferLength = cpu_to_le32(request_data_sz);
 | |
| 	mpi_request->VF_ID = 0; /* TODO */
 | |
| 	mpi_request->VP_ID = 0;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), "
 | |
| 	    "dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
 | |
| 	    (unsigned long long)request_data_dma, mpi_request->BufferLength));
 | |
| 
 | |
| 	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
 | |
| 		mpi_request->ProductSpecific[i] =
 | |
| 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
 | |
| 
 | |
| 	mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 	init_completion(&ioc->ctl_cmds.done);
 | |
| 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 | |
| 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 | |
| 
 | |
| 	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
 | |
| 		    __func__);
 | |
| 		_debug_dump_mf(mpi_request,
 | |
| 		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
 | |
| 		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
 | |
| 			issue_reset = 1;
 | |
| 		goto issue_host_reset;
 | |
| 	}
 | |
| 
 | |
| 	/* process the completed Reply Message Frame */
 | |
| 	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EFAULT;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	mpi_reply = ioc->ctl_cmds.reply;
 | |
| 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 | |
| 
 | |
| 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
 | |
| 		ioc->diag_buffer_status[buffer_type] |=
 | |
| 			MPT2_DIAG_BUFFER_IS_REGISTERED;
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
 | |
| 		    ioc->name, __func__));
 | |
| 	} else {
 | |
| 		printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
 | |
| 		    "log_info(0x%08x)\n", ioc->name, __func__,
 | |
| 		    ioc_status, mpi_reply->IOCLogInfo);
 | |
| 		rc = -EFAULT;
 | |
| 	}
 | |
| 
 | |
|  issue_host_reset:
 | |
| 	if (issue_reset)
 | |
| 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 | |
| 		    FORCE_BIG_HAMMER);
 | |
| 
 | |
|  out:
 | |
| 
 | |
| 	if (rc && request_data)
 | |
| 		pci_free_consistent(ioc->pdev, request_data_sz,
 | |
| 		    request_data, request_data_dma);
 | |
| 
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 | |
| 	mutex_unlock(&ioc->ctl_cmds.mutex);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_unregister - application unregister with driver
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  *
 | |
|  * This will allow the driver to cleanup any memory allocated for diag
 | |
|  * messages and to free up any resources.
 | |
|  */
 | |
| static long
 | |
| _ctl_diag_unregister(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_diag_unregister karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	void *request_data;
 | |
| 	dma_addr_t request_data_dma;
 | |
| 	u32 request_data_sz;
 | |
| 	u8 buffer_type;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	buffer_type = karg.unique_id & 0x000000ff;
 | |
| 	if (!_ctl_diag_capability(ioc, buffer_type)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) has not been "
 | |
| 		    "released\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, karg.unique_id);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	request_data = ioc->diag_buffer[buffer_type];
 | |
| 	if (!request_data) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	request_data_sz = ioc->diag_buffer_sz[buffer_type];
 | |
| 	request_data_dma = ioc->diag_buffer_dma[buffer_type];
 | |
| 	pci_free_consistent(ioc->pdev, request_data_sz,
 | |
| 	    request_data, request_data_dma);
 | |
| 	ioc->diag_buffer[buffer_type] = NULL;
 | |
| 	ioc->diag_buffer_status[buffer_type] = 0;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_query - query relevant info associated with diag buffers
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  *
 | |
|  * The application will send only buffer_type and unique_id.  Driver will
 | |
|  * inspect unique_id first, if valid, fill in all the info.  If unique_id is
 | |
|  * 0x00, the driver will return info specified by Buffer Type.
 | |
|  */
 | |
| static long
 | |
| _ctl_diag_query(void __user *arg)
 | |
| {
 | |
| 	struct mpt2_diag_query karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	void *request_data;
 | |
| 	int i;
 | |
| 	u8 buffer_type;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	karg.application_flags = 0;
 | |
| 	buffer_type = karg.buffer_type;
 | |
| 
 | |
| 	if (!_ctl_diag_capability(ioc, buffer_type)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.unique_id & 0xffffff00) {
 | |
| 		if (karg.unique_id != ioc->unique_id[buffer_type]) {
 | |
| 			printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
 | |
| 			    "registered\n", ioc->name, __func__,
 | |
| 			    karg.unique_id);
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	request_data = ioc->diag_buffer[buffer_type];
 | |
| 	if (!request_data) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	if (ioc->diag_buffer_status[buffer_type] & MPT2_DIAG_BUFFER_IS_RELEASED)
 | |
| 		karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
 | |
| 		    MPT2_APP_FLAGS_BUFFER_VALID);
 | |
| 	else
 | |
| 		karg.application_flags = (MPT2_APP_FLAGS_APP_OWNED |
 | |
| 		    MPT2_APP_FLAGS_BUFFER_VALID |
 | |
| 		    MPT2_APP_FLAGS_FW_BUFFER_ACCESS);
 | |
| 
 | |
| 	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
 | |
| 		karg.product_specific[i] =
 | |
| 		    ioc->product_specific[buffer_type][i];
 | |
| 
 | |
| 	karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
 | |
| 	karg.driver_added_buffer_size = 0;
 | |
| 	karg.unique_id = ioc->unique_id[buffer_type];
 | |
| 	karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
 | |
| 
 | |
| 	if (copy_to_user(arg, &karg, sizeof(struct mpt2_diag_query))) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: unable to write mpt2_diag_query "
 | |
| 		    "data @ %p\n", ioc->name, __func__, arg);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_send_release - Diag Release Message
 | |
|  * @ioc: per adapter object
 | |
|  * @buffer_type - specifies either TRACE or SNAPSHOT
 | |
|  * @issue_reset - specifies whether host reset is required.
 | |
|  *
 | |
|  */
 | |
| static int
 | |
| _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
 | |
| {
 | |
| 	Mpi2DiagReleaseRequest_t *mpi_request;
 | |
| 	Mpi2DiagReleaseReply_t *mpi_reply;
 | |
| 	u16 smid;
 | |
| 	u16 ioc_status;
 | |
| 	u32 ioc_state;
 | |
| 	int rc;
 | |
| 	unsigned long timeleft;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	rc = 0;
 | |
| 	*issue_reset = 0;
 | |
| 
 | |
| 	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
 | |
| 	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "skipping due to FAULT state\n", ioc->name,
 | |
| 		    __func__));
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
 | |
| 	if (!smid) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
 | |
| 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 | |
| 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 | |
| 	ioc->ctl_cmds.smid = smid;
 | |
| 
 | |
| 	mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
 | |
| 	mpi_request->BufferType = buffer_type;
 | |
| 	mpi_request->VF_ID = 0; /* TODO */
 | |
| 	mpi_request->VP_ID = 0;
 | |
| 
 | |
| 	mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 	init_completion(&ioc->ctl_cmds.done);
 | |
| 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 | |
| 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 | |
| 
 | |
| 	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
 | |
| 		    __func__);
 | |
| 		_debug_dump_mf(mpi_request,
 | |
| 		    sizeof(Mpi2DiagReleaseRequest_t)/4);
 | |
| 		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
 | |
| 			*issue_reset = 1;
 | |
| 		rc = -EFAULT;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* process the completed Reply Message Frame */
 | |
| 	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EFAULT;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	mpi_reply = ioc->ctl_cmds.reply;
 | |
| 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 | |
| 
 | |
| 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
 | |
| 		ioc->diag_buffer_status[buffer_type] |=
 | |
| 		    MPT2_DIAG_BUFFER_IS_RELEASED;
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
 | |
| 		    ioc->name, __func__));
 | |
| 	} else {
 | |
| 		printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
 | |
| 		    "log_info(0x%08x)\n", ioc->name, __func__,
 | |
| 		    ioc_status, mpi_reply->IOCLogInfo);
 | |
| 		rc = -EFAULT;
 | |
| 	}
 | |
| 
 | |
|  out:
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_release - request to send Diag Release Message to firmware
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  * @state - NON_BLOCKING or BLOCKING
 | |
|  *
 | |
|  * This allows ownership of the specified buffer to returned to the driver,
 | |
|  * allowing an application to read the buffer without fear that firmware is
 | |
|  * overwritting information in the buffer.
 | |
|  */
 | |
| static long
 | |
| _ctl_diag_release(void __user *arg, enum block_state state)
 | |
| {
 | |
| 	struct mpt2_diag_release karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	void *request_data;
 | |
| 	int rc;
 | |
| 	u8 buffer_type;
 | |
| 	u8 issue_reset = 0;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	buffer_type = karg.unique_id & 0x000000ff;
 | |
| 	if (!_ctl_diag_capability(ioc, buffer_type)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, karg.unique_id);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_RELEASED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
 | |
| 		    "is already released\n", ioc->name, __func__,
 | |
| 		    buffer_type);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	request_data = ioc->diag_buffer[buffer_type];
 | |
| 
 | |
| 	if (!request_data) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/* buffers were released by due to host reset */
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
 | |
| 		ioc->diag_buffer_status[buffer_type] |=
 | |
| 		    MPT2_DIAG_BUFFER_IS_RELEASED;
 | |
| 		ioc->diag_buffer_status[buffer_type] &=
 | |
| 		    ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
 | |
| 		    "was released due to host reset\n", ioc->name, __func__,
 | |
| 		    buffer_type);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
 | |
| 		return -EAGAIN;
 | |
| 	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
 | |
| 
 | |
| 	if (issue_reset)
 | |
| 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 | |
| 		    FORCE_BIG_HAMMER);
 | |
| 
 | |
| 	mutex_unlock(&ioc->ctl_cmds.mutex);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_diag_read_buffer - request for copy of the diag buffer
 | |
|  * @arg - user space buffer containing ioctl content
 | |
|  * @state - NON_BLOCKING or BLOCKING
 | |
|  */
 | |
| static long
 | |
| _ctl_diag_read_buffer(void __user *arg, enum block_state state)
 | |
| {
 | |
| 	struct mpt2_diag_read_buffer karg;
 | |
| 	struct mpt2_diag_read_buffer __user *uarg = arg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	void *request_data, *diag_data;
 | |
| 	Mpi2DiagBufferPostRequest_t *mpi_request;
 | |
| 	Mpi2DiagBufferPostReply_t *mpi_reply;
 | |
| 	int rc, i;
 | |
| 	u8 buffer_type;
 | |
| 	unsigned long timeleft;
 | |
| 	u16 smid;
 | |
| 	u16 ioc_status;
 | |
| 	u8 issue_reset = 0;
 | |
| 
 | |
| 	if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 | |
| 	    __func__));
 | |
| 
 | |
| 	buffer_type = karg.unique_id & 0x000000ff;
 | |
| 	if (!_ctl_diag_capability(ioc, buffer_type)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -EPERM;
 | |
| 	}
 | |
| 
 | |
| 	if (karg.unique_id != ioc->unique_id[buffer_type]) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
 | |
| 		    "registered\n", ioc->name, __func__, karg.unique_id);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	request_data = ioc->diag_buffer[buffer_type];
 | |
| 	if (!request_data) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: doesn't have buffer for "
 | |
| 		    "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
 | |
| 		    "or bytes_to_read are not 4 byte aligned\n", ioc->name,
 | |
| 		    __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	diag_data = (void *)(request_data + karg.starting_offset);
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), "
 | |
| 	    "offset(%d), sz(%d)\n", ioc->name, __func__,
 | |
| 	    diag_data, karg.starting_offset, karg.bytes_to_read));
 | |
| 
 | |
| 	if (copy_to_user((void __user *)uarg->diagnostic_data,
 | |
| 	    diag_data, karg.bytes_to_read)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: Unable to write "
 | |
| 		    "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
 | |
| 		    __func__, diag_data);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 
 | |
| 	if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
 | |
| 		return 0;
 | |
| 
 | |
| 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: Reregister "
 | |
| 		"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
 | |
| 	if ((ioc->diag_buffer_status[buffer_type] &
 | |
| 	    MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
 | |
| 		    "buffer_type(0x%02x) is still registered\n", ioc->name,
 | |
| 		     __func__, buffer_type));
 | |
| 		return 0;
 | |
| 	}
 | |
| 	/* Get a free request frame and save the message context.
 | |
| 	*/
 | |
| 	if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
 | |
| 		return -EAGAIN;
 | |
| 	else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
 | |
| 	if (!smid) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EAGAIN;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	rc = 0;
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_PENDING;
 | |
| 	memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 | |
| 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 | |
| 	ioc->ctl_cmds.smid = smid;
 | |
| 
 | |
| 	mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
 | |
| 	mpi_request->BufferType = buffer_type;
 | |
| 	mpi_request->BufferLength =
 | |
| 	    cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
 | |
| 	mpi_request->BufferAddress =
 | |
| 	    cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
 | |
| 	for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
 | |
| 		mpi_request->ProductSpecific[i] =
 | |
| 			cpu_to_le32(ioc->product_specific[buffer_type][i]);
 | |
| 	mpi_request->VF_ID = 0; /* TODO */
 | |
| 	mpi_request->VP_ID = 0;
 | |
| 
 | |
| 	mpt2sas_base_put_smid_default(ioc, smid);
 | |
| 	init_completion(&ioc->ctl_cmds.done);
 | |
| 	timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
 | |
| 	    MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
 | |
| 
 | |
| 	if (!(ioc->ctl_cmds.status & MPT2_CMD_COMPLETE)) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name,
 | |
| 		    __func__);
 | |
| 		_debug_dump_mf(mpi_request,
 | |
| 		    sizeof(Mpi2DiagBufferPostRequest_t)/4);
 | |
| 		if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
 | |
| 			issue_reset = 1;
 | |
| 		goto issue_host_reset;
 | |
| 	}
 | |
| 
 | |
| 	/* process the completed Reply Message Frame */
 | |
| 	if ((ioc->ctl_cmds.status & MPT2_CMD_REPLY_VALID) == 0) {
 | |
| 		printk(MPT2SAS_ERR_FMT "%s: no reply message\n",
 | |
| 		    ioc->name, __func__);
 | |
| 		rc = -EFAULT;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	mpi_reply = ioc->ctl_cmds.reply;
 | |
| 	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
 | |
| 
 | |
| 	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
 | |
| 		ioc->diag_buffer_status[buffer_type] |=
 | |
| 		    MPT2_DIAG_BUFFER_IS_REGISTERED;
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
 | |
| 		    ioc->name, __func__));
 | |
| 	} else {
 | |
| 		printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
 | |
| 		    "log_info(0x%08x)\n", ioc->name, __func__,
 | |
| 		    ioc_status, mpi_reply->IOCLogInfo);
 | |
| 		rc = -EFAULT;
 | |
| 	}
 | |
| 
 | |
|  issue_host_reset:
 | |
| 	if (issue_reset)
 | |
| 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 | |
| 		    FORCE_BIG_HAMMER);
 | |
| 
 | |
|  out:
 | |
| 
 | |
| 	ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
 | |
| 	mutex_unlock(&ioc->ctl_cmds.mutex);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_ioctl_main - main ioctl entry point
 | |
|  * @file - (struct file)
 | |
|  * @cmd - ioctl opcode
 | |
|  * @arg -
 | |
|  */
 | |
| static long
 | |
| _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg)
 | |
| {
 | |
| 	enum block_state state;
 | |
| 	long ret = -EINVAL;
 | |
| 
 | |
| 	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING :
 | |
| 	    BLOCKING;
 | |
| 
 | |
| 	switch (cmd) {
 | |
| 	case MPT2IOCINFO:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_iocinfo))
 | |
| 			ret = _ctl_getiocinfo(arg);
 | |
| 		break;
 | |
| 	case MPT2COMMAND:
 | |
| 	{
 | |
| 		struct mpt2_ioctl_command karg;
 | |
| 		struct mpt2_ioctl_command __user *uarg;
 | |
| 		struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 		if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 			    __FILE__, __LINE__, __func__);
 | |
| 			return -EFAULT;
 | |
| 		}
 | |
| 
 | |
| 		if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
 | |
| 		    !ioc)
 | |
| 			return -ENODEV;
 | |
| 
 | |
| 		if (ioc->shost_recovery)
 | |
| 			return -EAGAIN;
 | |
| 
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
 | |
| 			uarg = arg;
 | |
| 			ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
 | |
| 		}
 | |
| 		break;
 | |
| 	}
 | |
| 	case MPT2EVENTQUERY:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventquery))
 | |
| 			ret = _ctl_eventquery(arg);
 | |
| 		break;
 | |
| 	case MPT2EVENTENABLE:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_eventenable))
 | |
| 			ret = _ctl_eventenable(arg);
 | |
| 		break;
 | |
| 	case MPT2EVENTREPORT:
 | |
| 		ret = _ctl_eventreport(arg);
 | |
| 		break;
 | |
| 	case MPT2HARDRESET:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_diag_reset))
 | |
| 			ret = _ctl_do_reset(arg);
 | |
| 		break;
 | |
| 	case MPT2BTDHMAPPING:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_btdh_mapping))
 | |
| 			ret = _ctl_btdh_mapping(arg);
 | |
| 		break;
 | |
| 	case MPT2DIAGREGISTER:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_register))
 | |
| 			ret = _ctl_diag_register(arg, state);
 | |
| 		break;
 | |
| 	case MPT2DIAGUNREGISTER:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_unregister))
 | |
| 			ret = _ctl_diag_unregister(arg);
 | |
| 		break;
 | |
| 	case MPT2DIAGQUERY:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_query))
 | |
| 			ret = _ctl_diag_query(arg);
 | |
| 		break;
 | |
| 	case MPT2DIAGRELEASE:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_release))
 | |
| 			ret = _ctl_diag_release(arg, state);
 | |
| 		break;
 | |
| 	case MPT2DIAGREADBUFFER:
 | |
| 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_diag_read_buffer))
 | |
| 			ret = _ctl_diag_read_buffer(arg, state);
 | |
| 		break;
 | |
| 	default:
 | |
| 	{
 | |
| 		struct mpt2_ioctl_command karg;
 | |
| 		struct MPT2SAS_ADAPTER *ioc;
 | |
| 
 | |
| 		if (copy_from_user(&karg, arg, sizeof(karg))) {
 | |
| 			printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 			    __FILE__, __LINE__, __func__);
 | |
| 			return -EFAULT;
 | |
| 		}
 | |
| 
 | |
| 		if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 ||
 | |
| 		    !ioc)
 | |
| 			return -ENODEV;
 | |
| 
 | |
| 		dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT
 | |
| 		    "unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
 | |
| 		break;
 | |
| 	}
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_ioctl - main ioctl entry point (unlocked)
 | |
|  * @file - (struct file)
 | |
|  * @cmd - ioctl opcode
 | |
|  * @arg -
 | |
|  */
 | |
| static long
 | |
| _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	long ret;
 | |
| 
 | |
| 	lock_kernel();
 | |
| 	ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
 | |
| 	unlock_kernel();
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_COMPAT
 | |
| /**
 | |
|  * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
 | |
|  * @file - (struct file)
 | |
|  * @cmd - ioctl opcode
 | |
|  * @arg - (struct mpt2_ioctl_command32)
 | |
|  *
 | |
|  * MPT2COMMAND32 - Handle 32bit applications running on 64bit os.
 | |
|  */
 | |
| static long
 | |
| _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
 | |
| {
 | |
| 	struct mpt2_ioctl_command32 karg32;
 | |
| 	struct mpt2_ioctl_command32 __user *uarg;
 | |
| 	struct mpt2_ioctl_command karg;
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	enum block_state state;
 | |
| 
 | |
| 	if (_IOC_SIZE(cmd) != sizeof(struct mpt2_ioctl_command32))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	uarg = (struct mpt2_ioctl_command32 __user *) arg;
 | |
| 
 | |
| 	if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
 | |
| 		printk(KERN_ERR "failure at %s:%d/%s()!\n",
 | |
| 		    __FILE__, __LINE__, __func__);
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 	if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (ioc->shost_recovery)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
 | |
| 	karg.hdr.ioc_number = karg32.hdr.ioc_number;
 | |
| 	karg.hdr.port_number = karg32.hdr.port_number;
 | |
| 	karg.hdr.max_data_size = karg32.hdr.max_data_size;
 | |
| 	karg.timeout = karg32.timeout;
 | |
| 	karg.max_reply_bytes = karg32.max_reply_bytes;
 | |
| 	karg.data_in_size = karg32.data_in_size;
 | |
| 	karg.data_out_size = karg32.data_out_size;
 | |
| 	karg.max_sense_bytes = karg32.max_sense_bytes;
 | |
| 	karg.data_sge_offset = karg32.data_sge_offset;
 | |
| 	memcpy(&karg.reply_frame_buf_ptr, &karg32.reply_frame_buf_ptr,
 | |
| 	    sizeof(uint32_t));
 | |
| 	memcpy(&karg.data_in_buf_ptr, &karg32.data_in_buf_ptr,
 | |
| 	    sizeof(uint32_t));
 | |
| 	memcpy(&karg.data_out_buf_ptr, &karg32.data_out_buf_ptr,
 | |
| 	    sizeof(uint32_t));
 | |
| 	memcpy(&karg.sense_data_ptr, &karg32.sense_data_ptr,
 | |
| 	    sizeof(uint32_t));
 | |
| 	state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
 | |
| 	return _ctl_do_mpt_command(ioc, karg, &uarg->mf, state);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * _ctl_ioctl_compat - main ioctl entry point (compat)
 | |
|  * @file -
 | |
|  * @cmd -
 | |
|  * @arg -
 | |
|  *
 | |
|  * This routine handles 32 bit applications in 64bit os.
 | |
|  */
 | |
| static long
 | |
| _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
 | |
| {
 | |
| 	long ret;
 | |
| 
 | |
| 	lock_kernel();
 | |
| 	if (cmd == MPT2COMMAND32)
 | |
| 		ret = _ctl_compat_mpt_command(file, cmd, arg);
 | |
| 	else
 | |
| 		ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
 | |
| 	unlock_kernel();
 | |
| 	return ret;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /* scsi host attributes */
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_fw_show - firmware version
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_fw_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
 | |
| 	    (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
 | |
| 	    (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
 | |
| 	    (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
 | |
| 	    ioc->facts.FWVersion.Word & 0x000000FF);
 | |
| }
 | |
| static DEVICE_ATTR(version_fw, S_IRUGO, _ctl_version_fw_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_bios_show - bios version
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_bios_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
 | |
| 	    (version & 0xFF000000) >> 24,
 | |
| 	    (version & 0x00FF0000) >> 16,
 | |
| 	    (version & 0x0000FF00) >> 8,
 | |
| 	    version & 0x000000FF);
 | |
| }
 | |
| static DEVICE_ATTR(version_bios, S_IRUGO, _ctl_version_bios_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_mpi_show - MPI (message passing interface) version
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_mpi_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
 | |
| 	    ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
 | |
| }
 | |
| static DEVICE_ATTR(version_mpi, S_IRUGO, _ctl_version_mpi_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_product_show - product name
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_product_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
 | |
| }
 | |
| static DEVICE_ATTR(version_product, S_IRUGO,
 | |
|    _ctl_version_product_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_nvdata_persistent_show - ndvata persistent version
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_nvdata_persistent_show(struct device *cdev,
 | |
|     struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02xh\n",
 | |
| 	    le16_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
 | |
| }
 | |
| static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
 | |
|     _ctl_version_nvdata_persistent_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_version_nvdata_default_show - nvdata default version
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_version_nvdata_default_show(struct device *cdev,
 | |
|     struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02xh\n",
 | |
| 	    le16_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
 | |
| }
 | |
| static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
 | |
|     _ctl_version_nvdata_default_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_board_name_show - board name
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_board_name_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
 | |
| }
 | |
| static DEVICE_ATTR(board_name, S_IRUGO, _ctl_board_name_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_board_assembly_show - board assembly name
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_board_assembly_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
 | |
| }
 | |
| static DEVICE_ATTR(board_assembly, S_IRUGO,
 | |
|     _ctl_board_assembly_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_board_tracer_show - board tracer number
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_board_tracer_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
 | |
| }
 | |
| static DEVICE_ATTR(board_tracer, S_IRUGO,
 | |
|     _ctl_board_tracer_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_io_delay_show - io missing delay
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is for firmware implemention for deboucing device
 | |
|  * removal events.
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_io_delay_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
 | |
| }
 | |
| static DEVICE_ATTR(io_delay, S_IRUGO,
 | |
|     _ctl_io_delay_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_device_delay_show - device missing delay
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is for firmware implemention for deboucing device
 | |
|  * removal events.
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_device_delay_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
 | |
| }
 | |
| static DEVICE_ATTR(device_delay, S_IRUGO,
 | |
|     _ctl_device_delay_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_fw_queue_depth_show - global credits
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is firmware queue depth limit
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
 | |
| }
 | |
| static DEVICE_ATTR(fw_queue_depth, S_IRUGO,
 | |
|     _ctl_fw_queue_depth_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_sas_address_show - sas address
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is the controller sas address
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_host_sas_address_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
 | |
| 	    (unsigned long long)ioc->sas_hba.sas_address);
 | |
| }
 | |
| static DEVICE_ATTR(host_sas_address, S_IRUGO,
 | |
|     _ctl_host_sas_address_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_logging_level_show - logging level
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * A sysfs 'read/write' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_logging_level_show(struct device *cdev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
 | |
| }
 | |
| static ssize_t
 | |
| _ctl_logging_level_store(struct device *cdev, struct device_attribute *attr,
 | |
|     const char *buf, size_t count)
 | |
| {
 | |
| 	struct Scsi_Host *shost = class_to_shost(cdev);
 | |
| 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 | |
| 	int val = 0;
 | |
| 
 | |
| 	if (sscanf(buf, "%x", &val) != 1)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ioc->logging_level = val;
 | |
| 	printk(MPT2SAS_INFO_FMT "logging_level=%08xh\n", ioc->name,
 | |
| 	    ioc->logging_level);
 | |
| 	return strlen(buf);
 | |
| }
 | |
| static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
 | |
|     _ctl_logging_level_show, _ctl_logging_level_store);
 | |
| 
 | |
| struct device_attribute *mpt2sas_host_attrs[] = {
 | |
| 	&dev_attr_version_fw,
 | |
| 	&dev_attr_version_bios,
 | |
| 	&dev_attr_version_mpi,
 | |
| 	&dev_attr_version_product,
 | |
| 	&dev_attr_version_nvdata_persistent,
 | |
| 	&dev_attr_version_nvdata_default,
 | |
| 	&dev_attr_board_name,
 | |
| 	&dev_attr_board_assembly,
 | |
| 	&dev_attr_board_tracer,
 | |
| 	&dev_attr_io_delay,
 | |
| 	&dev_attr_device_delay,
 | |
| 	&dev_attr_logging_level,
 | |
| 	&dev_attr_fw_queue_depth,
 | |
| 	&dev_attr_host_sas_address,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| /* device attributes */
 | |
| 
 | |
| /**
 | |
|  * _ctl_device_sas_address_show - sas address
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is the sas address for the target
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_device_sas_address_show(struct device *dev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct scsi_device *sdev = to_scsi_device(dev);
 | |
| 	struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
 | |
| 	    (unsigned long long)sas_device_priv_data->sas_target->sas_address);
 | |
| }
 | |
| static DEVICE_ATTR(sas_address, S_IRUGO, _ctl_device_sas_address_show, NULL);
 | |
| 
 | |
| /**
 | |
|  * _ctl_device_handle_show - device handle
 | |
|  * @cdev - pointer to embedded class device
 | |
|  * @buf - the buffer returned
 | |
|  *
 | |
|  * This is the firmware assigned device handle
 | |
|  *
 | |
|  * A sysfs 'read-only' shost attribute.
 | |
|  */
 | |
| static ssize_t
 | |
| _ctl_device_handle_show(struct device *dev, struct device_attribute *attr,
 | |
|     char *buf)
 | |
| {
 | |
| 	struct scsi_device *sdev = to_scsi_device(dev);
 | |
| 	struct MPT2SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
 | |
| 
 | |
| 	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
 | |
| 	    sas_device_priv_data->sas_target->handle);
 | |
| }
 | |
| static DEVICE_ATTR(sas_device_handle, S_IRUGO, _ctl_device_handle_show, NULL);
 | |
| 
 | |
| struct device_attribute *mpt2sas_dev_attrs[] = {
 | |
| 	&dev_attr_sas_address,
 | |
| 	&dev_attr_sas_device_handle,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct file_operations ctl_fops = {
 | |
| 	.owner = THIS_MODULE,
 | |
| 	.unlocked_ioctl = _ctl_ioctl,
 | |
| 	.release = _ctl_release,
 | |
| 	.poll = _ctl_poll,
 | |
| 	.fasync = _ctl_fasync,
 | |
| #ifdef CONFIG_COMPAT
 | |
| 	.compat_ioctl = _ctl_ioctl_compat,
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static struct miscdevice ctl_dev = {
 | |
| 	.minor  = MPT2SAS_MINOR,
 | |
| 	.name   = MPT2SAS_DEV_NAME,
 | |
| 	.fops   = &ctl_fops,
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_init - main entry point for ctl.
 | |
|  *
 | |
|  */
 | |
| void
 | |
| mpt2sas_ctl_init(void)
 | |
| {
 | |
| 	async_queue = NULL;
 | |
| 	if (misc_register(&ctl_dev) < 0)
 | |
| 		printk(KERN_ERR "%s can't register misc device [minor=%d]\n",
 | |
| 		    MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
 | |
| 
 | |
| 	init_waitqueue_head(&ctl_poll_wait);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * mpt2sas_ctl_exit - exit point for ctl
 | |
|  *
 | |
|  */
 | |
| void
 | |
| mpt2sas_ctl_exit(void)
 | |
| {
 | |
| 	struct MPT2SAS_ADAPTER *ioc;
 | |
| 	int i;
 | |
| 
 | |
| 	list_for_each_entry(ioc, &mpt2sas_ioc_list, list) {
 | |
| 
 | |
| 		/* free memory associated to diag buffers */
 | |
| 		for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
 | |
| 			if (!ioc->diag_buffer[i])
 | |
| 				continue;
 | |
| 			pci_free_consistent(ioc->pdev, ioc->diag_buffer_sz[i],
 | |
| 			    ioc->diag_buffer[i], ioc->diag_buffer_dma[i]);
 | |
| 			ioc->diag_buffer[i] = NULL;
 | |
| 			ioc->diag_buffer_status[i] = 0;
 | |
| 		}
 | |
| 
 | |
| 		kfree(ioc->event_log);
 | |
| 	}
 | |
| 	misc_deregister(&ctl_dev);
 | |
| }
 | |
| 
 |