From f83d5e0a19af9c8308506eb447b272e50acefc13 Mon Sep 17 00:00:00 2001 From: GONG Jie Date: Sun, 31 Dec 2017 23:59:59 +0000 Subject: [PATCH] Remove trailing spaces in file xCAT-client/pods/man1/chhypervisor.1.pod --- xCAT-client/pods/man1/chhypervisor.1.pod | 64 ++++++++++++------------ 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/xCAT-client/pods/man1/chhypervisor.1.pod b/xCAT-client/pods/man1/chhypervisor.1.pod index 5c7802dd6..83025a9ba 100644 --- a/xCAT-client/pods/man1/chhypervisor.1.pod +++ b/xCAT-client/pods/man1/chhypervisor.1.pod @@ -52,10 +52,10 @@ B I [B<--smcli> I I] The B command can be used to configure the RHEV-h. -The rhev-h host will register to the rhev-m automatically, but admin needs to +The rhev-h host will register to the rhev-m automatically, but admin needs to approve the host can be added to the 'cluster' with B<-a> flag . -After registering, the network interfaces of host need to be added to the 'network' of +After registering, the network interfaces of host need to be added to the 'network' of RHEV. And the power management for the host should be configured so that rhev-m could make proper decision when certain host encountered error. @@ -75,8 +75,8 @@ B - The rhev manager (The FQDN of rhev-m server) for the host. B - The configuration for the nics. Refer to B<-n>. -B - The cluster that the host will be added to. The -default is 'Default' cluster if not specified. +B - The cluster that the host will be added to. The +default is 'Default' cluster if not specified. =back @@ -94,45 +94,45 @@ Before approve, the status of the host must be 'pending_approval'. =item B<-n> Configure the network interfaces for the host. -Note: This operation only can be run when host is in 'maintenance mode'. +Note: This operation only can be run when host is in 'maintenance mode'. Use B<-d> to switch the host to 'maintenance' mode. The interfaces which configured in hypervisor.interface will be added to the network of RHEV. The format of hypervisor.interface is multiple [network:interfacename: -protocol:IP:netmask:gateway] sections separated with '|'. For example: +protocol:IP:netmask:gateway] sections separated with '|'. For example: [rhevm2:eth0:static:10.1.0.236:255.255.255.0:0.0.0.0]. =over 2 -B - The logic network which has been created by 'cfgve -t nw' +B - The logic network which has been created by 'cfgve -t nw' or the default management network 'rhevm'. B - Physical network name: 'eth0','eth1'... -B - To identify which boot protocol to use for the interface: dhcp +B - To identify which boot protocol to use for the interface: dhcp or static. B - The IP address for the interface. B - The network mask for the interface. -B - The gateay for the interface. This field only can be set when -the interface is added to 'rhevm' network. +B - The gateay for the interface. This field only can be set when +the interface is added to 'rhevm' network. =back =item B<-p> Configure the power management for the host. -The power management must be configured for the rhev-h host to make the -rhev-m to monitor the power status of the host, so that when certain host +The power management must be configured for the rhev-h host to make the +rhev-m to monitor the power status of the host, so that when certain host failed to function, rhev-m will fail over certain role like SPM to other active host. -For rack mounted server, the bmc IP and user:password need to be set for the -power management (These parameters are gotten from ipmi table). rhev-m uses the -ipmi protocol to get the power status of the host. +For rack mounted server, the bmc IP and user:password need to be set for the +power management (These parameters are gotten from ipmi table). rhev-m uses the +ipmi protocol to get the power status of the host. =item B<-e> To activate the host. @@ -151,9 +151,9 @@ Display usage message. =item B<--adddisk2pool> I I I I -Add a disk to a disk pool defined in the EXTENT CONTROL. Function type can be -either: (4) Define region as full volume and add to group OR (5) Add existing -region to group. If the volume already exists in the EXTENT CONTROL, use +Add a disk to a disk pool defined in the EXTENT CONTROL. Function type can be +either: (4) Define region as full volume and add to group OR (5) Add existing +region to group. If the volume already exists in the EXTENT CONTROL, use function 5. If the volume does not exist in the EXTENT CONTROL, but is attached to SYSTEM, use function 4. @@ -171,15 +171,15 @@ Create a virtual switch. =item B<--addzfcp2pool> I I I I I I -Add a zFCP device to a device pool defined in xCAT. The device must have been -carved up in the storage controller and configured with a WWPN/LUN before it -can be added to the xCAT storage pool. z/VM does not have the ability to +Add a zFCP device to a device pool defined in xCAT. The device must have been +carved up in the storage controller and configured with a WWPN/LUN before it +can be added to the xCAT storage pool. z/VM does not have the ability to communicate directly with the storage controller to carve up disks dynamically. =item B<--removediskfrompool> I I I -Remove a disk from a disk pool defined in the EXTENT CONTROL. Function type can -be either: (1) Remove region, (2) Remove region from group, (3) Remove region +Remove a disk from a disk pool defined in the EXTENT CONTROL. Function type can +be either: (1) Remove region, (2) Remove region from group, (3) Remove region from all groups, OR (7) Remove entire group . =item B<--removescsi> I I @@ -200,11 +200,11 @@ Remove a zFCP device from a device pool defined in xCAT. =item B<--smcli> I I -Execute a SMAPI function. A list of APIs supported can be found by using the -help flag, e.g. chhypervisor pokdev61 --smcli -h. Specific arguments associated -with a SMAPI function can be found by using the help flag for the function, -e.g. chhypervisor pokdev61 --smcli Image_Query_DM -h. Only z/VM 6.2 and older -SMAPI functions are supported at this time. Additional SMAPI functions will be +Execute a SMAPI function. A list of APIs supported can be found by using the +help flag, e.g. chhypervisor pokdev61 --smcli -h. Specific arguments associated +with a SMAPI function can be found by using the help flag for the function, +e.g. chhypervisor pokdev61 --smcli Image_Query_DM -h. Only z/VM 6.2 and older +SMAPI functions are supported at this time. Additional SMAPI functions will be added in subsequent zHCP versions. =back @@ -256,22 +256,22 @@ To deactivate the host 'host1', enter: To add a disk to a disk pool defined in the EXTENT CONTROL, enter: chhypervisor pokdev61 --adddisk2pool 4 DM1234 DM1234 POOL1 - + =item 2. To add a zFCP device to a device pool defined in xCAT, enter: chhypervisor pokdev61 --addzfcp2pool zfcp1 free 500501234567C890 4012345600000000 8G - + =item 3. To remove a region from a group in the EXTENT CONTROL, enter: chhypervisor pokdev61 --removediskfrompool 2 DM1234 POOL1 - + =item 4. To remove a zFCP device from a device pool defined in xCAT, enter: chhypervisor pokdev61 --removezfcpfrompool zfcp1 4012345600000000 500501234567C890 - + =item 5. To execute a SMAPI function (Image_Query_DM), enter: