mirror of
https://github.com/xcat2/confluent.git
synced 2024-11-22 17:43:14 +00:00
145 lines
8.3 KiB
Markdown
145 lines
8.3 KiB
Markdown
nodediscover(8) -- List or manage confluent node discovery
|
|
=========================================================
|
|
|
|
## SYNOPSIS
|
|
|
|
`nodediscover rescan`
|
|
`nodediscover [options] list`
|
|
`nodediscover [options] assign`
|
|
`nodediscover [options] rescan`
|
|
`nodediscover [options] clear`
|
|
|
|
## DESCRIPTION
|
|
|
|
**nodediscover** provides streamlined access to the confluent discovery data
|
|
and assignment. Nodes are detected through either an active scan (as occurs
|
|
at service startup and on request by nodediscover rescan) or through passive
|
|
detection (as a target comes online, it may attempt to register with the
|
|
network).
|
|
|
|
**nodediscover list** provides the currently known data in tabular format. The
|
|
data may be filtered by various parameters, as denoted in the options below.
|
|
|
|
**nodediscover assign** performs manual discovery, assigning an entry to a node
|
|
identity or, using `-i`, using a csv file to assign nodes all at once. For
|
|
example, a spreadsheet of serial numbers to desired node names could be used.
|
|
|
|
**nodediscover rescan** requests the server to do an active sweep for new
|
|
devices. Generally every effort is made to passively detect devices as they
|
|
become available (as they boot or are plugged in), however sometimes an active
|
|
scan is the best approach to catch something that appears to be missing.
|
|
|
|
**nodedsicover clear** requests the server forget about a selection of
|
|
detected device. It takes the same arguments as **nodediscover list**.
|
|
|
|
## CSV FORMAT
|
|
|
|
The CSV format used by nodediscover consists of one header describing the
|
|
columns followed by the data. The available columns are:
|
|
|
|
* node: The name desired for the node in confluent
|
|
* groups: A comma delimited list of groups to put the node into (using normal CSV escape rules for the commas)
|
|
* mac: The mac address of the node
|
|
* serial: The serial number of the node
|
|
* uuid: The uuid of the node
|
|
* bmc: The name or ip address that should be assigned to the BMC, regardless of current address
|
|
* bmc_gateway: IP address of gateway, if desired
|
|
* bmcuser: The desired username for the BMC to have as administrator
|
|
* bmcpass: The desired password for the BMC to require
|
|
|
|
Note that node is the only mandatory field. To identify the systems, one of
|
|
mac, serial, or uuid should be specified, it is pointless to provide more than
|
|
one of these columns. Other attributes if not provided may be defined through
|
|
nodeattrib or group inherited. It is possible to define nodes without ever
|
|
providing a BMC ip, in which case IPv6 will be used automatically if possible.
|
|
|
|
One example of a valid CSV file would be:
|
|
node,serial,bmc,bmcuser,bmcpass
|
|
n1,06DPMDF,172.30.204.1,admin,Passw0rd12
|
|
n2,J30002HG,172.30.204.2,admin,Passw0rd12
|
|
|
|
Which would use the serial number to assign the name and other three values to
|
|
the nodes.
|
|
|
|
## OPTIONS
|
|
|
|
* `-m MODEL`, `--model=MODEL`:
|
|
Operate with nodes matching the specified model number
|
|
* `-s SERIAL`, `--serial=SERIAL`:
|
|
Operate against the system matching the specified
|
|
serial number
|
|
* `-u UUID`, `--uuid=UUID`:
|
|
Operate against the system matching the specified UUID
|
|
* `-n NODE`, `--node=NODE`:
|
|
Operate with the given nodename
|
|
* `-e MAC`, `--ethaddr=MAC`:
|
|
Operate against the system with the specified MAC
|
|
address
|
|
* `-f FIELDS`, `--fields=FIELDS`:
|
|
Request a custom set of fields. The available fields are:
|
|
Node: The node name if a correlation has been identified
|
|
Model: The model number
|
|
Serial: The serial number
|
|
UUID: The UUID as it should appear in DMI
|
|
Type: Device type (e.g. lenovo-xcc, pxe-client, etc)
|
|
IP: The confirmed working IP addresses associated with the record
|
|
Mac: Mac address of the relevant network interface
|
|
Switch: The nearest detected switch to the entry
|
|
Port: Port of the switch that most closely connects to the network interface
|
|
Advertised IP: IP addresses that may not have been confirmed, but are advertised
|
|
* `-o ORDER`, `--order=ORDER`:
|
|
Order output by given field. Field names are the same as documented in the -f argument.
|
|
* `-t TYPE`, `--type=TYPE`:
|
|
Operate against the system of the specified type
|
|
* `-c`, `--csv`:
|
|
Use CSV formatted output
|
|
* `-i IMPORT.CSV`, `--import=IMPORT.CSV`:
|
|
Import bulk assignment data from given CSV file
|
|
* `-d STATE`, `--discoverystate=STATE`:
|
|
Indicate devices with a particular state. The states are listed below
|
|
* discovered: The device has been identified and has also had discovery
|
|
activities performed, including any relevant certificate
|
|
exchanges and deploying user and network configuration.
|
|
* identified: The device has been identified as to what node it is
|
|
supposed to be, however no active changes to the attributes
|
|
or device configuration has been performed. This is
|
|
generally discovery awaiting approval due to
|
|
discovery.policy specifying a strict security model.
|
|
* unidentified: A device has been sensed, but no node identity has been
|
|
established at all. It provides data that can be used
|
|
for nodediscover assign, as well as current IP addresses
|
|
that can be used for manual efforts as possible.
|
|
|
|
## EXAMPLES
|
|
|
|
* Listing all detected Lenovo IMMv2 systems on a local network:
|
|
`# nodediscover list -t lenovo-imm2`
|
|
` Node| Model| Serial| UUID| Mac Address| Type| Current IP Addresses`
|
|
`---------------|---------------|---------------|------------------------------------|-----------------|------------|------------------------------------------------`
|
|
` r2| 5463AC1| 06DPMDF|5f7133b8-c8cb-11e4-99a9-40f2e9b91018|40:f2:e9:b9:10:1d| lenovo-imm2| 172.30.204.1,fe80::42f2:e9ff:feb9:101d%eth1`
|
|
` | 7906AC1| 06PBX15|e98d483d-2759-11e1-8ffd-5cf3fc11249c|5c:f3:fc:11:24:9f| lenovo-imm2| 172.30.3.12,fe80::5ef3:fcff:fe11:249f%eth1`
|
|
` n1| 8737AC1| 23XXH41|14dd3ba6-5c38-11e1-931a-5cf3fc6e4680|5c:f3:fc:6e:13:e1| lenovo-imm2| 172.30.3.1,fe80::5ef3:fcff:fe6e:13e1%eth1`
|
|
` n7| 8737AC1| 23XXH32|79d2ce28-5cd5-11e1-8c86-5cf3fc6e46b0|5c:f3:fc:6e:13:f9| lenovo-imm2| 172.30.3.7,fe80::5ef3:fcff:fe6e:13f9%eth1`
|
|
` n8| 8737AC1| 23XXH49|551a8438-5cd5-11e1-8d6c-5cf3fc6e4708|5c:f3:fc:6e:14:25| lenovo-imm2| 172.30.3.8,fe80::5ef3:fcff:fe6e:1425%eth1`
|
|
` n3| 8737AC1| 23XXH30|1dd7f7b3-5da5-11e1-baf0-5cf3fc6e4738|5c:f3:fc:6e:14:3d| lenovo-imm2| 172.30.3.3,fe80::5ef3:fcff:fe6e:143d%eth1`
|
|
` n4| 8737AC1| 23XXH35|45b81dae-5d9b-11e1-8337-5cf3fc6e4858|5c:f3:fc:6e:14:cd| lenovo-imm2| 172.30.3.4,fe80::5ef3:fcff:fe6e:14cd%eth1`
|
|
` n11| 8737AC1| 23XXH12|31d90128-5c37-11e1-bdb7-5cf3fc6e4920|5c:f3:fc:6e:15:31| lenovo-imm2| 172.30.3.11,fe80::5ef3:fcff:fe6e:1531%eth1`
|
|
` n13| 8737AC1| 23XXH44|e23a138a-5cd3-11e1-8f3d-5cf3fc6e4950|5c:f3:fc:6e:15:49| lenovo-imm2| 172.30.3.13,fe80::5ef3:fcff:fe6e:1549%eth1`
|
|
` | 8737AC1| 23XXH29|5cd1216b-5c37-11e1-ba0c-5cf3fc6e49c8|5c:f3:fc:6e:15:85| lenovo-imm2| 172.30.3.9,fe80::5ef3:fcff:fe6e:1585%eth1`
|
|
` | 8737AC1| 23ZYT44|f4bf48ca-71f0-11e1-b274-5cf3fc6e4f10|5c:f3:fc:6e:18:29| lenovo-imm2| 172.30.3.10,fe80::5ef3:fcff:fe6e:1829%eth1`
|
|
` hpcedr| 7915AC1| 06DRHL5|a64e3014-d7e3-11e1-8d21-6cae8b1dff32|6c:ae:8b:1d:ff:36| lenovo-imm2| 172.30.254.250,fe80::6eae:8bff:fe1d:ff36%eth1`
|
|
` | 8737AC1| 06YRWC3|3af85a51-7efd-11e3-8599-000af7482e00|6c:ae:8b:32:cb:c5| lenovo-imm2| 172.30.3.6,fe80::6eae:8bff:fe32:cbc5%eth1`
|
|
` | 8737AC1| 06YRWB7|b230f62e-7efd-11e3-9773-000af7482980|6c:ae:8b:32:cd:01| lenovo-imm2| 172.30.3.5,fe80::6eae:8bff:fe32:cd01%eth1`
|
|
` | 8737AC1| 06YRWC7|09586005-7efe-11e3-9f03-000af7482df0|6c:ae:8b:32:cd:a5| lenovo-imm2| 172.30.3.2,fe80::6eae:8bff:fe32:cda5%eth1`
|
|
|
|
* Manually assign a single node according to serial number:
|
|
`[root@odin ~]# nodediscover assign -s 06PBX15 -n n12`
|
|
`Assigned: n12`
|
|
|
|
* Bulk execute discovery based on spreadsheet:
|
|
`[root@odin ~]# nodediscover assign -i import.csv`
|
|
`Defined r2`
|
|
`Discovered r2`
|
|
`Defined c1`
|
|
`Discovered c1`
|