goomanager: update to 2.1.2

general: remove duplicate config_keyboardTapVibePattern entry

AndroidBoard.mk

@@ -25,12 +25,5 @@ LOCAL_PATH := $(call my-dir)
 
 include $(CLEAR_VARS)
 
-ALL_PREBUILT += $(INSTALLED_KERNEL_TARGET)
-
-file := $(TARGET_RECOVERY_ROOT_OUT)/sbin/postrecoveryboot.sh
-ALL_PREBUILT += $(file)
-$(file) : $(LOCAL_PATH)/postrecoveryboot.sh | $(ACP)
-	$(transform-prebuilt-to-target)
-
 # include the non-open-source counterpart to this file
 -include vendor/htc/leo/AndroidBoardVendor.mk

BoardConfig.mk

@@ -28,53 +28,29 @@ USE_CAMERA_STUB := false
 # inherit from the proprietary version
 -include vendor/htc/leo/BoardConfigVendor.mk
 
-TARGET_NO_BOOTLOADER := true
-
-TARGET_BOARD_PLATFORM := qsd8k
-TARGET_BOARD_PLATFORM_GPU := qcom-adreno200
+# include recovery offmode stuff
+-include device/htc/7x30-recovery/BoardConfigCommon.mk
 
 TARGET_CPU_ABI := armeabi-v7a
 TARGET_CPU_ABI2 := armeabi
 TARGET_ARCH_VARIANT := armv7-a-neon
 ARCH_ARM_HAVE_TLS_REGISTER := true
-TARGET_BOOTLOADER_BOARD_NAME := htcleo
 
-# Wifi related defines
-BOARD_WPA_SUPPLICANT_DRIVER := WEXT
-WPA_SUPPLICANT_VERSION      := VER_0_6_X
-BOARD_WLAN_DEVICE           := bcm4329
-WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/bcm4329.ko"
-WIFI_DRIVER_FW_STA_PATH     := "/vendor/firmware/fw_bcm4329.bin"
-WIFI_DRIVER_FW_AP_PATH      := "/vendor/firmware/fw_bcm4329_apsta.bin"
-WIFI_DRIVER_MODULE_ARG      := "firmware_path=/vendor/firmware/fw_bcm4329.bin nvram_path=/proc/calibration"
-WIFI_DRIVER_MODULE_NAME     := "bcm4329"
+TARGET_GLOBAL_CFLAGS += -mfpu=neon -mfloat-abi=softfp	
+TARGET_GLOBAL_CPPFLAGS += -mfpu=neon -mfloat-abi=softfp
 
-BOARD_KERNEL_CMDLINE := no_console_suspend=1 wire.search_count=5
+TARGET_NO_BOOTLOADER := true
 
-BOARD_USES_GENERIC_AUDIO := false
 BOARD_KERNEL_BASE := 0x11800000
-BOARD_KERNEL_NEW_PPPOX := true
+BOARD_KERNEL_CMDLINE := no_console_suspend=1 console=null
 
-BOARD_HAVE_BLUETOOTH := true
-BOARD_HAVE_BLUETOOTH_BCM := true
-
-BOARD_VENDOR_QCOM_AMSS_VERSION := 1550
-
-BOARD_VENDOR_USE_AKMD := akm8973
+TARGET_BOARD_PLATFORM := qsd8k
+TARGET_BOARD_PLATFORM_GPU := qcom-adreno200
+TARGET_BOOTLOADER_BOARD_NAME := htcleo
 
 BOARD_EGL_CFG := device/htc/leo/prebuilt/egl.cfg
 
-BOARD_USE_FROYO_LIBCAMERA := true
-
-TARGET_USES_16BPPSURFACE_FOR_OPAQUE := true
-BOARD_NO_RGBX_8888 := true
-BOARD_USES_QCOM_LIBS := true
-
-BOARD_USE_KINETO_COMPATIBILITY := true
-
-BOARD_HAVE_FM_RADIO := true
-BOARD_GLOBAL_CFLAGS += -DHAVE_FM_RADIO
-
+TARGET_RELEASETOOLS_EXTENSIONS := device/htc/common
 TARGET_CUSTOM_RELEASETOOL := device/htc/leo/releasetools/squisher
 
 # # cat /proc/mtd
@@ -92,14 +68,43 @@ BOARD_SYSTEMIMAGE_PARTITION_SIZE   := 0x09600000   # limited so we enforce room
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 0x0d900000
 BOARD_FLASH_BLOCK_SIZE := 131072
 
+# Wifi related defines
+BOARD_WPA_SUPPLICANT_DRIVER := WEXT
+WPA_SUPPLICANT_VERSION      := VER_0_6_X
+BOARD_WLAN_DEVICE           := bcm4329
+WIFI_DRIVER_MODULE_PATH     := "/system/lib/modules/bcm4329.ko"
+WIFI_DRIVER_FW_STA_PATH     := "/vendor/firmware/fw_bcm4329.bin"
+WIFI_DRIVER_FW_AP_PATH      := "/vendor/firmware/fw_bcm4329_apsta.bin"
+WIFI_DRIVER_MODULE_ARG      := "firmware_path=/vendor/firmware/fw_bcm4329.bin nvram_path=/proc/calibration"
+WIFI_DRIVER_MODULE_NAME     := "bcm4329"
+
+BOARD_HAVE_BLUETOOTH := true
+BOARD_HAVE_BLUETOOTH_BCM := true
+
+BOARD_USES_GENERIC_AUDIO := false
+BOARD_KERNEL_NEW_PPPOX := true
+
+BOARD_USES_QCOM_LIBS := true
+BOARD_VENDOR_QCOM_AMSS_VERSION := 1550
+BOARD_VENDOR_USE_AKMD := akm8973
+
+BOARD_USE_FROYO_LIBCAMERA := true
+BOARD_NO_RGBX_8888 := true
+
+BOARD_USE_KINETO_COMPATIBILITY := true
+
+BOARD_HAVE_FM_RADIO := true
+BOARD_GLOBAL_CFLAGS += -DHAVE_FM_RADIO
+
+TARGET_USES_16BPPSURFACE_FOR_OPAQUE := true
 
-TARGET_RELEASETOOLS_EXTENSIONS := device/htc/common
 TARGET_PREBUILT_KERNEL := device/htc/leo/prebuilt/kernel
+TARGET_PREBUILT_RECOVERY_KERNEL := device/htc/leo/prebuilt/recovery_kernel
 
 # to enable the GPS HAL
 BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := leo
 # AMSS version to use for GPS
 BOARD_VENDOR_QCOM_GPS_LOC_API_AMSS_VERSION := 3200
 
-TARGET_PREBUILT_RECOVERY_KERNEL := device/htc/leo/prebuilt/recovery_kernel
--include device/htc/7x30-recovery/BoardConfigCommon.mk
+BOARD_USES_GPSSHIM := true
+BOARD_GPS_LIBRARIES := libgps librpc

full_leo.mk

@@ -24,6 +24,9 @@ $(call inherit-product, $(SRC_TARGET_DIR)/product/languages_full.mk)
 $(call inherit-product, device/htc/leo/leo_eu.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/full.mk)
 
+# Leo uses high-density artwork where available
+PRODUCT_LOCALES += hdpi
+
 # Discard inherited values and use our own instead.
 PRODUCT_NAME := full_leo
 PRODUCT_DEVICE := leo

goo.mk

@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2012 the cmhtcleo team
+#
+# GooManager specific stuff
+#
+
+PRODUCT_PROPERTY_OVERRIDES += \
+        ro.goo.developerid=cmhtcleo \
+        ro.goo.rom=cm7nightly \
+        ro.goo.version=$(shell date +%s)
+
+# include goo manager
+PRODUCT_COPY_FILES += \
+       device/htc/leo/prebuilt/GooManager.apk:system/app/GooManager.apk

leo.mk

@@ -25,6 +25,11 @@
 PRODUCT_COPY_FILES += \
     device/htc/leo/prebuilt/init.htcleo.rc:root/init.htcleo.rc \
     device/htc/leo/prebuilt/ueventd.htcleo.rc:root/ueventd.htcleo.rc \
+	device/htc/leo/prebuilt/logo.rle:root/logo.rle
+
+# Copy the postrecoveryboot.sh to the relevant directory
+PRODUCT_COPY_FILES += \
+    device/htc/leo/postrecoveryboot.sh:recovery/root/sbin/postrecoveryboot.sh
 
 # we have enough storage space to hold precise GC data
 PRODUCT_TAGS += dalvik.gc.type-precise
@@ -66,10 +71,6 @@ PRODUCT_PACKAGES += \
     libhtc_ril_wrapper
 
 
-
-# leo uses high-density artwork where available 
-PRODUCT_LOCALES := hdpi
-
 PRODUCT_COPY_FILES += \
     device/htc/leo/prebuilt/vold.fstab:system/etc/vold.fstab
 
@@ -79,23 +80,15 @@ PRODUCT_COPY_FILES += \
     device/htc/leo/prebuilt/keylayout/leo-keypad.kcm.bin:system/usr/keychars/leo-keypad.kcm.bin \
     device/htc/leo/prebuilt/keylayout/h2w_headset.kl:system/usr/keylayout/h2w_headset.kl
 
-# Firmware
-PRODUCT_COPY_FILES += \
-    device/htc/leo/prebuilt/firmware/fw_bcm4329.bin:system/etc/firmware/fw_bcm4329.bin \
-    device/htc/leo/prebuilt/firmware/fw_bcm4329_apsta.bin:system/etc/firmware/fw_bcm4329_apsta.bin
-
 #GSM APN LIST
 PRODUCT_COPY_FILES += \
     vendor/cyanogen/prebuilt/common/etc/apns-conf.xml:system/etc/apns-conf.xml
 
-# kernel modules
-PRODUCT_COPY_FILES += \
-    device/htc/leo/prebuilt/modules/bcm4329.ko:system/lib/modules/bcm4329.ko \
-    device/htc/leo/prebuilt/modules/cifs.ko:system/lib/modules/cifs.ko \
-    device/htc/leo/prebuilt/modules/msm_rmnet.ko:system/lib/modules/msm_rmnet.ko \
-    device/htc/leo/prebuilt/modules/nls_utf8.ko:system/lib/modules/nls_utf8.ko \
-    device/htc/leo/prebuilt/modules/tun.ko:system/lib/modules/tun.ko \
-    device/htc/leo/prebuilt/modules/fuse.ko:system/lib/modules/fuse.ko
+# Kernel Modules
+PRODUCT_COPY_FILES += $(shell \
+    find device/htc/leo/prebuilt/modules -name '*.ko' \
+    | sed -r 's/^\/?(.*\/)([^/ ]+)$$/\1\2:system\/lib\/modules\/\2/' \
+    | tr '\n' ' ')
 
 # kernel
 PRODUCT_COPY_FILES += \
@@ -120,5 +113,8 @@ $(call inherit-product, device/htc/leo/media_a1026.mk)
 # stuff common to all HTC phones
 $(call inherit-product, device/htc/common/common.mk)
 
+# goo.im stuff
+$(call inherit-product, device/htc/leo/goo.mk)
+
 PRODUCT_NAME := htc_leo
 PRODUCT_DEVICE := leo

liblights/lights.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2008 The Android Open Source Project
+ * Copyright (C) 2012 milaq
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
@@ -44,9 +45,6 @@ static char const*const GREEN_LED_FILE
 static char const*const AMBER_LED_FILE
         = "/sys/class/leds/amber/brightness";
 
-static char const*const RED_LED_FILE
-        = "/sys/class/leds/red/brightness";
-
 static char const*const LCD_FILE
         = "/sys/class/leds/lcd-backlight/brightness";
 
@@ -56,13 +54,16 @@ static char const*const AMBER_BLINK_FILE
 static char const*const GREEN_BLINK_FILE
         = "/sys/class/leds/green/blink";
 
-static char const*const RED_BLINK_FILE
-        = "/sys/class/leds/red/blink";
-
 
 static char const*const BUTTON_FILE
         = "/sys/class/leds/button-backlight/brightness";
 
+enum {
+	LED_AMBER,
+	LED_GREEN,
+	LED_BLUE,
+	LED_BLANK,
+};
 
 /**
  * device methods
@@ -128,69 +129,75 @@ set_light_buttons(struct light_device_t* dev,
     return err;
 }
 
-static int
+static void
 set_speaker_light_locked(struct light_device_t* dev,
         struct light_state_t const* state)
 {
-    int len;
-    int alpha, red, green, blue;
-    int blink, freq, pwm;
-    int onMS, offMS;
-    unsigned int colorRGB;
+    	unsigned int colorRGB = state->color & 0xFFFFFF;
+	unsigned int color = LED_BLANK;
 
-    switch (state->flashMode) {
-        case LIGHT_FLASH_TIMED:
-            blink = 1;
-            onMS = state->flashOnMS;
-            offMS = state->flashOffMS;
-            break;
-        case LIGHT_FLASH_HARDWARE:
-            blink = 1;
-            onMS = state->flashOnMS;
-            offMS = state->flashOffMS;
-            break;
-        case LIGHT_FLASH_NONE:
-            blink = 0;
-            onMS = 0;
-            offMS = 0;
-            break;
-        default:
-            blink = 1;
-            onMS = 0;
-            offMS = 0;
-            break;
-    }
+	if (colorRGB & 0xFF)
+		color = LED_BLUE;
+	if ((colorRGB >> 8)&0xFF)
+		color = LED_GREEN;
+	if ((colorRGB >> 16)&0xFF)
+		color = LED_AMBER;
 
-    colorRGB = state->color;
+	int amber = (colorRGB >> 16)&0xFF;
+	int green = (colorRGB >> 8)&0xFF;
+	int blue = (colorRGB)&0xFF;
 
-#if 0
-    LOGD("set_speaker_light_locked colorRGB=%08X, onMS=%d, offMS=%d\n",
-            colorRGB, onMS, offMS);
-#endif
+	switch (state->flashMode) {
+		case LIGHT_FLASH_TIMED:
+			switch (color) {
+				case LED_AMBER:
+					write_int (AMBER_BLINK_FILE, 2);
+					write_int (GREEN_LED_FILE, 0);
+					break;
+				case LED_GREEN:
+					write_int (GREEN_BLINK_FILE, 3);
+					write_int (AMBER_LED_FILE, 0);
+					break;
+				case LED_BLUE:
+					write_int (GREEN_BLINK_FILE, 3);
+					write_int (AMBER_LED_FILE, 0);
+					break;
+				case LED_BLANK:
+					write_int (AMBER_BLINK_FILE, 0);
+					write_int (GREEN_BLINK_FILE, 0);
+					break;
+				default:
+					LOGE("set_led_state colorRGB=%08X, unknown color\n",
+							colorRGB);
+					break;
+			}
+			break;
+		case LIGHT_FLASH_NONE:
+			switch (color) {
+				case LED_AMBER:
+					write_int (AMBER_LED_FILE, 1);
+					write_int (GREEN_LED_FILE, 0);
+					break;
+				case LED_GREEN:
+					write_int (AMBER_LED_FILE, 0);
+					write_int (GREEN_LED_FILE, 1);
+					break;
+				case LED_BLUE:
+					write_int (AMBER_LED_FILE, 0);
+					write_int (GREEN_LED_FILE, 1);
+					break;
+				case LED_BLANK:
+					write_int (AMBER_LED_FILE, 0);
+					write_int (GREEN_LED_FILE, 0);
+					break;
 
-    red = (colorRGB >> 16) & 0xFF;
-    green = (colorRGB >> 8) & 0xFF;
-    blue = colorRGB & 0xFF;
+			}
+			break;
+		default:
+			LOGE("set_led_state colorRGB=%08X, unknown mode %d\n",
+					colorRGB, state->flashMode);
+	}
 
-    if (red) {
-        write_int(GREEN_LED_FILE, 0);
-        write_int(AMBER_LED_FILE, 1);
-        if (blink) {
-             //blink must come after brightness change
-             write_int(AMBER_BLINK_FILE, 1);
-        }
-    } else if (green || blue) {
-        write_int(AMBER_LED_FILE, 0);
-        write_int(GREEN_LED_FILE, 1);
-        if (blink) {
-             write_int(GREEN_BLINK_FILE, 1);
-        }
-    } else {
-        write_int(GREEN_LED_FILE, 0);
-        write_int(AMBER_LED_FILE, 0);
-    }
-
-    return 0;
 }
 
 static void
@@ -292,7 +299,7 @@ const struct hw_module_t HAL_MODULE_INFO_SYM = {
     .version_major = 1,
     .version_minor = 0,
     .id = LIGHTS_HARDWARE_MODULE_ID,
-    .name = "QCT MSM7K lights Module",
-    .author = "Google, Inc.",
+    .name = "HTC leo lights module",
+    .author = "Micha LaQua",
     .methods = &lights_module_methods,
 };

overlay/frameworks/base/core/res/res/values/config.xml

@@ -21,17 +21,21 @@
      for different hardware and product builds. -->
 <resources>
 
- <!-- Flag indicating whether the surface flinger has limited
+    <!-- Flag indicating whether the surface flinger has limited
          alpha compositing functionality in hardware.  If set, the window
          manager will disable alpha trasformation in animations where not
          strictly needed. -->
-    <bool name="config_sf_limitedAlpha">true</bool>
+    <bool name="config_sf_limitedAlpha">false</bool>
+
+    <!-- Flag indicating whether the surface flinger is inefficient
+         at performing a blur.  Used by parts of the UI to turn off
+         the blur effect where it isn't worth the performance hit. -->
+    <bool name="config_sf_slowBlur">true</bool>
 
     <!-- Flag indicating whether we should enable the automatic brightness in Settings.
          config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
     <bool name="config_automatic_brightness_available">true</bool>
 
-   
     <!-- disable menu hard key on HD2 in non-pattern lockscreen -->
     <bool name="config_disableMenuKeyInLockScreen">true</bool>
 
@@ -46,15 +50,13 @@
 
            Must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLevels">
-        <item>11</item>
-        <item>41</item>
-        <item>91</item>
-        <item>161</item>
-        <item>226</item>
-        <item>321</item>
-        <item>641</item>
-        <item>1281</item>
-        <item>2601</item>
+        <item>160</item>
+        <item>225</item>
+        <item>320</item>
+        <item>640</item>
+        <item>1280</item>
+        <item>2600</item>
+        <item>5800</item>
     </integer-array>
 
     <!-- Array of output values for LCD backlight corresponding to the LUX values
@@ -62,15 +64,13 @@
          than the size of the config_autoBrightnessLevels array.
     -->
     <integer-array name="config_autoBrightnessLcdBacklightValues">
-        <item>89</item>
-        <item>89</item>
-        <item>126</item>
-        <item>164</item>
-        <item>164</item>
-        <item>164</item>
-        <item>187</item>
-        <item>210</item>
-        <item>233</item>
+        <item>80</item>
+        <item>100</item>
+        <item>120</item>
+        <item>140</item>
+        <item>160</item>
+        <item>180</item>
+        <item>220</item>
         <item>255</item>
     </integer-array>
 
@@ -79,8 +79,6 @@
          than the size of the config_autoBrightnessLevels array.
     -->
      <integer-array name="config_autoBrightnessButtonBacklightValues">
-        <item>255</item>
-        <item>255</item>
         <item>255</item>
         <item>255</item>
         <item>0</item>
@@ -94,7 +92,7 @@
     <!-- Array of output values for keyboard backlight corresponding to the LUX values
          in the config_autoBrightnessLevels array.  This array should have size one greater
          than the size of the config_autoBrightnessLevels array.
-         Passion has no keyboard so all values are zero.
+         Leo has no keyboard so all values are zero.
     -->
     <integer-array name="config_autoBrightnessKeyboardBacklightValues">
         <item>0</item>
@@ -102,6 +100,9 @@
         <item>0</item>
         <item>0</item>
         <item>0</item>
+        <item>0</item>
+        <item>0</item>
+        <item>0</item>
     </integer-array>
     
     <!-- Component name of the default wallpaper. This will be ImageWallpaper if not 
@@ -163,12 +164,6 @@
         <item>"wl0.1"</item>
     </string-array>
 
-  <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
-    <integer-array name="config_keyboardTapVibePattern">
-        <item>30</item>
-    </integer-array>
-
-
     <!-- Boolean indicating if we require the use of DUN on mobile for tethering -->
     <bool translatable="false" name="config_tether_dun_required">false</bool>
 

overlay/frameworks/base/core/res/res/xml/power_profile.xml

@@ -19,12 +19,12 @@
 
 <device name="Android">
   <item name="none">0</item>
-  <item name="screen.on">100</item>
+  <item name="screen.on">110</item>
   <item name="bluetooth.active">142</item> <!-- In call -->
   <item name="bluetooth.on">0.3</item>
   <!-- CPU wakelock held for 830ms on bluetooth headset at command. 43mA * 830 -->
   <item name="bluetooth.at">35690</item>
-  <item name="screen.full">160</item>
+  <item name="screen.full">250</item>
   <item name="wifi.on">4</item>
   <item name="wifi.active">120</item>
   <item name="wifi.scan">220</item>
@@ -32,7 +32,7 @@
   <item name="dsp.video">88</item>
   <item name="radio.active">300</item>
   <item name="gps.on">170</item>
-  <item name="battery.capacity">1390</item>
+  <item name="battery.capacity">1230</item>
   <item name="radio.scanning">70</item>
   <array name="radio.on"> <!-- Strength 0 to BINS-1 -->
       <value>3</value>

overlay/packages/apps/Camera/res/values/config.xml

@@ -21,5 +21,5 @@
      for different hardware and product builds. -->
 <resources>
     <!-- Autofocus parameters -->
-    <!-- <string name="touchFocusParameter">touch-focus</string> -->
+    <string name="touchFocusParameter">touch-focus</string>
 </resources>

overlay/packages/apps/Mms/res/xml/mms_config.xml

@@ -22,13 +22,13 @@
 
 <mms_config version="3">
     <!-- Maximum message size in bytes for a MMS message -->
-    <int name="maxMessageSize">1048576</int>
+    <int name="maxMessageSize">307200</int>
 
     <!-- Maximum height for an attached image -->
-    <int name="maxImageHeight">1944</int>
+    <int name="maxImageHeight">768</int>
 
     <!-- Maximum width for an attached image -->
-    <int name="maxImageWidth">2592</int>
+    <int name="maxImageWidth">1024</int>
 
     <!-- User-Agent parameter used in MMS http request -->
     <string name="userAgent">Passion</string>

postrecoveryboot.sh

@@ -6,11 +6,16 @@ if [[ "`grep clk= /proc/cmdline`" == "" ]]; then
 sed -i 's/\/boot\t\tmtd/\/boot\t\tyaffs2/g' /etc/recovery.fstab
 fi
 
-# Commented out as it may or may not require this
+## Required for twrp recovery
 #mount /dev/block/mmcblk0p2 /sd-ext | grep sd-ext | awk '{print $5}'
 #FS=`mount | grep sd-ext | awk '{print $5}'`
 #umount /sd-ext
 #sed -i 's/\/sd-ext\ \ \ \ \ auto/\/sd-ext\t\t'$FS'/g' /etc/recovery.fstab
+#
+#if [[ "`grep mmcblk0p2 /etc/fstab` " != "" ]]; then
+#sed -i /mmcblk0p2/d /etc/fstab
+#fi
+#
 #cat >> /etc/fstab << EOF
 #/dev/block/mmcblk0p2 /sd-ext $FS rw
 #EOF

prebuilt/init.htcleo.rc

@@ -1,10 +1,6 @@
 on init
     export TERMINFO /system/etc/terminfo
 
-    symlink /dev/msm_camera/control0 /dev/msm_camera/control1
-    symlink /dev/msm_camera/frame0 /dev/msm_camera/frame1
-    symlink /dev/msm_camera/config0 /dev/msm_camera/config1
-
     write /proc/sys/kernel/sched_min_granularity_ns 100000
 
 on fs
@@ -49,11 +45,6 @@ on boot
     chown system system /data/misc/screen_lock_status
     chmod 644 /data/misc/screen_lock_status
 
-    # Write value must be consistent with the above properties.
-    # Note that the driver only supports 6 slots, so we have HOME_APP at the
-    # same memory level as services.
-    write /sys/module/lowmemorykiller/parameters/adj 0,1,2,7,14,15
-
     # Permissions for liblights
     chown system system /sys/class/leds/green/brightness
     chown system system /sys/class/leds/green/blink
@@ -79,11 +70,9 @@ on boot
     setprop ro.ril.def.agps.mode 2
 
     # performance tweaks for flash
-    write /sys/block/mtdblock3/bdi/read_ahead_kb 2048
-    write /sys/block/mtdblock4/bdi/read_ahead_kb 2048
-    write /sys/block/mtdblock5/bdi/read_ahead_kb 2048
-    # increase read throughput from sd card
-    write /sys/block/mmcblk0/bdi/read_ahead_kb 204
+    write /sys/block/mtdblock3/bdi/read_ahead_kb 4
+    write /sys/block/mtdblock4/bdi/read_ahead_kb 4
+    write /sys/block/mtdblock5/bdi/read_ahead_kb 4
 
     # for wireless modem
     chown system system /sys/module/serial/parameters/modem_enabled
@@ -190,34 +179,9 @@ on boot
     chmod 666 /sys/class/i2c-adapter/i2c-0/0-0018/scale
     chmod 666 /sys/class/i2c-adapter/i2c-0/0-0019/scale
 
-    # Power Management
-    # write /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate 40000
-
-    # Overwrite framework low memory killer minfree setting
-    write /sys/module/lowmemorykiller/parameters/minfree 3584,4096,6144,7168,7680,8192
-
     # Enable low memory killer to check file pages
-    write /sys/module/lowmemorykiller/parameters/minfile 0,0,0,5120,5632,6144
-    write /sys/module/lowmemorykiller/parameters/check_filepages 
-
-    # PPP stuff
-    chown radio radio /dev/smd1
-    chown root radio /system/etc/ppp
-    chown root root /system/bin/pppd;
-    chmod 755 /system/etc/ppp/*
-    chmod 4755 /system/bin/pppd
-  
-    if [ -f /system/ppp ]
-    then
-      # PPP enabled, doing PPP specific stuff
-
-      # Create link for resolv.conf (generated by pppd)
-      symlink /etc/ppp/resolv.conf /etc/resolv.conf
-
-      # Tweak kernel low memory handling
-      write /proc/sys/vm/lowmem_reserve_ratio 8 8
-      write /proc/sys/vm/min_free_kbytes 8192
-    fi
+    #write /sys/module/lowmemorykiller/parameters/minfile 0,0,0,5120,5632,6144
+    #write /sys/module/lowmemorykiller/parameters/check_filepages 1
  
 service hciattach /system/bin/brcm_patchram_plus --enable_hci --enable_lpm \
      --baudrate 3000000 --patchram /etc/firmware/bcm4329.hcd /dev/ttyHS0

prebuilt/media_profiles.xml

@@ -77,7 +77,7 @@
 -->
 <MediaSettings>
     <!-- Each camcorder profile defines a set of predefined configuration parameters -->
-    <CamcorderProfiles>
+    <CamcorderProfiles cameraId="0">
 
         <EncoderProfile quality="hd" fileFormat="mp4" duration="60">
             <Video codec="h264"
@@ -94,14 +94,63 @@
         
         <EncoderProfile quality="high" fileFormat="mp4" duration="60">
             <Video codec="m4v"
-                   bitRate="2000000"
+                   bitRate="6000000"
                    width="800"
                    height="480"
-                   frameRate="30" />
+                   frameRate="24" />
 
             <Audio codec="aac"
-                   bitRate="48000"
-                   sampleRate="22050"
+                   bitRate="96000"
+                   sampleRate="16000"
+                   channels="1" />
+        </EncoderProfile>
+
+        <EncoderProfile quality="low" fileFormat="3gp" duration="30">
+            <Video codec="h263"
+                   bitRate="256000"
+                   width="176"
+                   height="144"
+                   frameRate="15" />
+
+            <Audio codec="amrnb"
+                   bitRate="12200"
+                   sampleRate="8000"
+                   channels="1" />
+
+        </EncoderProfile>
+
+        <ImageEncoding quality="90" />
+        <ImageEncoding quality="80" />
+        <ImageEncoding quality="70" />
+        <ImageDecoding memCap="20000000" />
+
+    </CamcorderProfiles>
+	
+	<CamcorderProfiles cameraId="1">
+	
+        <EncoderProfile quality="hd" fileFormat="mp4" duration="60">
+            <Video codec="h264"
+                   bitRate="6000000"
+                   width="1280"
+                   height="720"
+                   frameRate="24" />
+
+            <Audio codec="aac"
+                    bitRate="96000"
+                    sampleRate="48000"
+                    channels="1" />
+        </EncoderProfile>
+        
+        <EncoderProfile quality="high" fileFormat="mp4" duration="60">
+            <Video codec="m4v"
+                   bitRate="6000000"
+                   width="800"
+                   height="480"
+                   frameRate="24" />
+
+            <Audio codec="aac"
+                   bitRate="96000"
+                   sampleRate="16000"
                    channels="1" />
         </EncoderProfile>
 
@@ -148,7 +197,7 @@
         minFrameRate="1" maxFrameRate="30" />
 
     <VideoEncoderCap name="m4v" enabled="true"
-        minBitRate="64000" maxBitRate="2000000"
+        minBitRate="64000" maxBitRate="6000000"
         minFrameWidth="176" maxFrameWidth="800"
         minFrameHeight="144" maxFrameHeight="480"
         minFrameRate="1" maxFrameRate="30" />
@@ -177,4 +226,4 @@
     -->
     <VideoDecoderCap name="wmv" enabled="false"/>
     <AudioDecoderCap name="wma" enabled="false"/>
-</MediaSettings>
+</MediaSettings>

proprietary-files.txt

@@ -5,7 +5,6 @@ etc/AudioBTID.csv
 etc/AdieHWCodecSetting.csv
 etc/firmware/BCM4329B1_002.002.023.0360.0362.hcd
 etc/firmware/BCM4329B1_002.002.023.0436.0439.hcd
-etc/firmware/BCM4329B1_002.002.023.0436.0439.hcd
 etc/firmware/BCM4329B1_002.002.023.0511.0538.hcd
 etc/firmware/bcm4329.hcd
 etc/firmware/htcleo.acdb

releasetools/squisher

@@ -80,6 +80,11 @@ mkdir $REPACK/ota
 cd $REPACK/ota
 printf "Unpacking $OTAPACKAGE..."
 unzip $QUIET $OTAPACKAGE
+
+echo
+printf "leo has limited diskspace so lets remove some unwanted stuff..."
+rm -rf $REPACK/ota/system/tts
+
 echo
 cd $REPACK/ota/system/framework
 $OPTICHARGER framework-res.apk

system.prop

@@ -36,7 +36,7 @@ ro.sf.lcd_density=240
 mobiledata.interfaces=rmnet0,rmnet1,rmnet2,ppp0
 
 # This is a high density device with more memory, so larger vm heaps for it.
-dalvik.vm.heapsize=32m
+dalvik.vm.heapsize=48m
 
 # leo have huge 250Mb unwritable system and small 50Mb cache .
 dalvik.vm.dexopt-data-only=1

vendorsetup.sh

@@ -20,5 +20,4 @@
 # In particular, you can add lunch options with the add_lunch_combo
 # function: add_lunch_combo generic-eng
 
-add_lunch_combo htc_leo-userdebug
-add_lunch_combo htc_leo-eng
+add_lunch_combo cyanogen_leo-eng