Michael Brown
a9369bb503
Leave protected-mode return address on PM stack when issuing a
...
real_call(), rather than moving it to the RM stack and back again.
This allows the real-mode function to completely destroy the stack
contents, provided that it manages to return to real_call().
2007-01-09 14:13:06 +00:00
Michael Brown
2eeb7c4fe7
Define "connected" as
...
"when SYN is ACKed and we have already received SYN", or
"when SYN is received and we have already had SYN ACKed"
rather than just
"when SYN is ACKed"
This avoids spuriously calling the connected() method when we receive
a RST,ACK in response to a SYN.
2007-01-09 05:01:22 +00:00
Michael Brown
70cc3a164a
Reset character attributes before start of welcome banner, in case
...
it's a serial console and remembers state from the previous program
run.
2007-01-09 04:51:27 +00:00
Michael Brown
aaca21a2b6
We can't assert that the RX engine is idle in iscsi_done(), because it
...
may be called during the RX data processor, before the RX engine
transitions back to idle. It doesn't really matter if the RX engine
isn't idle when iscsi_done() is called, because it will just pick up
where it left off on the next call. (The same is not true for the TX
engine, so keep the TX engine assertion.)
2007-01-09 04:42:23 +00:00
Michael Brown
6ea07b9247
Use debug auto-colourisation.
2007-01-09 04:38:39 +00:00
Michael Brown
76525294ee
Clean up connection closing and permanent failure logic.
2007-01-09 04:31:33 +00:00
Michael Brown
2738bdf74b
Obsoleted by drivers/net/undionly.c
2007-01-09 03:22:11 +00:00
Michael Brown
d606edb41d
Added UNDI root bus driver (which saves including all the PCI bus code,
...
UNDI ROM code etc. when you just want a "undi.kpxe"-type image).
This driver cannot be used in conjunction with any other driver (it will
crash), or in any other format than .kpxe (it just won't find any network
devices).
2007-01-09 03:20:22 +00:00
Michael Brown
159930862f
Added missing call to undinet_remove()
2007-01-09 03:08:01 +00:00
Michael Brown
6b09dd8244
undipci_probe() has to calculate busdevfn anyway, so we may as well pass
...
it directly to undi_load_pci().
2007-01-09 02:58:07 +00:00
Michael Brown
ed44e3730d
Avoid erasing non-existent signatures in undi_unload()
2007-01-09 02:53:24 +00:00
Michael Brown
a2be828a33
Avoid leaving preloaded_undi with invalid PXENV+/!PXE structure
...
addresses if the signature checks fail.
2007-01-09 02:52:28 +00:00
Michael Brown
697bcc9d24
Since we now always unload the base code stack (even if we keep UNDI),
...
we can never return to the PXE stack and must always use INT 18.
2007-01-09 02:46:58 +00:00
Michael Brown
f2f492a536
If preloaded device matches, use that rather than going via the UNDI
...
loader.
2007-01-09 02:32:06 +00:00
Michael Brown
2436dac281
Populate preloaded_undi device when applicable.
2007-01-09 02:29:54 +00:00
Michael Brown
937289cdc8
Provide storage for an undi_device structure representing the preloaded
...
UNDI stack.
2007-01-09 02:29:18 +00:00
Michael Brown
47222d5ed8
Call PXENV_UNDI_GET_NIC_TYPE to identify NIC physical device.
...
Record all information required for populating a struct undi_device.
Make debugging output more human-readable.
2007-01-09 01:42:28 +00:00
Michael Brown
cea2221737
Use fixed-width fields in struct undi_device, so that pxeprefix.S will be
...
able to populate the structure.
2007-01-09 01:41:26 +00:00
Michael Brown
fbdebac5f4
Copy pxelinux's shutdown sequence: use UNLOAD_STACK without STOP_BASE,
...
and call UNDI_SHUTDOWN first to make sure the NIC is in a safe state.
2007-01-08 05:06:26 +00:00
Michael Brown
8f8af10b22
New strategy: always stop both base code and UNDI. Always free base code
...
memory (unless we get an error while stopping the base code). Leave UNDI
resident (though stopped) for .kpxe.
Still need to add code to record the device identification parameters
prior to stopping UNDI.
2007-01-08 03:48:26 +00:00
Michael Brown
075d79f6d4
Checking in obsolete but working memory-scanning code just for the record
2007-01-08 03:45:00 +00:00
Michael Brown
67e824b539
Neaten up debug messages
2007-01-08 03:42:19 +00:00
Michael Brown
f08093b0d9
Remove spurious debug message
2007-01-08 03:37:32 +00:00
Michael Brown
f0edd11c7d
Now split out into undirom.c and undiload.c
2007-01-08 03:35:51 +00:00
Michael Brown
07e5d4e3dc
Added any-PCI-device UNDI driver
2007-01-08 03:34:47 +00:00
Michael Brown
66f7bcc785
Tidied up debug messages
2007-01-08 03:34:06 +00:00
Michael Brown
79c5f0ba04
Added PCI_BASE_CLASS() macro
2007-01-08 03:32:41 +00:00
Michael Brown
5af4918356
Added support for wildcard device/vendor ID matches
2007-01-08 03:23:38 +00:00
Michael Brown
20c9fc407e
Remove types and prototypes now provided in the undi*.h headers.
2007-01-08 03:05:34 +00:00
Michael Brown
a6ba48e51e
Added debugging statements
2007-01-08 03:04:54 +00:00
Michael Brown
239965ff3b
Added missing includes
2007-01-08 03:03:42 +00:00
Michael Brown
6115356859
Added missing declarations
2007-01-08 02:51:27 +00:00
Michael Brown
aff96c13d2
Added missing include
2007-01-08 02:51:04 +00:00
Michael Brown
afc01a1a7f
Split UNDI load/unload out into undiload.c.
2007-01-08 02:48:17 +00:00
Michael Brown
359c888aec
Remove obsolete includes
2007-01-08 02:39:56 +00:00
Michael Brown
6fc75f659b
Separated out UNDI ROM location code into undirom.c, and use struct
...
undi_rom rather than struct pxe_driver. (This is part of the naming
consistency fixes).
2007-01-08 02:38:10 +00:00
Michael Brown
675fe200e5
Use "struct undi_device" instead of "struct pxe_device", and use the
...
function prefix "undinet_" and the variable name "undinic" in undinet.c,
so that we can reserve the variable name "undi" for a struct undi_device.
The idea is that we preserve the Etherboot 5.4 convention that the "UNDI"
code refers to our using an underlying UNDI stack, while the "PXE" code
refers to our providing a PXE API.
2007-01-08 02:24:53 +00:00
Michael Brown
36c1e1aa57
Renamed undi.c to undinet.c. (undi.c will become the UNDI PCI driver)
2007-01-08 02:02:07 +00:00
Michael Brown
234d81728a
Obsolete
2007-01-08 02:00:55 +00:00
Michael Brown
7b9617f5df
Add device to hierarchy before calling the driver's probe() function; this
...
way everything remains consistent if the probe() ends up creating child
devices.
2007-01-08 01:29:51 +00:00
Michael Brown
d3558fdd3a
Remove accidentally checked-in code
2007-01-07 19:05:28 +00:00
Michael Brown
85a41b25fe
Move START_UNDI, UNDI_STARTUP, UNDI_INITIALIZE and
...
UNDI_GET_INFORMATION calls into drivers/net/undi.c. undi_probe() now
gets given a pxe_device representing a PXE stack that has been loaded
into memory but not initialised in any way.
2007-01-07 19:02:17 +00:00
Michael Brown
23cb837951
Remember to enable/disable the interrupt at the PIC.
...
Handle failures in undi_open() properly.
2007-01-07 13:31:39 +00:00
Michael Brown
9ab5c0dde7
Remove redundant debug message
2007-01-05 16:15:50 +00:00
Michael Brown
fa9055197d
UNDI loader routine now works
2007-01-05 16:11:05 +00:00
Michael Brown
477a70697a
Added PnP BIOS scanning code, separated out from the UNDI driver
2007-01-05 16:10:03 +00:00
Marty Connor
7dee2556f4
Fixed typo
2007-01-05 16:09:47 +00:00
Michael Brown
d0a3cc3417
Avoid creating implicit memcpy()s
2007-01-05 14:48:20 +00:00
Michael Brown
9780fef360
Partial implementation of UNDI loader caller.
2007-01-05 03:24:39 +00:00
Michael Brown
0638945c7e
Add PXE driver-scanning code, capable of locating all PXE ROMs in a system
...
and matching them up to (e.g. PCI) devices.
2007-01-05 01:52:06 +00:00
