ipmitool-xcat (1.8.18) unstable; urgency=low * Upgrade to 1.8.18 version -- Victor Hu Tue, May 30, 2017 14:41:01 -0400 ipmitool-xcat (1.8.17-1) unstable; urgency=low * Make ipmitool exit gracefully when receiving `INT`, `TERM` or `HUP` signal. * Close the intf(lanplus) session when the sol session at BMC side is closed. -- chenglch Mon, 31 Oct 2016 13:24:00 +0100 ipmitool-xcat (1.8.17-0) unstable; urgency=low * Upgrade to 1.8.17 version -- chenglch Thu, 29 Sep 2016 11:10:00 +0100 ipmitool-xcat (1.8.15-3) unstable; urgency=low * Handle HUP and TERM signal -- chenglch Wed, 10 Aug 2016 11:18:00 +0100 ipmitool-xcat (1.8.15-2) unstable; urgency=low * To close sol session after no more data get from server side -- zhaoertao Thu, 30 Jun 2016 13:58:00 +0100 ipmitool-xcat (1.8.15-1) unstable; urgency=low * Delete user prompt to upgrade firmware -- chenglch Wed, 4 Nov 2015 23:08:00 +0100 ipmitool-xcat (1.8.11-1) unstable; urgency=low * Changed to ipmitool-xcat -- Arif Ali Sat, 07 Apr 2012 23:08:00 +0100 version (1.8.11) unstable; urgency=low * Fix new GCC compilation issues in regards to Packing * Fix Tracker bug #1642710 - ipmi_kcs_drv being loaded/unloaded for 2.4 kernel instead of ipmi_si_drv driver module * New -y option added to allow specification of kg keys with non-printable characters * New -K option added to allow kgkey settings via environmental variable IPMI_KGKEY * Generic device support added for EEPROM with SDR Type 10h (gendev) * Fix to lan-bridging for a double-bridging crash and to fix an issue with bridging multiple concurrent requests and erroneous handling of raw Send Message * Lanplus fix for commands like 'sensor list' without the -t option causing wrong double bridged requests of a sensor is located on another satellite controller * Fix lan and lanplus request list entry removal bugs * Fix non-working issue when trying to send a bridge message with Cipher 3 * Change bridge message handling to reuse command ipmi_lan_poll_recv * Added PICMG 2.0 and 2.3 support * Fix PICMG (ATCA) extension verification and reversal of BCD encoded values for "major" and "minor" fields * Add IANA support for Pigeon Point * Add OEM SW/FW Record identification * Fix to include I2C and LUN addresses so sensors are correctly managed * Patch ID 1990560 to get readings from non-linear analog sensors * Add support for SOL payload status command * SOL set parameter range checking added * Fixed SOL activate options usage * Fixed crashes when parsing 'sol payload' and 'tsol' cmds (#216967) * Added retries to SOL keepalive * Fixed wrong mask values for Front Panel disable/enable status * Add support to access fru internal use area * Add support for new PICMG 3.0 R3.0 (March 24, 2008) to allow blocks of data within the FRU storage area to be write protected. * Fix node reporting in GUID; Tracker bug #2339675 * Fix watchdog use/action print strings * Fix endian bug in SDR add from file; Tracker bug #2075258 * Fix crash when dumping SDRs in a file and there's an error getting an SDR; improve algorithm for optimal packet size * Fix occasional SDR dump segfault; #1793076 * Allow ipmitool sel delete to accept hex list entry numbers * Fix SEL total space reporting. * Fix for garbage sensor threshold values reported when none returned. Tracker Bug #863748 * ipmievd change to Monitor %used in SEL buffer and log warnings when the buffer is 80% and 100% full -- Petter Reinholdtsen Wed, 25 Feb 2009 09:44:31 +0200 ipmitool (1.8.10) unstable; urgency=low * New upstream version. * Patch to allow Debian package builds from cvs. -- Petter Reinholdtsen Fri, 8 Aug 2008 09:44:31 +0200 ipmitool (1.8.7-2) unstable; urgency=low * Fix typo in init.d/ipmievd. (Closes: #361309) -- Petter Reinholdtsen Sat, 8 Apr 2006 06:44:31 +0200 ipmitool (1.8.7-1) unstable; urgency=low * New upstream version. - Dropped nuclear clause from the copyright. Updated debian/copyright to reflect this. - ipmievd now store pid in /var/run/ipmievd.pid. Adjust init.d script to use it. * Rename /etc/default/ipmievd variable IPMIEVD_OPTS is renamed to IPMIEVD_OPTIONS to stay compatible with upstream and other distributions. Add backwards compatibility code with a warning to the users of the old variable. -- Petter Reinholdtsen Sun, 26 Mar 2006 21:11:08 +0200 ipmitool (1.8.6-2) unstable; urgency=low * Add ia64 as an supported arch. (Closes: #355930) -- Petter Reinholdtsen Fri, 10 Mar 2006 23:34:50 +0100 ipmitool (1.8.6-1) unstable; urgency=low * New upstream version. - Avoid crashing when setting lan IP address. (Closes: #351205) * Avoid changing history by reverding upstream change to email addresses in debian/changelog. * Correct typo in control file: Suggest -> Suggests. Thanks to Philipp Matthias Hahn for the report. * Add init.d/ipmievd script. Based on script from Elmar Hoffmann, slightly modified to use lsb-base functions. Added dependency on lsb-base. (Closes: #345994) -- Petter Reinholdtsen Sun, 26 Feb 2006 10:31:14 +0100 ipmitool (1.8.2-2) unstable; urgency=low * Add build-dependency on 'libreadline5-dev | libreadline-dev' to make sure all archs get readline support. (Closes: #326341) * Add build-dependency on libssl-dev to enable SSL support on all archs. * Updated Standards-Version to 3.6.2.1. (No updates required) -- Petter Reinholdtsen Sat, 3 Sep 2005 19:18:51 +0200 ipmitool (1.8.2-1) unstable; urgency=low * New upstream release. - Fix FRU reading for large (>255 bytes) areas. - Overhaul to ipmievd to support SEL polling in addition to OpenIPMI. - Fix LAN parameter segfault when no Ciphers supported by BMC. (Closes: #306806) - Fix IPMIv2 support on Intel v2 BMCs (use -o intelplus). - Separate option parsing code from main ipmitool source file. - Add raw I2C support with IPMI Master Read-Write command. - Add support for new 'sdr elist' extended output format. - Add support for listing sensors by type with 'sdr type' command. - Add support for new 'sel elist' extended output format that cross-references events with sensors. - Add support for sending dynamically generated platform events based on existing sensor information. - New '-S' argument to read local SDR cache created with 'sdr dump'. - Updated manpage for ipmitool and ipmievd. (Closes: #306894) * Correct the upstream URL in debian/changelog to the current one. * Suggest package openipmi. (Closes: #305629) * Add debian/watch file to detect new source versions. -- Petter Reinholdtsen Sun, 5 Jun 2005 10:29:18 +0200 ipmitool (1.8.1-1) unstable; urgency=low * New upstream release. * Install ipmievd into /usr/sbin/. -- Petter Reinholdtsen Thu, 7 Apr 2005 01:18:44 +0200 ipmitool (1.8.0-1) unstable; urgency=low * Initial upload into Debian, based on the upstream build rules. (Closes: #299924) * Convert debian/changelog to UTF-8. * Change section from 'contrib' to 'utils'. * Build-depend on debhelper (>> 4.0.0) to match the rules file. * Set Standards-version to 3.6.1. * Make sure binary dependency is properly generated. * Add long description, copied from the project README. * Drop useless provides 'ipmitool', as the package is called 'ipmitool'. * Don't install the COPYING file, as the license text already is included in debian/copyright. * Remove unused parts of the rules file. * Correct clean target in rules file, to use 'distclean' and remove configure-stamp not bogus config-stamp. -- Petter Reinholdtsen Sun, 3 Apr 2005 20:52:02 +0200 ipmitool (1.8.0) unstable; urgency=low * Fix IPMIv2.0 issues * Fix chassis boot parameter support * Add support for linear sensors -- Duncan Laurie Wed, Mar 16 2005 17:08:12 -0700 ipmitool (1.7.1) unstable; urgency=low * Update bmc plugin to work with new Solaris bmc driver (new ioctl for interface detection and new STREAMS message-based interface). -- Seth Goldberg Mon, Mar 7 2005 18:03:00 -0800 ipmitool (1.7.0) unstable; urgency=low * Propogate errors correctly so exit status will be useful * More consistent display of errors including completion code text * Errors and debug is send to stderr now * New "sel get" command that will print details about SEL entry and corresponding SDR records as well as FRUs via entity association * Improved event generator, now supports reading events from text file * New "-o oemtype" option for specifying OEM boards exsting types are "supermicro" and "intelwv2" * New PEF subsystem * New "bmc" plugin for Solaris 10 x86 * Many bugfixes and contributed patches -- Duncan Laurie Fri, Jan 7 2005 19:58:22 -0700 ipmitool (1.6.2) unstable; urgency=low * Support for Supermicro BMC OEM authentication method -- Duncan Laurie Mon, 16 Nov 2004 08:20:01 -0700 ipmitool (1.6.1) unstable; urgency=low * Fix minor problem with LAN parameter setting -- Duncan Laurie Wed, 29 Sep 2004 11:19:17 -0700 ipmitool (1.6.0) unstable; urgency=low * Add a README * Add support for IPMIv2 and Serial-over-LAN from Newisys * Add Solaris x86 lipmi interface * Add support for building Solaris packages * Add support for building RPMs as non-root user * Fix segfault when doing "sel list" (from Matthew Braithwaite) * Fix "chassis identify" on some BMCs (from ebrower@sourceforge) * Add "bmc info" and related output (from ebrower@sourceforge) * new "shell" and "exec" commands * lots of other contributed patches -- Duncan Laurie Thu, 9 Sep 2004 21:39:37 -0700 ipmitool (1.5.9) unstable; urgency=low * Add ability to get a particular sensor by name * Add ability to set a particular sensor threshold * Add support for displaying V2 channel authentication levels * Add README for rrdtool scripts in contrib directory * Improve lan interface retry handling * Support prompting for password or reading from environment * Move chaninfo command into channel subcommand * Fix reservation ID handling when two sessions open to BMC * Fix reading of large FRU data * Add configure option for changing binary to ipmiadm for Solaris * Fix compile problem on Solaris 8 -- Duncan Laurie Sat, 27 Mar 2004 00:11:37 -0700 ipmitool (1.5.8) unstable; urgency=low * Enable static compilation of interfaces * Fix types to be 64-bit safe * Fix compilation problems on Solaris * Fix multiple big-endian problems for Solaris/SPARC * Fix channel access to save settings to NVRAM * Set channel privilege limit to ADMIN during "access on" * Enable gratuitous ARP in bmcautoconf.sh * Add support for Linux kernel panic messages in SEL output * Add support for type 3 SDR records -- Duncan Laurie Tue, 27 Jan 2004 16:23:25 -0700 ipmitool (1.5.7) unstable; urgency=low * add IPMIv1.5 eratta fixes * additions to FRU printing and FRU multirecords * better handling of SDR printing * contrib scripts for creating rrdtool graphs -- Duncan Laurie Mon, 5 Jan 2004 17:29:50 -0700 ipmitool (1.5.6) unstable; urgency=low * Fix SEL event decoding for generic events * Handle empty SEL gracefully when doing "sel list" * Fix sdr handling of sensors that do not return a reading * Fix for CSV display of sensor readings/units from Fredrik Öhrn -- Duncan Laurie Thu, 4 Dec 2003 14:47:19 -0700 ipmitool (1.5.5) unstable; urgency=low * Add -U option for setting LAN username * Fix -v usage for plugin interfaces -- Duncan Laurie Tue, 25 Nov 2003 15:10:48 -0700 ipmitool (1.5.4) unstable; urgency=low * Put interface plugin API into library * Fix ipmievd -- Duncan Laurie Fri, 14 Nov 2003 15:16:34 -0700 ipmitool (1.5.3) unstable; urgency=low * Add -g option to work with grizzly bmc -- Duncan Laurie Mon, 3 Nov 2003 18:04:07 -0700 ipmitool (1.5.2) unstable; urgency=low * add support for setting gratuitous arp interval -- Duncan Laurie Fri, 24 Oct 2003 11:00:00 -0700 ipmitool (1.5.1) unstable; urgency=low * better SEL support * fix display bug in SDR list -- Duncan Laurie Wed, 8 Oct 2003 17:28:51 -0700 ipmitool (1.5.0) unstable; urgency=low * more robust UDP packet handling * add Intel IMB driver support * use autoconf/automake/libtool -- Duncan Laurie Fri, 5 Sep 2003 11:57:32 -0700 ipmitool (1.2-1) unstable; urgency=low * New command line option parsing * More chassis commands supported -- Duncan Laurie Wed, 2 Apr 2003 17:44:17 -0700 ipmitool (1.1-1) unstable; urgency=low * Minor fixes. -- Duncan Laurie Tue, 1 Apr 2003 14:31:10 -0700 ipmitool (1.0-1) unstable; urgency=low * Initial Release. -- Duncan Laurie Sun, 30 Mar 2003 21:30:46 -0700