android/android_hardware_qcom_display
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
jellybean
android_hardware_qcom_display/libgralloc/framebuffer.cpp
Naomi Luis 7181de24ab hardware/qcom/display: Remove glfinish call 
There is no need to do a glFinish on every composition complete.
glFinish needs to be called for composition cycles where GPU and
copybit are both used for composition. This is because the GPU and
copybit operate on the same framebuffer.

(cherry picked from commit 7983c275ae3eb15fab931d301e6338f83ad4a75a)

Change-Id: If06da4ca60ec17122c3dd698558cbf08fec73251
2012-10-14 15:47:48 -07:00

465 lines
15 KiB
C++
Raw Permalink Blame History

/*
* Copyright (C) 2008 The Android Open Source Project
* Copyright (c) 2010-2012 Code Aurora Forum. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <sys/mman.h>
#include <cutils/log.h>
#include <cutils/properties.h>
#include <dlfcn.h>
#include <hardware/hardware.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/ioctl.h>
#include <string.h>
#include <stdlib.h>
#include <pthread.h>
#include <cutils/atomic.h>
#include <linux/fb.h>
#include <linux/msm_mdp.h>
#include <GLES/gl.h>
#include "gralloc_priv.h"
#include "fb_priv.h"
#include "gr.h"
#include <genlock.h>
#include <cutils/properties.h>
#include <profiler.h>
#define EVEN_OUT(x) if (x & 0x0001) {x--;}
/** min of int a, b */
static inline int min(int a, int b) {
return (a<b) ? a : b;
}
/** max of int a, b */
static inline int max(int a, int b) {
return (a>b) ? a : b;
}
enum {
PAGE_FLIP = 0x00000001,
LOCKED = 0x00000002
};
struct fb_context_t {
framebuffer_device_t device;
};
static int fb_setSwapInterval(struct framebuffer_device_t* dev,
int interval)
{
//XXX: Get the value here and implement along with
//single vsync in HWC
char pval[PROPERTY_VALUE_MAX];
property_get("debug.egl.swapinterval", pval, "-1");
int property_interval = atoi(pval);
if (property_interval >= 0)
interval = property_interval;
fb_context_t* ctx = (fb_context_t*)dev;
private_module_t* m = reinterpret_cast<private_module_t*>(
dev->common.module);
if (interval < dev->minSwapInterval || interval > dev->maxSwapInterval)
return -EINVAL;
m->swapInterval = interval;
return 0;
}
static int fb_setUpdateRect(struct framebuffer_device_t* dev,
int l, int t, int w, int h)
{
if (((w|h) <= 0) || ((l|t)<0))
return -EINVAL;
fb_context_t* ctx = (fb_context_t*)dev;
private_module_t* m = reinterpret_cast<private_module_t*>(
dev->common.module);
m->info.reserved[0] = 0x54445055; // "UPDT";
m->info.reserved[1] = (uint16_t)l | ((uint32_t)t << 16);
m->info.reserved[2] = (uint16_t)(l+w) | ((uint32_t)(t+h) << 16);
return 0;
}
static int fb_post(struct framebuffer_device_t* dev, buffer_handle_t buffer)
{
if (private_handle_t::validate(buffer) < 0)
return -EINVAL;
fb_context_t* ctx = (fb_context_t*) dev;
private_handle_t *hnd = static_cast<private_handle_t*>
(const_cast<native_handle_t*>(buffer));
private_module_t* m =
reinterpret_cast<private_module_t*>(dev->common.module);
if (hnd->flags & private_handle_t::PRIV_FLAGS_FRAMEBUFFER) {
genlock_lock_buffer(hnd, GENLOCK_READ_LOCK, GENLOCK_MAX_TIMEOUT);
const size_t offset = hnd->base - m->framebuffer->base;
// frame ready to be posted, signal so that hwc can update External
// display
pthread_mutex_lock(&m->fbPostLock);
m->currentOffset = offset;
m->fbPostDone = true;
pthread_cond_signal(&m->fbPostCond);
pthread_mutex_unlock(&m->fbPostLock);
m->info.activate = FB_ACTIVATE_VBL;
m->info.yoffset = offset / m->finfo.line_length;
if (ioctl(m->framebuffer->fd, FBIOPUT_VSCREENINFO, &m->info) == -1) {
ALOGE("FBIOPUT_VSCREENINFO failed");
genlock_unlock_buffer(hnd);
return -errno;
}
//Signals the composition thread to unblock and loop over if necessary
pthread_mutex_lock(&m->fbPanLock);
m->fbPanDone = true;
pthread_cond_signal(&m->fbPanCond);
pthread_mutex_unlock(&m->fbPanLock);
if (m->currentBuffer) {
genlock_unlock_buffer(m->currentBuffer);
m->currentBuffer = 0;
}
CALC_FPS();
m->currentBuffer = hnd;
}
return 0;
}
static int fb_compositionComplete(struct framebuffer_device_t* dev)
{
// TODO: Properly implement composition complete callback
return 0;
}
int mapFrameBufferLocked(struct private_module_t* module)
{
// already initialized...
if (module->framebuffer) {
return 0;
}
char const * const device_template[] = {
"/dev/graphics/fb%u",
"/dev/fb%u",
0 };
int fd = -1;
int i=0;
char name[64];
char property[PROPERTY_VALUE_MAX];
while ((fd==-1) && device_template[i]) {
snprintf(name, 64, device_template[i], 0);
fd = open(name, O_RDWR, 0);
i++;
}
if (fd < 0)
return -errno;
struct fb_fix_screeninfo finfo;
if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo) == -1)
return -errno;
struct fb_var_screeninfo info;
if (ioctl(fd, FBIOGET_VSCREENINFO, &info) == -1)
return -errno;
info.reserved[0] = 0;
info.reserved[1] = 0;
info.reserved[2] = 0;
info.xoffset = 0;
info.yoffset = 0;
info.activate = FB_ACTIVATE_NOW;
/* Interpretation of offset for color fields: All offsets are from the
* right, inside a "pixel" value, which is exactly 'bits_per_pixel' wide
* (means: you can use the offset as right argument to <<). A pixel
* afterwards is a bit stream and is written to video memory as that
* unmodified. This implies big-endian byte order if bits_per_pixel is
* greater than 8.
*/
if(info.bits_per_pixel == 32) {
/*
* Explicitly request RGBA_8888
*/
info.bits_per_pixel = 32;
info.red.offset = 24;
info.red.length = 8;
info.green.offset = 16;
info.green.length = 8;
info.blue.offset = 8;
info.blue.length = 8;
info.transp.offset = 0;
info.transp.length = 8;
/* Note: the GL driver does not have a r=8 g=8 b=8 a=0 config, so if we
* do not use the MDP for composition (i.e. hw composition == 0), ask
* for RGBA instead of RGBX. */
if (property_get("debug.sf.hw", property, NULL) > 0 &&
atoi(property) == 0)
module->fbFormat = HAL_PIXEL_FORMAT_RGBX_8888;
else if(property_get("debug.composition.type", property, NULL) > 0 &&
(strncmp(property, "mdp", 3) == 0))
module->fbFormat = HAL_PIXEL_FORMAT_RGBX_8888;
else
module->fbFormat = HAL_PIXEL_FORMAT_RGBA_8888;
} else {
/*
* Explicitly request 5/6/5
*/
info.bits_per_pixel = 16;
info.red.offset = 11;
info.red.length = 5;
info.green.offset = 5;
info.green.length = 6;
info.blue.offset = 0;
info.blue.length = 5;
info.transp.offset = 0;
info.transp.length = 0;
module->fbFormat = HAL_PIXEL_FORMAT_RGB_565;
}
//adreno needs 4k aligned offsets. Max hole size is 4096-1
int size = roundUpToPageSize(info.yres * info.xres *
(info.bits_per_pixel/8));
/*
* Request NUM_BUFFERS screens (at least 2 for page flipping)
*/
int numberOfBuffers = (int)(finfo.smem_len/size);
ALOGV("num supported framebuffers in kernel = %d", numberOfBuffers);
if (property_get("debug.gr.numframebuffers", property, NULL) > 0) {
int num = atoi(property);
if ((num >= NUM_FRAMEBUFFERS_MIN) && (num <= NUM_FRAMEBUFFERS_MAX)) {
numberOfBuffers = num;
}
}
if (numberOfBuffers > NUM_FRAMEBUFFERS_MAX)
numberOfBuffers = NUM_FRAMEBUFFERS_MAX;
ALOGV("We support %d buffers", numberOfBuffers);
//consider the included hole by 4k alignment
uint32_t line_length = (info.xres * info.bits_per_pixel / 8);
info.yres_virtual = (size * numberOfBuffers) / line_length;
#ifndef NO_HW_VSYNC
struct msmfb_metadata metadata;
metadata.op = metadata_op_base_blend;
metadata.flags = 0;
metadata.data.blend_cfg.is_premultiplied = 1;
if(ioctl(fd, MSMFB_METADATA_SET, &metadata) == -1) {
ALOGW("MSMFB_METADATA_SET failed to configure alpha mode");
}
#endif
uint32_t flags = PAGE_FLIP;
if (ioctl(fd, FBIOPUT_VSCREENINFO, &info) == -1) {
info.yres_virtual = size / line_length;
flags &= ~PAGE_FLIP;
ALOGW("FBIOPUT_VSCREENINFO failed, page flipping not supported");
}
if (info.yres_virtual < ((size * 2) / line_length) ) {
// we need at least 2 for page-flipping
info.yres_virtual = size / line_length;
flags &= ~PAGE_FLIP;
ALOGW("page flipping not supported (yres_virtual=%d, requested=%d)",
info.yres_virtual, info.yres*2);
}
if (ioctl(fd, FBIOGET_VSCREENINFO, &info) == -1)
return -errno;
if (int(info.width) <= 0 || int(info.height) <= 0) {
// the driver doesn't return that information
// default to 160 dpi
info.width = ((info.xres * 25.4f)/160.0f + 0.5f);
info.height = ((info.yres * 25.4f)/160.0f + 0.5f);
}
float xdpi = (info.xres * 25.4f) / info.width;
float ydpi = (info.yres * 25.4f) / info.height;
//The reserved[4] field is used to store FPS by the driver.
float fps = info.reserved[4];
ALOGI("using (fd=%d)\n"
"id = %s\n"
"xres = %d px\n"
"yres = %d px\n"
"xres_virtual = %d px\n"
"yres_virtual = %d px\n"
"bpp = %d\n"
"r = %2u:%u\n"
"g = %2u:%u\n"
"b = %2u:%u\n",
fd,
finfo.id,
info.xres,
info.yres,
info.xres_virtual,
info.yres_virtual,
info.bits_per_pixel,
info.red.offset, info.red.length,
info.green.offset, info.green.length,
info.blue.offset, info.blue.length
);
ALOGI("width = %d mm (%f dpi)\n"
"height = %d mm (%f dpi)\n"
"refresh rate = %.2f Hz\n",
info.width, xdpi,
info.height, ydpi,
fps
);
if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo) == -1)
return -errno;
if (finfo.smem_len <= 0)
return -errno;
module->flags = flags;
module->info = info;
module->finfo = finfo;
module->xdpi = xdpi;
module->ydpi = ydpi;
module->fps = fps;
module->swapInterval = 1;
CALC_INIT();
/*
* map the framebuffer
*/
int err;
module->numBuffers = info.yres_virtual / info.yres;
module->bufferMask = 0;
//adreno needs page aligned offsets. Align the fbsize to pagesize.
size_t fbSize = roundUpToPageSize(finfo.line_length * info.yres)*
module->numBuffers;
module->framebuffer = new private_handle_t(fd, fbSize,
private_handle_t::PRIV_FLAGS_USES_PMEM,
BUFFER_TYPE_UI,
module->fbFormat, info.xres, info.yres);
void* vaddr = mmap(0, fbSize, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
if (vaddr == MAP_FAILED) {
ALOGE("Error mapping the framebuffer (%s)", strerror(errno));
return -errno;
}
module->framebuffer->base = intptr_t(vaddr);
memset(vaddr, 0, fbSize);
module->currentOffset = 0;
module->fbPostDone = false;
pthread_mutex_init(&(module->fbPostLock), NULL);
pthread_cond_init(&(module->fbPostCond), NULL);
module->fbPanDone = false;
pthread_mutex_init(&(module->fbPanLock), NULL);
pthread_cond_init(&(module->fbPanCond), NULL);
return 0;
}
static int mapFrameBuffer(struct private_module_t* module)
{
pthread_mutex_lock(&module->lock);
int err = mapFrameBufferLocked(module);
pthread_mutex_unlock(&module->lock);
return err;
}
/*****************************************************************************/
static int fb_close(struct hw_device_t *dev)
{
fb_context_t* ctx = (fb_context_t*)dev;
if (ctx) {
free(ctx);
}
return 0;
}
int fb_device_open(hw_module_t const* module, const char* name,
hw_device_t** device)
{
int status = -EINVAL;
if (!strcmp(name, GRALLOC_HARDWARE_FB0)) {
alloc_device_t* gralloc_device;
status = gralloc_open(module, &gralloc_device);
if (status < 0)
return status;
/* initialize our state here */
fb_context_t *dev = (fb_context_t*)malloc(sizeof(*dev));
memset(dev, 0, sizeof(*dev));
/* initialize the procs */
dev->device.common.tag = HARDWARE_DEVICE_TAG;
dev->device.common.version = 0;
dev->device.common.module = const_cast<hw_module_t*>(module);
dev->device.common.close = fb_close;
dev->device.setSwapInterval = fb_setSwapInterval;
dev->device.post = fb_post;
dev->device.setUpdateRect = 0;
dev->device.compositionComplete = fb_compositionComplete;
private_module_t* m = (private_module_t*)module;
status = mapFrameBuffer(m);
if (status >= 0) {
int stride = m->finfo.line_length / (m->info.bits_per_pixel >> 3);
const_cast<uint32_t&>(dev->device.flags) = 0;
const_cast<uint32_t&>(dev->device.width) = m->info.xres;
const_cast<uint32_t&>(dev->device.height) = m->info.yres;
const_cast<int&>(dev->device.stride) = stride;
const_cast<int&>(dev->device.format) = m->fbFormat;
const_cast<float&>(dev->device.xdpi) = m->xdpi;
const_cast<float&>(dev->device.ydpi) = m->ydpi;
const_cast<float&>(dev->device.fps) = m->fps;
const_cast<int&>(dev->device.minSwapInterval) =
PRIV_MIN_SWAP_INTERVAL;
const_cast<int&>(dev->device.maxSwapInterval) =
PRIV_MAX_SWAP_INTERVAL;
const_cast<int&>(dev->device.numFramebuffers) = m->numBuffers;
if (m->finfo.reserved[0] == 0x5444 &&
m->finfo.reserved[1] == 0x5055) {
dev->device.setUpdateRect = fb_setUpdateRect;
ALOGD("UPDATE_ON_DEMAND supported");
}
*device = &dev->device.common;
}
// Close the gralloc module
gralloc_close(gralloc_device);
}
return status;
}
Reference in New Issue View Git Blame Copy Permalink