xCAT/xcat-core
2
0
Fork 0
mirror of https://github.com/xcat2/xcat-core.git synced 2025-10-24 16:05:41 +00:00
Code Issues Releases Wiki Activity
Files
83db9da9b1dba154a8ef7cc001059d3c0e0870f5
xcat-core/xCAT-server/share/xcat/ib/scripts/configCECs
wanghuaz 431626e3f1 use /bin/ksh instead of /usr/bin/ksh for RH6 
git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/trunk@6593 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd
2010-06-24 02:59:05 +00:00

744 lines
39 KiB
Bash
Raw Blame History

#!/bin/ksh
###########################################################################
#
# The configCECs script is written in ksh, and used to create a full
# system partition for each CECs Managed by the HMC. It will use ssh to
# login the HMC with the hscroot userid in order to rename the CECs based
# on a certain pattern specified through command line and create full
# partition for all the CECs.
# Command Syntax:
# configCECs -H hmc_list [-c cec_format] [-l lpar_format] [-p profile_format]
# [--frame_pad_len len_number] [--node_pad_len len_number]
# [--cage_pad_len len_number]
# [--allocate_type always_all | always_list | conditional]
# [--exclude_hw ]
# [-h]
#
# -H hmc_list
# Specifies a comma-separated list of HMC host names, IP addresses to configure CECs on.
# -c cec_format
# Specifies the naming format for CEC, the default format is f%Fn%N_SN%S.
# -l lpar_format
# Specifies the naming format for LPAR, the default format is f%Fn%N.
# -p profile_format
# Specifies the naming format for profile, the default format is the same with lpar_format.
# --frame_pad_len len_number
# Specifies the number of digits used for the frame numbers, it will be zero filled if
# needed. The default value is no padding.
# --node_pad_len len_number
# Specifies the number of digits used for the node numbers, it will be zero filled if
# needed. The default value is no padding.
# --cage_pad_len len_number
# Specifies the number of digits used for the cage numbers, it will be zero filled if
# needed. The default value is no padding.
# --allocate_type
# Specifies the allocation method that is used to allocate resources to full system
# partition. The supported allocation methods are always_all, always_list and conditional.
# The default method is always_all. always_all indicates to always use the 'all resources'
# LPAR flag; always_list indicates to always explicitly list the devices in the LPAR; and
# conditional indicates to use the 'all resources' LPAR flag if not --exclude_hw is found,
# otherwise use an explicit list for the hardware.
# --exclude_hw
# Specifies a comma-separated list of hardware names or 'device id's that do not need to
# assign. The supported hardware names are RIO and 10G, RIO indicates Galaxy 1 HCA used
# for RIO connection in IH nodes; 10G indicates 2-port 10G integrated adapter in IH nodes.
# It can only be used with --allocate_type is always_list or conditional.
# -h Display usage information.
###########################################################################
###########################################################################
# #
# Setup default values for the script's variables. Some of these might #
# be overwritten by the commmand line arguments. #
# #
###########################################################################
CEC_FILE="/tmp/Rename_cecs"
LPAR_FILE="/tmp/Build_lpars"
CECFORMAT="f%Fn%N_SN%S"
LPARFORMAT="f%Fn%N"
PROFFORMAT=""
NODE_PAD_LENGTH=0 # A value of '0' means no padding
FRAME_PAD_LENGTH=0 # A value of '0' means no padding
CAGE_PAD_LENGTH=0 # A value of '0' means no padding
ALLOCATE_TYPE="always_all"
COMM_LPAR_INFO_AR="lpar_id=1,lpar_env=aixlinux,all_resources=1,boot_mode=norm,conn_monitoring=0" #For "all resources"
COMM_LPAR_INFO_LS="lpar_id=1,lpar_env=aixlinux,boot_mode=norm,conn_monitoring=0,proc_mode=ded,sharing_mode=keep_idle_procs"
NEW_LPAR_ID='1'
FULLPATH='NO'
NEWLINE='
'
HAVE_PROCESSED_CAGE=""
###########################################################################
# #
# usage for configCECs #
# #
###########################################################################
usage()
{
echo "Usage: configCECs -H hmc_list [-c cec_format] [-l lpar_format] [-p profile_format]
[--frame_pad_len len_number] [--node_pad_len len_number]
[--cage_pad_len len_number]
[--allocate_type always_all | always_list | conditional]
[--exclude_hw ]
[-h]
-H hmc_list
Specifies a comma-separated list of HMC host names, IP addresses to configure CECs on.
-c cec_format
Specifies the naming format for CEC, the default format is f%Fn%N_SN%S.
-l lpar_format
Specifies the naming format for LPAR, the default format is f%Fn%N.
-p profile_format
Specifies the naming format for profile, the default format is the same with lpar_format.
--frame_pad_len len_number
Specifies the number of digits used for the frame numbers, it will be zero filled if
needed. The default value is no padding.
--node_pad_len len_number
Specifies the number of digits used for the node numbers, it will be zero filled if
needed. The default value is no padding.
--cage_pad_len len_number
Specifies the number of digits used for the cage numbers, it will be zero filled if
needed. The default value is no padding.
--allocate_type
Specifies the allocation method that is used to allocate resources to full system
partition. The supported allocation methods are always_all, always_list and conditional.
The default method is always_all. always_all indicates to always use the 'all resources'
LPAR flag; always_list indicates to always explicitly list the devices in the LPAR; and
conditional indicates to use the 'all resources' LPAR flag if not --exclude_hw is found,
otherwise use an explicit list for the hardware.
--exclude_hw
Specifies a comma-separated list of hardware names or 'device id's that do not need to
assign. The supported hardware names are RIO and 10G, RIO indicates Galaxy 1 HCA used
for RIO connection in IH nodes; 10G indicates 2-port 10G integrated adapter in IH nodes.
It can only be used with --allocate_type is always_list or conditional.
-h Display usage information."
}
############################################################################
# #
# List all resources and exclude the resources indicated by '--exclude_hw' #
# #
############################################################################
lsres()
{
EXCLUDE_HW=`echo $EXCLUDE_HW | sed "s/,/\|/g"`
###########################################################
# #
# Get the details of any HCAs in the CEC while skipping #
# the Galaxy 1 adapter for the RIO (adapter_id of #
# 230015ff). When allocate a HCA, a GUID is needed. First #
# we try to extract this GUID from unassigned_guids #
# attibute. If the unassigned_guids is null, we will try #
# to extract this GUID from assigned_guids attibute. If #
# this two attribute are both null, an error message will #
# will be printed to indicate this device can be #
# allocated. #
# #
###########################################################
HCA_STRING=""
HCA_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r hca --level sys -F adapter_id:unassigned_guids:assigned_guids -m $CEC_NAME"
TMP_HCA_LIST=`$HCA_LIST_CMD`
SAVEIFS="$IFS"
IFS="$NEWLINE"
set -A HCA_LIST $TMP_HCA_LIST
IFS="$SAVEIFS"
H_INDEX=0
if [[ $HCA_LIST != "No results were found." ]]; then
while (($H_INDEX < ${#HCA_LIST[*]})); do
ADAPTER_ID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f1`
UNASSIGNED_GUID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f2`
ASSIGNED_GUID=`echo ${HCA_LIST[$H_INDEX]} | cut -d ':' -f3`
IS_EXCLUDED=`echo "$EXCLUDE_HW" | grep -q "$ADAPTER_ID" && echo yes || echo no`
if [[ $IS_EXCLUDED == "yes" ]]; then
((H_INDEX=$H_INDEX+1))
continue
fi
if [[ "$UNASSIGNED_GUID" != "" && "$UNASSIGNED_GUID" != "none" ]]; then
GUID=`echo $UNASSIGNED_GUID | cut -d ',' -f1`
else
if [[ "$ASSIGNED_GUID" != "" && "$ASSIGNED_GUID" != "none" ]]; then
GUID=`echo $ASSIGNED_GUID | cut -d ',' -f1`
else
echo " ERROR: The device $ADAPTER_ID could not be allocated."
((H_INDEX=$H_INDEX+1))
continue
fi
fi
if [[ $HCA_STRING == "" ]]; then
HCA_STRING=$ADAPTER_ID'/'$GUID'/4'
else
HCA_STRING=${HCA_STRING}','$ADAPTER_ID'/'$GUID'/4'
fi
((H_INDEX=$H_INDEX+1))
done
if [[ "${HCA_STRING}" != '' ]]; then
HCA_STRING=',\\\\\"hca_adapters='${HCA_STRING}'\\\\\"'
fi
fi
###########################################################
# #
# Get the location of all the I/O slots. #
# #
###########################################################
IO_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r io --rsubtype slot -F drc_index -m $CEC_NAME"
if [[ $EXCLUDE_HW != '' ]]; then
IO_LIST_CMD=${IO_LIST_CMD}" | egrep -v \"$EXCLUDE_HW\""
fi
set -A IO_LIST `$IO_LIST_CMD`
I_INDEX=0
if [[ $IO_LIST != "No" ]]; then
while (($I_INDEX < ${#IO_LIST[*]})); do
if [[ $I_INDEX == "0" ]]; then
IO_STRING=${IO_LIST[$I_INDEX]}'//0'
else
IO_STRING=${IO_STRING}','${IO_LIST[$I_INDEX]}'//0'
fi
((I_INDEX=$I_INDEX+1))
done
if [[ "${IO_STRING}" != '' ]]; then
IO_STRING=',\\\\\"io_slots='${IO_STRING}'\\\\\"'
fi
fi
###########################################################
# #
# Get the info on the HEAs in the CEC. #
# #
###########################################################
HEA_LIST_CMD="ssh hscroot@$HMC $LSHWRES -r hea --rsubtype phys --level port -F adapter_id/port_group/phys_port_id/log_port_ids -m $CEC_NAME"
set -A HEA_LIST `$HEA_LIST_CMD`
IS_EXCLUDED=`echo "$EXCLUDE_HW" | grep -q "2300000c" && echo yes || echo no`
if [[ $HEA_LIST != "No" ]]; then
if [[ ${#HEA_LIST[*]} = '4' || $IS_EXCLUDED == "yes" ]]; then
HEA_STRING='23000014/2/0/1/,23000014/2/1/2/,23000014/1/0/1/,23000014/1/1/2/'
else
HEA_STRING='23000014/2/0/1/,23000014/2/1/2/,23000014/1/0/1/,23000014/1/1/2/,2300000c/2/0/1/,2300000c/1/0/1/'
fi
HEA_STRING=',\\\\\"lhea_logical_ports='${HEA_STRING}'\\\\\"'
fi
###########################################################
# #
# Get the maximum installed memory. #
# #
###########################################################
MAX_MEM=`ssh hscroot@$HMC $LSHWRES -r mem --level sys -F installed_sys_mem -m $CEC_NAME`
MEM_STRING=',min_mem=4096,desired_mem='$MAX_MEM',max_mem='$MAX_MEM
###########################################################
# #
# Get the maximum installed CPUs. #
# #
###########################################################
MAX_CPU=`ssh hscroot@$HMC $LSHWRES -r proc --level sys -F installed_sys_proc_units -m $CEC_NAME`
MAX_CPU=`echo $MAX_CPU | sed -e 's/\.0$//'`
CPU_STRING=',min_procs=1,desired_procs='$MAX_CPU',max_procs='$MAX_CPU
}
###########################################################################
# #
# Parse/validate the commmand line arguments. #
# #
###########################################################################
OS=`uname`
if [[ "$OS" == "AIX" ]]; then
#The getopt on AIX doesn't support long options
ALLARGS=$*
ALLARGS=`echo $ALLARGS | sed -e 's/ --frame_pad_len/ -F/'`
ALLARGS=`echo $ALLARGS | sed -e 's/ --node_pad_len/ -N/'`
ALLARGS=`echo $ALLARGS | sed -e 's/ --cage_pad_len/ -G/'`
ALLARGS=`echo $ALLARGS | sed -e 's/ --allocate_type/ -A/'`
ALLARGS=`echo $ALLARGS | sed -e 's/ --exclude_hw/ -E/'`
echo "$ALLARGS" | grep " --" 2>&1 >/dev/null
if [ $? -eq 0 ]; then
strerr="Invalid options"
echo "$strerr" >&2
usage
exit 1
fi
args=`getopt H:c:l:p:hF:N:G:A:E: $ALLARGS 2>&1`
if [ $? -gt 0 ]; then
strerr="Invalid options"
echo "$strerr" >&2
usage
exit 1
fi
args=`echo $args | sed -e 's/ -F/ --frame_pad_len/'`
args=`echo $args | sed -e 's/ -N/ --node_pad_len/'`
args=`echo $args | sed -e 's/ -G/ --cage_pad_len/'`
args=`echo $args | sed -e 's/ -A/ --allocate_type/'`
args=`echo $args | sed -e 's/ -E/ --exclude_hw/'`
elif [[ "$OS" == "Linux" ]]; then
args=`getopt -u -l frame_pad_len:,node_pad_len:,cage_pad_len:,allocate_type:,exclude_hw: H:c:l:p:h $*`
if [ $? -gt 0 ]; then
strerr="Invalid options"
echo "$strerr" >&2
usage
exit 1
fi
else
echo "The system $OS is not supported."
exit 1
fi
set -- $args
for i in $args; do
case $i in
-H)
shift;
HMC_LIST=$1;
shift;;
-c)
shift;
CECFORMAT=$1;
shift;;
-l)
shift;
LPARFORMAT=$1;
shift;;
-p)
shift;
PROFFORMAT=$1;
shift;;
--frame_pad_len)
shift;
FRAME_PAD_LENGTH=$1;
if [[ `echo "$FRAME_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then
echo "The parameter of --frame_pad_len should be an integer."
usage
exit 1
fi
typeset -RZ${FRAME_PAD_LENGTH} F_NUM;
shift
;;
--node_pad_len)
shift;
NODE_PAD_LENGTH=$1;
if [[ `echo "$NODE_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then
echo "The parameter of --node_pad_len should be an integer."
usage
exit 1
fi
typeset -RZ${NODE_PAD_LENGTH} N_NUM;
shift;;
--cage_pad_len)
shift;
CAGE_PAD_LENGTH=$1;
if [[ `echo "$CAGE_PAD_LENGTH" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then
echo "The parameter of --cage_pad_len should be an integer."
usage
exit 1
fi
typeset -RZ${CAGE_PAD_LENGTH} CAGE_NUM;
shift;;
--allocate_type)
shift;
ALLOCATE_TYPE=$1;
shift;;
--exclude_hw)
shift;
EXCLUDE_HW=$1;
shift;;
-h)
shift
usage
exit 0
;;
esac
done
if [[ "$HMC_LIST" == '' ]]; then
echo "There is no HMC specified. Please use -H to specify HMC."
usage
exit 1
fi
if [[ "$ALLOCATE_TYPE" != "always_all" ]] && [[ "$ALLOCATE_TYPE" != "always_list" ]] && [[ "$ALLOCATE_TYPE" != "conditional" ]]; then
echo "The parameter of --allocate_type is incorrect."
usage
exit 1
fi
if [[ "$ALLOCATE_TYPE" == "always_all" ]] && [[ "$EXCLUDE_HW" != '' ]]; then
echo "The flag --exclude_hw can only be used with --allocate_type is always_list or conditional."
usage
exit 1
fi
if [[ "$ALLOCATE_TYPE" == "conditional" ]] && [[ "$EXCLUDE_HW" != '' ]]; then
ALLOCATE_TYPE="always_list"
fi
if [[ "$ALLOCATE_TYPE" == "conditional" ]] && [[ "$EXCLUDE_HW" == '' ]]; then
ALLOCATE_TYPE="always_all"
fi
if [[ "$EXCLUDE_HW" != '' ]]; then
EXCLUDE_HW=`echo $EXCLUDE_HW | awk -F, '{ for (i=1;i<=NF;i++){ if($i=="RIO") $i="230015ff"; if($i=="10G") $i="2300000c"; } print $0 }'`
EXCLUDE_HW=`echo $EXCLUDE_HW | sed "s/ /,/g"`
fi
###########################################################################
# #
# Remove any old output files from previous runs of this script. #
# #
###########################################################################
rm -r $CEC_FILE >/dev/null 2>&1
rm -r $LPAR_FILE >/dev/null 2>&1
###########################################################################
# #
# Add the full pathname to the HMC commands if needed. #
# #
###########################################################################
if [[ "$FULLPATH" == "YES" ]]; then
HMCPATH='/opt/hsc/bin/'
else
HMCPATH=''
fi
LSSYSCFG=${HMCPATH}'lssyscfg'
MKSYSCFG=${HMCPATH}'mksyscfg'
CHSYSCFG=${HMCPATH}'chsyscfg'
RMSYSCFG=${HMCPATH}'rmsyscfg'
LSHWRES=${HMCPATH}'lshwres'
###########################################################################
# #
# Main loop: For the given HMC ($HMC) list all it's frames. For each #
# frame display the contents of it's cages to find it's CECs. Then for #
# each CEC build the HMC commands to name the CEC and build the LPAR. #
# The HMC commands are written to the two output files ($CEC_FILE and #
# $LPAR_FILE). #
# #
###########################################################################
HMC_LIST=`echo $HMC_LIST | sed "s/,/ /g"`
for HMC in $HMC_LIST; do
echo "Checking HMC $HMC......"
SAVEIFS="$IFS"
IFS="$NEWLINE"
set -A ALLFRAMES `ssh hscroot@$HMC $LSSYSCFG -r frame -F name,frame_num,serial_num,state`
IFS="$SAVEIFS"
if [[ ${#ALLFRAMES[*]} == "0" ]]; then
echo 'ERROR: NO FRAMES WERE FOUND ON HMC' "$HMC"
continue
fi
F_INDEX=0
while (($F_INDEX < ${#ALLFRAMES[*]})); do
SAVEIFS="$IFS"
IFS=','
set -A FRAMELINE ${ALLFRAMES[$F_INDEX]}
IFS="$SAVEIFS"
F_NAME="${FRAMELINE[0]}"
F_NUM="${FRAMELINE[1]}"
F_SN="${FRAMELINE[2]}"
F_STATE="${FRAMELINE[3]}"
###################################################################
# #
# Check if the frame number is invalid (0 or non-numeric). #
# #
###################################################################
if [[ "$F_NAME" == "No results were found." ]]; then
echo 'ERROR: NO FRAMES WERE FOUND ON HMC' "$HMC"
break
fi
if [[ "$F_NUM" == "0" || `echo "$F_NUM" | grep -sqE ^[0-9]+$ ;echo $?` != "0" ]]; then
echo 'ERROR: Invalid Frame number for frame' "$F_NAME"":" "$F_NUM"
((F_INDEX=$F_INDEX+1))
continue
fi
###################################################################
# #
# Check if at least one BPA is in the 'Standby' state. #
# #
###################################################################
if [[ `echo $F_STATE | grep -sq Standby ; echo $?` != "0" ]]; then
echo 'ERROR: Frame' "$F_NAME" 'is in incorrect state -' $F_STATE
((F_INDEX=$F_INDEX+1))
continue
fi
###################################################################
# #
# List the contents of each cage in the current frame using the #
# 'lssyscfg -r cage' command and loop through each one to find the#
# CECs. #
# #
###################################################################
N_NUM=0
SAVEIFS="$IFS"
IFS="$NEWLINE"
set -A ALLCAGES `ssh hscroot@$HMC $LSSYSCFG -r cage -e "$F_NAME" -F cage_num,contents,type_model_serial_num,loc_code,owner | sort -n`
IFS="$SAVEIFS"
CAGE_INDEX=0
while (($CAGE_INDEX < ${#ALLCAGES[*]})); do
SAVEIFS="$IFS"
IFS=','
set -A CAGELINE ${ALLCAGES[$CAGE_INDEX]}
IFS="$SAVEIFS"
CAGE_NUM="${CAGELINE[0]}"
CAGE_CONTENTS="${CAGELINE[1]}"
CAGE_TYPE_MODEL_SN="${CAGELINE[2]}"
CAGE_LOC_CODE="${CAGELINE[3]}"
CAGE_OWNER="${CAGELINE[4]}"
if [[ "$CAGE_NUM" == "No results were found." ]]; then
echo 'ERROR: NO CAGES WERE FOUND ON FRAME' "$F_NAME"
break
fi
case $CAGE_CONTENTS in
io) ;; ## Ignore RIO drawer
48) ;; ## Ignore Federation switch board
sys)
###########################################################
# #
# For each CEC found validate that the frame was able to #
# read it's MTMS correctly. The MTMS is the only common #
# piece of data between the 'lssyscfg -r cage' and #
# 'lssyscfg -r sys' commands. So, if the MTMS is invalid #
# skip over this CEC since will not be able to find it in #
# the 'lssyscfg -r sys' command output. The MTMS must be #
# split in 2 since 'lssyscfg -r sys' uses different fields#
# for the Model/Type and the Serial Number. #
# #
###########################################################
echo "Frame $F_NUM Cage $CAGE_NUM contains CEC $CAGE_TYPE_MODEL_SN"
N_NUM=$((${N_NUM} + 1))
if [[ "$CAGE_TYPE_MODEL_SN" == "No-TMS*Data!!!" ]]; then
echo " ERROR: Bad Type-Model-SN data:" "$CAGE_TYPE_MODEL_SN"
else
CAGE_TYPE_MODEL=`echo $CAGE_TYPE_MODEL_SN |cut -d '*' -f1`
CAGE_SN=`echo $CAGE_TYPE_MODEL_SN | cut -d '*' -f2`
for PREVCAGE in $HAVE_PROCESSED_CAGE; do
if [[ "$PREVCAGE" == "${CAGE_TYPE_MODEL}:${CAGE_SN}" ]]; then
PROCESSED=1
break
fi
PROCESSED=0
done
if [[ $PROCESSED == 1 ]]; then
echo " ERROR: ${CAGE_TYPE_MODEL}:${CAGE_SN} has already been processed."
((CAGE_INDEX=$CAGE_INDEX+1))
continue
fi
HAVE_PROCESSED_CAGE="${HAVE_PROCESSED_CAGE}${CAGE_TYPE_MODEL}:${CAGE_SN} "
#######################################################
# #
# List all the CECs on this HMC and grep for the MTMS #
# that was found for the CEC in this cage. If it is #
# not found or not an IH p5 then skip over this CEC. #
# #
#######################################################
CEC_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r sys -F name:state:power_off_policy:service_lpar_id:type_model:serial_num | grep "${CAGE_TYPE_MODEL}:${CAGE_SN}$"`
SAVE_RC=$?
if [[ "$SAVE_RC" != "0" ]]; then
echo " ERROR: Could not find System $CAGE_TYPE_MODEL $CAGE_SN on this HMC"
else
###################################################
# #
# Save the detail data of this CEC. #
# #
###################################################
CEC_NAME=`echo "$CEC_ENTRY" | cut -d ':' -f1`
CEC_STATE=`echo "$CEC_ENTRY" | cut -d ':' -f2`
CEC_POWER_POLICY=`echo "$CEC_ENTRY" | cut -d ':' -f3`
CEC_SERV_LPAR_ID=`echo "$CEC_ENTRY" | cut -d ':' -f4`
CEC_TYPE_MODEL=`echo "$CEC_ENTRY" | cut -d ':' -f5`
CEC_SN=`echo "$CEC_ENTRY" | cut -d ':' -f6`
###################################################
# #
# Format the new CEC name. #
# #
###################################################
CEC_NEW_NAME=''
PERCENT='no'
for i in `echo $CECFORMAT | sed -e 's/./& /g'`; do
if [[ $i = '%' && $PERCENT = 'no' ]]; then
PERCENT='yes'
else
if [[ $PERCENT = 'yes' ]]; then
case $i in
F) CEC_NEW_NAME=${CEC_NEW_NAME}${F_NUM} ;;
N) CEC_NEW_NAME=${CEC_NEW_NAME}${N_NUM} ;;
S) CEC_NEW_NAME=${CEC_NEW_NAME}${CEC_SN} ;;
C) CEC_NEW_NAME=${CEC_NEW_NAME}${CAGE_NUM} ;;
%) CEC_NEW_NAME=${CEC_NEW_NAME}${i} ;;
*) echo "Ignoring Invalid character "${i}" after a '%'." ;;
esac
PERCENT='no'
else
CEC_NEW_NAME=${CEC_NEW_NAME}${i}
fi
fi
done
###################################################
# #
# If the current CEC name needs to be changed then#
# build the 'chsyscfg' command and append it to #
# the file.
# #
###################################################
if [[ "$CEC_NAME" == "$CEC_NEW_NAME" ]]; then
echo " INFO: CEC NAME ($CEC_NAME) IS CORRECT."
else
echo " CHANGE: OLD CEC NAME:" "$CEC_NAME""." "NEW CEC NAME:" "$CEC_NEW_NAME""."
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NAME -i \"new_name=$CEC_NEW_NAME\"" >> $CEC_FILE
fi
###################################################
# #
# Check if the CEC is powered up. If it isn't we #
# have to skip over it since it needs to be up to #
# do anything else other then changing the CEC #
# name. #
# #
###################################################
if [[ "$CEC_STATE" == "Standby" || "$CEC_STATE" == "Operating" ]]; then
###############################################
# #
# Make sure the CEC power off policy is set to#
# 1. This prevents the CEC from being powered #
# off when the last LPAR is shutdown. #
# #
###############################################
if [[ "$CEC_POWER_POLICY" == "1" ]]; then
echo " INFO: CEC POWER OFF POLICY IS SET OK ($CEC_POWER_POLICY)."
else
echo " CHANGE: CEC POWER OFF POLICY IS SET WRONG ($CEC_POWER_POLICY)."
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NAME -i \"power_off_policy=1\"" >> $CEC_FILE
fi
###############################################
# #
# Format the new LPAR name. #
# #
###############################################
LPAR_NAME=''
PERCENT='no'
for i in `echo $LPARFORMAT | sed -e 's/./& /g'`; do
if [[ $i = '%' && $PERCENT = 'no' ]]; then
PERCENT='yes'
else
if [[ $PERCENT = 'yes' ]]; then
case $i in
F) LPAR_NAME=${LPAR_NAME}${F_NUM} ;;
N) LPAR_NAME=${LPAR_NAME}${N_NUM} ;;
S) LPAR_NAME=${LPAR_NAME}${CEC_SN} ;;
C) LPAR_NAME=${LPAR_NAME}${CAGE_NUM} ;;
%) LPAR_NAME=${LPAR_NAME}${i} ;;
*) echo "Ignoring Invalid character "${i}" after a '%'." ;;
esac
PERCENT='no'
else
LPAR_NAME=${LPAR_NAME}${i}
fi
fi
done
###############################################
# #
# Format the new Profile name. #
# #
###############################################
if [[ "$PROFFORMAT" == '' ]]; then
PROF_NAME=$LPAR_NAME
else
PROF_NAME=''
PERCENT='no'
for i in `echo $PROFFORMAT | sed -e 's/./& /g'`; do
if [[ $i = '%' && $PERCENT = 'no' ]]; then
PERCENT='yes'
else
if [[ $PERCENT = 'yes' ]]; then
case $i in
F) PROF_NAME=${PROF_NAME}${F_NUM} ;;
N) PROF_NAME=${PROF_NAME}${N_NUM} ;;
S) PROF_NAME=${PROF_NAME}${CEC_SN} ;;
C) PROF_NAME=${PROF_NAME}${CAGE_NUM} ;;
%) PROF_NAME=${PROF_NAME}${i} ;;
*) echo "Ignoring Invalid character "${i}" after a '%'." ;;
esac
PERCENT='no'
else
PROF_NAME=${PROF_NAME}${i}
fi
fi
done
fi
###############################################
# #
# Check if an LPAR with this name already #
# exists on this CEC. #
# #
###############################################
LPAR_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r lpar -m $CEC_NAME -F name:lpar_id:state --filter "lpar_names=$LPAR_NAME" `
LPAR_ENTRY_RC="$?"
if [[ "$LPAR_ENTRY_RC" == "0" ]]; then
###########################################
# #
# An LPAR with the this name exists. Now #
# check if the LPAR ID and the profile are#
# also correct. #
# #
###########################################
LPAR_ID=`echo "$LPAR_ENTRY" |cut -d ':' -f2`
LPAR_STATE=`echo "$LPAR_ENTRY" |cut -d ':' -f3`
if [[ "$LPAR_ID" == "$NEW_LPAR_ID" ]]; then
echo " INFO: LPAR $LPAR_NAME IS ALREADY CONFIGURED AS ID 1"
if [[ "$CEC_SERV_LPAR_ID" == "$NEW_LPAR_ID" ]]; then
echo " INFO: SERVICE LPAR ID IS SET OK ($CEC_SERV_LPAR_ID)."
else
echo " CHANGE: SERVICE LPAR ID IS SET WRONG ($CEC_SERV_LPAR_ID)."
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $CEC_FILE
fi
else
echo " ERROR: LPAR $LPAR_NAME IS CONFIGURED AS ID $LPAR_ID"
fi
else
###########################################
# #
# There is no existing LPAR with the #
# requested name. #
# Now verify there is no existing LPAR #
# with the requested LPAR ID#. #
# #
###########################################
LPAR_ENTRY=`ssh hscroot@$HMC $LSSYSCFG -r lpar -m $CEC_NAME -F name:lpar_id:state --filter "lpar_ids=$NEW_LPAR_ID" `
LPAR_ENTRY_RC="$?"
LPAR_INFO=''
if [[ "$ALLOCATE_TYPE" == "always_all" ]]; then
LPAR_INFO=${COMM_LPAR_INFO_AR}
else
lsres
LPAR_INFO=${COMM_LPAR_INFO_LS}${CPU_STRING}${MEM_STRING}${IO_STRING}${HEA_STRING}${HCA_STRING}
fi
if [[ "$LPAR_ENTRY_RC" == "0" ]]; then
#######################################
# #
# An existing LPAR with the requested #
# LPAR ID# (but different LPAR name) #
# was found. #
# #
#######################################
echo " CHANGE: REMOVE LPAR ID $NEW_LPAR_ID"
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=none\"" >> $LPAR_FILE
echo "ssh hscroot@$HMC $RMSYSCFG -r lpar -m $CEC_NEW_NAME --id $NEW_LPAR_ID" >> $LPAR_FILE
CONFIG_DATA="name=${LPAR_NAME},profile_name=${PROF_NAME},${LPAR_INFO}"
echo " CHANGE: CREATE LPAR $LPAR_NAME as LPAR ID 1"
echo "ssh hscroot@$HMC $MKSYSCFG -r lpar -m $CEC_NEW_NAME -i \"$CONFIG_DATA\"" >> $LPAR_FILE
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $LPAR_FILE
else
CONFIG_DATA="name=${LPAR_NAME},profile_name=${PROF_NAME},${LPAR_INFO}"
echo " CHANGE: CREATE LPAR $LPAR_NAME as LPAR ID 1"
echo "ssh hscroot@$HMC $MKSYSCFG -r lpar -m $CEC_NEW_NAME -i \"$CONFIG_DATA\"" >> $LPAR_FILE
echo "ssh hscroot@$HMC $CHSYSCFG -r sys -m $CEC_NEW_NAME -i \"service_lpar_id=1\"" >> $LPAR_FILE
fi
fi
else
echo " ERROR: CEC NOT POWERED UP. STATE IS: $CEC_STATE"
fi
fi
fi ;;
none) ;; ## Ignore empty cage in the frame
*) echo " ERROR: Unknown device in cage" $CAGE_NUM ;;
esac
((CAGE_INDEX=$CAGE_INDEX+1))
done
((F_INDEX=$F_INDEX+1))
done
done
chmod u+x $CEC_FILE >/dev/null 2>&1
chmod u+x $LPAR_FILE >/dev/null 2>&1
Reference in New Issue View Git Blame Copy Permalink