192 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			192 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Bitbanged MDIO support.
 | 
						|
 *
 | 
						|
 * Author: Scott Wood <scottwood@freescale.com>
 | 
						|
 * Copyright (c) 2007 Freescale Semiconductor
 | 
						|
 *
 | 
						|
 * Based on CPM2 MDIO code which is:
 | 
						|
 *
 | 
						|
 * Copyright (c) 2003 Intracom S.A.
 | 
						|
 *  by Pantelis Antoniou <panto@intracom.gr>
 | 
						|
 *
 | 
						|
 * 2005 (c) MontaVista Software, Inc.
 | 
						|
 * Vitaly Bordug <vbordug@ru.mvista.com>
 | 
						|
 *
 | 
						|
 * This file is licensed under the terms of the GNU General Public License
 | 
						|
 * version 2. This program is licensed "as is" without any warranty of any
 | 
						|
 * kind, whether express or implied.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/mdio-bitbang.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/types.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
 | 
						|
#define MDIO_READ 1
 | 
						|
#define MDIO_WRITE 0
 | 
						|
 | 
						|
#define MDIO_SETUP_TIME 10
 | 
						|
#define MDIO_HOLD_TIME 10
 | 
						|
 | 
						|
/* Minimum MDC period is 400 ns, plus some margin for error.  MDIO_DELAY
 | 
						|
 * is done twice per period.
 | 
						|
 */
 | 
						|
#define MDIO_DELAY 250
 | 
						|
 | 
						|
/* The PHY may take up to 300 ns to produce data, plus some margin
 | 
						|
 * for error.
 | 
						|
 */
 | 
						|
#define MDIO_READ_DELAY 350
 | 
						|
 | 
						|
/* MDIO must already be configured as output. */
 | 
						|
static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
 | 
						|
{
 | 
						|
	const struct mdiobb_ops *ops = ctrl->ops;
 | 
						|
 | 
						|
	ops->set_mdio_data(ctrl, val);
 | 
						|
	ndelay(MDIO_DELAY);
 | 
						|
	ops->set_mdc(ctrl, 1);
 | 
						|
	ndelay(MDIO_DELAY);
 | 
						|
	ops->set_mdc(ctrl, 0);
 | 
						|
}
 | 
						|
 | 
						|
/* MDIO must already be configured as input. */
 | 
						|
static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
 | 
						|
{
 | 
						|
	const struct mdiobb_ops *ops = ctrl->ops;
 | 
						|
 | 
						|
	ndelay(MDIO_DELAY);
 | 
						|
	ops->set_mdc(ctrl, 1);
 | 
						|
	ndelay(MDIO_READ_DELAY);
 | 
						|
	ops->set_mdc(ctrl, 0);
 | 
						|
 | 
						|
	return ops->get_mdio_data(ctrl);
 | 
						|
}
 | 
						|
 | 
						|
/* MDIO must already be configured as output. */
 | 
						|
static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = bits - 1; i >= 0; i--)
 | 
						|
		mdiobb_send_bit(ctrl, (val >> i) & 1);
 | 
						|
}
 | 
						|
 | 
						|
/* MDIO must already be configured as input. */
 | 
						|
static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	u16 ret = 0;
 | 
						|
 | 
						|
	for (i = bits - 1; i >= 0; i--) {
 | 
						|
		ret <<= 1;
 | 
						|
		ret |= mdiobb_get_bit(ctrl);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* Utility to send the preamble, address, and
 | 
						|
 * register (common to read and write).
 | 
						|
 */
 | 
						|
static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
 | 
						|
{
 | 
						|
	const struct mdiobb_ops *ops = ctrl->ops;
 | 
						|
	int i;
 | 
						|
 | 
						|
	ops->set_mdio_dir(ctrl, 1);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good
 | 
						|
	 * measure.  The IEEE spec says this is a PHY optional
 | 
						|
	 * requirement.  The AMD 79C874 requires one after power up and
 | 
						|
	 * one after a MII communications error.  This means that we are
 | 
						|
	 * doing more preambles than we need, but it is safer and will be
 | 
						|
	 * much more robust.
 | 
						|
	 */
 | 
						|
 | 
						|
	for (i = 0; i < 32; i++)
 | 
						|
		mdiobb_send_bit(ctrl, 1);
 | 
						|
 | 
						|
	/* send the start bit (01) and the read opcode (10) or write (10) */
 | 
						|
	mdiobb_send_bit(ctrl, 0);
 | 
						|
	mdiobb_send_bit(ctrl, 1);
 | 
						|
	mdiobb_send_bit(ctrl, read);
 | 
						|
	mdiobb_send_bit(ctrl, !read);
 | 
						|
 | 
						|
	mdiobb_send_num(ctrl, phy, 5);
 | 
						|
	mdiobb_send_num(ctrl, reg, 5);
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
 | 
						|
{
 | 
						|
	struct mdiobb_ctrl *ctrl = bus->priv;
 | 
						|
	int ret, i;
 | 
						|
 | 
						|
	mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
 | 
						|
	ctrl->ops->set_mdio_dir(ctrl, 0);
 | 
						|
 | 
						|
	/* check the turnaround bit: the PHY should be driving it to zero */
 | 
						|
	if (mdiobb_get_bit(ctrl) != 0) {
 | 
						|
		/* PHY didn't drive TA low -- flush any bits it
 | 
						|
		 * may be trying to send.
 | 
						|
		 */
 | 
						|
		for (i = 0; i < 32; i++)
 | 
						|
			mdiobb_get_bit(ctrl);
 | 
						|
 | 
						|
		return 0xffff;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = mdiobb_get_num(ctrl, 16);
 | 
						|
	mdiobb_get_bit(ctrl);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
 | 
						|
{
 | 
						|
	struct mdiobb_ctrl *ctrl = bus->priv;
 | 
						|
 | 
						|
	mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
 | 
						|
 | 
						|
	/* send the turnaround (10) */
 | 
						|
	mdiobb_send_bit(ctrl, 1);
 | 
						|
	mdiobb_send_bit(ctrl, 0);
 | 
						|
 | 
						|
	mdiobb_send_num(ctrl, val, 16);
 | 
						|
 | 
						|
	ctrl->ops->set_mdio_dir(ctrl, 0);
 | 
						|
	mdiobb_get_bit(ctrl);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
 | 
						|
{
 | 
						|
	struct mii_bus *bus;
 | 
						|
 | 
						|
	bus = mdiobus_alloc();
 | 
						|
	if (!bus)
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	__module_get(ctrl->ops->owner);
 | 
						|
 | 
						|
	bus->read = mdiobb_read;
 | 
						|
	bus->write = mdiobb_write;
 | 
						|
	bus->priv = ctrl;
 | 
						|
 | 
						|
	return bus;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(alloc_mdio_bitbang);
 | 
						|
 | 
						|
void free_mdio_bitbang(struct mii_bus *bus)
 | 
						|
{
 | 
						|
	struct mdiobb_ctrl *ctrl = bus->priv;
 | 
						|
 | 
						|
	module_put(ctrl->ops->owner);
 | 
						|
	mdiobus_free(bus);
 | 
						|
}
 | 
						|
EXPORT_SYMBOL(free_mdio_bitbang);
 | 
						|
 | 
						|
MODULE_LICENSE("GPL");
 |