/** @file * * PXE UDP API * */ #include "pxe.h" #include "io.h" #include "string.h" /* * Copyright (C) 2004 Michael Brown . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /** * UDP OPEN * * @v udp_open Pointer to a struct s_PXENV_UDP_OPEN * @v s_PXENV_UDP_OPEN::src_ip IP address of this station, or 0.0.0.0 * @ret #PXENV_EXIT_SUCCESS Always * @ret s_PXENV_UDP_OPEN::Status PXE status code * @err #PXENV_STATUS_UNDI_INVALID_STATE NIC could not be initialised * * Prepares the PXE stack for communication using pxenv_udp_write() * and pxenv_udp_read(). The IP address supplied in * s_PXENV_UDP_OPEN::src_ip will be recorded and used as the local * station's IP address for all further communication, including * communication by means other than pxenv_udp_write() and * pxenv_udp_read(). (If s_PXENV_UDP_OPEN::src_ip is 0.0.0.0, the * local station's IP address will remain unchanged.) * * You can only have one open UDP connection at a time. You cannot * have a UDP connection open at the same time as a TFTP connection. * (This is not strictly true for Etherboot; see the relevant @ref * pxe_note_udp "implementation note" for more details.) * * On x86, you must set the s_PXE::StatusCallout field to a nonzero * value before calling this function in protected mode. You cannot * call this function with a 32-bit stack segment. (See the relevant * @ref pxe_x86_pmode16 "implementation note" for more details.) * * @note The PXE specification does not make it clear whether the IP * address supplied in s_PXENV_UDP_OPEN::src_ip should be used only * for this UDP connection, or retained for all future communication. * The latter seems more consistent with typical PXE stack behaviour. * */ PXENV_EXIT_t pxenv_udp_open ( struct s_PXENV_UDP_OPEN *udp_open ) { DBG ( "PXENV_UDP_OPEN" ); ENSURE_READY ( udp_open ); if ( udp_open->src_ip && udp_open->src_ip != arptable[ARP_CLIENT].ipaddr.s_addr ) { /* Overwrite our IP address */ DBG ( " with new IP %@", udp_open->src_ip ); arptable[ARP_CLIENT].ipaddr.s_addr = udp_open->src_ip; } udp_open->Status = PXENV_STATUS_SUCCESS; return PXENV_EXIT_SUCCESS; } /** * UDP CLOSE * * @v udp_close Pointer to a struct s_PXENV_UDP_CLOSE * @ret #PXENV_EXIT_SUCCESS Always * @ret s_PXENV_UDP_CLOSE::Status PXE status code * @err None - * * Closes a UDP "connection" opened with pxenv_udp_open(). * * You can only have one open UDP connection at a time. You cannot * have a UDP connection open at the same time as a TFTP connection. * You cannot use pxenv_udp_close() to close a TFTP connection; use * pxenv_tftp_close() instead. (This is not strictly true for * Etherboot; see the relevant @ref pxe_note_udp "implementation note" * for more details.) * * On x86, you must set the s_PXE::StatusCallout field to a nonzero * value before calling this function in protected mode. You cannot * call this function with a 32-bit stack segment. (See the relevant * @ref pxe_x86_pmode16 "implementation note" for more details.) * */ PXENV_EXIT_t pxenv_udp_close ( struct s_PXENV_UDP_CLOSE *udp_close __unused ) { DBG ( "PXENV_UDP_CLOSE" ); udp_close->Status = PXENV_STATUS_SUCCESS; return PXENV_EXIT_SUCCESS; } /** * UDP WRITE * * @v udp_write Pointer to a struct s_PXENV_UDP_WRITE * @v s_PXENV_UDP_WRITE::ip Destination IP address * @v s_PXENV_UDP_WRITE::gw Gateway IP address, or 0.0.0.0 * @v s_PXENV_UDP_WRITE::src_port Source UDP port, or 0 * @v s_PXENV_UDP_WRITE::dst_port Destination UDP port * @v s_PXENV_UDP_WRITE::buffer_size Length of the UDP payload * @v s_PXENV_UDP_WRITE::buffer Address of the UDP payload * @ret #PXENV_EXIT_SUCCESS Packet was transmitted successfully * @ret #PXENV_EXIT_FAILURE Packet could not be transmitted * @ret s_PXENV_UDP_WRITE::Status PXE status code * @err #PXENV_STATUS_UNDI_INVALID_STATE NIC could not be initialised * @err #PXENV_STATUS_OUT_OF_RESOURCES Packet was too large to transmit * @err other Any error from pxenv_undi_transmit() * * Transmits a single UDP packet. A valid IP and UDP header will be * prepended to the payload in s_PXENV_UDP_WRITE::buffer; the buffer * should not contain precomputed IP and UDP headers, nor should it * contain space allocated for these headers. The first byte of the * buffer will be transmitted as the first byte following the UDP * header. * * If s_PXENV_UDP_WRITE::gw is 0.0.0.0, normal IP routing will take * place (using, for example, the default gateway IP address returned * by the DHCP server). * * If s_PXENV_UDP_WRITE::src_port is 0, port 2069 will be used. * * You must have opened a UDP connection with pxenv_udp_open() before * calling pxenv_udp_write(). (This is not strictly true for * Etherboot; see the relevant @ref pxe_note_udp "implementation note" * for more details.) * * On x86, you must set the s_PXE::StatusCallout field to a nonzero * value before calling this function in protected mode. You cannot * call this function with a 32-bit stack segment. (See the relevant * @ref pxe_x86_pmode16 "implementation note" for more details.) * * @bug s_PXENV_UDP_WRITE::gw is ignored; the default routing table is * always used. * */ PXENV_EXIT_t pxenv_udp_write ( struct s_PXENV_UDP_WRITE *udp_write ) { uint16_t src_port; uint16_t dst_port; struct udppacket *packet = (struct udppacket *)nic.packet; int packet_size; DBG ( "PXENV_UDP_WRITE" ); ENSURE_READY ( udp_write ); /* PXE spec says source port is 2069 if not specified */ src_port = ntohs(udp_write->src_port); if ( src_port == 0 ) src_port = 2069; dst_port = ntohs(udp_write->dst_port); DBG ( " %d->%@:%d (%d)", src_port, udp_write->ip, dst_port, udp_write->buffer_size ); /* FIXME: we ignore the gateway specified, since we're * confident of being able to do our own routing. We should * probably allow for multiple gateways. */ /* Copy payload to packet buffer */ packet_size = ( (void*)&packet->payload - (void*)packet ) + udp_write->buffer_size; if ( packet_size > ETH_FRAME_LEN ) { udp_write->Status = PXENV_STATUS_OUT_OF_RESOURCES; return PXENV_EXIT_FAILURE; } memcpy ( &packet->payload, SEGOFF16_TO_PTR(udp_write->buffer), udp_write->buffer_size ); /* Transmit packet */ if ( ! udp_transmit ( udp_write->ip, src_port, dst_port, packet_size, packet ) ) { udp_write->Status = errno; return PXENV_EXIT_FAILURE; } udp_write->Status = PXENV_STATUS_SUCCESS; return PXENV_EXIT_SUCCESS; } /* Utility function for pxenv_udp_read() */ static int await_pxe_udp ( int ival __unused, void *ptr, unsigned short ptype __unused, struct iphdr *ip, struct udphdr *udp, struct tcphdr *tcp __unused ) { struct s_PXENV_UDP_READ *udp_read = (struct s_PXENV_UDP_READ*)ptr; uint16_t d_port; size_t size; /* Ignore non-UDP packets */ if ( !udp ) { DBG ( " non-UDP" ); return 0; } /* Check dest_ip */ if ( udp_read->dest_ip && ( udp_read->dest_ip != ip->dest.s_addr ) ) { DBG ( " wrong dest IP (got %@, wanted %@)", ip->dest.s_addr, udp_read->dest_ip ); return 0; } /* Check dest_port */ d_port = ntohs ( udp_read->d_port ); if ( d_port && ( d_port != ntohs(udp->dest) ) ) { DBG ( " wrong dest port (got %d, wanted %d)", ntohs(udp->dest), d_port ); return 0; } /* Copy packet to buffer and fill in information */ udp_read->src_ip = ip->src.s_addr; udp_read->s_port = udp->src; /* Both in network order */ size = ntohs(udp->len) - sizeof(*udp); /* Workaround: NTLDR expects us to fill these in, even though * PXESPEC clearly defines them as input parameters. */ udp_read->dest_ip = ip->dest.s_addr; udp_read->d_port = udp->dest; DBG ( " %@:%d->%@:%d (%d)", udp_read->src_ip, ntohs(udp_read->s_port), udp_read->dest_ip, ntohs(udp_read->d_port), size ); if ( udp_read->buffer_size < size ) { /* PXESPEC: what error code should we actually return? */ DBG ( " buffer too small (%d)", udp_read->buffer_size ); udp_read->Status = PXENV_STATUS_OUT_OF_RESOURCES; return 0; } memcpy ( SEGOFF16_TO_PTR ( udp_read->buffer ), &udp->payload, size ); udp_read->buffer_size = size; return 1; } /** * UDP READ * * @v udp_read Pointer to a struct s_PXENV_UDP_READ * @v s_PXENV_UDP_READ::dest_ip Destination IP address, or 0.0.0.0 * @v s_PXENV_UDP_READ::d_port Destination UDP port, or 0 * @v s_PXENV_UDP_READ::buffer_size Size of the UDP payload buffer * @v s_PXENV_UDP_READ::buffer Address of the UDP payload buffer * @ret #PXENV_EXIT_SUCCESS A packet has been received * @ret #PXENV_EXIT_FAILURE No packet has been received * @ret s_PXENV_UDP_READ::Status PXE status code * @ret s_PXENV_UDP_READ::src_ip Source IP address * @ret s_PXENV_UDP_READ::dest_ip Destination IP address * @ret s_PXENV_UDP_READ::s_port Source UDP port * @ret s_PXENV_UDP_READ::d_port Destination UDP port * @ret s_PXENV_UDP_READ::buffer_size Length of UDP payload * @err #PXENV_STATUS_UNDI_INVALID_STATE NIC could not be initialised * @err #PXENV_STATUS_OUT_OF_RESOURCES Buffer was too small for payload * @err #PXENV_STATUS_FAILURE No packet was ready to read * * Receive a single UDP packet. This is a non-blocking call; if no * packet is ready to read, the call will return instantly with * s_PXENV_UDP_READ::Status==PXENV_STATUS_FAILURE. * * If s_PXENV_UDP_READ::dest_ip is 0.0.0.0, UDP packets addressed to * any IP address will be accepted and may be returned to the caller. * * If s_PXENV_UDP_READ::d_port is 0, UDP packets addressed to any UDP * port will be accepted and may be returned to the caller. * * You must have opened a UDP connection with pxenv_udp_open() before * calling pxenv_udp_read(). (This is not strictly true for * Etherboot; see the relevant @ref pxe_note_udp "implementation note" * for more details.) * * On x86, you must set the s_PXE::StatusCallout field to a nonzero * value before calling this function in protected mode. You cannot * call this function with a 32-bit stack segment. (See the relevant * @ref pxe_x86_pmode16 "implementation note" for more details.) * * @note The PXE specification (version 2.1) does not state that we * should fill in s_PXENV_UDP_READ::dest_ip and * s_PXENV_UDP_READ::d_port, but Microsoft Windows' NTLDR program * expects us to do so, and will fail if we don't. * */ PXENV_EXIT_t pxenv_udp_read ( struct s_PXENV_UDP_READ *udp_read ) { DBG ( "PXENV_UDP_READ" ); ENSURE_READY ( udp_read ); /* Use await_reply with a timeout of zero */ /* Allow await_reply to change Status if necessary */ udp_read->Status = PXENV_STATUS_FAILURE; if ( ! await_reply ( await_pxe_udp, 0, udp_read, 0 ) ) { return PXENV_EXIT_FAILURE; } udp_read->Status = PXENV_STATUS_SUCCESS; return PXENV_EXIT_SUCCESS; } /** @page pxe_notes PXE implementation notes @section pxe_note_udp The connectionless nature of UDP The PXE specification states that it is possible to have only one open UDP or TFTP connection at any one time. Etherboot does not rigourously enforce this restriction, on the UNIX principle that the code should not prevent the user from doing stupid things, because that would also prevent the user from doing clever things. Since UDP is a connectionless protocol, it is perfectly possible to have multiple concurrent UDP "connections" open, provided that you take the multiplicity of connections into account when calling pxenv_udp_read(). Similarly, there is no technical reason that prevents you from calling pxenv_udp_write() in the middle of a TFTP download. Etherboot will therefore never return error codes indicating "a connection is already open", such as #PXENV_STATUS_UDP_OPEN. If you want to have multiple concurrent connections, go for it (but don't expect your perfectly sensible code to work with any other PXE stack). Since Etherboot treats UDP as the connectionless protocol that it really is, pxenv_udp_close() is actually a no-op, and there is no need to call pxenv_udp_open() before using pxenv_udp_write() or pxenv_udp_read(). */