#Restapi configuration
[Restapi]
restapi-DefaultNRUser=wsuser
restapi-DefaultNRpasswd=cluster
restapi-Cert=/root/ca-cert.pem

#Table configuration
[Table_passwd]
key=system
username=root
password=cluster

[Table_site]
key=nameservers
value=192.168.10.1
key=forwarders
value=9.114.1.1
key=domain
value=ppd.pok.ibm.com
[Object_network]
Name=autotest_ent
net=192.168.10.0
mask=255.255.255.0
gateway=192.168.10.3

#Object configuration
[Object_node]
Name=w1v3hmc05.ppd.pok.ibm.com
groups=hmc,all
nodetype=hmc
mgt=hmc
username=hscroot
password=abc123

[Object_node]
Name=Server-9117-MMA-SN10F6F3D
nodetype=fsp
mtm=9117-MMA
serial=10F6F3D
side=A
hcp=9.114.47.165
groups=fsp,all
mgt=hmc

[Object_node]
Name=lpar5
hcp=w1v3hmc05.ppd.pok.ibm.com
netboot=yaboot
tftpserver=192.168.10.1
nfsserver=192.168.10.1
monserver=192.168.10.1
xcatmaster=192.168.10.1
installnic=eth1
primarynic=eth0
arch=ppc64
profile=compute
os=rhels5.4

#system varible for autotest
[System]
MN=rhmn      
SN=rhsn
CN=lpar5            #It can be used in flat environment
CNWITHSN=lpar6      #It can be used in hierarchy environment for cn
ISO=/iso/RHEL5.4-Server-20090819.0-ppc-DVD.iso
NETDRIVER=ibmveth     #network infterface card driver used by diskless installation
NETBOOTDIR=/opt/xcat/share/xcat/netboot/rh       #path of netboot directory, used by diskless installation
MaxLparID=32
KITDATA=kitdata
#For migration cases Begin
UBUNTU_MIGRATION1_CORE=https://xcat.org/files/xcat/xcat-core/2.10.x_Ubuntu/xcat-core/xcat-core-2.10.tar.bz2
UBUNTU_MIGRATION2_CORE=https://xcat.org/files/xcat/xcat-core/2.11.x_Ubuntu/xcat-core/xcat-core-2.11.1-ubuntu.tar.bz2
UBUNTU_MIGRATION1_DEP=https://xcat.org/files/xcat/xcat-dep/2.x_Ubuntu/xcat-dep-ubuntu-20151012.tar.bz
UBUNTU_MIGRATION2_DEP=https://xcat.org/files/xcat/xcat-dep/2.x_Ubuntu/xcat-dep-ubuntu-2.11.1.tar.bz2
UBUNTU_MIGRATION1_VERSION=2.10
UBUNTU_MIGRATION2_VERSION=2.11.1
MIGRATION1_CORE=http://xcat.org/files/xcat/xcat-core/2.10.x_Linux/xcat-core/xcat-core-2.10.tar.bz2
MIGRATION2_CORE=http://xcat.org/files/xcat/xcat-core/2.11.x_Linux/xcat-core/xcat-core-2.11.1-linux.tar.bz2
MIGRATION1_DEP=http://xcat.org/files/xcat/xcat-dep/2.x_Linux/xcat-dep-2.10.tar.bz2
MIGRATION2_DEP=http://xcat.org/files/xcat/xcat-dep/2.x_Linux/xcat-dep-2.11.1.tar.bz2
MIGRATION1_VERSION=2.10
MIGRATION2_VERSION=2.11.1
LATEST_VERSION=2.12.1
#For migration cass End
#For docker host setup
DOCKERIMAGE=ubuntu
DOCKERCOMMAND=/bin/bash
DOCKERCONIP=10.4.27.100
#container on CN so the ip should be same network section  with CN
DOCKERHOSIP=10.4.27.10
#should be same with CN's ip
DOCKERMNXCAT=xcatmn
MYNET0VALUE=10.0.0.0/8
DOCKERCN=host05c08
#docker host setup end
#For installnics start
INSTALLNICIP=10.2.2.27
#End
#For image define start
STATELITE=rhels7.2-ppc64-statelite-compute
STATELESS=rhels7.2-ppc64-netboot-compute
#End
#For switch case start
range=10.4-5.24-25.1
#End
#For ntp case start
extntpserversip=10.2.1.12
###the extntpserversip should be sure have ntp server on it
DATE=2016
#End
#For bmc test case start
bmcrange=10.4.30.254
#bmc ip
bmcusername=USERID
bmcpasswd=PASSW0RD
#For bmc case u need to set username and passwd first
#End
[Custom]

#commands run before test
[Script_Prev]
#rpm -e xCAT xCAT-server xCAT-client perl-xCAT
#rm -rf /etc/xcat
#rm -rf /root/.xcat
#rm -rf /root/.ssh
#rm -rf /install/autoinst
#rm -rf /install/postscripts
#wget http://xcat.org/files/xcat/xcat-core/devel/Linux/core-snap/core-rpms-snap.tar.bz2
#tar jxf core-rpms-snap.tar.bz2
#./xcat-core/mklocalrepo.sh
#mount -o loop /iso/RHEL5.4-Server-20090819.0-ppc-DVD.iso /iso/1 -t iso9660
#yum -y install xCAT
#umount /iso/1
#rm -f core-rpms-snap.tar.bz2
#rm -rf xcat-core

#commands run after test
[Script_Post]
NODEIP=10.4.27.10
#should same with CN's ip this ip is set for CN's confignics' set up
#genesis testcase
imgip=10.4.27.10
#imgip should be same with MN's ip genesis case only for ppc64le and x86_64