update touchscreen config to include kbd

prebuilt/htcleo-touchscreen.idc

@@ -26,26 +26,6 @@ touch.size.scale = 10
 touch.size.bias = 160
 touch.size.isSummed = 1
 
-# Touch Size
-touch.touchSize.calibration = pressure
-
-# Tool Size
-# Driver reports tool size as a linear width measurement summed over
-# all contact points.
-#
-# Raw width field measures approx. 1 unit per millimeter
-# of tool size on the surface where a raw width of 1 corresponds
-# to about 17mm of physical size.  Given that the display resolution
-# is 10px per mm we obtain a scale factor of 10 pixels / unit and
-# a bias of 160 pixels.  In addition, the raw width represents a
-# sum of all contact area so we note this fact in the calibration.
-touch.toolSize.calibration = linear
-touch.toolSize.linearScale = 10
-touch.toolSize.linearBias = 160
-touch.toolSize.isSummed = 1
-
-touch.filterTouchEvents = 1
-
 # Pressure
 # Driver reports signal strength as pressure.
 #
@@ -58,8 +38,16 @@ touch.filterTouchEvents = 1
 # a featherlight touch will be below 1.0 and a heavy or large touch
 # will be above 1.0.  We don't expect these values to be accurate.
 touch.pressure.calibration = amplitude
-touch.pressure.source = default
 touch.pressure.scale = 0.01
 
 # Orientation
-touch.orientation.calibration = none
+touch.orientation.calibration = none
+
+# Keyboard
+keyboard.layout = htcleo-keypad
+keyboard.characterMap = Virtual
+keyboard.orientationAware = 1
+keyboard.builtIn = 0
+
+device.internal = 1
+