package xCAT_plugin::slpdiscover;
use strict;
use xCAT::SvrUtils qw/sendmsg/;
use xCAT::SLP;
use xCAT::NetworkUtils;
use xCAT::SSHInteract;
use xCAT::IMMUtils;
use xCAT::MacMap;
use xCAT_plugin::bmcconfig;
my $defaultbladeuser;
my $defaultbladepass;
my $currentbladepass;
my $currentbladeuser;
my $mpahash;

sub handled_commands {
    return {
        slpdiscover => "slpdiscover",
    };
}

my $callback;
my $docmd;
my %doneaddrs;
my %ip4neigh;
my %ip6neigh;
my %flexchassismap;
my %flexchassisuuid;
my %nodebymp;
my %passwordmap;
my %chassisbyuuid;
my %searchmacs;
my %researchmacs;
my $macmap;

sub get_mac_for_addr {
    my $neigh;
    my $addr = shift;
    if ($addr =~ /:/) {
        get_ipv6_neighbors();
        return $ip6neigh{$addr};
    } else {
        get_ipv4_neighbors();
        return $ip4neigh{$addr};
    }
}

sub get_ipv4_neighbors {

    #TODO: something less 'hacky'
    my @ipdata = `ip -4 neigh`;
    %ip6neigh = ();
    foreach (@ipdata) {
        if (/^(\S*)\s.*lladdr\s*(\S*)\s/) {
            $ip4neigh{$1} = $2;
        }
    }
}

sub get_ipv6_neighbors {

    #TODO: something less 'hacky'
    my @ipdata = `ip -6 neigh`;
    %ip6neigh = ();
    foreach (@ipdata) {
        if (/^(\S*)\s.*lladdr\s*(\S*)\s/) {
            $ip6neigh{$1} = $2;
        }
    }
}

sub handle_new_slp_entity {
    my $data = shift;
    delete $data->{sockaddr};    #won't need it
    my $mac = get_mac_for_addr($data->{peername});
    if ($data->{SrvType} eq "service:management-hardware.IBM:integrated-management-module2" and $data->{attributes}->{"enclosure-form-factor"}->[0] eq "BC2") {
        $data->{macaddress} = $mac;

        #this is a Flex ITE, don't go mac searching for it, but remember the chassis UUID for later
        if ($flexchassismap{ $data->{attributes}->{"chassis-uuid"}->[0] }->{$mac} and $data->{peername} !~ /fe80/) {
            return;
        }
        $flexchassismap{ $data->{attributes}->{"chassis-uuid"}->[0] }->{$mac} = $data;
        return;
    }
    unless ($mac) { return; }
    $searchmacs{$mac} = $data;
}

sub process_request {
    my $request = shift;
    $callback = shift;

    # Since slpdiscover has been merged into lsslp,
    # it will return here.
    sendmsg("Warning: Slpdiscover has been merged to lsslp. Please use lsslp --flexdiscover. \nUse man lsslp to see more details. ", $callback);
    return;
    $docmd      = shift;
    %searchmacs = ();
    my $srvtypes = [qw/service:management-hardware.IBM:chassis-management-module/];
    xCAT::SLP::dodiscover(SrvTypes => $srvtypes, Callback => \&handle_new_slp_entity);
    $srvtypes = [qw/service:management-hardware.IBM:management-module/];
    xCAT::SLP::dodiscover(SrvTypes => $srvtypes, Callback => \&handle_new_slp_entity);
    $srvtypes = [qw/service:management-hardware.IBM:integrated-management-module2/];
    xCAT::SLP::dodiscover(SrvTypes => $srvtypes, Callback => \&handle_new_slp_entity);

    my $mpatab = xCAT::Table->new("mpa", -create => 0);
    my @mpaentries;
    $mpahash = {};
    if (ref $request->{environment} and ref $request->{environment}->[0]->{XCAT_CURRENTPASS}) {
        $currentbladepass = $request->{environment}->[0]->{XCAT_CURRENTPASS}->[0];
    } else {
        $currentbladepass = "PASSW0RD";
    }
    if (ref $request->{environment} and ref $request->{environment}->[0]->{XCAT_CURRENTUSER}) {
        $currentbladeuser = $request->{environment}->[0]->{XCAT_CURRENTUSER}->[0];
    } else {
        $currentbladeuser = "USERID";
    }
    if ($mpatab) {
        @mpaentries = $mpatab->getAllNodeAttribs([qw/mpa username password/]);
        foreach (@mpaentries) {
            $mpahash->{ $_->{mpa} } = $_;
        }
    }
    my $passwdtab = xCAT::Table->new("passwd", -create => 0);
    $defaultbladeuser = "USERID";
    $defaultbladepass = "";
    if ($passwdtab) {
        my @ents = $passwdtab->getAttribs({ key => 'blade' }, 'username', 'password');
        foreach (@ents) {
            if ($_->{username} eq "HMC") { next; }
            if ($_->{username}) { $defaultbladeuser = $_->{username}; }
            if ($_->{password}) { $defaultbladepass = $_->{password}; }
        }
    }
    my $mactab = xCAT::Table->new("mac");
    my %machash;
    my %node2machash;
    my %macuphash;
    my @maclist = $mactab->getAllNodeAttribs([qw/node mac/]);
    foreach (@maclist) {
        $machash{ $_->{node} }     = $_->{mac};
        $node2machash{ $_->{mac} } = $_->{node};
    }



    my $mptab = xCAT::Table->new('mp');
    my $nodecandidates;

    if ($mptab) {
        my @mpents = $mptab->getAllNodeAttribs([ 'node', 'mpa', 'id' ]);
        foreach (@mpents) {
            $nodebymp{ $_->{mpa} }->{ $_->{id} } = $_->{node};
        }
    }

    $macmap = xCAT::MacMap->new();
    $macmap->refresh_table();
    my @toconfig;
    foreach my $mac (keys(%searchmacs)) {
        my $node = $macmap->find_mac($mac, 1);
        unless ($node) {
            if (defined $node2machash{$mac}) {
                $node = $node2machash{$mac};
            } else {
                next;
            }
        }
        my $data = $searchmacs{$mac};
        $data->{nodename}                                              = $node;
        $data->{macaddress}                                            = $mac;
        $chassisbyuuid{ $data->{attributes}->{"enclosure-uuid"}->[0] } = $node;
        push @toconfig, $data;
    }

    foreach my $data (@toconfig) {
        my $mac      = $data->{macaddress};
        my $nodename = $data->{nodename};
        my $addr = $data->{peername}; #todo, use sockaddr and remove the 427 port from it instead?
        if ($addr =~ /^fe80/) {       #Link local address requires scope index
            $addr .= "%" . $data->{scopeid};
        }
        $flexchassisuuid{$nodename} = $data->{attributes}->{"enclosure-uuid"}->[0];

        if ($data->{SrvType} eq "service:management-hardware.IBM:chassis-management-module") {
            sendmsg(":Found " . $data->{SrvType} . " at address $addr", $callback, $nodename);

            setup_cmm_pass($nodename);
            if ($machash{$nodename} =~ /$mac/i) { #ignore prospects already known to mac table
                configure_hosted_elements($nodename);
                next;
            }

            unless (do_blade_setup($data, curraddr => $addr)) {
                next;
            }
            configure_hosted_elements($nodename);
            unless (do_blade_setup($data, curraddr => $addr, pass2 => 1)) {
                next;
            }
            sendmsg(":Configuration complete, configuration may take a few minutes to take effect", $callback, $nodename);
            $macuphash{$nodename} = { mac => $mac };
        }
    }
    $mactab->setNodesAttribs(\%macuphash);
}

sub configure_hosted_elements {
    my $cmm  = shift;
    my $uuid = $flexchassisuuid{$cmm};
    my $node;
    my $immdata;
    my $slot;
    my $user = $passwordmap{$cmm}->{username};
    my $pass = $passwordmap{$cmm}->{password};
    foreach $immdata (values %{ $flexchassismap{$uuid} }) {
        $slot = $immdata->{attributes}->{slot}->[0];
        if ($node = $nodebymp{$cmm}->{$slot}) {
            my $addr = $immdata->{peername}; #todo, use sockaddr and remove the 427 port from it instead?
            if ($addr =~ /^fe80/) {    #Link local address requires scope index
                $addr .= "%" . $immdata->{scopeid};
            }
            if ($doneaddrs{$node}) { next; }
            $doneaddrs{$node} = 1;
            xCAT::IMMUtils::setupIMM($node, nodedata => $immdata, curraddr => $addr, cliusername => $user, clipassword => $pass, callback => $callback);
        } else {
            sendmsg(": Ignoring target in bay $slot, no node found with mp.mpa/mp.id matching", $callback, $cmm);
        }

    }
    while (wait() > 0) { }
}

sub setup_cmm_pass {
    my $nodename  = shift;
    my $localuser = $defaultbladeuser;
    my $localpass = $defaultbladepass;
    if ($mpahash->{$nodename}) {
        if ($mpahash->{$nodename}->{username}) {
            $localuser = $mpahash->{$nodename}->{username};
        }
        if ($mpahash->{$nodename}->{password}) {
            $localpass = $mpahash->{$nodename}->{password};
        }
    }
    $passwordmap{$nodename}->{username} = $localuser;
    $passwordmap{$nodename}->{password} = $localpass;
}

sub do_blade_setup {
    my $data      = shift;
    my %args      = @_;
    my $addr      = $args{curraddr};
    my $nodename  = $data->{nodename};
    my $localuser = $passwordmap{$nodename}->{username};
    my $localpass = $passwordmap{$nodename}->{password};
    if (not $localpass or $localpass eq "PASSW0RD") {
        sendmsg([ 1, ":Password for blade must be specified in either mpa or passwd tables, and it must not be PASSW0RD" ], $callback, $nodename);
        return 0;
    }
    require xCAT_plugin::blade;
    my @cmds;
    my %exargs;
    if ($args{pass2}) {
        @cmds = qw/initnetwork=*/;
        %exargs = (nokeycheck => 1); #still not at the 'right' ip, so the known hosts shouldn't be bothered
    } else {
        @cmds = qw/snmpcfg=enable sshcfg=enable textid=*/; # initnetwork=*/; defer initnetwork until after chassis members have been configured
        %exargs = (curruser => $currentbladeuser, currpass => $currentbladepass);
    }
    my $result;
    $@ = "";
    my $rc = eval { $result = xCAT_plugin::blade::clicmds(
            $nodename,
            $localuser,
            $localpass,
            $nodename,
            0,
            curraddr => $addr,
            %exargs,
            cmds => \@cmds);
        1;
    };
    my $errmsg = $@;
    if ($errmsg) {
        if ($errmsg =~ /Incorrect Password/) {
            sendmsg([ 1, "Failed to set up Management module due to Incorrect Password (You may try the environment variables XCAT_CURRENTUSER and/or XCAT_CURRENTPASS to try a different value)" ], $callback, $nodename);
        } else {
            sendmsg([ 1, "Failed to set up Management module due to $errmsg" ], $callback, $nodename);
        }
        return 0;
    }
    if ($result) {
        if ($result->[0]) {
            if ($result->[2] =~ /Incorrect Password/) {
                sendmsg([ 1, "Failed to set up Management module due to Incorrect Password (You may try the environment variables XCAT_CURRENTUSER and/or XCAT_CURRENTPASS to try a different value)" ], $callback, $nodename);
                return 0;
            }
            my $errors = $result->[2];
            if (ref $errors) {
                foreach my $error (@$errors) {
                    sendmsg([ $result->[0], $error ], $callback, $nodename);
                }
            } else {
                sendmsg([ $result->[0], $result->[2] ], $callback, $nodename);
            }
            return 0;
        }
    }
    return $rc;
}
1;