215aecb5ab
man1 chages for commands a-n
2016-02-11 15:12:13 -05:00
03e359c460
Merge pull request #703 from gurevichmark/man8Fixes
...
man page fixes for man8 section
2016-02-09 15:47:03 -05:00
f832427afb
Merge pull request #690 from whowutwut/manpage
...
Improve the content in the xCAT kit related command man page, better formatting on RTD
2016-02-08 16:34:44 -05:00
b9dcd734c7
man page fixes for man8 section
2016-02-08 13:40:51 -05:00
d86989c9b5
man page changes to remove xcatconfig without any flags and fix EXAMPLES formatting
2016-02-03 16:45:58 -05:00
6d0b7fcecc
Merge pull request #637 from zet809/docker_support_usage_manpage
...
The usage and manpage for docker instance management command, mkdocke…
2016-01-26 14:10:44 +08:00
27b4471306
Change some formatting and wording for the bmcdiscover man page
2016-01-25 14:52:04 -05:00
b4c623f117
Make formatting changes in the kit related manpages.
2016-01-25 14:51:53 -05:00
79afc50693
The usage and manpage for docker instance management command, mkdocker,lsdocker,rmdocker,rpower
2016-01-25 08:46:57 -05:00
c6e663d1fd
Use fifo pipe to enhance getadapter
...
Currently the getadapter implementation store the nics information
in multiple files. This implementaion will store the records in the
database and add the following changes:
1. Add taskstate table to record the getadapter request.
2. Add route_request hook in xcatd to avoid of too much process.
3. Add adapterinfo column to keep the adapter information.
4. Use fifo pipe to send/recv the adapter message and wake up the waiting process.
5. Use alarm signal to handle the timeout event.
2016-01-25 01:53:54 -05:00
6dce0200d9
update the rst file about the rscan
2016-01-21 22:39:43 -05:00
c54481efc5
Merge pull request #534 from zet809/refine_find_install_disk
...
replace the determine install disk precess with script share/xcat/ins…
2015-12-28 15:45:07 +08:00
fdca2cc3f9
replace the determine install disk precess with script share/xcat/install/scripts/getinstdisk, it will write the install disk to /tmp/install_disk
2015-12-28 01:09:56 -05:00
fa28124b3d
update chvm manpage in doc
2015-12-22 04:36:25 -05:00
88b61bab04
Merge pull request #497 from xuweibj/S69370
...
Add FQDNfirst option in global cfg.
2015-12-16 17:07:16 +08:00
3684705279
Add a global cfg to enable the longnamefirst
2015-12-16 03:52:20 -05:00
82a348b160
Merge the pages for Large Cluster and Hierarchical
...
Realized that the large cluster support and the advanced hierarchical pages are the same.
This initial commit does some refactoring of the pages.
Left around the define_service_node.rst page but it's not in the index.
We need to verify that the content is correct in define_service_nodes.rst
2015-12-11 21:02:25 -05:00
6d3c230907
Convert pod to rst for rflash and addkitcomp
...
Upload rflash.rst and addkitcomp.rst which are converted from pod
by create_man_page.py.
2015-12-10 02:34:27 -05:00
ab5a9f227c
Found some more places where diskful was spelled with two l's
2015-12-08 11:51:06 -05:00
011651c2ac
update statefull and diskfull to stateful and diskful
...
for consistency in the documentaion and code
2015-12-08 11:43:56 -05:00
2b7831a258
Merge pull request #487 from zet809/refine_discovery_doc
...
add bmcsetup in discovery doc, add chain document in Advanced Topics …
2015-12-01 16:51:23 -05:00
02ceafc428
Add a attribute in site table to set the delay time for rflash
...
Currently abort failure(0x81) occur during the initiate stage as
the firmware state is not stable enough after cold reset. As the
delay time is not a constant value, this change add a interface in
site table for user to set this value.
Close-issue: #471
2015-11-30 03:59:31 -05:00
da3bb3038e
add bmcsetup in discovery doc, add chain document in Advanced Topics chapter
2015-11-28 09:34:04 -05:00
959716c399
fix issue 433: 2.11 build failed with renergy.1.pod
2015-11-19 01:57:35 -05:00
f997141422
Merge pull request #402 from zet809/renergy_for_power_s822l
...
renergy support for IBM power s822LC, add power_reading and temp_read…
2015-11-18 22:40:59 -05:00
6b20360b57
modify renergy manpage, add powerusage and temperature
2015-11-18 22:01:26 -05:00
7b16faec3c
Update detect_dhcpd.rst
...
Limit the horizontal scrolling to help the output display of the PDF
2015-11-17 11:44:08 -05:00
b37dd4bef0
Merge pull request #328 from whowutwut/sf_reference_cleanup
...
Remove references to sourceforge in xcat-core
2015-11-17 23:55:23 +08:00
3f1ce2257b
Update rmnodecfg.rst
2015-11-12 13:45:10 -05:00
5eea8e492a
Update rmblade.rst
2015-11-12 13:37:31 -05:00
6b304f6859
fixed rspconfig formatting in man page issue 263
2015-11-05 15:15:52 -05:00
a5b3f425fa
build the chvm manpage according to the pod changes
2015-11-02 22:00:09 -05:00
4bbb502763
Merge pull request #327 from whowutwut/tools
...
Move over the tools page off of SF to RTD
2015-10-28 09:47:00 +08:00
aed606c968
Update index.rst
...
Adding the man7 directory into the index file
2015-10-27 17:11:12 -04:00
8a39aa8aa5
Remove references to sourceforge in these files
2015-10-27 16:54:21 -04:00
5194dc2158
Move over the tools page off of SF to RTD
...
http://xcat.sourceforge.net/tools/README.html
2015-10-27 16:40:54 -04:00
c88a85e2b1
commit the man5 man pages generated from perl-xCAT
2015-10-23 22:57:52 -04:00
b37054d803
commit the man7 man pages generated from perl-xCAT
2015-10-23 22:56:54 -04:00
a464fb3048
Re-commit the man8 man pages
2015-10-23 22:42:31 -04:00
83e101c762
Re-commit the man5 man pages
2015-10-23 22:42:13 -04:00
0a81d0784f
Re-commit the man3 man pages
2015-10-23 22:41:56 -04:00
5ea80e13dc
Re-commit the man1 man pages
2015-10-23 22:41:28 -04:00
b6b8a5d50c
Modify the create_man_page script to generate the files into
...
the man1,man3,man5,man8 subdirectories. Created the index file to
display a glob of the generated rst files
2015-10-23 22:39:39 -04:00
8b72f41df0
Remove the manpages in references/man.
...
Going to organize by manpage type
2015-10-23 22:31:29 -04:00
1a35edf971
Adding a new script that will use pod2rst to create the rst files into xcat-core/docs
...
Check in the initial pages that are generated from the pods
Once these are in, will look into how to autopush changes from the xCAT build scripts
when POD files are changed. This seems to be the quickest way to get the man pages
into the documentaion at this point.
2015-09-30 15:37:12 -04:00
dfe749793c
Staging files under xcat-doc/doc to get moved to xcat-core project
2015-08-20 15:54:56 -04:00
