diff --git a/docs/source/guides/admin-guides/references/man1/addkit.1.rst b/docs/source/guides/admin-guides/references/man1/addkit.1.rst index 7c64c139e..fa619d809 100644 --- a/docs/source/guides/admin-guides/references/man1/addkit.1.rst +++ b/docs/source/guides/admin-guides/references/man1/addkit.1.rst @@ -11,7 +11,7 @@ NAME **** -\ **addkit**\ - Adds product software Kits to an xCAT cluster environmnet. +\ **addkit**\ - Adds product software Kits to an xCAT cluster environment. ******** diff --git a/docs/source/guides/admin-guides/references/man1/addkitcomp.1.rst b/docs/source/guides/admin-guides/references/man1/addkitcomp.1.rst index 16a43358a..3d4785a02 100644 --- a/docs/source/guides/admin-guides/references/man1/addkitcomp.1.rst +++ b/docs/source/guides/admin-guides/references/man1/addkitcomp.1.rst @@ -128,7 +128,7 @@ EXAMPLES addkitcomp -a -i rhels6.2-ppc64-netboot-compute comp-test2-1.0-1-rhels-6.2-ppc64 -3. To add a kit component to osimage with incompatable osarch, osversion or ostype, use the -f (force) option: +3. To add a kit component to osimage with incompatible osarch, osversion or ostype, use the -f (force) option: .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/chhypervisor.1.rst b/docs/source/guides/admin-guides/references/man1/chhypervisor.1.rst index fdcfa8b50..0d78452a6 100644 --- a/docs/source/guides/admin-guides/references/man1/chhypervisor.1.rst +++ b/docs/source/guides/admin-guides/references/man1/chhypervisor.1.rst @@ -132,7 +132,7 @@ RHEV specific : \ **netmask**\ - The network mask for the interface. - \ **gateway**\ - The gateay for the interface. This field only can be set when + \ **gateway**\ - The gateway for the interface. This field only can be set when the interface is added to 'rhevm' network. diff --git a/docs/source/guides/admin-guides/references/man1/chvm.1.rst b/docs/source/guides/admin-guides/references/man1/chvm.1.rst index 71cbb7d55..e82affe95 100644 --- a/docs/source/guides/admin-guides/references/man1/chvm.1.rst +++ b/docs/source/guides/admin-guides/references/man1/chvm.1.rst @@ -446,7 +446,7 @@ zVM specific: carved up in the storage controller and configured with a WWPN/LUN before it can be added to the xCAT storage pool. z/VM does not have the ability to communicate directly with the storage controller to carve up disks dynamically. xCAT will - find the a zFCP device in the specified pool that meets the size required, if + find a zFCP device in the specified pool that meets the size required, if the WWPN and LUN are not given. The device address can be automatically assigned by specifying 'auto'. The WWPN/LUN can be set as the LOADDEV in the directory entry if (1) is specified as the 'loaddev'. diff --git a/docs/source/guides/admin-guides/references/man1/imgcapture.1.rst b/docs/source/guides/admin-guides/references/man1/imgcapture.1.rst index 663064609..cc3c56e6e 100644 --- a/docs/source/guides/admin-guides/references/man1/imgcapture.1.rst +++ b/docs/source/guides/admin-guides/references/man1/imgcapture.1.rst @@ -140,7 +140,7 @@ RETRUN VALUE ************ -0 The command completed sucessfully. +0 The command completed successfully. 1 An error has occurred. diff --git a/docs/source/guides/admin-guides/references/man1/imgexport.1.rst b/docs/source/guides/admin-guides/references/man1/imgexport.1.rst index 3481b300d..f1e08b682 100644 --- a/docs/source/guides/admin-guides/references/man1/imgexport.1.rst +++ b/docs/source/guides/admin-guides/references/man1/imgexport.1.rst @@ -61,7 +61,7 @@ For statelite: where x is the name of the profile. -Any files specified by the \ **-e**\ flag will also be exported. If \ **-p**\ flag is specified, the names of the postscripts and the postbootscripts for the given node will be exported. The postscripts themselves need to be manualy exported using \ **-e**\ flag. +Any files specified by the \ **-e**\ flag will also be exported. If \ **-p**\ flag is specified, the names of the postscripts and the postbootscripts for the given node will be exported. The postscripts themselves need to be manually exported using \ **-e**\ flag. For statelite, the litefile table settings for the image will also be exported. The litetree and statelite tables are not exported. diff --git a/docs/source/guides/admin-guides/references/man1/lskit.1.rst b/docs/source/guides/admin-guides/references/man1/lskit.1.rst index 07081e15d..88b38f19b 100644 --- a/docs/source/guides/admin-guides/references/man1/lskit.1.rst +++ b/docs/source/guides/admin-guides/references/man1/lskit.1.rst @@ -48,7 +48,7 @@ OPTIONS \ **-F|-**\ **-framework**\ \ *kit_path_name*\ - Use this option to display the framework values of the specified Kit tarfile. This information is retreived directly from the tarfile and can be done before the Kit has been defined in the xCAT database. This option cannot be combined with other options. + Use this option to display the framework values of the specified Kit tarfile. This information is retrieved directly from the tarfile and can be done before the Kit has been defined in the xCAT database. This option cannot be combined with other options. diff --git a/docs/source/guides/admin-guides/references/man1/makentp.1.rst b/docs/source/guides/admin-guides/references/man1/makentp.1.rst index 766e8109b..16a259df4 100644 --- a/docs/source/guides/admin-guides/references/man1/makentp.1.rst +++ b/docs/source/guides/admin-guides/references/man1/makentp.1.rst @@ -43,7 +43,7 @@ OPTIONS \ **-a|-**\ **-all**\ - Setup NTP servers for both management node and the service node. If management node has SLES installed and used as \ *ntpservers*\ , it is recommanded to use the \ *setupntp*\ postscript to set up NTP server for service nodes. + Setup NTP servers for both management node and the service node. If management node has SLES installed and used as \ *ntpservers*\ , it is recommended to use the \ *setupntp*\ postscript to set up NTP server for service nodes. diff --git a/docs/source/guides/admin-guides/references/man1/mknimimage.1.rst b/docs/source/guides/admin-guides/references/man1/mknimimage.1.rst index a8b7596e0..60b523f31 100644 --- a/docs/source/guides/admin-guides/references/man1/mknimimage.1.rst +++ b/docs/source/guides/admin-guides/references/man1/mknimimage.1.rst @@ -79,11 +79,11 @@ To list the contents of the xCAT osimage definition use the xCAT \ **lsdef**\ c To check the validity of a SPOT or lpp_source resource -To remove an xCAT osimage definition along with the associated NIM resource definitions use the \ **rmnimimage**\ command. Be careful not to accidently remove NIM resources if they are still needed. +To remove an xCAT osimage definition along with the associated NIM resource definitions use the \ **rmnimimage**\ command. Be careful not to accidentally remove NIM resources if they are still needed. To list a NIM resource definition use the AIX \ **lsnim**\ command ("lsnim -l "). -To check the validity of a SPOT or lpp_source resource use the AIX \ **nim**\ command ("nim -o check "). +To check the validity of a SPOT or lpp_source resource use the AIX \ **nim**\ command ("nim -o check "). To remove specific NIM resource definitions use the AIX \ **nim**\ command. ("nim -o remove "). diff --git a/docs/source/guides/admin-guides/references/man1/mkvm.1.rst b/docs/source/guides/admin-guides/references/man1/mkvm.1.rst index 25cbab798..66884c9b1 100644 --- a/docs/source/guides/admin-guides/references/man1/mkvm.1.rst +++ b/docs/source/guides/admin-guides/references/man1/mkvm.1.rst @@ -150,7 +150,7 @@ OPTIONS To specify the parameters which are used to create a partition. The \ *vmcpus*\ , \ *vmmemory*\ are necessary, and the value specified with this command have a more high priority. If the value of any of the three options is not specified, the corresponding value specified for the node object will be used. If any of the three attributes is neither specified with this command nor specified with the node object, error information will be returned. To reference to lsvm(1)|lsvm.1 for more information about 'drc_index' for \ *vmphyslots*\ . - The option \ *vios*\ is used to specify the partition that will be created is a VIOS partition. If specified, the value for \ *vmstorage*\ shall be number which indicate the number of vSCSI server adapter will be created, and if no value specified for \ *vmphyslots*\ , all the physical slot of the power machine will be asigned to VIOS partition. If not specified, it shall be in form of \ *vios_name:server_slotid*\ to specify the vios and the virtual slot id of the vSCSI server adapter that will be connected from the Logical partition. + The option \ *vios*\ is used to specify the partition that will be created is a VIOS partition. If specified, the value for \ *vmstorage*\ shall be number which indicate the number of vSCSI server adapter will be created, and if no value specified for \ *vmphyslots*\ , all the physical slot of the power machine will be assigned to VIOS partition. If not specified, it shall be in form of \ *vios_name:server_slotid*\ to specify the vios and the virtual slot id of the vSCSI server adapter that will be connected from the Logical partition. diff --git a/docs/source/guides/admin-guides/references/man1/monstart.1.rst b/docs/source/guides/admin-guides/references/man1/monstart.1.rst index 1595b28b8..2d182ba55 100644 --- a/docs/source/guides/admin-guides/references/man1/monstart.1.rst +++ b/docs/source/guides/admin-guides/references/man1/monstart.1.rst @@ -51,7 +51,7 @@ OPTIONS \ **-h | -**\ **-help**\ Display usage message. -\ **-r | -**\ **-remote**\ Specifies that the operation will also be performed on the nodes. For example, the3rd party monitoring software daemons on the nodes will also be started. +\ **-r | -**\ **-remote**\ Specifies that the operation will also be performed on the nodes. For example, the 3rd party monitoring software daemons on the nodes will also be started. \ **-v | -**\ **-version**\ Command Version. diff --git a/docs/source/guides/admin-guides/references/man1/monstop.1.rst b/docs/source/guides/admin-guides/references/man1/monstop.1.rst index 4a0502ba4..28d4e0e95 100644 --- a/docs/source/guides/admin-guides/references/man1/monstop.1.rst +++ b/docs/source/guides/admin-guides/references/man1/monstop.1.rst @@ -51,7 +51,7 @@ OPTIONS \ **-h | -help**\ Display usage message. -\ **-r | -**\ **-remote**\ Specifies that the operation will also be performed on the nodes. For example, the3rd party monitoring software daemons on the nodes will also be stopped. +\ **-r | -**\ **-remote**\ Specifies that the operation will also be performed on the nodes. For example, the 3rd party monitoring software daemons on the nodes will also be stopped. \ **-v | -version**\ Command Version. diff --git a/docs/source/guides/admin-guides/references/man1/pcons.1.rst b/docs/source/guides/admin-guides/references/man1/pcons.1.rst index 25cd3dce7..0c83d815b 100644 --- a/docs/source/guides/admin-guides/references/man1/pcons.1.rst +++ b/docs/source/guides/admin-guides/references/man1/pcons.1.rst @@ -25,7 +25,7 @@ DESCRIPTION *********** -Runs the a command to the noderange using the console. +Runs a command to the noderange using the console. ******** diff --git a/docs/source/guides/admin-guides/references/man1/renergy.1.rst b/docs/source/guides/admin-guides/references/man1/renergy.1.rst index 59917da15..d5ce65656 100644 --- a/docs/source/guides/admin-guides/references/man1/renergy.1.rst +++ b/docs/source/guides/admin-guides/references/man1/renergy.1.rst @@ -567,7 +567,7 @@ so no additional plugins are needed for BladeCenter.) module node. Note: for the attribute without the leading 'pd1' which - means there's only one power doamin in the chassis. + means there's only one power domain in the chassis. @@ -870,7 +870,7 @@ so no additional plugins are needed for BladeCenter.) -5. Query all the attirbutes for blade server node blade1. +5. Query all the attributes for blade server node blade1. .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/rflash.1.rst b/docs/source/guides/admin-guides/references/man1/rflash.1.rst index 0bad888ca..f11497991 100644 --- a/docs/source/guides/admin-guides/references/man1/rflash.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rflash.1.rst @@ -106,7 +106,7 @@ Any previously activated code on the affected systems will be automatically acce \ **IMPORTANT!**\ If the power subsystem is recycled, all of its attached managed systems will be recycled. -If it outputs \ **"Timeout waiting for prompt"**\ during the upgrade, set the \ **"ppctimeout"**\ larger in the \ **site**\ table. After the upgrade, remeber to change it back. If run the \ **"rflash"**\ command on an AIX management node, need to make sure the value of \ **"useSSHonAIX"**\ is \ **"yes"**\ in the site table. +If it outputs \ **"Timeout waiting for prompt"**\ during the upgrade, set the \ **"ppctimeout"**\ larger in the \ **site**\ table. After the upgrade, remember to change it back. If run the \ **"rflash"**\ command on an AIX management node, need to make sure the value of \ **"useSSHonAIX"**\ is \ **"yes"**\ in the site table. PPC (using Direct FSP Management) specific: @@ -170,7 +170,7 @@ To apply the firmware level, a reboot is required to BMC and HOST. \ **-d**\ : -This option steamlines the update, activate, reboot BMC and reboot HOST procedure. It expects a directory containing both BMC and Host .tar files. When BMC and Host tar files are provided, the command will upload and activate firmware. After BMC becomes activate, it will reboot BMC. If BMC state is Ready, the command will reboot the HOST. If BMC state is NotReady, the command will exit. +This option streamlines the update, activate, reboot BMC and reboot HOST procedure. It expects a directory containing both BMC and Host .tar files. When BMC and Host tar files are provided, the command will upload and activate firmware. After BMC becomes activate, it will reboot BMC. If BMC state is Ready, the command will reboot the HOST. If BMC state is NotReady, the command will exit. \ **-**\ **-delete**\ : @@ -345,7 +345,7 @@ This delete option will delete update image from BMC. It expects an ID as the in rflash fs3 /firmware/8335_810.1543.20151021b_update.hpm - Print verbose message to rflash log file (/var/log/xcat/rflash/fs3.log) when updading firmware: + Print verbose message to rflash log file (/var/log/xcat/rflash/fs3.log) when updating firmware: .. code-block:: perl @@ -365,7 +365,7 @@ This delete option will delete update image from BMC. It expects an ID as the in -7. To update the firmware on the OpenBMC machine, specify the firmare update file to upload and activate: +7. To update the firmware on the OpenBMC machine, specify the firmware update file to upload and activate: .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/rmkitcomp.1.rst b/docs/source/guides/admin-guides/references/man1/rmkitcomp.1.rst index 183372691..b9ff06292 100644 --- a/docs/source/guides/admin-guides/references/man1/rmkitcomp.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rmkitcomp.1.rst @@ -136,7 +136,7 @@ Output is similar to: kitcomponents comp-test1-1.0-1-rhels-6.2-ppc64 were removed from osimage rhels6.2-ppc64-netboot-compute successfully -3. To remove a kit component from osimage and also remove the kit component meta RPM and package RPM. So in next genimage for statelss image and updatenode for stateful nodes, the kit component meta RPM and package RPM will be uninstalled. +3. To remove a kit component from osimage and also remove the kit component meta RPM and package RPM. So in next genimage for stateless image and updatenode for stateful nodes, the kit component meta RPM and package RPM will be uninstalled. .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/rmnimimage.1.rst b/docs/source/guides/admin-guides/references/man1/rmnimimage.1.rst index f6b6ffe7a..56fc84f2f 100644 --- a/docs/source/guides/admin-guides/references/man1/rmnimimage.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rmnimimage.1.rst @@ -66,7 +66,7 @@ OPTIONS \ **-d|-**\ **-delete**\ - Delete any files or directories that were left after the "nim -o remove" command was run. This option will also remove the lpp_source resouce and all files contained in the lpp_source directories. When this command completes all definitions and files will be completely erased so use with caution! + Delete any files or directories that were left after the "nim -o remove" command was run. This option will also remove the lpp_source resource and all files contained in the lpp_source directories. When this command completes all definitions and files will be completely erased so use with caution! diff --git a/docs/source/guides/admin-guides/references/man1/rnetboot.1.rst b/docs/source/guides/admin-guides/references/man1/rnetboot.1.rst index 866e10306..f4f959c95 100644 --- a/docs/source/guides/admin-guides/references/man1/rnetboot.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rnetboot.1.rst @@ -66,7 +66,7 @@ Note: if the "val" fields includes spaces or any other characters that will be p \ **-r**\ -specify the number of retries that the monitoring process will perform before declaring the failure. The default value is 3. Setting the retrycount to 0 means only monitoring the os installation progress and will not re-initiate the installation if the node status has not been changed to the expected value after timeout. This flag must be used with -m flag. +Specify the number of retries that the monitoring process will perform before declaring the failure. The default value is 3. Setting the retrycount to 0 means only monitoring the os installation progress and will not re-initiate the installation if the node status has not been changed to the expected value after timeout. This flag must be used with -m flag. \ **-t**\ diff --git a/docs/source/guides/admin-guides/references/man1/rscan.1.rst b/docs/source/guides/admin-guides/references/man1/rscan.1.rst index 9d6ff5082..17049d511 100644 --- a/docs/source/guides/admin-guides/references/man1/rscan.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rscan.1.rst @@ -250,7 +250,7 @@ Output is similar to: fsp Server-9125-F2A-SN0262672-B 3 9125-F2A 0262672 192.168.200.243 -5. To collects the node information from one or more hardware control points on zVM AND populate the database with details collected by rscan: +5. To collect the node information from one or more hardware control points on zVM AND populate the database with details collected by rscan: .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/rspconfig.1.rst b/docs/source/guides/admin-guides/references/man1/rspconfig.1.rst index 70deaa8c0..54a8f4a97 100644 --- a/docs/source/guides/admin-guides/references/man1/rspconfig.1.rst +++ b/docs/source/guides/admin-guides/references/man1/rspconfig.1.rst @@ -342,13 +342,13 @@ OPTIONS \ **frame**\ ={\ *framenumber*\ | \*} - Set or get frame number. If no framenumber and \* specified, framenumber for the nodes will be displayed and updated in xCAAT database. If framenumber is specified, it only supports single node and the framenumber will be set for that frame. If \* is specified, it supports noderange and all the frame numbers for the noderange will be read from xCAT database and set to frames. Setting the frame number is a disruptive command which requires all CECs to be powered off prior to issuing the command. + Set or get frame number. If no framenumber and \* specified, framenumber for the nodes will be displayed and updated in the xCAT database. If framenumber is specified, it only supports single node and the framenumber will be set for that frame. If \* is specified, it supports noderange and all the frame numbers for the noderange will be read from xCAT database and set to frames. Setting the frame number is a disruptive command which requires all CECs to be powered off prior to issuing the command. \ **cec_off_policy**\ ={\ **poweroff | stayon**\ } - Set or get cec off policy after lpars are powered off. If no cec_off_policy value specified, the cec_off_policy for the nodes will be displayed. the cec_off_policy has two values: \ **poweroff**\ and \ **stayon**\ . \ **poweroff**\ means Power off when last partition powers off. \ **stayon**\ means Stay running after last partition powers off. If cec_off_policy value is specified, the cec off policy will be set for that cec. + Set or get cec off policy after lpars are powered off. If no cec_off_policy value specified, the cec_off_policy for the nodes will be displayed. The cec_off_policy has two values: \ **poweroff**\ and \ **stayon**\ . \ **poweroff**\ means Power off when last partition powers off. \ **stayon**\ means Stay running after last partition powers off. If cec_off_policy value is specified, the cec off policy will be set for that cec. @@ -670,7 +670,7 @@ OPTIONS \ **sysname**\ - Query or set sysname for CEC or Frame. If no value specified, means to query sysname of the specified nodes. If '\*' specified, it means to set sysname for the specified nodes, and the sysname values would get from xCAT datebase. If a string is specified, it means to use the string as sysname value to set for the specified node. + Query or set sysname for CEC or Frame. If no value specified, means to query sysname of the specified nodes. If '\*' specified, it means to set sysname for the specified nodes, and the sysname values would get from xCAT database. If a string is specified, it means to use the string as sysname value to set for the specified node. diff --git a/docs/source/guides/admin-guides/references/man1/sinv.1.rst b/docs/source/guides/admin-guides/references/man1/sinv.1.rst index f6d94768a..78db84d66 100644 --- a/docs/source/guides/admin-guides/references/man1/sinv.1.rst +++ b/docs/source/guides/admin-guides/references/man1/sinv.1.rst @@ -94,7 +94,7 @@ Command Protocol can be used. See man \ **xdsh**\ for more details. which will automatically build the template for you from the seed node named. - If a a seed node is not provided, then command will automatically use the first node in the noderange as + If a seed node is not provided, then command will automatically use the first node in the noderange as the seed node. diff --git a/docs/source/guides/admin-guides/references/man1/snmove.1.rst b/docs/source/guides/admin-guides/references/man1/snmove.1.rst index f797e30d4..834d0aca0 100644 --- a/docs/source/guides/admin-guides/references/man1/snmove.1.rst +++ b/docs/source/guides/admin-guides/references/man1/snmove.1.rst @@ -126,7 +126,7 @@ OPTIONS \ **-s|-**\ **-source**\ - Specifies the hostname of the current (source) service node sa known by (facing) the management node. + Specifies the hostname of the current (source) service node as known by (facing) the management node. diff --git a/docs/source/guides/admin-guides/references/man1/switchdiscover.1.rst b/docs/source/guides/admin-guides/references/man1/switchdiscover.1.rst index 2472d8d51..a94e8857b 100644 --- a/docs/source/guides/admin-guides/references/man1/switchdiscover.1.rst +++ b/docs/source/guides/admin-guides/references/man1/switchdiscover.1.rst @@ -173,7 +173,7 @@ EXAMPLES -4. To process switch-based switch discovery, the core switch has to be configured and top-of-rack (edge) switch has to be predefine into xCAT databse with attribute \ **switch**\ and \ **switchport**\ to core switch: +4. To process switch-based switch discovery, the core switch has to be configured and top-of-rack (edge) switch has to be predefine into xCAT database with attribute \ **switch**\ and \ **switchport**\ to core switch: .. code-block:: perl diff --git a/docs/source/guides/admin-guides/references/man1/unregnotif.1.rst b/docs/source/guides/admin-guides/references/man1/unregnotif.1.rst index a61c02d17..2d9bf5178 100644 --- a/docs/source/guides/admin-guides/references/man1/unregnotif.1.rst +++ b/docs/source/guides/admin-guides/references/man1/unregnotif.1.rst @@ -11,7 +11,7 @@ NAME **** -\ **unregnotif**\ - unregister a Perl module or a command that was watching for the changes of the desired xCAT database tables. +\ **unregnotif**\ - unregister a Perl module or a command that was watching for the changes of the desired xCAT database tables. ******** diff --git a/docs/source/guides/admin-guides/references/man1/xcatchroot.1.rst b/docs/source/guides/admin-guides/references/man1/xcatchroot.1.rst index c6507141f..293fb7e54 100644 --- a/docs/source/guides/admin-guides/references/man1/xcatchroot.1.rst +++ b/docs/source/guides/admin-guides/references/man1/xcatchroot.1.rst @@ -38,7 +38,7 @@ definition and the command that you wish to have run in the spot. Be very careful when using this command!!! Make sure you are very clear about exactly what you are changing so that you do -not accidently corrupt the image. +not accidentally corrupt the image. As a precaution it is advisable to make a copy of the original spot in case your changes wind up corrupting the image. diff --git a/docs/source/guides/admin-guides/references/man1/xdsh.1.rst b/docs/source/guides/admin-guides/references/man1/xdsh.1.rst index f34c84a6b..5c369cf30 100644 --- a/docs/source/guides/admin-guides/references/man1/xdsh.1.rst +++ b/docs/source/guides/admin-guides/references/man1/xdsh.1.rst @@ -231,7 +231,7 @@ running commands, are terminated (SIGTERM). of relevant device configuration file. The devicetype value must correspond to a valid device configuration file. xCAT ships some default configuration files - for Ethernet switches and and IB switches under + for Ethernet switches and IB switches under \ */opt/xcat/share/xcat/devicetype*\ directory. If you want to overwrite any of the configuration files, copy them to \ */var/opt/xcat/*\ directory and customize. diff --git a/docs/source/guides/admin-guides/references/man3/noderange.3.rst b/docs/source/guides/admin-guides/references/man3/noderange.3.rst index 4ec99e826..7c72ab9d2 100644 --- a/docs/source/guides/admin-guides/references/man3/noderange.3.rst +++ b/docs/source/guides/admin-guides/references/man3/noderange.3.rst @@ -172,7 +172,7 @@ right sides: Any combination or multiple combinations of inclusive and exclusive ranges of nodes and groups is legal. There is no precedence implied in the order of the arguments. Exclusive ranges have precedence over -inclusive. Parentheses can be used to explicitly specify precendence of any operators. +inclusive. Parentheses can be used to explicitly specify precedence of any operators. Nodes have precedence over groups. If a node range match is made then no group range match will be attempted. @@ -194,7 +194,7 @@ Throughout this man page the term \ **xCAT Node Name Format**\ is used. In plain English, a node or group name is in \ **xCAT Node Name Format**\ if starting -from the begining there are: +from the beginning there are: \* one or more alpha characters of any case and any number of "-" in any combination