2
0
mirror of https://github.com/xcat2/xNBA.git synced 2024-12-16 08:11:31 +00:00
xNBA/src/drivers/net/forcedeth.c

1040 lines
29 KiB
C
Raw Normal View History

2005-03-08 18:53:11 +00:00
/**************************************************************************
* forcedeth.c -- Etherboot device driver for the NVIDIA nForce
* media access controllers.
*
* Note: This driver is based on the Linux driver that was based on
* a cleanroom reimplementation which was based on reverse
* engineered documentation written by Carl-Daniel Hailfinger
* and Andrew de Quincey. It's neither supported nor endorsed
* by NVIDIA Corp. Use at your own risk.
*
* Written 2004 by Timothy Legge <tlegge@rogers.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Portions of this code based on:
* forcedeth: Ethernet driver for NVIDIA nForce media access controllers:
*
* (C) 2003 Manfred Spraul
* See Linux Driver for full information
*
* Linux Driver Version 0.22, 19 Jan 2004
*
*
* REVISION HISTORY:
* ================
* v1.0 01-31-2004 timlegge Initial port of Linux driver
* v1.1 02-03-2004 timlegge Large Clean up, first release
*
* Indent Options: indent -kr -i8
***************************************************************************/
/* to get some global routines like printf */
#include "etherboot.h"
/* to get the interface to the body of the program */
#include "nic.h"
/* to get the PCI support functions, if this is a PCI NIC */
#include "pci.h"
/* Include timer support functions */
#include "timer.h"
#define drv_version "v1.1"
#define drv_date "02-03-2004"
//#define TFTM_DEBUG
#ifdef TFTM_DEBUG
#define dprintf(x) printf x
#else
#define dprintf(x)
#endif
typedef unsigned char u8;
typedef signed char s8;
typedef unsigned short u16;
typedef signed short s16;
typedef unsigned int u32;
typedef signed int s32;
/* Condensed operations for readability. */
#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
unsigned long BASE;
/* NIC specific static variables go here */
/*
* Hardware access:
*/
#define DEV_NEED_LASTPACKET1 0x0001
#define DEV_IRQMASK_1 0x0002
#define DEV_IRQMASK_2 0x0004
#define DEV_NEED_TIMERIRQ 0x0008
enum {
NvRegIrqStatus = 0x000,
#define NVREG_IRQSTAT_MIIEVENT 0040
#define NVREG_IRQSTAT_MASK 0x1ff
NvRegIrqMask = 0x004,
#define NVREG_IRQ_RX 0x0002
#define NVREG_IRQ_RX_NOBUF 0x0004
#define NVREG_IRQ_TX_ERR 0x0008
#define NVREG_IRQ_TX2 0x0010
#define NVREG_IRQ_TIMER 0x0020
#define NVREG_IRQ_LINK 0x0040
#define NVREG_IRQ_TX1 0x0100
#define NVREG_IRQMASK_WANTED_1 0x005f
#define NVREG_IRQMASK_WANTED_2 0x0147
#define NVREG_IRQ_UNKNOWN (~(NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1))
NvRegUnknownSetupReg6 = 0x008,
#define NVREG_UNKSETUP6_VAL 3
/*
* NVREG_POLL_DEFAULT is the interval length of the timer source on the nic
* NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms
*/
NvRegPollingInterval = 0x00c,
#define NVREG_POLL_DEFAULT 970
NvRegMisc1 = 0x080,
#define NVREG_MISC1_HD 0x02
#define NVREG_MISC1_FORCE 0x3b0f3c
NvRegTransmitterControl = 0x084,
#define NVREG_XMITCTL_START 0x01
NvRegTransmitterStatus = 0x088,
#define NVREG_XMITSTAT_BUSY 0x01
NvRegPacketFilterFlags = 0x8c,
#define NVREG_PFF_ALWAYS 0x7F0008
#define NVREG_PFF_PROMISC 0x80
#define NVREG_PFF_MYADDR 0x20
NvRegOffloadConfig = 0x90,
#define NVREG_OFFLOAD_HOMEPHY 0x601
#define NVREG_OFFLOAD_NORMAL 0x5ee
NvRegReceiverControl = 0x094,
#define NVREG_RCVCTL_START 0x01
NvRegReceiverStatus = 0x98,
#define NVREG_RCVSTAT_BUSY 0x01
NvRegRandomSeed = 0x9c,
#define NVREG_RNDSEED_MASK 0x00ff
#define NVREG_RNDSEED_FORCE 0x7f00
NvRegUnknownSetupReg1 = 0xA0,
#define NVREG_UNKSETUP1_VAL 0x16070f
NvRegUnknownSetupReg2 = 0xA4,
#define NVREG_UNKSETUP2_VAL 0x16
NvRegMacAddrA = 0xA8,
NvRegMacAddrB = 0xAC,
NvRegMulticastAddrA = 0xB0,
#define NVREG_MCASTADDRA_FORCE 0x01
NvRegMulticastAddrB = 0xB4,
NvRegMulticastMaskA = 0xB8,
NvRegMulticastMaskB = 0xBC,
NvRegTxRingPhysAddr = 0x100,
NvRegRxRingPhysAddr = 0x104,
NvRegRingSizes = 0x108,
#define NVREG_RINGSZ_TXSHIFT 0
#define NVREG_RINGSZ_RXSHIFT 16
NvRegUnknownTransmitterReg = 0x10c,
NvRegLinkSpeed = 0x110,
#define NVREG_LINKSPEED_FORCE 0x10000
#define NVREG_LINKSPEED_10 10
#define NVREG_LINKSPEED_100 100
#define NVREG_LINKSPEED_1000 1000
NvRegUnknownSetupReg5 = 0x130,
#define NVREG_UNKSETUP5_BIT31 (1<<31)
NvRegUnknownSetupReg3 = 0x134,
#define NVREG_UNKSETUP3_VAL1 0x200010
NvRegTxRxControl = 0x144,
#define NVREG_TXRXCTL_KICK 0x0001
#define NVREG_TXRXCTL_BIT1 0x0002
#define NVREG_TXRXCTL_BIT2 0x0004
#define NVREG_TXRXCTL_IDLE 0x0008
#define NVREG_TXRXCTL_RESET 0x0010
NvRegMIIStatus = 0x180,
#define NVREG_MIISTAT_ERROR 0x0001
#define NVREG_MIISTAT_LINKCHANGE 0x0008
#define NVREG_MIISTAT_MASK 0x000f
#define NVREG_MIISTAT_MASK2 0x000f
NvRegUnknownSetupReg4 = 0x184,
#define NVREG_UNKSETUP4_VAL 8
NvRegAdapterControl = 0x188,
#define NVREG_ADAPTCTL_START 0x02
#define NVREG_ADAPTCTL_LINKUP 0x04
#define NVREG_ADAPTCTL_PHYVALID 0x4000
#define NVREG_ADAPTCTL_RUNNING 0x100000
#define NVREG_ADAPTCTL_PHYSHIFT 24
NvRegMIISpeed = 0x18c,
#define NVREG_MIISPEED_BIT8 (1<<8)
#define NVREG_MIIDELAY 5
NvRegMIIControl = 0x190,
#define NVREG_MIICTL_INUSE 0x10000
#define NVREG_MIICTL_WRITE 0x08000
#define NVREG_MIICTL_ADDRSHIFT 5
NvRegMIIData = 0x194,
NvRegWakeUpFlags = 0x200,
#define NVREG_WAKEUPFLAGS_VAL 0x7770
#define NVREG_WAKEUPFLAGS_BUSYSHIFT 24
#define NVREG_WAKEUPFLAGS_ENABLESHIFT 16
#define NVREG_WAKEUPFLAGS_D3SHIFT 12
#define NVREG_WAKEUPFLAGS_D2SHIFT 8
#define NVREG_WAKEUPFLAGS_D1SHIFT 4
#define NVREG_WAKEUPFLAGS_D0SHIFT 0
#define NVREG_WAKEUPFLAGS_ACCEPT_MAGPAT 0x01
#define NVREG_WAKEUPFLAGS_ACCEPT_WAKEUPPAT 0x02
#define NVREG_WAKEUPFLAGS_ACCEPT_LINKCHANGE 0x04
NvRegPatternCRC = 0x204,
NvRegPatternMask = 0x208,
NvRegPowerCap = 0x268,
#define NVREG_POWERCAP_D3SUPP (1<<30)
#define NVREG_POWERCAP_D2SUPP (1<<26)
#define NVREG_POWERCAP_D1SUPP (1<<25)
NvRegPowerState = 0x26c,
#define NVREG_POWERSTATE_POWEREDUP 0x8000
#define NVREG_POWERSTATE_VALID 0x0100
#define NVREG_POWERSTATE_MASK 0x0003
#define NVREG_POWERSTATE_D0 0x0000
#define NVREG_POWERSTATE_D1 0x0001
#define NVREG_POWERSTATE_D2 0x0002
#define NVREG_POWERSTATE_D3 0x0003
};
#define NV_TX_LASTPACKET (1<<0)
#define NV_TX_RETRYERROR (1<<3)
#define NV_TX_LASTPACKET1 (1<<8)
#define NV_TX_DEFERRED (1<<10)
#define NV_TX_CARRIERLOST (1<<11)
#define NV_TX_LATECOLLISION (1<<12)
#define NV_TX_UNDERFLOW (1<<13)
#define NV_TX_ERROR (1<<14)
#define NV_TX_VALID (1<<15)
#define NV_RX_DESCRIPTORVALID (1<<0)
#define NV_RX_MISSEDFRAME (1<<1)
#define NV_RX_SUBSTRACT1 (1<<3)
#define NV_RX_ERROR1 (1<<7)
#define NV_RX_ERROR2 (1<<8)
#define NV_RX_ERROR3 (1<<9)
#define NV_RX_ERROR4 (1<<10)
#define NV_RX_CRCERR (1<<11)
#define NV_RX_OVERFLOW (1<<12)
#define NV_RX_FRAMINGERR (1<<13)
#define NV_RX_ERROR (1<<14)
#define NV_RX_AVAIL (1<<15)
/* Miscelaneous hardware related defines: */
#define NV_PCI_REGSZ 0x270
/* various timeout delays: all in usec */
#define NV_TXRX_RESET_DELAY 4
#define NV_TXSTOP_DELAY1 10
#define NV_TXSTOP_DELAY1MAX 500000
#define NV_TXSTOP_DELAY2 100
#define NV_RXSTOP_DELAY1 10
#define NV_RXSTOP_DELAY1MAX 500000
#define NV_RXSTOP_DELAY2 100
#define NV_SETUP5_DELAY 5
#define NV_SETUP5_DELAYMAX 50000
#define NV_POWERUP_DELAY 5
#define NV_POWERUP_DELAYMAX 5000
#define NV_MIIBUSY_DELAY 50
#define NV_MIIPHY_DELAY 10
#define NV_MIIPHY_DELAYMAX 10000
#define NV_WAKEUPPATTERNS 5
#define NV_WAKEUPMASKENTRIES 4
/* General driver defaults */
#define NV_WATCHDOG_TIMEO (2*HZ)
#define DEFAULT_MTU 1500 /* also maximum supported, at least for now */
#define RX_RING 4
#define TX_RING 2
/* limited to 1 packet until we understand NV_TX_LASTPACKET */
#define TX_LIMIT_STOP 10
#define TX_LIMIT_START 5
/* rx/tx mac addr + type + vlan + align + slack*/
#define RX_NIC_BUFSIZE (DEFAULT_MTU + 64)
/* even more slack */
#define RX_ALLOC_BUFSIZE (DEFAULT_MTU + 128)
#define OOM_REFILL (1+HZ/20)
#define POLL_WAIT (1+HZ/100)
struct ring_desc {
u32 PacketBuffer;
u16 Length;
u16 Flags;
};
/* Define the TX Descriptor */
static struct ring_desc tx_ring[TX_RING];
/* Create a static buffer of size RX_BUF_SZ for each
TX Descriptor. All descriptors point to a
part of this buffer */
static unsigned char txb[TX_RING * RX_NIC_BUFSIZE];
/* Define the TX Descriptor */
static struct ring_desc rx_ring[RX_RING];
/* Create a static buffer of size RX_BUF_SZ for each
RX Descriptor All descriptors point to a
part of this buffer */
static unsigned char rxb[RX_RING * RX_NIC_BUFSIZE];
/* Private Storage for the NIC */
struct forcedeth_private {
/* General data:
* Locking: spin_lock(&np->lock); */
int in_shutdown;
u32 linkspeed;
int duplex;
int phyaddr;
/* General data: RO fields */
u8 *ring_addr;
u32 orig_mac[2];
u32 irqmask;
/* rx specific fields.
* Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
*/
struct ring_desc *rx_ring;
unsigned int cur_rx, refill_rx;
struct sk_buff *rx_skbuff[RX_RING];
u32 rx_dma[RX_RING];
unsigned int rx_buf_sz;
/*
* tx specific fields.
*/
struct ring_desc *tx_ring;
unsigned int next_tx, nic_tx;
struct sk_buff *tx_skbuff[TX_RING];
u32 tx_dma[TX_RING];
u16 tx_flags;
} npx;
static struct forcedeth_private *np;
static inline void pci_push(u8 * base)
{
/* force out pending posted writes */
readl(base);
}
static int reg_delay(int offset, u32 mask,
u32 target, int delay, int delaymax, const char *msg)
{
u8 *base = (u8 *) BASE;
pci_push(base);
do {
udelay(delay);
delaymax -= delay;
if (delaymax < 0) {
if (msg)
printf(msg);
return 1;
}
} while ((readl(base + offset) & mask) != target);
return 0;
}
#define MII_READ (-1)
#define MII_PHYSID1 0x02 /* PHYS ID 1 */
#define MII_PHYSID2 0x03 /* PHYS ID 2 */
#define MII_BMCR 0x00 /* Basic mode control register */
#define MII_BMSR 0x01 /* Basic mode status register */
#define MII_ADVERTISE 0x04 /* Advertisement control reg */
#define MII_LPA 0x05 /* Link partner ability reg */
#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
/* Link partner ability register. */
#define LPA_SLCT 0x001f /* Same as advertise selector */
#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */
#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */
#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */
#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */
#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */
#define LPA_RESV 0x1c00 /* Unused... */
#define LPA_RFAULT 0x2000 /* Link partner faulted */
#define LPA_LPACK 0x4000 /* Link partner acked us */
#define LPA_NPAGE 0x8000 /* Next page bit */
/* mii_rw: read/write a register on the PHY.
*
* Caller must guarantee serialization
*/
static int mii_rw(struct nic *nic __unused, int addr, int miireg,
int value)
{
u8 *base = (u8 *) BASE;
int was_running;
u32 reg;
int retval;
writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
was_running = 0;
reg = readl(base + NvRegAdapterControl);
if (reg & NVREG_ADAPTCTL_RUNNING) {
was_running = 1;
writel(reg & ~NVREG_ADAPTCTL_RUNNING,
base + NvRegAdapterControl);
}
reg = readl(base + NvRegMIIControl);
if (reg & NVREG_MIICTL_INUSE) {
writel(NVREG_MIICTL_INUSE, base + NvRegMIIControl);
udelay(NV_MIIBUSY_DELAY);
}
reg =
NVREG_MIICTL_INUSE | (addr << NVREG_MIICTL_ADDRSHIFT) | miireg;
if (value != MII_READ) {
writel(value, base + NvRegMIIData);
reg |= NVREG_MIICTL_WRITE;
}
writel(reg, base + NvRegMIIControl);
if (reg_delay(NvRegMIIControl, NVREG_MIICTL_INUSE, 0,
NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX, NULL)) {
dprintf(("mii_rw of reg %d at PHY %d timed out.\n",
miireg, addr));
retval = -1;
} else if (value != MII_READ) {
/* it was a write operation - fewer failures are detectable */
dprintf(("mii_rw wrote 0x%x to reg %d at PHY %d\n",
value, miireg, addr));
retval = 0;
} else if (readl(base + NvRegMIIStatus) & NVREG_MIISTAT_ERROR) {
dprintf(("mii_rw of reg %d at PHY %d failed.\n",
miireg, addr));
retval = -1;
} else {
/* FIXME: why is that required? */
udelay(50);
retval = readl(base + NvRegMIIData);
dprintf(("mii_rw read from reg %d at PHY %d: 0x%x.\n",
miireg, addr, retval));
}
if (was_running) {
reg = readl(base + NvRegAdapterControl);
writel(reg | NVREG_ADAPTCTL_RUNNING,
base + NvRegAdapterControl);
}
return retval;
}
static void start_rx(struct nic *nic __unused)
{
u8 *base = (u8 *) BASE;
dprintf(("start_rx\n"));
/* Already running? Stop it. */
if (readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) {
writel(0, base + NvRegReceiverControl);
pci_push(base);
}
writel(np->linkspeed, base + NvRegLinkSpeed);
pci_push(base);
writel(NVREG_RCVCTL_START, base + NvRegReceiverControl);
pci_push(base);
}
static void stop_rx(void)
{
u8 *base = (u8 *) BASE;
dprintf(("stop_rx\n"));
writel(0, base + NvRegReceiverControl);
reg_delay(NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
"stop_rx: ReceiverStatus remained busy");
udelay(NV_RXSTOP_DELAY2);
writel(0, base + NvRegLinkSpeed);
}
static void start_tx(struct nic *nic __unused)
{
u8 *base = (u8 *) BASE;
dprintf(("start_tx\n"));
writel(NVREG_XMITCTL_START, base + NvRegTransmitterControl);
pci_push(base);
}
static void stop_tx(void)
{
u8 *base = (u8 *) BASE;
dprintf(("stop_tx\n"));
writel(0, base + NvRegTransmitterControl);
reg_delay(NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
"stop_tx: TransmitterStatus remained busy");
udelay(NV_TXSTOP_DELAY2);
writel(0, base + NvRegUnknownTransmitterReg);
}
static void txrx_reset(struct nic *nic __unused)
{
u8 *base = (u8 *) BASE;
dprintf(("txrx_reset\n"));
writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET,
base + NvRegTxRxControl);
pci_push(base);
udelay(NV_TXRX_RESET_DELAY);
writel(NVREG_TXRXCTL_BIT2, base + NvRegTxRxControl);
pci_push(base);
}
/*
* alloc_rx: fill rx ring entries.
* Return 1 if the allocations for the skbs failed and the
* rx engine is without Available descriptors
*/
static int alloc_rx(struct nic *nic __unused)
{
unsigned int refill_rx = np->refill_rx;
int i;
//while (np->cur_rx != refill_rx) {
for (i = 0; i < RX_RING; i++) {
//int nr = refill_rx % RX_RING;
rx_ring[i].PacketBuffer =
virt_to_le32desc(&rxb[i * RX_NIC_BUFSIZE]);
rx_ring[i].Length = cpu_to_le16(RX_NIC_BUFSIZE);
wmb();
rx_ring[i].Flags = cpu_to_le16(NV_RX_AVAIL);
/* printf("alloc_rx: Packet %d marked as Available\n",
refill_rx); */
refill_rx++;
}
np->refill_rx = refill_rx;
if (np->cur_rx - refill_rx == RX_RING)
return 1;
return 0;
}
static int update_linkspeed(struct nic *nic)
{
int adv, lpa, newdup;
u32 newls;
adv = mii_rw(nic, np->phyaddr, MII_ADVERTISE, MII_READ);
lpa = mii_rw(nic, np->phyaddr, MII_LPA, MII_READ);
dprintf(("update_linkspeed: PHY advertises 0x%hX, lpa 0x%hX.\n",
adv, lpa));
/* FIXME: handle parallel detection properly, handle gigabit ethernet */
lpa = lpa & adv;
if (lpa & LPA_100FULL) {
newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100;
newdup = 1;
} else if (lpa & LPA_100HALF) {
newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_100;
newdup = 0;
} else if (lpa & LPA_10FULL) {
newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
newdup = 1;
} else if (lpa & LPA_10HALF) {
newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
newdup = 0;
} else {
printf("bad ability %hX - falling back to 10HD.\n", lpa);
newls = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
newdup = 0;
}
if (np->duplex != newdup || np->linkspeed != newls) {
np->duplex = newdup;
np->linkspeed = newls;
return 1;
}
return 0;
}
static int init_ring(struct nic *nic)
{
int i;
np->next_tx = np->nic_tx = 0;
for (i = 0; i < TX_RING; i++) {
tx_ring[i].Flags = 0;
}
np->cur_rx = 0;
np->refill_rx = 0;
for (i = 0; i < RX_RING; i++) {
rx_ring[i].Flags = 0;
}
return alloc_rx(nic);
}
static void set_multicast(struct nic *nic)
{
u8 *base = (u8 *) BASE;
u32 addr[2];
u32 mask[2];
u32 pff;
u32 alwaysOff[2];
u32 alwaysOn[2];
memset(addr, 0, sizeof(addr));
memset(mask, 0, sizeof(mask));
pff = NVREG_PFF_MYADDR;
alwaysOn[0] = alwaysOn[1] = alwaysOff[0] = alwaysOff[1] = 0;
addr[0] = alwaysOn[0];
addr[1] = alwaysOn[1];
mask[0] = alwaysOn[0] | alwaysOff[0];
mask[1] = alwaysOn[1] | alwaysOff[1];
addr[0] |= NVREG_MCASTADDRA_FORCE;
pff |= NVREG_PFF_ALWAYS;
stop_rx();
writel(addr[0], base + NvRegMulticastAddrA);
writel(addr[1], base + NvRegMulticastAddrB);
writel(mask[0], base + NvRegMulticastMaskA);
writel(mask[1], base + NvRegMulticastMaskB);
writel(pff, base + NvRegPacketFilterFlags);
start_rx(nic);
}
/**************************************************************************
RESET - Reset the NIC to prepare for use
***************************************************************************/
static int forcedeth_reset(struct nic *nic)
{
u8 *base = (u8 *) BASE;
int ret, oom, i;
ret = 0;
dprintf(("forcedeth: open\n"));
/* 1) erase previous misconfiguration */
/* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
writel(0, base + NvRegMulticastAddrB);
writel(0, base + NvRegMulticastMaskA);
writel(0, base + NvRegMulticastMaskB);
writel(0, base + NvRegPacketFilterFlags);
writel(0, base + NvRegAdapterControl);
writel(0, base + NvRegLinkSpeed);
writel(0, base + NvRegUnknownTransmitterReg);
txrx_reset(nic);
writel(0, base + NvRegUnknownSetupReg6);
/* 2) initialize descriptor rings */
np->in_shutdown = 0;
oom = init_ring(nic);
/* 3) set mac address */
{
u32 mac[2];
mac[0] =
(nic->node_addr[0] << 0) + (nic->node_addr[1] << 8) +
(nic->node_addr[2] << 16) + (nic->node_addr[3] << 24);
mac[1] =
(nic->node_addr[4] << 0) + (nic->node_addr[5] << 8);
writel(mac[0], base + NvRegMacAddrA);
writel(mac[1], base + NvRegMacAddrB);
}
/* 4) continue setup */
np->linkspeed = NVREG_LINKSPEED_FORCE | NVREG_LINKSPEED_10;
np->duplex = 0;
writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
writel(0, base + NvRegTxRxControl);
pci_push(base);
writel(NVREG_TXRXCTL_BIT1, base + NvRegTxRxControl);
reg_delay(NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31,
NVREG_UNKSETUP5_BIT31, NV_SETUP5_DELAY,
NV_SETUP5_DELAYMAX,
"open: SetupReg5, Bit 31 remained off\n");
writel(0, base + NvRegUnknownSetupReg4);
/* 5) Find a suitable PHY */
writel(NVREG_MIISPEED_BIT8 | NVREG_MIIDELAY, base + NvRegMIISpeed);
for (i = 1; i < 32; i++) {
int id1, id2;
id1 = mii_rw(nic, i, MII_PHYSID1, MII_READ);
if (id1 < 0)
continue;
id2 = mii_rw(nic, i, MII_PHYSID2, MII_READ);
if (id2 < 0)
continue;
dprintf(("open: Found PHY %04x:%04x at address %d.\n",
id1, id2, i));
np->phyaddr = i;
update_linkspeed(nic);
break;
}
if (i == 32) {
printf("open: failing due to lack of suitable PHY.\n");
ret = -1;
goto out_drain;
}
printf("%d-Mbs Link, %s-Duplex\n",
np->linkspeed & NVREG_LINKSPEED_10 ? 10 : 100,
np->duplex ? "Full" : "Half");
/* 6) continue setup */
writel(NVREG_MISC1_FORCE | (np->duplex ? 0 : NVREG_MISC1_HD),
base + NvRegMisc1);
writel(readl(base + NvRegTransmitterStatus),
base + NvRegTransmitterStatus);
writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags);
writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig);
writel(readl(base + NvRegReceiverStatus),
base + NvRegReceiverStatus);
/* FIXME: I cheated and used the calculator to get a random number */
i = 75963081;
writel(NVREG_RNDSEED_FORCE | (i & NVREG_RNDSEED_MASK),
base + NvRegRandomSeed);
writel(NVREG_UNKSETUP1_VAL, base + NvRegUnknownSetupReg1);
writel(NVREG_UNKSETUP2_VAL, base + NvRegUnknownSetupReg2);
writel(NVREG_POLL_DEFAULT, base + NvRegPollingInterval);
writel(NVREG_UNKSETUP6_VAL, base + NvRegUnknownSetupReg6);
writel((np->
phyaddr << NVREG_ADAPTCTL_PHYSHIFT) |
NVREG_ADAPTCTL_PHYVALID, base + NvRegAdapterControl);
writel(NVREG_UNKSETUP4_VAL, base + NvRegUnknownSetupReg4);
writel(NVREG_WAKEUPFLAGS_VAL, base + NvRegWakeUpFlags);
/* 7) start packet processing */
writel((u32) virt_to_le32desc(&rx_ring[0]),
base + NvRegRxRingPhysAddr);
writel((u32) virt_to_le32desc(&tx_ring[0]),
base + NvRegTxRingPhysAddr);
writel(((RX_RING - 1) << NVREG_RINGSZ_RXSHIFT) +
((TX_RING - 1) << NVREG_RINGSZ_TXSHIFT),
base + NvRegRingSizes);
i = readl(base + NvRegPowerState);
if ((i & NVREG_POWERSTATE_POWEREDUP) == 0) {
writel(NVREG_POWERSTATE_POWEREDUP | i,
base + NvRegPowerState);
}
pci_push(base);
udelay(10);
writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID,
base + NvRegPowerState);
writel(NVREG_ADAPTCTL_RUNNING, base + NvRegAdapterControl);
writel(0, base + NvRegIrqMask);
pci_push(base);
writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
pci_push(base);
writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
pci_push(base);
/*
writel(np->irqmask, base + NvRegIrqMask);
*/
writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
writel(0, base + NvRegMulticastAddrB);
writel(0, base + NvRegMulticastMaskA);
writel(0, base + NvRegMulticastMaskB);
writel(NVREG_PFF_ALWAYS | NVREG_PFF_MYADDR,
base + NvRegPacketFilterFlags);
set_multicast(nic);
//start_rx(nic);
start_tx(nic);
if (!
(mii_rw(nic, np->phyaddr, MII_BMSR, MII_READ) &
BMSR_ANEGCOMPLETE)) {
printf("no link during initialization.\n");
}
udelay(10000);
out_drain:
return ret;
}
//extern void hex_dump(const char *data, const unsigned int len);
/**************************************************************************
POLL - Wait for a frame
***************************************************************************/
static int forcedeth_poll(struct nic *nic, int retrieve)
{
/* return true if there's an ethernet packet ready to read */
/* nic->packet should contain data on return */
/* nic->packetlen should contain length of data */
struct ring_desc *prd;
int len;
int i;
i = np->cur_rx % RX_RING;
prd = &rx_ring[i];
if ( ! (prd->Flags & cpu_to_le16(NV_RX_DESCRIPTORVALID)) ) {
return 0;
}
if ( ! retrieve ) return 1;
/* got a valid packet - forward it to the network core */
len = cpu_to_le16(prd->Length);
nic->packetlen = len;
//hex_dump(rxb + (i * RX_NIC_BUFSIZE), len);
memcpy(nic->packet, rxb +
(i * RX_NIC_BUFSIZE), nic->packetlen);
wmb();
np->cur_rx++;
alloc_rx(nic);
return 1;
}
/**************************************************************************
TRANSMIT - Transmit a frame
***************************************************************************/
static void forcedeth_transmit(struct nic *nic, const char *d, /* Destination */
unsigned int t, /* Type */
unsigned int s, /* size */
const char *p)
{ /* Packet */
/* send the packet to destination */
u8 *ptxb;
u16 nstype;
//u16 status;
u8 *base = (u8 *) BASE;
int nr = np->next_tx % TX_RING;
/* point to the current txb incase multiple tx_rings are used */
ptxb = txb + (nr * RX_NIC_BUFSIZE);
//np->tx_skbuff[nr] = ptxb;
/* copy the packet to ring buffer */
memcpy(ptxb, d, ETH_ALEN); /* dst */
memcpy(ptxb + ETH_ALEN, nic->node_addr, ETH_ALEN); /* src */
nstype = htons((u16) t); /* type */
memcpy(ptxb + 2 * ETH_ALEN, (u8 *) & nstype, 2); /* type */
memcpy(ptxb + ETH_HLEN, p, s);
s += ETH_HLEN;
while (s < ETH_ZLEN) /* pad to min length */
ptxb[s++] = '\0';
tx_ring[nr].PacketBuffer = (u32) virt_to_le32desc(ptxb);
tx_ring[nr].Length = cpu_to_le16(s - 1);
wmb();
tx_ring[nr].Flags = np->tx_flags;
writel(NVREG_TXRXCTL_KICK, base + NvRegTxRxControl);
pci_push(base);
tx_ring[nr].Flags = np->tx_flags;
np->next_tx++;
}
/**************************************************************************
DISABLE - Turn off ethernet interface
***************************************************************************/
static void forcedeth_disable(struct dev *dev __unused)
{
/* put the card in its initial state */
/* This function serves 3 purposes.
* This disables DMA and interrupts so we don't receive
* unexpected packets or interrupts from the card after
* etherboot has finished.
* This frees resources so etherboot may use
* this driver on another interface
* This allows etherboot to reinitialize the interface
* if something is something goes wrong.
*/
u8 *base = (u8 *) BASE;
np->in_shutdown = 1;
stop_tx();
stop_rx();
/* disable interrupts on the nic or we will lock up */
writel(0, base + NvRegIrqMask);
pci_push(base);
dprintf(("Irqmask is zero again\n"));
/* specia op:o write back the misordered MAC address - otherwise
* the next probe_nic would see a wrong address.
*/
writel(np->orig_mac[0], base + NvRegMacAddrA);
writel(np->orig_mac[1], base + NvRegMacAddrB);
}
/**************************************************************************
IRQ - Enable, Disable, or Force interrupts
***************************************************************************/
static void forcedeth_irq(struct nic *nic __unused, irq_action_t action __unused)
{
switch ( action ) {
case DISABLE :
break;
case ENABLE :
break;
case FORCE :
break;
}
}
/**************************************************************************
PROBE - Look for an adapter, this routine's visible to the outside
***************************************************************************/
#define IORESOURCE_MEM 0x00000200
#define board_found 1
#define valid_link 0
static int forcedeth_probe(struct dev *dev, struct pci_device *pci)
{
struct nic *nic = (struct nic *) dev;
unsigned long addr;
int sz;
u8 *base;
if (pci->ioaddr == 0)
return 0;
printf("forcedeth.c: Found %s, vendor=0x%hX, device=0x%hX\n",
pci->name, pci->vendor, pci->dev_id);
nic->irqno = 0;
nic->ioaddr = pci->ioaddr & ~3;
/* point to private storage */
np = &npx;
adjust_pci_device(pci);
addr = pci_bar_start(pci, PCI_BASE_ADDRESS_0);
sz = pci_bar_size(pci, PCI_BASE_ADDRESS_0);
/* BASE is used throughout to address the card */
BASE = (unsigned long) ioremap(addr, sz);
if (!BASE)
return 0;
//rx_ring[0] = rx_ring;
//tx_ring[0] = tx_ring;
/* read the mac address */
base = (u8 *) BASE;
np->orig_mac[0] = readl(base + NvRegMacAddrA);
np->orig_mac[1] = readl(base + NvRegMacAddrB);
nic->node_addr[0] = (np->orig_mac[1] >> 8) & 0xff;
nic->node_addr[1] = (np->orig_mac[1] >> 0) & 0xff;
nic->node_addr[2] = (np->orig_mac[0] >> 24) & 0xff;
nic->node_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
nic->node_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
nic->node_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
#ifdef LINUX
if (!is_valid_ether_addr(dev->dev_addr)) {
/*
* Bad mac address. At least one bios sets the mac address
* to 01:23:45:67:89:ab
*/
printk(KERN_ERR
"%s: Invalid Mac address detected: %02x:%02x:%02x:%02x:%02x:%02x\n",
pci_name(pci_dev), dev->dev_addr[0],
dev->dev_addr[1], dev->dev_addr[2],
dev->dev_addr[3], dev->dev_addr[4],
dev->dev_addr[5]);
printk(KERN_ERR
"Please complain to your hardware vendor. Switching to a random MAC.\n");
dev->dev_addr[0] = 0x00;
dev->dev_addr[1] = 0x00;
dev->dev_addr[2] = 0x6c;
get_random_bytes(&dev->dev_addr[3], 3);
}
#endif
printf("%s: MAC Address %!, ", pci->name, nic->node_addr);
np->tx_flags =
cpu_to_le16(NV_TX_LASTPACKET | NV_TX_LASTPACKET1 |
NV_TX_VALID);
switch (pci->dev_id) {
case 0x01C3: // nforce
np->irqmask = NVREG_IRQMASK_WANTED_2;
np->irqmask |= NVREG_IRQ_TIMER;
break;
case 0x0066: // nforce2
np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1);
np->irqmask = NVREG_IRQMASK_WANTED_2;
np->irqmask |= NVREG_IRQ_TIMER;
break;
case 0x00D6: // nforce3
np->tx_flags |= cpu_to_le16(NV_TX_LASTPACKET1);
np->irqmask = NVREG_IRQMASK_WANTED_2;
np->irqmask |= NVREG_IRQ_TIMER;
}
dprintf(("%s: forcedeth.c: subsystem: %hX:%hX bound to %s\n",
pci->name, pci->vendor, pci->dev_id, pci->name));
forcedeth_reset(nic);
// if (board_found && valid_link)
/* point to NIC specific routines */
dev->disable = forcedeth_disable;
nic->poll = forcedeth_poll;
nic->transmit = forcedeth_transmit;
nic->irq = forcedeth_irq;
return 1;
// }
/* else */
}
static struct pci_id forcedeth_nics[] = {
PCI_ROM(0x10de, 0x01C3, "nforce", "nForce Ethernet Controller"),
PCI_ROM(0x10de, 0x0066, "nforce2", "nForce2 Ethernet Controller"),
PCI_ROM(0x10de, 0x00D6, "nforce3", "nForce3 Ethernet Controller"),
};
static struct pci_driver forcedeth_driver __pci_driver = {
.type = NIC_DRIVER,
.name = "forcedeth",
.probe = forcedeth_probe,
.ids = forcedeth_nics,
.id_count = sizeof(forcedeth_nics) / sizeof(forcedeth_nics[0]),
.class = 0,
};