2
0
mirror of https://github.com/xcat2/xNBA.git synced 2024-12-12 14:26:34 +00:00

[pxe] Fix interoperability with the 3Com DOS UNDI driver

The 3Com DOS UNDI driver fails when run on top of gPXE for two
reasons: firstly because PXENV_UNDI_SET_PACKET_FILTER is unsupported,
and secondly because gPXE enters the NBP without enabling interrupts
on the NIC, and the 3Com driver never calls PXENV_UNDI_OPEN.

Fix by always returning success from PXENV_UNDI_SET_PACKET_FILTER
(which is no worse than the current situation, since we already ignore
the receive packet filter in PXENV_UNDI_OPEN), and by forcibly
enabling interrupts on the NIC within PXENV_UNDI_TRANSMIT.  The latter
is something of a hack, but avoids the need to implement a complete
base-code ISR that we would otherwise need if we were to enter the NBP
with interrupts enabled.
This commit is contained in:
Michael Brown 2009-06-23 21:54:50 +01:00
parent ded4d3a703
commit 4f881ae352

View File

@ -211,6 +211,12 @@ PXENV_EXIT_t pxenv_undi_transmit ( struct s_PXENV_UNDI_TRANSMIT
DBG ( "PXENV_UNDI_TRANSMIT" );
/* Forcibly enable interrupts at this point, to work around
* callers that never call PXENV_UNDI_OPEN before attempting
* to use the UNDI API.
*/
netdev_irq ( pxe_netdev, 1 );
/* Identify network-layer protocol */
switch ( undi_transmit->Protocol ) {
case P_IP: net_protocol = &ipv4_protocol; break;
@ -341,10 +347,17 @@ pxenv_undi_set_station_address ( struct s_PXENV_UNDI_SET_STATION_ADDRESS
PXENV_EXIT_t
pxenv_undi_set_packet_filter ( struct s_PXENV_UNDI_SET_PACKET_FILTER
*undi_set_packet_filter ) {
DBG ( "PXENV_UNDI_SET_PACKET_FILTER" );
undi_set_packet_filter->Status = PXENV_STATUS_UNSUPPORTED;
return PXENV_EXIT_FAILURE;
/* Pretend that we succeeded, otherwise the 3Com DOS UNDI
* driver refuses to load. (We ignore the filter value in the
* PXENV_UNDI_OPEN call anyway.)
*/
DBG ( " %02x", undi_set_packet_filter->filter );
undi_set_packet_filter->Status = PXENV_STATUS_SUCCESS;
return PXENV_EXIT_SUCCESS;
}
/* PXENV_UNDI_GET_INFORMATION