369 lines
9.6 KiB
C
369 lines
9.6 KiB
C
/*
|
|
* arch/arm/mach-orion5x/db88f5281-setup.c
|
|
*
|
|
* Marvell Orion-2 Development Board Setup
|
|
*
|
|
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mv643xx_eth.h>
|
|
#include <linux/i2c.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/pci.h>
|
|
#include <mach/orion5x.h>
|
|
#include <plat/orion_nand.h>
|
|
#include "common.h"
|
|
#include "mpp.h"
|
|
|
|
/*****************************************************************************
|
|
* DB-88F5281 on board devices
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* 512K NOR flash Device bus boot chip select
|
|
*/
|
|
|
|
#define DB88F5281_NOR_BOOT_BASE 0xf4000000
|
|
#define DB88F5281_NOR_BOOT_SIZE SZ_512K
|
|
|
|
/*
|
|
* 7-Segment on Device bus chip select 0
|
|
*/
|
|
|
|
#define DB88F5281_7SEG_BASE 0xfa000000
|
|
#define DB88F5281_7SEG_SIZE SZ_1K
|
|
|
|
/*
|
|
* 32M NOR flash on Device bus chip select 1
|
|
*/
|
|
|
|
#define DB88F5281_NOR_BASE 0xfc000000
|
|
#define DB88F5281_NOR_SIZE SZ_32M
|
|
|
|
/*
|
|
* 32M NAND flash on Device bus chip select 2
|
|
*/
|
|
|
|
#define DB88F5281_NAND_BASE 0xfa800000
|
|
#define DB88F5281_NAND_SIZE SZ_1K
|
|
|
|
/*
|
|
* PCI
|
|
*/
|
|
|
|
#define DB88F5281_PCI_SLOT0_OFFS 7
|
|
#define DB88F5281_PCI_SLOT0_IRQ_PIN 12
|
|
#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN 13
|
|
|
|
/*****************************************************************************
|
|
* 512M NOR Flash on Device bus Boot CS
|
|
****************************************************************************/
|
|
|
|
static struct physmap_flash_data db88f5281_boot_flash_data = {
|
|
.width = 1, /* 8 bit bus width */
|
|
};
|
|
|
|
static struct resource db88f5281_boot_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = DB88F5281_NOR_BOOT_BASE,
|
|
.end = DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device db88f5281_boot_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &db88f5281_boot_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &db88f5281_boot_flash_resource,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* 32M NOR Flash on Device bus CS1
|
|
****************************************************************************/
|
|
|
|
static struct physmap_flash_data db88f5281_nor_flash_data = {
|
|
.width = 4, /* 32 bit bus width */
|
|
};
|
|
|
|
static struct resource db88f5281_nor_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = DB88F5281_NOR_BASE,
|
|
.end = DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
|
|
};
|
|
|
|
static struct platform_device db88f5281_nor_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &db88f5281_nor_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &db88f5281_nor_flash_resource,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* 32M NAND Flash on Device bus CS2
|
|
****************************************************************************/
|
|
|
|
static struct mtd_partition db88f5281_nand_parts[] = {
|
|
{
|
|
.name = "kernel",
|
|
.offset = 0,
|
|
.size = SZ_2M,
|
|
}, {
|
|
.name = "root",
|
|
.offset = SZ_2M,
|
|
.size = (SZ_16M - SZ_2M),
|
|
}, {
|
|
.name = "user",
|
|
.offset = SZ_16M,
|
|
.size = SZ_8M,
|
|
}, {
|
|
.name = "recovery",
|
|
.offset = (SZ_16M + SZ_8M),
|
|
.size = SZ_8M,
|
|
},
|
|
};
|
|
|
|
static struct resource db88f5281_nand_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
.start = DB88F5281_NAND_BASE,
|
|
.end = DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
|
|
};
|
|
|
|
static struct orion_nand_data db88f5281_nand_data = {
|
|
.parts = db88f5281_nand_parts,
|
|
.nr_parts = ARRAY_SIZE(db88f5281_nand_parts),
|
|
.cle = 0,
|
|
.ale = 1,
|
|
.width = 8,
|
|
};
|
|
|
|
static struct platform_device db88f5281_nand_flash = {
|
|
.name = "orion_nand",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &db88f5281_nand_data,
|
|
},
|
|
.resource = &db88f5281_nand_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* 7-Segment on Device bus CS0
|
|
* Dummy counter every 2 sec
|
|
****************************************************************************/
|
|
|
|
static void __iomem *db88f5281_7seg;
|
|
static struct timer_list db88f5281_timer;
|
|
|
|
static void db88f5281_7seg_event(unsigned long data)
|
|
{
|
|
static int count = 0;
|
|
writel(0, db88f5281_7seg + (count << 4));
|
|
count = (count + 1) & 7;
|
|
mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
|
|
}
|
|
|
|
static int __init db88f5281_7seg_init(void)
|
|
{
|
|
if (machine_is_db88f5281()) {
|
|
db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
|
|
DB88F5281_7SEG_SIZE);
|
|
if (!db88f5281_7seg) {
|
|
printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
|
|
return -EIO;
|
|
}
|
|
setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
|
|
mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
__initcall(db88f5281_7seg_init);
|
|
|
|
/*****************************************************************************
|
|
* PCI
|
|
****************************************************************************/
|
|
|
|
void __init db88f5281_pci_preinit(void)
|
|
{
|
|
int pin;
|
|
|
|
/*
|
|
* Configure PCI GPIO IRQ pins
|
|
*/
|
|
pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
|
|
if (gpio_request(pin, "PCI Int1") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "db88f5281_pci_preinit faield to "
|
|
"set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
|
|
}
|
|
|
|
pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
|
|
if (gpio_request(pin, "PCI Int2") == 0) {
|
|
if (gpio_direction_input(pin) == 0) {
|
|
set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
|
|
} else {
|
|
printk(KERN_ERR "db88f5281_pci_preinit faield "
|
|
"to set_irq_type pin %d\n", pin);
|
|
gpio_free(pin);
|
|
}
|
|
} else {
|
|
printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
|
|
}
|
|
}
|
|
|
|
static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
/*
|
|
* Check for devices with hard-wired IRQs.
|
|
*/
|
|
irq = orion5x_pci_map_irq(dev, slot, pin);
|
|
if (irq != -1)
|
|
return irq;
|
|
|
|
/*
|
|
* PCI IRQs are connected via GPIOs.
|
|
*/
|
|
switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
|
|
case 0:
|
|
return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
|
|
case 1:
|
|
case 2:
|
|
return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static struct hw_pci db88f5281_pci __initdata = {
|
|
.nr_controllers = 2,
|
|
.preinit = db88f5281_pci_preinit,
|
|
.swizzle = pci_std_swizzle,
|
|
.setup = orion5x_pci_sys_setup,
|
|
.scan = orion5x_pci_sys_scan_bus,
|
|
.map_irq = db88f5281_pci_map_irq,
|
|
};
|
|
|
|
static int __init db88f5281_pci_init(void)
|
|
{
|
|
if (machine_is_db88f5281())
|
|
pci_common_init(&db88f5281_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(db88f5281_pci_init);
|
|
|
|
/*****************************************************************************
|
|
* Ethernet
|
|
****************************************************************************/
|
|
static struct mv643xx_eth_platform_data db88f5281_eth_data = {
|
|
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* RTC DS1339 on I2C bus
|
|
****************************************************************************/
|
|
static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
|
|
I2C_BOARD_INFO("ds1339", 0x68),
|
|
};
|
|
|
|
/*****************************************************************************
|
|
* General Setup
|
|
****************************************************************************/
|
|
static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
|
|
{ 0, MPP_GPIO }, /* USB Over Current */
|
|
{ 1, MPP_GPIO }, /* USB Vbat input */
|
|
{ 2, MPP_PCI_ARB }, /* PCI_REQn[2] */
|
|
{ 3, MPP_PCI_ARB }, /* PCI_GNTn[2] */
|
|
{ 4, MPP_PCI_ARB }, /* PCI_REQn[3] */
|
|
{ 5, MPP_PCI_ARB }, /* PCI_GNTn[3] */
|
|
{ 6, MPP_GPIO }, /* JP0, CON17.2 */
|
|
{ 7, MPP_GPIO }, /* JP1, CON17.1 */
|
|
{ 8, MPP_GPIO }, /* JP2, CON11.2 */
|
|
{ 9, MPP_GPIO }, /* JP3, CON11.3 */
|
|
{ 10, MPP_GPIO }, /* RTC int */
|
|
{ 11, MPP_GPIO }, /* Baud Rate Generator */
|
|
{ 12, MPP_GPIO }, /* PCI int 1 */
|
|
{ 13, MPP_GPIO }, /* PCI int 2 */
|
|
{ 14, MPP_NAND }, /* NAND_REn[2] */
|
|
{ 15, MPP_NAND }, /* NAND_WEn[2] */
|
|
{ 16, MPP_UART }, /* UART1_RX */
|
|
{ 17, MPP_UART }, /* UART1_TX */
|
|
{ 18, MPP_UART }, /* UART1_CTSn */
|
|
{ 19, MPP_UART }, /* UART1_RTSn */
|
|
{ -1 },
|
|
};
|
|
|
|
static void __init db88f5281_init(void)
|
|
{
|
|
/*
|
|
* Basic Orion setup. Need to be called early.
|
|
*/
|
|
orion5x_init();
|
|
|
|
orion5x_mpp_conf(db88f5281_mpp_modes);
|
|
writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */
|
|
|
|
/*
|
|
* Configure peripherals.
|
|
*/
|
|
orion5x_ehci0_init();
|
|
orion5x_eth_init(&db88f5281_eth_data);
|
|
orion5x_i2c_init();
|
|
orion5x_uart0_init();
|
|
orion5x_uart1_init();
|
|
|
|
orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
|
|
DB88F5281_NOR_BOOT_SIZE);
|
|
platform_device_register(&db88f5281_boot_flash);
|
|
|
|
orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
|
|
|
|
orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
|
|
platform_device_register(&db88f5281_nor_flash);
|
|
|
|
orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
|
|
platform_device_register(&db88f5281_nand_flash);
|
|
|
|
i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
|
|
}
|
|
|
|
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
|
|
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
|
|
.phys_io = ORION5X_REGS_PHYS_BASE,
|
|
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
|
.boot_params = 0x00000100,
|
|
.init_machine = db88f5281_init,
|
|
.map_io = orion5x_map_io,
|
|
.init_irq = orion5x_init_irq,
|
|
.timer = &orion5x_timer,
|
|
MACHINE_END
|