start:perftest_5000
description:Default performance testing on 5000 fake nodes
os:Linux
cmd:which yum &>/dev/null && yum install -y bridge-utils || apt install -y bridge-utils
cmd:copycds $$ISO
check:rc==0
cmd:xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/perfcmds.lst
check:rc==0
end

start:UT_perftest_5000_MN_only
description:Default performance testing on 5000 fake nodes without extra configuration on MN
os:Linux
cmd:which yum &>/dev/null && yum install -y bridge-utils || apt install -y bridge-utils
check:rc==0
cmd:xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/perfcmds.lst
check:rc==0
end

start:perftest_5000_with_simulators
description:Default performance testing on 5000 fake nodes
os:Linux
### From reg_linux_diskfull_installation_flat
cmd:fdisk -l
cmd:df -T

cmd:MINIISO=NUll;if [[ "__GETNODEATTR($$CN,os)__" =~ "ubuntu" ]] && [[ "__GETNODEATTR($$CN,arch)__" =~ "ppc64" ]];then mkdir /tmp/iso; mount -o loop $$MINIISO /tmp/iso ;  mkdir -p  /install/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/install/netboot; cp  /tmp/iso/install/initrd.gz  /install/__GETNODEATTR($$CN,os)__/__GETNODEATTR($$CN,arch)__/install/netboot;umount /tmp/iso; rmdir /tmp/iso; fi
check:rc==0
cmd:chdef -t node -o $$CN servicenode= monserver= nfsserver= tftpserver=  xcatmaster= status=
check:rc==0
cmd:chdef -t node -o $$SN servicenode= monserver= nfsserver= tftpserver=  xcatmaster= status=
check:rc==0
cmd:makeconservercf
check:rc==0
cmd:cat /etc/conserver.cf | grep $$CN
check:output=~$$CN
cmd:cat /etc/conserver.cf | grep $$SN
check:output=~$$SN
cmd:sleep 20
cmd:makedhcp -n
check:rc==0
cmd:makedhcp -a
check:rc==0
cmd:sleep 10
cmd:a=0;while true; do [ $a -eq 100 ] && exit 1;output=$(makedhcp -q $$CN);[ $? -ne 0 ] && exit 1;echo $output|grep $$CN 2>/dev/null && exit 0;a=$[$a+1];sleep 1;done
check:rc==0
cmd:a=0;while true; do [ $a -eq 100 ] && exit 1;output=$(makedhcp -q $$SN);[ $? -ne 0 ] && exit 1;echo $output|grep $$SN 2>/dev/null && exit 0;a=$[$a+1];sleep 1;done
check:rc==0
cmd:copycds $$ISO
check:rc==0
cmd:lsdef -l $$SN,$$CN
check:rc==0
cmd:rinstall $$SN,$$CN osimage=__GETNODEATTR($$CN,os)__-__GETNODEATTR($$CN,arch)__-install-compute
check:rc==0
#check:output=~Provision node\(s\)\: $$CN
#check:output=~Provision node\(s\)\: $$SN
cmd:if [[ -f /var/lib/dhcp/db/dhcpd.leases ]]; then cat /var/lib/dhcp/db/dhcpd.leases; elif [[ -f /var/lib/dhcpd/dhcpd.leases ]];then cat /var/lib/dhcpd/dhcpd.leases;elif [[ -f /var/lib/dhcp/dhcpd.leases ]];then cat /var/lib/dhcp/dhcpd.leases; fi

#After starting installation, began run fake nodes testing on MN
cmd:which yum &>/dev/null && yum install -y bridge-utils || apt install -y bridge-utils
cmd:FAKE_NETWORK_PRO=173.18 FAKE_NETWORK_BMC=192.169 PERF_RPT_FILE=perfreport-5000.log.daily xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/perfcmds.lst
check:rc==0

cmd:PERF_CREATE_ONLY=y FAKE_NETWORK_PRO=173.18 FAKE_NETWORK_BMC=192.169 xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/perfcmds.lst
check:rc==0
cmd:makehosts -n perftest
check:rc==0

#Make sure SN and CN is deployed sucessfully
cmd:a=0;while ! `lsdef $$CN -i status|grep -E "booted|failed" >/dev/null`; do sleep 20;((a++));if [ $a -gt 50 ];then break;fi done
cmd:ping $$CN -c 3
check:rc==0
cmd:a=0;while ! `lsdef $$SN -i status|grep -E "booted|failed" >/dev/null`; do sleep 20;((a++));if [ $a -gt 50 ];then break;fi done
cmd:ping $$SN -c 3
check:rc==0

#Setup Simulater environment on SN/CN
cmd:xdsh $$SN,$$CN "rm -rf /tmp/perf && mkdir -p /tmp/perf"
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/testcase/performance/* root@$$CN:/tmp/perf
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/testcase/performance/* root@$$SN:/tmp/perf
check:rc==0

# For openbmc simulation setup on SN
cmd:PERF_SIM_NIC=$$SECONDNIC xcatperftest create fake[1-1000] openbmc
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/result/perf-openbmc-create.sh root@$$SN:/tmp/perf
check:rc==0
cmd:xdsh $$SN PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=192.169.251.252 bash /tmp/perf/simulatorctl.sh setup openbmc
check:rc==0
cmd:PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=192.169.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh setup openbmc --mn
check:rc==0
cmd:ping 192.169.251.252 -c 3
check:rc==0

# Testing for HW remote control CLIs
cmd:PERF_NOCREATE=1 PERF_RPT_FILE=perfreport-5000.log.daily xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/testcase/performance/hwcmd.lst
check:rc==0
cmd:xdsh $$SN PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=192.169.251.252 bash /tmp/perf/simulatorctl.sh clean openbmc
check:rc==0
cmd:PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=192.169.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh clean openbmc --mn
check:rc==0

# For container simulation setup on SN/CN
cmd:xcatperftest create fake[1-100] docker
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/result/perf-docker-create.sh root@$$CN:/tmp/perf
check:rc==0

cmd:xcatperftest create fake[501-600] docker
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/result/perf-docker-create.sh root@$$SN:/tmp/perf
check:rc==0

cmd:xdsh $$CN PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=173.18.251.252 bash /tmp/perf/simulatorctl.sh setup docker
check:rc==0

cmd:xdsh $$SN PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=173.18.251.253 bash /tmp/perf/simulatorctl.sh setup docker
check:rc==0

cmd:PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=173.18.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh setup docker --mn
check:rc==0
cmd:ping 173.18.251.252 -c 3
check:rc==0

# Testing for updatenode, xdsh, nodestat, pping, etc
cmd:PERF_NOCREATE=1 PERF_RPT_FILE=perfreport-5000.log.daily xcatperftest 5000 /opt/xcat/share/xcat/tools/autotest/testcase/performance/nodecmd.lst
check:rc==0

cmd:xdsh $$CN,$$SN PERF_SIM_NIC=$$SECONDNIC bash /tmp/perf/simulatorctl.sh clean docker
check:rc==0

cmd:PERF_SIM_NIC=$$SECONDNIC PERF_SIM_ADDR=173.18.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh clean docker --mn
check:rc==0

end


start:UT_perftest_1000_with_simulators
description: UT for performance testing with simulators on an existing environment with one compute node.
os:Linux

# Create fake nodes
cmd:PERF_CREATE_ONLY=y FAKE_NETWORK_PRO=173.18 FAKE_NETWORK_BMC=192.169 xcatperftest 1000 /opt/xcat/share/xcat/tools/autotest/perfcmds.lst
check:rc==0
cmd:makehosts -n perftest
check:rc==0

#Make sure CN is deployed sucessfully
cmd:ping $$CN -c 3
check:rc==0

#Setup Simulater environment
cmd:xdsh $$CN "rm -rf /tmp/perf && mkdir -p /tmp/perf"
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/testcase/performance/* root@$$CN:/tmp/perf
check:rc==0

# For openbmc simulation setup
cmd:xcatperftest create fake[1-1000] openbmc
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/result/perf-openbmc-create.sh root@$$CN:/tmp/perf
check:rc==0
cmd:xdsh $$CN PERF_SIM_ADDR=192.169.251.252 bash /tmp/perf/simulatorctl.sh setup openbmc
check:rc==0
cmd:PERF_SIM_ADDR=192.169.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh setup openbmc --mn
check:rc==0
cmd:ping 192.169.251.252 -c 3
check:rc==0

# Testing for HW remote control CLIs
cmd:PERF_NOCREATE=1 xcatperftest 1000 /opt/xcat/share/xcat/tools/autotest/testcase/performance/hwcmd.lst
check:rc==0
cmd:xdsh $$CN PERF_SIM_ADDR=192.169.251.252 bash /tmp/perf/simulatorctl.sh clean openbmc
check:rc==0
cmd:PERF_SIM_ADDR=192.169.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh clean openbmc --mn
check:rc==0

# For container simulation setup
cmd:xcatperftest create fake[1-50] docker
check:rc==0
cmd:scp /opt/xcat/share/xcat/tools/autotest/result/perf-docker-create.sh root@$$CN:/tmp/perf
check:rc==0

cmd:xdsh $$CN PERF_SIM_ADDR=173.18.251.252 bash /tmp/perf/simulatorctl.sh setup docker
check:rc==0

cmd:PERF_SIM_ADDR=173.18.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh setup docker --mn
check:rc==0
cmd:ping 173.18.251.252 -c 3
check:rc==0

# Testing for updatenode, xdsh, nodestat, pping, etc
cmd:PERF_NOCREATE=1 xcatperftest 1000 /opt/xcat/share/xcat/tools/autotest/testcase/performance/nodecmd.lst
check:rc==0

cmd:xdsh $$CN bash /tmp/perf/simulatorctl.sh clean docker
check:rc==0

cmd:PERF_SIM_ADDR=173.18.251.251 bash /opt/xcat/share/xcat/tools/autotest/testcase/performance/simulatorctl.sh clean docker --mn
check:rc==0

end