GONG Jie
d402d46ca6
Remove trailing spaces in file docs/source/guides/admin-guides/references/man7/eventlog.7.rst
2017-12-31 23:59:59 +00:00
GONG Jie
4ba21e215f
Remove trailing spaces in file docs/source/guides/admin-guides/references/man7/boottarget.7.rst
2017-12-31 23:59:59 +00:00
GONG Jie
057f1079ef
Remove trailing spaces in file docs/source/guides/admin-guides/references/man7/auditlog.7.rst
2017-12-31 23:59:59 +00:00
Mark Gurevich
a38ffa18f7
Auditlog table doc improvement
2018-05-04 11:33:27 -04:00
Mark Gurevich
36b0b69cf4
Documentation changes for REST API token
2018-04-17 15:55:09 -04:00
Mark Gurevich
8cfe5b546e
Replace usage of PNOR with Host
2018-03-28 13:09:48 -04:00
Victor Hu
f2c4ce1677
Update man page for RTD for 2.13.10 release
2018-01-25 14:19:21 -05:00
Bin Xu
c0074cf8ab
Add the 'postbooting' status to indicate xCAT start to handle postboot tasks ( #4346 ) ( #4369 )
...
- for diskful, it will be set when leaving 'booting' stage
- for diskless, it will be set when leaving 'netbooting' stage
- for diskful reboot, it will set when (site.runpostscript=1)
- modify the document accordingly
- also modify GlobalDef.pm, but it won't have impact as the status will not be in nodeset operation.
2018-01-19 02:39:11 -06:00
Victor Hu
fea20ba4b9
Update the .rst man page files generated for 2.13.9 release
2017-12-14 16:47:44 -05:00
Casandra Qiu
31d29641d8
change status back to starts
2017-12-08 14:49:47 -05:00
Casandra Qiu
62f56d1b25
build rst file from Schema.pm by db2man
2017-12-08 14:14:36 -05:00
Casandra Qiu
886d730f8a
Modify documenation for servicenode attributes
2017-12-08 12:01:48 -05:00
Victor Hu
291184e0f3
Looks like some man page updated were missed for 2.13.8
2017-11-03 14:54:18 -04:00
Mark Gurevich
62c56561f2
mend
2017-08-15 13:39:05 -04:00
Mark Gurevich
f2df608156
Sync up .rst files
2017-05-19 14:30:14 -04:00
ertaozh
27dcfbbd7a
enhance descript of postscripts.postscripts and postscripts.postbootscripts
2017-05-12 21:40:11 -04:00
ertaozh
e07b607b44
Fix issue 2577: chdef -m should return correct warning message when some attributes is not permit to be changed.
2017-05-12 06:33:37 -04:00
XuWei
47996885e8
add rst files for schema changes
2017-05-08 21:54:05 -04:00
Casandra Qiu
865527400f
ADD support for power reset of PDU outlet
2017-03-21 12:01:42 -04:00
Casandra Qiu
6a5b8b3bbc
Handle bad return code from pdu commands
2017-03-09 17:26:35 -05:00
Casandra Qiu
896723163d
Check in rst files created by man page changes for PDU
2017-02-16 16:10:14 -05:00
Victor Hu
50241fc7bf
Update the man pages in preparation for the 2.13.0 release
2016-12-05 10:22:13 -05:00
yangsong
72d20a23be
Merge pull request #2156 from gurevichmark/postinstall-doc
...
postinstall script description, formatting and spelling
2016-12-05 10:16:21 +08:00
Mark Gurevich
9cf54f66cb
Review recommended changes
2016-11-30 13:41:48 -05:00
Xiaopeng Wang
32ba9701ca
Merge pull request #1868 from zet809/fix_issue_1734
...
fix issue 1734: Update the help info for node.mac to know how to hand…
2016-11-28 13:24:39 +08:00
ertaozh
bea547512a
fix issue 1734: Update the help info for node.mac to know how to handle installnic bond
2016-11-25 22:59:26 -05:00
Mark Gurevich
fb49715667
postinstall script description, formatting and spelling
2016-11-15 13:19:53 -05:00
Mark Gurevich
a50f3710f7
Doc spelling and gramma fixes
2016-10-25 15:31:20 -04:00
hu-weihua
a6c910467e
Refine hack_uname() in mlnxofed_ib_install.v2
2016-10-18 23:15:19 -04:00
Matt Ezell
443fefdea1
Use auto-generated docs for networks.mtu
2016-10-03 22:11:59 -04:00
Matt Ezell
1e11b6e80f
Add support for a default MTU on a network
...
Add a MTU column to the networks table. If set, this will configure the MTU in
DHCP so that nodes will have the correct MTU during provisioning. This is
important for large systems to enable jumbo frames to reduce CPU usage when
copying diskless images over the network (before the confignics postscript can
run to set the desired MTU).
2016-10-01 16:01:28 -04:00
Victor Hu
c787341fed
update the .rst files from the changes in the code
2016-09-29 21:13:33 -04:00
immarvin
b6d14179ca
add IMG_NAME into the environment variables to postinstall scripts
2016-09-23 14:32:54 +08:00
immarvin
66c99aad31
fix issue netboot postscripts have no knowledge about the osimage it is installing. #1857 ; export osimage attributes to postinstall scripts as environment variables
2016-09-22 05:05:00 -04:00
Victor Hu
6bdfc2044b
Fixed based on review comments
2016-09-16 19:03:21 -04:00
Victor Hu
031a5022ce
Change the man page for the chain table
2016-09-15 14:01:04 -04:00
Mark Gurevich
43a728b34f
Change attribute name from vlantag to bmcvlantag
2016-09-12 14:36:20 -04:00
Mark Gurevich
fda2090c86
Update Schema.pm to generate new man pages for consoleondemand attribute
2016-09-09 16:08:40 -04:00
Mark Gurevich
3c8144055b
Modify description of taggedvlan column in ipmi db table
2016-09-02 11:47:40 -04:00
Mark Gurevich
d914696c2b
Add vlan tag to node and group object attributes
2016-09-01 16:08:14 -04:00
wangxiaopeng
39955c0cb5
issue 1471: fix the mistake in the man page for mkdef --template
2016-07-07 06:13:19 -04:00
Mark Gurevich
7675f7ca6e
Schema.pm missing objects and spelling fixes
2016-06-07 15:13:34 -04:00
xuweibj
014de562f9
Merge pull request #1111 from whowutwut/install_disk
...
Modify the getinstdisk to create files called /tmp/xcat.install_disk to indicate xCAT related files (DO NOT MERGE until after branch 2.12)
2016-06-07 14:28:00 +08:00
Mark Gurevich
300e7610b1
More formatting changes for the <or> display
2016-05-27 12:27:34 -04:00
Mark Gurevich
f49345368e
Checkin generated man5 and man7 generated .rst files
2016-05-27 11:55:59 -04:00
Victor Hu
23e124ac2d
Modify the getinstdisk to create a temporary file called /tmp/xcat.install_disk
...
so that it's easier for the admin who is debugging the install to know which files
are created by xCAT
2016-05-12 13:33:28 -04:00
Victor Hu
a2815940c2
Update the missed .rst file changes to the master branch
2016-04-28 09:24:11 -04:00
penguhyang
2b5e08a92f
Update the description for netboot attribute
2016-03-23 04:07:19 -04:00
Victor Hu
66b2047714
Update the rst documents missed when making POD changes
2016-03-21 15:57:02 -04:00
chenglch
c6e663d1fd
Use fifo pipe to enhance getadapter
...
Currently the getadapter implementation store the nics information
in multiple files. This implementaion will store the records in the
database and add the following changes:
1. Add taskstate table to record the getadapter request.
2. Add route_request hook in xcatd to avoid of too much process.
3. Add adapterinfo column to keep the adapter information.
4. Use fifo pipe to send/recv the adapter message and wake up the waiting process.
5. Use alarm signal to handle the timeout event.
2016-01-25 01:53:54 -05:00
