start:testtest
label:mn_only,db,wait_fix
cmd:/opt/xcat/share/xcat/tools/autotest/testcase/xcatconfig/change_site_table_values
check:rc==0
end

start:xcatconfig_null
description:xcatconfig with no argument
label:mn_only
cmd:xcatconfig
check:output=~No parameters were supplied on the xcatconfig command. Run xcatconfig -h
check:rc!=0
end

start:xcatconfig_h
description:xcatconfig -h and --help
label:mn_only
cmd:xcatconfig -h
check:rc==0
check:output=~Usage
cmd:xcatconfig --help
check:rc==0
check:output=~Usage
end

start:xcatconfig_v
description:xcatconfig -v and --version
label:mn_only
cmd:xcatconfig -v
check:rc==0
check:output=~version|Version
cmd:xcatconfig --version
check:rc==0
check:output=~version|Version
end

start:xcatconfig_k
description:To regenerate root's ssh keys
label:mn_only
#step1:backup /root/.ssh
cmd:cp -rf /root/.ssh /root/sshbak
check:rc==0
#step2: run command
cmd:xcatconfig -k
check:rc==0
check:output=~Generated /root/.ssh/id_rsa.pub
#step3: To make sure /root/.ssh/id_rsa.pub is regenerated
cmd:diff /root/.ssh/id_rsa.pub /root/sshbak/id_rsa.pub
check:rc!=0
#make sure the /install/postscripts/_ssh/authorized_keys is rewrite
cmd:diff /root/.ssh/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
#step4. restore test environment
cmd:cp -rf /root/sshbak/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
cmd:mv -f /root/sshbak/* /root/.ssh
check:rc==0
cmd:rm -rf /root/sshbak
check:rc==0
end


start:xcatconfig_k_c
description:To regenerate root's ssh keys and cretials
label:mn_only
#step1:backup /root/.ssh
cmd:cp -rf /root/.ssh /root/sshbak
check:rc==0
#step2:run command and check the output
cmd:xcatconfig -k -c >/tmp/xcatconfig.test 2>&1
check:rc==0
cmd:grep -Ei "error|fail" /tmp/xcatconfig.test
check:rc!=0
cmd:grep "Generated /root/.ssh/id_rsa.pub" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Created xCAT certificate" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Signature ok"  /tmp/xcatconfig.test
check:rc==0
#step3:To make sure /root/.ssh/id_rsa.pub is regenerated
cmd:diff /root/.ssh/id_rsa.pub /root/sshbak/id_rsa.pub
check:rc!=0
#make sure the /install/postscripts/_ssh/authorized_keys is rewrite
cmd:diff /root/.ssh/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
#step4:restore test environment
cmd:cp -rf /root/sshbak/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
cmd:mv -f /root/sshbak/* /root/.ssh
check:rc==0
cmd:rm -rf /root/sshbak
check:rc==0
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
end


start:xcatconfig_c
description:To regenerate cretials
label:mn_only
#step1:backup: /etc/xcat/ca /etc/xcat/cert
cmd:cp -r /etc/xcat/ca /etc/xcat/cabak;cp -r /etc/xcat/cert /etc/xcat/certbak
#step2:run command and check the output
cmd:xcatconfig  -c 2>&1 | tee /tmp/xcatconfig.test 
check:rc==0
cmd:grep -iE "fail|error" /tmp/xcatconfig.test
check:rc!=0
cmd:grep "Created xCAT certificate" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Signature ok" /tmp/xcatconfig.test
check:rc==0
#step3:make sure the  /etc/xcat/ca /etc/xcat/cert is rewrite
cmd:diff -y /etc/xcat/ca /etc/xcat/cabak
check:rc!=0
cmd:diff -y /etc/xcat/cert /etc/xcat/certbak
check:rc!=0
#step4:restore test environment
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
cmd:mv -f /etc/xcat/cabak /etc/xcat/ca ;mv -f /etc/xcat/certbak /etc/xcat/cert
check:rc==0
end

start:xcatconfig_s
description:To regenerate node host ssh keys
label:mn_only
#step1:backup: /etc/xcat/hostkeys  /install/postscripts/hostkeys
cmd:cp -rf /etc/xcat/hostkeys /etc/xcat/hostkeysbak
check:rc==0
cmd:cp -rf /install/postscripts/hostkeys /install/postscripts/hostkeysbak
check:rc==0
#step2:run command and check messages
cmd:xcatconfig -s
check:rc==0
check:output=~Generating new node hostkeys
check:output=~Generating SSH2 RSA Key
#step3:Make sure /etc/xcat/hostkeys/ssh_host_rsa_key.pub is regenerated
cmd:diff /etc/xcat/hostkeys/ssh_host_rsa_key.pub /etc/xcat/hostkeysbak/ssh_host_rsa_key.pub
check:rc!=0
#step4:Make sure /install/postscripts/hostkeys/ssh_host_rsa_key.pub is regenerated 
cmd:diff /install/postscripts/hostkeys/ssh_host_rsa_key.pub /install/postscripts/hostkeysbak/ssh_host_rsa_key.pub
check:rc!=0
#step5:restore test environment
cmd:rm -rf /etc/xcat/hostkeys/*;mv -f /etc/xcat/hostkeysbak/* /etc/xcat/hostkeys
check:rc==0
cmd:rm -rf /etc/xcat/hostkeysbak
check:rc==0
cmd:rm -rf /install/postscripts/hostkeys/*;mv -f /install/postscripts/hostkeysbak/* /install/postscripts/hostkeys
check:rc==0
cmd:rm -rf /install/postscripts/hostkeysbak;rm -rf /etc/xcat/hostkeysbak
check:rc==0
end

start:xcatconfig_s_c
description:To regenerate node host ssh keys and credentials
label:mn_only
#step1:backup: /etc/xcat/hostkeys  /install/postscripts/hostkeys
cmd:cp -rf /etc/xcat/hostkeys /etc/xcat/hostkeysbak
check:rc==0
cmd:cp -rf /install/postscripts/hostkeys /install/postscripts/hostkeysbak
check:rc==0
#step2:run command and check messages
cmd:xcatconfig -s -c 2>&1 |tee /tmp/xcatconfig.test
check:rc==0
cmd:grep -iE "fail|error" /tmp/xcatconfig.test
check:rc!=0
cmd:grep "Created xCAT certificate" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Generating new node hostkeys" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Signature ok" /tmp/xcatconfig.test
check:rc==0
cmd:grep "Generating SSH2 RSA Key" /tmp/xcatconfig.test
check:rc==0
#step3:Make sure /etc/xcat/hostkeys/ssh_host_rsa_key.pub is regenerated
cmd:diff /etc/xcat/hostkeys/ssh_host_rsa_key.pub /etc/xcat/hostkeysbak/ssh_host_rsa_key.pub
check:rc!=0
#step4:Make sure /install/postscripts/hostkeys/ssh_host_rsa_key.pub is regenerated 
cmd:diff /install/postscripts/hostkeys/ssh_host_rsa_key.pub /install/postscripts/hostkeysbak/ssh_host_rsa_key.pub
check:rc!=0
#step5:restore test environment
cmd:rm -rf /etc/xcat/hostkeys/*;mv -f /etc/xcat/hostkeysbak/* /etc/xcat/hostkeys
check:rc==0
cmd:rm -rf /install/postscripts/hostkeys/*;mv -f /install/postscripts/hostkeysbak/* /install/postscripts/hostkeys
check:rc==0
cmd:rm -rf /install/postscripts/hostkeysbak
check:rc==0
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
cmd:rm -rf /etc/xcat/hostkeysbak;rm -rf /install/postscripts/hostkeysbak
check:rc==0
end

start:xcatconfig_d_V
description:This -d option will reinitialize the basic xCAT database table setup
label:mn_only
#step1:backup database and prepare test data
cmd:dumpxCATdb -p /tmp/xcatconfigtest
check:rc==0
#change existed key's value
cmd:chtab key=maxssh site.value=888
check:rc==0
#add new key and value
cmd:chtab key=testxcatconfigoptiond site.value=test
check:rc==0
#step2:run command and check messages
cmd:xcatconfig -d -V
check:rc==0
check:output=~Updated cluster site definition
#step3:Make sure existed key's value is reinited
cmd:lsdef -t site -i maxssh | grep "=8$"
check:rc==0
#make sure the added key and value are existed and not changed
cmd:lsdef -t site -i testxcatconfigoptiond | grep "=test$"
check:rc==0
#step4:restore test environment
cmd:restorexCATdb -p /tmp/xcatconfigtest
check:rc==0
cmd:rm -rf /tmp/xcatconfigtest
end



start:xcatconfig_i
description:Initial the xCAT installation in Management Node, only node host key regenerated, xcatd restart; xCAT credentials, database and the ssh key are not changed
label:mn_only
#step1:backup test environment and prepare test data
#backup test environment, including database, /root/.ssh/, /etc/xcat/hostkey/, install/postscripts/hostkeys
cmd:dumpxCATdb -p /tmp/xcatconfigtest
check:rc==0
cmd:cp -rf /etc/xcat/hostkeys /etc/xcat/hostkeysbak
check:rc==0
cmd:cp -rf /install/postscripts/hostkeys /install/postscripts/hostkeysbak
check:rc==0
cmd:cp -rf /root/.ssh /root/sshbak
check:rc==0
#prepare data:change existed site.maxssh, and add new key with value
cmd:chtab key=testxcatconfigoptiond site.value=test
check:rc==0
cmd:chtab key="dhcplease" site.value=43201
check:rc==0
#step2: run command and check output
cmd:xcatconfig -i >/tmp/xcatconfig.test 2>&1
check:rc==0
cmd:if [[ `cat /tmp/xcatconfig.test |grep FAILED` ]] || [[ `cat /tmp/xcatconfig.test |grep error` ]] || [[ `cat /tmp/xcatconfig.test |grep "Created xCAT certificate"` ]] || [[ `cat /tmp/xcatconfig.test |grep "fail"` ]] || [[ `cat /tmp/xcatconfig.test |grep Error` ]];then exit 1;fi
check:rc==0
#step3: check the test result
#xCATd is running
cmd:service xcatd status
check:rc==0
check:output=~(active \(running\)|service is running)
#node ssh key are regenerated
cmd:diff /etc/xcat/hostkeys/ssh_host_rsa_key.pub /etc/xcat/hostkeysbak/ssh_host_rsa_key.pub
check:rc!=0
#/root/.ssh are still the same, not changed
cmd:diff /root/.ssh/id_rsa.pub /root/sshbak/id_rsa.pub
check:rc==0
cmd:diff /root/.ssh/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
#keys in site table are not changed
cmd:lsdef -t site -i testxcatconfigoptiond | grep "=test" 
check:rc==0
cmd:lsdef -t site -i "dhcplease" | grep "=43201" 
check:rc==0
#step4.restore test environment
cmd:rm -rf /etc/xcat/hostkeysbak;rm -rf /install/postscripts/hostkeysbak
check:rc==0
cmd:restorexCATdb -p /tmp/xcatconfigtest
check:rc==0
cmd:lsdef -t site -i "dhcplease" | grep "=43200" 
check:rc==0
cmd:rm -rf /tmp/xcatconfigtest
check:rc==0
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
end
     
     
start:xcatconfig_u
description:Update xCAT in Management Node, xcatd restart; database, xCAT credentials, node ssh key and root ssh key are not changed
label:mn_only
#step1:backup test environment and prepare test data
#backup test environment, including database, /root/.ssh/, /etc/xcat/hostkey/, install/postscripts/hostkeys
cmd:dumpxCATdb -p /tmp/xcatconfigtest
check:rc==0
cmd:cp -rf /etc/xcat/hostkeys /etc/xcat/hostkeysbak
check:rc==0
cmd:cp -rf /install/postscripts/hostkeys /install/postscripts/hostkeysbak
check:rc==0
cmd:cp -rf /root/.ssh /root/sshbak
check:rc==0
#prepare data:change existed site.maxssh, and add new key with value
cmd:chtab key=maxssh site.value=888
check:rc==0
cmd:chtab key=testxcatconfigoptiond site.value=test
check:rc==0
#step2: run command and check output
cmd:xcatconfig -u > /tmp/xcatconfig.test 2>&1
check:rc==0
cmd:if [[ `cat /tmp/xcatconfig.test |grep FAILED` ]] || [[ `cat /tmp/xcatconfig.test |grep error` ]] || [[ `cat /tmp/xcatconfig.test |grep "Created xCAT certificate"` ]] || [[ `cat /tmp/xcatconfig.test |grep "fail"` ]] || [[ `cat /tmp/xcatconfig.test |grep Error` ]];then exit 1;fi
check:rc==0
#step3: check the test result
#xCATd is running
cmd:service xcatd status
check:rc==0
check:output=~(active \(running\)|service is running)
#node ssh key not changed
cmd:diff /etc/xcat/hostkeys/ssh_host_rsa_key.pub /etc/xcat/hostkeysbak/ssh_host_rsa_key.pub
check:rc==0
#/root/.ssh are still the same, not changed
cmd:diff /root/.ssh/id_rsa.pub /root/sshbak/id_rsa.pub
check:rc==0
cmd:diff /root/.ssh/id_rsa.pub /install/postscripts/_ssh/authorized_keys
check:rc==0
#keys in site table are not changed
cmd:lsdef -t site -i testxcatconfigoptiond | grep "=test$"
check:rc==0
cmd:lsdef -t site -i maxssh | grep "=888$" 
check:rc==0
#step4.restore test environment
cmd:restorexCATdb -p /tmp/xcatconfigtest
check:rc==0
cmd:rm -rf /etc/xcat/hostkeysbak;rm -rf /install/postscripts/hostkeysbak
check:rc==0
cmd:rm -rf /tmp/xcatconfigtest
check:rc==0
cmd:rm -rf /tmp/xcatconfig.test
check:rc==0
end

start:xcatconfig_u_check_xcatsslversion_rhels_sles
description:after xcatconfig -u the site.xcatsslversion will not be changed
os:rhels,sles
label:mn_only
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv1$'
check:rc==0
cmd:chtab key=xcatsslversion site.value=TLSv12
check:rc==0
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv12$'
check:rc==0
cmd:xcatconfig -u
check:rc==0
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv12$'
check:rc==0
cmd:chtab key=xcatsslversion site.value=TLSv1
check:rc==0
end


start:xcatconfig_u_check_xcatsslversion_ubuntu
description:after xcatconfig -u the site.xcatsslversion will not be changed
os:ubuntu
label:mn_only
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv1$'
check:rc==0
cmd:chtab key=xcatsslversion site.value=TLSv1_2
check:rc==0
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv1_2$'
check:rc==0
cmd:xcatconfig -u
check:rc==0
cmd:lsdef -t site -i xcatsslversion -c | grep '=TLSv1_2$'
check:rc==0
cmd:chtab key=xcatsslversion site.value=TLSv1
check:rc==0
end