Enable again wlan_loader

Since is needed to load wifi stuff, this is again in build

Change-Id: I31c5f561c4254b7de17f664326642ccca23a441a

BoardConfig.mk

@@ -21,13 +21,11 @@ TARGET_CPU_ABI := armeabi-v6j
 TARGET_CPU_ABI2 := armeabi
 
 TARGET_BOOTLOADER_BOARD_NAME := bahamas
-TARGET_OTA_ASSERT_DEVICE := click,tattoo
 
 TARGET_NO_BOOTLOADER := true
 TARGET_NO_RADIOIMAGE := true
 
 BOARD_LDPI_RECOVERY := true
-BOARD_HAS_JANKY_BACKBUFFER := true
 
 TARGET_PREBUILT_KERNEL := device/htc/click/custom/kernel
 
@@ -43,7 +41,7 @@ WIFI_FIRMWARE_LOADER        := "wlan_loader"
 
 TARGET_PROVIDES_INIT_RC := false
 
-BOARD_KERNEL_CMDLINE := no_console_suspend=1 console=null
+BOARD_KERNEL_CMDLINE := no_console_suspend=1
 BOARD_KERNEL_BASE := 0x02E00000
 BOARD_KERNEL_PAGESIZE := 2048
 

click.mk

@@ -85,9 +85,6 @@ $(call inherit-product, device/common/gps/gps_eu_supl.mk)
 $(call inherit-product, device/htc/common/common.mk)
 $(call inherit-product, build/target/product/full_base.mk)
 
-# Add goo.im support
-$(call inherit-product, device/htc/click/goo.mk)
-
 PRODUCT_NAME := htc_click
 PRODUCT_DEVICE := click
 

goo.mk

@@ -1,14 +0,0 @@
-#
-# Copyright (C) 2012 the arifali
-#
-# GooManager specific stuff
-#
-
-PRODUCT_PROPERTY_OVERRIDES += \
-        ro.goo.developerid=arifali \
-        ro.goo.rom=cm7clicknightly \
-        ro.goo.version=$(shell date +%s)
-
-# include goo manager
-#PRODUCT_COPY_FILES += \
-#       device/htc/click/prebuilt/GooManager.apk:system/app/GooManager.apk

init.bahamas.rc

@@ -20,9 +20,6 @@ on boot
     mkdir /data/misc/dhcp 0770 dhcp dhcp
     chown dhcp dhcp /data/misc/dhcp
 
-    # framebuffer permission for copybit
-    chmod 0666 /dev/graphics/fb0
-
     chown radio system /sys/module/gpio_event/parameters/phone_call_status
     chmod 0664 /sys/module/gpio_event/parameters/phone_call_status
 
@@ -77,6 +74,8 @@ on boot
     write /proc/sys/kernel/sched_latency_ns 5000000
     write /proc/sys/kernel/sched_wakeup_granularity_ns 100000
     write /proc/sys/kernel/sched_min_granularity_ns 100000
+    write /proc/sys/vm/dirty_background_bytes 1024000
+    write /proc/sys/vm/dirty_bytes 10240000
 
     # Assign TCP buffer thresholds to be ceiling value of technology maximums
     # Increased technology maximums should be reflected here.

libcamera/QualcommCameraHardware.cpp

@@ -97,7 +97,6 @@ struct preview_size_type {
 static preview_size_type preview_sizes[] = {
     { 480, 320 }, // HVGA
     { 432, 320 }, // 1.35-to-1, for photos. (Rounded up from 1.3333 to 1)
-    { 384, 288 }, // 4:3
     { 352, 288 }, // CIF
     { 336, 244 },
     { 320, 320 },
@@ -2015,9 +2014,7 @@ void QualcommCameraHardware::setZoom()
                 multiplier = getParm("picture-size", picturesize);
                 LOGV("Reducing picture quality; new multiplier: %d", multiplier);
             }
-            level = zoomsel * (iscamcorder ? (multiplier*5) / 6 : 5);
-            //Update the parameters so initRaw doesn't use the wrong size later
-            mParameters.getPictureSize(&mRawWidth, &mRawHeight);
+            level = zoomsel * (iscamcorder ? (multiplier*5)/6 : 5);
             LOGV("Level: %d, Multiplier: %d ZoomSel: %d",level,multiplier,zoomsel);
         }
     } else {

media_profiles.xml

@@ -81,23 +81,23 @@
 
         <EncoderProfile quality="high" fileFormat="3gp" duration="60">
             <Video codec="h263"
-                   bitRate="720000"
-                   width="384"
+                   bitRate="360000"
+                   width="352"
                    height="288"
-                   frameRate="24" />
+                   frameRate="20" />
 
             <Audio codec="aac"
                    bitRate="64000"
                    sampleRate="16000"
-                   channels="2" />
+                   channels="1" />
         </EncoderProfile>
 
         <EncoderProfile quality="low" fileFormat="3gp" duration="30">
             <Video codec="h263"
                    bitRate="192000"
-                   width="240"
-                   height="160"
-                   frameRate="20" />
+                   width="176"
+                   height="144"
+                   frameRate="30" />
 
             <Audio codec="amrnb"
                    bitRate="12200"
@@ -123,26 +123,26 @@
     -->
     <VideoEncoderCap name="h264" enabled="true"
         minBitRate="64000" maxBitRate="420000"
-        minFrameWidth="176" maxFrameWidth="384"
+        minFrameWidth="176" maxFrameWidth="352"
         minFrameHeight="144" maxFrameHeight="288"
         minFrameRate="1" maxFrameRate="30" />
 
     <VideoEncoderCap name="h263" enabled="true"
-        minBitRate="64000" maxBitRate="720000"
-        minFrameWidth="176" maxFrameWidth="384"
+        minBitRate="64000" maxBitRate="420000"
+        minFrameWidth="176" maxFrameWidth="352"
         minFrameHeight="144" maxFrameHeight="288"
         minFrameRate="1" maxFrameRate="30" />
 
     <VideoEncoderCap name="m4v" enabled="true"
         minBitRate="64000" maxBitRate="420000"
-        minFrameWidth="176" maxFrameWidth="384"
+        minFrameWidth="176" maxFrameWidth="352"
         minFrameHeight="144" maxFrameHeight="288"
         minFrameRate="1" maxFrameRate="30" />
 
     <AudioEncoderCap name="aac" enabled="true"
         minBitRate="8192" maxBitRate="96000"
         minSampleRate="8000" maxSampleRate="16000"
-        minChannels="1" maxChannels="2" />
+        minChannels="1" maxChannels="1" />
 
     <AudioEncoderCap name="amrwb" enabled="true"
         minBitRate="6600" maxBitRate="23050"

overlay/frameworks/base/core/res/res/values/config.xml

@@ -24,7 +24,7 @@
          alpha compositing functionality in hardware.  If set, the window
          manager will disable alpha trasformation in animations where not
          strictly needed. -->
-    <bool name="config_sf_limitedAlpha">false</bool>
+    <bool name="config_sf_limitedAlpha">true</bool>
 
     <!-- Flag indicating whether the surface flinger is inefficient
          at performing a blur.  Used by parts of the UI to turn off
@@ -65,6 +65,10 @@
     <item>"tiwlan\\d"</item>
     </string-array>
 
+    <!-- If this is true, the screen will fade off.
+         Setting it to false enables the electron beam -->
+    <bool name="config_animateScreenLights">false</bool>
+
     <!-- Enable the screen-off animation -->
     <bool name="config_enableScreenOffAnimation">false</bool>
 
@@ -80,6 +84,10 @@
     <!-- Component name of the service providing geocoder API support. -->
     <string name="config_geocodeProvider">com.google.android.location.GeocodeProvider</string>
 
+    <!-- Handle notifications differently if device only uses an amber/green
+    LED. This also needs a liblights module that enables them accordingly. -->
+    <bool name="config_amber_green_light">false</bool>
+
     <!-- Configure rotary bottom margin -->
     <integer name="config_rotaryMarginBottomDIP">0</integer>
 
@@ -90,5 +98,5 @@
     <integer name="config_ringBaselineBottomDIP">110</integer>
 
     <!-- Configure ring lockscreen center ring offset -->
-    <integer name="config_ringCenterOffsetDIP">18</integer>
+    <integer name="config_ringCenterOffsetDIP">14</integer>
 </resources>

overlay/packages/apps/Mms/res/xml/mms_config.xml

@@ -23,10 +23,10 @@
 
 <mms_config version="4">
     <!-- Maximum message size in bytes for a MMS message -->
-    <int name="maxMessageSize">307200</int>
+    <int name="maxMessageSize">0307200</int>
 
     <!-- Maximum height for an attached image -->
-    <int name="maxImageHeight">768</int>
+    <int name="maxImageHeight">0768</int>
 
     <!-- Maximum width for an attached image -->
     <int name="maxImageWidth">1024</int>

overlay/packages/apps/Phone/res/values/config.xml

@@ -14,23 +14,112 @@
      limitations under the License.
 -->
 
-<!-- Tattoo-specific phone app resources. -->
+<!-- Phone app resources that may need to be customized
+     for different hardware or product builds. -->
 <resources>
+    <!-- Flag indicating whether the Phone app should ignore
+         EVENT_SIM_NETWORK_LOCKED events from the Sim.  If true, this will
+         prevent the IccNetworkDepersonalizationPanel from being shown,
+         and effectively disable the "Sim network lock" feature. -->
+    <bool name="ignore_sim_network_locked_events">false</bool>
 
-    <!-- Enable the onscreen touch UI for all states of the in-call UI. -->
+    <!-- Flag indicating whether the Phone app should provide
+         a "Dismiss" button on the SIM network unlock screen.
+         The default value is true.
+         If set to false, there will be *no way* to dismiss the SIM
+         network unlock screen if you don't enter the correct unlock code.
+         (One important consequence: there will be no way to make an
+         Emergency Call if your SIM is network-locked and you don't know
+         the PIN.) -->
+    <bool name="sim_network_unlock_allow_dismiss">true</bool>
+
+    <!-- If true, enable the onscreen touch UI for incoming calls.
+         This feature is necessary for devices with no hard SEND/END keys,
+         and optional on all other devices. -->
     <bool name="allow_incoming_call_touch_ui">true</bool>
+
+    <!-- If true, enable the onscreen touch UI for regular "ongoing call"
+         states of the in-call UI.
+         In general, the touch UI is used for regular calls only on
+         devices with a proximity sensor.  (On other devices, we can't
+         have touchable UI onscreen during a call because of the risk of
+         false cheek touches.)
+         TODO: maybe this can be determined algorithmically based on
+         specific properties of the device, perhaps by detecting the
+         presence of a proximity sensor and/or hard SEND/END keys.  (If
+         so, we wouldn't need this flag at all.) -->
     <bool name="allow_in_call_touch_ui">true</bool>
 
-    <!-- This is a device without capacitive buttons, so enable the feature
-         where BACK rejects the current incoming call. -->
+    <!-- OTA configuration values, used when provisioning CDMA devices.
+         Following defaults values of zero means OTA UI is completely disabled.
+         These OTA UI can be enabled by setting config value to one in the product
+         specific overlay file -->
+
+    <!-- Determine whether we want to display the OTA activation screen, which
+         gives the user option to activate or cancel -->
+    <integer name="OtaShowActivationScreen">1</integer>
+    <!-- Determine whether we should show the "listen for instructions" screen after
+         successfully placing the OTA call -->
+    <integer name="OtaShowListeningScreen">0</integer>
+    <!-- The number of times we should show the activation screen/allow the provisioning
+         to fail before just showing an unsuccessful dialog -->
+    <integer name="OtaShowActivateFailTimes">0</integer>
+    <!-- Determine whether or not we should play the success/failure tone -->
+    <integer name="OtaPlaySuccessFailureTone">0</integer>
+
+    <!-- Flag indicating if the phone is a world phone -->
+    <bool name="world_phone">false</bool>
+
+    <!-- If true, enable vibration (haptic feedback) for key presses
+         in the EmergencyDialer activity. The pattern is set on a
+         per-platform basis using config_virtualKeyVibePattern.  To be
+         consistent with the regular Dialer, this value should agree
+         with the corresponding values from config.xml under
+         apps/Contacts. -->
+    <bool name="config_enable_dialer_key_vibration">true</bool>
+
+    <!-- Flag indicating if the voicemail notification option is enabled -->
+    <bool name="voicemail_notification_enabled">true</bool>
+
+    <!-- Flag indicating if the tty is enabled -->
+    <bool name="tty_enabled">false</bool>
+
+    <!-- Flag indicating if hac is enabled -->
+    <bool name="hac_enabled">false</bool>
+
+    <!-- Flag indicating if dtmf tone type is enabled -->
+    <bool name="dtmf_type_enabled">false</bool>
+
+    <!-- Flag indicating if auto retry is enabled -->
+    <bool name="auto_retry_enabled">false</bool>
+
+    <!-- Determine whether we want to play local DTMF tones in a call, or
+         just let the radio/BP handle playing of the tones. -->
+    <bool name="allow_local_dtmf_tones">true</bool>
+
+    <!-- While an incoming call is ringing, this flag specifies whether
+         the BACK key should reject the current call (just like the
+         ENDCALL button does.)
+         This was originally the default behavior for all platforms, but
+         it's a bad idea on devices where the BACK key is a capacitive
+         button (since it's too easy to press the key accidentally as you
+         pull the phone out of your pocket.)  So devices that *don't* want
+         this behavior should set this flag to false via the resource
+         overlay.  -->
     <bool name="allow_back_key_to_reject_incoming_call">true</bool>
 
-    <!-- Enable the onscreen "Dial" button in the emergency dialer. -->
+    <!-- If true, show an onscreen "Dial" button in the dialer.
+         In practice this is used on all platforms even the ones with hard SEND/END
+         keys, but for maximum flexibility it's controlled by a flag here
+         (which can be overridden on a per-product basis.) -->
     <bool name="config_show_onscreen_dial_button">true</bool>
 
-    <!-- This device uses libaudio which implements
-         AudioHardware::setMicMute(bool state) and AudioHardware::getMicMute(bool* state)
-         so microphone muting calls should be routed through the AudioManager API. -->
-    <bool name="send_mic_mute_to_AudioManager">true</bool>
+    <!-- Determine whether calls to mute the microphone in PhoneUtils
+         are routed through the android.media.AudioManager class (true) or through
+         the com.android.internal.telephony.Phone interface (false). -->
+    <bool name="send_mic_mute_to_AudioManager">false</bool>
+
+    <!-- Determines if device implements a noise suppression device for in call audio-->
+    <bool name="has_in_call_noise_suppression">false</bool>
 
 </resources>

system.prop

@@ -62,8 +62,6 @@ dalvik.vm.execution-mode=int:jit
 # Persist default parameters
 persist.sys.use_dithering=1
 persist.sys.purgeable_assets=0
-persist.sys.rotationanimation=false
-persist.sys.scrollingcache=2
 
 # VM heap size
 dalvik.vm.heapsize=24m
@@ -71,9 +69,6 @@ dalvik.vm.heapsize=24m
 # Enable compcache
 ro.compcache.default=18
 
-# Lock dirty_ratio to 20 when USB is mounted for improved transfer speed
-ro.vold.umsdirtyratio=20
-
 # Makes HOME ADW / OTHERS to be always in memoory
 pref_lock_home=1