diff --git a/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst b/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
index 613070857..cef4e2e05 100644
--- a/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
+++ b/docs/source/guides/admin-guides/manage_clusters/ppc64le/virtual_machines/powerKVM.rst
@@ -6,16 +6,16 @@ Install PowerKVM
 
 The process to set up PowerKVM hypervisor with xCAT is the same with Diskfull installation. Prepare powerKVM iso, such as ibm-powerkvm-2.1.1.0-22.0-ppc64-gold-201410191558.iso, then refer to :ref:`diskful_installation` to install PowerKVM hypervisor.
 
-Check bridge setting after installation finished
-------------------------------------------------
+Verifying hypervisor bridges
+----------------------------
 
-After PowerKVM hypervisor is installed successfully, you can get the bridge information: ::
+After PowerKVM hypervisor is installed successfully, you can get the bridge information by running ``brctl show``: ::
 
   # brctl show
   bridge name     bridge id               STP enabled     interfaces
   br0             8000.000000000000       no              eth0
 
-If the bridge show is not like above, it means that you may not run xCAT post install script. You can manually run following commands to create the bridge, for example: ::
+If there are no bridges configured, the xCAT post install script will not work. You must manually create a bridge. The following is provided as an example for creating a bridge bro using interface eth0 with IP address: 10.1.101.1/16, for example: ::
 
   IPADDR=10.1.101.1/16
   brctl addbr br0
@@ -25,4 +25,4 @@ If the bridge show is not like above, it means that you may not run xCAT post in
   ip link set br0 up
   ip addr del dev eth0 $IPADDR
 
-Note: During ubuntu LE virtual machines installation, the virtual machines need to access Internet, so make sure the PowerKVM hypervisor is able to access Internet.
+Note: During any of ubuntu installation, the virtual machines need to access Internet, so make sure the PowerKVM hypervisor is able to access Internet.