xNBA/contrib/Diskless-From-NT/Diskless-From-NT.txt

The Diskless Terminal running from NT server Mini-HOWTO
Pavel Tkatchouk, ptkatcho@portal.ca
v0.1, June 19th 1999

Table of Contents

1. Introduction.

   1.1 What is it for?
   1.2 Do we need this HOWTO?
   1.3 A bit of History.

2. Project description.

   2.1 Packaging.
   2.2 Image.
      2.2.1 Kernel.
      2.2.2 MRFS.
      2.2.3 Building MRFS.
   2.3 Remotefs.
   2.4 Booting sequence.
      2.4.1 BOOTP, TFTP.
   2.5 Bootprom.

3. Resources.

4. Copyright.

5. Feedback and credits.


1. Introduction.


1.1. What is it for?

This document describes how to build software distribution to run Java client on diskless 
terminal booted from Microsoft Windows 95/98/NT workstation. Package can also be easily 
modified to be used as Linux terminal or X Windows terminal's software. I found it also 
convenient for setup over the Ethernet of floppyless PS's, hard disk of which for some 
reason can not be accessed (sealed case under warranty, etc.).


1.2. Do we need this HOWTO?

To be honest, I'm not sure. There are few excellent HOWTO's (see 3. Recources) that up until 
recently I considered quite sufficient to build what I've done two years ago. But since my 
project uses MS Windows as a file server vs. traditional NFS there were some know-how's 
involved which number of people wanted to see in some formal document.


1.3. A bit of history.

My project at that time (1996) was to find OS/JVM that will allow to run Java application 
on hardware we manufacture. Hardware is practically generic x86 PC except it has no keyboard, 
hard drive, floppy drive, mouse, but touchscreen over LCD, plus some POS specific peripherals 
(badge reader, credit card reader, etc.). Due to cost consideration it had no any significant 
storage, so OS and Java client along with support binaries, libraries etc. had to be loaded 
remotely. Because our clients are exclusively Windows shops, Server had to be Windows as well. 
During evaluation of different commercial OS'es along with JVM's available it become apparent 
to my surprise that most promising solution was GPL one - Linux.


2. Project description.

2.1. Packaging.

The whole distribution consists of remote file system (RemoteFS) residing on MS Windows
server (NT Workstation, NT Server or Windows9x) and tagged bootable image. 


2.2. Image.

Image (~1.5MB) is generated by mknbi utility that comes with Etherboot package
<http://etherboot.sourceforge.net>. It can include minimal root file system (MRFS) 
like in my case (since I had to boot client from MS Windows server and Linux kernel doesn't 
support SMBFS-Root, only NFS-Root. So I had to keep rootfs in the ramdisk). To generate 
image the following script can be used.

#!/bin/sh
# mkrootnet: makes tagged netbootable image
# This image includes kernel and minimal root filesystem
# to do initial boot.
#
# Copyright (c) Pavel Tkatchouk 1996. All rights reserved.
# Permission is granted for this material to be freely
# used and distributed, provided the source is acknowledged.
# No warranty of any kind is provided. You use this material
# at your own risk.
#
DEVICEFILENAME="/tmp/file"		# temporary file to be used as device
FSBLOCKS=4096   				# uncompressed filesystem size in K
BOOTDISKDIR="/usr/BOOT/ROOTFS"	# root filesystem model
MOUNT="/mnt2"				# temporary mount point
ROOTFS="/tmp/rootfs"			# root filesystem image
ROOTFSGZ="/tmp/rootfs.gz"		# compressed root filesystem image
KERNEL="/usr/KERNELS/vmlinuz-nt"	# kernel image
KERNELTMP="/tmp/vmlinuz"		# temporary copy of kernel image
BOOTIMAGE="/tmp/img"			# tagged image to be booted by client
# if you want ramisk more than default 4096 set CMDLINE, don't forget to
# adjust $FSBLOCKS 
# CMDLINE="ramdisk_size=8192"		# parameters to pass to the kernel
# 
echo "check:"
echo "- if tftp server's download dir mounted to /mnt"
echo "- loopback device is built-in or loaded"
echo "\n press Enter when done"
read tmp 
UPLOAD="/mnt/tmp"				# tftp server's dir to upload bootimage
echo -e "\nZeroing $DEVICEFILENAME of $FSBLOCKS k"
echo "to be used as device for root filesystem model"
dd if=/dev/zero of=$DEVICEFILENAME bs=1k count=$FSBLOCKS
echo -e "\nMaking file system on $DEVICEFILENAME"
mke2fs -m 0 $DEVICEFILENAME
echo "Mounting $DEVICEFILENAME as a loopback device"
mount -o loop -t ext2 $DEVICEFILENAME $MOUNT
curdir=`pwd`
cd $BOOTDISKDIR
echo -e "Copying files from $BOOTDISKDIR to $DEVICEFILENAME, please wait"
find . -print|cpio -pmd $MOUNT
echo "Unmounting $MOUNT"
umount $MOUNT
cd $curdir
echo "Copying $DEVICEFILENAME to $ROOTFS"
dd if=$DEVICEFILENAME of=$ROOTFS bs=1k
echo "Compressing $ROOTFS, it may take a while"
echo "Please wait..."
if [ -f $ROOTFSGZ ];then
	rm -f $ROOTFSGZ
fi
gzip -c $ROOTFS>$ROOTFSGZ
rm -f $ROOTFS
echo -e "\nCreating netbootable image"
cp $KERNEL $KERNELTMP
mknbi -d ram -i rom -r $ROOTFSGZ -k $KERNELTMP -a $CMDLINE -o $BOOTIMAGE
echo "Uploading $BOOTIMAGE to $UPLOAD"
cp $BOOTIMAGE $UPLOAD
echo "Cleaning after ourselves"
rm -f $KERNELTMP $DEVICEFILENAME $BOOTIMAGE
echo "All done"


In the above script actual image is generated by the following comand

#mknbi -d ram -i rom -r rootfs.gz -k vmlinuz-nt -o img

where:
	rootfs.gz - minimal root file system (MRFS);
	vmlinuz-nt   - kernel;
	img       - resulting image.


Note:
Default ramdisk size is 4096. It was enough for RedHat4.1 based minimal file system, but 
apparently not enough for 5.2 based. When this happens "end request:I/O error, dev 01:00 ..." 
error shows up. To fix that either use "mknbi -a ramdisk_size=8192" to pass parameter to the 
kernel (doesn't require kernel recompilation), or change /usr/src/linux/drivers/block/rd.c: 
int rd_size= from 4096 to 8192 or whatever and rebuild the kernel.                                                    


2.2.1. Kernel.

Kernels 2.0.30 and 2.0.36 have been used by author, although nothing is preventing you from
experimenting with others. Kernel should include ramdisk support. The following 
<link to .config> configuration has been used to build <link to binary (kernel 2.0.30)>. 
You may find some components unnecessary, just exclude them and rebuild. 

Don't forget to change root device after you built the kernel (rdev vmlinuz /dev/rd).

Gotcha's: apparently smbfs is broken in 2.2.x kernels. Symptoms: remote share is mounted
just fine but after a while fails with "smb_request: result = -32" errmsg. I've heard
SuSe has fix for that.

2.2.2. MRFS.

Minimal root file system is required to get Linux up and running along with networking until 
it can mount remote file system to run X/Java from there. After image gets loaded from the 
server MRFS is decompressed into ramdisk. If you can afford a lot of ram on your terminal the 
entire remote file system can be moved to rootfs.gz. That will make your terminal more 
responsive.


2.2.3. Building MRFS.  

Some folks found it easier to start from scratch, others use known "minimal" Linux distributions
(Linux Router, tomsrtbt, etc.), yet others prefer to start from "big" Linuces like I did. Every
path has it's pro and contras.

Pruning standard distribution (RedHat, Debian, etc.) to your needs might be very time consuming.
To ease that painful process I have used remotely booted diskless client with NFS-Root (see 
Etherboot's Readme, NFS-Root and NFS-Root-Client mini-HOWTO's, Diskless-HOWTO):

- setup minimal RedHat4.1 install (networked workstation, X, no development, mail, etc., ~117MB);
- find . -print|cpio -pmd /usr/NFS/ROOTFS - copy entire fs tree to NFS exported dir;
- mknod /usr/NFS/ROOTFS/dev/nfsroot b 0 255;
- build vmlinuz-nfs kernel according to NFS-Howto (built-in bootp,rarp,NFS,NFS root,NIC 
  driver,RAM disk);
- rdev vmlinuz-nfs /dev/nfsroot - to set NFS root device; 
- build image for NFS-Root fs:
  #mknbi -d rom -i rom -k vmlinuz-nfs -o nfsImage;
- boot client while monitoring NFS file requests (by Solaris snoop);
- copy files from /usr/NFS/ROOTFS to /usr/BOOT/ROOTFS (MRFS model) according to snoop's
  filelist;
- generate image by mkrootnet script (don't forget to point to the right kernel vmlinuz-nt).

The above trick not only allows to determine the sought files set but also debug boot process 
analyzing NFS messages. I found it convenient to put "read tmp" statements into init scripts
for debugging. Tracking files up until issuing login gives you <link to rootfs.gz> MRFS (~1MB) 
that can be used to boot Linux from ROM (flash, eprom, DiskOnChip, SanDisk, etc.) as well. All 
the other files requested by client (during starting X, Java, Java client) were put into (link 
to remotefs.zip, ~9MB).


To restore MRFS model on your PC from the above rootfs.gz:
- #cd /tmp
- #gunzip rootfs.gz
- #mount -o loop -t ext2 /tmp/rootfs /mnt
- #cd /mnt
- #find . -print|cpio -pmd /usr/BOOT/ROOTFS
- #umount /mnt

Note: 

You will have to change attributes of some dirs, files (/etc/mtab, /etc/mtab~, /var/lock/subsys/*, 
/var/run/*, /dev/tty*, etc.) against standard. This is because with standard attribs diskless 
client refused to work. For example I had to change /dev/tty* ownerships to 99:99 from original 
0:0 or 0:5, to get rid of errmsg "INIT: Id "1" respawning too fast: disabled for 5 minutes". 
Being admin illiterate I just chmod them to 777 and chown to 99:99 to make life easier. 
THIS IS SERIOUS SECURITY VIOLATION!!! Using keyboardless terminal with no daemons running in 
my case reduces the risk, yet I would appreciate very much those more experienced who will help 
to restore the right attribs while keeping the distribution working.

Some "gotcha's" to watch for during MRFS building:
- standard attributes/ownership of some files don't work;
- rdev must be set (non-tagged image didn't work, so couldn't use config file to pass parrs 
  to the kernel);
- diskless client writes 99:99 ownership on generated files;
- "password incorrect" for root, but any other OK and su OK too.


2.3. RemoteFS.

Remotefs.zip file includes everything required by the system that can be located on
remote file system, i.e after booting has been complete and remote file system mounted.
In my case it is X Windows System and Java binaries, libraries etc. To use that file on
MS Windows NT:
- unzip remotefs.zip to some directory;
- share this directory read-only as "usr" (or share as some other name and pass this name to
  the client through bootptab configuration file for BOOTP server;
- create an account username=root, password=linux on NT (can be set in bootptab).

Note:
There's no symbolic links on NTFS, so UNIX links must be replaced by copies on NTFS. 
To determine potential troublmakers one could use the following:
- first copy required subset (according to snoop's intercept) from /usr/NFS/ROOTFS to 
  /usr/BOOT/REMOTEFS;
- mount some share from NTFS to /mnt;
- /usr/BOOT/REMOTEFS#find . -print|cpio -pmd /mnt 2>links;
In the links file you will find names to work with.


2.4. Booting sequence.

Boot occurs in the following sequence:
- bootprom sends bootp request,
- bootp server responds with subnet mask, client's name, client's IP, TFTP server's IP, 
  bootfile name and some optional parameters (like NT's username/password to use it's share,
  you could pass some other share name here as say T104="somedir");
- bootprom downloads image from TFTP server;
- kernel starts;
- kernel decompresses MRFS in RAM;
- system starts init using ramdisk root,
- mounts remote file system from NT via SMBFS;
- automatically logins;
- starts xstart script located on remotefs (/usr/sbin) where you can start any of your
  programs, change parameters, etc. without rebuilding the image.

Below are some config/init sample files from <rootfs.gz>, <remotefs.zip>:

<bootptab, change to link>
t1:sm=255.255.255.0:sa=192.168.33.150:bf=img:T100="pavelnt4":T101="root":T102="linux"
touch1:hn=touch1:tc=t1:ha=00A0F00035CD:ip=192.168.33.127

</etc/fstab, change to link>:
/dev/ram  /      ext2    defaults    1 1
/proc     /proc  proc    defaults    0 0

</etc/rc.d/rc.bootp, change to link later>:
#!/bin/sh
# Written to simply set the IP stuff up from the
# bootpc data.
# Last updated : Mon Mar 10 15:17:01 1997
#
# Variables

BOOTPC=/sbin/bootpc
IFCONFIG=/sbin/ifconfig
ROUTE=/sbin/route
BINHOST=/bin/hostname
DEV=eth0
ASKSERVER="255.255.255.255"
TW="--timeoutwait 320"
RIF="--returniffail"
RIFMESSAGE="Bootp failed -- disabling network."
RCONF=/etc/resolv.conf
EHOSTS=/etc/hosts
LHOSTS=/etc/hosts.local
TMPFILE=/tmp/bootp
# Functions
# Remove the networking by taking down the interface
netdown() {
  ${ROUTE} del default
  ${IFCONFIG} ${DEV} down
}
## End of the functions

## Start of the actual work
# Bring up minimal networking use 0.0.0.0 as our address as we don't
# know it yet (Means "Me but I don't know my address or network")
${IFCONFIG} ${DEV} up 0.0.0.0
${ROUTE} add default dev ${DEV}

# Perform the bootp  --  doesn't return unless it gets an answer
if ${BOOTPC} --dev ${DEV} --server ${ASKSERVER} ${RIF} ${TW} > ${TMPFILE}
then
# Take down networking (use the 0.0.0.0 for as short a time as possible)
  netdown
# Read in the values   
  . ${TMPFILE}

# To use in mountsmb script later
SMBSERVER=${T100}
# And delete the temporary file
#  rm ${TMPFILE}
else
# Take down networking (use the 0.0.0.0 for as short a time as possible)
  netdown
# give message and quit
  echo ${RIFMESSAGE}
  exit 1
fi

# Start the loopback interface and add a route to it
# It's already set by standard init?
${IFCONFIG} lo 127.0.0.1
${ROUTE} add -net 127.0.0.0

# Setup of IP stuff needs doing first
#
if [ -z "${NETMASK}" ] ; then
# No netmask info, all this is guessed from the IP number
# If this is wrong for your network FIX the bootpd to know
# what it should send in the RFC1497 cookie!  11/02/94 JSP
#
  ${IFCONFIG} ${DEV} up ${IPADDR} broadcast ${BROADCAST} 
  ${ROUTE} -n add -net ${NETWORK} dev ${DEV}
else
# We will have NETMASK, BROADCAST, and NETWORK defined 
  ${IFCONFIG} ${DEV} up ${IPADDR} broadcast ${BROADCAST} netmask ${NETMASK} 
  ${ROUTE} -n add -net ${NETWORK} dev ${DEV}
fi

# Set the hostname from what we got via bootp or reverse lookup

echo "127.0.0.1	loopback localhost">${EHOSTS}
${BINHOST} "${HOSTNAME}"
echo "${IPADDR}	${HOSTNAME}" >>${EHOSTS}
echo "${SERVER} ${SMBSERVER}" >>${EHOSTS}


</etc/rc.d/rc.local, change to link>:
#!/bin/sh
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
#
# 07/02/97 Pavel Tkatchouk
#
echo "Start networking"
insmod /lib/8390.o
insmod /lib/ne.o io=0x300 irq=9
echo "Install serial"
insmod /lib/serial.o
echo "Install touch"
insmod /lib/touch.o
echo "Install smbfs"
insmod /lib/smbfs.o
echo "Getting TCP/IP parameters from bootp server"
echo "and start networking"
/etc/rc.d/rc.bootp
if [ -f /etc/squirrel-release ]; then
	R=$(cat /etc/squirrel-release)
else
	R="release 0.02"
fi
echo "Mounting remote fs"
/sbin/mountsmb
echo "XYZ Inc. Diskless Linux $R"
echo "Starting X and Java client without login"
su -c /sbin/xstart root


</usr/sbin/xstart, change to link>:
#!/bin/bash
#
# Script to start X and Java client
# 08/07/97 Pavel Tkatchouk
#
# Read bootps response first
. /tmp/bootp
# -s 0 to disable screen-saver
/usr/X11R6/bin/X -s 0 &
export DISPLAY=:0.0
# /usr is share mounted from Windows workstation
cd /usr/program/
java SomeJavaApp 


</sbin/mountsmb, change to link>:
#!/bin/bash
# mountsmb: mounts remote filesystems from NT workstation 
# using Microsoft's SMB protocol 
# 
# Copyright (c) Pavel Tkatchouk 1997. All rights reserved.
# Permission is granted for this material to be freely
# used and distributed, provided the source is acknowledged.
# No warranty of any kind is provided. You use this material
# at your own risk.
#
# Last edit June 29 8:30 1997
#
MOUNTDIR="usr"
SHRDIR="usr"
BOOTPRES="/tmp/bootp"
# Read botpc response
. ${BOOTPRES}
# Sharename from NT server, uncomment if you want to use 
# non-hardcoded "usr" but from bootptab
#SHRDIR=${T104} 
SMBSRV="//${T100}"
CLIENT="${HOSTNAME}"
USER="${T101}"
PASSWORD="${T102}"
echo -e "\nMounting $SMBSRV/$SHRDIR to /$MOUNTDIR"
smbmount $SMBSRV/$SHRDIR $MOUNTDIR -c $CLIENT -U $USER -P $PASSWORD
echo -e "\nDone"

Gotcha's:
Looks like smbmount client from smbfs package used to mount remote Windows shares to local 
Linux dirs in pre 2.2.x era isn't maintained anymore so you should use one coming with 
Samba package. Also binary smbmount won't work with 2.2.x, so you have to recompile with 
2.2.x headers following Samba's readme. Yet even that won't guarantee reliable work until
somebody fixes kernel's smbfs module.

2.4.1. BOOTP, TFTP.

There are number of BOOTP, TFTP servers for Windows on the market. You could find them
here:

- www.walusoft.co.uk (Walusoft's tftp);
- ftp.coast.net/simtel/nt/internet/tftpds12.zip (Millwood AB's tftp);
- ftp.cabletron.com/pub/snmp/bootftp/boottft2.zip (Cabletron's bootp/tftp combo);
- www.tellurian.au.com (Tellurian's bootp, tftp, dhcp servers).
- www.metainfo.com (Metainfo's DHCP server)
- www.nts.com (Network Telesystems's DHCP server in IPserver package)

My choice was Tellurian's products - very reliable, simple to install, attractively priced
(fully capable evaluation versions are available).

2.5. Bootprom.

Ken Yap's Etherboot <etherboot.sourceforge.net> will tell you everything about bootprom. 
Here I just want to mention that normally you would have to put bootprom's code into network
adapter's PROM. But if your hardware like mine has BIOS programmed in flash you could 
re-program it to add bootprom (some BIOS requires special programmer to do that, others don't)
as BIOS extension.

This is what I did to add ne.rom (bootprom generated by Etherboot's makerom for NE2000 clone) 
to AMI BIOS on my flash:

- read flash content by programmer into bios.bin binary file;
- use one of available binary editors (say www.simtel.net/Win95/editors/hxp3005.zip to add
  ne.rom to bios.bin (and to edit ne.rom if necessary);
- write new bios.bin back to flash.

Notes:
- makerom generates bootprom for standard EPROM sizes (8k, 16k, 32k, etc.), so if you tight on 
  space use -s flag to adjust size (or cut it manually to multiple of 512 bytes blocks, just
  don't forget to adjust extension's length which is coded in Byte 2 and checksum to 8 bits 
  of zero;
- valid absolute addresses for BIOS extensions are from 0xC8000 to 0xF4000 (check with 
  motherboard's manufacturer how flash is mapped onto system memory space);
- Byte 0 must be 0x55, Byte 1 must be 0xAA, Byte 2 must be extension's length in 512 bytes 
  blocks;
- extension BIOS has to start at a 2k boundary;


3. Resources.

FAQ's:
- tomsrtbt.FAQ (www.toms.net);

HOWTO's:
- Paul Moody's miniHOWTO (www.linuxembedded.com/pmhowto.html)
- Diskless;
- Diskless-HOWTO;
- NFS-Root;
- NFS-Root-Client;
- Bootdisk-HOWTO;
- BootPrompt-HOWTO;
- NCD-X-Terminal;
- Remote-Boot;
- Remote-X-Apps;

Web:
- etherboot.sourceforge.net/
- www.waste.org/~zanshin
- www.tellurian.com.au.
- www.toms.net
- www.trinux.org
- www.linux.org.uk/ELKS-Home
- www.embedded.com
- www.linuxembedded.com
- www.thinlinux.org
- www.linuxrouter.org
- linux-mandrake.com
- www.disklessworkstations.com

Newsgroups:
- comp.arch.embedded

Lists:
- netboot-owner@baghira.han.de
- linux-embedded@waste.org

Magazines:
- Circuit Cellar #100 - 105


4. Copyright.

Copyright (c) Pavel Tkatchouk 1999.
Permission is granted for this material to be freely used and distributed, provided the source 
is acknowledged. Copyright policy is GPL as published by the Free Software Foundation.

No warranty of any kind is provided. You use this material at your own risk.

 

5. Feedback and credits.

Since I am neither have a lot of Linux experience nor native English speaker, there would be 
errors in this document. I would accept any help with gratitude whether in form of proof-reading, 
techical corrections or otherwise. Please send your comments, suggestions and questions to Pavel 
Tkatchouk (ptkatcho@portal.ca)

I wish to thank Pierre Mondie who convinced me to start this document. I'm also very much in 
debt to all those who's work made this project possible:

Ken Yap 		<ken_yap@users.sourceforge.net>	(Etherboot)
David Newall 	<www.tellurian.com.au>	(Bootpdnt/Ftpdnt)
(to be continued)