Jarrod Johnson
008c1308b4
Handle nvm subsystem without driver.
...
A variant of the M.2 RAID enablement kit does not manifest with nvme
driver. Address this by allowing 'nvm' subsystype. to allow blank driver.
Also, to be on the safe side, have self.driver always be a string,
so it can be 'falsey' but still work as a string.
2024-10-26 08:16:56 -04:00
Jarrod Johnson
f68f9f4693
Make syncfile step robust or pause
...
If syncfiles fails, keep it retrying.
Also, slow down sync checking to avoid hammering the system.
Further, randomized delay to spread highly synchronized requestors.
Block attempts to do multiple concurrent syncfile runs.
2024-04-09 11:07:11 -04:00
Jarrod Johnson
68ce3d039d
Filter out nvme 'c' devnames, that are used to refer to paths to nvme
...
Some versions start manifesting nvme devnames with 'c', which
are to be used to interact with multipath to have raw devices
backing a traditional nvme device.
2023-11-27 08:34:34 -05:00
Jarrod Johnson
0b7247d386
Fix CentOS 7 routed deployment with identity image
...
Numerous issues prevented the identity image support from actually running,
correct them.
2023-08-10 16:27:42 -04:00
Jarrod Johnson
e9dd7da775
Fix syntax error in el7 identity image support
2023-06-02 08:55:27 -04:00
Jarrod Johnson
bc684b82b4
Implement identity image based deployment for EL7
...
Though older, it is still popularly used.
2023-06-01 16:49:17 -04:00
Jarrod Johnson
7ab2aff7f2
Restore syntax of EL7 deployment
...
Inadvertent incomplete checkin
broke syntax of EL7, fix to have it
work as-is for now.
2023-06-01 09:20:17 -04:00
Jarrod Johnson
c3fc931ba4
Fix python2 compatibility issue for port forwarding
...
The measure for predictable port numbering
was done with python3 in mind, without consideration
of python2.
2023-06-01 09:18:36 -04:00
Jarrod Johnson
305a3a06d2
Ensure $HOME is set during firstboot
...
systemd tends not to set environment variables. However some firstboot
scripts generally expect $HOME to be correct.
2023-04-12 11:22:27 -04:00
Jarrod Johnson
872718c658
Add notation about alternate location of ansible plays
...
Make it known that plays may now be private.
2023-03-16 15:19:15 -04:00
Jarrod Johnson
bb7a72db65
Fix for ipv6 deployment
...
Need to avoid double-bracketing of the server and also disable globbing
so curl does not mistake the ip address for a glob attempt.
2023-02-13 09:36:42 -05:00
Jarrod Johnson
20e6e1e521
Refresh functions to cope with v6-only usage
2022-11-08 08:52:29 -05:00
Jarrod Johnson
4cb222068f
Sync up EL7 syncfileclient
2022-10-05 11:53:59 -04:00
Jarrod Johnson
b98759698a
Sync up getinstalldisk and add another m.2 model
2022-09-01 13:22:50 -04:00
Jarrod Johnson
e0c3232180
Fix syntax error in el7 prescript
2022-06-17 09:30:26 -04:00
Jarrod Johnson
bd95f00680
Fix EL7 typeo in postscript
2022-06-17 09:08:12 -04:00
Jarrod Johnson
7aca7a19f9
Install apiclient in a normal location for EL7
2022-06-15 16:42:50 -04:00
Jarrod Johnson
c400671ad7
Add old profile compatible apiclient location
2022-06-15 16:39:55 -04:00
Jarrod Johnson
2bb519c158
Fix EL7 deployment compatibility
2022-06-15 16:10:57 -04:00
Jarrod Johnson
5fb766e62b
Move apiclient consistently to /opt/confluent/bin
...
It's more reasonable to have
it in a bin directory
2022-03-03 11:11:29 -05:00
Jarrod Johnson
9f071c1fdb
Provide more details in example syncfiles
2022-01-20 14:10:30 -05:00
Jarrod Johnson
181f704331
Correct configbmc misidentification of lan chan
...
The lan channel get mac address was incorrect, change
to correctly request.
2022-01-10 09:29:40 -05:00
Jarrod Johnson
02da50af8b
Tighter permissions on /var/log/confluent
2021-12-08 07:42:19 -05:00
Jarrod Johnson
77de3ab25b
Apply more restrictive permissions to /var/log/confluent/
...
While confluent shouldn't put anything sensitive in the log, custom
content may. To mitigate the risk, it will now lock down the
log permissions.
2021-12-07 07:21:04 -05:00
Jarrod Johnson
224663d0c8
Fix execution of confluent functions after run_remote_python
2021-10-29 13:50:04 -04:00
Jarrod Johnson
729408a0cb
Fix run_remote aafter the cleanup was added
...
The removal of the temp dir needed to be linked with
whether the script was dedicated or shared tmp with a run_remote_parts.
2021-10-29 13:01:59 -04:00
Jarrod Johnson
8eb6ce0b69
Specify absolute path for mktemp
...
mktemp defaults to relative, to produce the correct
behavior, must be absolute template.
2021-10-25 12:03:26 -04:00
Jarrod Johnson
957679db3c
Update syncfile examples and el7 support
2021-10-15 16:24:22 -04:00
Jarrod Johnson
f33ed9b4d9
Cleanup after script execution
...
Leave cleaner tmp directories when functions are ran.
2021-10-15 12:16:48 -04:00
Jarrod Johnson
04dd374bfb
Synchronize functions across the supported OSes
2021-10-15 12:10:24 -04:00
Jarrod Johnson
57f346fa4c
Implement syncfiles parameters
...
chmod and chown as directed
by the syncfiles file if present
2021-10-08 10:27:57 -04:00
Jarrod Johnson
3b7e7afc24
Fix inconsistent handling of marginal id in syncfileclient
...
Also, resynchronize syncfileclient across the distributions.
2021-10-07 12:36:52 -04:00
Jarrod Johnson
6acd3c2b7d
Add ability to execute functions as a command
...
This gives easier access over nodeshell and similar to run functions by executing the
functions as a script with arguments.
2021-09-20 08:00:35 -04:00
Jarrod Johnson
06e32c53cc
Fix overly vague extraction of deploy_server
...
If deploy_server appears anywhere, it confuses
the scripts
2021-09-13 10:23:13 -04:00
Jarrod Johnson
6bf51a20b2
Set nodename as hostname prior to post for el class distros
2021-08-26 09:33:16 -04:00
Jarrod Johnson
225618ef75
Add stall in firstboot for deployer to be available
2021-08-09 15:19:36 -04:00
Jarrod Johnson
663f8fc085
Add nodename to set_confluent_vars
...
It is expected that nodename would also be set.
2021-07-23 19:08:06 -04:00
Jarrod Johnson
b291dee68c
Add bind-utils, skip iwl*-firmware, and alphabatize packages
2021-07-08 11:38:50 -04:00
Jarrod Johnson
38a4e20b9a
Fix issues around imageboot and source in functions
2021-06-15 08:31:45 -04:00
Jarrod Johnson
763feda63b
Fix missed references to old variable names
2021-05-03 15:54:39 -04:00
Jarrod Johnson
d17b1d060c
Prepend confluent_ to vars and switch to explicitly requesting directory
...
The 'profile' variable notably induces dracut to be excruciatingly slow,
mitigate chance by putting confluent before apikey, mgr, and profile.
Further, it has been requested to have the scripts use same name on
server for directory moving forward. Implement this request while
allowing existing OS profiles to keep working.
2021-05-03 12:48:08 -04:00
Jarrod Johnson
fcb4b33e8e
Include stderr in the script execution logs
2021-05-03 08:57:59 -04:00
Jarrod Johnson
b5b9631b3f
Correct typo in pre script
2021-04-30 16:27:16 -04:00
Jarrod Johnson
bb05f72583
Add source_remote_parts
...
This function will enable a script to invoke multiple
pieces in same variable/function context
2021-04-30 14:33:02 -04:00
Jarrod Johnson
68b4f83627
Have firstboot script be logged better
...
Also show on screen firstboot script execution.
2021-04-30 14:08:42 -04:00
Jarrod Johnson
672bc4f754
Amend postscript logging strategy
...
This adjusts to avoid hangs in
anaconda
2021-04-30 13:38:31 -04:00
Jarrod Johnson
4df3fda8ea
Change logging/display for RH oses
...
The pre and post phases are
desirable to see both in logs and consoles.
Unfortunately, anaconda cheaps out by using communicate(), which means
the logs are unwritten until the end.
Change by using bash's redirectiors
to create a dynamically updated logfile
and tail -f that.
2021-04-30 09:39:00 -04:00
Jarrod Johnson
f32619aa3e
Allow firstboot to reboot in RH postscripts
...
Sometimes firstboot scripts want to reboot.
In such a case, start firstboot once, and if reboot prevents completion,
then next boot will updatestatus, but not run firstboot scripts and
deregister itself.
2021-04-29 09:20:24 -04:00
Jarrod Johnson
0e55d390e3
Fix up post output to console
2021-04-28 13:46:26 -04:00
Jarrod Johnson
002146b2f7
Try to output pre/post content to console during install
2021-04-28 13:27:34 -04:00
