mirror of
https://github.com/xcat2/xcat-core.git
synced 2025-10-31 03:12:30 +00:00
Use ext4 filesystem instead of ext3
This commit is contained in:
Mark Gurevich
@@ -499,13 +499,13 @@ The operating system is installed on the internal disks.
|
||||
|
||||
#. Create file systems on shared disks
|
||||
|
||||
Run the ``mkfs.ext3`` command on the primary management node to create file systems on the shared disk that will contain the xCAT data. For example: ::
|
||||
Run the ``mkfs.ext4`` command on the primary management node to create file systems on the shared disk that will contain the xCAT data. For example: ::
|
||||
|
||||
mkfs.ext3 -v /dev/sdc1
|
||||
mkfs.ext3 -v /dev/sdc2
|
||||
mkfs.ext3 -v /dev/sdc3
|
||||
mkfs.ext3 -v /dev/sdc4
|
||||
mkfs.ext3 -v /dev/sdc5
|
||||
mkfs.ext4 -v /dev/sdc1
|
||||
mkfs.ext4 -v /dev/sdc2
|
||||
mkfs.ext4 -v /dev/sdc3
|
||||
mkfs.ext4 -v /dev/sdc4
|
||||
mkfs.ext4 -v /dev/sdc5
|
||||
|
||||
If you place entries for the disk in ``/etc/fstab``, which is not required, ensure that the entries do not have the system automatically mount the disk.
|
||||
|
||||
|
||||
@@ -107,7 +107,7 @@ Here is partition definition file example for SLES standard partition in X86_64
|
||||
</partition>
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">true</format>
|
||||
<mount>/</mount>
|
||||
<mountby config:type="symbol">path</mountby>
|
||||
@@ -131,7 +131,7 @@ The following is an example of a partition definition file for a SLES LVM Partit
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<crypt_fs config:type="boolean">false</crypt_fs>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">true</format>
|
||||
<loop_fs config:type="boolean">false</loop_fs>
|
||||
<mountby config:type="symbol">device</mountby>
|
||||
@@ -148,7 +148,7 @@ The following is an example of a partition definition file for a SLES LVM Partit
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<crypt_fs config:type="boolean">false</crypt_fs>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">true</format>
|
||||
<loop_fs config:type="boolean">false</loop_fs>
|
||||
<mount>/boot</mount>
|
||||
@@ -211,7 +211,7 @@ The following is an example of a partition definition file for a SLES LVM Partit
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<crypt_fs config:type="boolean">false</crypt_fs>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">true</format>
|
||||
<loop_fs config:type="boolean">false</loop_fs>
|
||||
<lv_name>root</lv_name>
|
||||
@@ -248,7 +248,7 @@ Here is partition definition file example for SLES standard partition in ppc64 m
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<crypt_fs config:type="boolean">false</crypt_fs>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">false</format>
|
||||
<loop_fs config:type="boolean">false</loop_fs>
|
||||
<mountby config:type="symbol">device</mountby>
|
||||
@@ -274,7 +274,7 @@ Here is partition definition file example for SLES standard partition in ppc64 m
|
||||
<partition>
|
||||
<create config:type="boolean">true</create>
|
||||
<crypt_fs config:type="boolean">false</crypt_fs>
|
||||
<filesystem config:type="symbol">ext3</filesystem>
|
||||
<filesystem config:type="symbol">ext4</filesystem>
|
||||
<format config:type="boolean">true</format>
|
||||
<fstopt>acl,user_xattr</fstopt>
|
||||
<loop_fs config:type="boolean">false</loop_fs>
|
||||
@@ -328,19 +328,19 @@ Here is partition definition file example for Ubuntu standard partition in x86_6
|
||||
filesystem{ vfat }
|
||||
mountpoint{ /boot/efi } .
|
||||
|
||||
256 256 512 ext3
|
||||
256 256 512 ext4
|
||||
$primary{ }
|
||||
method{ format }
|
||||
format{ }
|
||||
use_filesystem{ }
|
||||
filesystem{ ext3 }
|
||||
filesystem{ ext4 }
|
||||
mountpoint{ /boot } .
|
||||
|
||||
64 512 300% linux-swap
|
||||
method{ swap }
|
||||
format{ } .
|
||||
|
||||
512 1024 4096 ext3
|
||||
512 1024 4096 ext4
|
||||
$primary{ }
|
||||
method{ format }
|
||||
format{ }
|
||||
@@ -348,7 +348,7 @@ Here is partition definition file example for Ubuntu standard partition in x86_6
|
||||
filesystem{ ext4 }
|
||||
mountpoint{ / } .
|
||||
|
||||
100 10000 1000000000 ext3
|
||||
100 10000 1000000000 ext4
|
||||
method{ format }
|
||||
format{ }
|
||||
use_filesystem{ }
|
||||
@@ -403,7 +403,7 @@ Here is an example of the partition script on RedHat and SLES, the partitioning
|
||||
else
|
||||
FSTYPE=ext3
|
||||
fi
|
||||
BOOTFSTYPE=ext3
|
||||
BOOTFSTYPE=ext4
|
||||
EFIFSTYPE=vfat
|
||||
if uname -r|grep ^3.*el7 > /dev/null; then
|
||||
FSTYPE=xfs
|
||||
@@ -438,12 +438,12 @@ The following is an example of the partition script on Ubuntu, the partitioning
|
||||
echo " ." >> /tmp/partitionfile
|
||||
else
|
||||
echo "ubuntu-boot ::" > /tmp/partitionfile
|
||||
echo "100 50 100 ext3" >> /tmp/partitionfile
|
||||
echo ' $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot }' >> /tmp/partitionfile
|
||||
echo "100 50 100 ext4" >> /tmp/partitionfile
|
||||
echo ' $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext4 } mountpoint{ /boot }' >> /tmp/partitionfile
|
||||
echo " ." >> /tmp/partitionfile
|
||||
fi
|
||||
echo "500 10000 1000000000 ext3" >> /tmp/partitionfile
|
||||
echo " method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / }" >> /tmp/partitionfile
|
||||
echo "500 10000 1000000000 ext4" >> /tmp/partitionfile
|
||||
echo " method{ format } format{ } use_filesystem{ } filesystem{ ext4 } mountpoint{ / }" >> /tmp/partitionfile
|
||||
echo " ." >> /tmp/partitionfile
|
||||
echo "2048 512 300% linux-swap" >> /tmp/partitionfile
|
||||
echo " method{ swap } format{ }" >> /tmp/partitionfile
|
||||
|
||||
@@ -40,7 +40,7 @@ An example ``localdisk`` configuration file: ::
|
||||
|
||||
[localspace]
|
||||
dev=/dev/sda1
|
||||
fstype=ext3
|
||||
fstype=ext4
|
||||
|
||||
[swapspace]
|
||||
dev=/dev/sda2
|
||||
@@ -55,7 +55,7 @@ The ``[disk]`` section is used to configure how to partition a hard disk:
|
||||
* dev: The path of the device file.
|
||||
* clear: If set to ``yes`` it will clear all the existing partitions on this disk.
|
||||
* ptype: The partition table type of the disk. For example, ``msdos`` or ``gpt``, and ``msdos`` is the default.
|
||||
* fstype: The file system type for the new created partitions. ``ext3`` is the default.
|
||||
* fstype: The file system type for the new created partitions. ``ext4`` is the default.
|
||||
* parts: A comma separated list of space ranges, one for each partition that will be created on the device. The valid format for each space range is ``<startpoint>-<endpoint>`` or ``<percentage of the disk>``. For example, you could set it to ``100M-10G`` or ``50``. If set to ``50``, 50% of the disk space will be assigned to that partition.
|
||||
|
||||
The ``[localspace]`` section is used to specify which partition will be used as local storage for the node.
|
||||
|
||||
@@ -36,7 +36,7 @@ key --skip
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -34,9 +34,9 @@ clearpart --all --initlabel
|
||||
|
||||
#XCAT_PARTITION_START#
|
||||
#No RAID
|
||||
part /boot --size 50 --ondisk sda --fstype ext3
|
||||
part /boot --size 50 --ondisk sda --fstype ext4
|
||||
part swap --size 1024 --ondisk sda
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext3
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -39,7 +39,7 @@ iscsi --ipaddr #TABLE:iscsi:$NODE:server# --user "#TABLEBLANKOKAY:iscsi:$NODE:us
|
||||
#No RAID
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -36,9 +36,9 @@ clearpart --all --initlabel
|
||||
|
||||
#XCAT_PARTITION_START#
|
||||
#No RAID
|
||||
part /boot --size 100 --ondisk sda --fstype ext3
|
||||
part /boot --size 100 --ondisk sda --fstype ext4
|
||||
part swap --size 2048 --ondisk sda
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext3
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -36,7 +36,7 @@ clearpart --all --initlabel
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -44,15 +44,15 @@ d-i partman-md/device_remove_md boolean true
|
||||
|
||||
d-i partman-auto/expert_recipe string \
|
||||
boot-root :: \
|
||||
40 50 100 ext3 \
|
||||
40 50 100 ext4 \
|
||||
$primary{ } $bootable{ } \
|
||||
method{ format } format{ } \
|
||||
use_filesystem{ } filesystem{ ext3 } \
|
||||
use_filesystem{ } filesystem{ ext4 } \
|
||||
mountpoint{ /boot } \
|
||||
. \
|
||||
500 10000 1000000000 ext3 \
|
||||
500 10000 1000000000 ext4 \
|
||||
method{ format } format{ } \
|
||||
use_filesystem{ } filesystem{ ext3 } \
|
||||
use_filesystem{ } filesystem{ ext4 } \
|
||||
mountpoint{ / } \
|
||||
. \
|
||||
64 512 300% linux-swap \
|
||||
|
||||
@@ -15,8 +15,8 @@ reboot
|
||||
url --url http://#TABLE:noderes:$NODE:nfsserver#/install/#TABLE:nodetype:$NODE:os#/#TABLE:nodetype:$NODE:arch#
|
||||
zerombr yes
|
||||
clearpart --all --initlabel --drives=sda
|
||||
part /boot --fstype ext3 --size=100 --ondisk=sda
|
||||
part / --fstype ext3 --size=2048 --ondisk=sda
|
||||
part /boot --fstype ext4 --size=100 --ondisk=sda
|
||||
part / --fstype ext4 --size=2048 --ondisk=sda
|
||||
part swap --size=2048 --ondisk=sda
|
||||
part None --fstype vmfs3 --size=900 --ondisk=sda --grow
|
||||
part None --fstype vmkcore --size=100 --ondisk=sda
|
||||
|
||||
@@ -36,9 +36,9 @@ clearpart --all --initlabel
|
||||
#No RAID
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
part None --fstype "PPC PReP Boot" --size 8
|
||||
part /boot --size 50 --fstype ext3
|
||||
part /boot --size 50 --fstype ext4
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -37,7 +37,7 @@ clearpart --all --initlabel
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -39,7 +39,7 @@ iscsi --ipaddr #TABLE:iscsi:$NODE:server# --user "#TABLEBLANKOKAY:iscsi:$NODE:us
|
||||
#No RAID
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -37,7 +37,7 @@ clearpart --all --initlabel
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -40,7 +40,7 @@ key --skip
|
||||
part None --fstype "PPC PReP Boot" --size 8
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -39,7 +39,7 @@ key --skip
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -39,7 +39,7 @@ iscsi --ipaddr #TABLE:iscsi:$NODE:server# --user "#TABLEBLANKOKAY:iscsi:$NODE:us
|
||||
#No RAID
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -42,9 +42,9 @@ key --skip
|
||||
#XCAT_PARTITION_START#
|
||||
#No RAID
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
#part /boot --size 50 --fstype ext4
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -39,7 +39,7 @@ part None --fstype "PPC PReP Boot" --size 8
|
||||
#part /boot --size 50 --fstype ext3
|
||||
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -37,7 +37,7 @@ key --skip
|
||||
#/boot really significant for this sort of setup nowadays?
|
||||
#part /boot --size 50 --fstype ext3
|
||||
part swap --size 1024
|
||||
part / --size 1 --grow --fstype ext3
|
||||
part / --size 1 --grow --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -36,9 +36,9 @@ clearpart --all --initlabel
|
||||
|
||||
#XCAT_PARTITION_START#
|
||||
#No RAID
|
||||
part /boot --size 100 --ondisk sda --fstype ext3
|
||||
part /boot --size 100 --ondisk sda --fstype ext4
|
||||
part swap --size 2048 --ondisk sda
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext3
|
||||
part / --size 6000 --grow --ondisk sda --fstype ext4
|
||||
#XCAT_PARTITION_END#
|
||||
|
||||
#RAID 0 /scr for performance
|
||||
|
||||
@@ -260,7 +260,7 @@ elif grep ext4 /proc/filesystems > /dev/null; then
|
||||
else
|
||||
FSTYPE=ext3
|
||||
fi
|
||||
BOOTFSTYPE=ext3
|
||||
BOOTFSTYPE=ext4
|
||||
EFIFSTYPE=vfat
|
||||
msgutil_r "$MASTER_IP" "info" "Found $instdisk, generate partition file..." "/var/log/xcat/xcat.log" "$log_label"
|
||||
if [ `uname -m` = "ppc64" ]; then
|
||||
|
||||
@@ -226,7 +226,7 @@ elif grep ext4 /proc/filesystems > /dev/null; then
|
||||
else
|
||||
FSTYPE=ext3
|
||||
fi
|
||||
BOOTFSTYPE=ext3
|
||||
BOOTFSTYPE=ext4
|
||||
EFIFSTYPE=vfat
|
||||
|
||||
if uname -r|grep -q '^3.*el7'; then
|
||||
|
||||
@@ -195,12 +195,12 @@ if [ -d /sys/firmware/efi ]; then
|
||||
echo " ." >> /tmp/partitionfile
|
||||
else
|
||||
echo "ubuntu-boot ::" > /tmp/partitionfile
|
||||
echo "256 256 512 ext3" >> /tmp/partitionfile
|
||||
echo ' $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ /boot }' >> /tmp/partitionfile
|
||||
echo "256 256 512 ext4" >> /tmp/partitionfile
|
||||
echo ' $primary{ } $bootable{ } method{ format } format{ } use_filesystem{ } filesystem{ ext4 } mountpoint{ /boot }' >> /tmp/partitionfile
|
||||
echo " ." >> /tmp/partitionfile
|
||||
fi
|
||||
echo "500 10000 1000000000 ext3" >> /tmp/partitionfile
|
||||
echo " method{ format } format{ } use_filesystem{ } filesystem{ ext3 } mountpoint{ / }" >> /tmp/partitionfile
|
||||
echo "500 10000 1000000000 ext4" >> /tmp/partitionfile
|
||||
echo " method{ format } format{ } use_filesystem{ } filesystem{ ext4 } mountpoint{ / }" >> /tmp/partitionfile
|
||||
echo " ." >> /tmp/partitionfile
|
||||
echo "2048 512 300% linux-swap" >> /tmp/partitionfile
|
||||
echo " method{ swap } format{ }" >> /tmp/partitionfile
|
||||
|
||||
@@ -45,7 +45,7 @@ fi
|
||||
echo Creating Partition
|
||||
logger -t $log_label -p local4.info $ME Creating Partition
|
||||
parted -s /dev/sda mklabel gpt
|
||||
parted -s -- /dev/sda mkpart primary ext3 0 -0
|
||||
parted -s -- /dev/sda mkpart primary ext4 0 -0
|
||||
if grep sda1 /proc/partitions >/dev/null 2>&1
|
||||
then
|
||||
sleep 5
|
||||
@@ -58,8 +58,8 @@ else
|
||||
exit 1
|
||||
fi
|
||||
|
||||
echo Creating new ext3 filesystem: /dev/sda1
|
||||
logger -t $log_label -p local4.info $ME Creating new ext3 filesystem: /dev/sda1
|
||||
echo Creating new ext4 filesystem: /dev/sda1
|
||||
logger -t $log_label -p local4.info $ME Creating new ext4 filesystem: /dev/sda1
|
||||
mke2fs -j /dev/sda1
|
||||
mkdir -p $mydir
|
||||
echo mounting new /dev/sda1 to $mydir
|
||||
|
||||
Reference in New Issue
Block a user