xCAT/xNBA
2
0
Fork 0
mirror of https://github.com/xcat2/xNBA.git synced 2024-12-16 08:11:31 +00:00
Code Issues Projects Releases Wiki Activity
c4964c3e3a
xNBA/src/drivers/net/3c595.c
Michael Brown 286bf68faf Added a very quick and dirty compatibility layer, to allow 
not-yet-updated drivers to at least function.
2006-06-05 15:45:21 +00:00

552 lines
14 KiB
C
Raw Blame History

/*
* 3c595.c -- 3COM 3C595 Fast Etherlink III PCI driver for etherboot
*
* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp>
* All rights reserved.
* Mar. 14, 2000
*
* This software may be used, modified, copied, distributed, and sold, in
* both source and binary form provided that the above copyright and these
* terms are retained. Under no circumstances are the authors responsible for
* the proper functioning of this software, nor do the authors assume any
* responsibility for damages incurred with its use.
*
* This code is based on Martin Renters' etherboot-4.4.3 3c509.c and
* Herb Peyerl's FreeBSD 3.4-RELEASE if_vx.c driver.
*
* Copyright (C) 1993-1994, David Greenman, Martin Renters.
* Copyright (C) 1993-1995, Andres Vega Garcia.
* Copyright (C) 1995, Serge Babkin.
*
* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
*
* timlegge 08-24-2003 Add Multicast Support
*/
/* #define EDEBUG */
#include "etherboot.h"
#include "nic.h"
#include <gpxe/pci.h>
#include "3c595.h"
#include "timer.h"
static struct nic_operations t595_operations;
static unsigned short eth_nic_base;
static unsigned short vx_connector, vx_connectors;
static struct connector_entry {
int bit;
char *name;
} conn_tab[VX_CONNECTORS] = {
#define CONNECTOR_UTP 0
{ 0x08, "utp"},
#define CONNECTOR_AUI 1
{ 0x20, "aui"},
/* dummy */
{ 0, "???"},
#define CONNECTOR_BNC 3
{ 0x10, "bnc"},
#define CONNECTOR_TX 4
{ 0x02, "tx"},
#define CONNECTOR_FX 5
{ 0x04, "fx"},
#define CONNECTOR_MII 6
{ 0x40, "mii"},
{ 0, "???"}
};
static void vxgetlink(void);
static void vxsetlink(void);
/**************************************************************************
ETH_RESET - Reset adapter
***************************************************************************/
static void t595_reset(struct nic *nic)
{
int i;
/***********************************************************
Reset 3Com 595 card
*************************************************************/
/* stop card */
outw(RX_DISABLE, BASE + VX_COMMAND);
outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
VX_BUSY_WAIT;
outw(TX_DISABLE, BASE + VX_COMMAND);
outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
udelay(8000);
outw(RX_RESET, BASE + VX_COMMAND);
VX_BUSY_WAIT;
outw(TX_RESET, BASE + VX_COMMAND);
VX_BUSY_WAIT;
outw(C_INTR_LATCH, BASE + VX_COMMAND);
outw(SET_RD_0_MASK, BASE + VX_COMMAND);
outw(SET_INTR_MASK, BASE + VX_COMMAND);
outw(SET_RX_FILTER, BASE + VX_COMMAND);
/*
* initialize card
*/
VX_BUSY_WAIT;
GO_WINDOW(0);
/* Disable the card */
/* outw(0, BASE + VX_W0_CONFIG_CTRL); */
/* Configure IRQ to none */
/* outw(SET_IRQ(0), BASE + VX_W0_RESOURCE_CFG); */
/* Enable the card */
/* outw(ENABLE_DRQ_IRQ, BASE + VX_W0_CONFIG_CTRL); */
GO_WINDOW(2);
/* Reload the ether_addr. */
for (i = 0; i < ETH_ALEN; i++)
outb(nic->node_addr[i], BASE + VX_W2_ADDR_0 + i);
outw(RX_RESET, BASE + VX_COMMAND);
VX_BUSY_WAIT;
outw(TX_RESET, BASE + VX_COMMAND);
VX_BUSY_WAIT;
/* Window 1 is operating window */
GO_WINDOW(1);
for (i = 0; i < 31; i++)
inb(BASE + VX_W1_TX_STATUS);
outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
/*
* Attempt to get rid of any stray interrupts that occured during
* configuration. On the i386 this isn't possible because one may
* already be queued. However, a single stray interrupt is
* unimportant.
*/
outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
outw(SET_RX_FILTER | FIL_INDIVIDUAL |
FIL_BRDCST|FIL_MULTICAST, BASE + VX_COMMAND);
vxsetlink();
/*{
int i,j;
i = CONNECTOR_TX;
GO_WINDOW(3);
j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
GO_WINDOW(4);
outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
GO_WINDOW(1);
}*/
/* start tranciever and receiver */
outw(RX_ENABLE, BASE + VX_COMMAND);
outw(TX_ENABLE, BASE + VX_COMMAND);
}
/**************************************************************************
ETH_TRANSMIT - Transmit a frame
***************************************************************************/
static char padmap[] = {
0, 3, 2, 1};
static void t595_transmit(
struct nic *nic,
const char *d, /* Destination */
unsigned int t, /* Type */
unsigned int s, /* size */
const char *p) /* Packet */
{
register int len;
int pad;
int status;
#ifdef EDEBUG
printf("{l=%d,t=%hX}",s+ETH_HLEN,t);
#endif
/* swap bytes of type */
t= htons(t);
len=s+ETH_HLEN; /* actual length of packet */
pad = padmap[len & 3];
/*
* The 3c595 automatically pads short packets to minimum ethernet length,
* but we drop packets that are too large. Perhaps we should truncate
* them instead?
*/
if (len + pad > ETH_FRAME_LEN) {
return;
}
/* drop acknowledgements */
while(( status=inb(BASE + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
outw(TX_RESET, BASE + VX_COMMAND);
outw(TX_ENABLE, BASE + VX_COMMAND);
}
outb(0x0, BASE + VX_W1_TX_STATUS);
}
while (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
/* no room in FIFO */
}
outw(len, BASE + VX_W1_TX_PIO_WR_1);
outw(0x0, BASE + VX_W1_TX_PIO_WR_1); /* Second dword meaningless */
/* write packet */
outsw(BASE + VX_W1_TX_PIO_WR_1, d, ETH_ALEN/2);
outsw(BASE + VX_W1_TX_PIO_WR_1, nic->node_addr, ETH_ALEN/2);
outw(t, BASE + VX_W1_TX_PIO_WR_1);
outsw(BASE + VX_W1_TX_PIO_WR_1, p, s / 2);
if (s & 1)
outb(*(p+s - 1), BASE + VX_W1_TX_PIO_WR_1);
while (pad--)
outb(0, BASE + VX_W1_TX_PIO_WR_1); /* Padding */
/* wait for Tx complete */
while((inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS) != 0)
;
}
/**************************************************************************
ETH_POLL - Wait for a frame
***************************************************************************/
static int t595_poll(struct nic *nic, int retrieve)
{
/* common variables */
/* variables for 3C595 */
short status, cst;
register short rx_fifo;
cst=inw(BASE + VX_STATUS);
#ifdef EDEBUG
if(cst & 0x1FFF)
printf("-%hX-",cst);
#endif
if( (cst & S_RX_COMPLETE)==0 ) {
/* acknowledge everything */
outw(ACK_INTR | cst, BASE + VX_COMMAND);
outw(C_INTR_LATCH, BASE + VX_COMMAND);
return 0;
}
status = inw(BASE + VX_W1_RX_STATUS);
#ifdef EDEBUG
printf("*%hX*",status);
#endif
if (status & ERR_RX) {
outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
return 0;
}
rx_fifo = status & RX_BYTES_MASK;
if (rx_fifo==0)
return 0;
if ( ! retrieve ) return 1;
/* read packet */
#ifdef EDEBUG
printf("[l=%d",rx_fifo);
#endif
insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet, rx_fifo / 2);
if(rx_fifo & 1)
nic->packet[rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
nic->packetlen=rx_fifo;
while(1) {
status = inw(BASE + VX_W1_RX_STATUS);
#ifdef EDEBUG
printf("*%hX*",status);
#endif
rx_fifo = status & RX_BYTES_MASK;
if(rx_fifo>0) {
insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet+nic->packetlen, rx_fifo / 2);
if(rx_fifo & 1)
nic->packet[nic->packetlen+rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
nic->packetlen+=rx_fifo;
#ifdef EDEBUG
printf("+%d",rx_fifo);
#endif
}
if(( status & RX_INCOMPLETE )==0) {
#ifdef EDEBUG
printf("=%d",nic->packetlen);
#endif
break;
}
udelay(1000);
}
/* acknowledge reception of packet */
outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS);
#ifdef EDEBUG
{
unsigned short type = 0; /* used by EDEBUG */
type = (nic->packet[12]<<8) | nic->packet[13];
if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
nic->packet[5] == 0xFF*ETH_ALEN)
printf(",t=%hX,b]",type);
else
printf(",t=%hX]",type);
}
#endif
return 1;
}
/*************************************************************************
3Com 595 - specific routines
**************************************************************************/
static int
eeprom_rdy()
{
int i;
for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++)
udelay(1000);
if (i >= MAX_EEPROMBUSY) {
/* printf("3c595: eeprom failed to come ready.\n"); */
printf("3c595: eeprom is busy.\n"); /* memory in EPROM is tight */
return (0);
}
return (1);
}
/*
* get_e: gets a 16 bits word from the EEPROM. we must have set the window
* before
*/
static int
get_e(offset)
int offset;
{
if (!eeprom_rdy())
return (0xffff);
outw(EEPROM_CMD_RD | offset, BASE + VX_W0_EEPROM_COMMAND);
if (!eeprom_rdy())
return (0xffff);
return (inw(BASE + VX_W0_EEPROM_DATA));
}
static void
vxgetlink(void)
{
int n, k;
GO_WINDOW(3);
vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
if (vx_connectors & conn_tab[k].bit) {
if (n > 0) {
printf("/");
}
printf(conn_tab[k].name);
n++;
}
}
if (vx_connectors == 0) {
printf("no connectors!");
return;
}
GO_WINDOW(3);
vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG)
& INTERNAL_CONNECTOR_MASK)
>> INTERNAL_CONNECTOR_BITS;
if (vx_connector & 0x10) {
vx_connector &= 0x0f;
printf("[*%s*]", conn_tab[vx_connector].name);
printf(": disable 'auto select' with DOS util!");
} else {
printf("[*%s*]", conn_tab[vx_connector].name);
}
}
static void
vxsetlink(void)
{
int i, j;
char *reason, *warning;
static char prev_conn = -1;
if (prev_conn == -1) {
prev_conn = vx_connector;
}
i = vx_connector; /* default in EEPROM */
reason = "default";
warning = 0;
if ((vx_connectors & conn_tab[vx_connector].bit) == 0) {
warning = "strange connector type in EEPROM.";
reason = "forced";
i = CONNECTOR_UTP;
}
if (warning != 0) {
printf("warning: %s\n", warning);
}
printf("selected %s. (%s)\n", conn_tab[i].name, reason);
/* Set the selected connector. */
GO_WINDOW(3);
j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
outl(j | (i <<INTERNAL_CONNECTOR_BITS), BASE + VX_W3_INTERNAL_CFG);
/* First, disable all. */
outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
udelay(8000);
GO_WINDOW(4);
outw(0, BASE + VX_W4_MEDIA_TYPE);
/* Second, enable the selected one. */
switch(i) {
case CONNECTOR_UTP:
GO_WINDOW(4);
outw(ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
break;
case CONNECTOR_BNC:
outw(START_TRANSCEIVER,BASE + VX_COMMAND);
udelay(8000);
break;
case CONNECTOR_TX:
case CONNECTOR_FX:
GO_WINDOW(4);
outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
break;
default: /* AUI and MII fall here */
break;
}
GO_WINDOW(1);
}
static void t595_disable ( struct nic *nic, struct pci_device *pci __unused ) {
nic_disable ( nic );
t595_reset(nic);
outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
udelay(8000);
GO_WINDOW(4);
outw(0, BASE + VX_W4_MEDIA_TYPE);
GO_WINDOW(1);
}
static void t595_irq(struct nic *nic __unused, irq_action_t action __unused)
{
switch ( action ) {
case DISABLE :
break;
case ENABLE :
break;
case FORCE :
break;
}
}
/**************************************************************************
ETH_PROBE - Look for an adapter
***************************************************************************/
static int t595_probe ( struct nic *nic, struct pci_device *pci ) {
int i;
unsigned short *p;
if (pci->ioaddr == 0)
return 0;
eth_nic_base = pci->ioaddr;
nic->irqno = 0;
pci_fill_nic ( nic, pci );
nic->ioaddr = pci->ioaddr;
GO_WINDOW(0);
outw(GLOBAL_RESET, BASE + VX_COMMAND);
VX_BUSY_WAIT;
vxgetlink();
/*
printf("\nEEPROM:");
for (i = 0; i < (EEPROMSIZE/2); i++) {
printf("%hX:", get_e(i));
}
printf("\n");
*/
/*
* Read the station address from the eeprom
*/
p = (unsigned short *) nic->node_addr;
for (i = 0; i < 3; i++) {
GO_WINDOW(0);
p[i] = htons(get_e(EEPROM_OEM_ADDR_0 + i));
GO_WINDOW(2);
outw(ntohs(p[i]), BASE + VX_W2_ADDR_0 + (i * 2));
}
printf("Ethernet address: %!\n", nic->node_addr);
t595_reset(nic);
nic->nic_op = &t595_operations;
return 1;
}
static struct nic_operations t595_operations = {
.connect = dummy_connect,
.poll = t595_poll,
.transmit = t595_transmit,
.irq = t595_irq,
};
static struct pci_device_id t595_nics[] = {
PCI_ROM(0x10b7, 0x5900, "3c590", "3Com590"), /* Vortex 10Mbps */
PCI_ROM(0x10b7, 0x5950, "3c595", "3Com595"), /* Vortex 100baseTx */
PCI_ROM(0x10b7, 0x5951, "3c595-1", "3Com595"), /* Vortex 100baseT4 */
PCI_ROM(0x10b7, 0x5952, "3c595-2", "3Com595"), /* Vortex 100base-MII */
PCI_ROM(0x10b7, 0x9000, "3c900-tpo", "3Com900-TPO"), /* 10 Base TPO */
PCI_ROM(0x10b7, 0x9001, "3c900-t4", "3Com900-Combo"), /* 10/100 T4 */
PCI_ROM(0x10b7, 0x9004, "3c900b-tpo", "3Com900B-TPO"), /* 10 Base TPO */
PCI_ROM(0x10b7, 0x9005, "3c900b-combo", "3Com900B-Combo"), /* 10 Base Combo */
PCI_ROM(0x10b7, 0x9006, "3c900b-tpb2", "3Com900B-2/T"), /* 10 Base TP and Base2 */
PCI_ROM(0x10b7, 0x900a, "3c900b-fl", "3Com900B-FL"), /* 10 Base F */
PCI_ROM(0x10b7, 0x9800, "3c980-cyclone-1", "3Com980-Cyclone"), /* Cyclone */
PCI_ROM(0x10b7, 0x9805, "3c9805-1", "3Com9805"), /* Dual Port Server Cyclone */
PCI_ROM(0x10b7, 0x7646, "3csoho100-tx-1", "3CSOHO100-TX"), /* Hurricane */
PCI_ROM(0x10b7, 0x4500, "3c450-1", "3Com450 HomePNA Tornado"),
};
PCI_DRIVER ( t595_driver, t595_nics, PCI_NO_CLASS );
DRIVER ( "3C595", nic_driver, pci_driver, t595_driver,
t595_probe, t595_disable );
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
Reference in New Issue View Git Blame Copy Permalink