diff --git a/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst b/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
index 4c334720f..613070857 100644
--- a/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
+++ b/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
@@ -1,5 +1,28 @@
 PowerKVM
 ========
 
-Install PoweKVM
----------------
+Install PowerKVM 
+----------------
+
+The process to set up PowerKVM hypervisor with xCAT is the same with Diskfull installation. Prepare powerKVM iso, such as ibm-powerkvm-2.1.1.0-22.0-ppc64-gold-201410191558.iso, then refer to :ref:`diskful_installation` to install PowerKVM hypervisor.
+
+Check bridge setting after installation finished
+------------------------------------------------
+
+After PowerKVM hypervisor is installed successfully, you can get the bridge information: ::
+
+  # brctl show
+  bridge name     bridge id               STP enabled     interfaces
+  br0             8000.000000000000       no              eth0
+
+If the bridge show is not like above, it means that you may not run xCAT post install script. You can manually run following commands to create the bridge, for example: ::
+
+  IPADDR=10.1.101.1/16
+  brctl addbr br0
+  brctl addif br0 eth0
+  brctl setfd br0 0
+  ip addr add dev br0 $IPADDR
+  ip link set br0 up
+  ip addr del dev eth0 $IPADDR
+
+Note: During ubuntu LE virtual machines installation, the virtual machines need to access Internet, so make sure the PowerKVM hypervisor is able to access Internet.