xCAT/xNBA
2
0
Fork 0
mirror of https://github.com/xcat2/xNBA.git synced 2024-11-22 17:41:55 +00:00
Code Issues Projects Releases Wiki Activity
9aa8a0b090
xNBA/contrib/vm/bochsrc.txt
Michael Brown 40044f9d43 [contrib] Enable bochs debug port by default 
Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-10-05 13:24:07 +01:00

1132 lines
51 KiB
Plaintext
Raw Blame History

# You may now use double quotes around pathnames, in case
# your pathname includes spaces.
#=======================================================================
# PLUGIN_CTRL:
# Controls the presence of optional device plugins. These plugins are loaded
# directly with this option and some of them install a config option that is
# only available when the plugin device is loaded. The value "1" means to load
# the plugin and "0" will unload it (if loaded before).
# These plugins are currently supported: 'biosdev', 'e1000', 'es1370',
# 'extfpuirq', 'gameport', 'iodebug', 'ne2k', 'parallel', 'pcidev', 'pcipnic',
# 'sb16', 'serial', 'speaker', 'unmapped', 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
#=======================================================================
plugin_ctrl: unmapped=1, biosdev=1, speaker=1, e1000=1, parallel=1, serial=1
#=======================================================================
# CONFIG_INTERFACE
#
# The configuration interface is a series of menus or dialog boxes that
# allows you to change all the settings that control Bochs's behavior.
# Depending on the platform there are up to 3 choices of configuration
# interface: a text mode version called "textconfig" and two graphical versions
# called "win32config" and "wx". The text mode version uses stdin/stdout and
# is always compiled in, unless Bochs is compiled for wx only. The choice
# "win32config" is only available on win32 and it is the default there.
# The choice "wx" is only available when you use "--with-wx" on the configure
# command. If you do not write a config_interface line, Bochs will
# choose a default for you.
#
# NOTE: if you use the "wx" configuration interface, you must also use
# the "wx" display library.
#=======================================================================
#config_interface: textconfig
#config_interface: win32config
#config_interface: wx
#=======================================================================
# DISPLAY_LIBRARY
#
# The display library is the code that displays the Bochs VGA screen. Bochs
# has a selection of about 10 different display library implementations for
# different platforms. If you run configure with multiple --with-* options,
# the display_library command lets you choose which one you want to run with.
# If you do not write a display_library line, Bochs will choose a default for
# you.
#
# The choices are:
# x use X windows interface, cross platform
# win32 use native win32 libraries
# carbon use Carbon library (for MacOS X)
# macintosh use MacOS pre-10
# amigaos use native AmigaOS libraries
# sdl use SDL library, cross platform
# svga use SVGALIB library for Linux, allows graphics without X11
# term text only, uses curses/ncurses library, cross platform
# rfb provides an interface to AT&T's VNC viewer, cross platform
# wx use wxWidgets library, cross platform
# nogui no display at all
#
# NOTE: if you use the "wx" configuration interface, you must also use
# the "wx" display library.
#
# Specific options:
# Some display libraries now support specific options to control their
# behaviour. These options are supported by more than one display library:
#
# "gui_debug" - use GTK debugger gui (sdl, x) / Win32 debugger gui (win32)
# "hideIPS" - disable IPS output in status bar (sdl, wx, x)
# "nokeyrepeat" - turn off host keyboard repeat (sdl, win32, x)
#
# See the examples below for other currently supported options.
#=======================================================================
#display_library: amigaos
#display_library: carbon
#display_library: macintosh
#display_library: nogui
#display_library: rfb, options="timeout=60" # time to wait for client
#display_library: sdl, options="fullscreen" # startup in fullscreen mode
#display_library: term
#display_library: win32
#display_library: wx
#display_library: x
#=======================================================================
# ROMIMAGE:
# The ROM BIOS controls what the PC does when it first powers on.
# Normally, you can use a precompiled BIOS in the source or binary
# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
# starting at address 0xf0000, and it is exactly 64k long. Another option
# is 128k BIOS which is loaded at address 0xe0000.
# You can also use the environment variable $BXSHARE to specify the
# location of the BIOS.
# The usage of external large BIOS images (up to 512k) at memory top is
# now supported, but we still recommend to use the BIOS distributed with
# Bochs. The start address optional, since it can be calculated from image size.
#=======================================================================
#romimage: file=$BXSHARE/BIOS-bochs-latest
#romimage: file=bios/seabios-1.6.3.bin
#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
romimage: file=bochs/bios/BIOS-bochs-latest
#=======================================================================
# CPU:
# This defines cpu-related parameters inside Bochs:
#
# MODEL:
# Selects CPU configuration to emulate from pre-defined list of all
# supported configurations. When this option is used, the CPUID option
# has no effect anymore.
#
# CPU configurations that can be selected:
# -----------------------------------------------------------------
# pentium_mmx Intel Pentium MMX
# amd_k6_2_chomper AMD-K6(tm) 3D processor (Chomper)
# p2_klamath Intel Pentium II (Klamath)
# p3_katmai Intel Pentium III (Katmai)
# p4_willamette Intel(R) Pentium(R) 4 (Willamette)
# core_duo_t2400_yonah Intel(R) Core(TM) Duo CPU T2400 (Yonah)
# atom_n270 Intel(R) Atom(TM) CPU N270
# athlon64_clawhammer AMD Athlon(tm) 64 Processor 2800+ (Clawhammer)
# athlon64_venice AMD Athlon(tm) 64 Processor 3000+ (Venice)
# turion64_tyler AMD Turion(tm) 64 X2 Mobile TL-60 (Tyler)
# phenom_8650_toliman AMD Phenom X3 8650 (Toliman)
# p4_prescott_celeron_336 Intel(R) Celeron(R) 336 (Prescott)
# core2_penryn_t9600 Intel Mobile Core 2 Duo T9600 (Penryn)
# corei5_lynnfield_750 Intel(R) Core(TM) i5 750 (Lynnfield)
# corei5_arrandale_m520 Intel(R) Core(TM) i5 M 520 (Arrandale)
# corei7_sandy_bridge_2600k Intel(R) Core(TM) i7-2600K (Sandy Bridge)
# corei7_ivy_bridge_3770k Intel(R) Core(TM) i7-3770K CPU (Ivy Bridge)
#
# COUNT:
# Set the number of processors:cores per processor:threads per core
# when Bochs is compiled for SMP emulation.
# Bochs currently supports up to 8 threads running simultaniosly.
# If Bochs is compiled without SMP support, it won't accept values
# different from 1.
#
# QUANTUM:
# Maximum amount of instructions allowed to execute by processor before
# returning control to another cpu. This option exists only in Bochs
# binary compiled with SMP support.
#
# RESET_ON_TRIPLE_FAULT:
# Reset the CPU when triple fault occur (highly recommended) rather than
# PANIC. Remember that if you trying to continue after triple fault the
# simulation will be completely bogus !
#
# CPUID_LIMIT_WINNT:
# Determine whether to limit maximum CPUID function to 2. This mode is
# required to workaround WinNT installation and boot issues.
#
# MSRS:
# Define path to user CPU Model Specific Registers (MSRs) specification.
# See example in msrs.def.
#
# IGNORE_BAD_MSRS:
# Ignore MSR references that Bochs does not understand; print a warning
# message instead of generating #GP exception. This option is enabled
# by default but will not be avaiable if configurable MSRs are enabled.
#
# MWAIT_IS_NOP:
# When this option is enabled MWAIT will not put the CPU into a sleep state.
# This option exists only if Bochs compiled with --enable-monitor-mwait.
#
# IPS:
# Emulated Instructions Per Second. This is the number of IPS that bochs
# is capable of running on your machine. You can recompile Bochs with
# --enable-show-ips option enabled, to find your host's capability.
# Measured IPS value will then be logged into your log file or shown
# in the status bar (if supported by the gui).
#
# IPS is used to calibrate many time-dependent events within the bochs
# simulation. For example, changing IPS affects the frequency of VGA
# updates, the duration of time before a key starts to autorepeat, and
# the measurement of BogoMips and other benchmarks.
#
# Examples:
#
# Bochs Machine/Compiler Mips
# ______________________________________________________________________
# 2.4.6 3.4Ghz Intel Core i7 2600 with Win7x64/g++ 4.5.2 85 to 95 Mips
# 2.3.7 3.2Ghz Intel Core 2 Q9770 with WinXP/g++ 3.4 50 to 55 Mips
# 2.3.7 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 38 to 43 Mips
# 2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 21 to 25 Mips
# 2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4 12 to 15 Mips
#=======================================================================
cpu: model=core2_penryn_t9600, count=1, ips=50000000, reset_on_triple_fault=1, ignore_bad_msrs=1, msrs="msrs.def"
cpu: cpuid_limit_winnt=0
#=======================================================================
# CPUID:
#
# This defines features and functionality supported by Bochs emulated CPU.
# The option has no offect if CPU model was selected in CPU option.
#
# MMX:
# Select MMX instruction set support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
#
# APIC:
# Select APIC configuration (LEGACY/XAPIC/XAPIC_EXT/X2APIC).
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
#
# SEP:
# Select SYSENTER/SYSEXIT instruction set support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# SSE:
# Select SSE instruction set support.
# Any of NONE/SSE/SSE2/SSE3/SSSE3/SSE4_1/SSE4_2 could be selected.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# SSE4A:
# Select AMD SSE4A instructions support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# AES:
# Select AES instruction set support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# MOVBE:
# Select MOVBE Intel(R) Atom instruction support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# XSAVE:
# Select XSAVE extensions support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# XSAVEOPT:
# Select XSAVEOPT instruction support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# AVX:
# Select AVX/AVX2 instruction set support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# AVX_F16C:
# Select AVX float16 convert instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# AVX_FMA:
# Select AVX fused multiply add (FMA) instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# BMI:
# Select BMI1/BMI2 instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# XOP:
# Select AMD XOP instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# FMA4:
# Select AMD four operand FMA instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# TBM:
# Select AMD Trailing Bit Manipulation (TBM) instructions support.
# This option exists only if Bochs compiled with --enable-avx option.
#
# X86-64:
# Enable x86-64 and long mode support.
# This option exists only if Bochs compiled with x86-64 support.
#
# 1G_PAGES:
# Enable 1G page size support in long mode.
# This option exists only if Bochs compiled with x86-64 support.
#
# PCID:
# Enable Process-Context Identifiers (PCID) support in long mode.
# This option exists only if Bochs compiled with x86-64 support.
#
# FSGSBASE:
# Enable GS/GS BASE access instructions support in long mode.
# This option exists only if Bochs compiled with x86-64 support.
#
# SMEP:
# Enable Supervisor Mode Execution Protection (SMEP) support.
# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
#
# MWAIT:
# Select MONITOR/MWAIT instructions support.
# This option exists only if Bochs compiled with --enable-monitor-mwait.
#
# VMX:
# Select VMX extensions emulation support.
# This option exists only if Bochs compiled with --enable-vmx option.
#
# VENDOR_STRING:
# Set the CPUID vendor string returned by CPUID(0x0). This should be a
# twelve-character ASCII string.
#
# BRAND_STRING:
# Set the CPUID vendor string returned by CPUID(0x80000002 .. 0x80000004).
# This should be at most a forty-eight-character ASCII string.
#
# FAMILY:
# Set model information returned by CPUID. Default family value determined
# by configure option --enable-cpu-level.
#
# MODEL:
# Set model information returned by CPUID. Default model value is 3.
#
# STEPPING:
# Set stepping information returned by CPUID. Default stepping value is 3.
#=======================================================================
#cpuid: x86_64=1, mmx=1, sep=1, sse=sse4_2, apic=xapic, aes=1, movbe=1, xsave=1
#cpuid: family=6, model=0x1a, stepping=5
#=======================================================================
# MEMORY
# Set the amount of physical memory you want to emulate.
#
# GUEST:
# Set amount of guest physical memory to emulate. The default is 32MB,
# the maximum amount limited only by physical address space limitations.
#
# HOST:
# Set amount of host memory you want to allocate for guest RAM emulation.
# It is possible to allocate less memory than you want to emulate in guest
# system. This will fake guest to see the non-existing memory. Once guest
# system touches new memory block it will be dynamically taken from the
# memory pool. You will be warned (by FATAL PANIC) in case guest already
# used all allocated host memory and wants more.
#
#=======================================================================
memory: guest=512, host=256
#=======================================================================
# OPTROMIMAGE[1-4]:
# You may now load up to 4 optional ROM images. Be sure to use a
# read-only area, typically between C8000 and EFFFF. These optional
# ROM images should not overwrite the rombios (located at
# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
# Those ROM images will be initialized by the bios if they contain
# the right signature (0x55AA) and a valid checksum.
# It can also be a convenient way to upload some arbitrary code/data
# in the simulation, that can be retrieved by the boot loader
#=======================================================================
#optromimage1: file=optionalrom.bin, address=0xd0000
#optromimage2: file=optionalrom.bin, address=0xd1000
#optromimage3: file=optionalrom.bin, address=0xd2000
#optromimage4: file=optionalrom.bin, address=0xd3000
optromimage1: file=../../src/bin/intel.rom, address=0xcb000
#optramimage1: file=/path/file1.img, address=0x0010000
#optramimage2: file=/path/file2.img, address=0x0020000
#optramimage3: file=/path/file3.img, address=0x0030000
#optramimage4: file=/path/file4.img, address=0x0040000
#=======================================================================
# VGAROMIMAGE
# You now need to load a VGA ROM BIOS into C0000.
#=======================================================================
#vgaromimage: file=bios/VGABIOS-elpin-2.40
#vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest
#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
vgaromimage: file=bochs/bios/VGABIOS-lgpl-latest
#=======================================================================
# VGA:
# This defines parameters related to the VGA display
#
# EXTENSION
# Here you can specify the display extension to be used. With the value
# 'none' you can use standard VGA with no extension. Other supported
# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
#
# UPDATE_FREQ
# The VGA update frequency is based on the emulated clock and the default
# value is 5. Keep in mind that you must tweak the 'cpu: ips=N' directive
# to be as close to the number of emulated instructions-per-second your
# workstation can do, for this to be accurate. If the realtime sync is
# enabled with the 'clock' option, the value is based on the real time.
# This parameter can be changed at runtime.
#
# Examples:
# vga: extension=cirrus, update_freq=10
#=======================================================================
#vga: extension=vbe, update_freq=5
#=======================================================================
# FLOPPYA:
# Point this to pathname of floppy image file or device
# This should be of a bootable floppy(image/device) if you're
# booting from 'a' (or 'floppy').
#
# You can set the initial status of the media to 'ejected' or 'inserted'.
# floppya: 2_88=path, status=ejected (2.88M 3.5" media)
# floppya: 1_44=path, status=inserted (1.44M 3.5" media)
# floppya: 1_2=path, status=ejected (1.2M 5.25" media)
# floppya: 720k=path, status=inserted (720K 3.5" media)
# floppya: 360k=path, status=inserted (360K 5.25" media)
# floppya: 320k=path, status=inserted (320K 5.25" media)
# floppya: 180k=path, status=inserted (180K 5.25" media)
# floppya: 160k=path, status=inserted (160K 5.25" media)
# floppya: image=path, status=inserted (guess media type from image size)
# floppya: 1_44=vvfat:path, status=inserted (use directory as VFAT media)
# floppya: type=1_44 (1.44M 3.5" floppy drive, no media)
#
# The path should be the name of a disk image file. On Unix, you can use a raw
# device name such as /dev/fd0 on Linux. On win32 platforms, use drive letters
# such as a: or b: as the path. The parameter 'image' works with image files
# only. In that case the size must match one of the supported types.
# The parameter 'type' can be used to enable the floppy drive without media
# and status specified. Usually the drive type is set up based on the media type.
# The optional parameter 'write_protected' can be used to control the media
# write protect switch. By default it is turned off.
#=======================================================================
#floppya: 1_44=/dev/fd0, status=inserted
#floppya: image=../1.44, status=inserted
#floppya: 1_44=/dev/fd0H1440, status=inserted
#floppya: 1_2=../1_2, status=inserted
#floppya: 1_44=a:, status=inserted
#floppya: 1_44=a.img, status=inserted, write_protected=1
#floppya: 1_44=/dev/rfd0a, status=inserted
floppya: 1_44=../../src/bin/ipxe.dsk, status=inserted
#=======================================================================
# FLOPPYB:
# See FLOPPYA above for syntax
#=======================================================================
#floppyb: 1_44=b:, status=inserted
#floppyb: 1_44=b.img, status=inserted
#=======================================================================
# ATA0, ATA1, ATA2, ATA3
# ATA controller for hard disks and cdroms
#
# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
#
# These options enables up to 4 ata channels. For each channel
# the two base io addresses and the irq must be specified.
#
# ata0 and ata1 are enabled by default with the values shown below
#
# Examples:
# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
#=======================================================================
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
#=======================================================================
# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
#
# This defines the type and characteristics of all attached ata devices:
# type= type of attached device [disk|cdrom]
# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3]
# mode= only valid for disks [undoable|growing|volatile|vvfat]
# path= path of the image / directory
# cylinders= only valid for disks
# heads= only valid for disks
# spt= only valid for disks
# status= only valid for cdroms [inserted|ejected]
# biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
# translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
# model= string returned by identify device command
# journal= optional filename of the redolog for undoable, volatile and vvfat disks
#
# Point this at a hard disk image file, cdrom iso file, or physical cdrom
# device. To create a hard disk image, try running bximage. It will help you
# choose the size and then suggest a line that works with it.
#
# In UNIX it may be possible to use a raw device as a Bochs hard disk,
# but WE DON'T RECOMMEND IT. In Windows there is no easy way.
#
# In windows, the drive letter + colon notation should be used for cdroms.
# Depending on versions of windows and drivers, you may only be able to
# access the "first" cdrom in the system. On MacOSX, use path="drive"
# to access the physical drive.
#
# The path is mandatory for hard disks. Disk geometry autodetection works with
# images created by bximage if CHS is set to 0/0/0 (cylinders are calculated
# using heads=16 and spt=63). For other hard disk images and modes the
# cylinders, heads, and spt are mandatory. In all cases the disk size reported
# from the image must be exactly C*H*S*512.
#
# Default values are:
# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
#
# The biosdetect option has currently no effect on the bios
#
# Examples:
# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
# ata3-slave: type=cdrom, path=iso.sample, status=inserted
#=======================================================================
#ata0-master: type=disk, mode=flat, path="30M.sample"
#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
#ata0-master: type=disk, mode=flat, path="c.img", cylinders=0 # autodetect
#ata0-slave: type=disk, mode=vvfat, path=/bochs/images/vvfat, journal=vvfat.redolog
#ata0-slave: type=cdrom, path=D:, status=inserted
#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
#ata0-slave: type=cdrom, path="drive", status=inserted
#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted
#=======================================================================
# BOOT:
# This defines the boot sequence. Now you can specify up to 3 boot drives,
# which can be 'floppy', 'disk', 'cdrom' or 'network' (boot ROM).
# Legacy 'a' and 'c' are also supported.
# Examples:
# boot: floppy
# boot: cdrom, disk
# boot: network, disk
# boot: cdrom, floppy, disk
#=======================================================================
#boot: floppy
#boot: disk
boot: network, floppy
#=======================================================================
# CLOCK:
# This defines the parameters of the clock inside Bochs:
#
# SYNC:
# This defines the method how to synchronize the Bochs internal time
# with realtime. With the value 'none' the Bochs time relies on the IPS
# value and no host time synchronization is used. The 'slowdown' method
# sacrifices performance to preserve reproducibility while allowing host
# time correlation. The 'realtime' method sacrifices reproducibility to
# preserve performance and host-time correlation.
# It is possible to enable both synchronization methods.
#
# RTC_SYNC:
# If this option is enabled together with the realtime synchronization,
# the RTC runs at realtime speed. This feature is disabled by default.
#
# TIME0:
# Specifies the start (boot) time of the virtual machine. Use a time
# value as returned by the time(2) system call. If no time0 value is
# set or if time0 equal to 1 (special case) or if time0 equal 'local',
# the simulation will be started at the current local host time.
# If time0 equal to 2 (special case) or if time0 equal 'utc',
# the simulation will be started at the current utc time.
#
# Syntax:
# clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
#
# Example:
# clock: sync=none, time0=local # Now (localtime)
# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980
# clock: sync=none, time0=631148400 # Mon Jan 1 00:00:00 1990
# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999
# clock: sync=realtime, time0=946681200 # Sat Jan 1 00:00:00 2000
# clock: sync=none, time0=1 # Now (localtime)
# clock: sync=none, time0=utc # Now (utc/gmt)
#
# Default value are sync=none, time0=local
#=======================================================================
#clock: sync=none, time0=local
#=======================================================================
# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
# Enables or disables the 0xaa55 signature check on boot floppies
# Defaults to disabled=0
# Examples:
# floppy_bootsig_check: disabled=0
# floppy_bootsig_check: disabled=1
#=======================================================================
floppy_bootsig_check: disabled=0
#=======================================================================
# LOG:
# Give the path of the log file you'd like Bochs debug and misc. verbiage
# to be written to. If you don't use this option or set the filename to
# '-' the output is written to the console. If you really don't want it,
# make it "/dev/null" (Unix) or "nul" (win32). :^(
#
# Examples:
# log: ./bochs.out
# log: /dev/tty
#=======================================================================
#log: /dev/null
log: bochsout.txt
#=======================================================================
# LOGPREFIX:
# This handles the format of the string prepended to each log line.
# You may use those special tokens :
# %t : 11 decimal digits timer tick
# %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
# %d : 5 characters string of the device, between brackets
#
# Default : %t%e%d
# Examples:
# logprefix: %t-%e-@%i-%d
# logprefix: %i%e%d
#=======================================================================
#logprefix: %t%e%d
#=======================================================================
# LOG CONTROLS
#
# Bochs has four severity levels for event logging.
# panic: cannot proceed. If you choose to continue after a panic,
# don't be surprised if you get strange behavior or crashes.
# error: something went wrong, but it is probably safe to continue the
# simulation.
# info: interesting or useful messages.
# debug: messages useful only when debugging the code. This may
# spit out thousands per second.
#
# For events of each level, you can choose to exit Bochs ('fatal'), 'report'
# or 'ignore'. On some guis you have the additional choice 'ask'. A gui dialog
# appears asks how to proceed.
#
# It is also possible to specify the 'action' to do for each Bochs facility
# separately (e.g. crash on panics from everything except the cdrom, and only
# report those). See the 'log function' module list in the user documentation.
#
# If you are experiencing many panics, it can be helpful to change
# the panic action to report instead of fatal. However, be aware
# that anything executed after a panic is uncharted territory and can
# cause bochs to become unstable. The panic is a "graceful exit," so
# if you disable it you may get a spectacular disaster instead.
#=======================================================================
panic: action=ask
error: action=report
info: action=report
debug: action=ignore, pci=report # report BX_DEBUG from module 'pci'
#=======================================================================
# DEBUGGER_LOG:
# Give the path of the log file you'd like Bochs to log debugger output.
# If you really don't want it, make it /dev/null or '-'. :^(
#
# Examples:
# debugger_log: ./debugger.out
#=======================================================================
#debugger_log: /dev/null
#debugger_log: debugger.out
debugger_log: -
#=======================================================================
# COM1, COM2, COM3, COM4:
# This defines a serial port (UART type 16550A). In the 'term' you can specify
# a device to use as com1. This can be a real serial line, or a pty. To use
# a pty (under X/Unix), create two windows (xterms, usually). One of them will
# run bochs, and the other will act as com1. Find out the tty the com1
# window using the `tty' command, and use that as the `dev' parameter.
# Then do `sleep 1000000' in the com1 window to keep the shell from
# messing with things, and run bochs in the other window. Serial I/O to
# com1 (port 0x3f8) will all go to the other window.
# In socket* and pipe* (win32 only) modes Bochs becomes either socket/named pipe
# client or server. In client mode it connects to an already running server (if
# connection fails Bochs treats com port as not connected). In server mode it
# opens socket/named pipe and waits until a client application connects to it
# before starting simulation. This mode is useful for remote debugging (e.g.
# with gdb's "target remote host:port" command or windbg's command line option
# -k com:pipe,port=\\.\pipe\pipename). Note: 'socket' is a shorthand for
# 'socket-client' and 'pipe' for 'pipe-client'. Socket modes use simple TCP
# communication, pipe modes use duplex byte mode pipes.
# Other serial modes are 'null' (no input/output), 'file' (output to a file
# specified as the 'dev' parameter), 'raw' (use the real serial port - under
# construction for win32), 'mouse' (standard serial mouse - requires
# mouse option setting 'type=serial', 'type=serial_wheel' or 'type=serial_msys').
#
# Examples:
# com1: enabled=1, mode=null
# com1: enabled=1, mode=mouse
# com2: enabled=1, mode=file, dev=serial.out
# com3: enabled=1, mode=raw, dev=com1
# com3: enabled=1, mode=socket-client, dev=localhost:8888
# com3: enabled=1, mode=socket-server, dev=localhost:8888
# com4: enabled=1, mode=pipe-client, dev=\\.\pipe\mypipe
# com4: enabled=1, mode=pipe-server, dev=\\.\pipe\mypipe
#=======================================================================
#com1: enabled=1, mode=term, dev=/dev/ttyp9
#=======================================================================
# PARPORT1, PARPORT2:
# This defines a parallel (printer) port. When turned on and an output file is
# defined the emulated printer port sends characters printed by the guest OS
# into the output file. On some platforms a device filename can be used to
# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
# win32 platforms).
#
# Examples:
# parport1: enabled=1, file="parport.out"
# parport2: enabled=1, file="/dev/lp0"
# parport1: enabled=0
#=======================================================================
parport1: enabled=1, file="parport.out"
#=======================================================================
# SB16:
# This defines the SB16 sound emulation. It can have several of the
# following properties.
# All properties are in the format sb16: property=value
# enabled:
# This optional property controls the presence of the SB16 emulation.
# The emulation is turned on unless this property is used and set to 0.
# midi: The filename is where the midi data is sent. This can be a
# device or just a file if you want to record the midi data.
# midimode:
# 0=no data
# 1=output to device (system dependent. midi denotes the device driver)
# 2=SMF file output, including headers
# 3=output the midi data stream to the file (no midi headers and no
# delta times, just command and data bytes)
# wave: This is the device/file where wave output is stored
# wavemode:
# 0=no data
# 1=output to device (system dependent. wave denotes the device driver)
# 2=VOC file output, incl. headers
# 3=output the raw wave stream to the file
# log: The file to write the sb16 emulator messages to.
# loglevel:
# 0=no log
# 1=resource changes, midi program and bank changes
# 2=severe errors
# 3=all errors
# 4=all errors plus all port accesses
# 5=all errors and port accesses plus a lot of extra info
# dmatimer:
# microseconds per second for a DMA cycle. Make it smaller to fix
# non-continuous sound. 750000 is usually a good value. This needs a
# reasonably correct setting for the IPS parameter of the CPU option.
#
# Examples for output devices:
# sb16: midimode=1, midi="", wavemode=1, wave="" # win32
# sb16: midimode=1, midi=alsa:128:0, wavemode=1, wave=alsa # Linux with ALSA
#=======================================================================
#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
#=======================================================================
# ES1370:
# This defines the ES1370 sound emulation. The parameter 'enabled' controls the
# presence of the device. In addition to this, it must be loaded with 'plugin_ctrl'
# and assigned to a PCI slot. The 'wavedev' parameter is similar to the 'wave'
# parameter of the SB16 soundcard. The emulation supports recording and playback
# (except DAC1+DAC2 output at the same time).
#
# Examples:
# es1370: enabled=1, wavedev="" # win32
# es1370: enabled=1, wavedev=alsa # Linux with ALSA
#=======================================================================
#es1370: enabled=1, wavedev=alsa
#=======================================================================
# KEYBOARD_SERIAL_DELAY:
# Approximate time in microseconds that it takes one character to
# be transfered from the keyboard to controller over the serial path.
# Examples:
# keyboard_serial_delay: 200
#=======================================================================
keyboard_serial_delay: 250
#=======================================================================
# KEYBOARD_PASTE_DELAY:
# Approximate time in microseconds between attempts to paste
# characters to the keyboard controller. This leaves time for the
# guest os to deal with the flow of characters. The ideal setting
# depends on how your operating system processes characters. The
# default of 100000 usec (.1 seconds) was chosen because it works
# consistently in Windows.
#
# If your OS is losing characters during a paste, increase the paste
# delay until it stops losing characters.
#
# Examples:
# keyboard_paste_delay: 100000
#=======================================================================
keyboard_paste_delay: 100000
#=======================================================================
# MOUSE:
# This defines parameters for the emulated mouse type, the initial status
# of the mouse capture and the runtime method to toggle it.
#
# TYPE:
# With the mouse type option you can select the type of mouse to emulate.
# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
# on PS/2), 'serial', 'serial_wheel' and 'serial_msys' (one com port requires
# setting 'mode=mouse'). To connect a mouse to an USB port, see the 'usb_uhci',
# 'usb_ohci' or 'usb_xhci' options (requires PCI and USB support).
#
# ENABLED:
# The Bochs gui creates mouse "events" unless the 'enabled' option is
# set to 0. The hardware emulation itself is not disabled by this.
# Unless you have a particular reason for enabling the mouse by default,
# it is recommended that you leave it off. You can also toggle the mouse
# usage at runtime (RFB, SDL, Win32, wxWidgets and X11 - see below).
#
# TOGGLE:
# The default method to toggle the mouse capture at runtime is to press the
# CTRL key and the middle mouse button ('ctrl+mbutton'). This option allows
# to change the method to 'ctrl+f10' (like DOSBox), 'ctrl+alt' (like QEMU)
# or 'f12' (replaces win32 'legacyF12' option).
#
# Examples:
# mouse: enabled=1
# mouse: type=imps2, enabled=1
# mouse: type=serial, enabled=1
# mouse: enabled=0, toggle=ctrl+f10
#=======================================================================
mouse: enabled=0
#=======================================================================
# private_colormap: Request that the GUI create and use it's own
# non-shared colormap. This colormap will be used
# when in the bochs window. If not enabled, a
# shared colormap scheme may be used. Not implemented
# on all GUI's.
#
# Examples:
# private_colormap: enabled=1
# private_colormap: enabled=0
#=======================================================================
private_colormap: enabled=0
#=======================================================================
# fullscreen: ONLY IMPLEMENTED ON AMIGA
# Request that Bochs occupy the entire screen instead of a
# window.
#
# Examples:
# fullscreen: enabled=0
# fullscreen: enabled=1
#=======================================================================
#fullscreen: enabled=0
#screenmode: name="sample"
#=======================================================================
# ne2k: NE2000 compatible ethernet adapter
#
# Format:
# ne2k: enabled=1, ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE,
# ethdev=DEVICE, script=SCRIPT, bootrom=BOOTROM
#
# IOADDR, IRQ: You probably won't need to change ioaddr and irq, unless there
# are IRQ conflicts. These arguments are ignored when assign the ne2k to a
# PCI slot.
#
# MAC: The MAC address MUST NOT match the address of any machine on the net.
# Also, the first byte must be an even number (bit 0 set means a multicast
# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may
# be other restrictions too. To be safe, just use the b0:c4... address.
#
# ETHDEV: The ethdev value is the name of the network interface on your host
# platform. On UNIX machines, you can get the name by running ifconfig. On
# Windows machines, you must run niclist to get the name of the ethdev.
# Niclist source code is in misc/niclist.c and it is included in Windows
# binary releases.
#
# SCRIPT: The script value is optional, and is the name of a script that
# is executed after bochs initialize the network interface. You can use
# this script to configure this network interface, or enable masquerading.
# This is mainly useful for the tun/tap devices that only exist during
# Bochs execution. The network interface name is supplied to the script
# as first parameter.
#
# BOOTROM: The bootrom value is optional, and is the name of the ROM image
# to load. Note that this feature is only implemented for the PCI version of
# the NE2000.
#
# If you don't want to make connections to any physical networks,
# you can use the following 'ethmod's to simulate a virtual network.
# null: All packets are discarded, but logged to a few files.
# vde: Virtual Distributed Ethernet
# vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
# The virtual host uses 192.168.10.1.
# DHCP assigns 192.168.10.2 to the guest.
# TFTP uses the 'ethdev' value for the root directory and doesn't
# overwrite files.
#
#=======================================================================
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
# ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=/usr/local/bin/slirp, bootrom=ne2k_pci.rom
#=======================================================================
# pnic: Bochs/Etherboot pseudo-NIC
#
# Format:
# pnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
# bootrom=BOOTROM
#
# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script,
# bootrom) and supports the same networking modules as the NE2000 adapter.
# In addition to this, it must be loaded with 'plugin_ctrl' and assigned
# to a PCI slot.
#=======================================================================
#pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
#=======================================================================
# e1000: Intel(R) 82540EM Gigabit Ethernet adapter
#
# Format:
# e1000: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
# bootrom=BOOTROM
#
# The E1000 accepts the same syntax (for mac, ethmod, ethdev, script, bootrom)
# and supports the same networking modules as the NE2000 adapter. In addition
# to this, it must be loaded with 'plugin_ctrl' and assigned to a PCI slot.
#=======================================================================
#e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=/usr/local/bin/slirp
e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=tuntap, ethdev=/dev/net/tun:tap0
#=======================================================================
# KEYBOARD_MAPPING:
# This enables a remap of a physical localized keyboard to a
# virtualized us keyboard, as the PC architecture expects.
# If enabled, the keymap file must be specified.
#
# Examples:
# keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
#=======================================================================
keyboard_mapping: enabled=0, map=
#=======================================================================
# KEYBOARD_TYPE:
# Type of keyboard return by a "identify keyboard" command to the
# keyboard controler. It must be one of "xt", "at" or "mf".
# Defaults to "mf". It should be ok for almost everybody. A known
# exception is french macs, that do have a "at"-like keyboard.
#
# Examples:
# keyboard_type: mf
#=======================================================================
#keyboard_type: mf
#=======================================================================
# USER_SHORTCUT:
# This defines the keyboard shortcut to be sent when you press the "user"
# button in the headerbar. The shortcut string is a combination of maximum
# 3 key names (listed below) separated with a '-' character.
# Valid key names:
# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
# "plus", "right", "shift", "space", "tab", "up", "win", "print" and "power".
#
# Example:
# user_shortcut: keys=ctrl-alt-del
#=======================================================================
#user_shortcut: keys=ctrl-alt-del
#=======================================================================
# PCI:
# This option controls the presence of a PCI chipset in Bochs. Currently it only
# supports the i440FX chipset. You can also specify the devices connected to
# PCI slots. Up to 5 slots are available. These devices are currently supported:
# cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
#
# Example:
# pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
#=======================================================================
pci: enabled=1, chipset=i440fx, slot1=e1000
#=======================================================================
# USB_UHCI:
# This option controls the presence of the USB root hub which is a part
# of the i440FX PCI chipset. With the portX parameter you can connect devices
# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom'
# 'hub' and 'printer'). NOTE: UHCI must be loaded with 'plugin_ctrl'.
#
# The optionsX parameter can be used to assign specific options to the device
# connected to the corresponding USB port. Currently this feature is only used
# to set the speed reported by device and by the 'disk' device to specify
# an alternative redolog file of some image modes.
#
# If you connect the mouse or tablet to one of the ports, Bochs forwards the
# mouse movement data to the USB device instead of the selected mouse type.
# When connecting the keypad to one of the ports, Bochs forwards the input of
# the numeric keypad to the USB device instead of the PS/2 keyboard.
#
# To connect a 'flat' mode image as an USB hardisk you can use the 'disk' device
# with the path to the image separated with a colon. To use other disk image modes
# similar to ATA disks the syntax 'disk:mode:filename' must be used (see below).
#
# To emulate an USB cdrom you can use the 'cdrom' device name and the path to
# an ISO image or raw device name also separated with a colon. An option to
# insert/eject media is available in the runtime configuration.
#
# The device name 'hub' connects an external hub with max. 8 ports (default: 4)
# to the root hub. To specify the number of ports you have to add the value
# separated with a colon. Connecting devices to the external hub ports is only
# available in the runtime configuration.
#
# The device 'printer' emulates the HP Deskjet 920C printer. The PCL data is
# sent to a file specified in bochsrc.txt. The current code appends the PCL
# code to the file if the file already existed. It would probably be nice to
# overwrite the file instead, asking user first.
#=======================================================================
#usb_uhci: enabled=1
#usb_uhci: enabled=1, port1=mouse, port2=disk:usbstick.img
#usb_uhci: enabled=1, port1=hub:7, port2=disk:growing:usbdisk.img
#usb_uhci: enabled=1, port2=disk:undoable:usbdisk.img, options1=journal:redo.log
#usb_uhci: enabled=1, port1=printer:printdata.bin, port2=cdrom:image.iso
#=======================================================================
# USB_OHCI:
# This option controls the presence of the USB OHCI host controller with a
# 2-port hub. The portX option accepts the same device types with the same
# syntax as the UHCI controller (see above). The OHCI HC must be assigned to
# a PCI slot and loaded with 'plugin_ctrl'.
#=======================================================================
#usb_ohci: enabled=1
#usb_ohci: enabled=1, port1=printer:usbprinter.bin
#=======================================================================
# USB_XHCI:
# This option controls the presence of the experimental USB xHCI host controller
# with a 4-port hub. The portX option accepts the same device types with the
# same syntax as the UHCI controller (see above). The xHCI HC must be assigned
# to a PCI slot and loaded with 'plugin_ctrl'.
#=======================================================================
#usb_xhci: enabled=1
#=======================================================================
# CMOSIMAGE:
# This defines image file that can be loaded into the CMOS RAM at startup.
# The rtc_init parameter controls whether initialize the RTC with values stored
# in the image. By default the time0 argument given to the clock option is used.
# With 'rtc_init=image' the image is the source for the initial time.
#
# Example:
# cmosimage: file=cmos.img, rtc_init=image
#=======================================================================
#cmosimage: file=cmos.img, rtc_init=time0
#=======================================================================
# MAGIC_BREAK:
# This enables the "magic breakpoint" feature when using the debugger.
# The useless cpu instruction XCHG BX, BX causes Bochs to enter the
# debugger mode. This might be useful for software development.
#
# Example:
# magic_break: enabled=1
#=======================================================================
#magic_break: enabled=1
magic_break: enabled=1
#=======================================================================
# PORT_E9_HACK:
# The 0xE9 port doesn't exists in normal ISA architecture. However, we
# define a convention here, to display on the console of the system running
# Bochs anything that is written to it. The idea is to provide debug output
# very early when writing BIOS or OS code for example, without having to
# bother with setting up a serial port or etc. Reading from port 0xE9 will
# will return 0xe9 to let you know if the feature is available.
# Leave this 0 unless you have a reason to use it.
#
# Example:
# port_e9_hack: enabled=1
#=======================================================================
port_e9_hack: enabled=1
#=======================================================================
# DEBUG_SYMBOLS:
# This loads symbols from the specified file for use in Bochs' internal
# debugger. Symbols are loaded into global context. This is equivalent to
# issuing ldsym debugger command at start up.
#
# Example:
# debug_symbols: file="kernel.sym"
# debug_symbols: file="kernel.sym", offset=0x80000000
#=======================================================================
#debug_symbols: file="kernel.sym"
#=======================================================================
# other stuff
#=======================================================================
#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
#print_timestamps: enabled=1
#-------------------------
# PCI host device mapping
#-------------------------
#pcidev: vendor=0x1234, device=0x5678
#=======================================================================
# GDBSTUB:
# Enable GDB stub. See user documentation for details.
# Default value is enabled=0.
#=======================================================================
#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
#=======================================================================
# USER_PLUGIN:
# Load user-defined plugin. This option is available only if Bochs is
# compiled with plugin support. Maximum 8 different plugins are supported.
# See the example in the Bochs sources how to write a plugin device.
#=======================================================================
#user_plugin: name=testdev
#=======================================================================
# for Macintosh, use the style of pathnames in the following
# examples.
#
# vgaromimage: :bios:VGABIOS-elpin-2.40
# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
# floppya: 1_44=[fd:], status=inserted
#=======================================================================
#=======================================================================
# MEGS
# Set the number of Megabytes of physical memory you want to emulate.
# The default is 32MB, most OS's won't need more than that.
# The maximum amount of memory supported is 2048Mb.
# The 'MEGS' option is deprecated. Use 'MEMORY' option instead.
#=======================================================================
#megs: 256
#megs: 128
#megs: 64
#megs: 32
#megs: 16
#megs: 8
Reference in New Issue View Git Blame Copy Permalink