mirror of
https://github.com/xcat2/xNBA.git
synced 2024-12-15 07:41:45 +00:00
153 lines
3.1 KiB
C
153 lines
3.1 KiB
C
/*
|
|
Kernel module for the dp83820 flash write utility. This code was written
|
|
by Dave Ashley for NXTV, Inc.
|
|
Copyright 2004 by NXTV, Inc.
|
|
Written 20040219 by Dave Ashley.
|
|
|
|
This code is released under the terms of the GPL. No warranty.
|
|
|
|
THEORY: The dp83820 bootrom interface is flawed in that you can't
|
|
read or write a single byte at a time, and this is required in order
|
|
to write to flash devices like the AT29C512. So the workaround is
|
|
to use the chips ability to map into memory the bootrom, then the cpu
|
|
can directly do byte accesses.
|
|
|
|
The problem is that a "feature" of the dp83820 is that when you map
|
|
in the bootrom, you conveniently lose access to the PCI registers.
|
|
So we need to do this in kernel space and wrap every access to the
|
|
bootrom within interrupt_disable/restore, in case a network interrupt
|
|
were to come in.
|
|
|
|
This kernel module is very simple, it just creates a proc file
|
|
/proc/dp83820
|
|
If you write 3 bytes to this file you are doing a write to the flashrom:
|
|
|
|
Byte 1 2 3
|
|
ALOW AHIGH DATA
|
|
|
|
If you write 2 bytes to this file you are doing a read from the flashrom:
|
|
Byte 1 2
|
|
ALOW AHIGH
|
|
Then the next read from the file will return a single byte of what
|
|
was at that location.
|
|
|
|
You only get one shot at accessing the proc file, you need to then
|
|
close/open if you want to do another access. This could probably be
|
|
cleaned up pretty easily so more accesses can be done without having
|
|
to close/open the file.
|
|
|
|
*/
|
|
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/module.h>
|
|
|
|
|
|
#define PROCNAME "dp83820"
|
|
|
|
struct pci_dev *mydev=0;
|
|
unsigned long loc;
|
|
unsigned char *addr=0;
|
|
|
|
unsigned char lastread;
|
|
|
|
|
|
int my_read_proc(char *buf, char **start,off_t offset,int count, int *eof,void *data)
|
|
{
|
|
int retval=0;
|
|
|
|
if(count>0)
|
|
{
|
|
buf[0]=lastread;
|
|
retval=1;
|
|
}
|
|
|
|
*eof=1;
|
|
|
|
return retval;
|
|
}
|
|
|
|
int my_write_proc(struct file *file, const char *buffer, unsigned long count,
|
|
void *data)
|
|
{
|
|
unsigned char *msg;
|
|
|
|
unsigned long flags;
|
|
|
|
msg=(void *)buffer;
|
|
save_flags(flags);
|
|
cli();
|
|
pci_write_config_dword(mydev, 0x30, loc | 1);
|
|
|
|
switch(count)
|
|
{
|
|
case 2:
|
|
lastread=addr[msg[0] | (msg[1]<<8)];
|
|
break;
|
|
case 3:
|
|
addr[msg[0] | (msg[1]<<8)] = msg[2];
|
|
break;
|
|
}
|
|
pci_write_config_dword(mydev, 0x30, loc);
|
|
restore_flags(flags);
|
|
return count;
|
|
}
|
|
|
|
|
|
struct proc_dir_entry *de=0;
|
|
|
|
int __init init_module(void)
|
|
{
|
|
int found=0;
|
|
mydev=0;
|
|
pci_for_each_dev(mydev)
|
|
{
|
|
if(mydev->vendor==0x100b && mydev->device==0x0022)
|
|
{
|
|
found=1;
|
|
break;
|
|
}
|
|
}
|
|
if(!found)
|
|
{
|
|
printk("Could not find DP83820 network device\n");
|
|
return ENODEV;
|
|
}
|
|
|
|
de=create_proc_entry(PROCNAME,0,0);
|
|
if(!de)
|
|
return -1;
|
|
de->data=0;
|
|
de->read_proc=my_read_proc;
|
|
de->write_proc=my_write_proc;
|
|
|
|
loc=mydev->resource[PCI_ROM_RESOURCE].start;
|
|
addr=ioremap_nocache(loc,0x10000);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cleanup_module(void)
|
|
{
|
|
if(de)
|
|
{
|
|
remove_proc_entry(PROCNAME,0);
|
|
de=0;
|
|
}
|
|
if(addr)
|
|
{
|
|
iounmap(addr);
|
|
addr=0;
|
|
}
|
|
}
|
|
|