From 37a2bfde4025436368a9384e1131c028f88347cd Mon Sep 17 00:00:00 2001 From: bp-sawyers Date: Fri, 7 Jun 2013 14:01:35 +0000 Subject: [PATCH] Add hfi option to rbootseq man page git-svn-id: https://svn.code.sf.net/p/xcat/code/xcat-core/branches/2.8@16574 8638fb3e-16cb-4fca-ae20-7b5d299a9bcd --- xCAT-client/pods/man1/rbootseq.1.pod | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/xCAT-client/pods/man1/rbootseq.1.pod b/xCAT-client/pods/man1/rbootseq.1.pod index 027c04fbc..7a5c491ea 100644 --- a/xCAT-client/pods/man1/rbootseq.1.pod +++ b/xCAT-client/pods/man1/rbootseq.1.pod @@ -25,7 +25,8 @@ in effect for these blades until set differently. For PPC (using Direct FSP Management) specific: -B sets the net or hfi device as the first boot device for the specified PPC LPARs. The net or hfi mac address is stored in the mac table. And B requires that the network information is correct in networks table as for getmacs/rnetboot. +B sets the ethernet (net) or hfi device as the first boot device for the specified PPC LPARs. +The B command requires that the ethernet or hfi mac address is stored in the mac table, and that the network information is correct in the networks table. =head1 OPTIONS @@ -49,7 +50,11 @@ The fourth hard disk. =item B|B|B -Boot over the network, using a PXE or BOOTP broadcast. +Boot over the ethernet network, using a PXE or BOOTP broadcast. + +=item B + +Boot p775 nodes over the HFI network, using BOOTP broadcast. =item B