e16cea2688
Merge tag '2.13.11' into lenovobuild2.13
...
xCAT 2.13.11 release
2018-03-26 10:49:04 -04:00
08c29357bf
Update getinstdisk to better handle M.2/ahci devices
2018-03-02 15:42:15 -05:00
2ca56404d9
Add boot nvme support and filter small devices ( #4778 )
...
nvme devices were not autosensed as install candidates.
Also, devices smaller than 128 MB are filtered out, as they are likely
to be some media or similar.
2018-02-23 10:32:34 +08:00
a98cb37ced
Give priority to likely boot volumes when mixed with raid controller
...
A common configuration is an ahci attached boot device. Prefer
ahci over megaraid as a result.
2018-02-02 14:12:33 -05:00
ce311f0ab6
Add boot nvme support and filter small devices
...
nvme devices were not autosensed as install candidates.
Also, devices smaller than 128 MB are filtered out, as they are likely
to be some media or similar.
2018-02-01 13:52:15 -05:00
cb25622331
It is for provision log enhancement and partial address #4582 ( #4648 )
...
- clear logs in the key components during provisioning (not only debug mode, but debug mode will have more logs)
- now only cover rhel7 stateful and stateless
- make more syslogs into cluster.log (tag = xcat or xcat.*)
- the changes will not impact other distro
2018-01-23 03:20:42 -06:00
6c2459731b
Merge tag '2.13.8' into lenovobuild2.13
...
xCAT 2.13.8 release
2017-11-28 14:01:03 -05:00
a6661f84b7
Merge pull request #2927 from zVMopenstack/ZVM_XCAT_DEV
...
Merge the changes made for zVM into the xCAT development branch
2017-10-18 17:06:31 +08:00
7515be4590
fix issue If service node is down, control to OpenBMC node never returns #3888:use port 3054 instead of 3001 to run debug commands inside installer
2017-10-12 01:55:20 -04:00
35d299f9d6
fix issue If service node is down, control to OpenBMC node never returns #3888:use port 3004 instead of 3001 to run debug commands inside installer
2017-10-11 04:21:01 -04:00
61805a19ab
Improvements to RH/Centos Kickstart templates. ( #4046 )
...
* remove spaces at EOL
* Saner partitioning section in templates
* Save install time xCAT logs for service nodes
* remove duplicates from `service.rhels7.*.pkglist`
2017-10-10 00:37:41 -05:00
c012b45ec1
Merge branch 'master' into ZVM_XCAT_DEV
2017-10-03 09:44:06 -04:00
f3f41848ae
Merge tag '2.13.7' into lenovobuild2.13
...
xCAT 2.13.7 release
2017-09-27 15:52:44 -04:00
72d99850e2
Ensure mypostscript has permission 700 ( #3847 )
...
Only root needs to run this script
2017-09-07 09:18:35 +08:00
02be314d54
Merge pull request #3705 from robin2008/xcatdsource-impact
...
Filter non-content lines when generating mypostscripts
2017-08-17 12:20:03 +08:00
8c663f946b
Filter non-content lines when generating mypostscripts
2017-08-17 10:49:27 +08:00
fab77a0c30
Adding strace to the pkglist for service nodes
2017-08-11 22:53:02 -04:00
6210f197dc
Adding some packages that would help debug issues on the service nodes
2017-08-10 14:54:42 -04:00
e9029f484f
Merge branch 'master' into ZVM_XCAT_DEV
2017-08-09 09:31:22 -04:00
3490fa5fed
Kickstart improvements for Centos templates ( #3462 )
...
* `pre.rh*` scripts: Whitespace cleanup
* Whitespace cleanup
* util-linux-ng back to util-linux in 2014
* Add Centos7 KVM template(based on rhels7)
* Minor improvements to Centos7 compute template
2017-07-16 21:00:47 -05:00
9184cbe03f
Disable postscripts before running postscripts
...
If a postscript rebooted the system, it would start over.
Deal with it by first disabling the postscript service, then
executing the service.
2017-07-13 17:09:34 -04:00
77bab0ba0f
Merge tag '2.13.5' into lenovobuild2.13
2017-06-30 08:47:25 -04:00
11f351cf6e
Merge pull request #2763 from samveen/reduce_greps
...
Reduce `grep` invocations by passing `-[46]` to `ip`
2017-06-22 16:24:04 +08:00
8a2a7ccdc1
Merge tag '2.13.4' into lenovobuild2.13
...
xCAT 2.13.4 release
2017-06-21 13:58:26 -04:00
6720675b21
revert to old udevadm code ( #3294 )
2017-06-20 04:08:51 -05:00
e8aa65e5fe
Merge branch 'master' into ZVM_XCAT_DEV
2017-06-12 08:07:38 -04:00
bdd8e64cf4
fix issue #2856 : [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later ( #2857 )
...
* fix issue [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later #2856
* fix issue [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later #2856
2017-06-08 10:18:03 -04:00
9c4b0ee551
fix issue postscript fails and status=booted. #2665
2017-06-08 10:16:50 -04:00
29d8a98499
Fix double logging of postscript output in /var/log/xcat/xcat.log
2017-06-08 10:16:22 -04:00
f1b406dbc0
Reduce grep invocations by passing -[46] to ip
2017-06-06 09:53:29 +00:00
6c8034cfa9
fix typo in if-clause
2017-06-01 21:49:32 +08:00
09361d8499
update udevadmin work around ( #3038 )
2017-05-12 00:01:44 -05:00
0732afd02e
Merge branch 'master' into ZVM_XCAT_DEV
2017-05-01 13:22:51 -04:00
6617d7dfbd
work around installer hang for udevadm command in p9 pegas. ( #2953 )
2017-04-27 21:26:55 -05:00
7487c0322a
Merge branch 'master' into ZVM_XCAT_DEV
2017-04-24 09:39:38 -04:00
a761e64c0c
fix issue #2856 : [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later ( #2857 )
...
* fix issue [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later #2856
* fix issue [DEV] nodes provisioned with redhat osimages created by xCAT 2.12.3 or earlier missed yum repo to MN in xCAT 2.12.4 or later #2856
2017-04-13 11:31:54 +08:00
638d27fde8
Technical preview compute template for RHEL atomic
2017-03-29 10:57:08 -04:00
37f9e770f4
fix issue postscript fails and status=booted. #2665
2017-03-22 23:20:29 -04:00
0cda7b5d02
Fix double logging of postscript output in /var/log/xcat/xcat.log
2017-02-24 13:05:40 -08:00
5a83bf5e63
Merge our code with global xCAT team except for xcatws.cgi
...
Change-Id: I945c430685fa2febd914be09f6a6f976783abeec
2017-02-02 14:31:27 -05:00
c4a058c6d5
refine the conditional code logic on swith variables site table
2016-11-22 03:46:05 -05:00
1e6714a99d
fix issue when using copycds -p, stateful install has yum point to the wrong repository. #1852
2016-11-07 22:20:28 +08:00
6f735b0e8d
fix issue linux orderly shutdown not noticed by xcat. #1939;replace xcatpostinit1 sysvinit service with xcatpostinit1.service systemd service unit as the hook to run PS&PBS and report status for redhat;report node status on system <reboot/shutdown> command
2016-11-07 13:54:47 +08:00
e803d56405
Add an ignoredisk directive to the partitionfile
...
When installing, explicitly tell anaconda to only manipulate
$instdisk. Anaconda tends to be too aggressive about disks.
2016-10-14 08:13:17 -04:00
bbcea8b16d
fix differentiate the log entries of postscript and postbootscript ( #1946 )
2016-10-12 14:26:23 +08:00
4cf9c18fc7
Revert "differentiate the log entries of postscript and postbootscript " ( #1927 )
2016-09-29 17:27:59 +08:00
80c6c3c591
Merge pull request #1897 from immarvin/onissue
...
fix issue [FVT]: sed: can't read /boot/grub/grub.conf in servicenode log file #1730
2016-09-27 10:31:33 +08:00
e35ef729be
fix issue [FVT]: sed: can't read /boot/grub/grub.conf in servicenode log file #1730
2016-09-27 10:26:13 +08:00
e4c0d8c367
diff postscript and postbootscript log ( #1832 )
2016-09-27 10:20:00 +08:00
aeaf5a193c
Change rhels boot partition size from 256 MB to 512 MB
2016-09-26 10:46:03 -04:00
Jarrod Johnson
Bin Xu
zet809
immarvin
Samveen
Chuck Brazie
Matt Ezell
Gᴏɴɢ Jie
Bin Xu
Victor Hu
Yuan Bai
yangsong
Kilian Cavalotti
zVMopenstack
Chuck Brazie
penguhyang
Patrick Lundgren