In case of failure, print out the values of the failed
overlay structure, to allow easy debugging.
Change-Id: I3e480b8eecc66b54f357b29d02064a751c9ebbfa
prepareOverlay will setup the channels for video playback, so
inform gralloc to close UI channels before they are setup.
Change-Id: I757a8fd79661eb66ccbe2ac1475e48740bbf1733
CRs-fixed: 298102
The source buffers, width/height is aligned. Use
aligned width/height for the source buffer.
CRs-fixed: 285831
Change-Id: I4c367a03fea833674e03fcab5a38217f9f8c5e05
In setPosition, make an ioctl call only when there is a change
in the destination values.
CRs-fixed: 296400
Change-Id: I9b059e226bf6f6cfd04fb563ac765e2583415157
Create a new function to check if we need to skip the composition
during overlay operations.
Reset the previous compCount variable if there is no video layer present.
Change-Id: Ibf570805114440f117f0fb98b5f2d53c1780ec84
CRs-fixed: 298014
Check the PMEM_ADSP flag during the terminateBuffer and gralloc_unmap
operations.
CRs-fixed: 296807, 298849, 296817
Change-Id: Ia97aca71935ca3c921f53fc88f5b4f918d7434c0
-FM playback with alarm is not behaving as expected as FM Audio
also plays with alarm on speaker.
-With headset,this case working fine.found the tester used
Headphone and the stream mute for FM is not handled in
setoutputdevice function in policy manager.
-Added the Check for headphone also in setoutputdevice
function and mute/unmute happens correctly now for FM
stream when alarm tone comes.
Change-Id: I9e82c3db5fab5c6ccade4f6ec7a49e4d05e0f772
CRs-Fixed: 292948
Add a fallback mechanism to allocate memory from ashmem if pmem
allocation fails.
Do not fallback in the following cases:
- MDP composition is being used.
- Client has explicitly requested that the memory be allocated from
pmem.
- Buffer will not be sent to the overlay.
Change-Id: Ic690af48f81914cb4c9a102cb386356797451141
Put HDMI code in HWC under compile time flag.
This prevents crashes in use cases like HDMI used as primary.
If not done, non-existing code in gralloc is called in that
use case.
Change-Id: Ic7e792acf0c35eb12f04a74405619385d7288991
When updating the overlay source information, reset the rotation
information as this would be set during the setParameter call.
Also ensure that the HDMI doesn't have any orientation set.
Change-Id: I7a8ae96f27046deeed32f968061cc524d57cbfa3
Rotator outputs non-tiled formats. Hence, if there is rotation,
tiled format needs to be set to non-tiled and aligned properly.
Change-Id: I88335ad49c2f7446aa5fa71db80f6051c02bb5ff
CRs-fixed: 290428
Add support for the GRALLOC_USAGE_EXTERNAL_DISP and the
GRALLOC_USAGE_PROTECTED usage bits. If any of the two usage bits are
set, we need to send the buffers to the overlay.
Since we send the buffers to the overlay, we need to allocate these
buffers from the PMEM region.
(cherry picked from commit 195345cd63f0e19cfee4cf055587d5fffe76d0ef)
Change-Id: I64116b9be07c8ddadbd5a132ef21b19e5326737b
Add support in the overlay for the YV12 color format.
(cherry picked from commit 0f9a27cc39b6d4202b54059bc7c64eea9efcf3f1)
Change-Id: I4b57eb383ca8f728243bd7e397696932e26c8889
The overlay_buffer_info buffer geometry and size. When calling the
overlay from the gralloc or hardware composer, populate this structure
with the information from the gralloc handle.
(cherry picked from commit 128adc3b8177ef72f2bf21f4022d7ef06ed9281b)
Change-Id: I2f60f691ac01e67f150c753f168be754b14f94e6
Separate overlay setup and overlay play.
On setup failure, mark the layer to use C2D if enabled.
Else mark the layer to use GPU.
CRs-fixed: 292398
(cherry picked from commit b1459b0b1106ed66810b1c5a09878fae353c123c)
Change-Id: Id4c27384193612ab13e87d18492b0fef662eb8b4
The FPS is stored in reserved[4] field of fb_var_screeninfo
structure. Read directly from this field.
CRs-fixed: 283750
(cherry picked from commit 0dec3f333db5b58c5ddd9c65fb7fd5c61cc5ef59)
Change-Id: I26632dc489ed8a95502b9071fed5b7527b33e54d
- Remove unused GRALLOC_USAGE_PRIVATE_PMEM flag. This flag is no
longer used.
- Flush ashmem region cache instead of Invalidating it.
(cherry picked from commit 12254ff74f5a97dcf5ded90f53e9d6fd0fa47b9c)
Change-Id: I92e4dcd8c89eb9ae0c0484f039d152b7bbb28bbe
If SurfaceFlinger marks a layer with the HWC_DO_NOT_USE_OVERLAY
flag, do not use the overlay to draw the layer
(cherry picked from commit 9271a839b6bbbdc7b22bd7f1dca6f4c0c63de965)
Change-Id: Ie44586a1254a2dc2ad41ae902debc5bb442cbfde
Android expects the flip to be done before the rotation. The rotator
however performs the rotate operation first followed by flip operations.
Set the flip information to take this into account.
Change-Id: Ib59a08e72fad522b0cf70c2ac2c434e19683c356
CRs-fixed: 289118
If we have only one overlay layer, and the rest of the layers
are not updating, set the HWC_SKIP_COMPOSITION flag to inform
SurfaceFlinger not to compose anything. Also skip the drawing of
any UI frames and swapping the buffers.
Change-Id: I2f6554c905756a08880cba531c0210a58396179b
CRs-fixed: 289477
The patch sets the status as COPYBIT_FAILURE in case of an error in
open_copybit() as it needs to return the correct status. It also sets
the copybit device handle as NULL.
Change-Id: I3c35d163049763427ad92030cb1d88d72f7680fb
This change addresses following:
1. Add new classes for comp. bypass.
2. Remove comp. bypas specific code from exisiting flow.
Change-Id: Id9424b42a9a113cfbb18ceac8d59bbe07ea8e773
Removing submapping for buffers allocated by the PmemKernelAllocator
This can be done since the restriction on multiple master maps has
been removed from the kernel
Change-Id: Iabe9cdfaa121bbffbfaf6503e037afebf5ac8455
This is necessary to adjust aspect ratio based on the crop, since
src values are modified in crop.
Change-Id: Icfb20df5b6ac4e93dfa85b73c4f74b738a4d3e59
CRs-fixed: 290069
Small videos (width < 128) have their stride as 128. For HDMI
destination position was set only once, before the actual width was
supplied through crop. Now the position is set during a setPosition
API call.
Change-Id: If49ac23b9294951aaf4ad9d5432653082b4a7802
CRs-fixed: 286953
If the layer blending has been disabled, disable copybit alpha so
that copybit does not perform any blend operation.
Change-Id: I9a83fad0f126adaf9540bc72d17e7dcb1c55cd0f
CRs-fixed: 288527
Whenever there is a resolution change, update the overlay, rotator
paramters. Map the rotator memory according to the new size required,
and unmap the previously mapped memory.
Change the size calculation for NV21 formats, since the gralloc
allocates memory which is rounded up to the next 4K.
Change-Id: Idb4037422cbd80083e6ba14f229511a17cb61873
CRs-fixed: 287347
Add the state machine for overlay configuration. When connected,
check whether the TV on HDMI is 3D capable or not using the EDID
info. Show L channel on primary panel; and R channel on 2D TV if
non 3DTV is connected via HDMI, else switch TV to 3D mode.
Change-Id: I3109f8b0b81a8f5ad542db038262fd668e225e96
Allocate buffer sizes that are multiples of 4K for the NV21, NV12 and
YV12 formats.
Change-Id: I3febaef9dda2586ef3b35945f30f655e07f5e369
CRs-fixed: 287882
- Inform the gralloc of the HDMI status.
- If the HDMI is disconnected, close the overlay and also inform the
gralloc that video mirroring has stopped.
Change-Id: Ie89ffe860c0f9c9142d6c7f5d7a6c555884561ce
CRs-fixed: 286954
- Stagefright no longer sends the OMX Formats to the gralloc, remove
unnecessary code from the function.
- Add support for the YV12 format in getGrallocInformationFromFormat
Change-Id: Id21baf8890f07ef8fb8a32d3b0d218540005f469
The MDP kernel interprets the CRCB enum opposite to what Android
interprets it. Set the correct MDP enum value.
Change-Id: Iba9744fadadc42467dbf8979d6ed7d896c00ca10
When front camera is in use, overlay is created with 90 degree
rotation and vertical flip. This change considers 90 degree
rotation with flip, and updates the crop rectangle accordingly.
CRs-Fixed : 283348, 284193
Change-Id: Ia0d7830f12d607ae698b019396cd0e2bef168a6a
- The ioctl call from getOrientation is removed.
- In gralloc use getOrientation instead of storing the
orientation.
Change-Id: Idb08568ff5d46ce99e0a9a8c6f492b90bb666f0c
Set the premultiplied format for the source and destination formats if
COPYBIT_PREMULTIPLIED_ALPHA has been enabled
Change-Id: I89113a1f1160b921d8e49b5dd6fc01001307648f
CRs-fixed: 279449
Whenever there is a change in the buffer geometry, set a flag in the
gralloc handle stating that the buffer geometry has changed.
In the HWC, whenever we encounter an update in the geometry, if the
channel is already open, we just call the necessary ioctls to update
the overlay information and not unnecessarily open/close channels.
Change-Id: I27db8fc497ebc514e262d6b7854739f312644714
When the layer flags are marked to maintain the original surface
resolution, draw the layer using the overlay.
Store the HDMI status in the overlay object instead of the HWC
context.
