mirror of
https://github.com/xcat2/xNBA.git
synced 2024-12-25 04:31:45 +00:00
37 lines
1.3 KiB
Plaintext
37 lines
1.3 KiB
Plaintext
I wrote the attached little util program to try out the basic approach
|
|
and thought that you might find it useful as well as providing some
|
|
simple testing. It isn't a final solution so the interface is rough. The
|
|
program must be run as root on an Intel based machine.
|
|
|
|
The key point is that the IO address needs to be entered - I grab it
|
|
from the dmesg output:
|
|
|
|
eth0: 3Com 3c905B Cyclone 100baseTx at 0xe400, 00:10:4b:d2:5e:0d, IRQ
|
|
11
|
|
|
|
or "cat /proc/pci" to find the "I/O at XXXXXX" for your 3Com Card.
|
|
|
|
Some example commands are:
|
|
|
|
romutil 0xe400 erase - erases the ROM contents
|
|
romutil 0xe400 protect - enables the Software Data Protection
|
|
on the ROM [3c905B only]
|
|
romutil 0xe400 unprotect - disables the Software Data Protection
|
|
on the ROM [3c905B only]
|
|
romutil 0xe400 id - displays the manufacturer and
|
|
device IDs
|
|
romutil 0xe400 read >file - writes the contents of the ROM to stdout
|
|
romutil 0xe400 prog <file - writes the contents of the stdin into the
|
|
ROM (<64k)
|
|
|
|
I tried reading and writing the ROM while doing large ftp transfers and
|
|
experienced no problems. I didn't spend much time worrying about the
|
|
possible race conditions. My system has lots of resources (450MHx P2,
|
|
128MB RAM) so it might not provide the best test candidate.
|
|
|
|
Let me know what results you get if you try it out.
|
|
|
|
Thanks
|
|
|
|
John
|