xCAT/xNBA
2
0
Fork 0
mirror of https://github.com/xcat2/xNBA.git synced 2024-12-16 16:21:32 +00:00
Code Issues Projects Releases Wiki Activity
bd9ae7cc70
xNBA/src/drivers/net/tg3.c

3393 lines
93 KiB
C
Raw Normal View History

Initial revision
2005-03-08 18:53:11 +00:00
/* $Id$
* tg3.c: Broadcom Tigon3 ethernet driver.
*
* Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)
* Copyright (C) 2001, 2002 Jeff Garzik (jgarzik@mandrakesoft.com)
* Copyright (C) 2003 Eric Biederman (ebiederman@lnxi.com) [etherboot port]
*/
/* 11-13-2003 timlegge Fix Issue with NetGear GA302T
* 11-18-2003 ebiederm Generalize NetGear Fix to what the code was supposed to be.
* 01-06-2005 Alf (Frederic Olivie) Add Dell bcm 5751 (0x1677) support
*/
#include "etherboot.h"
#include "nic.h"
#include "pci.h"
#include "timer.h"
#include "string.h"
#include "tg3.h"
#define SUPPORT_COPPER_PHY 1
#define SUPPORT_FIBER_PHY 1
#define SUPPORT_LINK_REPORT 1
#define SUPPORT_PARTNO_STR 1
#define SUPPORT_PHY_STR 1
struct tg3 tg3;
/* Dummy defines for error handling */
#define EBUSY 1
#define ENODEV 2
#define EINVAL 3
#define ENOMEM 4
/* These numbers seem to be hard coded in the NIC firmware somehow.
* You can't change the ring sizes, but you can change where you place
* them in the NIC onboard memory.
*/
#define TG3_RX_RING_SIZE 512
#define TG3_DEF_RX_RING_PENDING 20 /* RX_RING_PENDING seems to be o.k. at 20 and 200 */
#define TG3_RX_RCB_RING_SIZE 1024
/* (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 ? \
512 : 1024) */
#define TG3_TX_RING_SIZE 512
#define TG3_DEF_TX_RING_PENDING (TG3_TX_RING_SIZE - 1)
#define TG3_RX_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * TG3_RX_RING_SIZE)
#define TG3_RX_RCB_RING_BYTES (sizeof(struct tg3_rx_buffer_desc) * TG3_RX_RCB_RING_SIZE)
#define TG3_TX_RING_BYTES (sizeof(struct tg3_tx_buffer_desc) * TG3_TX_RING_SIZE)
#define NEXT_TX(N) (((N) + 1) & (TG3_TX_RING_SIZE - 1))
#define PREV_TX(N) (((N) - 1) & (TG3_TX_RING_SIZE - 1))
#define RX_PKT_BUF_SZ (1536 + 2 + 64)
static struct bss {
struct tg3_rx_buffer_desc rx_std[TG3_RX_RING_SIZE];
struct tg3_rx_buffer_desc rx_rcb[TG3_RX_RCB_RING_SIZE];
struct tg3_tx_buffer_desc tx_ring[TG3_TX_RING_SIZE];
struct tg3_hw_status hw_status;
struct tg3_hw_stats hw_stats;
unsigned char rx_bufs[TG3_DEF_RX_RING_PENDING][RX_PKT_BUF_SZ];
} tg3_bss;
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
* @buffer: - buffer to hold config space context
*
* @buffer must be large enough to hold the entire PCI 2.2 config space
* (>= 64 bytes).
*/
static int pci_save_state(struct pci_device *dev, uint32_t *buffer)
{
int i;
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&buffer[i]);
return 0;
}
/**
* pci_restore_state - Restore the saved state of a PCI device
* @dev: - PCI device that we're dealing with
* @buffer: - saved PCI config space
*
*/
static int pci_restore_state(struct pci_device *dev, uint32_t *buffer)
{
int i;
for (i = 0; i < 16; i++)
pci_write_config_dword(dev,i * 4, buffer[i]);
return 0;
}
static void tg3_write_indirect_reg32(uint32_t off, uint32_t val)
{
pci_write_config_dword(tg3.pdev, TG3PCI_REG_BASE_ADDR, off);
pci_write_config_dword(tg3.pdev, TG3PCI_REG_DATA, val);
}
#define tw32(reg,val) tg3_write_indirect_reg32((reg),(val))
#define tw32_mailbox(reg, val) writel(((val) & 0xffffffff), tg3.regs + (reg))
#define tw16(reg,val) writew(((val) & 0xffff), tg3.regs + (reg))
#define tw8(reg,val) writeb(((val) & 0xff), tg3.regs + (reg))
#define tr32(reg) readl(tg3.regs + (reg))
#define tr16(reg) readw(tg3.regs + (reg))
#define tr8(reg) readb(tg3.regs + (reg))
static void tw32_carefully(uint32_t reg, uint32_t val)
{
tw32(reg, val);
tr32(reg);
udelay(100);
}
static void tw32_mailbox2(uint32_t reg, uint32_t val)
{
tw32_mailbox(reg, val);
tr32(reg);
}
static void tg3_write_mem(uint32_t off, uint32_t val)
{
pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_DATA, val);
/* Always leave this as zero. */
pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
}
static void tg3_read_mem(uint32_t off, uint32_t *val)
{
pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
pci_read_config_dword(tg3.pdev, TG3PCI_MEM_WIN_DATA, val);
/* Always leave this as zero. */
pci_write_config_dword(tg3.pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
}
static void tg3_disable_ints(struct tg3 *tp)
{
tw32(TG3PCI_MISC_HOST_CTRL,
(tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
tw32_mailbox2(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
}
static void tg3_switch_clocks(struct tg3 *tp)
{
uint32_t orig_clock_ctrl, clock_ctrl;
clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
orig_clock_ctrl = clock_ctrl;
clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN | CLOCK_CTRL_CLKRUN_OENABLE | 0x1f);
tp->pci_clock_ctrl = clock_ctrl;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) &&
(!((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)
&& (tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) &&
(orig_clock_ctrl & CLOCK_CTRL_44MHZ_CORE)!=0) {
tw32_carefully(TG3PCI_CLOCK_CTRL,
clock_ctrl | (CLOCK_CTRL_44MHZ_CORE | CLOCK_CTRL_ALTCLK));
tw32_carefully(TG3PCI_CLOCK_CTRL,
clock_ctrl | (CLOCK_CTRL_ALTCLK));
}
tw32_carefully(TG3PCI_CLOCK_CTRL, clock_ctrl);
}
#define PHY_BUSY_LOOPS 5000
static int tg3_readphy(struct tg3 *tp, int reg, uint32_t *val)
{
uint32_t frame_val;
int loops, ret;
tw32_carefully(MAC_MI_MODE, tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL);
*val = 0xffffffff;
frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
frame_val |= (MI_COM_CMD_READ | MI_COM_START);
tw32_carefully(MAC_MI_COM, frame_val);
loops = PHY_BUSY_LOOPS;
while (loops-- > 0) {
udelay(10);
frame_val = tr32(MAC_MI_COM);
if ((frame_val & MI_COM_BUSY) == 0) {
udelay(5);
frame_val = tr32(MAC_MI_COM);
break;
}
}
ret = -EBUSY;
if (loops > 0) {
*val = frame_val & MI_COM_DATA_MASK;
ret = 0;
}
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
return ret;
}
static int tg3_writephy(struct tg3 *tp, int reg, uint32_t val)
{
uint32_t frame_val;
int loops, ret;
tw32_carefully(MAC_MI_MODE, tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL);
frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
MI_COM_PHY_ADDR_MASK);
frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
MI_COM_REG_ADDR_MASK);
frame_val |= (val & MI_COM_DATA_MASK);
frame_val |= (MI_COM_CMD_WRITE | MI_COM_START);
tw32_carefully(MAC_MI_COM, frame_val);
loops = PHY_BUSY_LOOPS;
while (loops-- > 0) {
udelay(10);
frame_val = tr32(MAC_MI_COM);
if ((frame_val & MI_COM_BUSY) == 0) {
udelay(5);
frame_val = tr32(MAC_MI_COM);
break;
}
}
ret = -EBUSY;
if (loops > 0)
ret = 0;
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
return ret;
}
static int tg3_writedsp(struct tg3 *tp, uint16_t addr, uint16_t val)
{
int err;
err = tg3_writephy(tp, MII_TG3_DSP_ADDRESS, addr);
err |= tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
return err;
}
static void tg3_phy_set_wirespeed(struct tg3 *tp)
{
uint32_t val;
if (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED)
return;
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007);
tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
tg3_writephy(tp, MII_TG3_AUX_CTRL, (val | (1 << 15) | (1 << 4)));
}
static int tg3_bmcr_reset(struct tg3 *tp)
{
uint32_t phy_control;
int limit, err;
/* OK, reset it, and poll the BMCR_RESET bit until it
* clears or we time out.
*/
phy_control = BMCR_RESET;
err = tg3_writephy(tp, MII_BMCR, phy_control);
if (err != 0)
return -EBUSY;
limit = 5000;
while (limit--) {
err = tg3_readphy(tp, MII_BMCR, &phy_control);
if (err != 0)
return -EBUSY;
if ((phy_control & BMCR_RESET) == 0) {
udelay(40);
break;
}
udelay(10);
}
if (limit <= 0)
return -EBUSY;
return 0;
}
static int tg3_wait_macro_done(struct tg3 *tp)
{
int limit = 100;
while (limit--) {
uint32_t tmp32;
tg3_readphy(tp, 0x16, &tmp32);
if ((tmp32 & 0x1000) == 0)
break;
}
if (limit <= 0)
return -EBUSY;
return 0;
}
static int tg3_phy_write_and_check_testpat(struct tg3 *tp, int *resetp)
{
static const uint32_t test_pat[4][6] = {
{ 0x00005555, 0x00000005, 0x00002aaa, 0x0000000a, 0x00003456, 0x00000003 },
{ 0x00002aaa, 0x0000000a, 0x00003333, 0x00000003, 0x0000789a, 0x00000005 },
{ 0x00005a5a, 0x00000005, 0x00002a6a, 0x0000000a, 0x00001bcd, 0x00000003 },
{ 0x00002a5a, 0x0000000a, 0x000033c3, 0x00000003, 0x00002ef1, 0x00000005 }
};
int chan;
for (chan = 0; chan < 4; chan++) {
int i;
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
(chan * 0x2000) | 0x0200);
tg3_writephy(tp, 0x16, 0x0002);
for (i = 0; i < 6; i++)
tg3_writephy(tp, MII_TG3_DSP_RW_PORT,
test_pat[chan][i]);
tg3_writephy(tp, 0x16, 0x0202);
if (tg3_wait_macro_done(tp)) {
*resetp = 1;
return -EBUSY;
}
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
(chan * 0x2000) | 0x0200);
tg3_writephy(tp, 0x16, 0x0082);
if (tg3_wait_macro_done(tp)) {
*resetp = 1;
return -EBUSY;
}
tg3_writephy(tp, 0x16, 0x0802);
if (tg3_wait_macro_done(tp)) {
*resetp = 1;
return -EBUSY;
}
for (i = 0; i < 6; i += 2) {
uint32_t low, high;
tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &low);
tg3_readphy(tp, MII_TG3_DSP_RW_PORT, &high);
if (tg3_wait_macro_done(tp)) {
*resetp = 1;
return -EBUSY;
}
low &= 0x7fff;
high &= 0x000f;
if (low != test_pat[chan][i] ||
high != test_pat[chan][i+1]) {
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000b);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4001);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x4005);
return -EBUSY;
}
}
}
return 0;
}
static int tg3_phy_reset_chanpat(struct tg3 *tp)
{
int chan;
for (chan = 0; chan < 4; chan++) {
int i;
tg3_writephy(tp, MII_TG3_DSP_ADDRESS,
(chan * 0x2000) | 0x0200);
tg3_writephy(tp, 0x16, 0x0002);
for (i = 0; i < 6; i++)
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x000);
tg3_writephy(tp, 0x16, 0x0202);
if (tg3_wait_macro_done(tp))
return -EBUSY;
}
return 0;
}
static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
{
uint32_t reg32, phy9_orig;
int retries, do_phy_reset, err;
retries = 10;
do_phy_reset = 1;
do {
if (do_phy_reset) {
err = tg3_bmcr_reset(tp);
if (err)
return err;
do_phy_reset = 0;
}
/* Disable transmitter and interrupt. */
tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32);
reg32 |= 0x3000;
tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
/* Set full-duplex, 1000 mbps. */
tg3_writephy(tp, MII_BMCR,
BMCR_FULLDPLX | TG3_BMCR_SPEED1000);
/* Set to master mode. */
tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig);
tg3_writephy(tp, MII_TG3_CTRL,
(MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER));
/* Enable SM_DSP_CLOCK and 6dB. */
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
/* Block the PHY control access. */
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0800);
err = tg3_phy_write_and_check_testpat(tp, &do_phy_reset);
if (!err)
break;
} while (--retries);
err = tg3_phy_reset_chanpat(tp);
if (err)
return err;
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8005);
tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x0000);
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200);
tg3_writephy(tp, 0x16, 0x0000);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
tg3_writephy(tp, MII_TG3_CTRL, phy9_orig);
tg3_readphy(tp, MII_TG3_EXT_CTRL, &reg32);
reg32 &= ~0x3000;
tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
return err;
}
/* This will reset the tigon3 PHY if there is no valid
* link.
*/
static int tg3_phy_reset(struct tg3 *tp)
{
uint32_t phy_status;
int err;
err = tg3_readphy(tp, MII_BMSR, &phy_status);
err |= tg3_readphy(tp, MII_BMSR, &phy_status);
if (err != 0)
return -EBUSY;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
err = tg3_phy_reset_5703_4_5(tp);
if (err)
return err;
goto out;
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
// Taken from Broadcom's source code
tg3_writephy(tp, 0x18, 0x0c00);
tg3_writephy(tp, 0x17, 0x000a);
tg3_writephy(tp, 0x15, 0x310b);
tg3_writephy(tp, 0x17, 0x201f);
tg3_writephy(tp, 0x15, 0x9506);
tg3_writephy(tp, 0x17, 0x401f);
tg3_writephy(tp, 0x15, 0x14e2);
tg3_writephy(tp, 0x18, 0x0400);
}
err = tg3_bmcr_reset(tp);
if (err)
return err;
out:
tg3_phy_set_wirespeed(tp);
return 0;
}
static void tg3_set_power_state_0(struct tg3 *tp)
{
uint16_t power_control;
int pm = tp->pm_cap;
/* Make sure register accesses (indirect or otherwise)
* will function correctly.
*/
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl);
pci_read_config_word(tp->pdev, pm + PCI_PM_CTRL, &power_control);
power_control |= PCI_PM_CTRL_PME_STATUS;
power_control &= ~(PCI_PM_CTRL_STATE_MASK);
power_control |= 0;
pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control);
tw32_carefully(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
return;
}
#if SUPPORT_LINK_REPORT
static void tg3_link_report(struct tg3 *tp)
{
if (!tp->carrier_ok) {
printf("Link is down.\n");
} else {
printf("Link is up at %d Mbps, %s duplex. %s %s %s\n",
(tp->link_config.active_speed == SPEED_1000 ?
1000 :
(tp->link_config.active_speed == SPEED_100 ?
100 : 10)),
(tp->link_config.active_duplex == DUPLEX_FULL ?
"full" : "half"),
(tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "TX" : "",
(tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "RX" : "",
(tp->tg3_flags & (TG3_FLAG_TX_PAUSE |TG3_FLAG_RX_PAUSE)) ? "flow control" : "");
}
}
#else
#define tg3_link_report(tp)
#endif
static void tg3_setup_flow_control(struct tg3 *tp, uint32_t local_adv, uint32_t remote_adv)
{
uint32_t new_tg3_flags = 0;
if (local_adv & ADVERTISE_PAUSE_CAP) {
if (local_adv & ADVERTISE_PAUSE_ASYM) {
if (remote_adv & LPA_PAUSE_CAP)
new_tg3_flags |=
(TG3_FLAG_RX_PAUSE |
TG3_FLAG_TX_PAUSE);
else if (remote_adv & LPA_PAUSE_ASYM)
new_tg3_flags |=
(TG3_FLAG_RX_PAUSE);
} else {
if (remote_adv & LPA_PAUSE_CAP)
new_tg3_flags |=
(TG3_FLAG_RX_PAUSE |
TG3_FLAG_TX_PAUSE);
}
} else if (local_adv & ADVERTISE_PAUSE_ASYM) {
if ((remote_adv & LPA_PAUSE_CAP) &&
(remote_adv & LPA_PAUSE_ASYM))
new_tg3_flags |= TG3_FLAG_TX_PAUSE;
}
tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);
tp->tg3_flags |= new_tg3_flags;
if (new_tg3_flags & TG3_FLAG_RX_PAUSE)
tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;
else
tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
if (new_tg3_flags & TG3_FLAG_TX_PAUSE)
tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;
else
tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
}
#if SUPPORT_COPPER_PHY
static void tg3_aux_stat_to_speed_duplex(
struct tg3 *tp __unused, uint32_t val, uint8_t *speed, uint8_t *duplex)
{
static const uint8_t map[] = {
[0] = (SPEED_INVALID << 2) | DUPLEX_INVALID,
[MII_TG3_AUX_STAT_10HALF >> 8] = (SPEED_10 << 2) | DUPLEX_HALF,
[MII_TG3_AUX_STAT_10FULL >> 8] = (SPEED_10 << 2) | DUPLEX_FULL,
[MII_TG3_AUX_STAT_100HALF >> 8] = (SPEED_100 << 2) | DUPLEX_HALF,
[MII_TG3_AUX_STAT_100_4 >> 8] = (SPEED_INVALID << 2) | DUPLEX_INVALID,
[MII_TG3_AUX_STAT_100FULL >> 8] = (SPEED_100 << 2) | DUPLEX_FULL,
[MII_TG3_AUX_STAT_1000HALF >> 8] = (SPEED_1000 << 2) | DUPLEX_HALF,
[MII_TG3_AUX_STAT_1000FULL >> 8] = (SPEED_1000 << 2) | DUPLEX_FULL,
};
uint8_t result;
result = map[(val & MII_TG3_AUX_STAT_SPDMASK) >> 8];
*speed = result >> 2;
*duplex = result & 3;
}
static int tg3_phy_copper_begin(struct tg3 *tp)
{
uint32_t new_adv;
tp->link_config.advertising =
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
ADVERTISED_Autoneg | ADVERTISED_MII);
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY) {
tp->link_config.advertising &=
~(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full);
}
new_adv = (ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
if (tp->link_config.advertising & ADVERTISED_10baseT_Half) {
new_adv |= ADVERTISE_10HALF;
}
if (tp->link_config.advertising & ADVERTISED_10baseT_Full) {
new_adv |= ADVERTISE_10FULL;
}
if (tp->link_config.advertising & ADVERTISED_100baseT_Half) {
new_adv |= ADVERTISE_100HALF;
}
if (tp->link_config.advertising & ADVERTISED_100baseT_Full) {
new_adv |= ADVERTISE_100FULL;
}
tg3_writephy(tp, MII_ADVERTISE, new_adv);
if (tp->link_config.advertising &
(ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full)) {
new_adv = 0;
if (tp->link_config.advertising & ADVERTISED_1000baseT_Half) {
new_adv |= MII_TG3_CTRL_ADV_1000_HALF;
}
if (tp->link_config.advertising & ADVERTISED_1000baseT_Full) {
new_adv |= MII_TG3_CTRL_ADV_1000_FULL;
}
if (!(tp->tg3_flags & TG3_FLAG_10_100_ONLY) &&
(tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0)) {
new_adv |= (MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
}
tg3_writephy(tp, MII_TG3_CTRL, new_adv);
} else {
tg3_writephy(tp, MII_TG3_CTRL, 0);
}
tg3_writephy(tp, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
return 0;
}
static int tg3_init_5401phy_dsp(struct tg3 *tp)
{
int err;
/* Turn off tap power management. */
err = tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c20);
err |= tg3_writedsp(tp, 0x0012, 0x1804);
err |= tg3_writedsp(tp, 0x0013, 0x1204);
err |= tg3_writedsp(tp, 0x8006, 0x0132);
err |= tg3_writedsp(tp, 0x8006, 0x0232);
err |= tg3_writedsp(tp, 0x201f, 0x0a20);
udelay(40);
return err;
}
static int tg3_setup_copper_phy(struct tg3 *tp)
{
int current_link_up;
uint32_t bmsr, dummy;
int i, err;
tw32_carefully(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED
| MAC_STATUS_LNKSTATE_CHANGED));
tp->mi_mode = MAC_MI_MODE_BASE;
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x02);
/* Some third-party PHYs need to be reset on link going
* down.
*/
if ( ( (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(tp->pci_chip_rev_id == CHIPREV_ID_5705_A0)) &&
(tp->carrier_ok)) {
tg3_readphy(tp, MII_BMSR, &bmsr);
tg3_readphy(tp, MII_BMSR, &bmsr);
if (!(bmsr & BMSR_LSTATUS))
tg3_phy_reset(tp);
}
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
tg3_readphy(tp, MII_BMSR, &bmsr);
tg3_readphy(tp, MII_BMSR, &bmsr);
if (!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE))
bmsr = 0;
if (!(bmsr & BMSR_LSTATUS)) {
err = tg3_init_5401phy_dsp(tp);
if (err)
return err;
tg3_readphy(tp, MII_BMSR, &bmsr);
for (i = 0; i < 1000; i++) {
udelay(10);
tg3_readphy(tp, MII_BMSR, &bmsr);
if (bmsr & BMSR_LSTATUS) {
udelay(40);
break;
}
}
if ((tp->phy_id & PHY_ID_REV_MASK) == PHY_REV_BCM5401_B0 &&
!(bmsr & BMSR_LSTATUS) &&
tp->link_config.active_speed == SPEED_1000) {
err = tg3_phy_reset(tp);
if (!err)
err = tg3_init_5401phy_dsp(tp);
if (err)
return err;
}
}
} else if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) {
/* 5701 {A0,B0} CRC bug workaround */
tg3_writephy(tp, 0x15, 0x0a75);
tg3_writephy(tp, 0x1c, 0x8c68);
tg3_writephy(tp, 0x1c, 0x8d68);
tg3_writephy(tp, 0x1c, 0x8c68);
}
/* Clear pending interrupts... */
tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
tg3_readphy(tp, MII_TG3_ISTAT, &dummy);
tg3_writephy(tp, MII_TG3_IMASK, ~0);
if (tp->led_mode == led_mode_three_link)
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_LNK3_LED_MODE);
else
tg3_writephy(tp, MII_TG3_EXT_CTRL, 0);
current_link_up = 0;
tg3_readphy(tp, MII_BMSR, &bmsr);
tg3_readphy(tp, MII_BMSR, &bmsr);
if (bmsr & BMSR_LSTATUS) {
uint32_t aux_stat, bmcr;
tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
for (i = 0; i < 2000; i++) {
udelay(10);
tg3_readphy(tp, MII_TG3_AUX_STAT, &aux_stat);
if (aux_stat)
break;
}
tg3_aux_stat_to_speed_duplex(tp, aux_stat,
&tp->link_config.active_speed,
&tp->link_config.active_duplex);
tg3_readphy(tp, MII_BMCR, &bmcr);
tg3_readphy(tp, MII_BMCR, &bmcr);
if (bmcr & BMCR_ANENABLE) {
uint32_t gig_ctrl;
current_link_up = 1;
/* Force autoneg restart if we are exiting
* low power mode.
*/
tg3_readphy(tp, MII_TG3_CTRL, &gig_ctrl);
if (!(gig_ctrl & (MII_TG3_CTRL_ADV_1000_HALF |
MII_TG3_CTRL_ADV_1000_FULL))) {
current_link_up = 0;
}
} else {
current_link_up = 0;
}
}
if (current_link_up == 1 &&
(tp->link_config.active_duplex == DUPLEX_FULL)) {
uint32_t local_adv, remote_adv;
tg3_readphy(tp, MII_ADVERTISE, &local_adv);
local_adv &= (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
tg3_readphy(tp, MII_LPA, &remote_adv);
remote_adv &= (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
/* If we are not advertising full pause capability,
* something is wrong. Bring the link down and reconfigure.
*/
if (local_adv != ADVERTISE_PAUSE_CAP) {
current_link_up = 0;
} else {
tg3_setup_flow_control(tp, local_adv, remote_adv);
}
}
if (current_link_up == 0) {
uint32_t tmp;
tg3_phy_copper_begin(tp);
tg3_readphy(tp, MII_BMSR, &tmp);
tg3_readphy(tp, MII_BMSR, &tmp);
if (tmp & BMSR_LSTATUS)
current_link_up = 1;
}
tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK;
if (current_link_up == 1) {
if (tp->link_config.active_speed == SPEED_100 ||
tp->link_config.active_speed == SPEED_10)
tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
} else
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
if ((tp->led_mode == led_mode_link10) ||
(current_link_up == 1 &&
tp->link_config.active_speed == SPEED_10))
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
} else {
if (current_link_up == 1)
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
tw32(MAC_LED_CTRL, LED_CTRL_PHY_MODE_1);
}
/* ??? Without this setting Netgear GA302T PHY does not
* ??? send/receive packets...
* With this other PHYs cannot bring up the link
*/
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411 &&
tp->pci_chip_rev_id == CHIPREV_ID_5700_ALTIMA) {
tp->mi_mode |= MAC_MI_MODE_AUTO_POLL;
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
}
tw32_carefully(MAC_MODE, tp->mac_mode);
/* Link change polled. */
tw32_carefully(MAC_EVENT, 0);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 &&
current_link_up == 1 &&
tp->link_config.active_speed == SPEED_1000 &&
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ||
(tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED))) {
udelay(120);
tw32_carefully(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
tg3_write_mem(
NIC_SRAM_FIRMWARE_MBOX,
NIC_SRAM_FIRMWARE_MBOX_MAGIC2);
}
if (current_link_up != tp->carrier_ok) {
tp->carrier_ok = current_link_up;
tg3_link_report(tp);
}
return 0;
}
#else
#define tg3_setup_copper_phy(TP) (-EINVAL)
#endif /* SUPPORT_COPPER_PHY */
#if SUPPORT_FIBER_PHY
struct tg3_fiber_aneginfo {
int state;
#define ANEG_STATE_UNKNOWN 0
#define ANEG_STATE_AN_ENABLE 1
#define ANEG_STATE_RESTART_INIT 2
#define ANEG_STATE_RESTART 3
#define ANEG_STATE_DISABLE_LINK_OK 4
#define ANEG_STATE_ABILITY_DETECT_INIT 5
#define ANEG_STATE_ABILITY_DETECT 6
#define ANEG_STATE_ACK_DETECT_INIT 7
#define ANEG_STATE_ACK_DETECT 8
#define ANEG_STATE_COMPLETE_ACK_INIT 9
#define ANEG_STATE_COMPLETE_ACK 10
#define ANEG_STATE_IDLE_DETECT_INIT 11
#define ANEG_STATE_IDLE_DETECT 12
#define ANEG_STATE_LINK_OK 13
#define ANEG_STATE_NEXT_PAGE_WAIT_INIT 14
#define ANEG_STATE_NEXT_PAGE_WAIT 15
uint32_t flags;
#define MR_AN_ENABLE 0x00000001
#define MR_RESTART_AN 0x00000002
#define MR_AN_COMPLETE 0x00000004
#define MR_PAGE_RX 0x00000008
#define MR_NP_LOADED 0x00000010
#define MR_TOGGLE_TX 0x00000020
#define MR_LP_ADV_FULL_DUPLEX 0x00000040
#define MR_LP_ADV_HALF_DUPLEX 0x00000080
#define MR_LP_ADV_SYM_PAUSE 0x00000100
#define MR_LP_ADV_ASYM_PAUSE 0x00000200
#define MR_LP_ADV_REMOTE_FAULT1 0x00000400
#define MR_LP_ADV_REMOTE_FAULT2 0x00000800
#define MR_LP_ADV_NEXT_PAGE 0x00001000
#define MR_TOGGLE_RX 0x00002000
#define MR_NP_RX 0x00004000
#define MR_LINK_OK 0x80000000
unsigned long link_time, cur_time;
uint32_t ability_match_cfg;
int ability_match_count;
char ability_match, idle_match, ack_match;
uint32_t txconfig, rxconfig;
#define ANEG_CFG_NP 0x00000080
#define ANEG_CFG_ACK 0x00000040
#define ANEG_CFG_RF2 0x00000020
#define ANEG_CFG_RF1 0x00000010
#define ANEG_CFG_PS2 0x00000001
#define ANEG_CFG_PS1 0x00008000
#define ANEG_CFG_HD 0x00004000
#define ANEG_CFG_FD 0x00002000
#define ANEG_CFG_INVAL 0x00001f06
};
#define ANEG_OK 0
#define ANEG_DONE 1
#define ANEG_TIMER_ENAB 2
#define ANEG_FAILED -1
#define ANEG_STATE_SETTLE_TIME 10000
static int tg3_fiber_aneg_smachine(struct tg3 *tp,
struct tg3_fiber_aneginfo *ap)
{
unsigned long delta;
uint32_t rx_cfg_reg;
int ret;
if (ap->state == ANEG_STATE_UNKNOWN) {
ap->rxconfig = 0;
ap->link_time = 0;
ap->cur_time = 0;
ap->ability_match_cfg = 0;
ap->ability_match_count = 0;
ap->ability_match = 0;
ap->idle_match = 0;
ap->ack_match = 0;
}
ap->cur_time++;
if (tr32(MAC_STATUS) & MAC_STATUS_RCVD_CFG) {
rx_cfg_reg = tr32(MAC_RX_AUTO_NEG);
if (rx_cfg_reg != ap->ability_match_cfg) {
ap->ability_match_cfg = rx_cfg_reg;
ap->ability_match = 0;
ap->ability_match_count = 0;
} else {
if (++ap->ability_match_count > 1) {
ap->ability_match = 1;
ap->ability_match_cfg = rx_cfg_reg;
}
}
if (rx_cfg_reg & ANEG_CFG_ACK)
ap->ack_match = 1;
else
ap->ack_match = 0;
ap->idle_match = 0;
} else {
ap->idle_match = 1;
ap->ability_match_cfg = 0;
ap->ability_match_count = 0;
ap->ability_match = 0;
ap->ack_match = 0;
rx_cfg_reg = 0;
}
ap->rxconfig = rx_cfg_reg;
ret = ANEG_OK;
switch(ap->state) {
case ANEG_STATE_UNKNOWN:
if (ap->flags & (MR_AN_ENABLE | MR_RESTART_AN))
ap->state = ANEG_STATE_AN_ENABLE;
/* fallthru */
case ANEG_STATE_AN_ENABLE:
ap->flags &= ~(MR_AN_COMPLETE | MR_PAGE_RX);
if (ap->flags & MR_AN_ENABLE) {
ap->link_time = 0;
ap->cur_time = 0;
ap->ability_match_cfg = 0;
ap->ability_match_count = 0;
ap->ability_match = 0;
ap->idle_match = 0;
ap->ack_match = 0;
ap->state = ANEG_STATE_RESTART_INIT;
} else {
ap->state = ANEG_STATE_DISABLE_LINK_OK;
}
break;
case ANEG_STATE_RESTART_INIT:
ap->link_time = ap->cur_time;
ap->flags &= ~(MR_NP_LOADED);
ap->txconfig = 0;
tw32(MAC_TX_AUTO_NEG, 0);
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
tw32_carefully(MAC_MODE, tp->mac_mode);
ret = ANEG_TIMER_ENAB;
ap->state = ANEG_STATE_RESTART;
/* fallthru */
case ANEG_STATE_RESTART:
delta = ap->cur_time - ap->link_time;
if (delta > ANEG_STATE_SETTLE_TIME) {
ap->state = ANEG_STATE_ABILITY_DETECT_INIT;
} else {
ret = ANEG_TIMER_ENAB;
}
break;
case ANEG_STATE_DISABLE_LINK_OK:
ret = ANEG_DONE;
break;
case ANEG_STATE_ABILITY_DETECT_INIT:
ap->flags &= ~(MR_TOGGLE_TX);
ap->txconfig = (ANEG_CFG_FD | ANEG_CFG_PS1);
tw32(MAC_TX_AUTO_NEG, ap->txconfig);
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
tw32_carefully(MAC_MODE, tp->mac_mode);
ap->state = ANEG_STATE_ABILITY_DETECT;
break;
case ANEG_STATE_ABILITY_DETECT:
if (ap->ability_match != 0 && ap->rxconfig != 0) {
ap->state = ANEG_STATE_ACK_DETECT_INIT;
}
break;
case ANEG_STATE_ACK_DETECT_INIT:
ap->txconfig |= ANEG_CFG_ACK;
tw32(MAC_TX_AUTO_NEG, ap->txconfig);
tp->mac_mode |= MAC_MODE_SEND_CONFIGS;
tw32_carefully(MAC_MODE, tp->mac_mode);
ap->state = ANEG_STATE_ACK_DETECT;
/* fallthru */
case ANEG_STATE_ACK_DETECT:
if (ap->ack_match != 0) {
if ((ap->rxconfig & ~ANEG_CFG_ACK) ==
(ap->ability_match_cfg & ~ANEG_CFG_ACK)) {
ap->state = ANEG_STATE_COMPLETE_ACK_INIT;
} else {
ap->state = ANEG_STATE_AN_ENABLE;
}
} else if (ap->ability_match != 0 &&
ap->rxconfig == 0) {
ap->state = ANEG_STATE_AN_ENABLE;
}
break;
case ANEG_STATE_COMPLETE_ACK_INIT:
if (ap->rxconfig & ANEG_CFG_INVAL) {
ret = ANEG_FAILED;
break;
}
ap->flags &= ~(MR_LP_ADV_FULL_DUPLEX |
MR_LP_ADV_HALF_DUPLEX |
MR_LP_ADV_SYM_PAUSE |
MR_LP_ADV_ASYM_PAUSE |
MR_LP_ADV_REMOTE_FAULT1 |
MR_LP_ADV_REMOTE_FAULT2 |
MR_LP_ADV_NEXT_PAGE |
MR_TOGGLE_RX |
MR_NP_RX);
if (ap->rxconfig & ANEG_CFG_FD)
ap->flags |= MR_LP_ADV_FULL_DUPLEX;
if (ap->rxconfig & ANEG_CFG_HD)
ap->flags |= MR_LP_ADV_HALF_DUPLEX;
if (ap->rxconfig & ANEG_CFG_PS1)
ap->flags |= MR_LP_ADV_SYM_PAUSE;
if (ap->rxconfig & ANEG_CFG_PS2)
ap->flags |= MR_LP_ADV_ASYM_PAUSE;
if (ap->rxconfig & ANEG_CFG_RF1)
ap->flags |= MR_LP_ADV_REMOTE_FAULT1;
if (ap->rxconfig & ANEG_CFG_RF2)
ap->flags |= MR_LP_ADV_REMOTE_FAULT2;
if (ap->rxconfig & ANEG_CFG_NP)
ap->flags |= MR_LP_ADV_NEXT_PAGE;
ap->link_time = ap->cur_time;
ap->flags ^= (MR_TOGGLE_TX);
if (ap->rxconfig & 0x0008)
ap->flags |= MR_TOGGLE_RX;
if (ap->rxconfig & ANEG_CFG_NP)
ap->flags |= MR_NP_RX;
ap->flags |= MR_PAGE_RX;
ap->state = ANEG_STATE_COMPLETE_ACK;
ret = ANEG_TIMER_ENAB;
break;
case ANEG_STATE_COMPLETE_ACK:
if (ap->ability_match != 0 &&
ap->rxconfig == 0) {
ap->state = ANEG_STATE_AN_ENABLE;
break;
}
delta = ap->cur_time - ap->link_time;
if (delta > ANEG_STATE_SETTLE_TIME) {
if (!(ap->flags & (MR_LP_ADV_NEXT_PAGE))) {
ap->state = ANEG_STATE_IDLE_DETECT_INIT;
} else {
if ((ap->txconfig & ANEG_CFG_NP) == 0 &&
!(ap->flags & MR_NP_RX)) {
ap->state = ANEG_STATE_IDLE_DETECT_INIT;
} else {
ret = ANEG_FAILED;
}
}
}
break;
case ANEG_STATE_IDLE_DETECT_INIT:
ap->link_time = ap->cur_time;
tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
tw32_carefully(MAC_MODE, tp->mac_mode);
ap->state = ANEG_STATE_IDLE_DETECT;
ret = ANEG_TIMER_ENAB;
break;
case ANEG_STATE_IDLE_DETECT:
if (ap->ability_match != 0 &&
ap->rxconfig == 0) {
ap->state = ANEG_STATE_AN_ENABLE;
break;
}
delta = ap->cur_time - ap->link_time;
if (delta > ANEG_STATE_SETTLE_TIME) {
/* XXX another gem from the Broadcom driver :( */
ap->state = ANEG_STATE_LINK_OK;
}
break;
case ANEG_STATE_LINK_OK:
ap->flags |= (MR_AN_COMPLETE | MR_LINK_OK);
ret = ANEG_DONE;
break;
case ANEG_STATE_NEXT_PAGE_WAIT_INIT:
/* ??? unimplemented */
break;
case ANEG_STATE_NEXT_PAGE_WAIT:
/* ??? unimplemented */
break;
default:
ret = ANEG_FAILED;
break;
};
return ret;
}
static int tg3_setup_fiber_phy(struct tg3 *tp)
{
uint32_t orig_pause_cfg;
uint16_t orig_active_speed;
uint8_t orig_active_duplex;
int current_link_up;
int i;
orig_pause_cfg =
(tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
TG3_FLAG_TX_PAUSE));
orig_active_speed = tp->link_config.active_speed;
orig_active_duplex = tp->link_config.active_duplex;
tp->mac_mode &= ~(MAC_MODE_PORT_MODE_MASK | MAC_MODE_HALF_DUPLEX);
tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
tw32_carefully(MAC_MODE, tp->mac_mode);
/* Reset when initting first time or we have a link. */
if (!(tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) ||
(tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED)) {
/* Set PLL lock range. */
tg3_writephy(tp, 0x16, 0x8007);
/* SW reset */
tg3_writephy(tp, MII_BMCR, BMCR_RESET);
/* Wait for reset to complete. */
mdelay(5);
/* Config mode; select PMA/Ch 1 regs. */
tg3_writephy(tp, 0x10, 0x8411);
/* Enable auto-lock and comdet, select txclk for tx. */
tg3_writephy(tp, 0x11, 0x0a10);
tg3_writephy(tp, 0x18, 0x00a0);
tg3_writephy(tp, 0x16, 0x41ff);
/* Assert and deassert POR. */
tg3_writephy(tp, 0x13, 0x0400);
udelay(40);
tg3_writephy(tp, 0x13, 0x0000);
tg3_writephy(tp, 0x11, 0x0a50);
udelay(40);
tg3_writephy(tp, 0x11, 0x0a10);
/* Wait for signal to stabilize */
mdelay(150);
/* Deselect the channel register so we can read the PHYID
* later.
*/
tg3_writephy(tp, 0x10, 0x8011);
}
/* Disable link change interrupt. */
tw32_carefully(MAC_EVENT, 0);
current_link_up = 0;
if (tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) {
if (!(tp->tg3_flags & TG3_FLAG_GOT_SERDES_FLOWCTL)) {
struct tg3_fiber_aneginfo aninfo;
int status = ANEG_FAILED;
unsigned int tick;
uint32_t tmp;
memset(&aninfo, 0, sizeof(aninfo));
aninfo.flags |= (MR_AN_ENABLE);
tw32(MAC_TX_AUTO_NEG, 0);
tmp = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
tw32_carefully(MAC_MODE, tmp | MAC_MODE_PORT_MODE_GMII);
tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_SEND_CONFIGS);
aninfo.state = ANEG_STATE_UNKNOWN;
aninfo.cur_time = 0;
tick = 0;
while (++tick < 195000) {
status = tg3_fiber_aneg_smachine(tp, &aninfo);
if (status == ANEG_DONE ||
status == ANEG_FAILED)
break;
udelay(1);
}
tp->mac_mode &= ~MAC_MODE_SEND_CONFIGS;
tw32_carefully(MAC_MODE, tp->mac_mode);
if (status == ANEG_DONE &&
(aninfo.flags &
(MR_AN_COMPLETE | MR_LINK_OK |
MR_LP_ADV_FULL_DUPLEX))) {
uint32_t local_adv, remote_adv;
local_adv = ADVERTISE_PAUSE_CAP;
remote_adv = 0;
if (aninfo.flags & MR_LP_ADV_SYM_PAUSE)
remote_adv |= LPA_PAUSE_CAP;
if (aninfo.flags & MR_LP_ADV_ASYM_PAUSE)
remote_adv |= LPA_PAUSE_ASYM;
tg3_setup_flow_control(tp, local_adv, remote_adv);
tp->tg3_flags |=
TG3_FLAG_GOT_SERDES_FLOWCTL;
current_link_up = 1;
}
for (i = 0; i < 60; i++) {
udelay(20);
tw32_carefully(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
if ((tr32(MAC_STATUS) &
(MAC_STATUS_SYNC_CHANGED |
MAC_STATUS_CFG_CHANGED)) == 0)
break;
}
if (current_link_up == 0 &&
(tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED)) {
current_link_up = 1;
}
} else {
/* Forcing 1000FD link up. */
current_link_up = 1;
}
}
tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
tw32_carefully(MAC_MODE, tp->mac_mode);
tp->hw_status->status =
(SD_STATUS_UPDATED |
(tp->hw_status->status & ~SD_STATUS_LINK_CHG));
for (i = 0; i < 100; i++) {
udelay(20);
tw32_carefully(MAC_STATUS,
(MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED));
if ((tr32(MAC_STATUS) &
(MAC_STATUS_SYNC_CHANGED |
MAC_STATUS_CFG_CHANGED)) == 0)
break;
}
if ((tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) == 0)
current_link_up = 0;
if (current_link_up == 1) {
tp->link_config.active_speed = SPEED_1000;
tp->link_config.active_duplex = DUPLEX_FULL;
} else {
tp->link_config.active_speed = SPEED_INVALID;
tp->link_config.active_duplex = DUPLEX_INVALID;
}
if (current_link_up != tp->carrier_ok) {
tp->carrier_ok = current_link_up;
tg3_link_report(tp);
} else {
uint32_t now_pause_cfg =
tp->tg3_flags & (TG3_FLAG_RX_PAUSE |
TG3_FLAG_TX_PAUSE);
if (orig_pause_cfg != now_pause_cfg ||
orig_active_speed != tp->link_config.active_speed ||
orig_active_duplex != tp->link_config.active_duplex)
tg3_link_report(tp);
}
if ((tr32(MAC_STATUS) & MAC_STATUS_PCS_SYNCED) == 0) {
tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_LINK_POLARITY);
if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) {
tw32_carefully(MAC_MODE, tp->mac_mode);
}
}
return 0;
}
#else
#define tg3_setup_fiber_phy(TP) (-EINVAL)
#endif /* SUPPORT_FIBER_PHY */
static int tg3_setup_phy(struct tg3 *tp)
{
int err;
if (tp->phy_id == PHY_ID_SERDES) {
err = tg3_setup_fiber_phy(tp);
} else {
err = tg3_setup_copper_phy(tp);
}
if (tp->link_config.active_speed == SPEED_1000 &&
tp->link_config.active_duplex == DUPLEX_HALF)
tw32(MAC_TX_LENGTHS,
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
else
tw32(MAC_TX_LENGTHS,
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
return err;
}
#define MAX_WAIT_CNT 1000
/* To stop a block, clear the enable bit and poll till it
* clears.
*/
static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, uint32_t enable_bit)
{
unsigned int i;
uint32_t val;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
switch(ofs) {
case RCVLSC_MODE:
case DMAC_MODE:
case MBFREE_MODE:
case BUFMGR_MODE:
case MEMARB_MODE:
/* We can't enable/disable these bits of the
* 5705, just say success.
*/
return 0;
default:
break;
}
}
val = tr32(ofs);
val &= ~enable_bit;
tw32(ofs, val);
tr32(ofs);
for (i = 0; i < MAX_WAIT_CNT; i++) {
udelay(100);
val = tr32(ofs);
if ((val & enable_bit) == 0)
break;
}
if (i == MAX_WAIT_CNT) {
printf("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
return 0;
}
static int tg3_abort_hw(struct tg3 *tp)
{
int i, err;
tg3_disable_ints(tp);
tp->rx_mode &= ~RX_MODE_ENABLE;
tw32_carefully(MAC_RX_MODE, tp->rx_mode);
err = tg3_stop_block(tp, RCVBDI_MODE, RCVBDI_MODE_ENABLE);
err |= tg3_stop_block(tp, RCVLPC_MODE, RCVLPC_MODE_ENABLE);
err |= tg3_stop_block(tp, RCVLSC_MODE, RCVLSC_MODE_ENABLE);
err |= tg3_stop_block(tp, RCVDBDI_MODE, RCVDBDI_MODE_ENABLE);
err |= tg3_stop_block(tp, RCVDCC_MODE, RCVDCC_MODE_ENABLE);
err |= tg3_stop_block(tp, RCVCC_MODE, RCVCC_MODE_ENABLE);
err |= tg3_stop_block(tp, SNDBDS_MODE, SNDBDS_MODE_ENABLE);
err |= tg3_stop_block(tp, SNDBDI_MODE, SNDBDI_MODE_ENABLE);
err |= tg3_stop_block(tp, SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
err |= tg3_stop_block(tp, RDMAC_MODE, RDMAC_MODE_ENABLE);
err |= tg3_stop_block(tp, SNDDATAC_MODE, SNDDATAC_MODE_ENABLE);
err |= tg3_stop_block(tp, SNDBDC_MODE, SNDBDC_MODE_ENABLE);
if (err)
goto out;
tp->mac_mode &= ~MAC_MODE_TDE_ENABLE;
tw32_carefully(MAC_MODE, tp->mac_mode);
tp->tx_mode &= ~TX_MODE_ENABLE;
tw32_carefully(MAC_TX_MODE, tp->tx_mode);
for (i = 0; i < MAX_WAIT_CNT; i++) {
udelay(100);
if (!(tr32(MAC_TX_MODE) & TX_MODE_ENABLE))
break;
}
if (i >= MAX_WAIT_CNT) {
printf("tg3_abort_hw timed out TX_MODE_ENABLE will not clear MAC_TX_MODE=%x\n",
tr32(MAC_TX_MODE));
return -ENODEV;
}
err = tg3_stop_block(tp, HOSTCC_MODE, HOSTCC_MODE_ENABLE);
err |= tg3_stop_block(tp, WDMAC_MODE, WDMAC_MODE_ENABLE);
err |= tg3_stop_block(tp, MBFREE_MODE, MBFREE_MODE_ENABLE);
tw32(FTQ_RESET, 0xffffffff);
tw32(FTQ_RESET, 0x00000000);
err |= tg3_stop_block(tp, BUFMGR_MODE, BUFMGR_MODE_ENABLE);
err |= tg3_stop_block(tp, MEMARB_MODE, MEMARB_MODE_ENABLE);
if (err)
goto out;
memset(tp->hw_status, 0, TG3_HW_STATUS_SIZE);
out:
return err;
}
static void tg3_chip_reset(struct tg3 *tp)
{
uint32_t val;
if (!(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
/* Force NVRAM to settle.
* This deals with a chip bug which can result in EEPROM
* corruption.
*/
if (tp->tg3_flags & TG3_FLAG_NVRAM) {
int i;
tw32(NVRAM_SWARB, SWARB_REQ_SET1);
for (i = 0; i < 100000; i++) {
if (tr32(NVRAM_SWARB) & SWARB_GNT1)
break;
udelay(10);
}
}
}
/* In Etherboot we don't need to worry about the 5701
* REG_WRITE_BUG because we do all register writes indirectly.
*/
// Alf: here patched
/* do the reset */
val = GRC_MISC_CFG_CORECLK_RESET;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
|| (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750)) {
val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
}
// Alf : Please VALIDATE THIS.
// It is necessary in my case (5751) to prevent a reboot, but
// I have no idea about a side effect on any other version.
// It appears to be what's done in tigon3.c from Broadcom
if (tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
tw32(GRC_MISC_CFG, 0x20000000) ;
val |= 0x20000000 ;
}
tw32(GRC_MISC_CFG, val);
/* Flush PCI posted writes. The normal MMIO registers
* are inaccessible at this time so this is the only
* way to make this reliably. I tried to use indirect
* register read/write but this upset some 5701 variants.
*/
pci_read_config_dword(tp->pdev, PCI_COMMAND, &val);
udelay(120);
/* Re-enable indirect register accesses. */
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);
/* Set MAX PCI retry to zero. */
val = (PCISTATE_ROM_ENABLE | PCISTATE_ROM_RETRY_ENABLE);
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
(tp->tg3_flags & TG3_FLAG_PCIX_MODE))
val |= PCISTATE_RETRY_SAME_DMA;
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, val);
pci_restore_state(tp->pdev, tp->pci_cfg_state);
/* Make sure PCI-X relaxed ordering bit is clear. */
pci_read_config_dword(tp->pdev, TG3PCI_X_CAPS, &val);
val &= ~PCIX_CAPS_RELAXED_ORDERING;
pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
if (((tp->nic_sram_data_cfg & NIC_SRAM_DATA_CFG_MINI_PCI) != 0) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
tp->pci_clock_ctrl |=
(CLOCK_CTRL_FORCE_CLKRUN | CLOCK_CTRL_CLKRUN_OENABLE);
tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
}
tw32(TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl);
}
static void tg3_stop_fw(struct tg3 *tp)
{
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
uint32_t val;
int i;
tg3_write_mem(NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
val = tr32(GRC_RX_CPU_EVENT);
val |= (1 << 14);
tw32(GRC_RX_CPU_EVENT, val);
/* Wait for RX cpu to ACK the event. */
for (i = 0; i < 100; i++) {
if (!(tr32(GRC_RX_CPU_EVENT) & (1 << 14)))
break;
udelay(1);
}
}
}
static int tg3_restart_fw(struct tg3 *tp, uint32_t state)
{
uint32_t val;
int i;
tg3_write_mem(NIC_SRAM_FIRMWARE_MBOX,
NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
/* Wait for firmware initialization to complete. */
for (i = 0; i < 100000; i++) {
tg3_read_mem(NIC_SRAM_FIRMWARE_MBOX, &val);
if (val == (uint32_t) ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
break;
udelay(10);
}
if (i >= 100000 &&
!(tp->tg3_flags2 & TG3_FLG2_SUN_5704)) {
printf("Firmware will not restart magic=%x\n",
val);
return -ENODEV;
}
if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
state = DRV_STATE_SUSPEND;
}
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5750_A0)) {
// Enable PCIE bug fix
tg3_read_mem(0x7c00, &val);
tg3_write_mem(0x7c00, val | 0x02000000);
}
tg3_write_mem(NIC_SRAM_FW_DRV_STATE_MBOX, state);
return 0;
}
static int tg3_halt(struct tg3 *tp)
{
tg3_stop_fw(tp);
tg3_abort_hw(tp);
tg3_chip_reset(tp);
return tg3_restart_fw(tp, DRV_STATE_UNLOAD);
}
static void __tg3_set_mac_addr(struct tg3 *tp)
{
uint32_t addr_high, addr_low;
int i;
addr_high = ((tp->nic->node_addr[0] << 8) |
tp->nic->node_addr[1]);
addr_low = ((tp->nic->node_addr[2] << 24) |
(tp->nic->node_addr[3] << 16) |
(tp->nic->node_addr[4] << 8) |
(tp->nic->node_addr[5] << 0));
for (i = 0; i < 4; i++) {
tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) &&
(GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705)) {
for(i = 0; i < 12; i++) {
tw32(MAC_EXTADDR_0_HIGH + (i * 8), addr_high);
tw32(MAC_EXTADDR_0_LOW + (i * 8), addr_low);
}
}
addr_high = (tp->nic->node_addr[0] +
tp->nic->node_addr[1] +
tp->nic->node_addr[2] +
tp->nic->node_addr[3] +
tp->nic->node_addr[4] +
tp->nic->node_addr[5]) &
TX_BACKOFF_SEED_MASK;
tw32(MAC_TX_BACKOFF_SEED, addr_high);
}
static void tg3_set_bdinfo(struct tg3 *tp, uint32_t bdinfo_addr,
dma_addr_t mapping, uint32_t maxlen_flags,
uint32_t nic_addr)
{
tg3_write_mem((bdinfo_addr +
TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH),
((uint64_t) mapping >> 32));
tg3_write_mem((bdinfo_addr +
TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW),
((uint64_t) mapping & 0xffffffff));
tg3_write_mem((bdinfo_addr +
TG3_BDINFO_MAXLEN_FLAGS),
maxlen_flags);
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
tg3_write_mem((bdinfo_addr + TG3_BDINFO_NIC_ADDR), nic_addr);
}
}
static void tg3_init_rings(struct tg3 *tp)
{
unsigned i;
/* Zero out the tg3 variables */
memset(&tg3_bss, 0, sizeof(tg3_bss));
tp->rx_std = &tg3_bss.rx_std[0];
tp->rx_rcb = &tg3_bss.rx_rcb[0];
tp->tx_ring = &tg3_bss.tx_ring[0];
tp->hw_status = &tg3_bss.hw_status;
tp->hw_stats = &tg3_bss.hw_stats;
tp->mac_mode = 0;
/* Initialize tx/rx rings for packet processing.
*
* The chip has been shut down and the driver detached from
* the networking, so no interrupts or new tx packets will
* end up in the driver.
*/
/* Initialize invariants of the rings, we only set this
* stuff once. This works because the card does not
* write into the rx buffer posting rings.
*/
for (i = 0; i < TG3_RX_RING_SIZE; i++) {
struct tg3_rx_buffer_desc *rxd;
rxd = &tp->rx_std[i];
rxd->idx_len = (RX_PKT_BUF_SZ - 2 - 64) << RXD_LEN_SHIFT;
rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
rxd->opaque = (RXD_OPAQUE_RING_STD | (i << RXD_OPAQUE_INDEX_SHIFT));
/* Note where the receive buffer for the ring is placed */
rxd->addr_hi = 0;
rxd->addr_lo = virt_to_bus(
&tg3_bss.rx_bufs[i%TG3_DEF_RX_RING_PENDING][2]);
}
}
#define TG3_WRITE_SETTINGS(TABLE) \
do { \
const uint32_t *_table, *_end; \
_table = TABLE; \
_end = _table + sizeof(TABLE)/sizeof(TABLE[0]); \
for(; _table < _end; _table += 2) { \
tw32(_table[0], _table[1]); \
} \
} while(0)
/* initialize/reset the tg3 */
static int tg3_setup_hw(struct tg3 *tp)
{
uint32_t val, rdmac_mode;
int i, err, limit;
/* Simply don't support setups with extremly buggy firmware in etherboot */
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
printf("Error 5701_A0 firmware bug detected\n");
return -EINVAL;
}
tg3_disable_ints(tp);
/* Originally this was all in tg3_init_hw */
/* Force the chip into D0. */
tg3_set_power_state_0(tp);
tg3_switch_clocks(tp);
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
// This should go somewhere else
#define T3_PCIE_CAPABILITY_ID_REG 0xD0
#define T3_PCIE_CAPABILITY_ID 0x10
#define T3_PCIE_CAPABILITY_REG 0xD2
/* Originally this was all in tg3_reset_hw */
tg3_stop_fw(tp);
/* No need to call tg3_abort_hw here, it is called before tg3_setup_hw. */
tg3_chip_reset(tp);
tw32(GRC_MODE, tp->grc_mode); /* Redundant? */
err = tg3_restart_fw(tp, DRV_STATE_START);
if (err)
return err;
if (tp->phy_id == PHY_ID_SERDES) {
tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
}
tw32_carefully(MAC_MODE, tp->mac_mode);
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision.
* Alf: Except 5750 ! (which reboots)
*/
if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS))
tp->pci_clock_ctrl |= CLOCK_CTRL_DELAY_PCI_GRANT;
tw32_carefully(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0 &&
(tp->tg3_flags & TG3_FLAG_PCIX_MODE)) {
val = tr32(TG3PCI_PCISTATE);
val |= PCISTATE_RETRY_SAME_DMA;
tw32(TG3PCI_PCISTATE, val);
}
/* Descriptor ring init may make accesses to the
* NIC SRAM area to setup the TX descriptors, so we
* can only do this after the hardware has been
* successfully reset.
*/
tg3_init_rings(tp);
/* Clear statistics/status block in chip */
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
for (i = NIC_SRAM_STATS_BLK;
i < NIC_SRAM_STATUS_BLK + TG3_HW_STATUS_SIZE;
i += sizeof(uint32_t)) {
tg3_write_mem(i, 0);
udelay(40);
}
}
/* This value is determined during the probe time DMA
* engine test, tg3_setup_dma.
*/
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
tp->grc_mode &= ~(GRC_MODE_HOST_SENDBDS |
GRC_MODE_4X_NIC_SEND_RINGS |
GRC_MODE_NO_TX_PHDR_CSUM |
GRC_MODE_NO_RX_PHDR_CSUM);
tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
tw32(GRC_MODE,
tp->grc_mode |
(GRC_MODE_IRQ_ON_MAC_ATTN | GRC_MODE_HOST_STACKUP));
/* Setup the timer prescalar register. Clock is always 66Mhz. */
tw32(GRC_MISC_CFG,
(65 << GRC_MISC_CFG_PRESCALAR_SHIFT));
/* Initialize MBUF/DESC pool. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
tw32(BUFMGR_MB_POOL_ADDR, NIC_SRAM_MBUF_POOL_BASE);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE64);
else
tw32(BUFMGR_MB_POOL_SIZE, NIC_SRAM_MBUF_POOL_SIZE96);
tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
}
if (!(tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE)) {
tw32(BUFMGR_MB_RDMA_LOW_WATER,
tp->bufmgr_config.mbuf_read_dma_low_water);
tw32(BUFMGR_MB_MACRX_LOW_WATER,
tp->bufmgr_config.mbuf_mac_rx_low_water);
tw32(BUFMGR_MB_HIGH_WATER,
tp->bufmgr_config.mbuf_high_water);
} else {
tw32(BUFMGR_MB_RDMA_LOW_WATER,
tp->bufmgr_config.mbuf_read_dma_low_water_jumbo);
tw32(BUFMGR_MB_MACRX_LOW_WATER,
tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo);
tw32(BUFMGR_MB_HIGH_WATER,
tp->bufmgr_config.mbuf_high_water_jumbo);
}
tw32(BUFMGR_DMA_LOW_WATER,
tp->bufmgr_config.dma_low_water);
tw32(BUFMGR_DMA_HIGH_WATER,
tp->bufmgr_config.dma_high_water);
tw32(BUFMGR_MODE, BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
for (i = 0; i < 2000; i++) {
if (tr32(BUFMGR_MODE) & BUFMGR_MODE_ENABLE)
break;
udelay(10);
}
if (i >= 2000) {
printf("tg3_setup_hw cannot enable BUFMGR\n");
return -ENODEV;
}
tw32(FTQ_RESET, 0xffffffff);
tw32(FTQ_RESET, 0x00000000);
for (i = 0; i < 2000; i++) {
if (tr32(FTQ_RESET) == 0x00000000)
break;
udelay(10);
}
if (i >= 2000) {
printf("tg3_setup_hw cannot reset FTQ\n");
return -ENODEV;
}
/* Initialize TG3_BDINFO's at:
* RCVDBDI_STD_BD: standard eth size rx ring
* RCVDBDI_JUMBO_BD: jumbo frame rx ring
* RCVDBDI_MINI_BD: small frame rx ring (??? does not work)
*
* like so:
* TG3_BDINFO_HOST_ADDR: high/low parts of DMA address of ring
* TG3_BDINFO_MAXLEN_FLAGS: (rx max buffer size << 16) |
* ring attribute flags
* TG3_BDINFO_NIC_ADDR: location of descriptors in nic SRAM
*
* Standard receive ring @ NIC_SRAM_RX_BUFFER_DESC, 512 entries.
* Jumbo receive ring @ NIC_SRAM_RX_JUMBO_BUFFER_DESC, 256 entries.
*
* ??? No space allocated for mini receive ring? :(
*
* The size of each ring is fixed in the firmware, but the location is
* configurable.
*/
{
static const uint32_t table_all[] = {
/* Setup replenish thresholds. */
RCVBDI_STD_THRESH, TG3_DEF_RX_RING_PENDING / 8,
/* Etherboot lives below 4GB */
RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR, NIC_SRAM_RX_BUFFER_DESC,
};
static const uint32_t table_not_5705[] = {
/* Buffer maximum length */
RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, RX_STD_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT,
/* Disable the mini frame rx ring */
RCVDBDI_MINI_BD + TG3_BDINFO_MAXLEN_FLAGS, BDINFO_FLAGS_DISABLED,
/* Disable the jumbo frame rx ring */
RCVBDI_JUMBO_THRESH, 0,
RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS, BDINFO_FLAGS_DISABLED,
};
TG3_WRITE_SETTINGS(table_all);
tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
virt_to_bus(tp->rx_std));
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS,
RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT);
} else {
TG3_WRITE_SETTINGS(table_not_5705);
}
}
/* There is only one send ring on 5705, no need to explicitly
* disable the others.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
/* Clear out send RCB ring in SRAM. */
for (i = NIC_SRAM_SEND_RCB; i < NIC_SRAM_RCV_RET_RCB; i += TG3_BDINFO_SIZE)
tg3_write_mem(i + TG3_BDINFO_MAXLEN_FLAGS, BDINFO_FLAGS_DISABLED);
}
tp->tx_prod = 0;
tw32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
tw32_mailbox2(MAILBOX_SNDNIC_PROD_IDX_0 + TG3_64BIT_REG_LOW, 0);
tg3_set_bdinfo(tp,
NIC_SRAM_SEND_RCB,
virt_to_bus(tp->tx_ring),
(TG3_TX_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT),
NIC_SRAM_TX_BUFFER_DESC);
/* There is only one receive return ring on 5705, no need to explicitly
* disable the others.
*/
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
for (i = NIC_SRAM_RCV_RET_RCB; i < NIC_SRAM_STATS_BLK; i += TG3_BDINFO_SIZE) {
tg3_write_mem(i + TG3_BDINFO_MAXLEN_FLAGS,
BDINFO_FLAGS_DISABLED);
}
}
tp->rx_rcb_ptr = 0;
tw32_mailbox2(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, 0);
tg3_set_bdinfo(tp,
NIC_SRAM_RCV_RET_RCB,
virt_to_bus(tp->rx_rcb),
(TG3_RX_RCB_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT),
0);
tp->rx_std_ptr = TG3_DEF_RX_RING_PENDING;
tw32_mailbox2(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
tp->rx_std_ptr);
tw32_mailbox2(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW, 0);
/* Initialize MAC address and backoff seed. */
__tg3_set_mac_addr(tp);
/* Calculate RDMAC_MODE setting early, we need it to determine
* the RCVLPC_STATE_ENABLE mask.
*/
rdmac_mode = (RDMAC_MODE_ENABLE | RDMAC_MODE_TGTABORT_ENAB |
RDMAC_MODE_MSTABORT_ENAB | RDMAC_MODE_PARITYERR_ENAB |
RDMAC_MODE_ADDROFLOW_ENAB | RDMAC_MODE_FIFOOFLOW_ENAB |
RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
RDMAC_MODE_LNGREAD_ENAB);
if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
rdmac_mode |= RDMAC_MODE_SPLIT_ENABLE;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
if (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
if (!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) &&
!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
}
}
}
/* Setup host coalescing engine. */
tw32(HOSTCC_MODE, 0);
for (i = 0; i < 2000; i++) {
if (!(tr32(HOSTCC_MODE) & HOSTCC_MODE_ENABLE))
break;
udelay(10);
}
tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
tw32_carefully(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
tp->grc_local_ctrl = GRC_LCLCTRL_INT_ON_ATTN | GRC_LCLCTRL_AUTO_SEEPROM;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700)
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
tw32_carefully(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
tr32(MAILBOX_INTERRUPT_0);
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
tw32_carefully(DMAC_MODE, DMAC_MODE_ENABLE);
}
val = ( WDMAC_MODE_ENABLE | WDMAC_MODE_TGTABORT_ENAB |
WDMAC_MODE_MSTABORT_ENAB | WDMAC_MODE_PARITYERR_ENAB |
WDMAC_MODE_ADDROFLOW_ENAB | WDMAC_MODE_FIFOOFLOW_ENAB |
WDMAC_MODE_FIFOURUN_ENAB | WDMAC_MODE_FIFOOREAD_ENAB |
WDMAC_MODE_LNGREAD_ENAB);
if ((GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) &&
((tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH) != 0) &&
!(tp->tg3_flags2 & TG3_FLG2_IS_5788)) {
val |= WDMAC_MODE_RX_ACCEL;
}
tw32_carefully(WDMAC_MODE, val);
if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) != 0) {
val = tr32(TG3PCI_X_CAPS);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
val &= PCIX_CAPS_BURST_MASK;
val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);
} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
val &= ~(PCIX_CAPS_SPLIT_MASK | PCIX_CAPS_BURST_MASK);
val |= (PCIX_CAPS_MAX_BURST_CPIOB << PCIX_CAPS_BURST_SHIFT);
if (tp->tg3_flags & TG3_FLAG_SPLIT_MODE)
val |= (tp->split_mode_max_reqs <<
PCIX_CAPS_SPLIT_SHIFT);
}
tw32(TG3PCI_X_CAPS, val);
}
tw32_carefully(RDMAC_MODE, rdmac_mode);
{
static const uint32_t table_all[] = {
/* MTU + ethernet header + FCS + optional VLAN tag */
MAC_RX_MTU_SIZE, ETH_MAX_MTU + ETH_HLEN + 8,
/* The slot time is changed by tg3_setup_phy if we
* run at gigabit with half duplex.
*/
MAC_TX_LENGTHS,
(2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT),
/* Receive rules. */
MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS,
RCVLPC_CONFIG, 0x0181,
/* Receive/send statistics. */
RCVLPC_STATS_ENABLE, 0xffffff,
RCVLPC_STATSCTRL, RCVLPC_STATSCTRL_ENABLE,
SNDDATAI_STATSENAB, 0xffffff,
SNDDATAI_STATSCTRL, (SNDDATAI_SCTRL_ENABLE |SNDDATAI_SCTRL_FASTUPD),
/* Host coalescing engine */
HOSTCC_RXCOL_TICKS, 0,
HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS,
HOSTCC_RXMAX_FRAMES, 1,
HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES,
HOSTCC_RXCOAL_MAXF_INT, 1,
HOSTCC_TXCOAL_MAXF_INT, 0,
/* Status/statistics block address. */
/* Etherboot lives below 4GB, so HIGH == 0 */
HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
/* No need to enable 32byte coalesce mode. */
HOSTCC_MODE, HOSTCC_MODE_ENABLE | 0,
RCVCC_MODE, RCVCC_MODE_ENABLE | RCVCC_MODE_ATTN_ENABLE,
RCVLPC_MODE, RCVLPC_MODE_ENABLE,
RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE,
SNDDATAC_MODE, SNDDATAC_MODE_ENABLE,
SNDBDC_MODE, SNDBDC_MODE_ENABLE | SNDBDC_MODE_ATTN_ENABLE,
RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB,
RCVDBDI_MODE, RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ,
SNDDATAI_MODE, SNDDATAI_MODE_ENABLE,
SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE,
SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE,
/* Accept all multicast frames. */
MAC_HASH_REG_0, 0xffffffff,
MAC_HASH_REG_1, 0xffffffff,
MAC_HASH_REG_2, 0xffffffff,
MAC_HASH_REG_3, 0xffffffff,
};
static const uint32_t table_not_5705[] = {
/* Host coalescing engine */
HOSTCC_RXCOAL_TICK_INT, 0,
HOSTCC_TXCOAL_TICK_INT, 0,
/* Status/statistics block address. */
/* Etherboot lives below 4GB, so HIGH == 0 */
HOSTCC_STAT_COAL_TICKS, DEFAULT_STAT_COAL_TICKS,
HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, 0,
HOSTCC_STATS_BLK_NIC_ADDR, NIC_SRAM_STATS_BLK,
HOSTCC_STATUS_BLK_NIC_ADDR, NIC_SRAM_STATUS_BLK,
RCVLSC_MODE, RCVLSC_MODE_ENABLE | RCVLSC_MODE_ATTN_ENABLE,
MBFREE_MODE, MBFREE_MODE_ENABLE,
};
TG3_WRITE_SETTINGS(table_all);
tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
virt_to_bus(tp->hw_stats));
tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW,
virt_to_bus(tp->hw_status));
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705) {
TG3_WRITE_SETTINGS(table_not_5705);
}
}
tp->tx_mode = TX_MODE_ENABLE;
tw32_carefully(MAC_TX_MODE, tp->tx_mode);
tp->rx_mode = RX_MODE_ENABLE;
tw32_carefully(MAC_RX_MODE, tp->rx_mode);
tp->mi_mode = MAC_MI_MODE_BASE;
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
tw32(MAC_LED_CTRL, 0);
tw32(MAC_MI_STAT, MAC_MI_STAT_LNKSTAT_ATTN_ENAB);
if (tp->phy_id == PHY_ID_SERDES) {
tw32_carefully(MAC_RX_MODE, RX_MODE_RESET);
}
tp->rx_mode |= RX_MODE_KEEP_VLAN_TAG; /* drop tagged vlan packets */
tw32_carefully(MAC_RX_MODE, tp->rx_mode);
if (tp->pci_chip_rev_id == CHIPREV_ID_5703_A1)
tw32(MAC_SERDES_CFG, 0x616000);
/* Prevent chip from dropping frames when flow control
* is enabled.
*/
tw32(MAC_LOW_WMARK_MAX_RX_FRAME, 2);
tr32(MAC_LOW_WMARK_MAX_RX_FRAME);
err = tg3_setup_phy(tp);
/* Ignore CRC stats */
/* Initialize receive rules. */
tw32(MAC_RCV_RULE_0, 0xc2000000 & RCV_RULE_DISABLE_MASK);
tw32(MAC_RCV_VALUE_0, 0xffffffff & RCV_RULE_DISABLE_MASK);
tw32(MAC_RCV_RULE_1, 0x86000004 & RCV_RULE_DISABLE_MASK);
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
|| (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750))
limit = 8;
else
limit = 16;
if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF)
limit -= 4;
switch (limit) {
case 16: tw32(MAC_RCV_RULE_15, 0); tw32(MAC_RCV_VALUE_15, 0);
case 15: tw32(MAC_RCV_RULE_14, 0); tw32(MAC_RCV_VALUE_14, 0);
case 14: tw32(MAC_RCV_RULE_13, 0); tw32(MAC_RCV_VALUE_13, 0);
case 13: tw32(MAC_RCV_RULE_12, 0); tw32(MAC_RCV_VALUE_12, 0);
case 12: tw32(MAC_RCV_RULE_11, 0); tw32(MAC_RCV_VALUE_11, 0);
case 11: tw32(MAC_RCV_RULE_10, 0); tw32(MAC_RCV_VALUE_10, 0);
case 10: tw32(MAC_RCV_RULE_9, 0); tw32(MAC_RCV_VALUE_9, 0);
case 9: tw32(MAC_RCV_RULE_8, 0); tw32(MAC_RCV_VALUE_8, 0);
case 8: tw32(MAC_RCV_RULE_7, 0); tw32(MAC_RCV_VALUE_7, 0);
case 7: tw32(MAC_RCV_RULE_6, 0); tw32(MAC_RCV_VALUE_6, 0);
case 6: tw32(MAC_RCV_RULE_5, 0); tw32(MAC_RCV_VALUE_5, 0);
case 5: tw32(MAC_RCV_RULE_4, 0); tw32(MAC_RCV_VALUE_4, 0);
case 4: /* tw32(MAC_RCV_RULE_3, 0); tw32(MAC_RCV_VALUE_3, 0); */
case 3: /* tw32(MAC_RCV_RULE_2, 0); tw32(MAC_RCV_VALUE_2, 0); */
case 2:
case 1:
default:
break;
};
return err;
}
/* Chips other than 5700/5701 use the NVRAM for fetching info. */
static void tg3_nvram_init(struct tg3 *tp)
{
tw32(GRC_EEPROM_ADDR,
(EEPROM_ADDR_FSM_RESET |
(EEPROM_DEFAULT_CLOCK_PERIOD <<
EEPROM_ADDR_CLKPERD_SHIFT)));
mdelay(1);
/* Enable seeprom accesses. */
tw32_carefully(GRC_LOCAL_CTRL,
tr32(GRC_LOCAL_CTRL) | GRC_LCLCTRL_AUTO_SEEPROM);
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) {
uint32_t nvcfg1 = tr32(NVRAM_CFG1);
tp->tg3_flags |= TG3_FLAG_NVRAM;
if (nvcfg1 & NVRAM_CFG1_FLASHIF_ENAB) {
if (nvcfg1 & NVRAM_CFG1_BUFFERED_MODE)
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
} else {
nvcfg1 &= ~NVRAM_CFG1_COMPAT_BYPASS;
tw32(NVRAM_CFG1, nvcfg1);
}
} else {
tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
}
}
static int tg3_nvram_read_using_eeprom(
struct tg3 *tp __unused, uint32_t offset, uint32_t *val)
{
uint32_t tmp;
int i;
if (offset > EEPROM_ADDR_ADDR_MASK ||
(offset % 4) != 0) {
return -EINVAL;
}
tmp = tr32(GRC_EEPROM_ADDR) & ~(EEPROM_ADDR_ADDR_MASK |
EEPROM_ADDR_DEVID_MASK |
EEPROM_ADDR_READ);
tw32(GRC_EEPROM_ADDR,
tmp |
(0 << EEPROM_ADDR_DEVID_SHIFT) |
((offset << EEPROM_ADDR_ADDR_SHIFT) &
EEPROM_ADDR_ADDR_MASK) |
EEPROM_ADDR_READ | EEPROM_ADDR_START);
for (i = 0; i < 10000; i++) {
tmp = tr32(GRC_EEPROM_ADDR);
if (tmp & EEPROM_ADDR_COMPLETE)
break;
udelay(100);
}
if (!(tmp & EEPROM_ADDR_COMPLETE)) {
return -EBUSY;
}
*val = tr32(GRC_EEPROM_DATA);
return 0;
}
static int tg3_nvram_read(struct tg3 *tp, uint32_t offset, uint32_t *val)
{
int i, saw_done_clear;
if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
return tg3_nvram_read_using_eeprom(tp, offset, val);
if (tp->tg3_flags & TG3_FLAG_NVRAM_BUFFERED)
offset = ((offset / NVRAM_BUFFERED_PAGE_SIZE) <<
NVRAM_BUFFERED_PAGE_POS) +
(offset % NVRAM_BUFFERED_PAGE_SIZE);
if (offset > NVRAM_ADDR_MSK)
return -EINVAL;
tw32(NVRAM_SWARB, SWARB_REQ_SET1);
for (i = 0; i < 1000; i++) {
if (tr32(NVRAM_SWARB) & SWARB_GNT1)
break;
udelay(20);
}
tw32(NVRAM_ADDR, offset);
tw32(NVRAM_CMD,
NVRAM_CMD_RD | NVRAM_CMD_GO |
NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
/* Wait for done bit to clear then set again. */
saw_done_clear = 0;
for (i = 0; i < 1000; i++) {
udelay(10);
if (!saw_done_clear &&
!(tr32(NVRAM_CMD) & NVRAM_CMD_DONE))
saw_done_clear = 1;
else if (saw_done_clear &&
(tr32(NVRAM_CMD) & NVRAM_CMD_DONE))
break;
}
if (i >= 1000) {
tw32(NVRAM_SWARB, SWARB_REQ_CLR1);
return -EBUSY;
}
*val = bswap_32(tr32(NVRAM_RDDATA));
tw32(NVRAM_SWARB, 0x20);
return 0;
}
struct subsys_tbl_ent {
uint16_t subsys_vendor, subsys_devid;
uint32_t phy_id;
};
static struct subsys_tbl_ent subsys_id_to_phy_id[] = {
/* Broadcom boards. */
{ 0x14e4, 0x1644, PHY_ID_BCM5401 }, /* BCM95700A6 */
{ 0x14e4, 0x0001, PHY_ID_BCM5701 }, /* BCM95701A5 */
{ 0x14e4, 0x0002, PHY_ID_BCM8002 }, /* BCM95700T6 */
{ 0x14e4, 0x0003, PHY_ID_SERDES }, /* BCM95700A9 */
{ 0x14e4, 0x0005, PHY_ID_BCM5701 }, /* BCM95701T1 */
{ 0x14e4, 0x0006, PHY_ID_BCM5701 }, /* BCM95701T8 */
{ 0x14e4, 0x0007, PHY_ID_SERDES }, /* BCM95701A7 */
{ 0x14e4, 0x0008, PHY_ID_BCM5701 }, /* BCM95701A10 */
{ 0x14e4, 0x8008, PHY_ID_BCM5701 }, /* BCM95701A12 */
{ 0x14e4, 0x0009, PHY_ID_BCM5701 }, /* BCM95703Ax1 */
{ 0x14e4, 0x8009, PHY_ID_BCM5701 }, /* BCM95703Ax2 */
/* 3com boards. */
{ PCI_VENDOR_ID_3COM, 0x1000, PHY_ID_BCM5401 }, /* 3C996T */
{ PCI_VENDOR_ID_3COM, 0x1006, PHY_ID_BCM5701 }, /* 3C996BT */
/* { PCI_VENDOR_ID_3COM, 0x1002, PHY_ID_XXX }, 3C996CT */
/* { PCI_VENDOR_ID_3COM, 0x1003, PHY_ID_XXX }, 3C997T */
{ PCI_VENDOR_ID_3COM, 0x1004, PHY_ID_SERDES }, /* 3C996SX */
/* { PCI_VENDOR_ID_3COM, 0x1005, PHY_ID_XXX }, 3C997SZ */
{ PCI_VENDOR_ID_3COM, 0x1007, PHY_ID_BCM5701 }, /* 3C1000T */
{ PCI_VENDOR_ID_3COM, 0x1008, PHY_ID_BCM5701 }, /* 3C940BR01 */
/* DELL boards. */
{ PCI_VENDOR_ID_DELL, 0x00d1, PHY_ID_BCM5401 }, /* VIPER */
{ PCI_VENDOR_ID_DELL, 0x0106, PHY_ID_BCM5401 }, /* JAGUAR */
{ PCI_VENDOR_ID_DELL, 0x0109, PHY_ID_BCM5411 }, /* MERLOT */
{ PCI_VENDOR_ID_DELL, 0x010a, PHY_ID_BCM5411 }, /* SLIM_MERLOT */
{ PCI_VENDOR_ID_DELL, 0x0179, PHY_ID_BCM5751 }, /* EtherXpress */
/* Compaq boards. */
{ PCI_VENDOR_ID_COMPAQ, 0x007c, PHY_ID_BCM5701 }, /* BANSHEE */
{ PCI_VENDOR_ID_COMPAQ, 0x009a, PHY_ID_BCM5701 }, /* BANSHEE_2 */
{ PCI_VENDOR_ID_COMPAQ, 0x007d, PHY_ID_SERDES }, /* CHANGELING */
{ PCI_VENDOR_ID_COMPAQ, 0x0085, PHY_ID_BCM5701 }, /* NC7780 */
{ PCI_VENDOR_ID_COMPAQ, 0x0099, PHY_ID_BCM5701 } /* NC7780_2 */
};
static int tg3_phy_probe(struct tg3 *tp)
{
uint32_t eeprom_phy_id, hw_phy_id_1, hw_phy_id_2;
uint32_t hw_phy_id, hw_phy_id_masked;
enum phy_led_mode eeprom_led_mode;
uint32_t val;
unsigned i;
int eeprom_signature_found, err;
tp->phy_id = PHY_ID_INVALID;
for (i = 0; i < sizeof(subsys_id_to_phy_id)/sizeof(subsys_id_to_phy_id[0]); i++) {
if ((subsys_id_to_phy_id[i].subsys_vendor == tp->subsystem_vendor) &&
(subsys_id_to_phy_id[i].subsys_devid == tp->subsystem_device)) {
tp->phy_id = subsys_id_to_phy_id[i].phy_id;
break;
}
}
eeprom_phy_id = PHY_ID_INVALID;
eeprom_led_mode = led_mode_auto;
eeprom_signature_found = 0;
tg3_read_mem(NIC_SRAM_DATA_SIG, &val);
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
uint32_t nic_cfg;
tg3_read_mem(NIC_SRAM_DATA_CFG, &nic_cfg);
tp->nic_sram_data_cfg = nic_cfg;
eeprom_signature_found = 1;
if ((nic_cfg & NIC_SRAM_DATA_CFG_PHY_TYPE_MASK) ==
NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER) {
eeprom_phy_id = PHY_ID_SERDES;
} else {
uint32_t nic_phy_id;
tg3_read_mem(NIC_SRAM_DATA_PHY_ID, &nic_phy_id);
if (nic_phy_id != 0) {
uint32_t id1 = nic_phy_id & NIC_SRAM_DATA_PHY_ID1_MASK;
uint32_t id2 = nic_phy_id & NIC_SRAM_DATA_PHY_ID2_MASK;
eeprom_phy_id = (id1 >> 16) << 10;
eeprom_phy_id |= (id2 & 0xfc00) << 16;
eeprom_phy_id |= (id2 & 0x03ff) << 0;
}
}
switch (nic_cfg & NIC_SRAM_DATA_CFG_LED_MODE_MASK) {
case NIC_SRAM_DATA_CFG_LED_TRIPLE_SPD:
eeprom_led_mode = led_mode_three_link;
break;
case NIC_SRAM_DATA_CFG_LED_LINK_SPD:
eeprom_led_mode = led_mode_link10;
break;
default:
eeprom_led_mode = led_mode_auto;
break;
};
if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) &&
(nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)) {
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
}
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE)
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
if (nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)
tp->tg3_flags |= TG3_FLAG_SERDES_WOL_CAP;
}
/* Now read the physical PHY_ID from the chip and verify
* that it is sane. If it doesn't look good, we fall back
* to either the hard-coded table based PHY_ID and failing
* that the value found in the eeprom area.
*/
err = tg3_readphy(tp, MII_PHYSID1, &hw_phy_id_1);
err |= tg3_readphy(tp, MII_PHYSID2, &hw_phy_id_2);
hw_phy_id = (hw_phy_id_1 & 0xffff) << 10;
hw_phy_id |= (hw_phy_id_2 & 0xfc00) << 16;
hw_phy_id |= (hw_phy_id_2 & 0x03ff) << 0;
hw_phy_id_masked = hw_phy_id & PHY_ID_MASK;
if (!err && KNOWN_PHY_ID(hw_phy_id_masked)) {
tp->phy_id = hw_phy_id;
} else {
/* phy_id currently holds the value found in the
* subsys_id_to_phy_id[] table or PHY_ID_INVALID
* if a match was not found there.
*/
if (tp->phy_id == PHY_ID_INVALID) {
if (!eeprom_signature_found ||
!KNOWN_PHY_ID(eeprom_phy_id & PHY_ID_MASK))
return -ENODEV;
tp->phy_id = eeprom_phy_id;
}
}
err = tg3_phy_reset(tp);
if (err)
return err;
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 ||
tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) {
uint32_t mii_tg3_ctrl;
/* These chips, when reset, only advertise 10Mb
* capabilities. Fix that.
*/
err = tg3_writephy(tp, MII_ADVERTISE,
(ADVERTISE_CSMA |
ADVERTISE_PAUSE_CAP |
ADVERTISE_10HALF |
ADVERTISE_10FULL |
ADVERTISE_100HALF |
ADVERTISE_100FULL));
mii_tg3_ctrl = (MII_TG3_CTRL_ADV_1000_HALF |
MII_TG3_CTRL_ADV_1000_FULL |
MII_TG3_CTRL_AS_MASTER |
MII_TG3_CTRL_ENABLE_AS_MASTER);
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
mii_tg3_ctrl = 0;
err |= tg3_writephy(tp, MII_TG3_CTRL, mii_tg3_ctrl);
err |= tg3_writephy(tp, MII_BMCR,
(BMCR_ANRESTART | BMCR_ANENABLE));
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x201f);
tg3_writedsp(tp, MII_TG3_DSP_RW_PORT, 0x2aaa);
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
tg3_writephy(tp, 0x1c, 0x8d68);
tg3_writephy(tp, 0x1c, 0x8d68);
}
/* Enable Ethernet@WireSpeed */
tg3_phy_set_wirespeed(tp);
if (!err && ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)) {
err = tg3_init_5401phy_dsp(tp);
}
/* Determine the PHY led mode.
* Be careful if this gets set wrong it can result in an inability to
* establish a link.
*/
if (tp->phy_id == PHY_ID_SERDES) {
tp->led_mode = led_mode_three_link;
}
else if (tp->subsystem_vendor == PCI_VENDOR_ID_DELL) {
tp->led_mode = led_mode_link10;
} else {
tp->led_mode = led_mode_three_link;
if (eeprom_signature_found &&
eeprom_led_mode != led_mode_auto)
tp->led_mode = eeprom_led_mode;
}
if (tp->phy_id == PHY_ID_SERDES)
tp->link_config.advertising =
(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full |
ADVERTISED_Autoneg |
ADVERTISED_FIBRE);
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
tp->link_config.advertising &=
~(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full);
return err;
}
#if SUPPORT_PARTNO_STR
static void tg3_read_partno(struct tg3 *tp)
{
unsigned char vpd_data[256];
int i;
for (i = 0; i < 256; i += 4) {
uint32_t tmp;
if (tg3_nvram_read(tp, 0x100 + i, &tmp))
goto out_not_found;
vpd_data[i + 0] = ((tmp >> 0) & 0xff);
vpd_data[i + 1] = ((tmp >> 8) & 0xff);
vpd_data[i + 2] = ((tmp >> 16) & 0xff);
vpd_data[i + 3] = ((tmp >> 24) & 0xff);
}
/* Now parse and find the part number. */
for (i = 0; i < 256; ) {
unsigned char val = vpd_data[i];
int block_end;
if (val == 0x82 || val == 0x91) {
i = (i + 3 +
(vpd_data[i + 1] +
(vpd_data[i + 2] << 8)));
continue;
}
if (val != 0x90)
goto out_not_found;
block_end = (i + 3 +
(vpd_data[i + 1] +
(vpd_data[i + 2] << 8)));
i += 3;
while (i < block_end) {
if (vpd_data[i + 0] == 'P' &&
vpd_data[i + 1] == 'N') {
int partno_len = vpd_data[i + 2];
if (partno_len > 24)
goto out_not_found;
memcpy(tp->board_part_number,
&vpd_data[i + 3],
partno_len);
/* Success. */
return;
}
}
/* Part number not found. */
goto out_not_found;
}
out_not_found:
memcpy(tp->board_part_number, "none", sizeof("none"));
}
#else
#define tg3_read_partno(TP) ((TP)->board_part_number[0] = '\0')
#endif
static int tg3_get_invariants(struct tg3 *tp)
{
uint32_t misc_ctrl_reg;
uint32_t pci_state_reg, grc_misc_cfg;
uint16_t pci_cmd;
uint8_t pci_latency;
uint32_t val ;
int err;
/* Read the subsystem vendor and device ids */
pci_read_config_word(tp->pdev, PCI_SUBSYSTEM_VENDOR_ID, &tp->subsystem_vendor);
pci_read_config_word(tp->pdev, PCI_SUBSYSTEM_ID, &tp->subsystem_device);
/* The sun_5704 code needs infrastructure etherboot does have
* ignore it for now.
*/
/* If we have an AMD 762 or Intel ICH/ICH0 chipset, write
* reordering to the mailbox registers done by the host
* controller can cause major troubles. We read back from
* every mailbox register write to force the writes to be
* posted to the chip in order.
*
* TG3_FLAG_MBOX_WRITE_REORDER has been forced on.
*/
/* Force memory write invalidate off. If we leave it on,
* then on 5700_BX chips we have to enable a workaround.
* The workaround is to set the TG3PCI_DMA_RW_CTRL boundry
* to match the cacheline size. The Broadcom driver have this
* workaround but turns MWI off all the times so never uses
* it. This seems to suggest that the workaround is insufficient.
*/
pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
pci_cmd &= ~PCI_COMMAND_INVALIDATE;
/* Also, force SERR#/PERR# in PCI command. */
pci_cmd |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
/* It is absolutely critical that TG3PCI_MISC_HOST_CTRL
* has the register indirect write enable bit set before
* we try to access any of the MMIO registers. It is also
* critical that the PCI-X hw workaround situation is decided
* before that as well.
*/
pci_read_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, &misc_ctrl_reg);
tp->pci_chip_rev_id = (misc_ctrl_reg >> MISC_HOST_CTRL_CHIPREV_SHIFT);
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
MISC_HOST_CTRL_CHIPREV);
pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
tp->misc_host_ctrl);
pci_read_config_byte(tp->pdev, PCI_LATENCY_TIMER, &pci_latency);
if (pci_latency < 64) {
pci_write_config_byte(tp->pdev, PCI_LATENCY_TIMER, 64);
}
pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &pci_state_reg);
/* If this is a 5700 BX chipset, and we are in PCI-X
* mode, enable register write workaround.
*
* The workaround is to use indirect register accesses
* for all chip writes not to mailbox registers.
*
* In etherboot to simplify things we just always use this work around.
*/
if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0) {
tp->tg3_flags |= TG3_FLAG_PCIX_MODE;
}
/* Back to back register writes can cause problems on the 5701,
* the workaround is to read back all reg writes except those to
* mailbox regs.
* In etherboot we always use indirect register accesses so
* we don't see this.
*/
if ((pci_state_reg & PCISTATE_BUS_SPEED_HIGH) != 0)
tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
/* Chip-specific fixup from Broadcom driver */
if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&
(!(pci_state_reg & PCISTATE_RETRY_SAME_DMA))) {
pci_state_reg |= PCISTATE_RETRY_SAME_DMA;
pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
}
/* determine if it is PCIE system */
// Alf : I have no idea what this is about...
// But it's definitely usefull
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) {
val = tr32(TG3PCI_MSI_CAP_ID) ;
if (((val >> 8) & 0xff) == T3_PCIE_CAPABILITY_ID_REG) {
val = tr32(T3_PCIE_CAPABILITY_ID_REG) ;
if ((val & 0xff) == T3_PCIE_CAPABILITY_ID) {
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS ;
}
}
}
/* Force the chip into D0. */
tg3_set_power_state_0(tp);
/* Etherboot does not ask the tg3 to do checksums */
/* Etherboot does not ask the tg3 to do jumbo frames */
/* Ehterboot does not ask the tg3 to use WakeOnLan. */
/* A few boards don't want Ethernet@WireSpeed phy feature */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750) ||
((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A1))) {
tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
}
/* Avoid tagged irq status etherboot does not use irqs */
/* Only 5701 and later support tagged irq status mode.
* Also, 5788 chips cannot use tagged irq status.
*
* However, since etherboot does not use irqs avoid tagged irqs
* status because the interrupt condition is more difficult to
* fully clear in that mode.
*/
/* Since some 5700_AX && 5700_BX have problems with 32BYTE
* coalesce_mode, and the rest work fine anything set.
* Don't enable HOST_CC_MODE_32BYTE in etherboot.
*/
/* Initialize MAC MI mode, polling disabled. */
tw32_carefully(MAC_MI_MODE, tp->mi_mode);
/* Initialize data/descriptor byte/word swapping. */
tw32(GRC_MODE, tp->grc_mode);
tg3_switch_clocks(tp);
/* Clear this out for sanity. */
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
/* Etherboot does not need to check if the PCIX_TARGET_HWBUG
* is needed. It always uses it.
*/
udelay(50);
tg3_nvram_init(tp);
/* The TX descriptors will reside in main memory.
*/
/* See which board we are using.
*/
grc_misc_cfg = tr32(GRC_MISC_CFG);
grc_misc_cfg &= GRC_MISC_CFG_BOARD_ID_MASK;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5704CIOBE) {
tp->tg3_flags |= TG3_FLAG_SPLIT_MODE;
tp->split_mode_max_reqs = SPLIT_MODE_5704_MAX_REQ;
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705 &&
(grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788 ||
grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M))
tp->tg3_flags2 |= TG3_FLG2_IS_5788;
#define PCI_DEVICE_ID_TIGON3_5901 0x170d
#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e
/* these are limited to 10/100 only */
if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) &&
((grc_misc_cfg == 0x8000) || (grc_misc_cfg == 0x4000))) ||
((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
(tp->pdev->vendor == PCI_VENDOR_ID_BROADCOM) &&
((tp->pdev->dev_id == PCI_DEVICE_ID_TIGON3_5901) ||
(tp->pdev->dev_id == PCI_DEVICE_ID_TIGON3_5901_2)))) {
tp->tg3_flags |= TG3_FLAG_10_100_ONLY;
}
err = tg3_phy_probe(tp);
if (err) {
printf("phy probe failed, err %d\n", err);
}
tg3_read_partno(tp);
/* 5700 BX chips need to have their TX producer index mailboxes
* written twice to workaround a bug.
* In etherboot we do this unconditionally to simplify things.
*/
/* 5700 chips can get confused if TX buffers straddle the
* 4GB address boundary in some cases.
*
* In etherboot we can ignore the problem as etherboot lives below 4GB.
*/
/* In etherboot wake-on-lan is unconditionally disabled */
return err;
}
static int tg3_get_device_address(struct tg3 *tp)
{
struct nic *nic = tp->nic;
uint32_t hi, lo, mac_offset;
if (PCI_FUNC(tp->pdev->devfn) == 0)
mac_offset = 0x7c;
else
mac_offset = 0xcc;
/* First try to get it from MAC address mailbox. */
tg3_read_mem(NIC_SRAM_MAC_ADDR_HIGH_MBOX, &hi);
if ((hi >> 16) == 0x484b) {
nic->node_addr[0] = (hi >> 8) & 0xff;
nic->node_addr[1] = (hi >> 0) & 0xff;
tg3_read_mem(NIC_SRAM_MAC_ADDR_LOW_MBOX, &lo);
nic->node_addr[2] = (lo >> 24) & 0xff;
nic->node_addr[3] = (lo >> 16) & 0xff;
nic->node_addr[4] = (lo >> 8) & 0xff;
nic->node_addr[5] = (lo >> 0) & 0xff;
}
/* Next, try NVRAM. */
else if (!tg3_nvram_read(tp, mac_offset + 0, &hi) &&
!tg3_nvram_read(tp, mac_offset + 4, &lo)) {
nic->node_addr[0] = ((hi >> 16) & 0xff);
nic->node_addr[1] = ((hi >> 24) & 0xff);
nic->node_addr[2] = ((lo >> 0) & 0xff);
nic->node_addr[3] = ((lo >> 8) & 0xff);
nic->node_addr[4] = ((lo >> 16) & 0xff);
nic->node_addr[5] = ((lo >> 24) & 0xff);
}
/* Finally just fetch it out of the MAC control regs. */
else {
hi = tr32(MAC_ADDR_0_HIGH);
lo = tr32(MAC_ADDR_0_LOW);
nic->node_addr[5] = lo & 0xff;
nic->node_addr[4] = (lo >> 8) & 0xff;
nic->node_addr[3] = (lo >> 16) & 0xff;
nic->node_addr[2] = (lo >> 24) & 0xff;
nic->node_addr[1] = hi & 0xff;
nic->node_addr[0] = (hi >> 8) & 0xff;
}
return 0;
}
static int tg3_setup_dma(struct tg3 *tp)
{
tw32(TG3PCI_CLOCK_CTRL, 0);
if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) == 0) {
tp->dma_rwctrl =
(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
(0x7 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
(0x7 << DMA_RWCTRL_READ_WATER_SHIFT) |
(0x0f << DMA_RWCTRL_MIN_DMA_SHIFT);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
tp->dma_rwctrl &= ~(DMA_RWCTRL_MIN_DMA << DMA_RWCTRL_MIN_DMA_SHIFT);
}
} else {
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
tp->dma_rwctrl =
(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
(0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
(0x7 << DMA_RWCTRL_READ_WATER_SHIFT) |
(0x00 << DMA_RWCTRL_MIN_DMA_SHIFT);
else
tp->dma_rwctrl =
(0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) |
(0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT) |
(0x3 << DMA_RWCTRL_WRITE_WATER_SHIFT) |
(0x3 << DMA_RWCTRL_READ_WATER_SHIFT) |
(0x0f << DMA_RWCTRL_MIN_DMA_SHIFT);
/* Wheee, some more chip bugs... */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)) {
uint32_t ccval = tr32(TG3PCI_CLOCK_CTRL) & 0x1f;
if ((ccval == 0x6) || (ccval == 0x7)) {
tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
}
}
}
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703) ||
(GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)) {
tp->dma_rwctrl &= ~(DMA_RWCTRL_MIN_DMA << DMA_RWCTRL_MIN_DMA_SHIFT);
}
/*
Alf : Tried that, but it does not work. Should be this way though :-(
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
tp->dma_rwctrl |= 0x001f0000;
}
*/
tp->dma_rwctrl |= DMA_RWCTRL_ASSERT_ALL_BE;
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
return 0;
}
static void tg3_init_link_config(struct tg3 *tp)
{
tp->link_config.advertising =
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
ADVERTISED_Autoneg | ADVERTISED_MII);
tp->carrier_ok = 0;
tp->link_config.active_speed = SPEED_INVALID;
tp->link_config.active_duplex = DUPLEX_INVALID;
}
#if SUPPORT_PHY_STR
static const char * tg3_phy_string(struct tg3 *tp)
{
switch (tp->phy_id & PHY_ID_MASK) {
case PHY_ID_BCM5400: return "5400";
case PHY_ID_BCM5401: return "5401";
case PHY_ID_BCM5411: return "5411";
case PHY_ID_BCM5701: return "5701";
case PHY_ID_BCM5703: return "5703";
case PHY_ID_BCM5704: return "5704";
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5751: return "5751";
case PHY_ID_BCM8002: return "8002/serdes";
case PHY_ID_SERDES: return "serdes";
default: return "unknown";
};
}
#else
#define tg3_phy_string(TP) "?"
#endif
static void tg3_poll_link(struct tg3 *tp)
{
uint32_t mac_stat;
mac_stat = tr32(MAC_STATUS);
if (tp->phy_id == PHY_ID_SERDES) {
if (tp->carrier_ok?
(mac_stat & MAC_STATUS_LNKSTATE_CHANGED):
(mac_stat & MAC_STATUS_PCS_SYNCED)) {
tw32_carefully(MAC_MODE, tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK);
tw32_carefully(MAC_MODE, tp->mac_mode);
tg3_setup_phy(tp);
}
}
else {
if (mac_stat & MAC_STATUS_LNKSTATE_CHANGED) {
tg3_setup_phy(tp);
}
}
}
/**************************************************************************
POLL - Wait for a frame
***************************************************************************/
static void tg3_ack_irqs(struct tg3 *tp)
{
if (tp->hw_status->status & SD_STATUS_UPDATED) {
/*
* writing any value to intr-mbox-0 clears PCI INTA# and
* chip-internal interrupt pending events.
* writing non-zero to intr-mbox-0 additional tells the
* NIC to stop sending us irqs, engaging "in-intr-handler"
* event coalescing.
*/
tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
0x00000001);
/*
* Flush PCI write. This also guarantees that our
* status block has been flushed to host memory.
*/
tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
tp->hw_status->status &= ~SD_STATUS_UPDATED;
}
}
static int tg3_poll(struct nic *nic, int retrieve)
{
/* return true if there's an ethernet packet ready to read */
/* nic->packet should contain data on return */
/* nic->packetlen should contain length of data */
struct tg3 *tp = &tg3;
int result;
result = 0;
if ( (tp->hw_status->idx[0].rx_producer != tp->rx_rcb_ptr) && !retrieve )
return 1;
tg3_ack_irqs(tp);
if (tp->hw_status->idx[0].rx_producer != tp->rx_rcb_ptr) {
struct tg3_rx_buffer_desc *desc;
unsigned int len;
desc = &tp->rx_rcb[tp->rx_rcb_ptr];
if ((desc->opaque & RXD_OPAQUE_RING_MASK) == RXD_OPAQUE_RING_STD) {
len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; /* omit crc */
nic->packetlen = len;
memcpy(nic->packet, bus_to_virt(desc->addr_lo), len);
result = 1;
}
tp->rx_rcb_ptr = (tp->rx_rcb_ptr + 1) % TG3_RX_RCB_RING_SIZE;
/* ACK the status ring */
tw32_mailbox2(MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW, tp->rx_rcb_ptr);
/* Refill RX ring. */
if (result) {
tp->rx_std_ptr = (tp->rx_std_ptr + 1) % TG3_RX_RING_SIZE;
tw32_mailbox2(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW, tp->rx_std_ptr);
}
}
tg3_poll_link(tp);
return result;
}
/**************************************************************************
TRANSMIT - Transmit a frame
***************************************************************************/
#if 0
static void tg3_set_txd(struct tg3 *tp, int entry,
dma_addr_t mapping, int len, uint32_t flags,
uint32_t mss_and_is_end)
{
struct tg3_tx_buffer_desc *txd = &tp->tx_ring[entry];
int is_end = (mss_and_is_end & 0x1);
if (is_end) {
flags |= TXD_FLAG_END;
}
txd->addr_hi = 0;
txd->addr_lo = mapping & 0xffffffff;
txd->len_flags = (len << TXD_LEN_SHIFT) | flags;
txd->vlan_tag = 0 << TXD_VLAN_TAG_SHIFT;
}
#endif
static void tg3_transmit(struct nic *nic, const char *dst_addr,
unsigned int type, unsigned int size, const char *packet)
{
static struct eth_frame {
uint8_t dst_addr[ETH_ALEN];
uint8_t src_addr[ETH_ALEN];
uint16_t type;
uint8_t data [ETH_FRAME_LEN - ETH_HLEN];
} frame[2];
static int frame_idx;
/* send the packet to destination */
struct tg3_tx_buffer_desc *txd;
struct tg3 *tp;
uint32_t entry;
int i;
/* Wait until there is a free packet frame */
tp = &tg3;
i = 0;
entry = tp->tx_prod;
while((tp->hw_status->idx[0].tx_consumer != entry) &&
(tp->hw_status->idx[0].tx_consumer != PREV_TX(entry))) {
mdelay(10); /* give the nick a chance */
poll_interruptions();
if (++i > 500) { /* timeout 5s for transmit */
printf("transmit timed out\n");
tg3_halt(tp);
tg3_setup_hw(tp);
return;
}
}
if (i != 0) {
printf("#");
}
/* Copy the packet to the our local buffer */
memcpy(&frame[frame_idx].dst_addr, dst_addr, ETH_ALEN);
memcpy(&frame[frame_idx].src_addr, nic->node_addr, ETH_ALEN);
frame[frame_idx].type = htons(type);
memset(&frame[frame_idx].data, 0, sizeof(frame[frame_idx].data));
memcpy(&frame[frame_idx].data, packet, size);
/* Setup the ring buffer entry to transmit */
txd = &tp->tx_ring[entry];
txd->addr_hi = 0; /* Etherboot runs under 4GB */
txd->addr_lo = virt_to_bus(&frame[frame_idx]);
txd->len_flags = ((size + ETH_HLEN) << TXD_LEN_SHIFT) | TXD_FLAG_END;
txd->vlan_tag = 0 << TXD_VLAN_TAG_SHIFT;
/* Advance to the next entry */
entry = NEXT_TX(entry);
frame_idx ^= 1;
/* Packets are ready, update Tx producer idx local and on card */
tw32_mailbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
tw32_mailbox2((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
tp->tx_prod = entry;
}
/**************************************************************************
DISABLE - Turn off ethernet interface
***************************************************************************/
static void tg3_disable(struct dev *dev __unused)
{
struct tg3 *tp = &tg3;
/* put the card in its initial state */
/* This function serves 3 purposes.
* This disables DMA and interrupts so we don't receive
* unexpected packets or interrupts from the card after
* etherboot has finished.
* This frees resources so etherboot may use
* this driver on another interface
* This allows etherboot to reinitialize the interface
* if something is something goes wrong.
*/
tg3_halt(tp);
tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE|TG3_FLAG_GOT_SERDES_FLOWCTL);
tp->carrier_ok = 0;
iounmap((void *)tp->regs);
}
/**************************************************************************
IRQ - Enable, Disable, or Force interrupts
***************************************************************************/
static void tg3_irq(struct nic *nic __unused, irq_action_t action __unused)
{
switch ( action ) {
case DISABLE :
break;
case ENABLE :
break;
case FORCE :
break;
}
}
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
You should omit the last argument struct pci_device * for a non-PCI NIC
***************************************************************************/
Automatically updated using perl -pi -0777 -e 's/_probe\s*\(\s*struct dev \*dev,\s*struct pci_device \*(\w+?)\s*\)\s*{(\s*)struct nic \*nic.*?$/_probe ( struct dev *dev ) {\n${2}struct nic *nic = nic_device ( dev );\n${2}struct pci_device *$1 = pci_device ( dev );/ms' *.c
2005-04-12 23:24:39 +00:00
static int tg3_probe ( struct dev *dev ) {
struct nic *nic = nic_device ( dev );
struct pci_device *pdev = pci_device ( dev );
Initial revision
2005-03-08 18:53:11 +00:00
struct tg3 *tp = &tg3;
unsigned long tg3reg_base, tg3reg_len;
int i, err, pm_cap;
if (pdev == 0)
return 0;
memset(tp, 0, sizeof(*tp));
adjust_pci_device(pdev);
nic->irqno = 0;
nic->ioaddr = pdev->ioaddr & ~3;
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
printf("Cannot find PowerManagement capability, aborting.\n");
return 0;
}
tg3reg_base = pci_bar_start(pdev, PCI_BASE_ADDRESS_0);
if (tg3reg_base == -1UL) {
printf("Unuseable bar\n");
return 0;
}
tg3reg_len = pci_bar_size(pdev, PCI_BASE_ADDRESS_0);
tp->pdev = pdev;
tp->nic = nic;
tp->pm_cap = pm_cap;
tp->rx_mode = 0;
tp->tx_mode = 0;
tp->mi_mode = MAC_MI_MODE_BASE;
tp->tg3_flags = 0 & ~TG3_FLAG_INIT_COMPLETE;
/* The word/byte swap controls here control register access byte
* swapping. DMA data byte swapping is controlled in the GRC_MODE
* setting below.
*/
tp->misc_host_ctrl =
MISC_HOST_CTRL_MASK_PCI_INT |
MISC_HOST_CTRL_WORD_SWAP |
MISC_HOST_CTRL_INDIR_ACCESS |
MISC_HOST_CTRL_PCISTATE_RW;
/* The NONFRM (non-frame) byte/word swap controls take effect
* on descriptor entries, anything which isn't packet data.
*
* The StrongARM chips on the board (one for tx, one for rx)
* are running in big-endian mode.
*/
tp->grc_mode = (GRC_MODE_WSWAP_DATA | GRC_MODE_BSWAP_DATA |
GRC_MODE_WSWAP_NONFRM_DATA);
#if __BYTE_ORDER == __BIG_ENDIAN
tp->grc_mode |= GRC_MODE_BSWAP_NONFRM_DATA;
#endif
tp->regs = (unsigned long) ioremap(tg3reg_base, tg3reg_len);
if (tp->regs == 0UL) {
printf("Cannot map device registers, aborting\n");
return 0;
}
tg3_init_link_config(tp);
err = tg3_get_invariants(tp);
if (err) {
printf("Problem fetching invariants of chip, aborting.\n");
goto err_out_iounmap;
}
err = tg3_get_device_address(tp);
if (err) {
printf("Could not obtain valid ethernet address, aborting.\n");
goto err_out_iounmap;
}
printf("Ethernet addr: %!\n", nic->node_addr);
tg3_setup_dma(tp);
/* Now that we have fully setup the chip, save away a snapshot
* of the PCI config space. We need to restore this after
* GRC_MISC_CFG core clock resets and some resume events.
*/
pci_save_state(tp->pdev, tp->pci_cfg_state);
printf("Tigon3 [partno(%s) rev %hx PHY(%s)] (PCI%s:%s:%s)\n",
tp->board_part_number,
tp->pci_chip_rev_id,
tg3_phy_string(tp),
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "X" : ""),
((tp->tg3_flags & TG3_FLAG_PCI_HIGH_SPEED) ?
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "133MHz" : "66MHz") :
((tp->tg3_flags & TG3_FLAG_PCIX_MODE) ? "100MHz" : "33MHz")),
((tp->tg3_flags & TG3_FLAG_PCI_32BIT) ? "32-bit" : "64-bit"));
err = tg3_setup_hw(tp);
if (err) {
goto err_out_disable;
}
tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
/* Wait for a reasonable time for the link to come up */
tg3_poll_link(tp);
for(i = 0; !tp->carrier_ok && (i < VALID_LINK_TIMEOUT*100); i++) {
mdelay(1);
tg3_poll_link(tp);
}
if (!tp->carrier_ok){
printf("Valid link not established\n");
goto err_out_disable;
}
dev->disable = tg3_disable;
nic->poll = tg3_poll;
nic->transmit = tg3_transmit;
nic->irq = tg3_irq;
return 1;
err_out_iounmap:
iounmap((void *)tp->regs);
return 0;
err_out_disable:
tg3_disable(dev);
return 0;
}
static struct pci_id tg3_nics[] = {
PCI_ROM(0x14e4, 0x1644, "tg3-5700", "Broadcom Tigon 3 5700"),
PCI_ROM(0x14e4, 0x1645, "tg3-5701", "Broadcom Tigon 3 5701"),
PCI_ROM(0x14e4, 0x1646, "tg3-5702", "Broadcom Tigon 3 5702"),
PCI_ROM(0x14e4, 0x1647, "tg3-5703", "Broadcom Tigon 3 5703"),
PCI_ROM(0x14e4, 0x1648, "tg3-5704", "Broadcom Tigon 3 5704"),
PCI_ROM(0x14e4, 0x164d, "tg3-5702FE", "Broadcom Tigon 3 5702FE"),
PCI_ROM(0x14e4, 0x1653, "tg3-5705", "Broadcom Tigon 3 5705"),
PCI_ROM(0x14e4, 0x1654, "tg3-5705_2", "Broadcom Tigon 3 5705_2"),
PCI_ROM(0x14e4, 0x165d, "tg3-5705M", "Broadcom Tigon 3 5705M"),
PCI_ROM(0x14e4, 0x165e, "tg3-5705M_2", "Broadcom Tigon 3 5705M_2"),
PCI_ROM(0x14e4, 0x1677, "tg3-5751", "Broadcom Tigon 3 5751"),
PCI_ROM(0x14e4, 0x1696, "tg3-5782", "Broadcom Tigon 3 5782"),
PCI_ROM(0x14e4, 0x169c, "tg3-5788", "Broadcom Tigon 3 5788"),
PCI_ROM(0x14e4, 0x16a6, "tg3-5702X", "Broadcom Tigon 3 5702X"),
PCI_ROM(0x14e4, 0x16a7, "tg3-5703X", "Broadcom Tigon 3 5703X"),
PCI_ROM(0x14e4, 0x16a8, "tg3-5704S", "Broadcom Tigon 3 5704S"),
PCI_ROM(0x14e4, 0x16c6, "tg3-5702A3", "Broadcom Tigon 3 5702A3"),
PCI_ROM(0x14e4, 0x16c7, "tg3-5703A3", "Broadcom Tigon 3 5703A3"),
PCI_ROM(0x14e4, 0x170d, "tg3-5901", "Broadcom Tigon 3 5901"),
PCI_ROM(0x14e4, 0x170e, "tg3-5901_2", "Broadcom Tigon 3 5901_2"),
PCI_ROM(0x1148, 0x4400, "tg3-9DXX", "Syskonnect 9DXX"),
PCI_ROM(0x1148, 0x4500, "tg3-9MXX", "Syskonnect 9MXX"),
PCI_ROM(0x173b, 0x03e8, "tg3-ac1000", "Altima AC1000"),
PCI_ROM(0x173b, 0x03e9, "tg3-ac1001", "Altima AC1001"),
PCI_ROM(0x173b, 0x03ea, "tg3-ac9100", "Altima AC9100"),
PCI_ROM(0x173b, 0x03eb, "tg3-ac1003", "Altima AC1003"),
};
Auto-updated using perl -pi -0777 -e 's/static struct pci_driver (\w+) __pci_driver = {.*\.name\s*=\s*(\"\S+\").*\.probe\s*=\s*(\w+).*\.ids\s*=\s*(\w+).*\.class\s*=\s*(\w+).*?};/static struct pci_driver $1 =\n\tPCI_DRIVER ( $2, $4, $5 );\n\nBOOT_DRIVER ( $2, $3 );/ms' *.c perl -pi -e 's/(PCI_DRIVER \(.*, )0 \);/${1}PCI_NO_CLASS );/' *.c
2005-04-12 23:05:00 +00:00
static struct pci_driver tg3_driver =
PCI_DRIVER ( "TG3", tg3_nics, PCI_NO_CLASS );
BOOT_DRIVER ( "TG3", tg3_probe );
Reference in New Issue Copy Permalink