xCAT/xNBA
2
0
Fork 0
mirror of https://github.com/xcat2/xNBA.git synced 2024-12-16 16:21:32 +00:00
Code Issues Projects Releases Wiki Activity
3d6123e69a
xNBA/src/drivers/net/ns8390.c
Michael Brown 3d6123e69a Initial revision
2005-03-08 18:53:11 +00:00

1017 lines
31 KiB
C
Raw Blame History

/**************************************************************************
ETHERBOOT - BOOTP/TFTP Bootstrap Program
Author: Martin Renters
Date: May/94
This code is based heavily on David Greenman's if_ed.c driver
Copyright (C) 1993-1994, David Greenman, Martin Renters.
This software may be used, modified, copied, distributed, and sold, in
both source and binary form provided that the above copyright and these
terms are retained. Under no circumstances are the authors responsible for
the proper functioning of this software, nor do the authors assume any
responsibility for damages incurred with its use.
Multicast support added by Timothy Legge (timlegge@users.sourceforge.net) 09/28/2003
Relocation support added by Ken Yap (ken_yap@users.sourceforge.net) 28/12/02
3c503 support added by Bill Paul (wpaul@ctr.columbia.edu) on 11/15/94
SMC8416 support added by Bill Paul (wpaul@ctr.columbia.edu) on 12/25/94
3c503 PIO support added by Jim Hague (jim.hague@acm.org) on 2/17/98
RX overrun by Klaus Espenlaub (espenlaub@informatik.uni-ulm.de) on 3/10/99
parts taken from the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
SMC8416 PIO support added by Andrew Bettison (andrewb@zip.com.au) on 4/3/02
based on the Linux 8390 driver (by Donald Becker and Paul Gortmaker)
**************************************************************************/
#include "etherboot.h"
#include "nic.h"
#include "ns8390.h"
#ifdef INCLUDE_NS8390
#include "pci.h"
#else
#include "isa.h"
#endif
static unsigned char eth_vendor, eth_flags;
#ifdef INCLUDE_WD
static unsigned char eth_laar;
#endif
static unsigned short eth_nic_base, eth_asic_base;
static unsigned char eth_memsize, eth_rx_start, eth_tx_start;
static Address eth_bmem, eth_rmem;
static unsigned char eth_drain_receiver;
#ifdef INCLUDE_WD
static struct wd_board {
const char *name;
char id;
char flags;
char memsize;
} wd_boards[] = {
{"WD8003S", TYPE_WD8003S, 0, MEM_8192},
{"WD8003E", TYPE_WD8003E, 0, MEM_8192},
{"WD8013EBT", TYPE_WD8013EBT, FLAG_16BIT, MEM_16384},
{"WD8003W", TYPE_WD8003W, 0, MEM_8192},
{"WD8003EB", TYPE_WD8003EB, 0, MEM_8192},
{"WD8013W", TYPE_WD8013W, FLAG_16BIT, MEM_16384},
{"WD8003EP/WD8013EP",
TYPE_WD8013EP, 0, MEM_8192},
{"WD8013WC", TYPE_WD8013WC, FLAG_16BIT, MEM_16384},
{"WD8013EPC", TYPE_WD8013EPC, FLAG_16BIT, MEM_16384},
{"SMC8216T", TYPE_SMC8216T, FLAG_16BIT | FLAG_790, MEM_16384},
{"SMC8216C", TYPE_SMC8216C, FLAG_16BIT | FLAG_790, MEM_16384},
{"SMC8416T", TYPE_SMC8416T, FLAG_16BIT | FLAG_790, MEM_8192},
{"SMC8416C/BT", TYPE_SMC8416C, FLAG_16BIT | FLAG_790, MEM_8192},
{"SMC8013EBP", TYPE_SMC8013EBP,FLAG_16BIT, MEM_16384},
{NULL, 0, 0, 0}
};
#endif
#ifdef INCLUDE_3C503
static unsigned char t503_output; /* AUI or internal xcvr (Thinnet) */
#endif
#if defined(INCLUDE_WD)
#define ASIC_PIO WD_IAR
#define eth_probe wd_probe
#if defined(INCLUDE_3C503) || defined(INCLUDE_NE) || defined(INCLUDE_NS8390)
Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390
#endif
#endif
#if defined(INCLUDE_3C503)
#define eth_probe t503_probe
#if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || defined(INCLUDE_WD)
Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390
#endif
#endif
#if defined(INCLUDE_NE)
#define eth_probe ne_probe
#if defined(INCLUDE_NS8390) || defined(INCLUDE_3C503) || defined(INCLUDE_WD)
Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390
#endif
#endif
#if defined(INCLUDE_NS8390)
#define eth_probe nepci_probe
#if defined(INCLUDE_NE) || defined(INCLUDE_3C503) || defined(INCLUDE_WD)
Error you must only define one of INCLUDE_WD, INCLUDE_3C503, INCLUDE_NE, INCLUDE_NS8390
#endif
#endif
#if defined(INCLUDE_3C503)
#define ASIC_PIO _3COM_RFMSB
#else
#if defined(INCLUDE_NE) || defined(INCLUDE_NS8390)
#define ASIC_PIO NE_DATA
#endif
#endif
#if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO))
/**************************************************************************
ETH_PIO_READ - Read a frame via Programmed I/O
**************************************************************************/
static void eth_pio_read(unsigned int src, unsigned char *dst, unsigned int cnt)
{
#ifdef INCLUDE_WD
outb(src & 0xff, eth_asic_base + WD_GP2);
outb(src >> 8, eth_asic_base + WD_GP2);
#else
outb(D8390_COMMAND_RD2 |
D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
outb(cnt, eth_nic_base + D8390_P0_RBCR0);
outb(cnt>>8, eth_nic_base + D8390_P0_RBCR1);
outb(src, eth_nic_base + D8390_P0_RSAR0);
outb(src>>8, eth_nic_base + D8390_P0_RSAR1);
outb(D8390_COMMAND_RD0 |
D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
#ifdef INCLUDE_3C503
outb(src & 0xff, eth_asic_base + _3COM_DALSB);
outb(src >> 8, eth_asic_base + _3COM_DAMSB);
outb(t503_output | _3COM_CR_START, eth_asic_base + _3COM_CR);
#endif
#endif
if (eth_flags & FLAG_16BIT)
cnt = (cnt + 1) >> 1;
while(cnt--) {
#ifdef INCLUDE_3C503
while((inb(eth_asic_base + _3COM_STREG) & _3COM_STREG_DPRDY) == 0)
;
#endif
if (eth_flags & FLAG_16BIT) {
*((unsigned short *)dst) = inw(eth_asic_base + ASIC_PIO);
dst += 2;
}
else
*(dst++) = inb(eth_asic_base + ASIC_PIO);
}
#ifdef INCLUDE_3C503
outb(t503_output, eth_asic_base + _3COM_CR);
#endif
}
/**************************************************************************
ETH_PIO_WRITE - Write a frame via Programmed I/O
**************************************************************************/
static void eth_pio_write(const unsigned char *src, unsigned int dst, unsigned int cnt)
{
#ifdef COMPEX_RL2000_FIX
unsigned int x;
#endif /* COMPEX_RL2000_FIX */
#ifdef INCLUDE_WD
outb(dst & 0xff, eth_asic_base + WD_GP2);
outb(dst >> 8, eth_asic_base + WD_GP2);
#else
outb(D8390_COMMAND_RD2 |
D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
outb(D8390_ISR_RDC, eth_nic_base + D8390_P0_ISR);
outb(cnt, eth_nic_base + D8390_P0_RBCR0);
outb(cnt>>8, eth_nic_base + D8390_P0_RBCR1);
outb(dst, eth_nic_base + D8390_P0_RSAR0);
outb(dst>>8, eth_nic_base + D8390_P0_RSAR1);
outb(D8390_COMMAND_RD1 |
D8390_COMMAND_STA, eth_nic_base + D8390_P0_COMMAND);
#ifdef INCLUDE_3C503
outb(dst & 0xff, eth_asic_base + _3COM_DALSB);
outb(dst >> 8, eth_asic_base + _3COM_DAMSB);
outb(t503_output | _3COM_CR_DDIR | _3COM_CR_START, eth_asic_base + _3COM_CR);
#endif
#endif
if (eth_flags & FLAG_16BIT)
cnt = (cnt + 1) >> 1;
while(cnt--)
{
#ifdef INCLUDE_3C503
while((inb(eth_asic_base + _3COM_STREG) & _3COM_STREG_DPRDY) == 0)
;
#endif
if (eth_flags & FLAG_16BIT) {
outw(*((unsigned short *)src), eth_asic_base + ASIC_PIO);
src += 2;
}
else
outb(*(src++), eth_asic_base + ASIC_PIO);
}
#ifdef INCLUDE_3C503
outb(t503_output, eth_asic_base + _3COM_CR);
#else
#ifdef COMPEX_RL2000_FIX
for (x = 0;
x < COMPEX_RL2000_TRIES &&
(inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC)
!= D8390_ISR_RDC;
++x);
if (x >= COMPEX_RL2000_TRIES)
printf("Warning: Compex RL2000 aborted wait!\n");
#endif /* COMPEX_RL2000_FIX */
#ifndef INCLUDE_WD
while((inb(eth_nic_base + D8390_P0_ISR) & D8390_ISR_RDC)
!= D8390_ISR_RDC);
#endif
#endif
}
#else
/**************************************************************************
ETH_PIO_READ - Dummy routine when NE2000 not compiled in
**************************************************************************/
static void eth_pio_read(unsigned int src __unused, unsigned char *dst __unused, unsigned int cnt __unused) {}
#endif
/**************************************************************************
enable_multycast - Enable Multicast
**************************************************************************/
static void enable_multicast(unsigned short eth_nic_base)
{
unsigned char mcfilter[8];
int i;
memset(mcfilter, 0xFF, 8);
outb(4, eth_nic_base+D8390_P0_RCR);
outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS1, eth_nic_base + D8390_P0_COMMAND);
for(i=0;i<8;i++)
{
outb(mcfilter[i], eth_nic_base + 8 + i);
if(inb(eth_nic_base + 8 + i)!=mcfilter[i])
printf("Error SMC 83C690 Multicast filter read/write mishap %d\n",i);
}
outb(D8390_COMMAND_RD2 + D8390_COMMAND_PS0, eth_nic_base + D8390_P0_COMMAND);
outb(4 | 0x08, eth_nic_base+D8390_P0_RCR);
}
/**************************************************************************
NS8390_RESET - Reset adapter
**************************************************************************/
static void ns8390_reset(struct nic *nic)
{
int i;
eth_drain_receiver = 0;
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 |
D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
if (eth_flags & FLAG_16BIT)
outb(0x49, eth_nic_base+D8390_P0_DCR);
else
outb(0x48, eth_nic_base+D8390_P0_DCR);
outb(0, eth_nic_base+D8390_P0_RBCR0);
outb(0, eth_nic_base+D8390_P0_RBCR1);
outb(0x20, eth_nic_base+D8390_P0_RCR); /* monitor mode */
outb(2, eth_nic_base+D8390_P0_TCR);
outb(eth_tx_start, eth_nic_base+D8390_P0_TPSR);
outb(eth_rx_start, eth_nic_base+D8390_P0_PSTART);
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790) {
#ifdef WD_790_PIO
outb(0x10, eth_asic_base + 0x06); /* disable interrupts, enable PIO */
outb(0x01, eth_nic_base + 0x09); /* enable ring read auto-wrap */
#else
outb(0, eth_nic_base + 0x09);
#endif
}
#endif
outb(eth_memsize, eth_nic_base+D8390_P0_PSTOP);
outb(eth_memsize - 1, eth_nic_base+D8390_P0_BOUND);
outb(0xFF, eth_nic_base+D8390_P0_ISR);
outb(0, eth_nic_base+D8390_P0_IMR);
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS1 |
D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS1 |
D8390_COMMAND_RD2 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
for (i=0; i<ETH_ALEN; i++)
outb(nic->node_addr[i], eth_nic_base+D8390_P1_PAR0+i);
for (i=0; i<ETH_ALEN; i++)
outb(0xFF, eth_nic_base+D8390_P1_MAR0+i);
outb(eth_rx_start, eth_nic_base+D8390_P1_CURR);
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
outb(0xFF, eth_nic_base+D8390_P0_ISR);
outb(0, eth_nic_base+D8390_P0_TCR); /* transmitter on */
outb(4, eth_nic_base+D8390_P0_RCR); /* allow rx broadcast frames */
enable_multicast(eth_nic_base);
#ifdef INCLUDE_3C503
/*
* No way to tell whether or not we're supposed to use
* the 3Com's transceiver unless the user tells us.
* 'flags' should have some compile time default value
* which can be changed from the command menu.
*/
t503_output = (nic->flags) ? 0 : _3COM_CR_XSEL;
outb(t503_output, eth_asic_base + _3COM_CR);
#endif
}
static int ns8390_poll(struct nic *nic, int retrieve);
#ifndef INCLUDE_3C503
/**************************************************************************
ETH_RX_OVERRUN - Bring adapter back to work after an RX overrun
**************************************************************************/
static void eth_rx_overrun(struct nic *nic)
{
int start_time;
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 | D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 |
D8390_COMMAND_STP, eth_nic_base+D8390_P0_COMMAND);
/* wait for at least 1.6ms - we wait one timer tick */
start_time = currticks();
while (currticks() - start_time <= 1)
/* Nothing */;
outb(0, eth_nic_base+D8390_P0_RBCR0); /* reset byte counter */
outb(0, eth_nic_base+D8390_P0_RBCR1);
/*
* Linux driver checks for interrupted TX here. This is not necessary,
* because the transmit routine waits until the frame is sent.
*/
/* enter loopback mode and restart NIC */
outb(2, eth_nic_base+D8390_P0_TCR);
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 | D8390_COMMAND_RD2 |
D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
/* clear the RX ring, acknowledge overrun interrupt */
eth_drain_receiver = 1;
while (ns8390_poll(nic, 1))
/* Nothing */;
eth_drain_receiver = 0;
outb(D8390_ISR_OVW, eth_nic_base+D8390_P0_ISR);
/* leave loopback mode - no packets to be resent (see Linux driver) */
outb(0, eth_nic_base+D8390_P0_TCR);
}
#endif /* INCLUDE_3C503 */
/**************************************************************************
NS8390_TRANSMIT - Transmit a frame
**************************************************************************/
static void ns8390_transmit(
struct nic *nic,
const char *d, /* Destination */
unsigned int t, /* Type */
unsigned int s, /* size */
const char *p) /* Packet */
{
#if defined(INCLUDE_3C503) || (defined(INCLUDE_WD) && ! defined(WD_790_PIO))
Address eth_vmem = bus_to_virt(eth_bmem);
#endif
#ifdef INCLUDE_3C503
if (!(eth_flags & FLAG_PIO)) {
memcpy((char *)eth_vmem, d, ETH_ALEN); /* dst */
memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
*((char *)eth_vmem+12) = t>>8; /* type */
*((char *)eth_vmem+13) = t;
memcpy((char *)eth_vmem+ETH_HLEN, p, s);
s += ETH_HLEN;
while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0;
}
#endif
#ifdef INCLUDE_WD
if (eth_flags & FLAG_16BIT) {
outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
inb(0x84);
}
#ifndef WD_790_PIO
/* Memory interface */
if (eth_flags & FLAG_790) {
outb(WD_MSR_MENB, eth_asic_base + WD_MSR);
inb(0x84);
}
inb(0x84);
memcpy((char *)eth_vmem, d, ETH_ALEN); /* dst */
memcpy((char *)eth_vmem+ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
*((char *)eth_vmem+12) = t>>8; /* type */
*((char *)eth_vmem+13) = t;
memcpy((char *)eth_vmem+ETH_HLEN, p, s);
s += ETH_HLEN;
while (s < ETH_ZLEN) *((char *)eth_vmem+(s++)) = 0;
if (eth_flags & FLAG_790) {
outb(0, eth_asic_base + WD_MSR);
inb(0x84);
}
#else
inb(0x84);
#endif
#endif
#if defined(INCLUDE_3C503)
if (eth_flags & FLAG_PIO)
#endif
#if defined(INCLUDE_NE) || defined(INCLUDE_NS8390) || (defined(INCLUDE_3C503) && !defined(T503_SHMEM)) || (defined(INCLUDE_WD) && defined(WD_790_PIO))
{
/* Programmed I/O */
unsigned short type;
type = (t >> 8) | (t << 8);
eth_pio_write(d, eth_tx_start<<8, ETH_ALEN);
eth_pio_write(nic->node_addr, (eth_tx_start<<8)+ETH_ALEN, ETH_ALEN);
/* bcc generates worse code without (const+const) below */
eth_pio_write((unsigned char *)&type, (eth_tx_start<<8)+(ETH_ALEN+ETH_ALEN), 2);
eth_pio_write(p, (eth_tx_start<<8)+ETH_HLEN, s);
s += ETH_HLEN;
if (s < ETH_ZLEN) s = ETH_ZLEN;
}
#endif
#if defined(INCLUDE_3C503)
#endif
#ifdef INCLUDE_WD
if (eth_flags & FLAG_16BIT) {
outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
inb(0x84);
}
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_RD2 | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
outb(eth_tx_start, eth_nic_base+D8390_P0_TPSR);
outb(s, eth_nic_base+D8390_P0_TBCR0);
outb(s>>8, eth_nic_base+D8390_P0_TBCR1);
#ifdef INCLUDE_WD
if (eth_flags & FLAG_790)
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_TXP | D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
else
#endif
outb(D8390_COMMAND_PS0 |
D8390_COMMAND_TXP | D8390_COMMAND_RD2 |
D8390_COMMAND_STA, eth_nic_base+D8390_P0_COMMAND);
}
/**************************************************************************
NS8390_POLL - Wait for a frame
**************************************************************************/
static int ns8390_poll(struct nic *nic, int retrieve)
{
int ret = 0;
unsigned char rstat, curr, next;
unsigned short len, frag;
unsigned short pktoff;
unsigned char *p;
struct ringbuffer pkthdr;
#ifndef INCLUDE_3C503
/* avoid infinite recursion: see eth_rx_overrun() */
if (!eth_drain_receiver && (inb(eth_nic_base+D8390_P0_ISR) & D8390_ISR_OVW)) {
eth_rx_overrun(nic);
return(0);
}
#endif /* INCLUDE_3C503 */
rstat = inb(eth_nic_base+D8390_P0_RSR);
if (!(rstat & D8390_RSTAT_PRX)) return(0);
next = inb(eth_nic_base+D8390_P0_BOUND)+1;
if (next >= eth_memsize) next = eth_rx_start;
outb(D8390_COMMAND_PS1, eth_nic_base+D8390_P0_COMMAND);
curr = inb(eth_nic_base+D8390_P1_CURR);
outb(D8390_COMMAND_PS0, eth_nic_base+D8390_P0_COMMAND);
if (curr >= eth_memsize) curr=eth_rx_start;
if (curr == next) return(0);
if ( ! retrieve ) return 1;
#ifdef INCLUDE_WD
if (eth_flags & FLAG_16BIT) {
outb(eth_laar | WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
inb(0x84);
}
#ifndef WD_790_PIO
if (eth_flags & FLAG_790) {
outb(WD_MSR_MENB, eth_asic_base + WD_MSR);
inb(0x84);
}
#endif
inb(0x84);
#endif
pktoff = next << 8;
if (eth_flags & FLAG_PIO)
eth_pio_read(pktoff, (char *)&pkthdr, 4);
else
memcpy(&pkthdr, bus_to_virt(eth_rmem + pktoff), 4);
pktoff += sizeof(pkthdr);
/* incoming length includes FCS so must sub 4 */
len = pkthdr.len - 4;
if ((pkthdr.status & D8390_RSTAT_PRX) == 0 || len < ETH_ZLEN
|| len > ETH_FRAME_LEN) {
printf("Bogus packet, ignoring\n");
return (0);
}
else {
p = nic->packet;
nic->packetlen = len; /* available to caller */
frag = (eth_memsize << 8) - pktoff;
if (len > frag) { /* We have a wrap-around */
/* read first part */
if (eth_flags & FLAG_PIO)
eth_pio_read(pktoff, p, frag);
else
memcpy(p, bus_to_virt(eth_rmem + pktoff), frag);
pktoff = eth_rx_start << 8;
p += frag;
len -= frag;
}
/* read second part */
if (eth_flags & FLAG_PIO)
eth_pio_read(pktoff, p, len);
else
memcpy(p, bus_to_virt(eth_rmem + pktoff), len);
ret = 1;
}
#ifdef INCLUDE_WD
#ifndef WD_790_PIO
if (eth_flags & FLAG_790) {
outb(0, eth_asic_base + WD_MSR);
inb(0x84);
}
#endif
if (eth_flags & FLAG_16BIT) {
outb(eth_laar & ~WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
inb(0x84);
}
inb(0x84);
#endif
next = pkthdr.next; /* frame number of next packet */
if (next == eth_rx_start)
next = eth_memsize;
outb(next-1, eth_nic_base+D8390_P0_BOUND);
return(ret);
}
/**************************************************************************
NS8390_DISABLE - Turn off adapter
**************************************************************************/
static void ns8390_disable(struct dev *dev)
{
struct nic *nic = (struct nic *)dev;
/* reset and disable merge */
ns8390_reset(nic);
}
/**************************************************************************
NS8390_IRQ - Enable, Disable, or Force interrupts
**************************************************************************/
static void ns8390_irq(struct nic *nic __unused, irq_action_t action __unused)
{
switch ( action ) {
case DISABLE :
break;
case ENABLE :
break;
case FORCE :
break;
}
}
/**************************************************************************
ETH_PROBE - Look for an adapter
**************************************************************************/
#ifdef INCLUDE_NS8390
static int eth_probe (struct dev *dev, struct pci_device *pci)
#else
static int eth_probe (struct dev *dev, unsigned short *probe_addrs __unused)
#endif
{
struct nic *nic = (struct nic *)dev;
int i;
#ifdef INCLUDE_NS8390
unsigned short pci_probe_addrs[] = { pci->ioaddr, 0 };
unsigned short *probe_addrs = pci_probe_addrs;
#endif
eth_vendor = VENDOR_NONE;
eth_drain_receiver = 0;
nic->irqno = 0;
#ifdef INCLUDE_WD
{
/******************************************************************
Search for WD/SMC cards
******************************************************************/
struct wd_board *brd;
unsigned short chksum;
unsigned char c;
for (eth_asic_base = WD_LOW_BASE; eth_asic_base <= WD_HIGH_BASE;
eth_asic_base += 0x20) {
chksum = 0;
for (i=8; i<16; i++)
chksum += inb(eth_asic_base+i);
/* Extra checks to avoid soundcard */
if ((chksum & 0xFF) == 0xFF &&
inb(eth_asic_base+8) != 0xFF &&
inb(eth_asic_base+9) != 0xFF)
break;
}
if (eth_asic_base > WD_HIGH_BASE)
return (0);
/* We've found a board */
eth_vendor = VENDOR_WD;
eth_nic_base = eth_asic_base + WD_NIC_ADDR;
nic->ioaddr = eth_nic_base;
c = inb(eth_asic_base+WD_BID); /* Get board id */
for (brd = wd_boards; brd->name; brd++)
if (brd->id == c) break;
if (!brd->name) {
printf("Unknown WD/SMC NIC type %hhX\n", c);
return (0); /* Unknown type */
}
eth_flags = brd->flags;
eth_memsize = brd->memsize;
eth_tx_start = 0;
eth_rx_start = D8390_TXBUF_SIZE;
if ((c == TYPE_WD8013EP) &&
(inb(eth_asic_base + WD_ICR) & WD_ICR_16BIT)) {
eth_flags = FLAG_16BIT;
eth_memsize = MEM_16384;
}
if ((c & WD_SOFTCONFIG) && (!(eth_flags & FLAG_790))) {
eth_bmem = (0x80000 |
((inb(eth_asic_base + WD_MSR) & 0x3F) << 13));
} else
eth_bmem = WD_DEFAULT_MEM;
if (brd->id == TYPE_SMC8216T || brd->id == TYPE_SMC8216C) {
/* from Linux driver, 8416BT detects as 8216 sometimes */
unsigned int addr = inb(eth_asic_base + 0xb);
if (((addr >> 4) & 3) == 0) {
brd += 2;
eth_memsize = brd->memsize;
}
}
outb(0x80, eth_asic_base + WD_MSR); /* Reset */
for (i=0; i<ETH_ALEN; i++) {
nic->node_addr[i] = inb(i+eth_asic_base+WD_LAR);
}
printf("\n%s base %#hx", brd->name, eth_asic_base);
if (eth_flags & FLAG_790) {
#ifdef WD_790_PIO
printf(", PIO mode, addr %!\n", nic->node_addr);
eth_bmem = 0;
eth_flags |= FLAG_PIO; /* force PIO mode */
outb(0, eth_asic_base+WD_MSR);
#else
printf(", memory %#x, addr %!\n", eth_bmem, nic->node_addr);
outb(WD_MSR_MENB, eth_asic_base+WD_MSR);
outb((inb(eth_asic_base+0x04) |
0x80), eth_asic_base+0x04);
outb(((unsigned)(eth_bmem >> 13) & 0x0F) |
((unsigned)(eth_bmem >> 11) & 0x40) |
(inb(eth_asic_base+0x0B) & 0xB0), eth_asic_base+0x0B);
outb((inb(eth_asic_base+0x04) &
~0x80), eth_asic_base+0x04);
#endif
} else {
printf(", memory %#x, addr %!\n", eth_bmem, nic->node_addr);
outb(((unsigned)(eth_bmem >> 13) & 0x3F) | 0x40, eth_asic_base+WD_MSR);
}
if (eth_flags & FLAG_16BIT) {
if (eth_flags & FLAG_790) {
eth_laar = inb(eth_asic_base + WD_LAAR);
outb(WD_LAAR_M16EN, eth_asic_base + WD_LAAR);
} else {
outb((eth_laar =
WD_LAAR_L16EN | 1), eth_asic_base + WD_LAAR);
/*
The previous line used to be
WD_LAAR_M16EN | WD_LAAR_L16EN | 1));
jluke@deakin.edu.au reported that removing WD_LAAR_M16EN made
it work for WD8013s. This seems to work for my 8013 boards. I
don't know what is really happening. I wish I had data sheets
or more time to decode the Linux driver. - Ken
*/
}
inb(0x84);
}
}
#endif
#ifdef INCLUDE_3C503
#ifdef T503_AUI
nic->flags = 1; /* aui */
#else
nic->flags = 0; /* no aui */
#endif
/******************************************************************
Search for 3Com 3c503 if no WD/SMC cards
******************************************************************/
if (eth_vendor == VENDOR_NONE) {
int idx;
int iobase_reg, membase_reg;
static unsigned short base[] = {
0x300, 0x310, 0x330, 0x350,
0x250, 0x280, 0x2A0, 0x2E0, 0 };
/* Loop through possible addresses checking each one */
for (idx = 0; (eth_nic_base = base[idx]) != 0; ++idx) {
eth_asic_base = eth_nic_base + _3COM_ASIC_OFFSET;
/*
* Note that we use the same settings for both 8 and 16 bit cards:
* both have an 8K bank of memory at page 1 while only the 16 bit
* cards have a bank at page 0.
*/
eth_memsize = MEM_16384;
eth_tx_start = 32;
eth_rx_start = 32 + D8390_TXBUF_SIZE;
/* Check our base address. iobase and membase should */
/* both have a maximum of 1 bit set or be 0. */
iobase_reg = inb(eth_asic_base + _3COM_BCFR);
membase_reg = inb(eth_asic_base + _3COM_PCFR);
if ((iobase_reg & (iobase_reg - 1)) ||
(membase_reg & (membase_reg - 1)))
continue; /* nope */
/* Now get the shared memory address */
eth_flags = 0;
switch (membase_reg) {
case _3COM_PCFR_DC000:
eth_bmem = 0xdc000;
break;
case _3COM_PCFR_D8000:
eth_bmem = 0xd8000;
break;
case _3COM_PCFR_CC000:
eth_bmem = 0xcc000;
break;
case _3COM_PCFR_C8000:
eth_bmem = 0xc8000;
break;
case _3COM_PCFR_PIO:
eth_flags |= FLAG_PIO;
eth_bmem = 0;
break;
default:
continue; /* nope */
}
break;
}
if (base[idx] == 0) /* not found */
return (0);
#ifndef T503_SHMEM
eth_flags |= FLAG_PIO; /* force PIO mode */
eth_bmem = 0;
#endif
eth_vendor = VENDOR_3COM;
/* Need this to make ns8390_poll() happy. */
eth_rmem = eth_bmem - 0x2000;
/* Reset NIC and ASIC */
outb(_3COM_CR_RST | _3COM_CR_XSEL, eth_asic_base + _3COM_CR );
outb(_3COM_CR_XSEL, eth_asic_base + _3COM_CR );
/* Get our ethernet address */
outb(_3COM_CR_EALO | _3COM_CR_XSEL, eth_asic_base + _3COM_CR);
nic->ioaddr = eth_nic_base;
printf("\n3Com 3c503 base %#hx, ", eth_nic_base);
if (eth_flags & FLAG_PIO)
printf("PIO mode");
else
printf("memory %#x", eth_bmem);
for (i=0; i<ETH_ALEN; i++) {
nic->node_addr[i] = inb(eth_nic_base+i);
}
printf(", %s, addr %!\n", nic->flags ? "AUI" : "internal xcvr",
nic->node_addr);
outb(_3COM_CR_XSEL, eth_asic_base + _3COM_CR);
/*
* Initialize GA configuration register. Set bank and enable shared
* mem. We always use bank 1. Disable interrupts.
*/
outb(_3COM_GACFR_RSEL |
_3COM_GACFR_MBS0 | _3COM_GACFR_TCM | _3COM_GACFR_NIM, eth_asic_base + _3COM_GACFR);
outb(0xff, eth_asic_base + _3COM_VPTR2);
outb(0xff, eth_asic_base + _3COM_VPTR1);
outb(0x00, eth_asic_base + _3COM_VPTR0);
/*
* Clear memory and verify that it worked (we use only 8K)
*/
if (!(eth_flags & FLAG_PIO)) {
memset(bus_to_virt(eth_bmem), 0, 0x2000);
for(i = 0; i < 0x2000; ++i)
if (*((char *)(bus_to_virt(eth_bmem+i)))) {
printf ("Failed to clear 3c503 shared mem.\n");
return (0);
}
}
/*
* Initialize GA page/start/stop registers.
*/
outb(eth_tx_start, eth_asic_base + _3COM_PSTR);
outb(eth_memsize, eth_asic_base + _3COM_PSPR);
}
#endif
#if defined(INCLUDE_NE) || defined(INCLUDE_NS8390)
{
/******************************************************************
Search for NE1000/2000 if no WD/SMC or 3com cards
******************************************************************/
unsigned char c;
if (eth_vendor == VENDOR_NONE) {
char romdata[16], testbuf[32];
int idx;
static char test[] = "NE*000 memory";
static unsigned short base[] = {
#ifdef NE_SCAN
NE_SCAN,
#endif
0 };
/* if no addresses supplied, fall back on defaults */
if (probe_addrs == 0 || probe_addrs[0] == 0)
probe_addrs = base;
eth_bmem = 0; /* No shared memory */
for (idx = 0; (eth_nic_base = probe_addrs[idx]) != 0; ++idx) {
eth_flags = FLAG_PIO;
eth_asic_base = eth_nic_base + NE_ASIC_OFFSET;
eth_memsize = MEM_16384;
eth_tx_start = 32;
eth_rx_start = 32 + D8390_TXBUF_SIZE;
c = inb(eth_asic_base + NE_RESET);
outb(c, eth_asic_base + NE_RESET);
inb(0x84);
outb(D8390_COMMAND_STP |
D8390_COMMAND_RD2, eth_nic_base + D8390_P0_COMMAND);
outb(D8390_RCR_MON, eth_nic_base + D8390_P0_RCR);
outb(D8390_DCR_FT1 | D8390_DCR_LS, eth_nic_base + D8390_P0_DCR);
outb(MEM_8192, eth_nic_base + D8390_P0_PSTART);
outb(MEM_16384, eth_nic_base + D8390_P0_PSTOP);
#ifdef NS8390_FORCE_16BIT
eth_flags |= FLAG_16BIT; /* force 16-bit mode */
#endif
eth_pio_write(test, 8192, sizeof(test));
eth_pio_read(8192, testbuf, sizeof(test));
if (!memcmp(test, testbuf, sizeof(test)))
break;
eth_flags |= FLAG_16BIT;
eth_memsize = MEM_32768;
eth_tx_start = 64;
eth_rx_start = 64 + D8390_TXBUF_SIZE;
outb(D8390_DCR_WTS |
D8390_DCR_FT1 | D8390_DCR_LS, eth_nic_base + D8390_P0_DCR);
outb(MEM_16384, eth_nic_base + D8390_P0_PSTART);
outb(MEM_32768, eth_nic_base + D8390_P0_PSTOP);
eth_pio_write(test, 16384, sizeof(test));
eth_pio_read(16384, testbuf, sizeof(test));
if (!memcmp(testbuf, test, sizeof(test)))
break;
}
if (eth_nic_base == 0)
return (0);
if (eth_nic_base > ISA_MAX_ADDR) /* PCI probably */
eth_flags |= FLAG_16BIT;
eth_vendor = VENDOR_NOVELL;
eth_pio_read(0, romdata, sizeof(romdata));
for (i=0; i<ETH_ALEN; i++) {
nic->node_addr[i] = romdata[i + ((eth_flags & FLAG_16BIT) ? i : 0)];
}
nic->ioaddr = eth_nic_base;
printf("\nNE%c000 base %#hx, addr %!\n",
(eth_flags & FLAG_16BIT) ? '2' : '1', eth_nic_base,
nic->node_addr);
}
}
#endif
if (eth_vendor == VENDOR_NONE)
return(0);
if (eth_vendor != VENDOR_3COM)
eth_rmem = eth_bmem;
ns8390_reset(nic);
dev->disable = ns8390_disable;
nic->poll = ns8390_poll;
nic->transmit = ns8390_transmit;
nic->irq = ns8390_irq;
/* Based on PnP ISA map */
#ifdef INCLUDE_WD
dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
dev->devid.device_id = htons(0x812a);
#endif
#ifdef INCLUDE_3C503
dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
dev->devid.device_id = htons(0x80f3);
#endif
#ifdef INCLUDE_NE
dev->devid.vendor_id = htons(GENERIC_ISAPNP_VENDOR);
dev->devid.device_id = htons(0x80d6);
#endif
return 1;
}
#ifdef INCLUDE_WD
static struct isa_driver wd_driver __isa_driver = {
.type = NIC_DRIVER,
.name = "WD",
.probe = wd_probe,
.ioaddrs = 0,
};
#endif
#ifdef INCLUDE_3C503
static struct isa_driver t503_driver __isa_driver = {
.type = NIC_DRIVER,
.name = "3C503",
.probe = t503_probe,
.ioaddrs = 0,
};
#endif
#ifdef INCLUDE_NE
static struct isa_driver ne_driver __isa_driver = {
.type = NIC_DRIVER,
.name = "NE*000",
.probe = ne_probe,
.ioaddrs = 0,
};
#endif
#ifdef INCLUDE_NS8390
static struct pci_id nepci_nics[] = {
/* A few NE2000 PCI clones, list not exhaustive */
PCI_ROM(0x10ec, 0x8029, "rtl8029", "Realtek 8029"),
PCI_ROM(0x1186, 0x0300, "dlink-528", "D-Link DE-528"),
PCI_ROM(0x1050, 0x0940, "winbond940", "Winbond NE2000-PCI"), /* Winbond 86C940 / 89C940 */
PCI_ROM(0x1050, 0x5a5a, "winbond940f", "Winbond W89c940F"), /* Winbond 89C940F */
PCI_ROM(0x11f6, 0x1401, "compexrl2000", "Compex ReadyLink 2000"),
PCI_ROM(0x8e2e, 0x3000, "ktiet32p2", "KTI ET32P2"),
PCI_ROM(0x4a14, 0x5000, "nv5000sc", "NetVin NV5000SC"),
PCI_ROM(0x12c3, 0x0058, "holtek80232", "Holtek HT80232"),
PCI_ROM(0x12c3, 0x5598, "holtek80229", "Holtek HT80229"),
PCI_ROM(0x10bd, 0x0e34, "surecom-ne34", "Surecom NE34"),
PCI_ROM(0x1106, 0x0926, "via86c926", "Via 86c926"),
};
static struct pci_driver nepci_driver __pci_driver = {
.type = NIC_DRIVER,
.name = "NE2000/PCI",
.probe = nepci_probe,
.ids = nepci_nics,
.id_count = sizeof(nepci_nics)/sizeof(nepci_nics[0]),
.class = 0,
};
#endif /* INCLUDE_NS8390 */
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
Reference in New Issue View Git Blame Copy Permalink