453 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			453 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
 | 
						|
 * flexcop-pci.c - covers the PCI part including DMA transfers
 | 
						|
 * see flexcop.c for copyright information
 | 
						|
 */
 | 
						|
 | 
						|
#define FC_LOG_PREFIX "flexcop-pci"
 | 
						|
#include "flexcop-common.h"
 | 
						|
 | 
						|
static int enable_pid_filtering = 1;
 | 
						|
module_param(enable_pid_filtering, int, 0444);
 | 
						|
MODULE_PARM_DESC(enable_pid_filtering,
 | 
						|
	"enable hardware pid filtering: supported values: 0 (fullts), 1");
 | 
						|
 | 
						|
static int irq_chk_intv = 100;
 | 
						|
module_param(irq_chk_intv, int, 0644);
 | 
						|
MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 | 
						|
 | 
						|
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
 | 
						|
#define dprintk(level,args...) \
 | 
						|
	do { if ((debug & level)) printk(args); } while (0)
 | 
						|
#define DEBSTATUS ""
 | 
						|
#else
 | 
						|
#define dprintk(level,args...)
 | 
						|
#define DEBSTATUS " (debugging is not enabled)"
 | 
						|
#endif
 | 
						|
 | 
						|
#define deb_info(args...) dprintk(0x01, args)
 | 
						|
#define deb_reg(args...) dprintk(0x02, args)
 | 
						|
#define deb_ts(args...) dprintk(0x04, args)
 | 
						|
#define deb_irq(args...) dprintk(0x08, args)
 | 
						|
#define deb_chk(args...) dprintk(0x10, args)
 | 
						|
 | 
						|
static int debug;
 | 
						|
module_param(debug, int, 0644);
 | 
						|
MODULE_PARM_DESC(debug,
 | 
						|
	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
 | 
						|
	DEBSTATUS);
 | 
						|
 | 
						|
#define DRIVER_VERSION "0.1"
 | 
						|
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
 | 
						|
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
 | 
						|
 | 
						|
struct flexcop_pci {
 | 
						|
	struct pci_dev *pdev;
 | 
						|
 | 
						|
#define FC_PCI_INIT     0x01
 | 
						|
#define FC_PCI_DMA_INIT 0x02
 | 
						|
	int init_state;
 | 
						|
 | 
						|
	void __iomem *io_mem;
 | 
						|
	u32 irq;
 | 
						|
	/* buffersize (at least for DMA1, need to be % 188 == 0,
 | 
						|
	 * this logic is required */
 | 
						|
#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
 | 
						|
#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
 | 
						|
	struct flexcop_dma dma[2];
 | 
						|
 | 
						|
	int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
 | 
						|
	u32 last_dma1_cur_pos;
 | 
						|
	/* position of the pointer last time the timer/packet irq occured */
 | 
						|
	int count;
 | 
						|
	int count_prev;
 | 
						|
	int stream_problem;
 | 
						|
 | 
						|
	spinlock_t irq_lock;
 | 
						|
	unsigned long last_irq;
 | 
						|
 | 
						|
	struct delayed_work irq_check_work;
 | 
						|
	struct flexcop_device *fc_dev;
 | 
						|
};
 | 
						|
 | 
						|
static int lastwreg, lastwval, lastrreg, lastrval;
 | 
						|
 | 
						|
static flexcop_ibi_value flexcop_pci_read_ibi_reg(struct flexcop_device *fc,
 | 
						|
		flexcop_ibi_register r)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci = fc->bus_specific;
 | 
						|
	flexcop_ibi_value v;
 | 
						|
	v.raw = readl(fc_pci->io_mem + r);
 | 
						|
 | 
						|
	if (lastrreg != r || lastrval != v.raw) {
 | 
						|
		lastrreg = r; lastrval = v.raw;
 | 
						|
		deb_reg("new rd: %3x: %08x\n", r, v.raw);
 | 
						|
	}
 | 
						|
 | 
						|
	return v;
 | 
						|
}
 | 
						|
 | 
						|
static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc,
 | 
						|
		flexcop_ibi_register r, flexcop_ibi_value v)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci = fc->bus_specific;
 | 
						|
 | 
						|
	if (lastwreg != r || lastwval != v.raw) {
 | 
						|
		lastwreg = r; lastwval = v.raw;
 | 
						|
		deb_reg("new wr: %3x: %08x\n", r, v.raw);
 | 
						|
	}
 | 
						|
 | 
						|
	writel(v.raw, fc_pci->io_mem + r);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void flexcop_pci_irq_check_work(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci =
 | 
						|
		container_of(work, struct flexcop_pci, irq_check_work.work);
 | 
						|
	struct flexcop_device *fc = fc_pci->fc_dev;
 | 
						|
 | 
						|
	if (fc->feedcount) {
 | 
						|
 | 
						|
		if (fc_pci->count == fc_pci->count_prev) {
 | 
						|
			deb_chk("no IRQ since the last check\n");
 | 
						|
			if (fc_pci->stream_problem++ == 3) {
 | 
						|
				struct dvb_demux_feed *feed;
 | 
						|
				deb_info("flexcop-pci: stream problem, resetting pid filter\n");
 | 
						|
 | 
						|
				spin_lock_irq(&fc->demux.lock);
 | 
						|
				list_for_each_entry(feed, &fc->demux.feed_list,
 | 
						|
						list_head) {
 | 
						|
					flexcop_pid_feed_control(fc, feed, 0);
 | 
						|
				}
 | 
						|
 | 
						|
				list_for_each_entry(feed, &fc->demux.feed_list,
 | 
						|
						list_head) {
 | 
						|
					flexcop_pid_feed_control(fc, feed, 1);
 | 
						|
				}
 | 
						|
				spin_unlock_irq(&fc->demux.lock);
 | 
						|
 | 
						|
				fc_pci->stream_problem = 0;
 | 
						|
			}
 | 
						|
		} else {
 | 
						|
			fc_pci->stream_problem = 0;
 | 
						|
			fc_pci->count_prev = fc_pci->count;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	schedule_delayed_work(&fc_pci->irq_check_work,
 | 
						|
			msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
 | 
						|
}
 | 
						|
 | 
						|
/* When PID filtering is turned on, we use the timer IRQ, because small amounts
 | 
						|
 * of data need to be passed to the user space instantly as well. When PID
 | 
						|
 * filtering is turned off, we use the page-change-IRQ */
 | 
						|
static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci = dev_id;
 | 
						|
	struct flexcop_device *fc = fc_pci->fc_dev;
 | 
						|
	unsigned long flags;
 | 
						|
	flexcop_ibi_value v;
 | 
						|
	irqreturn_t ret = IRQ_HANDLED;
 | 
						|
 | 
						|
	spin_lock_irqsave(&fc_pci->irq_lock, flags);
 | 
						|
	v = fc->read_ibi_reg(fc, irq_20c);
 | 
						|
 | 
						|
	/* errors */
 | 
						|
	if (v.irq_20c.Data_receiver_error)
 | 
						|
		deb_chk("data receiver error\n");
 | 
						|
	if (v.irq_20c.Continuity_error_flag)
 | 
						|
		deb_chk("Contunuity error flag is set\n");
 | 
						|
	if (v.irq_20c.LLC_SNAP_FLAG_set)
 | 
						|
		deb_chk("LLC_SNAP_FLAG_set is set\n");
 | 
						|
	if (v.irq_20c.Transport_Error)
 | 
						|
		deb_chk("Transport error\n");
 | 
						|
 | 
						|
	if ((fc_pci->count % 1000) == 0)
 | 
						|
		deb_chk("%d valid irq took place so far\n", fc_pci->count);
 | 
						|
 | 
						|
	if (v.irq_20c.DMA1_IRQ_Status == 1) {
 | 
						|
		if (fc_pci->active_dma1_addr == 0)
 | 
						|
			flexcop_pass_dmx_packets(fc_pci->fc_dev,
 | 
						|
					fc_pci->dma[0].cpu_addr0,
 | 
						|
					fc_pci->dma[0].size / 188);
 | 
						|
		else
 | 
						|
			flexcop_pass_dmx_packets(fc_pci->fc_dev,
 | 
						|
					fc_pci->dma[0].cpu_addr1,
 | 
						|
					fc_pci->dma[0].size / 188);
 | 
						|
 | 
						|
		deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
 | 
						|
		fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
 | 
						|
		/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
 | 
						|
		 * complete TS packets when reading from the DMA memory */
 | 
						|
	} else if (v.irq_20c.DMA1_Timer_Status == 1) {
 | 
						|
		dma_addr_t cur_addr =
 | 
						|
			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
 | 
						|
		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
 | 
						|
 | 
						|
		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
 | 
						|
			"last_cur_pos: %08x ",
 | 
						|
				jiffies_to_usecs(jiffies - fc_pci->last_irq),
 | 
						|
				v.raw, (unsigned long long)cur_addr, cur_pos,
 | 
						|
				fc_pci->last_dma1_cur_pos);
 | 
						|
		fc_pci->last_irq = jiffies;
 | 
						|
 | 
						|
		/* buffer end was reached, restarted from the beginning
 | 
						|
		 * pass the data from last_cur_pos to the buffer end to the demux
 | 
						|
		 */
 | 
						|
		if (cur_pos < fc_pci->last_dma1_cur_pos) {
 | 
						|
			deb_irq(" end was reached: passing %d bytes ",
 | 
						|
				(fc_pci->dma[0].size*2 - 1) -
 | 
						|
				fc_pci->last_dma1_cur_pos);
 | 
						|
			flexcop_pass_dmx_data(fc_pci->fc_dev,
 | 
						|
				fc_pci->dma[0].cpu_addr0 +
 | 
						|
					fc_pci->last_dma1_cur_pos,
 | 
						|
				(fc_pci->dma[0].size*2) -
 | 
						|
					fc_pci->last_dma1_cur_pos);
 | 
						|
			fc_pci->last_dma1_cur_pos = 0;
 | 
						|
		}
 | 
						|
 | 
						|
		if (cur_pos > fc_pci->last_dma1_cur_pos) {
 | 
						|
			deb_irq(" passing %d bytes ",
 | 
						|
				cur_pos - fc_pci->last_dma1_cur_pos);
 | 
						|
			flexcop_pass_dmx_data(fc_pci->fc_dev,
 | 
						|
				fc_pci->dma[0].cpu_addr0 +
 | 
						|
					fc_pci->last_dma1_cur_pos,
 | 
						|
				cur_pos - fc_pci->last_dma1_cur_pos);
 | 
						|
		}
 | 
						|
		deb_irq("\n");
 | 
						|
 | 
						|
		fc_pci->last_dma1_cur_pos = cur_pos;
 | 
						|
		fc_pci->count++;
 | 
						|
	} else {
 | 
						|
		deb_irq("isr for flexcop called, "
 | 
						|
			"apparently without reason (%08x)\n", v.raw);
 | 
						|
		ret = IRQ_NONE;
 | 
						|
	}
 | 
						|
 | 
						|
	spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci = fc->bus_specific;
 | 
						|
	if (onoff) {
 | 
						|
		flexcop_dma_config(fc, &fc_pci->dma[0], FC_DMA_1);
 | 
						|
		flexcop_dma_config(fc, &fc_pci->dma[1], FC_DMA_2);
 | 
						|
		flexcop_dma_config_timer(fc, FC_DMA_1, 0);
 | 
						|
		flexcop_dma_xfer_control(fc, FC_DMA_1,
 | 
						|
				FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 1);
 | 
						|
		deb_irq("DMA xfer enabled\n");
 | 
						|
 | 
						|
		fc_pci->last_dma1_cur_pos = 0;
 | 
						|
		flexcop_dma_control_timer_irq(fc, FC_DMA_1, 1);
 | 
						|
		deb_irq("IRQ enabled\n");
 | 
						|
		fc_pci->count_prev = fc_pci->count;
 | 
						|
	} else {
 | 
						|
		flexcop_dma_control_timer_irq(fc, FC_DMA_1, 0);
 | 
						|
		deb_irq("IRQ disabled\n");
 | 
						|
 | 
						|
		flexcop_dma_xfer_control(fc, FC_DMA_1,
 | 
						|
			 FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 0);
 | 
						|
		deb_irq("DMA xfer disabled\n");
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[0],
 | 
						|
			FC_DEFAULT_DMA1_BUFSIZE);
 | 
						|
	if (ret != 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[1],
 | 
						|
			FC_DEFAULT_DMA2_BUFSIZE);
 | 
						|
	if (ret != 0) {
 | 
						|
		flexcop_dma_free(&fc_pci->dma[0]);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_MEDIA |
 | 
						|
			FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
 | 
						|
	flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_CAO |
 | 
						|
			FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
 | 
						|
	fc_pci->init_state |= FC_PCI_DMA_INIT;
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci)
 | 
						|
{
 | 
						|
	if (fc_pci->init_state & FC_PCI_DMA_INIT) {
 | 
						|
		flexcop_dma_free(&fc_pci->dma[0]);
 | 
						|
		flexcop_dma_free(&fc_pci->dma[1]);
 | 
						|
	}
 | 
						|
	fc_pci->init_state &= ~FC_PCI_DMA_INIT;
 | 
						|
}
 | 
						|
 | 
						|
static int flexcop_pci_init(struct flexcop_pci *fc_pci)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 card_rev;
 | 
						|
 | 
						|
	pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev);
 | 
						|
	info("card revision %x", card_rev);
 | 
						|
 | 
						|
	if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
 | 
						|
		return ret;
 | 
						|
	pci_set_master(fc_pci->pdev);
 | 
						|
 | 
						|
	if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
 | 
						|
		goto err_pci_disable_device;
 | 
						|
 | 
						|
	fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800);
 | 
						|
 | 
						|
	if (!fc_pci->io_mem) {
 | 
						|
		err("cannot map io memory\n");
 | 
						|
		ret = -EIO;
 | 
						|
		goto err_pci_release_regions;
 | 
						|
	}
 | 
						|
 | 
						|
	pci_set_drvdata(fc_pci->pdev, fc_pci);
 | 
						|
	spin_lock_init(&fc_pci->irq_lock);
 | 
						|
	if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr,
 | 
						|
					IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
 | 
						|
		goto err_pci_iounmap;
 | 
						|
 | 
						|
	fc_pci->init_state |= FC_PCI_INIT;
 | 
						|
	return ret;
 | 
						|
 | 
						|
err_pci_iounmap:
 | 
						|
	pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
 | 
						|
	pci_set_drvdata(fc_pci->pdev, NULL);
 | 
						|
err_pci_release_regions:
 | 
						|
	pci_release_regions(fc_pci->pdev);
 | 
						|
err_pci_disable_device:
 | 
						|
	pci_disable_device(fc_pci->pdev);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void flexcop_pci_exit(struct flexcop_pci *fc_pci)
 | 
						|
{
 | 
						|
	if (fc_pci->init_state & FC_PCI_INIT) {
 | 
						|
		free_irq(fc_pci->pdev->irq, fc_pci);
 | 
						|
		pci_iounmap(fc_pci->pdev, fc_pci->io_mem);
 | 
						|
		pci_set_drvdata(fc_pci->pdev, NULL);
 | 
						|
		pci_release_regions(fc_pci->pdev);
 | 
						|
		pci_disable_device(fc_pci->pdev);
 | 
						|
	}
 | 
						|
	fc_pci->init_state &= ~FC_PCI_INIT;
 | 
						|
}
 | 
						|
 | 
						|
static int flexcop_pci_probe(struct pci_dev *pdev,
 | 
						|
		const struct pci_device_id *ent)
 | 
						|
{
 | 
						|
	struct flexcop_device *fc;
 | 
						|
	struct flexcop_pci *fc_pci;
 | 
						|
	int ret = -ENOMEM;
 | 
						|
 | 
						|
	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) {
 | 
						|
		err("out of memory\n");
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	/* general flexcop init */
 | 
						|
	fc_pci = fc->bus_specific;
 | 
						|
	fc_pci->fc_dev = fc;
 | 
						|
 | 
						|
	fc->read_ibi_reg = flexcop_pci_read_ibi_reg;
 | 
						|
	fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
 | 
						|
	fc->i2c_request = flexcop_i2c_request;
 | 
						|
	fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
 | 
						|
	fc->stream_control = flexcop_pci_stream_control;
 | 
						|
 | 
						|
	if (enable_pid_filtering)
 | 
						|
		info("will use the HW PID filter.");
 | 
						|
	else
 | 
						|
		info("will pass the complete TS to the demuxer.");
 | 
						|
 | 
						|
	fc->pid_filtering = enable_pid_filtering;
 | 
						|
	fc->bus_type = FC_PCI;
 | 
						|
	fc->dev = &pdev->dev;
 | 
						|
	fc->owner = THIS_MODULE;
 | 
						|
 | 
						|
	/* bus specific part */
 | 
						|
	fc_pci->pdev = pdev;
 | 
						|
	if ((ret = flexcop_pci_init(fc_pci)) != 0)
 | 
						|
		goto err_kfree;
 | 
						|
 | 
						|
	/* init flexcop */
 | 
						|
	if ((ret = flexcop_device_initialize(fc)) != 0)
 | 
						|
		goto err_pci_exit;
 | 
						|
 | 
						|
	/* init dma */
 | 
						|
	if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
 | 
						|
		goto err_fc_exit;
 | 
						|
 | 
						|
	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
 | 
						|
 | 
						|
	if (irq_chk_intv > 0)
 | 
						|
		schedule_delayed_work(&fc_pci->irq_check_work,
 | 
						|
				msecs_to_jiffies(irq_chk_intv < 100 ?
 | 
						|
					100 :
 | 
						|
					irq_chk_intv));
 | 
						|
	return ret;
 | 
						|
 | 
						|
err_fc_exit:
 | 
						|
	flexcop_device_exit(fc);
 | 
						|
err_pci_exit:
 | 
						|
	flexcop_pci_exit(fc_pci);
 | 
						|
err_kfree:
 | 
						|
	flexcop_device_kfree(fc);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* in theory every _exit function should be called exactly two times,
 | 
						|
 * here and in the bail-out-part of the _init-function
 | 
						|
 */
 | 
						|
static void flexcop_pci_remove(struct pci_dev *pdev)
 | 
						|
{
 | 
						|
	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
 | 
						|
 | 
						|
	if (irq_chk_intv > 0)
 | 
						|
		cancel_delayed_work(&fc_pci->irq_check_work);
 | 
						|
 | 
						|
	flexcop_pci_dma_exit(fc_pci);
 | 
						|
	flexcop_device_exit(fc_pci->fc_dev);
 | 
						|
	flexcop_pci_exit(fc_pci);
 | 
						|
	flexcop_device_kfree(fc_pci->fc_dev);
 | 
						|
}
 | 
						|
 | 
						|
static struct pci_device_id flexcop_pci_tbl[] = {
 | 
						|
	{ PCI_DEVICE(0x13d0, 0x2103) },
 | 
						|
	{ },
 | 
						|
};
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl);
 | 
						|
 | 
						|
static struct pci_driver flexcop_pci_driver = {
 | 
						|
	.name     = "b2c2_flexcop_pci",
 | 
						|
	.id_table = flexcop_pci_tbl,
 | 
						|
	.probe    = flexcop_pci_probe,
 | 
						|
	.remove   = flexcop_pci_remove,
 | 
						|
};
 | 
						|
 | 
						|
static int __init flexcop_pci_module_init(void)
 | 
						|
{
 | 
						|
	return pci_register_driver(&flexcop_pci_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit flexcop_pci_module_exit(void)
 | 
						|
{
 | 
						|
	pci_unregister_driver(&flexcop_pci_driver);
 | 
						|
}
 | 
						|
 | 
						|
module_init(flexcop_pci_module_init);
 | 
						|
module_exit(flexcop_pci_module_exit);
 | 
						|
 | 
						|
MODULE_AUTHOR(DRIVER_AUTHOR);
 | 
						|
MODULE_DESCRIPTION(DRIVER_NAME);
 | 
						|
MODULE_LICENSE("GPL");
 |